MIPS: Netlogic: Update XLP9XX/2XX core freq calculation

Calculate XLP 9XX and 2XX core frequency from the per-core PLL. This
should give the correct value for all board configurations.
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6870/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/netlogic/xlp-hal/sys.h

@@ -118,6 +118,10 @@
 #define SYS_SCRTCH3				0x4c
 
 /* PLL registers XLP2XX */
+#define SYS_CPU_PLL_CTRL0(core)			(0x1c0 + (core * 4))
+#define SYS_CPU_PLL_CTRL1(core)			(0x1c1 + (core * 4))
+#define SYS_CPU_PLL_CTRL2(core)			(0x1c2 + (core * 4))
+#define SYS_CPU_PLL_CTRL3(core)			(0x1c3 + (core * 4))
 #define SYS_PLL_CTRL0				0x240
 #define SYS_PLL_CTRL1				0x241
 #define SYS_PLL_CTRL2				0x242
@@ -148,6 +152,10 @@
 #define SYS_PLL_MEM_STAT			0x2a4
 
 /* PLL registers XLP9XX */
+#define SYS_9XX_CPU_PLL_CTRL0(core)		(0xc0 + (core * 4))
+#define SYS_9XX_CPU_PLL_CTRL1(core)		(0xc1 + (core * 4))
+#define SYS_9XX_CPU_PLL_CTRL2(core)		(0xc2 + (core * 4))
+#define SYS_9XX_CPU_PLL_CTRL3(core)		(0xc3 + (core * 4))
 #define SYS_9XX_DMC_PLL_CTRL0			0x140
 #define SYS_9XX_DMC_PLL_CTRL1			0x141
 #define SYS_9XX_DMC_PLL_CTRL2			0x142

arch/mips/netlogic/xlp/nlm_hal.c

@@ -206,21 +206,60 @@ int nlm_irq_to_irt(int irq)
 		return xlp_irq_to_irt(irq);
 }
 
-unsigned int nlm_get_core_frequency(int node, int core)
+static unsigned int nlm_xlp2_get_core_frequency(int node, int core)
+{
+	unsigned int pll_post_div, ctrl_val0, ctrl_val1, denom;
+	uint64_t num, sysbase, clockbase;
+
+	if (cpu_is_xlp9xx()) {
+		clockbase = nlm_get_clock_regbase(node);
+		ctrl_val0 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_CPU_PLL_CTRL0(core));
+		ctrl_val1 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_CPU_PLL_CTRL1(core));
+	} else {
+		sysbase = nlm_get_node(node)->sysbase;
+		ctrl_val0 = nlm_read_sys_reg(sysbase,
+						SYS_CPU_PLL_CTRL0(core));
+		ctrl_val1 = nlm_read_sys_reg(sysbase,
+						SYS_CPU_PLL_CTRL1(core));
+	}
+
+	/* Find PLL post divider value */
+	switch ((ctrl_val0 >> 24) & 0x7) {
+	case 1:
+		pll_post_div = 2;
+		break;
+	case 3:
+		pll_post_div = 4;
+		break;
+	case 7:
+		pll_post_div = 8;
+		break;
+	case 6:
+		pll_post_div = 16;
+		break;
+	case 0:
+	default:
+		pll_post_div = 1;
+		break;
+	}
+
+	num = 1000000ULL * (400 * 3 + 100 * (ctrl_val1 & 0x3f));
+	denom = 3 * pll_post_div;
+	do_div(num, denom);
+
+	return (unsigned int)num;
+}
+
+static unsigned int nlm_xlp_get_core_frequency(int node, int core)
 {
 	unsigned int pll_divf, pll_divr, dfs_div, ext_div;
 	unsigned int rstval, dfsval, denom;
 	uint64_t num, sysbase;
 
 	sysbase = nlm_get_node(node)->sysbase;
-	if (cpu_is_xlp9xx())
-		rstval = nlm_read_sys_reg(sysbase, SYS_9XX_POWER_ON_RESET_CFG);
-	else
 	rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
-	if (cpu_is_xlpii()) {
-		num = 1000000ULL * (400 * 3 + 100 * (rstval >> 26));
-		denom = 3;
-	} else {
 	dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
 	pll_divf = ((rstval >> 10) & 0x7f) + 1;
 	pll_divr = ((rstval >> 8)  & 0x3) + 1;
@@ -229,11 +268,19 @@ unsigned int nlm_get_core_frequency(int node, int core)
 
 	num = 800000000ULL * pll_divf;
 	denom = 3 * pll_divr * ext_div * dfs_div;
-	}
 	do_div(num, denom);
+
 	return (unsigned int)num;
 }
 
+unsigned int nlm_get_core_frequency(int node, int core)
+{
+	if (cpu_is_xlpii())
+		return nlm_xlp2_get_core_frequency(node, core);
+	else
+		return nlm_xlp_get_core_frequency(node, core);
+}
+
 /*
  * Calculate PIC frequency from PLL registers.
  * freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) /