diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index 631b0f7ae16fd6506a7e171d04f874b00c09da67..9d05ed7f7da51648cafeee84a2a21d9711c19dde 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -369,8 +369,6 @@ does not allocate any driver private context space.
 Switch configuration
 --------------------
 
-- priv_size: additional size needed by the switch driver for its private context
-
 - tag_protocol: this is to indicate what kind of tagging protocol is supported,
   should be a valid value from the dsa_tag_protocol enum
 
@@ -416,11 +414,6 @@ PHY devices and link management
   to the switch port MDIO registers. If unavailable return a negative error
   code.
 
-- poll_link: Function invoked by DSA to query the link state of the switch
-  builtin Ethernet PHYs, per port. This function is responsible for calling
-  netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a
-  single call. Executes from workqueue context.
-
 - adjust_link: Function invoked by the PHY library when a slave network device
   is attached to a PHY device. This function is responsible for appropriately
   configuring the switch port link parameters: speed, duplex, pause based on
@@ -542,6 +535,16 @@ Bridge layer
 Bridge VLAN filtering
 ---------------------
 
+- port_vlan_filtering: bridge layer function invoked when the bridge gets
+  configured for turning on or off VLAN filtering. If nothing specific needs to
+  be done at the hardware level, this callback does not need to be implemented.
+  When VLAN filtering is turned on, the hardware must be programmed with
+  rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed
+  VLAN ID map/rules.  If there is no PVID programmed into the switch port,
+  untagged frames must be rejected as well. When turned off the switch must
+  accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are
+  allowed.
+
 - port_vlan_prepare: bridge layer function invoked when the bridge prepares the
   configuration of a VLAN on the given port. If the operation is not supported
   by the hardware, this function should return -EOPNOTSUPP to inform the bridge