提交 f21179a4 编写于 作者: H Henrique de Moraes Holschuh 提交者: Len Brown

thinkpad-acpi: enhance led support

Add support for extra LEDs on recent ThinkPads, and avoid registering
with the led class the LEDs which are not available for a given
ThinkPad model.

All non-restricted LEDs are always available through the procfs
interface, as the firmware doesn't care if an attempt is made to
access an invalid LED.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>
上级 60201732
......@@ -920,7 +920,7 @@ The available commands are:
echo '<LED number> off' >/proc/acpi/ibm/led
echo '<LED number> blink' >/proc/acpi/ibm/led
The <LED number> range is 0 to 7. The set of LEDs that can be
The <LED number> range is 0 to 15. The set of LEDs that can be
controlled varies from model to model. Here is the common ThinkPad
mapping:
......@@ -932,6 +932,11 @@ mapping:
5 - UltraBase battery slot
6 - (unknown)
7 - standby
8 - dock status 1
9 - dock status 2
10, 11 - (unknown)
12 - thinkvantage
13, 14, 15 - (unknown)
All of the above can be turned on and off and can be made to blink.
......@@ -940,10 +945,12 @@ sysfs notes:
The ThinkPad LED sysfs interface is described in detail by the LED class
documentation, in Documentation/leds-class.txt.
The leds are named (in LED ID order, from 0 to 7):
The LEDs are named (in LED ID order, from 0 to 12):
"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
"tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
"tpacpi::unknown_led", "tpacpi::standby".
"tpacpi::unknown_led", "tpacpi::standby", "tpacpi::dock_status1",
"tpacpi::dock_status2", "tpacpi::unknown_led2", "tpacpi::unknown_led3",
"tpacpi::thinkvantage".
Due to limitations in the sysfs LED class, if the status of the LED
indicators cannot be read due to an error, thinkpad-acpi will report it as
......@@ -958,6 +965,12 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the
"timer" trigger, and leave the delay_on and delay_off parameters set to
zero (to request hardware acceleration autodetection).
LEDs that are known not to exist in a given ThinkPad model are not
made available through the sysfs interface. If you have a dock and you
notice there are LEDs listed for your ThinkPad that do not exist (and
are not in the dock), or if you notice that there are missing LEDs,
a report to ibm-acpi-devel@lists.sourceforge.net is appreciated.
ACPI sounds -- /proc/acpi/ibm/beep
----------------------------------
......@@ -1555,3 +1568,7 @@ Sysfs interface changelog:
0x020300: hotkey enable/disable support removed, attributes
hotkey_bios_enabled and hotkey_enable deprecated and
marked for removal.
0x020400: Marker for 16 LEDs support. Also, LEDs that are known
to not exist in a given model are not registered with
the LED sysfs class anymore.
......@@ -22,7 +22,7 @@
*/
#define TPACPI_VERSION "0.23"
#define TPACPI_SYSFS_VERSION 0x020300
#define TPACPI_SYSFS_VERSION 0x020400
/*
* Changelog:
......@@ -4815,7 +4815,7 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */
"LED", /* all others */
); /* R30, R31 */
#define TPACPI_LED_NUMLEDS 8
#define TPACPI_LED_NUMLEDS 16
static struct tpacpi_led_classdev *tpacpi_leds;
static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
......@@ -4828,15 +4828,20 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
"tpacpi::dock_batt",
"tpacpi::unknown_led",
"tpacpi::standby",
"tpacpi::dock_status1",
"tpacpi::dock_status2",
"tpacpi::unknown_led2",
"tpacpi::unknown_led3",
"tpacpi::thinkvantage",
};
#define TPACPI_SAFE_LEDS 0x0081U
#define TPACPI_SAFE_LEDS 0x1081U
static inline bool tpacpi_is_led_restricted(const unsigned int led)
{
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
return false;
#else
return (TPACPI_SAFE_LEDS & (1 << led)) == 0;
return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
#endif
}
......@@ -4998,6 +5003,10 @@ static int __init tpacpi_init_led(unsigned int led)
tpacpi_leds[led].led = led;
/* LEDs with no name don't get registered */
if (!tpacpi_led_names[led])
return 0;
tpacpi_leds[led].led_classdev.brightness_set = &led_sysfs_set;
tpacpi_leds[led].led_classdev.blink_set = &led_sysfs_blink_set;
if (led_supported == TPACPI_LED_570)
......@@ -5016,10 +5025,59 @@ static int __init tpacpi_init_led(unsigned int led)
return rc;
}
static const struct tpacpi_quirk led_useful_qtable[] __initconst = {
TPACPI_Q_IBM('1', 'E', 0x009f), /* A30 */
TPACPI_Q_IBM('1', 'N', 0x009f), /* A31 */
TPACPI_Q_IBM('1', 'G', 0x009f), /* A31 */
TPACPI_Q_IBM('1', 'I', 0x0097), /* T30 */
TPACPI_Q_IBM('1', 'R', 0x0097), /* T40, T41, T42, R50, R51 */
TPACPI_Q_IBM('7', '0', 0x0097), /* T43, R52 */
TPACPI_Q_IBM('1', 'Y', 0x0097), /* T43 */
TPACPI_Q_IBM('1', 'W', 0x0097), /* R50e */
TPACPI_Q_IBM('1', 'V', 0x0097), /* R51 */
TPACPI_Q_IBM('7', '8', 0x0097), /* R51e */
TPACPI_Q_IBM('7', '6', 0x0097), /* R52 */
TPACPI_Q_IBM('1', 'K', 0x00bf), /* X30 */
TPACPI_Q_IBM('1', 'Q', 0x00bf), /* X31, X32 */
TPACPI_Q_IBM('1', 'U', 0x00bf), /* X40 */
TPACPI_Q_IBM('7', '4', 0x00bf), /* X41 */
TPACPI_Q_IBM('7', '5', 0x00bf), /* X41t */
TPACPI_Q_IBM('7', '9', 0x1f97), /* T60 (1) */
TPACPI_Q_IBM('7', '7', 0x1f97), /* Z60* (1) */
TPACPI_Q_IBM('7', 'F', 0x1f97), /* Z61* (1) */
TPACPI_Q_IBM('7', 'B', 0x1fb7), /* X60 (1) */
/* (1) - may have excess leds enabled on MSB */
/* Defaults (order matters, keep last, don't reorder!) */
{ /* Lenovo */
.vendor = PCI_VENDOR_ID_LENOVO,
.bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
.quirks = 0x1fffU,
},
{ /* IBM ThinkPads with no EC version string */
.vendor = PCI_VENDOR_ID_IBM,
.bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_UNKNOWN,
.quirks = 0x00ffU,
},
{ /* IBM ThinkPads with EC version string */
.vendor = PCI_VENDOR_ID_IBM,
.bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
.quirks = 0x00bfU,
},
};
#undef TPACPI_LEDQ_IBM
#undef TPACPI_LEDQ_LNV
static int __init led_init(struct ibm_init_struct *iibm)
{
unsigned int i;
int rc;
unsigned long useful_leds;
vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
......@@ -5041,6 +5099,9 @@ static int __init led_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
str_supported(led_supported), led_supported);
if (led_supported == TPACPI_LED_NONE)
return 1;
tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
GFP_KERNEL);
if (!tpacpi_leds) {
......@@ -5048,8 +5109,12 @@ static int __init led_init(struct ibm_init_struct *iibm)
return -ENOMEM;
}
useful_leds = tpacpi_check_quirks(led_useful_qtable,
ARRAY_SIZE(led_useful_qtable));
for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
if (!tpacpi_is_led_restricted(i)) {
if (!tpacpi_is_led_restricted(i) &&
test_bit(i, &useful_leds)) {
rc = tpacpi_init_led(i);
if (rc < 0) {
led_exit();
......@@ -5059,12 +5124,11 @@ static int __init led_init(struct ibm_init_struct *iibm)
}
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
if (led_supported != TPACPI_LED_NONE)
printk(TPACPI_NOTICE
"warning: userspace override of important "
"firmware LEDs is enabled\n");
#endif
return (led_supported != TPACPI_LED_NONE)? 0 : 1;
return 0;
}
#define str_led_status(s) \
......@@ -5094,7 +5158,7 @@ static int led_read(char *p)
}
len += sprintf(p + len, "commands:\t"
"<led> on, <led> off, <led> blink (<led> is 0-7)\n");
"<led> on, <led> off, <led> blink (<led> is 0-15)\n");
return len;
}
......@@ -5109,7 +5173,7 @@ static int led_write(char *buf)
return -ENODEV;
while ((cmd = next_cmd(&buf))) {
if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 15)
return -EINVAL;
if (strstr(cmd, "off")) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册