Move lis3lv02d drivers to drivers/misc

The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Tested-by: NEric Piel <eric.piel@tremplin-utc.net>
Tested-by: NTakashi Iwai <tiwai@suse.de>

MAINTAINERS

@@ -3913,8 +3913,8 @@ S:	Supported
 LIS3LV02D ACCELEROMETER DRIVER
 M:	Eric Piel <eric.piel@tremplin-utc.net>
 S:	Maintained
-F:	Documentation/hwmon/lis3lv02d
-F:	drivers/hwmon/lis3lv02d.*
+F:	Documentation/misc-devices/lis3lv02d
+F:	drivers/misc/lis3lv02d/
 
 LLC (802.2)
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

drivers/hwmon/Kconfig

@@ -2,12 +2,6 @@
 # Hardware monitoring chip drivers configuration
 #
 
-config SENSORS_LIS3LV02D
-	tristate
-	depends on INPUT
-	select INPUT_POLLDEV
-	default n
-
 menuconfig HWMON
 	tristate "Hardware Monitoring support"
 	depends on HAS_IOMEM
@@ -1221,40 +1215,6 @@ config SENSORS_ULTRA45
 	  This driver provides support for the Ultra45 workstation environmental
 	  sensors.
 
-config SENSORS_LIS3_SPI
-	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
-	depends on !ACPI && SPI_MASTER && INPUT
-	select SENSORS_LIS3LV02D
-	default n
-	help
-	  This driver provides support for the LIS3LV02Dx accelerometer connected
-	  via SPI. The accelerometer data is readable via
-	  /sys/devices/platform/lis3lv02d.
-
-	  This driver also provides an absolute input class device, allowing
-	  the laptop to act as a pinball machine-esque joystick.
-
-	  This driver can also be built as modules.  If so, the core module
-	  will be called lis3lv02d and a specific module for the SPI transport
-	  is called lis3lv02d_spi.
-
-config SENSORS_LIS3_I2C
-	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
-	depends on I2C && INPUT
-	select SENSORS_LIS3LV02D
-	default n
-	help
-	  This driver provides support for the LIS3LV02Dx accelerometer connected
-	  via I2C. The accelerometer data is readable via
-	  /sys/devices/platform/lis3lv02d.
-
-	  This driver also provides an absolute input class device, allowing
-	  the device to act as a pinball machine-esque joystick.
-
-	  This driver can also be built as modules.  If so, the core module
-	  will be called lis3lv02d and a specific module for the I2C transport
-	  is called lis3lv02d_i2c.
-
 config SENSORS_APPLESMC
 	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
 	depends on INPUT && X86

drivers/hwmon/Makefile

@@ -5,9 +5,6 @@
 obj-$(CONFIG_HWMON)		+= hwmon.o
 obj-$(CONFIG_HWMON_VID)		+= hwmon-vid.o
 
-# Helper drivers
-obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o
-
 # APCI drivers
 obj-$(CONFIG_SENSORS_ATK0110)	+= asus_atk0110.o
 
@@ -66,8 +63,6 @@ obj-$(CONFIG_SENSORS_JZ4740)	+= jz4740-hwmon.o
 obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
 obj-$(CONFIG_SENSORS_K10TEMP)	+= k10temp.o
 obj-$(CONFIG_SENSORS_LINEAGE)	+= lineage-pem.o
-obj-$(CONFIG_SENSORS_LIS3_SPI)	+= lis3lv02d_spi.o
-obj-$(CONFIG_SENSORS_LIS3_I2C)	+= lis3lv02d_i2c.o
 obj-$(CONFIG_SENSORS_LM63)	+= lm63.o
 obj-$(CONFIG_SENSORS_LM70)	+= lm70.o
 obj-$(CONFIG_SENSORS_LM73)	+= lm73.o

drivers/misc/Kconfig

@@ -2,6 +2,14 @@
 # Misc strange devices
 #
 
+# This one has to live outside of the MISC_DEVICES conditional,
+# because it may be selected by drivers/platform/x86/hp_accel.
+config SENSORS_LIS3LV02D
+	tristate
+	depends on INPUT
+	select INPUT_POLLDEV
+	default n
+
 menuconfig MISC_DEVICES
 	bool "Misc devices"
 	---help---
@@ -462,5 +470,6 @@ source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
 source "drivers/misc/iwmc3200top/Kconfig"
 source "drivers/misc/ti-st/Kconfig"
+source "drivers/misc/lis3lv02d/Kconfig"
 
 endif # MISC_DEVICES

drivers/misc/Makefile

@@ -42,3 +42,4 @@ obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
 obj-$(CONFIG_PCH_PHUB)		+= pch_phub.o
 obj-y				+= ti-st/
 obj-$(CONFIG_AB8500_PWM)	+= ab8500-pwm.o
+obj-y				+= lis3lv02d/

drivers/misc/lis3lv02d/Kconfig

+#
+# STMicroelectonics LIS3LV02D and similar accelerometers
+#
+
+config SENSORS_LIS3_SPI
+	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
+	depends on !ACPI && SPI_MASTER && INPUT
+	select SENSORS_LIS3LV02D
+	default n
+	help
+	  This driver provides support for the LIS3LV02Dx accelerometer connected
+	  via SPI. The accelerometer data is readable via
+	  /sys/devices/platform/lis3lv02d.
+
+	  This driver also provides an absolute input class device, allowing
+	  the laptop to act as a pinball machine-esque joystick.
+
+	  This driver can also be built as modules.  If so, the core module
+	  will be called lis3lv02d and a specific module for the SPI transport
+	  is called lis3lv02d_spi.
+
+config SENSORS_LIS3_I2C
+	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
+	depends on I2C && INPUT
+	select SENSORS_LIS3LV02D
+	default n
+	help
+	  This driver provides support for the LIS3LV02Dx accelerometer connected
+	  via I2C. The accelerometer data is readable via
+	  /sys/devices/platform/lis3lv02d.
+
+	  This driver also provides an absolute input class device, allowing
+	  the device to act as a pinball machine-esque joystick.
+
+	  This driver can also be built as modules.  If so, the core module
+	  will be called lis3lv02d and a specific module for the I2C transport
+	  is called lis3lv02d_i2c.

drivers/misc/lis3lv02d/Makefile

+#
+# STMicroelectonics LIS3LV02D and similar accelerometers
+#
+
+obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o
+obj-$(CONFIG_SENSORS_LIS3_SPI)	+= lis3lv02d_spi.o
+obj-$(CONFIG_SENSORS_LIS3_I2C)	+= lis3lv02d_i2c.o

drivers/hwmon/lis3lv02d.c → drivers/misc/lis3lv02d/lis3lv02d.c

@@ -38,7 +38,7 @@
 #include <linux/uaccess.h>
 #include <linux/miscdevice.h>
 #include <linux/pm_runtime.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
 #include "lis3lv02d.h"
 
 #define DRIVER_NAME     "lis3lv02d"
@@ -88,7 +88,6 @@
 struct lis3lv02d lis3_dev = {
 	.misc_wait   = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait),
 };
-
 EXPORT_SYMBOL_GPL(lis3_dev);
 
 /* just like param_set_int() but does sanity-check so that it won't point

drivers/platform/x86/hp_accel.c

@@ -37,7 +37,7 @@
 #include <linux/leds.h>
 #include <linux/atomic.h>
 #include <acpi/acpi_drivers.h>
-#include "../../hwmon/lis3lv02d.h"
+#include "../../misc/lis3lv02d/lis3lv02d.h"
 
 #define DRIVER_NAME     "lis3lv02d"
 #define ACPI_MDPS_CLASS "accelerometer"