diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 15e40ee62a94e0c0ce20b07c7d4ff1ce03f78f6b..6aaa3f81755be2e4917decb14c8f52348efeb0d0 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -175,6 +175,15 @@ config AHCI_XGENE help This option enables support for APM X-Gene SoC SATA host controller. +config AHCI_QORIQ + tristate "Freescale QorIQ AHCI SATA support" + depends on OF + help + This option enables support for the Freescale QorIQ AHCI SoC's + onboard AHCI SATA. + + If unsure, say N. + config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index af70919f7ddef6cc0c3e52763a843ada5c6656ac..af45effac18c144f569080b944b595eaaae78fea 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_TEGRA) += ahci_tegra.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_QORIQ) += ahci_qoriq.o libahci.o libahci_platform.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c new file mode 100644 index 0000000000000000000000000000000000000000..e5e4988125542b7e9ce3f794317807cefed560a5 --- /dev/null +++ b/drivers/ata/ahci_qoriq.c @@ -0,0 +1,272 @@ +/* + * Freescale QorIQ AHCI SATA platform driver + * + * Copyright 2015 Freescale, Inc. + * Tang Yuantian + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "ahci-qoriq" + +/* port register definition */ +#define PORT_PHY1 0xA8 +#define PORT_PHY2 0xAC +#define PORT_PHY3 0xB0 +#define PORT_PHY4 0xB4 +#define PORT_PHY5 0xB8 +#define PORT_TRANS 0xC8 + +/* port register default value */ +#define AHCI_PORT_PHY_1_CFG 0xa003fffe +#define AHCI_PORT_PHY_2_CFG 0x28183411 +#define AHCI_PORT_PHY_3_CFG 0x0e081004 +#define AHCI_PORT_PHY_4_CFG 0x00480811 +#define AHCI_PORT_PHY_5_CFG 0x192c96a4 +#define AHCI_PORT_TRANS_CFG 0x08000025 + +#define SATA_ECC_DISABLE 0x00020000 + +enum ahci_qoriq_type { + AHCI_LS1021A, + AHCI_LS1043A, + AHCI_LS2085A, +}; + +struct ahci_qoriq_priv { + struct ccsr_ahci *reg_base; + enum ahci_qoriq_type type; + void __iomem *ecc_addr; +}; + +static const struct of_device_id ahci_qoriq_of_match[] = { + { .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A}, + { .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A}, + { .compatible = "fsl,ls2085a-ahci", .data = (void *)AHCI_LS2085A}, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match); + +static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + void __iomem *port_mmio = ahci_port_base(link->ap); + u32 px_cmd, px_is, px_val; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_qoriq_priv *qoriq_priv = hpriv->plat_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + bool online; + int rc; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + /* + * There is a errata on ls1021a Rev1.0 and Rev2.0 which is: + * A-009042: The device detection initialization sequence + * mistakenly resets some registers. + * + * Workaround for this is: + * The software should read and store PxCMD and PxIS values + * before issuing the device detection initialization sequence. + * After the sequence is complete, software should restore the + * PxCMD and PxIS with the stored values. + */ + if (qoriq_priv->type == AHCI_LS1021A) { + px_cmd = readl(port_mmio + PORT_CMD); + px_is = readl(port_mmio + PORT_IRQ_STAT); + } + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, timing, deadline, &online, + ahci_check_ready); + + /* restore the PxCMD and PxIS on ls1021 */ + if (qoriq_priv->type == AHCI_LS1021A) { + px_val = readl(port_mmio + PORT_CMD); + if (px_val != px_cmd) + writel(px_cmd, port_mmio + PORT_CMD); + + px_val = readl(port_mmio + PORT_IRQ_STAT); + if (px_val != px_is) + writel(px_is, port_mmio + PORT_IRQ_STAT); + } + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + +static struct ata_port_operations ahci_qoriq_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_qoriq_hardreset, +}; + +static const struct ata_port_info ahci_qoriq_port_info = { + .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_qoriq_ops, +}; + +static struct scsi_host_template ahci_qoriq_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) +{ + struct ahci_qoriq_priv *qpriv = hpriv->plat_data; + void __iomem *reg_base = hpriv->mmio; + + switch (qpriv->type) { + case AHCI_LS1021A: + writel(SATA_ECC_DISABLE, qpriv->ecc_addr); + writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + writel(AHCI_PORT_PHY_2_CFG, reg_base + PORT_PHY2); + writel(AHCI_PORT_PHY_3_CFG, reg_base + PORT_PHY3); + writel(AHCI_PORT_PHY_4_CFG, reg_base + PORT_PHY4); + writel(AHCI_PORT_PHY_5_CFG, reg_base + PORT_PHY5); + writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + break; + + case AHCI_LS1043A: + case AHCI_LS2085A: + writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + break; + } + + return 0; +} + +static int ahci_qoriq_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ahci_qoriq_priv *qoriq_priv; + const struct of_device_id *of_id; + struct resource *res; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + of_id = of_match_node(ahci_qoriq_of_match, np); + if (!of_id) + return -ENODEV; + + qoriq_priv = devm_kzalloc(dev, sizeof(*qoriq_priv), GFP_KERNEL); + if (!qoriq_priv) + return -ENOMEM; + + qoriq_priv->type = (enum ahci_qoriq_type)of_id->data; + + if (qoriq_priv->type == AHCI_LS1021A) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "sata-ecc"); + qoriq_priv->ecc_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(qoriq_priv->ecc_addr)) + return PTR_ERR(qoriq_priv->ecc_addr); + } + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + hpriv->plat_data = qoriq_priv; + rc = ahci_qoriq_phy_init(hpriv); + if (rc) + goto disable_resources; + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info, + &ahci_qoriq_sht); + if (rc) + goto disable_resources; + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; +} + +#ifdef CONFIG_PM_SLEEP +static int ahci_qoriq_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + rc = ahci_qoriq_phy_init(hpriv); + if (rc) + goto disable_resources; + + rc = ahci_platform_resume_host(dev); + if (rc) + goto disable_resources; + + /* We resumed so update PM runtime state */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; +} +#endif + +static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend, + ahci_qoriq_resume); + +static struct platform_driver ahci_qoriq_driver = { + .probe = ahci_qoriq_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_qoriq_of_match, + .pm = &ahci_qoriq_pm_ops, + }, +}; +module_platform_driver(ahci_qoriq_driver); + +MODULE_DESCRIPTION("Freescale QorIQ AHCI SATA platform driver"); +MODULE_AUTHOR("Tang Yuantian "); +MODULE_LICENSE("GPL");