提交 fb27145d 编写于 作者: A Andrew Morton 提交者: Andi Kleen

[PATCH] i386: revert i386-fix-the-verify_quirk_intel_irqbalance

This is unneeded with Ingo's genapic rework.

Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
上级 bdd0dc52
......@@ -10,26 +10,6 @@
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev)
{
u8 config, rev;
u32 word;
/* BIOS may enable hardware IRQ balancing for
* E7520/E7320/E7525(revision ID 0x9 and below)
* based platforms.
* For those platforms, make sure that the genapic is set to 'flat'
*/
pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
if (rev > 0x9)
return;
/* enable access to config space*/
pci_read_config_byte(dev, 0xf4, &config);
pci_write_config_byte(dev, 0xf4, config|0x2);
/* read xTPR register */
raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
if (!(word & (1 << 13))) {
#ifdef CONFIG_X86_64
if (genapic != &apic_flat)
panic("APIC mode must be flat on this system\n");
......@@ -37,11 +17,6 @@ static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev)
if (genapic != &apic_default)
panic("APIC mode must be default(flat) on this system. Use apic=default\n");
#endif
}
/* put back the original value for config space*/
if (!(config & 0x2))
pci_write_config_byte(dev, 0xf4, config);
}
void __init quirk_intel_irqbalance(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册