Merge tag 'bcm2835-for-3.10-multiplatform' of...

Merge tag 'bcm2835-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/multiplatform

From Stephen Warren <swarren@wwwdotorg.org>:

ARM: bcm2835: convert to multi-platform

This branch (patch) converts BCM2835 to support being built into a
multi-platform single zImage. This mostly entails a few small Kconfig
tweaks, move the earlyprintk implementation to the standard multi-
platform location, and deleting some unnecessary files.

* tag 'bcm2835-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: convert to multi-platform

Conflicts:
	arch/arm/Kconfig
	arch/arm/Kconfig.debug
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -361,26 +361,6 @@ config ARCH_AT91
 	  This enables support for systems based on Atmel
 	  AT91RM9200 and AT91SAM9* processors.
 
-config ARCH_BCM2835
-	bool "Broadcom BCM2835 family"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_ERRATA_411920
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select CLKSRC_OF
-	select COMMON_CLK
-	select CPU_V6
-	select GENERIC_CLOCKEVENTS
-	select MULTI_IRQ_HANDLER
-	select PINCTRL
-	select PINCTRL_BCM2835
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  This enables support for the Broadcom BCM2835 SoC. This SoC is
-	  use in the Raspberry Pi, and Roku 2 devices.
-
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
@@ -981,6 +961,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-bcm/Kconfig"
 
+source "arch/arm/mach-bcm2835/Kconfig"
+
 source "arch/arm/mach-clps711x/Kconfig"
 
 source "arch/arm/mach-cns3xxx/Kconfig"

arch/arm/Kconfig.debug

@@ -89,6 +89,10 @@ choice
 		bool "Kernel low-level debugging on 9263 and 9g45"
 		depends on HAVE_AT91_DBGU1
 
+	config DEBUG_BCM2835
+		bool "Kernel low-level debugging on BCM2835 PL011 UART"
+		depends on ARCH_BCM2835
+
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
 		depends on ARCH_CLPS711X
@@ -593,6 +597,7 @@ endchoice
 
 config DEBUG_LL_INCLUDE
 	string
+	default "debug/bcm2835.S" if DEBUG_BCM2835
 	default "debug/cns3xxx.S" if DEBUG_CNS3XXX
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \

arch/arm/configs/bcm2835_defconfig

@@ -29,6 +29,8 @@ CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_JUMP_LABEL=y
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_BCM2835=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y

arch/arm/mach-bcm2835/include/mach/debug-macro.S → arch/arm/include/debug/bcm2835.S

@@ -11,7 +11,8 @@
  *
  */
 
-#include <mach/bcm2835_soc.h>
+#define BCM2835_DEBUG_PHYS 0x20201000
+#define BCM2835_DEBUG_VIRT 0xf0201000
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =BCM2835_DEBUG_PHYS

arch/arm/mach-bcm2835/Kconfig

+config ARCH_BCM2835
+	bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select ARM_ERRATA_411920
+	select ARM_TIMER_SP804
+	select CLKDEV_LOOKUP
+	select CLKSRC_OF
+	select CPU_V6
+	select GENERIC_CLOCKEVENTS
+	select PINCTRL
+	select PINCTRL_BCM2835
+	help
+	  This enables support for the Broadcom BCM2835 SoC. This SoC is
+	  use in the Raspberry Pi, and Roku 2 devices.

arch/arm/mach-bcm2835/Makefile.boot

-zreladdr-y := 0x00008000

arch/arm/mach-bcm2835/bcm2835.c

@@ -23,8 +23,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/bcm2835_soc.h>
-
 #define PM_RSTC				0x1c
 #define PM_RSTS				0x20
 #define PM_WDOG				0x24
@@ -34,6 +32,10 @@
 #define PM_RSTC_WRCFG_FULL_RESET	0x00000020
 #define PM_RSTS_HADWRH_SET		0x00000040
 
+#define BCM2835_PERIPH_PHYS	0x20000000
+#define BCM2835_PERIPH_VIRT	0xf0000000
+#define BCM2835_PERIPH_SIZE	SZ_16M
+
 static void __iomem *wdt_regs;
 
 /*

arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h

-/*
- * Copyright (C) 2012 Stephen Warren
- *
- * Derived from code:
- * Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_BCM2835_BCM2835_SOC_H__
-#define __MACH_BCM2835_BCM2835_SOC_H__
-
-#include <asm/sizes.h>
-
-#define BCM2835_PERIPH_PHYS	0x20000000
-#define BCM2835_PERIPH_VIRT	0xf0000000
-#define BCM2835_PERIPH_SIZE	SZ_16M
-#define BCM2835_DEBUG_PHYS	0x20201000
-#define BCM2835_DEBUG_VIRT	0xf0201000
-
-#endif

arch/arm/mach-bcm2835/include/mach/gpio.h

-/* empty */

arch/arm/mach-bcm2835/include/mach/timex.h

-/*
- *  BCM2835 system clock frequency
- *
- *  Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(1000000)
-
-#endif

arch/arm/mach-bcm2835/include/mach/uncompress.h

-/*
- * Copyright (C) 2010 Broadcom
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/io.h>
-#include <linux/amba/serial.h>
-#include <mach/bcm2835_soc.h>
-
-#define UART0_BASE BCM2835_DEBUG_PHYS
-
-#define BCM2835_UART_DR IOMEM(UART0_BASE + UART01x_DR)
-#define BCM2835_UART_FR IOMEM(UART0_BASE + UART01x_FR)
-#define BCM2835_UART_CR IOMEM(UART0_BASE + UART011_CR)
-
-static inline void putc(int c)
-{
-	while (__raw_readl(BCM2835_UART_FR) & UART01x_FR_TXFF)
-		barrier();
-
-	__raw_writel(c, BCM2835_UART_DR);
-}
-
-static inline void flush(void)
-{
-	int fr;
-
-	do {
-		fr = __raw_readl(BCM2835_UART_FR);
-		barrier();
-	} while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
-}
-
-#define arch_decomp_setup()