Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-devfreq'

* pm-cpufreq:
  cpufreq: conservative: Allow down_threshold to take values from 1 to 10
  Revert "cpufreq: schedutil: Reduce frequencies slower"

* pm-cpuidle:
  cpuidle: dt: Add missing 'of_node_put()'

* pm-devfreq:
  PM / devfreq: exynos-ppmu: Staticize event list
  PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable
  PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable

.gitignore

@@ -33,6 +33,7 @@
 *.lzo
 *.patch
 *.gcno
+*.ll
 modules.builtin
 Module.symvers
 *.dwo

.mailmap

@@ -99,6 +99,8 @@ Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
 Mark Brown <broonie@sirena.org.uk>
+Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
+Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Matthieu CASTET <castet.matthieu@free.fr>
 Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@brturbo.com.br>
 Mauro Carvalho Chehab <mchehab@kernel.org> <maurochehab@gmail.com>
@@ -109,6 +111,7 @@ Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@osg.samsung.com>
 Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@s-opensource.com>
 Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.com>
 Matt Ranostay <mranostay@gmail.com> <matt.ranostay@intel.com>
+Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>
 Mayuresh Janorkar <mayur@ti.com>
 Michael Buesch <m@bues.ch>
 Michel Dänzer <michel@tungstengraphics.com>
@@ -143,6 +146,8 @@ Santosh Shilimkar <ssantosh@kernel.org>
 Santosh Shilimkar <santosh.shilimkar@oracle.org>
 Sascha Hauer <s.hauer@pengutronix.de>
 S.Çağlar Onur <caglar@pardus.org.tr>
+Sebastian Reichel <sre@kernel.org> <sre@debian.org>
+Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
 Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
 Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
 Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>

CREDITS

@@ -1034,6 +1034,10 @@ S: 2037 Walnut #6
 S: Boulder, Colorado 80302
 S: USA
 
+N: Hans-Christian Noren Egtvedt
+E: egtvedt@samfundet.no
+D: AVR32 architecture maintainer.
+
 N: Heiko Eißfeldt
 E: heiko@colossus.escape.de heiko@unifix.de
 D: verify_area stuff, generic SCSI fixes
@@ -3398,6 +3402,10 @@ S: Suite 101
 S: Markham, Ontario L3R 2Z6
 S: Canada
 
+N: Haavard Skinnemoen
+M: Haavard Skinnemoen <hskinnemoen@gmail.com>
+D: AVR32 architecture port to Linux and maintainer.
+
 N: Rick Sladkey
 E: jrs@world.std.com
 D: utility hacker: Emacs, NFS server, mount, kmem-ps, UPS debugger, strace, GDB

Documentation/00-INDEX

@@ -412,6 +412,8 @@ sysctl/
 	- directory with info on the /proc/sys/* files.
 target/
 	- directory with info on generating TCM v4 fabric .ko modules
+tee.txt
+	- info on the TEE subsystem and drivers
 this_cpu_ops.txt
 	- List rationale behind and the way to use this_cpu operations.
 thermal/

Documentation/ABI/obsolete/sysfs-firmware-acpi

+What:		/sys/firmware/acpi/hotplug/force_remove
+Date:		Mar 2017
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		Since the force_remove is inherently broken and dangerous to
+		use for some hotplugable resources like memory (because ignoring
+		the offline failure might lead to memory corruption and crashes)
+		enabling this knob is not safe and thus unsupported.

Documentation/ABI/stable/sysfs-bus-usb

@@ -9,7 +9,7 @@ Description:
 		hubs this facility is always enabled and their device
 		directories will not contain this file.
 
-		For more information, see Documentation/usb/persist.txt.
+		For more information, see Documentation/driver-api/usb/persist.rst.
 
 What:		/sys/bus/usb/devices/.../power/autosuspend
 Date:		March 2007

Documentation/ABI/stable/vdso

@@ -16,7 +16,8 @@ The vDSO uses symbol versioning; whenever you request a symbol from the
 vDSO, specify the version you are expecting.
 
 Programs that dynamically link to glibc will use the vDSO automatically.
-Otherwise, you can use the reference parser in Documentation/vDSO/parse_vdso.c.
+Otherwise, you can use the reference parser in
+tools/testing/selftests/vDSO/parse_vdso.c.
 
 Unless otherwise noted, the set of symbols with any given version and the
 ABI of those symbols is considered stable.  It may vary across architectures,

Documentation/ABI/testing/sysfs-block

@@ -213,14 +213,8 @@ What:		/sys/block/<disk>/queue/discard_zeroes_data
 Date:		May 2011
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		Devices that support discard functionality may return
-		stale or random data when a previously discarded block
-		is read back. This can cause problems if the filesystem
-		expects discarded blocks to be explicitly cleared. If a
-		device reports that it deterministically returns zeroes
-		when a discarded area is read the discard_zeroes_data
-		parameter will be set to one. Otherwise it will be 0 and
-		the result of reading a discarded area is undefined.
+		Will always return 0.  Don't rely on any specific behavior
+		for discards, and don't read this file.
 
 What:		/sys/block/<disk>/queue/write_same_max_bytes
 Date:		January 2012

Documentation/ABI/testing/sysfs-bus-iio

@@ -55,6 +55,7 @@ Description:
 		then it is to be found in the base device directory.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
 What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
 KernelVersion:	2.6.35
@@ -1593,7 +1594,7 @@ Description:
 		can be processed to siemens per meter.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_raw
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw counter device counts from channel Y. For quadrature
@@ -1601,10 +1602,24 @@ Description:
 		the counts of a single quadrature signal phase from channel Y.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_raw
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw counter device index value from channel Y. This attribute
 		provides an absolute positional reference (e.g. a pulse once per
 		revolution) which may be used to home positional systems as
 		required.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A list of possible counting directions which are:
+		- "up"	: counter device is increasing.
+		- "down": counter device is decreasing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw counter device counters direction for channel Y.

Documentation/ABI/testing/sysfs-bus-iio-adc-max9611

+What:		/sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description: 	The value of the shunt resistor used to compute power drain on
+                common input voltage pin (RS+). In Ohms.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description: 	The value of the shunt resistor used to compute current flowing
+                between RS+ and RS- voltage sense inputs. In Ohms.
+
+These attributes describe a single physical component, exposed as two distinct
+attributes as it is used to calculate two different values: power load and
+current flowing between RS+ and RS- inputs.

Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8

-What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Discrete set of available values for the respective counter
 		configuration are listed in this file.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
-KernelVersion:	4.9
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read-only attribute that indicates whether the counter for
-		channel Y is counting up or down.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Count mode for channel Y. Four count modes are available:
@@ -52,7 +44,7 @@ Description:
 			continuously throughout.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Read-only attribute that indicates whether excessive noise is
@@ -60,14 +52,14 @@ Description:
 		irrelevant in non-quadrature clock mode.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_preset
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		If the counter device supports preset registers, the preset
 		count for channel Y is provided by this attribute.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Configure channel Y counter for non-quadrature or quadrature
@@ -88,7 +80,7 @@ Description:
 			decoded for UP/DN clock.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Whether to set channel Y counter with channel Y preset value
@@ -96,14 +88,14 @@ Description:
 		Valid attribute values are boolean.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Active level of channel Y index input; irrelevant in
 		non-synchronous load mode.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Configure channel Y counter for non-synchronous or synchronous

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

@@ -3,11 +3,15 @@ KernelVersion:	4.11
 Contact:	benjamin.gaignard@st.com
 Description:
 		Reading returns the list possible master modes which are:
-		- "reset"     :	The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
-		- "enable"    : The Counter Enable signal CNT_EN is used as trigger output.
+		- "reset"     :	The UG bit from the TIMx_EGR register is
+				used as trigger output (TRGO).
+		- "enable"    : The Counter Enable signal CNT_EN is used
+				as trigger output.
 		- "update"    : The update event is selected as trigger output.
-				For instance a master timer can then be used as a prescaler for a slave timer.
-		- "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
+				For instance a master timer can then be used
+				as a prescaler for a slave timer.
+		- "compare_pulse" : The trigger output send a positive pulse
+				    when the CC1IF flag is to be set.
 		- "OC1REF"    : OC1REF signal is used as trigger output.
 		- "OC2REF"    : OC2REF signal is used as trigger output.
 		- "OC3REF"    : OC3REF signal is used as trigger output.
@@ -27,3 +31,62 @@ Description:
 		Reading returns the current sampling frequency.
 		Writing an value different of 0 set and start sampling.
 		Writing 0 stop sampling.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current preset value.
+		Writing sets the preset value.
+		When counting up the counter starts from 0 and fires an
+		event when reach preset value.
+		When counting down the counter start from preset value
+		and fire event when reach 0.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible quadrature modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Configure the device counter quadrature modes:
+		channel_A:
+			Encoder A input servers as the count input and B as
+			the UP/DOWN direction control input.
+
+		channel_B:
+			Encoder B input serves as the count input and A as
+			the UP/DOWN direction control input.
+
+		quadrature:
+			Encoder A and B inputs are mixed to get direction
+			and count with a scale of 0.25.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible enable modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_enable_mode
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Configure the device counter enable modes, in all case
+		counting direction is set by in_count0_count_direction
+		attribute and the counter is clocked by the internal clock.
+		always:
+			Counter is always ON.
+
+		gated:
+			Counting is enabled when connected trigger signal
+			level is high else counting is disabled.
+
+		triggered:
+			Counting is enabled on rising edge of the connected
+			trigger, and remains enabled for the duration of this
+			selected mode.

Documentation/ABI/testing/sysfs-bus-pci

@@ -299,5 +299,27 @@ What:		/sys/bus/pci/devices/.../revision
 Date:		November 2016
 Contact:	Emil Velikov <emil.l.velikov@gmail.com>
 Description:
-		This file contains the revision field of the the PCI device.
+		This file contains the revision field of the PCI device.
 		The value comes from device config space. The file is read only.
+
+What:		/sys/bus/pci/devices/.../sriov_drivers_autoprobe
+Date:		April 2017
+Contact:	Bodong Wang<bodong@mellanox.com>
+Description:
+		This file is associated with the PF of a device that
+		supports SR-IOV.  It determines whether newly-enabled VFs
+		are immediately bound to a driver.  It initially contains
+		1, which means the kernel automatically binds VFs to a
+		compatible driver immediately after they are enabled.  If
+		an application writes 0 to the file before enabling VFs,
+		the kernel will not bind VFs to a driver.
+
+		A typical use case is to write 0 to this file, then enable
+		VFs, then assign the newly-created VFs to virtual machines.
+		Note that changing this file does not affect already-
+		enabled VFs.  In this scenario, the user must first disable
+		the VFs, write 0 to sriov_drivers_autoprobe, then re-enable
+		the VFs.
+
+		This is similar to /sys/bus/pci/drivers_autoprobe, but
+		affects only the VFs associated with a specific PF.

Documentation/ABI/testing/sysfs-class-net-qmi

@@ -21,3 +21,30 @@ Description:
 		is responsible for coordination of driver and firmware
 		link framing mode, changing this setting to 'Y' if the
 		firmware is configured for 'raw-ip' mode.
+
+What:		/sys/class/net/<iface>/qmi/add_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 127 to add a qmap mux
+		based network device, supported by recent Qualcomm based
+		modems.
+
+		The network device will be called qmimux.
+
+		Userspace is in charge of managing the qmux network device
+		activation and data stream setup on the modem side by
+		using the proper QMI protocol requests.
+
+What:		/sys/class/net/<iface>/qmi/del_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 127 to delete a previously
+		created qmap mux based network device.

Documentation/ABI/testing/sysfs-class-switchtec

+switchtec - Microsemi Switchtec PCI Switch Management Endpoint
+
+For details on this subsystem look at Documentation/switchtec.txt.
+
+What: 		/sys/class/switchtec
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	The switchtec class subsystem folder.
+		Each registered switchtec driver is represented by a switchtecX
+		subfolder (X being an integer >= 0).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component identifier as stored in the hardware (eg. PM8543)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component revision stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/device_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Device version as stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/fw_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Currently running firmware version (read only)
+Values: 	integer (in hexadecimal).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Partition number for this device in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition_count
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Total number of partitions in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product identifier as stored in the hardware (eg. PSX 48XG3)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product revision stored in the hardware (eg. RevB)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.

Documentation/ABI/testing/sysfs-class-typec

+USB Type-C port devices (eg. /sys/class/typec/port0/)
+
+What:		/sys/class/typec/<port>/data_role
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The supported USB data roles. This attribute can be used for
+		requesting data role swapping on the port. Swapping is supported
+		as synchronous operation, so write(2) to the attribute will not
+		return until the operation has finished. The attribute is
+		notified about role changes so that poll(2) on the attribute
+		wakes up. Change on the role will also generate uevent
+		KOBJ_CHANGE on the port. The current role is show in brackets,
+		for example "[host] device" when DRP port is in host mode.
+
+		Valid values: host, device
+
+What:		/sys/class/typec/<port>/power_role
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The supported power roles. This attribute can be used to request
+		power role swap on the port when the port supports USB Power
+		Delivery. Swapping is supported as synchronous operation, so
+		write(2) to the attribute will not return until the operation
+		has finished. The attribute is notified about role changes so
+		that poll(2) on the attribute wakes up. Change on the role will
+		also generate uevent KOBJ_CHANGE. The current role is show in
+		brackets, for example "[source] sink" when in source mode.
+
+		Valid values: source, sink
+
+What:		/sys/class/typec/<port>/vconn_source
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows is the port VCONN Source. This attribute can be used to
+		request VCONN swap to change the VCONN Source during connection
+		when both the port and the partner support USB Power Delivery.
+		Swapping is supported as synchronous operation, so write(2) to
+		the attribute will not return until the operation has finished.
+		The attribute is notified about VCONN source changes so that
+		poll(2) on the attribute wakes up. Change on VCONN source also
+		generates uevent KOBJ_CHANGE.
+
+		Valid values:
+		- "no" when the port is not the VCONN Source
+		- "yes" when the port is the VCONN Source
+
+What:		/sys/class/typec/<port>/power_operation_mode
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the current power operational mode the port is in. The
+		power operation mode means current level for VBUS. In case USB
+		Power Delivery communication is used for negotiating the levels,
+		power operation mode should show "usb_power_delivery".
+
+		Valid values:
+		- default
+		- 1.5A
+		- 3.0A
+		- usb_power_delivery
+
+What:		/sys/class/typec/<port>/preferred_role
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The user space can notify the driver about the preferred role.
+		It should be handled as enabling of Try.SRC or Try.SNK, as
+		defined in USB Type-C specification, in the port drivers. By
+		default the preferred role should come from the platform.
+
+		Valid values: source, sink, none (to remove preference)
+
+What:		/sys/class/typec/<port>/supported_accessory_modes
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Space separated list of accessory modes, defined in the USB
+		Type-C specification, the port supports.
+
+What:		/sys/class/typec/<port>/usb_power_delivery_revision
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Revision number of the supported USB Power Delivery
+		specification, or 0 when USB Power Delivery is not supported.
+
+What:		/sys/class/typec/<port>/usb_typec_revision
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Revision number of the supported USB Type-C specification.
+
+
+USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
+
+What:		/sys/class/typec/<port>-partner/accessory_mode
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the Accessory Mode name when the partner is an Accessory.
+		The Accessory Modes are defined in USB Type-C Specification.
+
+What:		/sys/class/typec/<port>-partner/supports_usb_power_delivery
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the partner supports USB Power Delivery communication:
+		Valid values: yes, no
+
+What:		/sys/class/typec/<port>-partner>/identity/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This directory appears only if the port device driver is capable
+		of showing the result of Discover Identity USB power delivery
+		command. That will not always be possible even when USB power
+		delivery is supported, for example when USB power delivery
+		communication for the port is mostly handled in firmware. If the
+		directory exists, it will have an attribute file for every VDO
+		in Discover Identity command result.
+
+What:		/sys/class/typec/<port>-partner/identity/id_header
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		ID Header VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-partner/identity/cert_stat
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Cert Stat VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-partner/identity/product
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Product VDO part of Discover Identity command result. The value
+		will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+
+USB Type-C cable devices (eg. /sys/class/typec/port0-cable/)
+
+Note: Electronically Marked Cables will have a device also for one cable plug
+(eg. /sys/class/typec/port0-plug0). If the cable is active and has also SOP
+Double Prime controller (USB Power Deliver specification ch. 2.4) it will have
+second device also for the other plug. Both plugs may have alternate modes as
+described in USB Type-C and USB Power Delivery specifications.
+
+What:		/sys/class/typec/<port>-cable/type
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the cable is active.
+		Valid values: active, passive
+
+What:		/sys/class/typec/<port>-cable/plug_type
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows type of the plug on the cable:
+		- type-a - Standard A
+		- type-b - Standard B
+		- type-c
+		- captive
+
+What:		/sys/class/typec/<port>-cable/identity/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This directory appears only if the port device driver is capable
+		of showing the result of Discover Identity USB power delivery
+		command. That will not always be possible even when USB power
+		delivery is supported. If the directory exists, it will have an
+		attribute for every VDO returned by Discover Identity command.
+
+What:		/sys/class/typec/<port>-cable/identity/id_header
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		ID Header VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-cable/identity/cert_stat
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Cert Stat VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-cable/identity/product
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Product VDO part of Discover Identity command result. The value
+		will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+
+Alternate Mode devices.
+
+The alternate modes will have Standard or Vendor ID (SVID) assigned by USB-IF.
+The ports, partners and cable plugs can have alternate modes. A supported SVID
+will consist of a set of modes. Every SVID a port/partner/plug supports will
+have a device created for it, and every supported mode for a supported SVID will
+have its own directory under that device. Below <dev> refers to the device for
+the alternate mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/svid
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The SVID (Standard or Vendor ID) assigned by USB-IF for this
+		alternate mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Every supported mode will have its own directory. The name of
+		a mode will be "mode<index>" (for example mode1), where <index>
+		is the actual index to the mode VDO returned by Discover Modes
+		USB power delivery command.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/description
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows description of the mode. The description is optional for
+		the drivers, just like with the Billboard Devices.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/vdo
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the VDO in hexadecimal returned by Discover Modes command
+		for this mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/active
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the mode is active or not. The attribute can be used
+		for entering/exiting the mode with partners and cable plugs, and
+		with the port alternate modes it can be used for disabling
+		support for specific alternate modes. Entering/exiting modes is
+		supported as synchronous operation so write(2) to the attribute
+		does not return until the enter/exit mode operation has
+		finished. The attribute is notified when the mode is
+		entered/exited so poll(2) on the attribute wakes up.
+		Entering/exiting a mode will also generate uevent KOBJ_CHANGE.
+
+		Valid values: yes, no
+
+What:		/sys/class/typec/<port>/<dev>/mode<index>/supported_roles
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Space separated list of the supported roles.
+
+		This attribute is available for the devices describing the
+		alternate modes a port supports, and it will not be exposed with
+		the devices presenting the alternate modes the partners or cable
+		plugs support.
+
+		Valid values: source, sink

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -366,3 +366,10 @@ Contact:	Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
 Description:	AArch64 CPU registers
 		'identification' directory exposes the CPU ID registers for
 		 identifying model and revision of the CPU.
+
+What:		/sys/devices/system/cpu/cpu#/cpu_capacity
+Date:		December 2016
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	information about CPUs heterogeneity.
+
+		cpu_capacity: capacity of cpu#.

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -44,16 +44,6 @@ Description:
 		or 0 (unset).  Attempts to write any other values to it will
 		cause -EINVAL to be returned.
 
-What:		/sys/firmware/acpi/hotplug/force_remove
-Date:		May 2013
-Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-Description:
-		The number in this file (0 or 1) determines whether (1) or not
-		(0) the ACPI subsystem will allow devices to be hot-removed even
-		if they cannot be put offline gracefully (from the kernel's
-		viewpoint).  That number can be changed by writing a boolean
-		value to this file.
-
 What:		/sys/firmware/acpi/interrupts/
 Date:		February 2008
 Contact:	Len Brown <lenb@kernel.org>

Documentation/ABI/testing/sysfs-kernel-livepatch

@@ -25,6 +25,14 @@ Description:
 		code is currently applied.  Writing 0 will disable the patch
 		while writing 1 will re-enable the patch.
 
+What:		/sys/kernel/livepatch/<patch>/transition
+Date:		Feb 2017
+KernelVersion:	4.12.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		An attribute which indicates whether the patch is currently in
+		transition.
+
 What:		/sys/kernel/livepatch/<patch>/<object>
 Date:		Nov 2014
 KernelVersion:	3.19.0

Documentation/ABI/testing/sysfs-platform-chipidea-usb2

+What:		/sys/bus/platform/devices/ci_hdrc.0/role
+Date:		Mar 2017
+Contact:	Peter Chen <peter.chen@nxp.com>
+Description:
+		It returns string "gadget" or "host" when read it, it indicates
+		current controller role.
+
+		It will do role switch when write "gadget" or "host" to it.
+		Only controller at dual-role configuration supports writing.

Documentation/ABI/testing/sysfs-platform-renesas_usb3

+What:		/sys/devices/platform/<renesas_usb3's name>/role
+Date:		March 2017
+KernelVersion:	4.13
+Contact:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Description:
+		This file can be read and write.
+		The file can show/change the drd mode of usb.
+
+		Write the following string to change the mode:
+		 "host" - switching mode from peripheral to host.
+		 "peripheral" - switching mode from host to peripheral.
+
+		Read the file, then it shows the following strings:
+		 "host" - The mode is host now.
+		 "peripheral" - The mode is peripheral now.

Documentation/DocBook/Makefile

@@ -8,12 +8,11 @@
 
 DOCBOOKS := z8530book.xml  \
 	    kernel-hacking.xml kernel-locking.xml \
-	    writing_usb_driver.xml networking.xml \
-	    kernel-api.xml filesystems.xml lsm.xml kgdb.xml \
-	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
-	    genericirq.xml s390-drivers.xml scsi.xml \
-	    sh.xml w1.xml \
-	    writing_musb_glue_layer.xml
+	    networking.xml \
+	    filesystems.xml lsm.xml kgdb.xml \
+	    libata.xml mtdnand.xml librs.xml rapidio.xml \
+	    s390-drivers.xml scsi.xml \
+	    sh.xml w1.xml
 
 ifeq ($(DOCBOOKS),)
 
@@ -62,11 +61,14 @@ MAN := $(patsubst %.xml, %.9, $(BOOKS))
 mandocs: $(MAN)
 	find $(obj)/man -name '*.9' | xargs gzip -nf
 
+# Default location for installed man pages
+export INSTALL_MAN_PATH = $(objtree)/usr
+
 installmandocs: mandocs
-	mkdir -p /usr/local/man/man9/
+	mkdir -p $(INSTALL_MAN_PATH)/man/man9/
 	find $(obj)/man -name '*.9.gz' -printf '%h %f\n' | \
 		sort -k 2 -k 1 | uniq -f 1 | sed -e 's: :/:' | \
-		xargs install -m 644 -t /usr/local/man/man9/
+		xargs install -m 644 -t $(INSTALL_MAN_PATH)/man/man9/
 
 # no-op for the DocBook toolchain
 epubdocs:
@@ -238,7 +240,9 @@ dochelp:
 	@echo  '  psdocs          - Postscript'
 	@echo  '  xmldocs         - XML DocBook'
 	@echo  '  mandocs         - man pages'
-	@echo  '  installmandocs  - install man pages generated by mandocs'
+	@echo  '  installmandocs  - install man pages generated by mandocs to INSTALL_MAN_PATH'; \
+	 echo  '                    (default: $(INSTALL_MAN_PATH))'; \
+	 echo  ''
 	@echo  '  cleandocs       - clean all generated DocBook files'
 	@echo
 	@echo  '  make DOCBOOKS="s1.xml s2.xml" [target] Generate only docs s1.xml s2.xml'

Documentation/DocBook/genericirq.tmpl

-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="Generic-IRQ-Guide">
- <bookinfo>
-  <title>Linux generic IRQ handling</title>
-
-  <authorgroup>
-   <author>
-    <firstname>Thomas</firstname>
-    <surname>Gleixner</surname>
-    <affiliation>
-     <address>
-      <email>tglx@linutronix.de</email>
-     </address>
-    </affiliation>
-   </author>
-   <author>
-    <firstname>Ingo</firstname>
-    <surname>Molnar</surname>
-    <affiliation>
-     <address>
-      <email>mingo@elte.hu</email>
-     </address>
-    </affiliation>
-   </author>
-  </authorgroup>
-
-  <copyright>
-   <year>2005-2010</year>
-   <holder>Thomas Gleixner</holder>
-  </copyright>
-  <copyright>
-   <year>2005-2006</year>
-   <holder>Ingo Molnar</holder>
-  </copyright>
-
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License version 2 as published by the Free Software Foundation.
-   </para>
-
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-  </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
-  <chapter id="intro">
-    <title>Introduction</title>
-    <para>
-	The generic interrupt handling layer is designed to provide a
-	complete abstraction of interrupt handling for device drivers.
-	It is able to handle all the different types of interrupt controller
-	hardware. Device drivers use generic API functions to request, enable,
-	disable and free interrupts. The drivers do not have to know anything
-	about interrupt hardware details, so they can be used on different
-	platforms without code changes.
-    </para>
-    <para>
-  	This documentation is provided to developers who want to implement
-	an interrupt subsystem based for their architecture, with the help
-	of the generic IRQ handling layer.
-    </para>
-  </chapter>
-
-  <chapter id="rationale">
-    <title>Rationale</title>
-	<para>
-	The original implementation of interrupt handling in Linux uses
-	the __do_IRQ() super-handler, which is able to deal with every
-	type of interrupt logic.
-	</para>
-	<para>
-	Originally, Russell King identified different types of handlers to
-	build a quite universal set for the ARM interrupt handler
-	implementation in Linux 2.5/2.6. He distinguished between:
-	<itemizedlist>
-	  <listitem><para>Level type</para></listitem>
-	  <listitem><para>Edge type</para></listitem>
-	  <listitem><para>Simple type</para></listitem>
-	</itemizedlist>
-	During the implementation we identified another type:
-	<itemizedlist>
-	  <listitem><para>Fast EOI type</para></listitem>
-	</itemizedlist>
-	In the SMP world of the __do_IRQ() super-handler another type
-	was identified:
-	<itemizedlist>
-	  <listitem><para>Per CPU type</para></listitem>
-	</itemizedlist>
-	</para>
-	<para>
-	This split implementation of high-level IRQ handlers allows us to
-	optimize the flow of the interrupt handling for each specific
-	interrupt type. This reduces complexity in that particular code path
-	and allows the optimized handling of a given type.
-	</para>
-	<para>
-	The original general IRQ implementation used hw_interrupt_type
-	structures and their ->ack(), ->end() [etc.] callbacks to
-	differentiate the flow control in the super-handler. This leads to
-	a mix of flow logic and low-level hardware logic, and it also leads
-	to unnecessary code duplication: for example in i386, there is an
-	ioapic_level_irq and an ioapic_edge_irq IRQ-type which share many
-	of the low-level details but have different flow handling.
-	</para>
-	<para>
-	A more natural abstraction is the clean separation of the
-	'irq flow' and the 'chip details'.
-	</para>
-	<para>
-	Analysing a couple of architecture's IRQ subsystem implementations
-	reveals that most of them can use a generic set of 'irq flow'
-	methods and only need to add the chip-level specific code.
-	The separation is also valuable for (sub)architectures
-	which need specific quirks in the IRQ flow itself but not in the
-	chip details - and thus provides a more transparent IRQ subsystem
-	design.
-	</para>
-	<para>
-	Each interrupt descriptor is assigned its own high-level flow
-	handler, which is normally one of the generic
-	implementations. (This high-level flow handler implementation also
-	makes it simple to provide demultiplexing handlers which can be
-	found in embedded platforms on various architectures.)
-	</para>
-	<para>
-	The separation makes the generic interrupt handling layer more
-	flexible and extensible. For example, an (sub)architecture can
-	use a generic IRQ-flow implementation for 'level type' interrupts
-	and add a (sub)architecture specific 'edge type' implementation.
-	</para>
-	<para>
-	To make the transition to the new model easier and prevent the
-	breakage of existing implementations, the __do_IRQ() super-handler
-	is still available. This leads to a kind of duality for the time
-	being. Over time the new model should be used in more and more
-	architectures, as it enables smaller and cleaner IRQ subsystems.
-	It's deprecated for three years now and about to be removed.
-	</para>
-  </chapter>
-  <chapter id="bugs">
-    <title>Known Bugs And Assumptions</title>
-    <para>
-	None (knock on wood).
-    </para>
-  </chapter>
-
-  <chapter id="Abstraction">
-    <title>Abstraction layers</title>
-    <para>
-	There are three main levels of abstraction in the interrupt code:
-	<orderedlist>
-	  <listitem><para>High-level driver API</para></listitem>
-	  <listitem><para>High-level IRQ flow handlers</para></listitem>
-	  <listitem><para>Chip-level hardware encapsulation</para></listitem>
-	</orderedlist>
-    </para>
-    <sect1 id="Interrupt_control_flow">
-	<title>Interrupt control flow</title>
-	<para>
-	Each interrupt is described by an interrupt descriptor structure
-	irq_desc. The interrupt is referenced by an 'unsigned int' numeric
-	value which selects the corresponding interrupt description structure
-	in the descriptor structures array.
-	The descriptor structure contains status information and pointers
-	to the interrupt flow method and the interrupt chip structure
-	which are assigned to this interrupt.
-	</para>
-	<para>
-	Whenever an interrupt triggers, the low-level architecture code calls
-	into the generic interrupt code by calling desc->handle_irq().
-	This high-level IRQ handling function only uses desc->irq_data.chip
-	primitives referenced by the assigned chip descriptor structure.
-	</para>
-    </sect1>
-    <sect1 id="Highlevel_Driver_API">
-	<title>High-level Driver API</title>
-	<para>
-	  The high-level Driver API consists of following functions:
-	  <itemizedlist>
-	  <listitem><para>request_irq()</para></listitem>
-	  <listitem><para>free_irq()</para></listitem>
-	  <listitem><para>disable_irq()</para></listitem>
-	  <listitem><para>enable_irq()</para></listitem>
-	  <listitem><para>disable_irq_nosync() (SMP only)</para></listitem>
-	  <listitem><para>synchronize_irq() (SMP only)</para></listitem>
-	  <listitem><para>irq_set_irq_type()</para></listitem>
-	  <listitem><para>irq_set_irq_wake()</para></listitem>
-	  <listitem><para>irq_set_handler_data()</para></listitem>
-	  <listitem><para>irq_set_chip()</para></listitem>
-	  <listitem><para>irq_set_chip_data()</para></listitem>
-          </itemizedlist>
-	  See the autogenerated function documentation for details.
-	</para>
-    </sect1>
-    <sect1 id="Highlevel_IRQ_flow_handlers">
-	<title>High-level IRQ flow handlers</title>
-	<para>
-	  The generic layer provides a set of pre-defined irq-flow methods:
-	  <itemizedlist>
-	  <listitem><para>handle_level_irq</para></listitem>
-	  <listitem><para>handle_edge_irq</para></listitem>
-	  <listitem><para>handle_fasteoi_irq</para></listitem>
-	  <listitem><para>handle_simple_irq</para></listitem>
-	  <listitem><para>handle_percpu_irq</para></listitem>
-	  <listitem><para>handle_edge_eoi_irq</para></listitem>
-	  <listitem><para>handle_bad_irq</para></listitem>
-	  </itemizedlist>
-	  The interrupt flow handlers (either pre-defined or architecture
-	  specific) are assigned to specific interrupts by the architecture
-	  either during bootup or during device initialization.
-	</para>
-	<sect2 id="Default_flow_implementations">
-	<title>Default flow implementations</title>
-	    <sect3 id="Helper_functions">
-	 	<title>Helper functions</title>
-		<para>
-		The helper functions call the chip primitives and
-		are used by the default flow implementations.
-		The following helper functions are implemented (simplified excerpt):
-		<programlisting>
-default_enable(struct irq_data *data)
-{
-	desc->irq_data.chip->irq_unmask(data);
-}
-
-default_disable(struct irq_data *data)
-{
-	if (!delay_disable(data))
-		desc->irq_data.chip->irq_mask(data);
-}
-
-default_ack(struct irq_data *data)
-{
-	chip->irq_ack(data);
-}
-
-default_mask_ack(struct irq_data *data)
-{
-	if (chip->irq_mask_ack) {
-		chip->irq_mask_ack(data);
-	} else {
-		chip->irq_mask(data);
-		chip->irq_ack(data);
-	}
-}
-
-noop(struct irq_data *data))
-{
-}
-
-		</programlisting>
-	        </para>
-	    </sect3>
-	</sect2>
-	<sect2 id="Default_flow_handler_implementations">
-	<title>Default flow handler implementations</title>
-	    <sect3 id="Default_Level_IRQ_flow_handler">
-	 	<title>Default Level IRQ flow handler</title>
-		<para>
-		handle_level_irq provides a generic implementation
-		for level-triggered interrupts.
-		</para>
-		<para>
-		The following control flow is implemented (simplified excerpt):
-		<programlisting>
-desc->irq_data.chip->irq_mask_ack();
-handle_irq_event(desc->action);
-desc->irq_data.chip->irq_unmask();
-		</programlisting>
-		</para>
-	    </sect3>
-	    <sect3 id="Default_FASTEOI_IRQ_flow_handler">
-		<title>Default Fast EOI IRQ flow handler</title>
-		<para>
-		handle_fasteoi_irq provides a generic implementation
-		for interrupts, which only need an EOI at the end of
-		the handler.
-		</para>
-		<para>
-		The following control flow is implemented (simplified excerpt):
-		<programlisting>
-handle_irq_event(desc->action);
-desc->irq_data.chip->irq_eoi();
-		</programlisting>
-		</para>
-	    </sect3>
-	    <sect3 id="Default_Edge_IRQ_flow_handler">
-	 	<title>Default Edge IRQ flow handler</title>
-		<para>
-		handle_edge_irq provides a generic implementation
-		for edge-triggered interrupts.
-		</para>
-		<para>
-		The following control flow is implemented (simplified excerpt):
-		<programlisting>
-if (desc->status &amp; running) {
-	desc->irq_data.chip->irq_mask_ack();
-	desc->status |= pending | masked;
-	return;
-}
-desc->irq_data.chip->irq_ack();
-desc->status |= running;
-do {
-	if (desc->status &amp; masked)
-		desc->irq_data.chip->irq_unmask();
-	desc->status &amp;= ~pending;
-	handle_irq_event(desc->action);
-} while (status &amp; pending);
-desc->status &amp;= ~running;
-		</programlisting>
-		</para>
-   	    </sect3>
-	    <sect3 id="Default_simple_IRQ_flow_handler">
-	 	<title>Default simple IRQ flow handler</title>
-		<para>
-		handle_simple_irq provides a generic implementation
-		for simple interrupts.
-		</para>
-		<para>
-		Note: The simple flow handler does not call any
-		handler/chip primitives.
-		</para>
-		<para>
-		The following control flow is implemented (simplified excerpt):
-		<programlisting>
-handle_irq_event(desc->action);
-		</programlisting>
-		</para>
-   	    </sect3>
-	    <sect3 id="Default_per_CPU_flow_handler">
-	 	<title>Default per CPU flow handler</title>
-		<para>
-		handle_percpu_irq provides a generic implementation
-		for per CPU interrupts.
-		</para>
-		<para>
-		Per CPU interrupts are only available on SMP and
-		the handler provides a simplified version without
-		locking.
-		</para>
-		<para>
-		The following control flow is implemented (simplified excerpt):
-		<programlisting>
-if (desc->irq_data.chip->irq_ack)
-	desc->irq_data.chip->irq_ack();
-handle_irq_event(desc->action);
-if (desc->irq_data.chip->irq_eoi)
-        desc->irq_data.chip->irq_eoi();
-		</programlisting>
-		</para>
-   	    </sect3>
-	    <sect3 id="EOI_Edge_IRQ_flow_handler">
-	 	<title>EOI Edge IRQ flow handler</title>
-		<para>
-		handle_edge_eoi_irq provides an abnomination of the edge
-		handler which is solely used to tame a badly wreckaged
-		irq controller on powerpc/cell.
-		</para>
-   	    </sect3>
-	    <sect3 id="BAD_IRQ_flow_handler">
-	 	<title>Bad IRQ flow handler</title>
-		<para>
-		handle_bad_irq is used for spurious interrupts which
-		have no real handler assigned..
-		</para>
-   	    </sect3>
-	</sect2>
-	<sect2 id="Quirks_and_optimizations">
-	<title>Quirks and optimizations</title>
-	<para>
-	The generic functions are intended for 'clean' architectures and chips,
-	which have no platform-specific IRQ handling quirks. If an architecture
-	needs to implement quirks on the 'flow' level then it can do so by
-	overriding the high-level irq-flow handler.
-	</para>
-	</sect2>
-	<sect2 id="Delayed_interrupt_disable">
-	<title>Delayed interrupt disable</title>
-	<para>
-	This per interrupt selectable feature, which was introduced by Russell
-	King in the ARM interrupt implementation, does not mask an interrupt
-	at the hardware level when disable_irq() is called. The interrupt is
-	kept enabled and is masked in the flow handler when an interrupt event
-	happens. This prevents losing edge interrupts on hardware which does
-	not store an edge interrupt event while the interrupt is disabled at
-	the hardware level. When an interrupt arrives while the IRQ_DISABLED
-	flag is set, then the interrupt is masked at the hardware level and
-	the IRQ_PENDING bit is set. When the interrupt is re-enabled by
-	enable_irq() the pending bit is checked and if it is set, the
-	interrupt is resent either via hardware or by a software resend
-	mechanism. (It's necessary to enable CONFIG_HARDIRQS_SW_RESEND when
-	you want to use the delayed interrupt disable feature and your
-	hardware is not capable of retriggering	an interrupt.)
-	The delayed interrupt disable is not configurable.
-	</para>
-	</sect2>
-    </sect1>
-    <sect1 id="Chiplevel_hardware_encapsulation">
-	<title>Chip-level hardware encapsulation</title>
-	<para>
-	The chip-level hardware descriptor structure irq_chip
-	contains all the direct chip relevant functions, which
-	can be utilized by the irq flow implementations.
-	  <itemizedlist>
-	  <listitem><para>irq_ack()</para></listitem>
-	  <listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
-	  <listitem><para>irq_mask()</para></listitem>
-	  <listitem><para>irq_unmask()</para></listitem>
-	  <listitem><para>irq_eoi() - Optional, required for EOI flow handlers</para></listitem>
-	  <listitem><para>irq_retrigger() - Optional</para></listitem>
-	  <listitem><para>irq_set_type() - Optional</para></listitem>
-	  <listitem><para>irq_set_wake() - Optional</para></listitem>
-	  </itemizedlist>
-	These primitives are strictly intended to mean what they say: ack means
-	ACK, masking means masking of an IRQ line, etc. It is up to the flow
-	handler(s) to use these basic units of low-level functionality.
-	</para>
-    </sect1>
-  </chapter>
-
-  <chapter id="doirq">
-     <title>__do_IRQ entry point</title>
-     <para>
-	The original implementation __do_IRQ() was an alternative entry
-	point for all types of interrupts. It no longer exists.
-     </para>
-     <para>
-	This handler turned out to be not suitable for all
-	interrupt hardware and was therefore reimplemented with split
-	functionality for edge/level/simple/percpu interrupts. This is not
-	only a functional optimization. It also shortens code paths for
-	interrupts.
-      </para>
-  </chapter>
-
-  <chapter id="locking">
-     <title>Locking on SMP</title>
-     <para>
-	The locking of chip registers is up to the architecture that
-	defines the chip primitives. The per-irq structure is
-	protected via desc->lock, by the generic layer.
-     </para>
-  </chapter>
-
-  <chapter id="genericchip">
-     <title>Generic interrupt chip</title>
-     <para>
-       To avoid copies of identical implementations of IRQ chips the
-       core provides a configurable generic interrupt chip
-       implementation. Developers should check carefully whether the
-       generic chip fits their needs before implementing the same
-       functionality slightly differently themselves.
-     </para>
-!Ekernel/irq/generic-chip.c
-  </chapter>
-
-  <chapter id="structs">
-     <title>Structures</title>
-     <para>
-     This chapter contains the autogenerated documentation of the structures which are
-     used in the generic IRQ layer.
-     </para>
-!Iinclude/linux/irq.h
-!Iinclude/linux/interrupt.h
-  </chapter>
-
-  <chapter id="pubfunctions">
-     <title>Public Functions Provided</title>
-     <para>
-     This chapter contains the autogenerated documentation of the kernel API functions
-      which are exported.
-     </para>
-!Ekernel/irq/manage.c
-!Ekernel/irq/chip.c
-  </chapter>
-
-  <chapter id="intfunctions">
-     <title>Internal Functions Provided</title>
-     <para>
-     This chapter contains the autogenerated documentation of the internal functions.
-     </para>
-!Ikernel/irq/irqdesc.c
-!Ikernel/irq/handle.c
-!Ikernel/irq/chip.c
-  </chapter>
-
-  <chapter id="credits">
-     <title>Credits</title>
-	<para>
-		The following people have contributed to this document:
-		<orderedlist>
-			<listitem><para>Thomas Gleixner<email>tglx@linutronix.de</email></para></listitem>
-			<listitem><para>Ingo Molnar<email>mingo@elte.hu</email></para></listitem>
-		</orderedlist>
-	</para>
-  </chapter>
-</book>

Documentation/DocBook/kernel-api.tmpl

-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="LinuxKernelAPI">
- <bookinfo>
-  <title>The Linux Kernel API</title>
-  
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License as published by the Free Software Foundation; either
-     version 2 of the License, or (at your option) any later
-     version.
-   </para>
-      
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-      
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-      
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-  </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
-  <chapter id="adt">
-     <title>Data Types</title>
-     <sect1><title>Doubly Linked Lists</title>
-!Iinclude/linux/list.h
-     </sect1>
-  </chapter>
-
-  <chapter id="libc">
-     <title>Basic C Library Functions</title>
-
-     <para>
-       When writing drivers, you cannot in general use routines which are
-       from the C Library.  Some of the functions have been found generally
-       useful and they are listed below.  The behaviour of these functions
-       may vary slightly from those defined by ANSI, and these deviations
-       are noted in the text.
-     </para>
-
-     <sect1><title>String Conversions</title>
-!Elib/vsprintf.c
-!Finclude/linux/kernel.h kstrtol
-!Finclude/linux/kernel.h kstrtoul
-!Elib/kstrtox.c
-     </sect1>
-     <sect1><title>String Manipulation</title>
-<!-- All functions are exported at now
-X!Ilib/string.c
- -->
-!Elib/string.c
-     </sect1>
-     <sect1><title>Bit Operations</title>
-!Iarch/x86/include/asm/bitops.h
-     </sect1>
-  </chapter>
-
-  <chapter id="kernel-lib">
-     <title>Basic Kernel Library Functions</title>
-
-     <para>
-       The Linux kernel provides more basic utility functions.
-     </para>
-
-     <sect1><title>Bitmap Operations</title>
-!Elib/bitmap.c
-!Ilib/bitmap.c
-     </sect1>
-
-     <sect1><title>Command-line Parsing</title>
-!Elib/cmdline.c
-     </sect1>
-
-     <sect1 id="crc"><title>CRC Functions</title>
-!Elib/crc7.c
-!Elib/crc16.c
-!Elib/crc-itu-t.c
-!Elib/crc32.c
-!Elib/crc-ccitt.c
-     </sect1>
-
-     <sect1 id="idr"><title>idr/ida Functions</title>
-!Pinclude/linux/idr.h idr sync
-!Plib/idr.c IDA description
-!Elib/idr.c
-     </sect1>
-  </chapter>
-
-  <chapter id="mm">
-     <title>Memory Management in Linux</title>
-     <sect1><title>The Slab Cache</title>
-!Iinclude/linux/slab.h
-!Emm/slab.c
-!Emm/util.c
-     </sect1>
-     <sect1><title>User Space Memory Access</title>
-!Iarch/x86/include/asm/uaccess_32.h
-!Earch/x86/lib/usercopy_32.c
-     </sect1>
-     <sect1><title>More Memory Management Functions</title>
-!Emm/readahead.c
-!Emm/filemap.c
-!Emm/memory.c
-!Emm/vmalloc.c
-!Imm/page_alloc.c
-!Emm/mempool.c
-!Emm/dmapool.c
-!Emm/page-writeback.c
-!Emm/truncate.c
-     </sect1>
-  </chapter>
-
-
-  <chapter id="ipc">
-     <title>Kernel IPC facilities</title>
-
-     <sect1><title>IPC utilities</title>
-!Iipc/util.c
-     </sect1>
-  </chapter>
-
-  <chapter id="kfifo">
-     <title>FIFO Buffer</title>
-     <sect1><title>kfifo interface</title>
-!Iinclude/linux/kfifo.h
-     </sect1>
-  </chapter>
-
-  <chapter id="relayfs">
-     <title>relay interface support</title>
-
-     <para>
-	Relay interface support
-	is designed to provide an efficient mechanism for tools and
-	facilities to relay large amounts of data from kernel space to
-	user space.
-     </para>
-
-     <sect1><title>relay interface</title>
-!Ekernel/relay.c
-!Ikernel/relay.c
-     </sect1>
-  </chapter>
-
-  <chapter id="modload">
-     <title>Module Support</title>
-     <sect1><title>Module Loading</title>
-!Ekernel/kmod.c
-     </sect1>
-     <sect1><title>Inter Module support</title>
-        <para>
-           Refer to the file kernel/module.c for more information.
-        </para>
-<!-- FIXME: Removed for now since no structured comments in source
-X!Ekernel/module.c
--->
-     </sect1>
-  </chapter>
-
-  <chapter id="hardware">
-     <title>Hardware Interfaces</title>
-     <sect1><title>Interrupt Handling</title>
-!Ekernel/irq/manage.c
-     </sect1>
-
-     <sect1><title>DMA Channels</title>
-!Ekernel/dma.c
-     </sect1>
-
-     <sect1><title>Resources Management</title>
-!Ikernel/resource.c
-!Ekernel/resource.c
-     </sect1>
-
-     <sect1><title>MTRR Handling</title>
-!Earch/x86/kernel/cpu/mtrr/main.c
-     </sect1>
-
-     <sect1><title>PCI Support Library</title>
-!Edrivers/pci/pci.c
-!Edrivers/pci/pci-driver.c
-!Edrivers/pci/remove.c
-!Edrivers/pci/search.c
-!Edrivers/pci/msi.c
-!Edrivers/pci/bus.c
-!Edrivers/pci/access.c
-!Edrivers/pci/irq.c
-!Edrivers/pci/htirq.c
-<!-- FIXME: Removed for now since no structured comments in source
-X!Edrivers/pci/hotplug.c
--->
-!Edrivers/pci/probe.c
-!Edrivers/pci/slot.c
-!Edrivers/pci/rom.c
-!Edrivers/pci/iov.c
-!Idrivers/pci/pci-sysfs.c
-     </sect1>
-     <sect1><title>PCI Hotplug Support Library</title>
-!Edrivers/pci/hotplug/pci_hotplug_core.c
-     </sect1>
-  </chapter>
-
-  <chapter id="firmware">
-     <title>Firmware Interfaces</title>
-     <sect1><title>DMI Interfaces</title>
-!Edrivers/firmware/dmi_scan.c
-     </sect1>
-     <sect1><title>EDD Interfaces</title>
-!Idrivers/firmware/edd.c
-     </sect1>
-  </chapter>
-
-  <chapter id="security">
-     <title>Security Framework</title>
-!Isecurity/security.c
-!Esecurity/inode.c
-  </chapter>
-
-  <chapter id="audit">
-     <title>Audit Interfaces</title>
-!Ekernel/audit.c
-!Ikernel/auditsc.c
-!Ikernel/auditfilter.c
-  </chapter>
-
-  <chapter id="accounting">
-     <title>Accounting Framework</title>
-!Ikernel/acct.c
-  </chapter>
-
-  <chapter id="blkdev">
-     <title>Block Devices</title>
-!Eblock/blk-core.c
-!Iblock/blk-core.c
-!Eblock/blk-map.c
-!Iblock/blk-sysfs.c
-!Eblock/blk-settings.c
-!Eblock/blk-exec.c
-!Eblock/blk-flush.c
-!Eblock/blk-lib.c
-!Eblock/blk-tag.c
-!Iblock/blk-tag.c
-!Eblock/blk-integrity.c
-!Ikernel/trace/blktrace.c
-!Iblock/genhd.c
-!Eblock/genhd.c
-  </chapter>
-
-  <chapter id="chrdev">
-	<title>Char devices</title>
-!Efs/char_dev.c
-  </chapter>
-
-  <chapter id="miscdev">
-     <title>Miscellaneous Devices</title>
-!Edrivers/char/misc.c
-  </chapter>
-
-  <chapter id="clk">
-     <title>Clock Framework</title>
-
-     <para>
-	The clock framework defines programming interfaces to support
-	software management of the system clock tree.
-	This framework is widely used with System-On-Chip (SOC) platforms
-	to support power management and various devices which may need
-	custom clock rates.
-	Note that these "clocks" don't relate to timekeeping or real
-	time clocks (RTCs), each of which have separate frameworks.
-	These <structname>struct clk</structname> instances may be used
-	to manage for example a 96 MHz signal that is used to shift bits
-	into and out of peripherals or busses, or otherwise trigger
-	synchronous state machine transitions in system hardware.
-     </para>
-
-     <para>
-	Power management is supported by explicit software clock gating:
-	unused clocks are disabled, so the system doesn't waste power
-	changing the state of transistors that aren't in active use.
-	On some systems this may be backed by hardware clock gating,
-	where clocks are gated without being disabled in software.
-	Sections of chips that are powered but not clocked may be able
-	to retain their last state.
-	This low power state is often called a <emphasis>retention
-	mode</emphasis>.
-	This mode still incurs leakage currents, especially with finer
-	circuit geometries, but for CMOS circuits power is mostly used
-	by clocked state changes.
-     </para>
-
-     <para>
-	Power-aware drivers only enable their clocks when the device
-	they manage is in active use.  Also, system sleep states often
-	differ according to which clock domains are active:  while a
-	"standby" state may allow wakeup from several active domains, a
-	"mem" (suspend-to-RAM) state may require a more wholesale shutdown
-	of clocks derived from higher speed PLLs and oscillators, limiting
-	the number of possible wakeup event sources.  A driver's suspend
-	method may need to be aware of system-specific clock constraints
-	on the target sleep state.
-     </para>
-
-     <para>
-        Some platforms support programmable clock generators.  These
-	can be used by external chips of various kinds, such as other
-	CPUs, multimedia codecs, and devices with strict requirements
-	for interface clocking.
-     </para>
-
-!Iinclude/linux/clk.h
-  </chapter>
-
-</book>

Documentation/DocBook/rapidio.tmpl

@@ -128,9 +128,6 @@
      </sect1>
      <sect1 id="Device_model_support"><title>Device model support</title>
 !Idrivers/rapidio/rio-driver.c
-     </sect1>
-     <sect1 id="Sysfs_support"><title>Sysfs support</title>
-!Idrivers/rapidio/rio-sysfs.c
      </sect1>
      <sect1 id="PPC32_support"><title>PPC32 support</title>
 !Iarch/powerpc/sysdev/fsl_rio.c

Documentation/DocBook/writing_usb_driver.tmpl

-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="USBDeviceDriver">
- <bookinfo>
-  <title>Writing USB Device Drivers</title>
-  
-  <authorgroup>
-   <author>
-    <firstname>Greg</firstname>
-    <surname>Kroah-Hartman</surname>
-    <affiliation>
-     <address>
-      <email>greg@kroah.com</email>
-     </address>
-    </affiliation>
-   </author>
-  </authorgroup>
-
-  <copyright>
-   <year>2001-2002</year>
-   <holder>Greg Kroah-Hartman</holder>
-  </copyright>
-
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License as published by the Free Software Foundation; either
-     version 2 of the License, or (at your option) any later
-     version.
-   </para>
-      
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-      
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-      
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-
-   <para>
-     This documentation is based on an article published in 
-     Linux Journal Magazine, October 2001, Issue 90.
-   </para>
-  </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
-  <chapter id="intro">
-      <title>Introduction</title>
-  <para>
-      The Linux USB subsystem has grown from supporting only two different
-      types of devices in the 2.2.7 kernel (mice and keyboards), to over 20
-      different types of devices in the 2.4 kernel. Linux currently supports
-      almost all USB class devices (standard types of devices like keyboards,
-      mice, modems, printers and speakers) and an ever-growing number of
-      vendor-specific devices (such as USB to serial converters, digital
-      cameras, Ethernet devices and MP3 players). For a full list of the
-      different USB devices currently supported, see Resources.
-  </para>
-  <para>
-      The remaining kinds of USB devices that do not have support on Linux are
-      almost all vendor-specific devices. Each vendor decides to implement a
-      custom protocol to talk to their device, so a custom driver usually needs
-      to be created. Some vendors are open with their USB protocols and help
-      with the creation of Linux drivers, while others do not publish them, and
-      developers are forced to reverse-engineer. See Resources for some links
-      to handy reverse-engineering tools.
-  </para>
-  <para>
-      Because each different protocol causes a new driver to be created, I have
-      written a generic USB driver skeleton, modelled after the pci-skeleton.c
-      file in the kernel source tree upon which many PCI network drivers have
-      been based. This USB skeleton can be found at drivers/usb/usb-skeleton.c
-      in the kernel source tree. In this article I will walk through the basics
-      of the skeleton driver, explaining the different pieces and what needs to
-      be done to customize it to your specific device.
-  </para>
-  </chapter>
-
-  <chapter id="basics">
-      <title>Linux USB Basics</title>
-  <para>
-      If you are going to write a Linux USB driver, please become familiar with
-      the USB protocol specification. It can be found, along with many other
-      useful documents, at the USB home page (see Resources). An excellent
-      introduction to the Linux USB subsystem can be found at the USB Working
-      Devices List (see Resources). It explains how the Linux USB subsystem is
-      structured and introduces the reader to the concept of USB urbs
-      (USB Request Blocks), which are essential to USB drivers.
-  </para>
-  <para>
-      The first thing a Linux USB driver needs to do is register itself with
-      the Linux USB subsystem, giving it some information about which devices
-      the driver supports and which functions to call when a device supported
-      by the driver is inserted or removed from the system. All of this
-      information is passed to the USB subsystem in the usb_driver structure.
-      The skeleton driver declares a usb_driver as:
-  </para>
-  <programlisting>
-static struct usb_driver skel_driver = {
-        .name        = "skeleton",
-        .probe       = skel_probe,
-        .disconnect  = skel_disconnect,
-        .fops        = &amp;skel_fops,
-        .minor       = USB_SKEL_MINOR_BASE,
-        .id_table    = skel_table,
-};
-  </programlisting>
-  <para>
-      The variable name is a string that describes the driver. It is used in
-      informational messages printed to the system log. The probe and
-      disconnect function pointers are called when a device that matches the
-      information provided in the id_table variable is either seen or removed.
-  </para>
-  <para>
-      The fops and minor variables are optional. Most USB drivers hook into
-      another kernel subsystem, such as the SCSI, network or TTY subsystem.
-      These types of drivers register themselves with the other kernel
-      subsystem, and any user-space interactions are provided through that
-      interface. But for drivers that do not have a matching kernel subsystem,
-      such as MP3 players or scanners, a method of interacting with user space
-      is needed. The USB subsystem provides a way to register a minor device
-      number and a set of file_operations function pointers that enable this
-      user-space interaction. The skeleton driver needs this kind of interface,
-      so it provides a minor starting number and a pointer to its
-      file_operations functions.
-  </para>
-  <para>
-      The USB driver is then registered with a call to usb_register, usually in
-      the driver's init function, as shown here:
-  </para>
-  <programlisting>
-static int __init usb_skel_init(void)
-{
-        int result;
-
-        /* register this driver with the USB subsystem */
-        result = usb_register(&amp;skel_driver);
-        if (result &lt; 0) {
-                err(&quot;usb_register failed for the &quot;__FILE__ &quot;driver.&quot;
-                    &quot;Error number %d&quot;, result);
-                return -1;
-        }
-
-        return 0;
-}
-module_init(usb_skel_init);
-  </programlisting>
-  <para>
-      When the driver is unloaded from the system, it needs to deregister
-      itself with the USB subsystem. This is done with the usb_deregister
-      function:
-  </para>
-  <programlisting>
-static void __exit usb_skel_exit(void)
-{
-        /* deregister this driver with the USB subsystem */
-        usb_deregister(&amp;skel_driver);
-}
-module_exit(usb_skel_exit);
-  </programlisting>
-  <para>
-     To enable the linux-hotplug system to load the driver automatically when
-     the device is plugged in, you need to create a MODULE_DEVICE_TABLE. The
-     following code tells the hotplug scripts that this module supports a
-     single device with a specific vendor and product ID:
-  </para>
-  <programlisting>
-/* table of devices that work with this driver */
-static struct usb_device_id skel_table [] = {
-        { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
-        { }                      /* Terminating entry */
-};
-MODULE_DEVICE_TABLE (usb, skel_table);
-  </programlisting>
-  <para>
-     There are other macros that can be used in describing a usb_device_id for
-     drivers that support a whole class of USB drivers. See usb.h for more
-     information on this.
-  </para>
-  </chapter>
-
-  <chapter id="device">
-      <title>Device operation</title>
-  <para>
-     When a device is plugged into the USB bus that matches the device ID
-     pattern that your driver registered with the USB core, the probe function
-     is called. The usb_device structure, interface number and the interface ID
-     are passed to the function:
-  </para>
-  <programlisting>
-static int skel_probe(struct usb_interface *interface,
-    const struct usb_device_id *id)
-  </programlisting>
-  <para>
-     The driver now needs to verify that this device is actually one that it
-     can accept. If so, it returns 0.
-     If not, or if any error occurs during initialization, an errorcode
-     (such as <literal>-ENOMEM</literal> or <literal>-ENODEV</literal>)
-     is returned from the probe function.
-  </para>
-  <para>
-     In the skeleton driver, we determine what end points are marked as bulk-in
-     and bulk-out. We create buffers to hold the data that will be sent and
-     received from the device, and a USB urb to write data to the device is
-     initialized.
-  </para>
-  <para>
-     Conversely, when the device is removed from the USB bus, the disconnect
-     function is called with the device pointer. The driver needs to clean any
-     private data that has been allocated at this time and to shut down any
-     pending urbs that are in the USB system.
-  </para>
-  <para>
-     Now that the device is plugged into the system and the driver is bound to
-     the device, any of the functions in the file_operations structure that
-     were passed to the USB subsystem will be called from a user program trying
-     to talk to the device. The first function called will be open, as the
-     program tries to open the device for I/O. We increment our private usage
-     count and save a pointer to our internal structure in the file
-     structure. This is done so that future calls to file operations will
-     enable the driver to determine which device the user is addressing.  All
-     of this is done with the following code:
-  </para>
-  <programlisting>
-/* increment our usage count for the module */
-++skel->open_count;
-
-/* save our object in the file's private structure */
-file->private_data = dev;
-  </programlisting>
-  <para>
-     After the open function is called, the read and write functions are called
-     to receive and send data to the device. In the skel_write function, we
-     receive a pointer to some data that the user wants to send to the device
-     and the size of the data. The function determines how much data it can
-     send to the device based on the size of the write urb it has created (this
-     size depends on the size of the bulk out end point that the device has).
-     Then it copies the data from user space to kernel space, points the urb to
-     the data and submits the urb to the USB subsystem.  This can be seen in
-     the following code:
-  </para>
-  <programlisting>
-/* we can only write as much as 1 urb will hold */
-bytes_written = (count > skel->bulk_out_size) ? skel->bulk_out_size : count;
-
-/* copy the data from user space into our urb */
-copy_from_user(skel->write_urb->transfer_buffer, buffer, bytes_written);
-
-/* set up our urb */
-usb_fill_bulk_urb(skel->write_urb,
-                  skel->dev,
-                  usb_sndbulkpipe(skel->dev, skel->bulk_out_endpointAddr),
-                  skel->write_urb->transfer_buffer,
-                  bytes_written,
-                  skel_write_bulk_callback,
-                  skel);
-
-/* send the data out the bulk port */
-result = usb_submit_urb(skel->write_urb);
-if (result) {
-        err(&quot;Failed submitting write urb, error %d&quot;, result);
-}
-  </programlisting>
-  <para>
-     When the write urb is filled up with the proper information using the
-     usb_fill_bulk_urb function, we point the urb's completion callback to call our
-     own skel_write_bulk_callback function. This function is called when the
-     urb is finished by the USB subsystem. The callback function is called in
-     interrupt context, so caution must be taken not to do very much processing
-     at that time. Our implementation of skel_write_bulk_callback merely
-     reports if the urb was completed successfully or not and then returns.
-  </para>
-  <para>
-     The read function works a bit differently from the write function in that
-     we do not use an urb to transfer data from the device to the driver.
-     Instead we call the usb_bulk_msg function, which can be used to send or
-     receive data from a device without having to create urbs and handle
-     urb completion callback functions. We call the usb_bulk_msg function,
-     giving it a buffer into which to place any data received from the device
-     and a timeout value. If the timeout period expires without receiving any
-     data from the device, the function will fail and return an error message.
-     This can be shown with the following code:
-  </para>
-  <programlisting>
-/* do an immediate bulk read to get data from the device */
-retval = usb_bulk_msg (skel->dev,
-                       usb_rcvbulkpipe (skel->dev,
-                       skel->bulk_in_endpointAddr),
-                       skel->bulk_in_buffer,
-                       skel->bulk_in_size,
-                       &amp;count, HZ*10);
-/* if the read was successful, copy the data to user space */
-if (!retval) {
-        if (copy_to_user (buffer, skel->bulk_in_buffer, count))
-                retval = -EFAULT;
-        else
-                retval = count;
-}
-  </programlisting>
-  <para>
-     The usb_bulk_msg function can be very useful for doing single reads or
-     writes to a device; however, if you need to read or write constantly to a
-     device, it is recommended to set up your own urbs and submit them to the
-     USB subsystem.
-  </para>
-  <para>
-     When the user program releases the file handle that it has been using to
-     talk to the device, the release function in the driver is called. In this
-     function we decrement our private usage count and wait for possible
-     pending writes:
-  </para>
-  <programlisting>
-/* decrement our usage count for the device */
---skel->open_count;
-  </programlisting>
-  <para>
-     One of the more difficult problems that USB drivers must be able to handle
-     smoothly is the fact that the USB device may be removed from the system at
-     any point in time, even if a program is currently talking to it. It needs
-     to be able to shut down any current reads and writes and notify the
-     user-space programs that the device is no longer there. The following
-     code (function <function>skel_delete</function>)
-     is an example of how to do this: </para>
-  <programlisting>
-static inline void skel_delete (struct usb_skel *dev)
-{
-    kfree (dev->bulk_in_buffer);
-    if (dev->bulk_out_buffer != NULL)
-        usb_free_coherent (dev->udev, dev->bulk_out_size,
-            dev->bulk_out_buffer,
-            dev->write_urb->transfer_dma);
-    usb_free_urb (dev->write_urb);
-    kfree (dev);
-}
-  </programlisting>
-  <para>
-     If a program currently has an open handle to the device, we reset the flag
-     <literal>device_present</literal>. For
-     every read, write, release and other functions that expect a device to be
-     present, the driver first checks this flag to see if the device is
-     still present. If not, it releases that the device has disappeared, and a
-     -ENODEV error is returned to the user-space program. When the release
-     function is eventually called, it determines if there is no device
-     and if not, it does the cleanup that the skel_disconnect
-     function normally does if there are no open files on the device (see
-     Listing 5).
-  </para>
-  </chapter>
-
-  <chapter id="iso">
-      <title>Isochronous Data</title>
-  <para>
-     This usb-skeleton driver does not have any examples of interrupt or
-     isochronous data being sent to or from the device. Interrupt data is sent
-     almost exactly as bulk data is, with a few minor exceptions.  Isochronous
-     data works differently with continuous streams of data being sent to or
-     from the device. The audio and video camera drivers are very good examples
-     of drivers that handle isochronous data and will be useful if you also
-     need to do this.
-  </para>
-  </chapter>
-  
-  <chapter id="Conclusion">
-      <title>Conclusion</title>
-  <para>
-     Writing Linux USB device drivers is not a difficult task as the
-     usb-skeleton driver shows. This driver, combined with the other current
-     USB drivers, should provide enough examples to help a beginning author
-     create a working driver in a minimal amount of time. The linux-usb-devel
-     mailing list archives also contain a lot of helpful information.
-  </para>
-  </chapter>
-
-  <chapter id="resources">
-      <title>Resources</title>
-  <para>
-     The Linux USB Project: <ulink url="http://www.linux-usb.org">http://www.linux-usb.org/</ulink>
-  </para>
-  <para>
-     Linux Hotplug Project: <ulink url="http://linux-hotplug.sourceforge.net">http://linux-hotplug.sourceforge.net/</ulink>
-  </para>
-  <para>
-     Linux USB Working Devices List: <ulink url="http://www.qbik.ch/usb/devices">http://www.qbik.ch/usb/devices/</ulink>
-  </para>
-  <para>
-     linux-usb-devel Mailing List Archives: <ulink url="http://marc.theaimsgroup.com/?l=linux-usb-devel">http://marc.theaimsgroup.com/?l=linux-usb-devel</ulink>
-  </para>
-  <para>
-     Programming Guide for Linux USB Device Drivers: <ulink url="http://usb.cs.tum.edu/usbdoc">http://usb.cs.tum.edu/usbdoc</ulink>
-  </para>
-  <para>
-     USB Home Page: <ulink url="http://www.usb.org">http://www.usb.org</ulink>
-  </para>
-  </chapter>
-
-</book>

Documentation/EDID/edid.S

@@ -59,9 +59,9 @@
 /* Fixed header pattern */
 header:		.byte	0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00
 
-mfg_id:		.word	swap16(mfgname2id(MFG_LNX1, MFG_LNX2, MFG_LNX3))
+mfg_id:		.hword	swap16(mfgname2id(MFG_LNX1, MFG_LNX2, MFG_LNX3))
 
-prod_code:	.word	0
+prod_code:	.hword	0
 
 /* Serial number. 32 bits, little endian. */
 serial_number:	.long	SERIAL
@@ -177,7 +177,7 @@ std_vres:	.byte	(XY_RATIO<<6)+VFREQ-60
 
 descriptor1:
 /* Pixel clock in 10 kHz units. (0.-655.35 MHz, little-endian) */
-clock:		.word	CLOCK/10
+clock:		.hword	CLOCK/10
 
 /* Horizontal active pixels 8 lsbits (0-4095) */
 x_act_lsb:	.byte	XPIX&0xff

Documentation/PCI/00-INDEX

@@ -12,3 +12,13 @@ pci.txt
 	- info on the PCI subsystem for device driver authors
 pcieaer-howto.txt
 	- the PCI Express Advanced Error Reporting Driver Guide HOWTO
+endpoint/pci-endpoint.txt
+	- guide to add endpoint controller driver and endpoint function driver.
+endpoint/pci-endpoint-cfs.txt
+	- guide to use configfs to configure the PCI endpoint function.
+endpoint/pci-test-function.txt
+	- specification of *PCI test* function device.
+endpoint/pci-test-howto.txt
+	- userguide for PCI endpoint test function.
+endpoint/function/binding/
+	- binding documentation for PCI endpoint function

Documentation/PCI/endpoint/function/binding/pci-test.txt

+PCI TEST ENDPOINT FUNCTION
+
+name: Should be "pci_epf_test" to bind to the pci_epf_test driver.
+
+Configurable Fields:
+vendorid	 : should be 0x104c
+deviceid	 : should be 0xb500 for DRA74x and 0xb501 for DRA72x
+revid		 : don't care
+progif_code	 : don't care
+subclass_code	 : don't care
+baseclass_code	 : should be 0xff
+cache_line_size	 : don't care
+subsys_vendor_id : don't care
+subsys_id	 : don't care
+interrupt_pin	 : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
+msi_interrupts	 : Should be 1 to 32 depending on the number of MSI interrupts
+		   to test

Documentation/PCI/endpoint/pci-endpoint-cfs.txt

+                   CONFIGURING PCI ENDPOINT USING CONFIGFS
+                    Kishon Vijay Abraham I <kishon@ti.com>
+
+The PCI Endpoint Core exposes configfs entry (pci_ep) to configure the
+PCI endpoint function and to bind the endpoint function
+with the endpoint controller. (For introducing other mechanisms to
+configure the PCI Endpoint Function refer to [1]).
+
+*) Mounting configfs
+
+The PCI Endpoint Core layer creates pci_ep directory in the mounted configfs
+directory. configfs can be mounted using the following command.
+
+	mount -t configfs none /sys/kernel/config
+
+*) Directory Structure
+
+The pci_ep configfs has two directories at its root: controllers and
+functions. Every EPC device present in the system will have an entry in
+the *controllers* directory and and every EPF driver present in the system
+will have an entry in the *functions* directory.
+
+/sys/kernel/config/pci_ep/
+	.. controllers/
+	.. functions/
+
+*) Creating EPF Device
+
+Every registered EPF driver will be listed in controllers directory. The
+entries corresponding to EPF driver will be created by the EPF core.
+
+/sys/kernel/config/pci_ep/functions/
+	.. <EPF Driver1>/
+		... <EPF Device 11>/
+		... <EPF Device 21>/
+	.. <EPF Driver2>/
+		... <EPF Device 12>/
+		... <EPF Device 22>/
+
+In order to create a <EPF device> of the type probed by <EPF Driver>, the
+user has to create a directory inside <EPF DriverN>.
+
+Every <EPF device> directory consists of the following entries that can be
+used to configure the standard configuration header of the endpoint function.
+(These entries are created by the framework when any new <EPF Device> is
+created)
+
+	.. <EPF Driver1>/
+		... <EPF Device 11>/
+			... vendorid
+			... deviceid
+			... revid
+			... progif_code
+			... subclass_code
+			... baseclass_code
+			... cache_line_size
+			... subsys_vendor_id
+			... subsys_id
+			... interrupt_pin
+
+*) EPC Device
+
+Every registered EPC device will be listed in controllers directory. The
+entries corresponding to EPC device will be created by the EPC core.
+
+/sys/kernel/config/pci_ep/controllers/
+	.. <EPC Device1>/
+		... <Symlink EPF Device11>/
+		... <Symlink EPF Device12>/
+		... start
+	.. <EPC Device2>/
+		... <Symlink EPF Device21>/
+		... <Symlink EPF Device22>/
+		... start
+
+The <EPC Device> directory will have a list of symbolic links to
+<EPF Device>. These symbolic links should be created by the user to
+represent the functions present in the endpoint device.
+
+The <EPC Device> directory will also have a *start* field. Once
+"1" is written to this field, the endpoint device will be ready to
+establish the link with the host. This is usually done after
+all the EPF devices are created and linked with the EPC device.
+
+
+			 | controllers/
+				| <Directory: EPC name>/
+					| <Symbolic Link: Function>
+					| start
+			 | functions/
+				| <Directory: EPF driver>/
+					| <Directory: EPF device>/
+						| vendorid
+						| deviceid
+						| revid
+						| progif_code
+						| subclass_code
+						| baseclass_code
+						| cache_line_size
+						| subsys_vendor_id
+						| subsys_id
+						| interrupt_pin
+						| function
+
+[1] -> Documentation/PCI/endpoint/pci-endpoint.txt

Documentation/PCI/endpoint/pci-endpoint.txt

+			    PCI ENDPOINT FRAMEWORK
+		    Kishon Vijay Abraham I <kishon@ti.com>
+
+This document is a guide to use the PCI Endpoint Framework in order to create
+endpoint controller driver, endpoint function driver, and using configfs
+interface to bind the function driver to the controller driver.
+
+1. Introduction
+
+Linux has a comprehensive PCI subsystem to support PCI controllers that
+operates in Root Complex mode. The subsystem has capability to scan PCI bus,
+assign memory resources and IRQ resources, load PCI driver (based on
+vendor ID, device ID), support other services like hot-plug, power management,
+advanced error reporting and virtual channels.
+
+However the PCI controller IP integrated in some SoCs is capable of operating
+either in Root Complex mode or Endpoint mode. PCI Endpoint Framework will
+add endpoint mode support in Linux. This will help to run Linux in an
+EP system which can have a wide variety of use cases from testing or
+validation, co-processor accelerator, etc.
+
+2. PCI Endpoint Core
+
+The PCI Endpoint Core layer comprises 3 components: the Endpoint Controller
+library, the Endpoint Function library, and the configfs layer to bind the
+endpoint function with the endpoint controller.
+
+2.1 PCI Endpoint Controller(EPC) Library
+
+The EPC library provides APIs to be used by the controller that can operate
+in endpoint mode. It also provides APIs to be used by function driver/library
+in order to implement a particular endpoint function.
+
+2.1.1 APIs for the PCI controller Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI controller driver.
+
+*) devm_pci_epc_create()/pci_epc_create()
+
+   The PCI controller driver should implement the following ops:
+	 * write_header: ops to populate configuration space header
+	 * set_bar: ops to configure the BAR
+	 * clear_bar: ops to reset the BAR
+	 * alloc_addr_space: ops to allocate in PCI controller address space
+	 * free_addr_space: ops to free the allocated address space
+	 * raise_irq: ops to raise a legacy or MSI interrupt
+	 * start: ops to start the PCI link
+	 * stop: ops to stop the PCI link
+
+   The PCI controller driver can then create a new EPC device by invoking
+   devm_pci_epc_create()/pci_epc_create().
+
+*) devm_pci_epc_destroy()/pci_epc_destroy()
+
+   The PCI controller driver can destroy the EPC device created by either
+   devm_pci_epc_create() or pci_epc_create() using devm_pci_epc_destroy() or
+   pci_epc_destroy().
+
+*) pci_epc_linkup()
+
+   In order to notify all the function devices that the EPC device to which
+   they are linked has established a link with the host, the PCI controller
+   driver should invoke pci_epc_linkup().
+
+*) pci_epc_mem_init()
+
+   Initialize the pci_epc_mem structure used for allocating EPC addr space.
+
+*) pci_epc_mem_exit()
+
+   Cleanup the pci_epc_mem structure allocated during pci_epc_mem_init().
+
+2.1.2 APIs for the PCI Endpoint Function Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint function driver.
+
+*) pci_epc_write_header()
+
+   The PCI endpoint function driver should use pci_epc_write_header() to
+   write the standard configuration header to the endpoint controller.
+
+*) pci_epc_set_bar()
+
+   The PCI endpoint function driver should use pci_epc_set_bar() to configure
+   the Base Address Register in order for the host to assign PCI addr space.
+   Register space of the function driver is usually configured
+   using this API.
+
+*) pci_epc_clear_bar()
+
+   The PCI endpoint function driver should use pci_epc_clear_bar() to reset
+   the BAR.
+
+*) pci_epc_raise_irq()
+
+   The PCI endpoint function driver should use pci_epc_raise_irq() to raise
+   Legacy Interrupt or MSI Interrupt.
+
+*) pci_epc_mem_alloc_addr()
+
+   The PCI endpoint function driver should use pci_epc_mem_alloc_addr(), to
+   allocate memory address from EPC addr space which is required to access
+   RC's buffer
+
+*) pci_epc_mem_free_addr()
+
+   The PCI endpoint function driver should use pci_epc_mem_free_addr() to
+   free the memory space allocated using pci_epc_mem_alloc_addr().
+
+2.1.3 Other APIs
+
+There are other APIs provided by the EPC library. These are used for binding
+the EPF device with EPC device. pci-ep-cfs.c can be used as reference for
+using these APIs.
+
+*) pci_epc_get()
+
+   Get a reference to the PCI endpoint controller based on the device name of
+   the controller.
+
+*) pci_epc_put()
+
+   Release the reference to the PCI endpoint controller obtained using
+   pci_epc_get()
+
+*) pci_epc_add_epf()
+
+   Add a PCI endpoint function to a PCI endpoint controller. A PCIe device
+   can have up to 8 functions according to the specification.
+
+*) pci_epc_remove_epf()
+
+   Remove the PCI endpoint function from PCI endpoint controller.
+
+*) pci_epc_start()
+
+   The PCI endpoint function driver should invoke pci_epc_start() once it
+   has configured the endpoint function and wants to start the PCI link.
+
+*) pci_epc_stop()
+
+   The PCI endpoint function driver should invoke pci_epc_stop() to stop
+   the PCI LINK.
+
+2.2 PCI Endpoint Function(EPF) Library
+
+The EPF library provides APIs to be used by the function driver and the EPC
+library to provide endpoint mode functionality.
+
+2.2.1 APIs for the PCI Endpoint Function Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint function driver.
+
+*) pci_epf_register_driver()
+
+   The PCI Endpoint Function driver should implement the following ops:
+	 * bind: ops to perform when a EPC device has been bound to EPF device
+	 * unbind: ops to perform when a binding has been lost between a EPC
+	   device and EPF device
+	 * linkup: ops to perform when the EPC device has established a
+	   connection with a host system
+
+  The PCI Function driver can then register the PCI EPF driver by using
+  pci_epf_register_driver().
+
+*) pci_epf_unregister_driver()
+
+  The PCI Function driver can unregister the PCI EPF driver by using
+  pci_epf_unregister_driver().
+
+*) pci_epf_alloc_space()
+
+  The PCI Function driver can allocate space for a particular BAR using
+  pci_epf_alloc_space().
+
+*) pci_epf_free_space()
+
+  The PCI Function driver can free the allocated space
+  (using pci_epf_alloc_space) by invoking pci_epf_free_space().
+
+2.2.2 APIs for the PCI Endpoint Controller Library
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint controller library.
+
+*) pci_epf_linkup()
+
+   The PCI endpoint controller library invokes pci_epf_linkup() when the
+   EPC device has established the connection to the host.
+
+2.2.2 Other APIs
+There are other APIs provided by the EPF library. These are used to notify
+the function driver when the EPF device is bound to the EPC device.
+pci-ep-cfs.c can be used as reference for using these APIs.
+
+*) pci_epf_create()
+
+   Create a new PCI EPF device by passing the name of the PCI EPF device.
+   This name will be used to bind the the EPF device to a EPF driver.
+
+*) pci_epf_destroy()
+
+   Destroy the created PCI EPF device.
+
+*) pci_epf_bind()
+
+   pci_epf_bind() should be invoked when the EPF device has been bound to
+   a EPC device.
+
+*) pci_epf_unbind()
+
+   pci_epf_unbind() should be invoked when the binding between EPC device
+   and EPF device is lost.

Documentation/PCI/endpoint/pci-test-function.txt

+				PCI TEST
+		    Kishon Vijay Abraham I <kishon@ti.com>
+
+Traditionally PCI RC has always been validated by using standard
+PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
+However with the addition of EP-core in linux kernel, it is possible
+to configure a PCI controller that can operate in EP mode to work as
+a test device.
+
+The PCI endpoint test device is a virtual device (defined in software)
+used to test the endpoint functionality and serve as a sample driver
+for other PCI endpoint devices (to use the EP framework).
+
+The PCI endpoint test device has the following registers:
+
+	1) PCI_ENDPOINT_TEST_MAGIC
+	2) PCI_ENDPOINT_TEST_COMMAND
+	3) PCI_ENDPOINT_TEST_STATUS
+	4) PCI_ENDPOINT_TEST_SRC_ADDR
+	5) PCI_ENDPOINT_TEST_DST_ADDR
+	6) PCI_ENDPOINT_TEST_SIZE
+	7) PCI_ENDPOINT_TEST_CHECKSUM
+
+*) PCI_ENDPOINT_TEST_MAGIC
+
+This register will be used to test BAR0. A known pattern will be written
+and read back from MAGIC register to verify BAR0.
+
+*) PCI_ENDPOINT_TEST_COMMAND:
+
+This register will be used by the host driver to indicate the function
+that the endpoint device must perform.
+
+Bitfield Description:
+  Bit 0		: raise legacy IRQ
+  Bit 1		: raise MSI IRQ
+  Bit 2 - 7	: MSI interrupt number
+  Bit 8		: read command (read data from RC buffer)
+  Bit 9		: write command (write data to RC buffer)
+  Bit 10	: copy command (copy data from one RC buffer to another
+		  RC buffer)
+
+*) PCI_ENDPOINT_TEST_STATUS
+
+This register reflects the status of the PCI endpoint device.
+
+Bitfield Description:
+  Bit 0		: read success
+  Bit 1		: read fail
+  Bit 2		: write success
+  Bit 3		: write fail
+  Bit 4		: copy success
+  Bit 5		: copy fail
+  Bit 6		: IRQ raised
+  Bit 7		: source address is invalid
+  Bit 8		: destination address is invalid
+
+*) PCI_ENDPOINT_TEST_SRC_ADDR
+
+This register contains the source address (RC buffer address) for the
+COPY/READ command.
+
+*) PCI_ENDPOINT_TEST_DST_ADDR
+
+This register contains the destination address (RC buffer address) for
+the COPY/WRITE command.

Documentation/PCI/endpoint/pci-test-howto.txt

+			    PCI TEST USERGUIDE
+		    Kishon Vijay Abraham I <kishon@ti.com>
+
+This document is a guide to help users use pci-epf-test function driver
+and pci_endpoint_test host driver for testing PCI. The list of steps to
+be followed in the host side and EP side is given below.
+
+1. Endpoint Device
+
+1.1 Endpoint Controller Devices
+
+To find the list of endpoint controller devices in the system:
+
+	# ls /sys/class/pci_epc/
+	  51000000.pcie_ep
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+	# ls /sys/kernel/config/pci_ep/controllers
+	  51000000.pcie_ep
+
+1.2 Endpoint Function Drivers
+
+To find the list of endpoint function drivers in the system:
+
+	# ls /sys/bus/pci-epf/drivers
+	  pci_epf_test
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+	# ls /sys/kernel/config/pci_ep/functions
+	  pci_epf_test
+
+1.3 Creating pci-epf-test Device
+
+PCI endpoint function device can be created using the configfs. To create
+pci-epf-test device, the following commands can be used
+
+	# mount -t configfs none /sys/kernel/config
+	# cd /sys/kernel/config/pci_ep/
+	# mkdir functions/pci_epf_test/func1
+
+The "mkdir func1" above creates the pci-epf-test function device that will
+be probed by pci_epf_test driver.
+
+The PCI endpoint framework populates the directory with the following
+configurable fields.
+
+	# ls functions/pci_epf_test/func1
+	  baseclass_code	interrupt_pin	revid		subsys_vendor_id
+	  cache_line_size	msi_interrupts	subclass_code	vendorid
+	  deviceid          	progif_code	subsys_id
+
+The PCI endpoint function driver populates these entries with default values
+when the device is bound to the driver. The pci-epf-test driver populates
+vendorid with 0xffff and interrupt_pin with 0x0001
+
+	# cat functions/pci_epf_test/func1/vendorid
+	  0xffff
+	# cat functions/pci_epf_test/func1/interrupt_pin
+	  0x0001
+
+1.4 Configuring pci-epf-test Device
+
+The user can configure the pci-epf-test device using configfs entry. In order
+to change the vendorid and the number of MSI interrupts used by the function
+device, the following commands can be used.
+
+	# echo 0x104c > functions/pci_epf_test/func1/vendorid
+	# echo 0xb500 > functions/pci_epf_test/func1/deviceid
+	# echo 16 > functions/pci_epf_test/func1/msi_interrupts
+
+1.5 Binding pci-epf-test Device to EP Controller
+
+In order for the endpoint function device to be useful, it has to be bound to
+a PCI endpoint controller driver. Use the configfs to bind the function
+device to one of the controller driver present in the system.
+
+	# ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/
+
+Once the above step is completed, the PCI endpoint is ready to establish a link
+with the host.
+
+1.6 Start the Link
+
+In order for the endpoint device to establish a link with the host, the _start_
+field should be populated with '1'.
+
+	# echo 1 > controllers/51000000.pcie_ep/start
+
+2. RootComplex Device
+
+2.1 lspci Output
+
+Note that the devices listed here correspond to the value populated in 1.4 above
+
+	00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01)
+	01:00.0 Unassigned class [ff00]: Texas Instruments Device b500
+
+2.2 Using Endpoint Test function Device
+
+pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
+tests. Before pcitest.sh can be used pcitest.c should be compiled using the
+following commands.
+
+	cd <kernel-dir>
+	make headers_install ARCH=arm
+	arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest
+	cp pcitest  <rootfs>/usr/sbin/
+	cp tools/pci/pcitest.sh <rootfs>
+
+2.2.1 pcitest.sh Output
+	# ./pcitest.sh
+	BAR tests
+
+	BAR0:           OKAY
+	BAR1:           OKAY
+	BAR2:           OKAY
+	BAR3:           OKAY
+	BAR4:           NOT OKAY
+	BAR5:           NOT OKAY
+
+	Interrupt tests
+
+	LEGACY IRQ:     NOT OKAY
+	MSI1:           OKAY
+	MSI2:           OKAY
+	MSI3:           OKAY
+	MSI4:           OKAY
+	MSI5:           OKAY
+	MSI6:           OKAY
+	MSI7:           OKAY
+	MSI8:           OKAY
+	MSI9:           OKAY
+	MSI10:          OKAY
+	MSI11:          OKAY
+	MSI12:          OKAY
+	MSI13:          OKAY
+	MSI14:          OKAY
+	MSI15:          OKAY
+	MSI16:          OKAY
+	MSI17:          NOT OKAY
+	MSI18:          NOT OKAY
+	MSI19:          NOT OKAY
+	MSI20:          NOT OKAY
+	MSI21:          NOT OKAY
+	MSI22:          NOT OKAY
+	MSI23:          NOT OKAY
+	MSI24:          NOT OKAY
+	MSI25:          NOT OKAY
+	MSI26:          NOT OKAY
+	MSI27:          NOT OKAY
+	MSI28:          NOT OKAY
+	MSI29:          NOT OKAY
+	MSI30:          NOT OKAY
+	MSI31:          NOT OKAY
+	MSI32:          NOT OKAY
+
+	Read Tests
+
+	READ (      1 bytes):           OKAY
+	READ (   1024 bytes):           OKAY
+	READ (   1025 bytes):           OKAY
+	READ (1024000 bytes):           OKAY
+	READ (1024001 bytes):           OKAY
+
+	Write Tests
+
+	WRITE (      1 bytes):          OKAY
+	WRITE (   1024 bytes):          OKAY
+	WRITE (   1025 bytes):          OKAY
+	WRITE (1024000 bytes):          OKAY
+	WRITE (1024001 bytes):          OKAY
+
+	Copy Tests
+
+	COPY (      1 bytes):           OKAY
+	COPY (   1024 bytes):           OKAY
+	COPY (   1025 bytes):           OKAY
+	COPY (1024000 bytes):           OKAY
+	COPY (1024001 bytes):           OKAY

Documentation/PCI/pci-error-recovery.txt

@@ -11,7 +11,7 @@
 
 Many PCI bus controllers are able to detect a variety of hardware
 PCI errors on the bus, such as parity errors on the data and address
-busses, as well as SERR and PERR errors.  Some of the more advanced
+buses, as well as SERR and PERR errors.  Some of the more advanced
 chipsets are able to deal with these errors; these include PCI-E chipsets,
 and the PCI-host bridges found on IBM Power4, Power5 and Power6-based
 pSeries boxes. A typical action taken is to disconnect the affected device,
@@ -173,7 +173,7 @@ is STEP 6 (Permanent Failure).
 >>> a value of 0xff on read, and writes will be dropped. If more than
 >>> EEH_MAX_FAILS I/O's are attempted to a frozen adapter, EEH
 >>> assumes that the device driver has gone into an infinite loop
->>> and prints an error to syslog.  A reboot is then required to 
+>>> and prints an error to syslog.  A reboot is then required to
 >>> get the device working again.
 
 STEP 2: MMIO Enabled
@@ -231,14 +231,14 @@ proceeds to STEP 4 (Slot Reset)
 STEP 3: Link Reset
 ------------------
 The platform resets the link.  This is a PCI-Express specific step
-and is done whenever a non-fatal error has been detected that can be
+and is done whenever a fatal error has been detected that can be
 "solved" by resetting the link.
 
 STEP 4: Slot Reset
 ------------------
 
 In response to a return value of PCI_ERS_RESULT_NEED_RESET, the
-the platform will perform a slot reset on the requesting PCI device(s). 
+the platform will perform a slot reset on the requesting PCI device(s).
 The actual steps taken by a platform to perform a slot reset
 will be platform-dependent. Upon completion of slot reset, the
 platform will call the device slot_reset() callback.
@@ -258,7 +258,7 @@ configuration registers to initialize to their default conditions.
 
 For most PCI devices, a soft reset will be sufficient for recovery.
 Optional fundamental reset is provided to support a limited number
-of PCI Express PCI devices  for which a soft reset is not sufficient
+of PCI Express devices for which a soft reset is not sufficient
 for recovery.
 
 If the platform supports PCI hotplug, then the reset might be
@@ -303,7 +303,7 @@ driver performs device init only from PCI function 0:
 		Same as above.
 
 Drivers for PCI Express cards that require a fundamental reset must
-set the needs_freset bit in the pci_dev structure in their probe function.  
+set the needs_freset bit in the pci_dev structure in their probe function.
 For example, the QLogic qla2xxx driver sets the needs_freset bit for certain
 PCI card types:
 

Documentation/PCI/pci-iov-howto.txt

@@ -68,6 +68,18 @@ To disable SR-IOV capability:
 	echo  0 > \
         /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_numvfs
 
+To enable auto probing VFs by a compatible driver on the host, run
+command below before enabling SR-IOV capabilities. This is the
+default behavior.
+	echo 1 > \
+        /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe
+
+To disable auto probing VFs by a compatible driver on the host, run
+command below before enabling SR-IOV capabilities. Updating this
+entry will not affect VFs which are already probed.
+	echo  0 > \
+        /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe
+
 3.2 Usage example
 
 Following piece of code illustrates the usage of the SR-IOV API.

Documentation/RCU/00-INDEX

@@ -17,7 +17,7 @@ rcu_dereference.txt
 rcubarrier.txt
 	- RCU and Unloadable Modules
 rculist_nulls.txt
-	- RCU list primitives for use with SLAB_DESTROY_BY_RCU
+	- RCU list primitives for use with SLAB_TYPESAFE_BY_RCU
 rcuref.txt
 	- Reference-count design for elements of lists/arrays protected by RCU
 rcu.txt

Documentation/RCU/Design/Data-Structures/Data-Structures.html

@@ -19,6 +19,8 @@ to each other.
 	The <tt>rcu_state</tt> Structure</a>
 <li>	<a href="#The rcu_node Structure">
 	The <tt>rcu_node</tt> Structure</a>
+<li>	<a href="#The rcu_segcblist Structure">
+	The <tt>rcu_segcblist</tt> Structure</a>
 <li>	<a href="#The rcu_data Structure">
 	The <tt>rcu_data</tt> Structure</a>
 <li>	<a href="#The rcu_dynticks Structure">
@@ -841,6 +843,134 @@ for lockdep lock-class names.
 Finally, lines&nbsp;64-66 produce an error if the maximum number of
 CPUs is too large for the specified fanout.
 
+<h3><a name="The rcu_segcblist Structure">
+The <tt>rcu_segcblist</tt> Structure</a></h3>
+
+The <tt>rcu_segcblist</tt> structure maintains a segmented list of
+callbacks as follows:
+
+<pre>
+ 1 #define RCU_DONE_TAIL        0
+ 2 #define RCU_WAIT_TAIL        1
+ 3 #define RCU_NEXT_READY_TAIL  2
+ 4 #define RCU_NEXT_TAIL        3
+ 5 #define RCU_CBLIST_NSEGS     4
+ 6
+ 7 struct rcu_segcblist {
+ 8   struct rcu_head *head;
+ 9   struct rcu_head **tails[RCU_CBLIST_NSEGS];
+10   unsigned long gp_seq[RCU_CBLIST_NSEGS];
+11   long len;
+12   long len_lazy;
+13 };
+</pre>
+
+<p>
+The segments are as follows:
+
+<ol>
+<li>	<tt>RCU_DONE_TAIL</tt>: Callbacks whose grace periods have elapsed.
+	These callbacks are ready to be invoked.
+<li>	<tt>RCU_WAIT_TAIL</tt>: Callbacks that are waiting for the
+	current grace period.
+	Note that different CPUs can have different ideas about which
+	grace period is current, hence the <tt>-&gt;gp_seq</tt> field.
+<li>	<tt>RCU_NEXT_READY_TAIL</tt>: Callbacks waiting for the next
+	grace period to start.
+<li>	<tt>RCU_NEXT_TAIL</tt>: Callbacks that have not yet been
+	associated with a grace period.
+</ol>
+
+<p>
+The <tt>-&gt;head</tt> pointer references the first callback or
+is <tt>NULL</tt> if the list contains no callbacks (which is
+<i>not</i> the same as being empty).
+Each element of the <tt>-&gt;tails[]</tt> array references the
+<tt>-&gt;next</tt> pointer of the last callback in the corresponding
+segment of the list, or the list's <tt>-&gt;head</tt> pointer if
+that segment and all previous segments are empty.
+If the corresponding segment is empty but some previous segment is
+not empty, then the array element is identical to its predecessor.
+Older callbacks are closer to the head of the list, and new callbacks
+are added at the tail.
+This relationship between the <tt>-&gt;head</tt> pointer, the
+<tt>-&gt;tails[]</tt> array, and the callbacks is shown in this
+diagram:
+
+</p><p><img src="nxtlist.svg" alt="nxtlist.svg" width="40%">
+
+</p><p>In this figure, the <tt>-&gt;head</tt> pointer references the
+first
+RCU callback in the list.
+The <tt>-&gt;tails[RCU_DONE_TAIL]</tt> array element references
+the <tt>-&gt;head</tt> pointer itself, indicating that none
+of the callbacks is ready to invoke.
+The <tt>-&gt;tails[RCU_WAIT_TAIL]</tt> array element references callback
+CB&nbsp;2's <tt>-&gt;next</tt> pointer, which indicates that
+CB&nbsp;1 and CB&nbsp;2 are both waiting on the current grace period,
+give or take possible disagreements about exactly which grace period
+is the current one.
+The <tt>-&gt;tails[RCU_NEXT_READY_TAIL]</tt> array element
+references the same RCU callback that <tt>-&gt;tails[RCU_WAIT_TAIL]</tt>
+does, which indicates that there are no callbacks waiting on the next
+RCU grace period.
+The <tt>-&gt;tails[RCU_NEXT_TAIL]</tt> array element references
+CB&nbsp;4's <tt>-&gt;next</tt> pointer, indicating that all the
+remaining RCU callbacks have not yet been assigned to an RCU grace
+period.
+Note that the <tt>-&gt;tails[RCU_NEXT_TAIL]</tt> array element
+always references the last RCU callback's <tt>-&gt;next</tt> pointer
+unless the callback list is empty, in which case it references
+the <tt>-&gt;head</tt> pointer.
+
+<p>
+There is one additional important special case for the
+<tt>-&gt;tails[RCU_NEXT_TAIL]</tt> array element: It can be <tt>NULL</tt>
+when this list is <i>disabled</i>.
+Lists are disabled when the corresponding CPU is offline or when
+the corresponding CPU's callbacks are offloaded to a kthread,
+both of which are described elsewhere.
+
+</p><p>CPUs advance their callbacks from the
+<tt>RCU_NEXT_TAIL</tt> to the <tt>RCU_NEXT_READY_TAIL</tt> to the
+<tt>RCU_WAIT_TAIL</tt> to the <tt>RCU_DONE_TAIL</tt> list segments
+as grace periods advance.
+
+</p><p>The <tt>-&gt;gp_seq[]</tt> array records grace-period
+numbers corresponding to the list segments.
+This is what allows different CPUs to have different ideas as to
+which is the current grace period while still avoiding premature
+invocation of their callbacks.
+In particular, this allows CPUs that go idle for extended periods
+to determine which of their callbacks are ready to be invoked after
+reawakening.
+
+</p><p>The <tt>-&gt;len</tt> counter contains the number of
+callbacks in <tt>-&gt;head</tt>, and the
+<tt>-&gt;len_lazy</tt> contains the number of those callbacks that
+are known to only free memory, and whose invocation can therefore
+be safely deferred.
+
+<p><b>Important note</b>: It is the <tt>-&gt;len</tt> field that
+determines whether or not there are callbacks associated with
+this <tt>rcu_segcblist</tt> structure, <i>not</i> the <tt>-&gt;head</tt>
+pointer.
+The reason for this is that all the ready-to-invoke callbacks
+(that is, those in the <tt>RCU_DONE_TAIL</tt> segment) are extracted
+all at once at callback-invocation time.
+If callback invocation must be postponed, for example, because a
+high-priority process just woke up on this CPU, then the remaining
+callbacks are placed back on the <tt>RCU_DONE_TAIL</tt> segment.
+Either way, the <tt>-&gt;len</tt> and <tt>-&gt;len_lazy</tt> counts
+are adjusted after the corresponding callbacks have been invoked, and so
+again it is the <tt>-&gt;len</tt> count that accurately reflects whether
+or not there are callbacks associated with this <tt>rcu_segcblist</tt>
+structure.
+Of course, off-CPU sampling of the <tt>-&gt;len</tt> count requires
+the use of appropriate synchronization, for example, memory barriers.
+This synchronization can be a bit subtle, particularly in the case
+of <tt>rcu_barrier()</tt>.
+
 <h3><a name="The rcu_data Structure">
 The <tt>rcu_data</tt> Structure</a></h3>
 
@@ -983,62 +1113,18 @@ choice.
 as follows:
 
 <pre>
- 1 struct rcu_head *nxtlist;
- 2 struct rcu_head **nxttail[RCU_NEXT_SIZE];
- 3 unsigned long nxtcompleted[RCU_NEXT_SIZE];
- 4 long qlen_lazy;
- 5 long qlen;
- 6 long qlen_last_fqs_check;
+ 1 struct rcu_segcblist cblist;
+ 2 long qlen_last_fqs_check;
+ 3 unsigned long n_cbs_invoked;
+ 4 unsigned long n_nocbs_invoked;
+ 5 unsigned long n_cbs_orphaned;
+ 6 unsigned long n_cbs_adopted;
  7 unsigned long n_force_qs_snap;
- 8 unsigned long n_cbs_invoked;
- 9 unsigned long n_cbs_orphaned;
-10 unsigned long n_cbs_adopted;
-11 long blimit;
+ 8 long blimit;
 </pre>
 
-<p>The <tt>-&gt;nxtlist</tt> pointer and the
-<tt>-&gt;nxttail[]</tt> array form a four-segment list with
-older callbacks near the head and newer ones near the tail.
-Each segment contains callbacks with the corresponding relationship
-to the current grace period.
-The pointer out of the end of each of the four segments is referenced
-by the element of the <tt>-&gt;nxttail[]</tt> array indexed by
-<tt>RCU_DONE_TAIL</tt> (for callbacks handled by a prior grace period),
-<tt>RCU_WAIT_TAIL</tt> (for callbacks waiting on the current grace period),
-<tt>RCU_NEXT_READY_TAIL</tt> (for callbacks that will wait on the next
-grace period), and
-<tt>RCU_NEXT_TAIL</tt> (for callbacks that are not yet associated
-with a specific grace period)
-respectively, as shown in the following figure.
-
-</p><p><img src="nxtlist.svg" alt="nxtlist.svg" width="40%">
-
-</p><p>In this figure, the <tt>-&gt;nxtlist</tt> pointer references the
-first
-RCU callback in the list.
-The <tt>-&gt;nxttail[RCU_DONE_TAIL]</tt> array element references
-the <tt>-&gt;nxtlist</tt> pointer itself, indicating that none
-of the callbacks is ready to invoke.
-The <tt>-&gt;nxttail[RCU_WAIT_TAIL]</tt> array element references callback
-CB&nbsp;2's <tt>-&gt;next</tt> pointer, which indicates that
-CB&nbsp;1 and CB&nbsp;2 are both waiting on the current grace period.
-The <tt>-&gt;nxttail[RCU_NEXT_READY_TAIL]</tt> array element
-references the same RCU callback that <tt>-&gt;nxttail[RCU_WAIT_TAIL]</tt>
-does, which indicates that there are no callbacks waiting on the next
-RCU grace period.
-The <tt>-&gt;nxttail[RCU_NEXT_TAIL]</tt> array element references
-CB&nbsp;4's <tt>-&gt;next</tt> pointer, indicating that all the
-remaining RCU callbacks have not yet been assigned to an RCU grace
-period.
-Note that the <tt>-&gt;nxttail[RCU_NEXT_TAIL]</tt> array element
-always references the last RCU callback's <tt>-&gt;next</tt> pointer
-unless the callback list is empty, in which case it references
-the <tt>-&gt;nxtlist</tt> pointer.
-
-</p><p>CPUs advance their callbacks from the
-<tt>RCU_NEXT_TAIL</tt> to the <tt>RCU_NEXT_READY_TAIL</tt> to the
-<tt>RCU_WAIT_TAIL</tt> to the <tt>RCU_DONE_TAIL</tt> list segments
-as grace periods advance.
+<p>The <tt>-&gt;cblist</tt> structure is the segmented callback list
+described earlier.
 The CPU advances the callbacks in its <tt>rcu_data</tt> structure
 whenever it notices that another RCU grace period has completed.
 The CPU detects the completion of an RCU grace period by noticing
@@ -1049,16 +1135,7 @@ Recall that each <tt>rcu_node</tt> structure's
 <tt>-&gt;completed</tt> field is updated at the end of each
 grace period.
 
-</p><p>The <tt>-&gt;nxtcompleted[]</tt> array records grace-period
-numbers corresponding to the list segments.
-This allows CPUs that go idle for extended periods to determine
-which of their callbacks are ready to be invoked after reawakening.
-
-</p><p>The <tt>-&gt;qlen</tt> counter contains the number of
-callbacks in <tt>-&gt;nxtlist</tt>, and the
-<tt>-&gt;qlen_lazy</tt> contains the number of those callbacks that
-are known to only free memory, and whose invocation can therefore
-be safely deferred.
+<p>
 The <tt>-&gt;qlen_last_fqs_check</tt> and
 <tt>-&gt;n_force_qs_snap</tt> coordinate the forcing of quiescent
 states from <tt>call_rcu()</tt> and friends when callback
@@ -1069,6 +1146,10 @@ lists grow excessively long.
 fields count the number of callbacks invoked,
 sent to other CPUs when this CPU goes offline,
 and received from other CPUs when those other CPUs go offline.
+The <tt>-&gt;n_nocbs_invoked</tt> is used when the CPU's callbacks
+are offloaded to a kthread.
+
+<p>
 Finally, the <tt>-&gt;blimit</tt> counter is the maximum number of
 RCU callbacks that may be invoked at a given time.
 
@@ -1104,6 +1185,9 @@ Its fields are as follows:
   1   int dynticks_nesting;
   2   int dynticks_nmi_nesting;
   3   atomic_t dynticks;
+  4   bool rcu_need_heavy_qs;
+  5   unsigned long rcu_qs_ctr;
+  6   bool rcu_urgent_qs;
 </pre>
 
 <p>The <tt>-&gt;dynticks_nesting</tt> field counts the
@@ -1117,11 +1201,32 @@ NMIs are counted by the <tt>-&gt;dynticks_nmi_nesting</tt>
 field, except that NMIs that interrupt non-dyntick-idle execution
 are not counted.
 
-</p><p>Finally, the <tt>-&gt;dynticks</tt> field counts the corresponding
+</p><p>The <tt>-&gt;dynticks</tt> field counts the corresponding
 CPU's transitions to and from dyntick-idle mode, so that this counter
 has an even value when the CPU is in dyntick-idle mode and an odd
 value otherwise.
 
+</p><p>The <tt>-&gt;rcu_need_heavy_qs</tt> field is used
+to record the fact that the RCU core code would really like to
+see a quiescent state from the corresponding CPU, so much so that
+it is willing to call for heavy-weight dyntick-counter operations.
+This flag is checked by RCU's context-switch and <tt>cond_resched()</tt>
+code, which provide a momentary idle sojourn in response.
+
+</p><p>The <tt>-&gt;rcu_qs_ctr</tt> field is used to record
+quiescent states from <tt>cond_resched()</tt>.
+Because <tt>cond_resched()</tt> can execute quite frequently, this
+must be quite lightweight, as in a non-atomic increment of this
+per-CPU field.
+
+</p><p>Finally, the <tt>-&gt;rcu_urgent_qs</tt> field is used to record
+the fact that the RCU core code would really like to see a quiescent
+state from the corresponding CPU, with the various other fields indicating
+just how badly RCU wants this quiescent state.
+This flag is checked by RCU's context-switch and <tt>cond_resched()</tt>
+code, which, if nothing else, non-atomically increment <tt>-&gt;rcu_qs_ctr</tt>
+in response.
+
 <table>
 <tr><th>&nbsp;</th></tr>
 <tr><th align="left">Quick Quiz:</th></tr>

Documentation/RCU/Design/Data-Structures/nxtlist.svg

@@ -19,7 +19,7 @@
    id="svg2"
    version="1.1"
    inkscape:version="0.48.4 r9939"
-   sodipodi:docname="nxtlist.fig">
+   sodipodi:docname="segcblist.svg">
   <metadata
      id="metadata94">
     <rdf:RDF>
@@ -28,7 +28,7 @@
         <dc:format>image/svg+xml</dc:format>
         <dc:type
            rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
+        <dc:title />
       </cc:Work>
     </rdf:RDF>
   </metadata>
@@ -241,61 +241,51 @@
        xml:space="preserve"
        x="225"
        y="675"
-       fill="#000000"
-       font-family="Courier"
        font-style="normal"
        font-weight="bold"
        font-size="324"
-       text-anchor="start"
-       id="text64">nxtlist</text>
+       id="text64"
+       style="font-size:324px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">-&gt;head</text>
     <!-- Text -->
     <text
        xml:space="preserve"
        x="225"
        y="1800"
-       fill="#000000"
-       font-family="Courier"
        font-style="normal"
        font-weight="bold"
        font-size="324"
-       text-anchor="start"
-       id="text66">nxttail[RCU_DONE_TAIL]</text>
+       id="text66"
+       style="font-size:324px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">-&gt;tails[RCU_DONE_TAIL]</text>
     <!-- Text -->
     <text
        xml:space="preserve"
        x="225"
        y="2925"
-       fill="#000000"
-       font-family="Courier"
        font-style="normal"
        font-weight="bold"
        font-size="324"
-       text-anchor="start"
-       id="text68">nxttail[RCU_WAIT_TAIL]</text>
+       id="text68"
+       style="font-size:324px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">-&gt;tails[RCU_WAIT_TAIL]</text>
     <!-- Text -->
     <text
        xml:space="preserve"
        x="225"
        y="4050"
-       fill="#000000"
-       font-family="Courier"
        font-style="normal"
        font-weight="bold"
        font-size="324"
-       text-anchor="start"
-       id="text70">nxttail[RCU_NEXT_READY_TAIL]</text>
+       id="text70"
+       style="font-size:324px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">-&gt;tails[RCU_NEXT_READY_TAIL]</text>
     <!-- Text -->
     <text
        xml:space="preserve"
        x="225"
        y="5175"
-       fill="#000000"
-       font-family="Courier"
        font-style="normal"
        font-weight="bold"
        font-size="324"
-       text-anchor="start"
-       id="text72">nxttail[RCU_NEXT_TAIL]</text>
+       id="text72"
+       style="font-size:324px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">-&gt;tails[RCU_NEXT_TAIL]</text>
     <!-- Text -->
     <text
        xml:space="preserve"

Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html

@@ -284,6 +284,7 @@ Expedited Grace Period Refinements</a></h2>
 	Funnel locking and wait/wakeup</a>.
 <li>	<a href="#Use of Workqueues">Use of Workqueues</a>.
 <li>	<a href="#Stall Warnings">Stall warnings</a>.
+<li>	<a href="#Mid-Boot Operation">Mid-boot operation</a>.
 </ol>
 
 <h3><a name="Idle-CPU Checks">Idle-CPU Checks</a></h3>
@@ -524,7 +525,7 @@ their grace periods and carrying out their wakeups.
 In earlier implementations, the task requesting the expedited
 grace period also drove it to completion.
 This straightforward approach had the disadvantage of needing to
-account for signals sent to user tasks,
+account for POSIX signals sent to user tasks,
 so more recent implemementations use the Linux kernel's
 <a href="https://www.kernel.org/doc/Documentation/workqueue.txt">workqueues</a>.
 
@@ -533,8 +534,8 @@ The requesting task still does counter snapshotting and funnel-lock
 processing, but the task reaching the top of the funnel lock
 does a <tt>schedule_work()</tt> (from <tt>_synchronize_rcu_expedited()</tt>
 so that a workqueue kthread does the actual grace-period processing.
-Because workqueue kthreads do not accept signals, grace-period-wait
-processing need not allow for signals.
+Because workqueue kthreads do not accept POSIX signals, grace-period-wait
+processing need not allow for POSIX signals.
 
 In addition, this approach allows wakeups for the previous expedited
 grace period to be overlapped with processing for the next expedited
@@ -586,6 +587,46 @@ blocking the current grace period are printed.
 Each stall warning results in another pass through the loop, but the
 second and subsequent passes use longer stall times.
 
+<h3><a name="Mid-Boot Operation">Mid-boot operation</a></h3>
+
+<p>
+The use of workqueues has the advantage that the expedited
+grace-period code need not worry about POSIX signals.
+Unfortunately, it has the
+corresponding disadvantage that workqueues cannot be used until
+they are initialized, which does not happen until some time after
+the scheduler spawns the first task.
+Given that there are parts of the kernel that really do want to
+execute grace periods during this mid-boot &ldquo;dead zone&rdquo;,
+expedited grace periods must do something else during thie time.
+
+<p>
+What they do is to fall back to the old practice of requiring that the
+requesting task drive the expedited grace period, as was the case
+before the use of workqueues.
+However, the requesting task is only required to drive the grace period
+during the mid-boot dead zone.
+Before mid-boot, a synchronous grace period is a no-op.
+Some time after mid-boot, workqueues are used.
+
+<p>
+Non-expedited non-SRCU synchronous grace periods must also operate
+normally during mid-boot.
+This is handled by causing non-expedited grace periods to take the
+expedited code path during mid-boot.
+
+<p>
+The current code assumes that there are no POSIX signals during
+the mid-boot dead zone.
+However, if an overwhelming need for POSIX signals somehow arises,
+appropriate adjustments can be made to the expedited stall-warning code.
+One such adjustment would reinstate the pre-workqueue stall-warning
+checks, but only during the mid-boot dead zone.
+
+<p>
+With this refinement, synchronous grace periods can now be used from
+task context pretty much any time during the life of the kernel.
+
 <h3><a name="Summary">
 Summary</a></h3>
 

Documentation/RCU/rcu_dereference.txt

@@ -138,6 +138,15 @@ o	Be very careful about comparing pointers obtained from
 		This sort of comparison occurs frequently when scanning
 		RCU-protected circular linked lists.
 
+		Note that if checks for being within an RCU read-side
+		critical section are not required and the pointer is never
+		dereferenced, rcu_access_pointer() should be used in place
+		of rcu_dereference(). The rcu_access_pointer() primitive
+		does not require an enclosing read-side critical section,
+		and also omits the smp_read_barrier_depends() included in
+		rcu_dereference(), which in turn should provide a small
+		performance gain in some CPUs (e.g., the DEC Alpha).
+
 	o	The comparison is against a pointer that references memory
 		that was initialized "a long time ago."  The reason
 		this is safe is that even if misordering occurs, the

Documentation/RCU/rculist_nulls.txt

 Using hlist_nulls to protect read-mostly linked lists and
-objects using SLAB_DESTROY_BY_RCU allocations.
+objects using SLAB_TYPESAFE_BY_RCU allocations.
 
 Please read the basics in Documentation/RCU/listRCU.txt
 
@@ -7,7 +7,7 @@ Using special makers (called 'nulls') is a convenient way
 to solve following problem :
 
 A typical RCU linked list managing objects which are
-allocated with SLAB_DESTROY_BY_RCU kmem_cache can
+allocated with SLAB_TYPESAFE_BY_RCU kmem_cache can
 use following algos :
 
 1) Lookup algo
@@ -96,7 +96,7 @@ unlock_chain(); // typically a spin_unlock()
 3) Remove algo
 --------------
 Nothing special here, we can use a standard RCU hlist deletion.
-But thanks to SLAB_DESTROY_BY_RCU, beware a deleted object can be reused
+But thanks to SLAB_TYPESAFE_BY_RCU, beware a deleted object can be reused
 very very fast (before the end of RCU grace period)
 
 if (put_last_reference_on(obj) {

Documentation/acpi/acpi-lid.txt

@@ -59,20 +59,28 @@ button driver uses the following 3 modes in order not to trigger issues.
 If the userspace hasn't been prepared to ignore the unreliable "opened"
 events and the unreliable initial state notification, Linux users can use
 the following kernel parameters to handle the possible issues:
-A. button.lid_init_state=open:
+A. button.lid_init_state=method:
+   When this option is specified, the ACPI button driver reports the
+   initial lid state using the returning value of the _LID control method
+   and whether the "opened"/"closed" events are paired fully relies on the
+   firmware implementation.
+   This option can be used to fix some platforms where the returning value
+   of the _LID control method is reliable but the initial lid state
+   notification is missing.
+   This option is the default behavior during the period the userspace
+   isn't ready to handle the buggy AML tables.
+B. button.lid_init_state=open:
    When this option is specified, the ACPI button driver always reports the
    initial lid state as "opened" and whether the "opened"/"closed" events
    are paired fully relies on the firmware implementation.
    This may fix some platforms where the returning value of the _LID
    control method is not reliable and the initial lid state notification is
    missing.
-   This option is the default behavior during the period the userspace
-   isn't ready to handle the buggy AML tables.
 
 If the userspace has been prepared to ignore the unreliable "opened" events
 and the unreliable initial state notification, Linux users should always
 use the following kernel parameter:
-B. button.lid_init_state=ignore:
+C. button.lid_init_state=ignore:
    When this option is specified, the ACPI button driver never reports the
    initial lid state and there is a compensation mechanism implemented to
    ensure that the reliable "closed" notifications can always be delievered

Documentation/acpi/aml-debugger.txt

@@ -15,7 +15,7 @@ kernel.
    CONFIG_ACPI_DEBUGGER=y
    CONFIG_ACPI_DEBUGGER_USER=m
 
-   The userspace utlities can be built from the kernel source tree using
+   The userspace utilities can be built from the kernel source tree using
    the following commands:
 
    $ cd tools

Documentation/admin-guide/index.rst

@@ -60,6 +60,7 @@ configure specific aspects of kernel behavior to your liking.
    mono
    java
    ras
+   pm/index
 
 .. only::  subproject and html