Add the wakeup enable register to the list of OMAP-specific UART
registers.  This is to support forthcoming OMAP PM enhancements which
use the wakeup feature of the OMAP's 8250-based UART.
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the replicated urban legends from the comments and fix a couple of
other silly calls
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ppp layer goes around calling the unthrottle method from non sleeping
paths. This isn't safe because the unthrottle methods in the tty layer need
to be able to sleep (consider a USB dongle).

Until now this didn't show up because the ppp layer never actually throttled
a port so the unthrottle was always a no-op. Currently it's a mutex taking
path so warnings are spewed if the unthrottle occurs via certain paths.

Fix this by removing the unneccessary unthrottle calls.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't return from switch/case directly in vt_ioctl. Set ret and break
instead so that we unlock BKL.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't return from switch/case, break instead, so that we unlock BKL.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is omitted BKunL in r3964_read.

Centralize the paths to one point with one unlock.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In zs_console_putchar() occurs:

	if (zs_transmit_drain(zport, irq))
		write_zsdata(zport, ch);

However if in zs_transmit_drain() no empty Tx Buffer occurs, limit reaches
-1 => true, and the write still occurs.

This patch changes postfix to prefix decrements in this and similar
functions to prevent similar mistakes in the future.  This decreases the
iterations with one but the chosen loop count was arbitrary anyway.

In sunhv limit reaches -1, not 0, so the test is off by one.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since early printk only makes sense/works when the serial driver is built
into the kernel, disable the option for this driver when it is going to be
built as a module.  Otherwise we get build failures due to the ifdef
handling.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Blackfin serial driver never initialized the spin_lock that is part of
the serial core structure, but we never noticed because spin_lock's are
rarely enabled on UP systems.  Yeah lockdep and friends.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The original patch garned some feedback and a v2 was posted, but that
version seems to have been missed when merging the driver.

At any rate, this cleans up the printk usage as suggested by Jiri Slaby.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

parport_pc_probe_port() creates the own 'parport_pc' device if the
device argument is NULL. Then parport_pc_probe_port() doesn't
initialize the dma_mask and coherent_dma_mask of the device and calls
dma_alloc_coherent with it. dma_alloc_coherent fails because
dma_alloc_coherent() doesn't accept the uninitialized dma_mask:

http://lkml.org/lkml/2009/6/16/150

Long ago, X86_32 and X86_64 had the own dma_alloc_coherent
implementations; X86_32 accepted a device having dma_mask that is not
initialized however X86_64 didn't. When we merged them, we chose to
prohibit a device having dma_mask that is not initialized. I think
that it's good to require drivers to set up dma_mask (and
coherent_dma_mask) properly if the drivers want DMA.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reported-by: NMalcom Blaney <malcolm.blaney@maptek.com.au>
Tested-by: NMalcom Blaney <malcolm.blaney@maptek.com.au>
Cc: stable@kernel.org
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_PARPORT_PC_SUPERIO probes for various superio chips by writing
byte sequences to a set of different potential I/O ranges.  But the
probed ranges are not exclusive to parallel ports.  Some of our boards
just happen to have a watchdog in one of them.  Took us almost a week
to figure out why some distros reboot without warning after running
flawlessly for 3 hours.  For exactly 170 = 0xAA minutes, that is ...

Fixed by restoring original values after probing.  Also fixed too small
request_region() in detect_and_report_it87().
Signed-off-by: NJens Rottmann <JRottmann@LiPPERTEmbedded.de>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: <stable@kernel.org>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit a90b0375, which
already got fixed as commit f0e85277:
the same patch (trivial differences) got applied twice.
Requested-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: remove needless double parenthesis
  sdhci: Specific quirk vor VIA SDHCI controller in VX855ES
  s3cmci: fix dma configuration call
  mmc: Add new via-sdmmc host controller driver
  sdhci: Add support for hosts that are only capable of 1-bit transfers
  MAINTAINERS: add myself as atmel-mci maintainer (sd/mmc interface)
  sdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirk
  sdhci: Add better ADMA error reporting
  sdhci-s3c: Samsung S3C based SDHCI controller glue

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aes-ni - Remove CRYPTO_TFM_REQ_MAY_SLEEP from fpu template
  crypto: aes-ni - Do not sleep when using the FPU
  crypto: aes-ni - Fix cbc mode IV saving
  crypto: padlock-aes - work around Nano CPU errata in CBC mode
  crypto: padlock-aes - work around Nano CPU errata in ECB mode

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: Select frame pointers on x86
  dma-debug: be more careful when building reference entries
  dma-debug: check for sg_call_ents in best-fit algorithm too

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add model=6530g option
  ALSA: hda - Acer Inspire 6530G model for Realtek ALC888
  ALSA: snd_usb_caiaq: fix legacy input streaming
  ASoC: Kill BUS_ID_SIZE
  ALSA: HDA - Correct trivial typos in comments.
  ALSA: HDA - Name-fixes in code (tagra/targa)
  ALSA: HDA - Add pci-quirk for MSI MS-7350 motherboard.
  ALSA: hda - Fix memory leak at codec creation

This allows the callers to now pass down the full set of FAULT_FLAG_xyz
flags to handle_mm_fault().  All callers have been (mechanically)
converted to the new calling convention, there's almost certainly room
for architectures to clean up their code and then add FAULT_FLAG_RETRY
when that support is added.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fault handling routines really want more fine-grained flags than a
single "was it a write fault" boolean - the callers will want to set
flags like "you can return a retry error" etc.

And that's actually how the VM works internally, but right now the
top-level fault handling functions in mm/memory.c all pass just the
'write_access' boolean around.

This switches them over to pass around the FAULT_FLAG_xyzzy 'flags'
variable instead.  The 'write_access' calling convention still exists
for the exported 'handle_mm_fault()' function, but that is next.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

31a985f "ipc: use __ARCH_WANT_IPC_PARSE_VERSION in ipc/util.h" would
choose the implementation of ipc_parse_version() based on a symbol
defined in <asm/unistd.h>.

But it failed to also include this header and thus broke
IPC_64-passing 32-bit userspace because the flag wasn't masked out
properly anymore and the command not understood.

Include <linux/unistd.h> to give the architecture a chance to ask for
the no-no-op ipc_parse_version().
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPierre Ossman <pierre@ossman.eu>

The SDHCI controller found in the VX855ES requires 10ms
delay between applying power and applying clock.

This issue has been discovered and documented by the OLPC XO1.5 team.
Signed-off-by: NHarald Welte <HaraldWelte@viatech.com>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

This was missed in the DMA changes during the s3c24xx
updates in commit 8970ef47.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

This adds the via-sdmmc driver for the SD/MMC-controller of VIA,
which is found in a number of recent integrated VIA chipset
products.
Signed-off-by: NHarald Welte <HaraldWelte@viatech.com>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

Some hosts (hardware configurations, or particular SD/MMC slots) may
not support 4-bit bus. For example, on MPC8569E-MDS boards we can
switch between serial (1-bit only) and nibble (4-bit) modes, thought
we have to disable more peripherals to work in 4-bit mode.

Along with some small core changes, this patch modifies sdhci-of
driver, so that now it looks for "sdhci,1-bit-only" property in the
device-tree, and if specified we enable a proper quirk.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

Add MAINTAINERS entry for atmel-mci driver.
This driver was maintained by its author: Haavard Skinnemoen. I take the
maintainance of it.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

Add quirk to show the controller cannot do multi-block IO.

This is mainly for the Samsung SDHCI controller that currently
cannot manage to do multi-block PIO without timing out.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

Update the ADMA error reporting to not only show the
overall controller state but also to print the ADMA
descriptor list.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

Add support for the 'HSMMC' block(s) in the Samsung SoC
line. These are compatible with the SDHCI driver so add
the necessary setup and driver binding for the platform
devices.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

* topic/hda:
  ALSA: hda - Add model=6530g option
  ALSA: hda - Acer Inspire 6530G model for Realtek ALC888
  ALSA: HDA - Correct trivial typos in comments.
  ALSA: HDA - Name-fixes in code (tagra/targa)
  ALSA: HDA - Add pci-quirk for MSI MS-7350 motherboard.
  ALSA: hda - Fix memory leak at codec creation

* topic/caiaq:
  ALSA: snd_usb_caiaq: fix legacy input streaming

* topic/asoc:
  ASoC: Kill BUS_ID_SIZE

Add the new model string corresponding to the previous Acer Aspire
6530G support.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The selected 4930G model seemed to keep the subwoofer 'tuba'
function from operating correctly. Removing the existing PCI
ID match made this work again, but it was mapped to 'Side'
instead of to LFE as one would expect.
This attempts to enable all functionality and keep the amount
of available mixer sliders low. Any slider that had no audible
effect on the output audio has been removed, and as such EAPD
is not currently enabled.
Signed-off-by: NTony Vroon <tony@linx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

x86 stack traces are a piece of crap without frame pointers, and its not
like the 'performance gain' of not having stack pointers matters when you
selected lockdep.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
LKML-Reference: <new-submission>
Cc: <stable@kernel.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

da456f14 "page allocator: do not disable interrupts in free_page_mlock()" moved
the PG_mlocked clearing after the flag sanity checking which makes mlocked
pages always trigger 'bad page'.  Fix this by clearing the bit up front.
Reported--and-debugged-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Tested-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The discussion about using "access_ok()" in get_user_pages_fast() (see
commit 7f818906: "x86: don't use
'access_ok()' as a range check in get_user_pages_fast()" for details and
end result), made us notice that x86-64 was really being very sloppy
about virtual address checking.

So be way more careful and straightforward about masking x86-64 virtual
addresses:

 - All the VIRTUAL_MASK* variants now cover half of the address
   space, it's not like we can use the full mask on a signed
   integer, and the larger mask just invites mistakes when
   applying it to either half of the 48-bit address space.

 - /proc/kcore's kc_offset_to_vaddr() becomes a lot more
   obvious when it transforms a file offset into a
   (kernel-half) virtual address.

 - Unify/simplify the 32-bit and 64-bit USER_DS definition to
   be based on TASK_SIZE_MAX.

This cleanup and more careful/obvious user virtual address checking also
uncovered a buglet in the x86-64 implementation of strnlen_user(): it
would do an "access_ok()" check on the whole potential area, even if the
string itself was much shorter, and thus return an error even for valid
strings. Our sloppy checking had hidden this.

So this fixes 'strnlen_user()' to do this properly, the same way we
already handled user strings in 'strncpy_from_user()'.  Namely by just
checking the first byte, and then relying on fault handling for the
rest.  That always works, since we impose a guard page that cannot be
mapped at the end of the user space address space (and even if we
didn't, we'd have the address space hole).
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq, irq.h: Fix kernel-doc warnings
  genirq: fix comment to say IRQ_WAKE_THREAD

Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
  perfcounter: Handle some IO return values
  perf_counter: Push perf_sample_data through the swcounter code
  perf_counter tools: Define and use our own u64, s64 etc. definitions
  perf_counter: Close race in perf_lock_task_context()
  perf_counter, x86: Improve interactions with fast-gup
  perf_counter: Simplify and fix task migration counting
  perf_counter tools: Add a data file header
  perf_counter: Update userspace callchain sampling uses
  perf_counter: Make callchain samples extensible
  perf report: Filter to parent set by default
  perf_counter tools: Handle lost events
  perf_counter: Add event overlow handling
  fs: Provide empty .set_page_dirty() aop for anon inodes
  perf_counter: tools: Makefile tweaks for 64-bit powerpc
  perf_counter: powerpc: Add processor back-end for MPC7450 family
  perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels
  perf_counter: powerpc: Change how processor-specific back-ends get selected
  perf_counter: powerpc: Use unsigned long for register and constraint values
  perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
  perf_counter tools: Add and use isprint()
  ...

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix out of scope variable access in sched_slice()
  sched: Hide runqueues from direct refer at source code level
  sched: Remove unneeded __ref tag
  sched, x86: Fix cpufreq + sched_clock() TSC scaling