From edd7fc7003f31da48d06e215a93ea966a22c2a03 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Mon, 10 Aug 2009 03:29:02 +0300 Subject: [PATCH] ath5k: Wakeup fixes * Don't put chip to full sleep because there are problems during wakeup. Instead hold MAC/Baseband on warm reset state via a new function ath5k_hw_on_hold. * Minor cleanups Signed-off-by: Nick Kossifidis Tested-by: Ben Greear Tested-by: Johannes Stezenbach Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ath5k.h | 1 + drivers/net/wireless/ath/ath5k/attach.c | 2 +- drivers/net/wireless/ath/ath5k/base.c | 44 +++---- drivers/net/wireless/ath/ath5k/reset.c | 155 ++++++++++++++++++------ 4 files changed, 140 insertions(+), 62 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 91375113916b..1047a6cb1d92 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -1157,6 +1157,7 @@ extern void ath5k_unregister_leds(struct ath5k_softc *sc); /* Reset Functions */ extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); +extern int ath5k_hw_on_hold(struct ath5k_hw *ah); extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel); /* Power management functions */ extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index 626306592cf8..238eeb7e166e 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -145,7 +145,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) goto err_free; /* Bring device out of sleep and reset it's units */ - ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true); + ret = ath5k_hw_nic_wakeup(ah, 0, true); if (ret) goto err_free; diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 5d5028538ac2..0370cba8356c 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2446,27 +2446,29 @@ ath5k_stop_hw(struct ath5k_softc *sc) ret = ath5k_stop_locked(sc); if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) { /* - * Set the chip in full sleep mode. Note that we are - * careful to do this only when bringing the interface - * completely to a stop. When the chip is in this state - * it must be carefully woken up or references to - * registers in the PCI clock domain may freeze the bus - * (and system). This varies by chip and is mostly an - * issue with newer parts that go to sleep more quickly. - */ - if (sc->ah->ah_mac_srev >= 0x78) { - /* - * XXX - * don't put newer MAC revisions > 7.8 to sleep because - * of the above mentioned problems - */ - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, " - "not putting device to sleep\n"); - } else { - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, - "putting device to full sleep\n"); - ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0); - } + * Don't set the card in full sleep mode! + * + * a) When the device is in this state it must be carefully + * woken up or references to registers in the PCI clock + * domain may freeze the bus (and system). This varies + * by chip and is mostly an issue with newer parts + * (madwifi sources mentioned srev >= 0x78) that go to + * sleep more quickly. + * + * b) On older chips full sleep results a weird behaviour + * during wakeup. I tested various cards with srev < 0x78 + * and they don't wake up after module reload, a second + * module reload is needed to bring the card up again. + * + * Until we figure out what's going on don't enable + * full chip reset on any chip (this is what Legacy HAL + * and Sam's HAL do anyway). Instead Perform a full reset + * on the device (same as initial state after attach) and + * leave it idle (keep MAC/BB on warm reset) */ + ret = ath5k_hw_on_hold(sc->ah); + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "putting device to sleep\n"); } ath5k_txbuf_free(sc, sc->bbuf); diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 86733fdb4774..34e13c700849 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -258,29 +258,35 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, if (!set_chip) goto commit; - /* Preserve sleep duration */ data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + + /* If card is down we 'll get 0xffff... so we + * need to clean this up before we write the register + */ if (data & 0xffc00000) data = 0; else - data = data & 0xfffcffff; + /* Preserve sleep duration etc */ + data = data & ~AR5K_SLEEP_CTL_SLE; - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, + AR5K_SLEEP_CTL); udelay(15); - for (i = 50; i > 0; i--) { + for (i = 200; i > 0; i--) { /* Check if the chip did wake up */ if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_SPWR_DN) == 0) break; /* Wait a bit and retry */ - udelay(200); - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + udelay(50); + ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, + AR5K_SLEEP_CTL); } /* Fail if the chip didn't wake up */ - if (i <= 0) + if (i == 0) return -EIO; break; @@ -295,6 +301,64 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, return 0; } +/* + * Put device on hold + * + * Put MAC and Baseband on warm reset and + * keep that state (don't clean sleep control + * register). After this MAC and Baseband are + * disabled and a full reset is needed to come + * back. This way we save as much power as possible + * without puting the card on full sleep. + */ +int ath5k_hw_on_hold(struct ath5k_hw *ah) +{ + struct pci_dev *pdev = ah->ah_sc->pdev; + u32 bus_flags; + int ret; + + /* Make sure device is awake */ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); + return ret; + } + + /* + * Put chipset on warm reset... + * + * Note: puting PCI core on warm reset on PCI-E cards + * results card to hang and always return 0xffff... so + * we ingore that flag for PCI-E cards. On PCI cards + * this flag gets cleared after 64 PCI clocks. + */ + bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; + + if (ah->ah_version == AR5K_AR5210) { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | + AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); + mdelay(2); + } else { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + } + + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to put device on warm reset\n"); + return -EIO; + } + + /* ...wakeup again!*/ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to put device on hold\n"); + return ret; + } + + return ret; +} + /* * Bring up MAC + PHY Chips and program PLL * TODO: Half/Quarter rate support @@ -318,6 +382,50 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) return ret; } + /* + * Put chipset on warm reset... + * + * Note: puting PCI core on warm reset on PCI-E cards + * results card to hang and always return 0xffff... so + * we ingore that flag for PCI-E cards. On PCI cards + * this flag gets cleared after 64 PCI clocks. + */ + bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; + + if (ah->ah_version == AR5K_AR5210) { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | + AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); + mdelay(2); + } else { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + } + + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); + return -EIO; + } + + /* ...wakeup again!...*/ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); + return ret; + } + + /* ...clear reset control register and pull device out of + * warm reset */ + if (ath5k_hw_nic_reset(ah, 0)) { + ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); + return -EIO; + } + + /* On initialization skip PLL programming since we don't have + * a channel / mode set yet */ + if (initial) + return 0; + if (ah->ah_version != AR5K_AR5210) { /* * Get channel mode flags @@ -383,39 +491,6 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) AR5K_PHY_TURBO); } - /* reseting PCI on PCI-E cards results card to hang - * and always return 0xffff... so we ingore that flag - * for PCI-E cards */ - bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; - - /* Reset chipset */ - if (ah->ah_version == AR5K_AR5210) { - ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | - AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | - AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); - mdelay(2); - } else { - ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | - AR5K_RESET_CTL_BASEBAND | bus_flags); - } - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); - return -EIO; - } - - /* ...wakeup again!*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); - return ret; - } - - /* ...final warm reset */ - if (ath5k_hw_nic_reset(ah, 0)) { - ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); - return -EIO; - } - if (ah->ah_version != AR5K_AR5210) { /* ...update PLL if needed */ -- GitLab