提交 f77bf014 编写于 作者: S Sam Ravnborg

kbuild: introduce ccflags-y, asflags-y and ldflags-y

Introduce ccflags-y, asflags-y and ldflags-y so we soon can
deprecate use of EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS.
This patch does not touch any in-tree users - thats next round.
Lets get this committed first and then fix the users of the
soon to be deprecated variants next.

The rationale behind this change is to introduce support for
makefile fragments like:

ccflags-$(CONFIG_WHATEVER_DEBUG) := -DDEBUG

As a replacement for the uglier:
ifeq ($(CONFIG_WHATEVER_DEBUG),y)
        EXTRA_CFLAGS := -DDEBUG
endif
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
上级 06c5040c
...@@ -276,40 +276,39 @@ more details, with real examples. ...@@ -276,40 +276,39 @@ more details, with real examples.
--- 3.7 Compilation flags --- 3.7 Compilation flags
EXTRA_CFLAGS, EXTRA_AFLAGS, EXTRA_LDFLAGS ccflags-y, asflags-y and ldflags-y
The three flags listed above applies only to the kbuild makefile
where they are assigned. They are used for all the normal
cc, as and ld invocation happenign during a recursive build.
Note: Flags with the same behaviour were previously named:
EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS.
They are yet supported but their use are deprecated.
All the EXTRA_ variables apply only to the kbuild makefile ccflags-y specifies options for compiling C files with $(CC).
where they are assigned. The EXTRA_ variables apply to all
commands executed in the kbuild makefile.
$(EXTRA_CFLAGS) specifies options for compiling C files with
$(CC).
Example: Example:
# drivers/sound/emu10k1/Makefile # drivers/sound/emu10k1/Makefile
EXTRA_CFLAGS += -I$(obj) ccflags-y += -I$(obj)
ifdef DEBUG ccflags-$(DEBUG) += -DEMU10K1_DEBUG
EXTRA_CFLAGS += -DEMU10K1_DEBUG
endif
This variable is necessary because the top Makefile owns the This variable is necessary because the top Makefile owns the
variable $(KBUILD_CFLAGS) and uses it for compilation flags for the variable $(KBUILD_CFLAGS) and uses it for compilation flags for the
entire tree. entire tree.
$(EXTRA_AFLAGS) is a similar string for per-directory options asflags-y is a similar string for per-directory options
when compiling assembly language source. when compiling assembly language source.
Example: Example:
#arch/x86_64/kernel/Makefile #arch/x86_64/kernel/Makefile
EXTRA_AFLAGS := -traditional asflags-y := -traditional
$(EXTRA_LDFLAGS) is a string for per-directory options to $(LD). ldflags-y is a string for per-directory options to $(LD).
Example: Example:
#arch/m68k/fpsp040/Makefile #arch/m68k/fpsp040/Makefile
EXTRA_LDFLAGS := -x ldflags-y := -x
CFLAGS_$@, AFLAGS_$@ CFLAGS_$@, AFLAGS_$@
...@@ -495,9 +494,9 @@ more details, with real examples. ...@@ -495,9 +494,9 @@ more details, with real examples.
Example: Example:
#fs/reiserfs/Makefile #fs/reiserfs/Makefile
EXTRA_CFLAGS := $(call cc-ifversion, -lt, 0402, -O1) ccflags-y := $(call cc-ifversion, -lt, 0402, -O1)
In this example, EXTRA_CFLAGS will be assigned the value -O1 if the In this example, ccflags-y will be assigned the value -O1 if the
$(CC) version is less than 4.2. $(CC) version is less than 4.2.
cc-ifversion takes all the shell operators: cc-ifversion takes all the shell operators:
-eq, -ne, -lt, -le, -gt, and -ge -eq, -ne, -lt, -le, -gt, and -ge
...@@ -783,7 +782,7 @@ When kbuild executes, the following steps are followed (roughly): ...@@ -783,7 +782,7 @@ When kbuild executes, the following steps are followed (roughly):
Example: Example:
#arch/s390/Makefile #arch/s390/Makefile
LDFLAGS := -m elf_s390 LDFLAGS := -m elf_s390
Note: EXTRA_LDFLAGS can be used to further customise Note: ldflags-y can be used to further customise
the flags used. See chapter 3.7. the flags used. See chapter 3.7.
LDFLAGS_MODULE Options for $(LD) when linking modules LDFLAGS_MODULE Options for $(LD) when linking modules
...@@ -1100,7 +1099,7 @@ When kbuild executes, the following steps are followed (roughly): ...@@ -1100,7 +1099,7 @@ When kbuild executes, the following steps are followed (roughly):
When building the *.lds target, kbuild uses the variables: When building the *.lds target, kbuild uses the variables:
KBUILD_CPPFLAGS : Set in top-level Makefile KBUILD_CPPFLAGS : Set in top-level Makefile
EXTRA_CPPFLAGS : May be set in the kbuild makefile cppflags-y : May be set in the kbuild makefile
CPPFLAGS_$(@F) : Target specific flags. CPPFLAGS_$(@F) : Target specific flags.
Note that the full filename is used in this Note that the full filename is used in this
assignment. assignment.
......
...@@ -22,6 +22,10 @@ EXTRA_AFLAGS := ...@@ -22,6 +22,10 @@ EXTRA_AFLAGS :=
EXTRA_CFLAGS := EXTRA_CFLAGS :=
EXTRA_CPPFLAGS := EXTRA_CPPFLAGS :=
EXTRA_LDFLAGS := EXTRA_LDFLAGS :=
asflags-y :=
ccflags-y :=
cppflags-y :=
ldflags-y :=
# Read .config if it exist, otherwise ignore # Read .config if it exist, otherwise ignore
-include include/config/auto.conf -include include/config/auto.conf
......
# Backward compatibility
asflags-y += $(EXTRA_AFLAGS)
ccflags-y += $(EXTRA_CFLAGS)
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y += $(EXTRA_LDFLAGS)
# Figure out what we need to build from the various variables # Figure out what we need to build from the various variables
# =========================================================================== # ===========================================================================
...@@ -84,9 +90,9 @@ basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" ...@@ -84,9 +90,9 @@ basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
modname_flags = $(if $(filter 1,$(words $(modname))),\ modname_flags = $(if $(filter 1,$(words $(modname))),\
-D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
_c_flags = $(KBUILD_CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$(basetarget).o) _c_flags = $(KBUILD_CFLAGS) $(ccflags-y) $(CFLAGS_$(basetarget).o)
_a_flags = $(KBUILD_AFLAGS) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o) _a_flags = $(KBUILD_AFLAGS) $(asflags-y) $(AFLAGS_$(basetarget).o)
_cpp_flags = $(KBUILD_CPPFLAGS) $(EXTRA_CPPFLAGS) $(CPPFLAGS_$(@F)) _cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
# If building the kernel in a separate objtree expand all occurrences # If building the kernel in a separate objtree expand all occurrences
# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/'). # of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
...@@ -115,7 +121,7 @@ a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(KBUILD_CPPFLAGS) \ ...@@ -115,7 +121,7 @@ a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(KBUILD_CPPFLAGS) \
cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(__cpp_flags) cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(__cpp_flags)
ld_flags = $(LDFLAGS) $(EXTRA_LDFLAGS) ld_flags = $(LDFLAGS) $(ldflags-y)
# Finds the multi-part object the current object will be linked into # Finds the multi-part object the current object will be linked into
modname-multi = $(sort $(foreach m,$(multi-used),\ modname-multi = $(sort $(foreach m,$(multi-used),\
...@@ -145,7 +151,7 @@ $(obj)/%:: $(src)/%_shipped ...@@ -145,7 +151,7 @@ $(obj)/%:: $(src)/%_shipped
# --------------------------------------------------------------------------- # ---------------------------------------------------------------------------
quiet_cmd_ld = LD $@ quiet_cmd_ld = LD $@
cmd_ld = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) \ cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
$(filter-out FORCE,$^) -o $@ $(filter-out FORCE,$^) -o $@
# Objcopy # Objcopy
......
...@@ -3,8 +3,8 @@ ...@@ -3,8 +3,8 @@
# with correct relocations from System.map # with correct relocations from System.map
# Requires the following lines in makefile: # Requires the following lines in makefile:
#%.lst: %.c #%.lst: %.c
# $(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$@) -g -c -o $*.o $< # $(CC) $(c_flags) -g -c -o $*.o $< &&
# $(srctree)/scripts/makelst $*.o $(objtree)/System.map $(OBJDUMP) # $(srctree)/scripts/makelst $*.o System.map $(OBJDUMP) > $@
# #
# Copyright (C) 2000 IBM Corporation # Copyright (C) 2000 IBM Corporation
# Author(s): DJ Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) # Author(s): DJ Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册