From ffb810563c0c049872a504978e06c8892104fb6c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 10 Apr 2016 05:59:10 +0200 Subject: [PATCH] intel_pstate: Avoid getting stuck in high P-states when idle MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Jörg Otte reports that commit a4675fbc4a7a (cpufreq: intel_pstate: Replace timers with utilization update callbacks) caused the CPUs in his Haswell-based system to stay in the very high frequency region even if the system is completely idle. That turns out to be an existing problem in the intel_pstate driver's P-state selection algorithm for Core processors. Namely, all decisions made by that algorithm are based on the average frequency of the CPU between sampling events and on the P-state requested on the last invocation, so it may get stuck at a very hight frequency even if the utilization of the CPU is very low (in fact, it may get stuck in a inadequate P-state regardless of the CPU utilization). The only way to kick it out of that limbo is a sufficiently long idle period (3 times longer than the prescribed sampling interval), but if that doesn't happen often enough (eg. due to a timing change like after the above commit), the P-state of the CPU may be inadequate pretty much all the time. To address the most egregious manifestations of that issue, reset the core_busy value used to determine the next P-state to request if the utilization of the CPU, determined with the help of the MPERF feedback register and the TSC, is below 1%. Link: https://bugzilla.kernel.org/show_bug.cgi?id=115771 Reported-and-tested-by: Jörg Otte Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 8b5a415ee14a..30fe323c4551 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1130,6 +1130,10 @@ static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu) sample_ratio = div_fp(int_tofp(pid_params.sample_rate_ns), int_tofp(duration_ns)); core_busy = mul_fp(core_busy, sample_ratio); + } else { + sample_ratio = div_fp(100 * cpu->sample.mperf, cpu->sample.tsc); + if (sample_ratio < int_tofp(1)) + core_busy = 0; } cpu->sample.busy_scaled = core_busy; -- GitLab