From f0ada6784f680d844d890f5c240d19c8649594e5 Mon Sep 17 00:00:00 2001 From: Mark Einon Date: Thu, 1 Nov 2012 22:56:43 +0000 Subject: [PATCH] staging: et131x: Align ring_index and fbr[] indicies A ring_index value of 0 is being used to reference the free buffer ring fbr[1] and ring_index=1 is used to reference fbr[0]. Avoid this confusing referencing by swapping the indicies so that ring_index=0 refers to fbr[0] and vice versa. Signed-off-by: Mark Einon Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/et131x.c | 105 +++++++++++++------------------- 1 file changed, 43 insertions(+), 62 deletions(-) diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index d1f519267f54..69a07299b74d 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -299,11 +299,6 @@ struct fbr_lookup { /* * struct rx_ring is the sructure representing the adaptor's local * reference(s) to the rings - * - ****************************************************************************** - * IMPORTANT NOTE :- fbr_lookup *fbr[NUM_FBRS] uses index 0 to refer to FBR1 - * and index 1 to refer to FRB0 - ****************************************************************************** */ struct rx_ring { struct fbr_lookup *fbr[NUM_FBRS]; @@ -856,27 +851,27 @@ static void et131x_rx_dma_enable(struct et131x_adapter *adapter) /* Setup the receive dma configuration register for normal operation */ u32 csr = 0x2000; /* FBR1 enable */ - if (adapter->rx_ring.fbr[0]->buffsize == 4096) + if (adapter->rx_ring.fbr[1]->buffsize == 4096) csr |= 0x0800; - else if (adapter->rx_ring.fbr[0]->buffsize == 8192) + else if (adapter->rx_ring.fbr[1]->buffsize == 8192) csr |= 0x1000; - else if (adapter->rx_ring.fbr[0]->buffsize == 16384) + else if (adapter->rx_ring.fbr[1]->buffsize == 16384) csr |= 0x1800; csr |= 0x0400; /* FBR0 enable */ - if (adapter->rx_ring.fbr[1]->buffsize == 256) + if (adapter->rx_ring.fbr[0]->buffsize == 256) csr |= 0x0100; - else if (adapter->rx_ring.fbr[1]->buffsize == 512) + else if (adapter->rx_ring.fbr[0]->buffsize == 512) csr |= 0x0200; - else if (adapter->rx_ring.fbr[1]->buffsize == 1024) + else if (adapter->rx_ring.fbr[0]->buffsize == 1024) csr |= 0x0300; writel(csr, &adapter->regs->rxdma.csr); csr = readl(&adapter->regs->rxdma.csr); - if ((csr & 0x00020000) != 0) { + if (csr & 0x00020000) { udelay(5); csr = readl(&adapter->regs->rxdma.csr); - if ((csr & 0x00020000) != 0) { + if (csr & 0x00020000) { dev_err(&adapter->pdev->dev, "RX Dma failed to exit halt state. CSR 0x%08x\n", csr); @@ -1867,17 +1862,17 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) u32 *base_lo; if (id == 0) { - num_des = &rx_dma->fbr1_num_des; - full_offset = &rx_dma->fbr1_full_offset; - min_des = &rx_dma->fbr1_min_des; - base_hi = &rx_dma->fbr1_base_hi; - base_lo = &rx_dma->fbr1_base_lo; - } else { num_des = &rx_dma->fbr0_num_des; full_offset = &rx_dma->fbr0_full_offset; min_des = &rx_dma->fbr0_min_des; base_hi = &rx_dma->fbr0_base_hi; base_lo = &rx_dma->fbr0_base_lo; + } else { + num_des = &rx_dma->fbr1_num_des; + full_offset = &rx_dma->fbr1_full_offset; + min_des = &rx_dma->fbr1_min_des; + base_hi = &rx_dma->fbr1_base_hi; + base_lo = &rx_dma->fbr1_base_lo; } /* Now's the best time to initialize FBR contents */ @@ -2278,8 +2273,8 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) rx_ring = &adapter->rx_ring; /* Alloc memory for the lookup table */ - rx_ring->fbr[1] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL); rx_ring->fbr[0] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL); + rx_ring->fbr[1] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL); /* The first thing we will do is configure the sizes of the buffer * rings. These will change based on jumbo packet support. Larger @@ -2300,25 +2295,25 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) */ if (adapter->registry_jumbo_packet < 2048) { - rx_ring->fbr[1]->buffsize = 256; - rx_ring->fbr[1]->num_entries = 512; - rx_ring->fbr[0]->buffsize = 2048; + rx_ring->fbr[0]->buffsize = 256; rx_ring->fbr[0]->num_entries = 512; + rx_ring->fbr[1]->buffsize = 2048; + rx_ring->fbr[1]->num_entries = 512; } else if (adapter->registry_jumbo_packet < 4096) { - rx_ring->fbr[1]->buffsize = 512; - rx_ring->fbr[1]->num_entries = 1024; - rx_ring->fbr[0]->buffsize = 4096; - rx_ring->fbr[0]->num_entries = 512; + rx_ring->fbr[0]->buffsize = 512; + rx_ring->fbr[0]->num_entries = 1024; + rx_ring->fbr[1]->buffsize = 4096; + rx_ring->fbr[1]->num_entries = 512; } else { - rx_ring->fbr[1]->buffsize = 1024; - rx_ring->fbr[1]->num_entries = 768; - rx_ring->fbr[0]->buffsize = 16384; - rx_ring->fbr[0]->num_entries = 128; + rx_ring->fbr[0]->buffsize = 1024; + rx_ring->fbr[0]->num_entries = 768; + rx_ring->fbr[1]->buffsize = 16384; + rx_ring->fbr[1]->num_entries = 128; } adapter->rx_ring.psr_num_entries = - adapter->rx_ring.fbr[1]->num_entries + - adapter->rx_ring.fbr[0]->num_entries; + adapter->rx_ring.fbr[0]->num_entries + + adapter->rx_ring.fbr[1]->num_entries; for (id = 0; id < NUM_FBRS; id++) { /* Allocate an area of memory for Free Buffer Ring */ @@ -2565,8 +2560,8 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) } /* Free the FBR Lookup Table */ - kfree(rx_ring->fbr[1]); kfree(rx_ring->fbr[0]); + kfree(rx_ring->fbr[1]); /* Reset Counters */ rx_ring->num_ready_recv = 0; @@ -2660,36 +2655,31 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) /* We don't use any of the OOB data besides status. Otherwise, we * need to clean up OOB data */ - if ((ring_index == 0 && buff_index < rx_local->fbr[1]->num_entries) || - (ring_index == 1 && buff_index < rx_local->fbr[0]->num_entries)) { + if (buff_index < rx_local->fbr[ring_index]->num_entries) { u32 *offset; - u8 id; struct fbr_desc *next; spin_lock_irqsave(&adapter->fbr_lock, flags); - if (ring_index == 1) { - id = 0; - offset = &rx_dma->fbr1_full_offset; - } else { - id = 1; + if (ring_index == 0) offset = &rx_dma->fbr0_full_offset; - } + else + offset = &rx_dma->fbr1_full_offset; - next = (struct fbr_desc *) (rx_local->fbr[id]->ring_virtaddr) + - INDEX10(rx_local->fbr[id]->local_full); + next = (struct fbr_desc *) (rx_local->fbr[ring_index]->ring_virtaddr) + + INDEX10(rx_local->fbr[ring_index]->local_full); /* Handle the Free Buffer Ring advancement here. Write * the PA / Buffer Index for the returned buffer into * the oldest (next to be freed)FBR entry */ - next->addr_hi = rx_local->fbr[id]->bus_high[buff_index]; - next->addr_lo = rx_local->fbr[id]->bus_low[buff_index]; + next->addr_hi = rx_local->fbr[ring_index]->bus_high[buff_index]; + next->addr_lo = rx_local->fbr[ring_index]->bus_low[buff_index]; next->word2 = buff_index; - writel(bump_free_buff_ring(&rx_local->fbr[id]->local_full, - rx_local->fbr[id]->num_entries - 1), - offset); + writel(bump_free_buff_ring(&rx_local->fbr[ring_index]->local_full, + rx_local->fbr[ring_index]->num_entries - 1), + offset); spin_unlock_irqrestore(&adapter->fbr_lock, flags); } else { @@ -2772,10 +2762,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) writel(rx_local->local_psr_full, &adapter->regs->rxdma.psr_full_offset); if (ring_index > 1 || - (ring_index == 0 && - buff_index > rx_local->fbr[1]->num_entries - 1) || - (ring_index == 1 && - buff_index > rx_local->fbr[0]->num_entries - 1)) { + buff_index > rx_local->fbr[ring_index]->num_entries - 1) { /* Illegal buffer or ring index cannot be used by S/W*/ dev_err(&adapter->pdev->dev, "NICRxPkts PSR Entry %d indicates length of %d and/or bad bi(%d)\n", @@ -2828,12 +2815,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) && !(adapter->packet_filter & ET131X_PACKET_TYPE_PROMISCUOUS) && !(adapter->packet_filter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { - /* - * Note - ring_index for fbr[] array is reversed - * 1 for FBR0 etc - */ - buf = rx_local->fbr[(ring_index == 0 ? 1 : 0)]-> - virt[buff_index]; + buf = rx_local->fbr[ring_index]->virt[buff_index]; /* Loop through our list to see if the destination * address of this packet matches one in our list. @@ -2886,9 +2868,8 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) adapter->net_stats.rx_bytes += rfd->len; - /* Note - ring_index for fbr[] array is reversed, 1 for FBR0 etc */ memcpy(skb_put(skb, rfd->len), - rx_local->fbr[(ring_index == 0 ? 1 : 0)]->virt[buff_index], + rx_local->fbr[ring_index]->virt[buff_index], rfd->len); skb->dev = adapter->netdev; -- GitLab