ARM: shmobile: r8a7779: cleanup registration of usb phy

usb phy driver which needs platform data at the time of
registration is used from Marzen only.
Now, ARM/shmobile aims to support DT,
and the C code base board support will be removed
if DT support is completed.
Current driver registration method which needs platform data
and which is not shared complicates codes.
This means legacy C code cleanup after DT supporting
will be more complicated
This patch registers it on board code as cleanup C code
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

arch/arm/mach-shmobile/board-marzen.c

@@ -29,6 +29,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
@@ -56,7 +57,26 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
 };
 
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+	[0] = {
+		.start		= 0xffe70800,
+		.end		= 0xffe70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct rcar_phy_platform_data usb_phy_platform_data;
+
+static struct platform_device usb_phy = {
+	.name		= "rcar_usb_phy",
+	.id		= -1,
+	.dev  = {
+		.platform_data = &usb_phy_platform_data,
+	},
+	.resource	= usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(usb_phy_resources),
+};
 
 /* SMSC LAN89218 */
 static struct resource smsc911x_resources[] = {
@@ -183,6 +203,7 @@ static struct platform_device *marzen_devices[] __initdata = {
 	&thermal_device,
 	&hspi_device,
 	&leds_device,
+	&usb_phy,
 };
 
 static const struct pinctrl_map marzen_pinctrl_map[] = {
@@ -233,7 +254,6 @@ static void __init marzen_init(void)
 	r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
 
 	r8a7779_add_standard_devices();
-	r8a7779_add_usb_phy_device(&usb_phy_platform_data);
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
 

arch/arm/mach-shmobile/include/mach/r8a7779.h

@@ -4,7 +4,6 @@
 #include <linux/sh_clk.h>
 #include <linux/pm_domain.h>
 #include <linux/sh_eth.h>
-#include <linux/platform_data/usb-rcar-phy.h>
 
 struct platform_device;
 
@@ -34,7 +33,6 @@ extern void r8a7779_add_early_devices(void);
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_add_standard_devices_dt(void);
 extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
-extern void r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
 extern void r8a7779_init_late(void);
 extern void r8a7779_clock_init(void);
 extern void r8a7779_pinmux_init(void);

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -386,15 +386,6 @@ static struct platform_device sata_device = {
 	},
 };
 
-/* USB PHY */
-static struct resource usb_phy_resources[] __initdata = {
-	[0] = {
-		.start		= 0xffe70800,
-		.end		= 0xffe70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
 /* USB */
 static struct usb_phy *phy;
 
@@ -600,14 +591,6 @@ void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
 					  pdata, sizeof(*pdata));
 }
 
-void __init r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata)
-{
-	platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1,
-					  usb_phy_resources,
-					  ARRAY_SIZE(usb_phy_resources),
-					  pdata, sizeof(*pdata));
-}
-
 /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
 void __init __weak r8a7779_register_twd(void) { }