From eeb309a8a6ff86ce462e072bc95ecbe85618505e Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 11 Mar 2010 16:26:22 +0200 Subject: [PATCH] ASoC: tlv320dac33: Add option for keeping the BCLK running Platform data option for the codec to keep the BCLK clock continuously running in FIFO modes (codec master). OMAP3 McBSP when in slave mode needs continuous BCLK running on the serial bus in order to operate correctly. Since in FIFO mode the DAC33 can also shut down the BCLK clock and enable it only when it is needed, let the platforms decide if the CPU side needs the BCLK running or not. Signed-off-by: Peter Ujfalusi Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- include/sound/tlv320dac33-plat.h | 1 + sound/soc/codecs/tlv320dac33.c | 13 +++++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h index ac0665264bdf..3f428d53195b 100644 --- a/include/sound/tlv320dac33-plat.h +++ b/include/sound/tlv320dac33-plat.h @@ -15,6 +15,7 @@ struct tlv320dac33_platform_data { int power_gpio; + int keep_bclk; /* Keep the BCLK running in FIFO modes */ u8 burst_bclkdiv; }; diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index e845c4b9066e..a6f19271aaea 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -93,6 +93,8 @@ struct tlv320dac33_priv { unsigned int nsample; /* burst read amount from host */ u8 burst_bclkdiv; /* BCLK divider value in burst mode */ + int keep_bclk; /* Keep the BCLK continuously running + * in FIFO modes */ enum dac33_state state; }; @@ -803,7 +805,10 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream) */ fifoctrl_a &= ~DAC33_FBYPAS; fifoctrl_a &= ~DAC33_FAUTO; - aictrl_b &= ~DAC33_BCLKON; + if (dac33->keep_bclk) + aictrl_b |= DAC33_BCLKON; + else + aictrl_b &= ~DAC33_BCLKON; break; case DAC33_FIFO_MODE7: /* @@ -814,7 +819,10 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream) */ fifoctrl_a &= ~DAC33_FBYPAS; fifoctrl_a |= DAC33_FAUTO; - aictrl_b &= ~DAC33_BCLKON; + if (dac33->keep_bclk) + aictrl_b |= DAC33_BCLKON; + else + aictrl_b &= ~DAC33_BCLKON; break; default: /* @@ -1234,6 +1242,7 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, dac33->power_gpio = pdata->power_gpio; dac33->burst_bclkdiv = pdata->burst_bclkdiv; + dac33->keep_bclk = pdata->keep_bclk; dac33->irq = client->irq; dac33->nsample = NSAMPLE_MAX; /* Disable FIFO use by default */ -- GitLab