perf vendor events intel: Update BroadwellDE events to V7

Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20180118234518.GA27753@tassilo.jf.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

tools/perf/pmu-events/arch/x86/broadwellde/floating-point.json

@@ -6,7 +6,7 @@
         "Counter": "0,1,2,3",
         "EventName": "OTHER_ASSISTS.AVX_TO_SSE",
         "Errata": "BDM30",
-        "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts the number of transitions from AVX-256 to legacy SSE when penalty is applicable.",
+        "PublicDescription": "This event counts the number of transitions from AVX-256 to legacy SSE when penalty is applicable.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -17,7 +17,7 @@
         "Counter": "0,1,2,3",
         "EventName": "OTHER_ASSISTS.SSE_TO_AVX",
         "Errata": "BDM30",
-        "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts the number of transitions from legacy SSE to AVX-256 when penalty is applicable.",
+        "PublicDescription": "This event counts the number of transitions from legacy SSE to AVX-256 when penalty is applicable.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -25,7 +25,6 @@
         "EventCode": "0xC7",
         "UMask": "0x1",
         "BriefDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired.  Each count represents 1 computation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
-        "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
         "SampleAfterValue": "2000003",
@@ -35,17 +34,24 @@
         "EventCode": "0xC7",
         "UMask": "0x2",
         "BriefDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired.  Each count represents 1 computation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
-        "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
+    {
+        "EventCode": "0xC7",
+        "UMask": "0x3",
+        "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+        "Counter": "0,1,2,3",
+        "EventName": "FP_ARITH_INST_RETIRED.SCALAR",
+        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3"
+    },
     {
         "EventCode": "0xC7",
         "UMask": "0x4",
         "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired.  Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
-        "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
         "SampleAfterValue": "2000003",
@@ -55,7 +61,6 @@
         "EventCode": "0xC7",
         "UMask": "0x8",
         "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired.  Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
-        "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
         "SampleAfterValue": "2000003",
@@ -65,19 +70,54 @@
         "EventCode": "0xC7",
         "UMask": "0x10",
         "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired.  Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
-        "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
+    {
+        "EventCode": "0xC7",
+        "UMask": "0x15",
+        "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.  ?.",
+        "Counter": "0,1,2,3",
+        "EventName": "FP_ARITH_INST_RETIRED.DOUBLE",
+        "SampleAfterValue": "2000006",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "EventCode": "0xc7",
+        "UMask": "0x20",
+        "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired.  Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+        "Counter": "0,1,2,3",
+        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
+        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "EventCode": "0xC7",
+        "UMask": "0x2a",
+        "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.",
+        "Counter": "0,1,2,3",
+        "EventName": "FP_ARITH_INST_RETIRED.SINGLE",
+        "SampleAfterValue": "2000005",
+        "CounterHTOff": "0,1,2,3"
+    },
+    {
+        "EventCode": "0xC7",
+        "UMask": "0x3c",
+        "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+        "Counter": "0,1,2,3",
+        "EventName": "FP_ARITH_INST_RETIRED.PACKED",
+        "SampleAfterValue": "2000004",
+        "CounterHTOff": "0,1,2,3"
+    },
     {
         "EventCode": "0xCA",
         "UMask": "0x2",
         "BriefDescription": "Number of X87 assists due to output value.",
         "Counter": "0,1,2,3",
         "EventName": "FP_ASSIST.X87_OUTPUT",
-        "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts the number of x87 floating point (FP) micro-code assist (numeric overflow/underflow, inexact result) when the output value (destination register) is invalid.",
+        "PublicDescription": "This event counts the number of x87 floating point (FP) micro-code assist (numeric overflow/underflow, inexact result) when the output value (destination register) is invalid.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -87,7 +127,7 @@
         "BriefDescription": "Number of X87 assists due to input value.",
         "Counter": "0,1,2,3",
         "EventName": "FP_ASSIST.X87_INPUT",
-        "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts x87 floating point (FP) micro-code assist (invalid operation, denormal operand, SNaN operand) when the input value (one of the source operands to an FP instruction) is invalid.",
+        "PublicDescription": "This event counts x87 floating point (FP) micro-code assist (invalid operation, denormal operand, SNaN operand) when the input value (one of the source operands to an FP instruction) is invalid.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -97,7 +137,7 @@
         "BriefDescription": "Number of SIMD FP assists due to Output values",
         "Counter": "0,1,2,3",
         "EventName": "FP_ASSIST.SIMD_OUTPUT",
-        "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts the number of SSE* floating point (FP) micro-code assist (numeric overflow/underflow) when the output value (destination register) is invalid. Counting covers only cases involving penalties that require micro-code assist intervention.",
+        "PublicDescription": "This event counts the number of SSE* floating point (FP) micro-code assist (numeric overflow/underflow) when the output value (destination register) is invalid. Counting covers only cases involving penalties that require micro-code assist intervention.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -107,7 +147,7 @@
         "BriefDescription": "Number of SIMD FP assists due to input values",
         "Counter": "0,1,2,3",
         "EventName": "FP_ASSIST.SIMD_INPUT",
-        "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts any input SSE* FP assist - invalid operation, denormal operand, dividing by zero, SNaN operand. Counting includes only cases involving penalties that required micro-code assist intervention.",
+        "PublicDescription": "This event counts any input SSE* FP assist - invalid operation, denormal operand, dividing by zero, SNaN operand. Counting includes only cases involving penalties that required micro-code assist intervention.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -121,51 +161,5 @@
         "PublicDescription": "This event counts cycles with any input and output SSE or x87 FP assist. If an input and output assist are detected on the same cycle the event increments by 1.",
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "EventCode": "0xc7",
-        "UMask": "0x20",
-        "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired.  Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
-        "PEBS": "1",
-        "Counter": "0,1,2,3",
-        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
-        "SampleAfterValue": "2000003",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "EventCode": "0xC7",
-        "UMask": "0x3",
-        "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
-        "Counter": "0,1,2,3",
-        "EventName": "FP_ARITH_INST_RETIRED.SCALAR",
-        "SampleAfterValue": "2000003",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "EventCode": "0xC7",
-        "UMask": "0x3c",
-        "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
-        "Counter": "0,1,2,3",
-        "EventName": "FP_ARITH_INST_RETIRED.PACKED",
-        "SampleAfterValue": "2000004",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "EventCode": "0xC7",
-        "UMask": "0x2a",
-        "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.",
-        "Counter": "0,1,2,3",
-        "EventName": "FP_ARITH_INST_RETIRED.SINGLE",
-        "SampleAfterValue": "2000005",
-        "CounterHTOff": "0,1,2,3"
-    },
-    {
-        "EventCode": "0xC7",
-        "UMask": "0x15",
-        "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.  ?.",
-        "Counter": "0,1,2,3",
-        "EventName": "FP_ARITH_INST_RETIRED.DOUBLE",
-        "SampleAfterValue": "2000006",
-        "CounterHTOff": "0,1,2,3"
     }
 ]
\ No newline at end of file

tools/perf/pmu-events/arch/x86/broadwellde/frontend.json

@@ -15,80 +15,49 @@
         "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
         "Counter": "0,1,2,3",
         "EventName": "IDQ.MITE_UOPS",
-        "PublicDescription": "This event counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may \"bypass\" the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "PublicDescription": "This event counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may bypass the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x79",
-        "UMask": "0x8",
-        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
-        "Counter": "0,1,2,3",
-        "EventName": "IDQ.DSB_UOPS",
-        "PublicDescription": "This event counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may \"bypass\" the IDQ.",
-        "SampleAfterValue": "2000003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x79",
-        "UMask": "0x10",
-        "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
-        "Counter": "0,1,2,3",
-        "EventName": "IDQ.MS_DSB_UOPS",
-        "PublicDescription": "This event counts the number of uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may \"bypass\" the IDQ.",
-        "SampleAfterValue": "2000003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x79",
-        "UMask": "0x20",
-        "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
-        "Counter": "0,1,2,3",
-        "EventName": "IDQ.MS_MITE_UOPS",
-        "PublicDescription": "This event counts the number of uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while the Microcode Sequenser (MS) is busy. Counting includes uops that may \"bypass\" the IDQ.",
-        "SampleAfterValue": "2000003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x79",
-        "UMask": "0x30",
-        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "UMask": "0x4",
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path",
         "Counter": "0,1,2,3",
-        "EventName": "IDQ.MS_UOPS",
-        "PublicDescription": "This event counts the total number of uops delivered to Instruction Decode Queue (IDQ) while the Microcode Sequenser (MS) is busy. Counting includes uops that may \"bypass\" the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
+        "EventName": "IDQ.MITE_CYCLES",
+        "CounterMask": "1",
+        "PublicDescription": "This event counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may bypass the IDQ.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x79",
-        "UMask": "0x30",
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "UMask": "0x8",
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
         "Counter": "0,1,2,3",
-        "EventName": "IDQ.MS_CYCLES",
-        "CounterMask": "1",
-        "PublicDescription": "This event counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequenser (MS) is busy. Counting includes uops that may \"bypass\" the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
+        "EventName": "IDQ.DSB_UOPS",
+        "PublicDescription": "This event counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may bypass the IDQ.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x79",
-        "UMask": "0x4",
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path",
+        "UMask": "0x8",
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path",
         "Counter": "0,1,2,3",
-        "EventName": "IDQ.MITE_CYCLES",
+        "EventName": "IDQ.DSB_CYCLES",
         "CounterMask": "1",
-        "PublicDescription": "This event counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may \"bypass\" the IDQ.",
+        "PublicDescription": "This event counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may bypass the IDQ.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
     {
         "EventCode": "0x79",
-        "UMask": "0x8",
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path",
+        "UMask": "0x10",
+        "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
         "Counter": "0,1,2,3",
-        "EventName": "IDQ.DSB_CYCLES",
-        "CounterMask": "1",
-        "PublicDescription": "This event counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may \"bypass\" the IDQ.",
+        "EventName": "IDQ.MS_DSB_UOPS",
+        "PublicDescription": "This event counts the number of uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may bypass the IDQ.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -99,7 +68,7 @@
         "Counter": "0,1,2,3",
         "EventName": "IDQ.MS_DSB_CYCLES",
         "CounterMask": "1",
-        "PublicDescription": "This event counts cycles during which uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may \"bypass\" the IDQ.",
+        "PublicDescription": "This event counts cycles during which uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may bypass the IDQ.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -111,7 +80,7 @@
         "Counter": "0,1,2,3",
         "EventName": "IDQ.MS_DSB_OCCUR",
         "CounterMask": "1",
-        "PublicDescription": "This event counts the number of deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while the Microcode Sequencer (MS) is busy. Counting includes uops that may \"bypass\" the IDQ.",
+        "PublicDescription": "This event counts the number of deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while the Microcode Sequencer (MS) is busy. Counting includes uops that may bypass the IDQ.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -122,7 +91,7 @@
         "Counter": "0,1,2,3",
         "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS",
         "CounterMask": "4",
-        "PublicDescription": "This event counts the number of cycles 4  uops were  delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may \"bypass\" the IDQ.",
+        "PublicDescription": "This event counts the number of cycles 4  uops were  delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may bypass the IDQ.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -133,7 +102,17 @@
         "Counter": "0,1,2,3",
         "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS",
         "CounterMask": "1",
-        "PublicDescription": "This event counts the number of cycles  uops were  delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may \"bypass\" the IDQ.",
+        "PublicDescription": "This event counts the number of cycles  uops were  delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may bypass the IDQ.",
+        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EventCode": "0x79",
+        "UMask": "0x20",
+        "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "Counter": "0,1,2,3",
+        "EventName": "IDQ.MS_MITE_UOPS",
+        "PublicDescription": "This event counts the number of uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while the Microcode Sequenser (MS) is busy. Counting includes uops that may bypass the IDQ.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -144,7 +123,7 @@
         "Counter": "0,1,2,3",
         "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS",
         "CounterMask": "4",
-        "PublicDescription": "This event counts the number of cycles 4  uops were  delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may \"bypass\" the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "PublicDescription": "This event counts the number of cycles 4  uops were  delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may bypass the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -155,7 +134,39 @@
         "Counter": "0,1,2,3",
         "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS",
         "CounterMask": "1",
-        "PublicDescription": "This event counts the number of cycles  uops were delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may \"bypass\" the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "PublicDescription": "This event counts the number of cycles  uops were delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may bypass the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EventCode": "0x79",
+        "UMask": "0x30",
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "Counter": "0,1,2,3",
+        "EventName": "IDQ.MS_UOPS",
+        "PublicDescription": "This event counts the total number of uops delivered to Instruction Decode Queue (IDQ) while the Microcode Sequenser (MS) is busy. Counting includes uops that may bypass the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
+        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EventCode": "0x79",
+        "UMask": "0x30",
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "Counter": "0,1,2,3",
+        "EventName": "IDQ.MS_CYCLES",
+        "CounterMask": "1",
+        "PublicDescription": "This event counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequenser (MS) is busy. Counting includes uops that may bypass the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
+        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
+    {
+        "EdgeDetect": "1",
+        "EventCode": "0x79",
+        "UMask": "0x30",
+        "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.",
+        "Counter": "0,1,2,3",
+        "EventName": "IDQ.MS_SWITCHES",
+        "CounterMask": "1",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -165,7 +176,7 @@
         "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
         "Counter": "0,1,2,3",
         "EventName": "IDQ.MITE_ALL_UOPS",
-        "PublicDescription": "This event counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may \"bypass\" the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "PublicDescription": "This event counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may bypass the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -205,7 +216,7 @@
         "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled",
         "Counter": "0,1,2,3",
         "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
-        "PublicDescription": "This event counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding ?4 ? x? when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when:\n a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread;\n b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions); \n c. Instruction Decode Queue (IDQ) delivers four uops.",
+        "PublicDescription": "This event counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4  x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when:\n a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread;\n b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions); \n c. Instruction Decode Queue (IDQ) delivers four uops.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
@@ -268,18 +279,7 @@
         "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.",
         "Counter": "0,1,2,3",
         "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
-        "PublicDescription": "This event counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. \nMM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.\nPenalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 0?2 cycles.",
-        "SampleAfterValue": "2000003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EdgeDetect": "1",
-        "EventCode": "0x79",
-        "UMask": "0x30",
-        "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.",
-        "Counter": "0,1,2,3",
-        "EventName": "IDQ.MS_SWITCHES",
-        "CounterMask": "1",
+        "PublicDescription": "This event counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. \nMM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.\nPenalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     }

tools/perf/pmu-events/arch/x86/broadwellde/memory.json

@@ -95,7 +95,6 @@
         "BriefDescription": "Counts the number of times a class of instructions that may cause a transactional abort was executed. Since this is the count of execution, it may not always cause a transactional abort.",
         "Counter": "0,1,2,3",
         "EventName": "TX_EXEC.MISC1",
-        "PublicDescription": "Unfriendly TSX abort triggered by  a flowmarker.",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -171,11 +170,11 @@
     {
         "EventCode": "0xc8",
         "UMask": "0x4",
-        "BriefDescription": "Number of times HLE abort was triggered",
+        "BriefDescription": "Number of times HLE abort was triggered (PEBS)",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "HLE_RETIRED.ABORTED",
-        "PublicDescription": "Number of times HLE abort was triggered.",
+        "PublicDescription": "Number of times HLE abort was triggered (PEBS).",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
@@ -252,11 +251,11 @@
     {
         "EventCode": "0xc9",
         "UMask": "0x4",
-        "BriefDescription": "Number of times RTM abort was triggered",
+        "BriefDescription": "Number of times RTM abort was triggered (PEBS)",
         "PEBS": "1",
         "Counter": "0,1,2,3",
         "EventName": "RTM_RETIRED.ABORTED",
-        "PublicDescription": "Number of times RTM abort was triggered .",
+        "PublicDescription": "Number of times RTM abort was triggered (PEBS).",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },

tools/perf/pmu-events/arch/x86/broadwellde/other.json

@@ -9,16 +9,6 @@
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
-    {
-        "EventCode": "0x5C",
-        "UMask": "0x2",
-        "BriefDescription": "Unhalted core cycles when thread is in rings 1, 2, or 3",
-        "Counter": "0,1,2,3",
-        "EventName": "CPL_CYCLES.RING123",
-        "PublicDescription": "This event counts unhalted core cycles during which the thread is in rings 1, 2, or 3.",
-        "SampleAfterValue": "2000003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
     {
         "EdgeDetect": "1",
         "EventCode": "0x5C",
@@ -31,6 +21,16 @@
         "SampleAfterValue": "100007",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x5C",
+        "UMask": "0x2",
+        "BriefDescription": "Unhalted core cycles when thread is in rings 1, 2, or 3",
+        "Counter": "0,1,2,3",
+        "EventName": "CPL_CYCLES.RING123",
+        "PublicDescription": "This event counts unhalted core cycles during which the thread is in rings 1, 2, or 3.",
+        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0x63",
         "UMask": "0x1",

tools/perf/pmu-events/arch/x86/broadwellde/virtual-memory.json

@@ -43,6 +43,16 @@
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x08",
+        "UMask": "0xe",
+        "BriefDescription": "Demand load Miss in all translation lookaside buffer (TLB) levels causes a page walk that completes of any page size.",
+        "Counter": "0,1,2,3",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
+        "Errata": "BDM69",
+        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0x08",
         "UMask": "0x10",
@@ -72,6 +82,15 @@
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x08",
+        "UMask": "0x60",
+        "BriefDescription": "Load operations that miss the first DTLB level but hit the second and do not cause page walks.",
+        "Counter": "0,1,2,3",
+        "EventName": "DTLB_LOAD_MISSES.STLB_HIT",
+        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0x49",
         "UMask": "0x1",
@@ -116,6 +135,16 @@
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x49",
+        "UMask": "0xe",
+        "BriefDescription": "Store misses in all DTLB levels that cause completed page walks.",
+        "Counter": "0,1,2,3",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED",
+        "Errata": "BDM69",
+        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0x49",
         "UMask": "0x10",
@@ -145,6 +174,15 @@
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x49",
+        "UMask": "0x60",
+        "BriefDescription": "Store operations that miss the first TLB level but hit the second and do not cause page walks.",
+        "Counter": "0,1,2,3",
+        "EventName": "DTLB_STORE_MISSES.STLB_HIT",
+        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0x4F",
         "UMask": "0x10",
@@ -199,6 +237,16 @@
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x85",
+        "UMask": "0xe",
+        "BriefDescription": "Misses in all ITLB levels that cause completed page walks.",
+        "Counter": "0,1,2,3",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED",
+        "Errata": "BDM69",
+        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0x85",
         "UMask": "0x10",
@@ -228,6 +276,15 @@
         "SampleAfterValue": "100003",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
     },
+    {
+        "EventCode": "0x85",
+        "UMask": "0x60",
+        "BriefDescription": "Operations that miss the first ITLB level but hit the second and do not cause any page walks.",
+        "Counter": "0,1,2,3",
+        "EventName": "ITLB_MISSES.STLB_HIT",
+        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7"
+    },
     {
         "EventCode": "0xAE",
         "UMask": "0x1",
@@ -250,60 +307,60 @@
     },
     {
         "EventCode": "0xBC",
-        "UMask": "0x21",
-        "BriefDescription": "Number of ITLB page walker hits in the L1+FB.",
+        "UMask": "0x12",
+        "BriefDescription": "Number of DTLB page walker hits in the L2.",
         "Counter": "0,1,2,3",
-        "EventName": "PAGE_WALKER_LOADS.ITLB_L1",
+        "EventName": "PAGE_WALKER_LOADS.DTLB_L2",
         "Errata": "BDM69, BDM98",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xBC",
-        "UMask": "0x12",
-        "BriefDescription": "Number of DTLB page walker hits in the L2.",
+        "UMask": "0x14",
+        "BriefDescription": "Number of DTLB page walker hits in the L3 + XSNP.",
         "Counter": "0,1,2,3",
-        "EventName": "PAGE_WALKER_LOADS.DTLB_L2",
+        "EventName": "PAGE_WALKER_LOADS.DTLB_L3",
         "Errata": "BDM69, BDM98",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xBC",
-        "UMask": "0x22",
-        "BriefDescription": "Number of ITLB page walker hits in the L2.",
+        "UMask": "0x18",
+        "BriefDescription": "Number of DTLB page walker hits in Memory.",
         "Counter": "0,1,2,3",
-        "EventName": "PAGE_WALKER_LOADS.ITLB_L2",
+        "EventName": "PAGE_WALKER_LOADS.DTLB_MEMORY",
         "Errata": "BDM69, BDM98",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xBC",
-        "UMask": "0x14",
-        "BriefDescription": "Number of DTLB page walker hits in the L3 + XSNP.",
+        "UMask": "0x21",
+        "BriefDescription": "Number of ITLB page walker hits in the L1+FB.",
         "Counter": "0,1,2,3",
-        "EventName": "PAGE_WALKER_LOADS.DTLB_L3",
+        "EventName": "PAGE_WALKER_LOADS.ITLB_L1",
         "Errata": "BDM69, BDM98",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xBC",
-        "UMask": "0x24",
-        "BriefDescription": "Number of ITLB page walker hits in the L3 + XSNP.",
+        "UMask": "0x22",
+        "BriefDescription": "Number of ITLB page walker hits in the L2.",
         "Counter": "0,1,2,3",
-        "EventName": "PAGE_WALKER_LOADS.ITLB_L3",
+        "EventName": "PAGE_WALKER_LOADS.ITLB_L2",
         "Errata": "BDM69, BDM98",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
     },
     {
         "EventCode": "0xBC",
-        "UMask": "0x18",
-        "BriefDescription": "Number of DTLB page walker hits in Memory.",
+        "UMask": "0x24",
+        "BriefDescription": "Number of ITLB page walker hits in the L3 + XSNP.",
         "Counter": "0,1,2,3",
-        "EventName": "PAGE_WALKER_LOADS.DTLB_MEMORY",
+        "EventName": "PAGE_WALKER_LOADS.ITLB_L3",
         "Errata": "BDM69, BDM98",
         "SampleAfterValue": "2000003",
         "CounterHTOff": "0,1,2,3"
@@ -327,62 +384,5 @@
         "PublicDescription": "This event counts the number of any STLB flush attempts (such as entire, VPID, PCID, InvPage, CR3 write, and so on).",
         "SampleAfterValue": "100007",
         "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x08",
-        "UMask": "0xe",
-        "BriefDescription": "Demand load Miss in all translation lookaside buffer (TLB) levels causes a page walk that completes of any page size.",
-        "Counter": "0,1,2,3",
-        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
-        "Errata": "BDM69",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x08",
-        "UMask": "0x60",
-        "BriefDescription": "Load operations that miss the first DTLB level but hit the second and do not cause page walks.",
-        "Counter": "0,1,2,3",
-        "EventName": "DTLB_LOAD_MISSES.STLB_HIT",
-        "SampleAfterValue": "2000003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x49",
-        "UMask": "0xe",
-        "BriefDescription": "Store misses in all DTLB levels that cause completed page walks.",
-        "Counter": "0,1,2,3",
-        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED",
-        "Errata": "BDM69",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x49",
-        "UMask": "0x60",
-        "BriefDescription": "Store operations that miss the first TLB level but hit the second and do not cause page walks.",
-        "Counter": "0,1,2,3",
-        "EventName": "DTLB_STORE_MISSES.STLB_HIT",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x85",
-        "UMask": "0xe",
-        "BriefDescription": "Misses in all ITLB levels that cause completed page walks.",
-        "Counter": "0,1,2,3",
-        "EventName": "ITLB_MISSES.WALK_COMPLETED",
-        "Errata": "BDM69",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
-    },
-    {
-        "EventCode": "0x85",
-        "UMask": "0x60",
-        "BriefDescription": "Operations that miss the first ITLB level but hit the second and do not cause any page walks.",
-        "Counter": "0,1,2,3",
-        "EventName": "ITLB_MISSES.STLB_HIT",
-        "SampleAfterValue": "100003",
-        "CounterHTOff": "0,1,2,3,4,5,6,7"
     }
 ]
\ No newline at end of file