Merge branch 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ib_srpt: Initial SRP Target merge for v3.3-rc1

drivers/infiniband/Kconfig

@@ -55,6 +55,7 @@ source "drivers/infiniband/hw/nes/Kconfig"
 source "drivers/infiniband/ulp/ipoib/Kconfig"
 
 source "drivers/infiniband/ulp/srp/Kconfig"
+source "drivers/infiniband/ulp/srpt/Kconfig"
 
 source "drivers/infiniband/ulp/iser/Kconfig"
 

drivers/infiniband/Makefile

@@ -10,4 +10,5 @@ obj-$(CONFIG_MLX4_INFINIBAND)		+= hw/mlx4/
 obj-$(CONFIG_INFINIBAND_NES)		+= hw/nes/
 obj-$(CONFIG_INFINIBAND_IPOIB)		+= ulp/ipoib/
 obj-$(CONFIG_INFINIBAND_SRP)		+= ulp/srp/
+obj-$(CONFIG_INFINIBAND_SRPT)		+= ulp/srpt/
 obj-$(CONFIG_INFINIBAND_ISER)		+= ulp/iser/

drivers/infiniband/ulp/srpt/Kconfig

+config INFINIBAND_SRPT
+	tristate "InfiniBand SCSI RDMA Protocol target support"
+	depends on INFINIBAND && TARGET_CORE
+	---help---
+
+	  Support for the SCSI RDMA Protocol (SRP) Target driver. The
+	  SRP protocol is a protocol that allows an initiator to access
+	  a block storage device on another host (target) over a network
+	  that supports the RDMA protocol. Currently the RDMA protocol is
+	  supported by InfiniBand and by iWarp network hardware. More
+	  information about the SRP protocol can be found on the website
+	  of the INCITS T10 technical committee (http://www.t10.org/).

drivers/infiniband/ulp/srpt/Makefile

+ccflags-y			:= -Idrivers/target
+obj-$(CONFIG_INFINIBAND_SRPT)	+= ib_srpt.o

drivers/infiniband/ulp/srpt/ib_dm_mad.h

+/*
+ * Copyright (c) 2006 - 2009 Mellanox Technology Inc.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef IB_DM_MAD_H
+#define IB_DM_MAD_H
+
+#include <linux/types.h>
+
+#include <rdma/ib_mad.h>
+
+enum {
+	/*
+	 * See also section 13.4.7 Status Field, table 115 MAD Common Status
+	 * Field Bit Values and also section 16.3.1.1 Status Field in the
+	 * InfiniBand Architecture Specification.
+	 */
+	DM_MAD_STATUS_UNSUP_METHOD = 0x0008,
+	DM_MAD_STATUS_UNSUP_METHOD_ATTR = 0x000c,
+	DM_MAD_STATUS_INVALID_FIELD = 0x001c,
+	DM_MAD_STATUS_NO_IOC = 0x0100,
+
+	/*
+	 * See also the Device Management chapter, section 16.3.3 Attributes,
+	 * table 279 Device Management Attributes in the InfiniBand
+	 * Architecture Specification.
+	 */
+	DM_ATTR_CLASS_PORT_INFO = 0x01,
+	DM_ATTR_IOU_INFO = 0x10,
+	DM_ATTR_IOC_PROFILE = 0x11,
+	DM_ATTR_SVC_ENTRIES = 0x12
+};
+
+struct ib_dm_hdr {
+	u8 reserved[28];
+};
+
+/*
+ * Structure of management datagram sent by the SRP target implementation.
+ * Contains a management datagram header, reliable multi-packet transaction
+ * protocol (RMPP) header and ib_dm_hdr. Notes:
+ * - The SRP target implementation does not use RMPP or ib_dm_hdr when sending
+ *   management datagrams.
+ * - The header size must be exactly 64 bytes (IB_MGMT_DEVICE_HDR), since this
+ *   is the header size that is passed to ib_create_send_mad() in ib_srpt.c.
+ * - The maximum supported size for a management datagram when not using RMPP
+ *   is 256 bytes -- 64 bytes header and 192 (IB_MGMT_DEVICE_DATA) bytes data.
+ */
+struct ib_dm_mad {
+	struct ib_mad_hdr mad_hdr;
+	struct ib_rmpp_hdr rmpp_hdr;
+	struct ib_dm_hdr dm_hdr;
+	u8 data[IB_MGMT_DEVICE_DATA];
+};
+
+/*
+ * IOUnitInfo as defined in section 16.3.3.3 IOUnitInfo of the InfiniBand
+ * Architecture Specification.
+ */
+struct ib_dm_iou_info {
+	__be16 change_id;
+	u8 max_controllers;
+	u8 op_rom;
+	u8 controller_list[128];
+};
+
+/*
+ * IOControllerprofile as defined in section 16.3.3.4 IOControllerProfile of
+ * the InfiniBand Architecture Specification.
+ */
+struct ib_dm_ioc_profile {
+	__be64 guid;
+	__be32 vendor_id;
+	__be32 device_id;
+	__be16 device_version;
+	__be16 reserved1;
+	__be32 subsys_vendor_id;
+	__be32 subsys_device_id;
+	__be16 io_class;
+	__be16 io_subclass;
+	__be16 protocol;
+	__be16 protocol_version;
+	__be16 service_conn;
+	__be16 initiators_supported;
+	__be16 send_queue_depth;
+	u8 reserved2;
+	u8 rdma_read_depth;
+	__be32 send_size;
+	__be32 rdma_size;
+	u8 op_cap_mask;
+	u8 svc_cap_mask;
+	u8 num_svc_entries;
+	u8 reserved3[9];
+	u8 id_string[64];
+};
+
+struct ib_dm_svc_entry {
+	u8 name[40];
+	__be64 id;
+};
+
+/*
+ * See also section 16.3.3.5 ServiceEntries in the InfiniBand Architecture
+ * Specification. See also section B.7, table B.8 in the T10 SRP r16a document.
+ */
+struct ib_dm_svc_entries {
+	struct ib_dm_svc_entry service_entries[4];
+};
+
+#endif

drivers/infiniband/ulp/srpt/ib_srpt.h

+/*
+ * Copyright (c) 2006 - 2009 Mellanox Technology Inc.  All rights reserved.
+ * Copyright (C) 2009 - 2010 Bart Van Assche <bvanassche@acm.org>.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef IB_SRPT_H
+#define IB_SRPT_H
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+
+#include <rdma/ib_verbs.h>
+#include <rdma/ib_sa.h>
+#include <rdma/ib_cm.h>
+
+#include <scsi/srp.h>
+
+#include "ib_dm_mad.h"
+
+/*
+ * The prefix the ServiceName field must start with in the device management
+ * ServiceEntries attribute pair. See also the SRP specification.
+ */
+#define SRP_SERVICE_NAME_PREFIX		"SRP.T10:"
+
+enum {
+	/*
+	 * SRP IOControllerProfile attributes for SRP target ports that have
+	 * not been defined in <scsi/srp.h>. Source: section B.7, table B.7
+	 * in the SRP specification.
+	 */
+	SRP_PROTOCOL = 0x0108,
+	SRP_PROTOCOL_VERSION = 0x0001,
+	SRP_IO_SUBCLASS = 0x609e,
+	SRP_SEND_TO_IOC = 0x01,
+	SRP_SEND_FROM_IOC = 0x02,
+	SRP_RDMA_READ_FROM_IOC = 0x08,
+	SRP_RDMA_WRITE_FROM_IOC = 0x20,
+
+	/*
+	 * srp_login_cmd.req_flags bitmasks. See also table 9 in the SRP
+	 * specification.
+	 */
+	SRP_MTCH_ACTION = 0x03, /* MULTI-CHANNEL ACTION */
+	SRP_LOSOLNT = 0x10, /* logout solicited notification */
+	SRP_CRSOLNT = 0x20, /* credit request solicited notification */
+	SRP_AESOLNT = 0x40, /* asynchronous event solicited notification */
+
+	/*
+	 * srp_cmd.sol_nt / srp_tsk_mgmt.sol_not bitmasks. See also tables
+	 * 18 and 20 in the SRP specification.
+	 */
+	SRP_SCSOLNT = 0x02, /* SCSOLNT = successful solicited notification */
+	SRP_UCSOLNT = 0x04, /* UCSOLNT = unsuccessful solicited notification */
+
+	/*
+	 * srp_rsp.sol_not / srp_t_logout.sol_not bitmasks. See also tables
+	 * 16 and 22 in the SRP specification.
+	 */
+	SRP_SOLNT = 0x01, /* SOLNT = solicited notification */
+
+	/* See also table 24 in the SRP specification. */
+	SRP_TSK_MGMT_SUCCESS = 0x00,
+	SRP_TSK_MGMT_FUNC_NOT_SUPP = 0x04,
+	SRP_TSK_MGMT_FAILED = 0x05,
+
+	/* See also table 21 in the SRP specification. */
+	SRP_CMD_SIMPLE_Q = 0x0,
+	SRP_CMD_HEAD_OF_Q = 0x1,
+	SRP_CMD_ORDERED_Q = 0x2,
+	SRP_CMD_ACA = 0x4,
+
+	SRP_LOGIN_RSP_MULTICHAN_NO_CHAN = 0x0,
+	SRP_LOGIN_RSP_MULTICHAN_TERMINATED = 0x1,
+	SRP_LOGIN_RSP_MULTICHAN_MAINTAINED = 0x2,
+
+	SRPT_DEF_SG_TABLESIZE = 128,
+	SRPT_DEF_SG_PER_WQE = 16,
+
+	MIN_SRPT_SQ_SIZE = 16,
+	DEF_SRPT_SQ_SIZE = 4096,
+	SRPT_RQ_SIZE = 128,
+	MIN_SRPT_SRQ_SIZE = 4,
+	DEFAULT_SRPT_SRQ_SIZE = 4095,
+	MAX_SRPT_SRQ_SIZE = 65535,
+	MAX_SRPT_RDMA_SIZE = 1U << 24,
+	MAX_SRPT_RSP_SIZE = 1024,
+
+	MIN_MAX_REQ_SIZE = 996,
+	DEFAULT_MAX_REQ_SIZE
+		= sizeof(struct srp_cmd)/*48*/
+		+ sizeof(struct srp_indirect_buf)/*20*/
+		+ 128 * sizeof(struct srp_direct_buf)/*16*/,
+
+	MIN_MAX_RSP_SIZE = sizeof(struct srp_rsp)/*36*/ + 4,
+	DEFAULT_MAX_RSP_SIZE = 256, /* leaves 220 bytes for sense data */
+
+	DEFAULT_MAX_RDMA_SIZE = 65536,
+};
+
+enum srpt_opcode {
+	SRPT_RECV,
+	SRPT_SEND,
+	SRPT_RDMA_MID,
+	SRPT_RDMA_ABORT,
+	SRPT_RDMA_READ_LAST,
+	SRPT_RDMA_WRITE_LAST,
+};
+
+static inline u64 encode_wr_id(u8 opcode, u32 idx)
+{
+	return ((u64)opcode << 32) | idx;
+}
+static inline enum srpt_opcode opcode_from_wr_id(u64 wr_id)
+{
+	return wr_id >> 32;
+}
+static inline u32 idx_from_wr_id(u64 wr_id)
+{
+	return (u32)wr_id;
+}
+
+struct rdma_iu {
+	u64		raddr;
+	u32		rkey;
+	struct ib_sge	*sge;
+	u32		sge_cnt;
+	int		mem_id;
+};
+
+/**
+ * enum srpt_command_state - SCSI command state managed by SRPT.
+ * @SRPT_STATE_NEW:           New command arrived and is being processed.
+ * @SRPT_STATE_NEED_DATA:     Processing a write or bidir command and waiting
+ *                            for data arrival.
+ * @SRPT_STATE_DATA_IN:       Data for the write or bidir command arrived and is
+ *                            being processed.
+ * @SRPT_STATE_CMD_RSP_SENT:  SRP_RSP for SRP_CMD has been sent.
+ * @SRPT_STATE_MGMT:          Processing a SCSI task management command.
+ * @SRPT_STATE_MGMT_RSP_SENT: SRP_RSP for SRP_TSK_MGMT has been sent.
+ * @SRPT_STATE_DONE:          Command processing finished successfully, command
+ *                            processing has been aborted or command processing
+ *                            failed.
+ */
+enum srpt_command_state {
+	SRPT_STATE_NEW		 = 0,
+	SRPT_STATE_NEED_DATA	 = 1,
+	SRPT_STATE_DATA_IN	 = 2,
+	SRPT_STATE_CMD_RSP_SENT	 = 3,
+	SRPT_STATE_MGMT		 = 4,
+	SRPT_STATE_MGMT_RSP_SENT = 5,
+	SRPT_STATE_DONE		 = 6,
+};
+
+/**
+ * struct srpt_ioctx - Shared SRPT I/O context information.
+ * @buf:   Pointer to the buffer.
+ * @dma:   DMA address of the buffer.
+ * @index: Index of the I/O context in its ioctx_ring array.
+ */
+struct srpt_ioctx {
+	void			*buf;
+	dma_addr_t		dma;
+	uint32_t		index;
+};
+
+/**
+ * struct srpt_recv_ioctx - SRPT receive I/O context.
+ * @ioctx:     See above.
+ * @wait_list: Node for insertion in srpt_rdma_ch.cmd_wait_list.
+ */
+struct srpt_recv_ioctx {
+	struct srpt_ioctx	ioctx;
+	struct list_head	wait_list;
+};
+
+/**
+ * struct srpt_send_ioctx - SRPT send I/O context.
+ * @ioctx:       See above.
+ * @ch:          Channel pointer.
+ * @free_list:   Node in srpt_rdma_ch.free_list.
+ * @n_rbuf:      Number of data buffers in the received SRP command.
+ * @rbufs:       Pointer to SRP data buffer array.
+ * @single_rbuf: SRP data buffer if the command has only a single buffer.
+ * @sg:          Pointer to sg-list associated with this I/O context.
+ * @sg_cnt:      SG-list size.
+ * @mapped_sg_count: ib_dma_map_sg() return value.
+ * @n_rdma_ius:  Number of elements in the rdma_ius array.
+ * @rdma_ius:    Array with information about the RDMA mapping.
+ * @tag:         Tag of the received SRP information unit.
+ * @spinlock:    Protects 'state'.
+ * @state:       I/O context state.
+ * @rdma_aborted: If initiating a multipart RDMA transfer failed, whether
+ * 		 the already initiated transfers have finished.
+ * @cmd:         Target core command data structure.
+ * @sense_data:  SCSI sense data.
+ */
+struct srpt_send_ioctx {
+	struct srpt_ioctx	ioctx;
+	struct srpt_rdma_ch	*ch;
+	struct kref		 kref;
+	struct rdma_iu		*rdma_ius;
+	struct srp_direct_buf	*rbufs;
+	struct srp_direct_buf	single_rbuf;
+	struct scatterlist	*sg;
+	struct list_head	free_list;
+	spinlock_t		spinlock;
+	enum srpt_command_state	state;
+	bool			rdma_aborted;
+	struct se_cmd		cmd;
+	struct completion	tx_done;
+	u64			tag;
+	int			sg_cnt;
+	int			mapped_sg_count;
+	u16			n_rdma_ius;
+	u8			n_rdma;
+	u8			n_rbuf;
+	bool			queue_status_only;
+	u8			sense_data[SCSI_SENSE_BUFFERSIZE];
+};
+
+/**
+ * enum rdma_ch_state - SRP channel state.
+ * @CH_CONNECTING:	 QP is in RTR state; waiting for RTU.
+ * @CH_LIVE:		 QP is in RTS state.
+ * @CH_DISCONNECTING:    DREQ has been received; waiting for DREP
+ *                       or DREQ has been send and waiting for DREP
+ *                       or .
+ * @CH_DRAINING:	 QP is in ERR state; waiting for last WQE event.
+ * @CH_RELEASING:	 Last WQE event has been received; releasing resources.
+ */
+enum rdma_ch_state {
+	CH_CONNECTING,
+	CH_LIVE,
+	CH_DISCONNECTING,
+	CH_DRAINING,
+	CH_RELEASING
+};
+
+/**
+ * struct srpt_rdma_ch - RDMA channel.
+ * @wait_queue:    Allows the kernel thread to wait for more work.
+ * @thread:        Kernel thread that processes the IB queues associated with
+ *                 the channel.
+ * @cm_id:         IB CM ID associated with the channel.
+ * @qp:            IB queue pair used for communicating over this channel.
+ * @cq:            IB completion queue for this channel.
+ * @rq_size:       IB receive queue size.
+ * @rsp_size	   IB response message size in bytes.
+ * @sq_wr_avail:   number of work requests available in the send queue.
+ * @sport:         pointer to the information of the HCA port used by this
+ *                 channel.
+ * @i_port_id:     128-bit initiator port identifier copied from SRP_LOGIN_REQ.
+ * @t_port_id:     128-bit target port identifier copied from SRP_LOGIN_REQ.
+ * @max_ti_iu_len: maximum target-to-initiator information unit length.
+ * @req_lim:       request limit: maximum number of requests that may be sent
+ *                 by the initiator without having received a response.
+ * @req_lim_delta: Number of credits not yet sent back to the initiator.
+ * @spinlock:      Protects free_list and state.
+ * @free_list:     Head of list with free send I/O contexts.
+ * @state:         channel state. See also enum rdma_ch_state.
+ * @ioctx_ring:    Send ring.
+ * @wc:            IB work completion array for srpt_process_completion().
+ * @list:          Node for insertion in the srpt_device.rch_list list.
+ * @cmd_wait_list: List of SCSI commands that arrived before the RTU event. This
+ *                 list contains struct srpt_ioctx elements and is protected
+ *                 against concurrent modification by the cm_id spinlock.
+ * @sess:          Session information associated with this SRP channel.
+ * @sess_name:     Session name.
+ * @release_work:  Allows scheduling of srpt_release_channel().
+ * @release_done:  Enables waiting for srpt_release_channel() completion.
+ */
+struct srpt_rdma_ch {
+	wait_queue_head_t	wait_queue;
+	struct task_struct	*thread;
+	struct ib_cm_id		*cm_id;
+	struct ib_qp		*qp;
+	struct ib_cq		*cq;
+	int			rq_size;
+	u32			rsp_size;
+	atomic_t		sq_wr_avail;
+	struct srpt_port	*sport;
+	u8			i_port_id[16];
+	u8			t_port_id[16];
+	int			max_ti_iu_len;
+	atomic_t		req_lim;
+	atomic_t		req_lim_delta;
+	spinlock_t		spinlock;
+	struct list_head	free_list;
+	enum rdma_ch_state	state;
+	struct srpt_send_ioctx	**ioctx_ring;
+	struct ib_wc		wc[16];
+	struct list_head	list;
+	struct list_head	cmd_wait_list;
+	struct se_session	*sess;
+	u8			sess_name[36];
+	struct work_struct	release_work;
+	struct completion	*release_done;
+};
+
+/**
+ * struct srpt_port_attib - Attributes for SRPT port
+ * @srp_max_rdma_size: Maximum size of SRP RDMA transfers for new connections.
+ * @srp_max_rsp_size: Maximum size of SRP response messages in bytes.
+ * @srp_sq_size: Shared receive queue (SRQ) size.
+ */
+struct srpt_port_attrib {
+	u32			srp_max_rdma_size;
+	u32			srp_max_rsp_size;
+	u32			srp_sq_size;
+};
+
+/**
+ * struct srpt_port - Information associated by SRPT with a single IB port.
+ * @sdev:      backpointer to the HCA information.
+ * @mad_agent: per-port management datagram processing information.
+ * @enabled:   Whether or not this target port is enabled.
+ * @port_guid: ASCII representation of Port GUID
+ * @port:      one-based port number.
+ * @sm_lid:    cached value of the port's sm_lid.
+ * @lid:       cached value of the port's lid.
+ * @gid:       cached value of the port's gid.
+ * @port_acl_lock spinlock for port_acl_list:
+ * @work:      work structure for refreshing the aforementioned cached values.
+ * @port_tpg_1 Target portal group = 1 data.
+ * @port_wwn:  Target core WWN data.
+ * @port_acl_list: Head of the list with all node ACLs for this port.
+ */
+struct srpt_port {
+	struct srpt_device	*sdev;
+	struct ib_mad_agent	*mad_agent;
+	bool			enabled;
+	u8			port_guid[64];
+	u8			port;
+	u16			sm_lid;
+	u16			lid;
+	union ib_gid		gid;
+	spinlock_t		port_acl_lock;
+	struct work_struct	work;
+	struct se_portal_group	port_tpg_1;
+	struct se_wwn		port_wwn;
+	struct list_head	port_acl_list;
+	struct srpt_port_attrib port_attrib;
+};
+
+/**
+ * struct srpt_device - Information associated by SRPT with a single HCA.
+ * @device:        Backpointer to the struct ib_device managed by the IB core.
+ * @pd:            IB protection domain.
+ * @mr:            L_Key (local key) with write access to all local memory.
+ * @srq:           Per-HCA SRQ (shared receive queue).
+ * @cm_id:         Connection identifier.
+ * @dev_attr:      Attributes of the InfiniBand device as obtained during the
+ *                 ib_client.add() callback.
+ * @srq_size:      SRQ size.
+ * @ioctx_ring:    Per-HCA SRQ.
+ * @rch_list:      Per-device channel list -- see also srpt_rdma_ch.list.
+ * @ch_releaseQ:   Enables waiting for removal from rch_list.
+ * @spinlock:      Protects rch_list and tpg.
+ * @port:          Information about the ports owned by this HCA.
+ * @event_handler: Per-HCA asynchronous IB event handler.
+ * @list:          Node in srpt_dev_list.
+ */
+struct srpt_device {
+	struct ib_device	*device;
+	struct ib_pd		*pd;
+	struct ib_mr		*mr;
+	struct ib_srq		*srq;
+	struct ib_cm_id		*cm_id;
+	struct ib_device_attr	dev_attr;
+	int			srq_size;
+	struct srpt_recv_ioctx	**ioctx_ring;
+	struct list_head	rch_list;
+	wait_queue_head_t	ch_releaseQ;
+	spinlock_t		spinlock;
+	struct srpt_port	port[2];
+	struct ib_event_handler	event_handler;
+	struct list_head	list;
+};
+
+/**
+ * struct srpt_node_acl - Per-initiator ACL data (managed via configfs).
+ * @i_port_id: 128-bit SRP initiator port ID.
+ * @sport:     port information.
+ * @nacl:      Target core node ACL information.
+ * @list:      Element of the per-HCA ACL list.
+ */
+struct srpt_node_acl {
+	u8			i_port_id[16];
+	struct srpt_port	*sport;
+	struct se_node_acl	nacl;
+	struct list_head	list;
+};
+
+/*
+ * SRP-releated SCSI persistent reservation definitions.
+ *
+ * See also SPC4r28, section 7.6.1 (Protocol specific parameters introduction).
+ * See also SPC4r28, section 7.6.4.5 (TransportID for initiator ports using
+ * SCSI over an RDMA interface).
+ */
+
+enum {
+	SCSI_TRANSPORTID_PROTOCOLID_SRP	= 4,
+};
+
+struct spc_rdma_transport_id {
+	uint8_t protocol_identifier;
+	uint8_t reserved[7];
+	uint8_t i_port_id[16];
+};
+
+#endif				/* IB_SRPT_H */