Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 ecba3287 编写于 作者: A Arnd Bergmann
浏览文件
操作

Merge branch 'cleanup-part-2' of... 

Merge branch 'cleanup-part-2' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap/cleanup
上级 13340b2a 727e18b4
显示空白变更内容
内联 并排
Showing with 492 addition and 988 deletion
arch/arm/mach-omap1/mcbsp.c
浏览文件 @ ecba3287
......@@ -38,7 +38,7 @@ static void omap1_mcbsp_request(unsigned int id)
* On 1510, 1610 and 1710, McBSP1 and McBSP3
* are DSP public peripherals.
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (id == 0 || id == 2) {
if (dsp_use++ == 0) {
api_clk = clk_get(NULL, "api_ck");
dsp_clk = clk_get(NULL, "dsp_ck");
......@@ -59,7 +59,7 @@ static void omap1_mcbsp_request(unsigned int id)
static void omap1_mcbsp_free(unsigned int id)
{
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (id == 0 || id == 2) {
if (--dsp_use == 0) {
if (!IS_ERR(api_clk)) {
clk_disable(api_clk);
......
arch/arm/mach-omap2/Makefile
浏览文件 @ ecba3287
......@@ -269,4 +269,4 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
obj-y += common-board-devices.o
obj-y += common-board-devices.o twl-common.o
arch/arm/mach-omap2/board-3430sdp.c
浏览文件 @ ecba3287
......@@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void)
omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
}
static int sdp3430_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data sdp3430_bci_data = {
.battery_tmp_tbl = sdp3430_batt_table,
.tblsize = ARRAY_SIZE(sdp3430_batt_table),
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
......@@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
.setup = sdp3430_twl_gpio_setup,
};
static struct twl4030_usb_data sdp3430_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_madc_platform_data sdp3430_madc_data = {
.irq_line = 1,
};
/* regulator consumer mappings */
/* ads7846 on SPI */
......@@ -307,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
......@@ -433,54 +399,10 @@ static struct regulator_init_data sdp3430_vsim = {
.consumer_supplies = sdp3430_vsim_supplies,
};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data sdp3430_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies),
.consumer_supplies = sdp3430_vdda_dac_supplies,
};
static struct regulator_init_data sdp3430_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
.consumer_supplies = sdp3430_vpll2_supplies,
};
static struct twl4030_codec_audio_data sdp3430_audio;
static struct twl4030_codec_data sdp3430_codec = {
.audio_mclk = 26000000,
.audio = &sdp3430_audio,
};
static struct twl4030_platform_data sdp3430_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.bci = &sdp3430_bci_data,
.gpio = &sdp3430_gpio_data,
.madc = &sdp3430_madc_data,
.keypad = &sdp3430_kp_data,
.usb = &sdp3430_usb_data,
.codec = &sdp3430_codec,
.vaux1 = &sdp3430_vaux1,
.vaux2 = &sdp3430_vaux2,
......@@ -489,14 +411,21 @@ static struct twl4030_platform_data sdp3430_twldata = {
.vmmc1 = &sdp3430_vmmc1,
.vmmc2 = &sdp3430_vmmc2,
.vsim = &sdp3430_vsim,
.vdac = &sdp3430_vdac,
.vpll2 = &sdp3430_vpll2,
};
static int __init omap3430_i2c_init(void)
{
/* i2c1 for PMIC only */
omap3_pmic_get_config(&sdp3430_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
sdp3430_twldata.vdac->constraints.apply_uV = true;
sdp3430_twldata.vpll2->constraints.apply_uV = true;
sdp3430_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("twl4030", &sdp3430_twldata);
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
omap_register_i2c_bus(2, 400, NULL, 0);
/* i2c3 on display connector (for DVI, tfp410) */
......
arch/arm/mach-omap2/board-4430sdp.c
浏览文件 @ ecba3287
......@@ -302,14 +302,6 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
static struct twl4030_usb_data omap4_usbphy_data = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 2,
......@@ -332,10 +324,6 @@ static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
......@@ -394,61 +382,6 @@ static struct regulator_init_data sdp4430_vaux1 = {
.consumer_supplies = sdp4430_vaux_supply,
};
static struct regulator_init_data sdp4430_vaux2 = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vaux3 = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data sdp4430_vmmc = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = sdp4430_vmmc_supply,
};
static struct regulator_init_data sdp4430_vpp = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vusim = {
.constraints = {
.min_uV = 1200000,
......@@ -462,74 +395,10 @@ static struct regulator_init_data sdp4430_vusim = {
},
};
static struct regulator_init_data sdp4430_vana = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vcxio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vusb = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_clk32kg = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct twl4030_platform_data sdp4430_twldata = {
.irq_base = TWL6030_IRQ_BASE,
.irq_end = TWL6030_IRQ_END,
/* Regulators */
.vmmc = &sdp4430_vmmc,
.vpp = &sdp4430_vpp,
.vusim = &sdp4430_vusim,
.vana = &sdp4430_vana,
.vcxio = &sdp4430_vcxio,
.vdac = &sdp4430_vdac,
.vusb = &sdp4430_vusb,
.vaux1 = &sdp4430_vaux1,
.vaux2 = &sdp4430_vaux2,
.vaux3 = &sdp4430_vaux3,
.clk32kg = &sdp4430_clk32kg,
.usb = &omap4_usbphy_data
};
static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
......@@ -547,6 +416,16 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
};
static int __init omap4_i2c_init(void)
{
omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC |
TWL_COMMON_REGULATOR_VAUX2 |
TWL_COMMON_REGULATOR_VAUX3 |
TWL_COMMON_REGULATOR_VMMC |
TWL_COMMON_REGULATOR_VPP |
TWL_COMMON_REGULATOR_VANA |
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
......
arch/arm/mach-omap2/board-cm-t35.c
浏览文件 @ ecba3287
......@@ -343,10 +343,6 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply cm_t35_vdac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
REGULATOR_SUPPLY("vdvi", "omapdss"),
};
......@@ -381,39 +377,6 @@ static struct regulator_init_data cm_t35_vsim = {
.consumer_supplies = cm_t35_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data cm_t35_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(cm_t35_vdac_supply),
.consumer_supplies = cm_t35_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data cm_t35_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(cm_t35_vdvi_supply),
.consumer_supplies = cm_t35_vdvi_supply,
};
static struct twl4030_usb_data cm_t35_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static uint32_t cm_t35_keymap[] = {
KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT),
KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN),
......@@ -492,21 +455,23 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
};
static struct twl4030_platform_data cm_t35_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &cm_t35_kp_data,
.usb = &cm_t35_usb_data,
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
.vdac = &cm_t35_vdac,
.vpll2 = &cm_t35_vpll2,
};
static void __init cm_t35_init_i2c(void)
{
omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
cm_t35_twldata.vpll2->constraints.name = "VDVI";
cm_t35_twldata.vpll2->num_consumer_supplies =
ARRAY_SIZE(cm_t35_vdvi_supply);
cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply;
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
......
arch/arm/mach-omap2/board-devkit8000.c
浏览文件 @ ecba3287
......@@ -186,10 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = {
.default_device = &devkit8000_lcd_device,
};
static struct regulator_consumer_supply devkit8000_vdda_dac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_1),
KEY(1, 0, KEY_2),
......@@ -289,20 +285,6 @@ static struct regulator_init_data devkit8000_vmmc1 = {
.consumer_supplies = devkit8000_vmmc1_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data devkit8000_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(devkit8000_vdda_dac_supply),
.consumer_supplies = devkit8000_vdda_dac_supply,
};
/* VPLL1 for digital video outputs */
static struct regulator_init_data devkit8000_vpll1 = {
.constraints = {
......@@ -332,27 +314,10 @@ static struct regulator_init_data devkit8000_vio = {
.consumer_supplies = devkit8000_vio_supply,
};
static struct twl4030_usb_data devkit8000_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data devkit8000_audio_data;
static struct twl4030_codec_data devkit8000_codec_data = {
.audio_mclk = 26000000,
.audio = &devkit8000_audio_data,
};
static struct twl4030_platform_data devkit8000_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &devkit8000_usb_data,
.gpio = &devkit8000_gpio_data,
.codec = &devkit8000_codec_data,
.vmmc1 = &devkit8000_vmmc1,
.vdac = &devkit8000_vdac,
.vpll1 = &devkit8000_vpll1,
.vio = &devkit8000_vio,
.keypad = &devkit8000_kp_data,
......@@ -360,6 +325,9 @@ static struct twl4030_platform_data devkit8000_twldata = {
static int __init devkit8000_i2c_init(void)
{
omap3_pmic_get_config(&devkit8000_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC);
omap3_pmic_init("tps65930", &devkit8000_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
......
arch/arm/mach-omap2/board-igep0020.c
浏览文件 @ ecba3287
......@@ -443,10 +443,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
.setup = igep_twl_gpio_setup,
};
static struct twl4030_usb_data igep_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static int igep2_enable_dvi(struct omap_dss_device *dssdev)
{
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
......@@ -483,26 +479,6 @@ static struct omap_dss_board_info igep2_dss_data = {
.default_device = &igep2_dvi_device,
};
static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data igep2_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies),
.consumer_supplies = igep2_vpll2_supplies,
};
static void __init igep2_display_init(void)
{
int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
......@@ -522,13 +498,6 @@ static void __init igep_init_early(void)
m65kxxxxam_sdrc_params);
}
static struct twl4030_codec_audio_data igep2_audio_data;
static struct twl4030_codec_data igep2_codec_data = {
.audio_mclk = 26000000,
.audio = &igep2_audio_data,
};
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
......@@ -561,11 +530,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = {
};
static struct twl4030_platform_data igep_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &igep_usb_data,
.gpio = &igep_twl4030_gpio_pdata,
.vmmc1 = &igep_vmmc1,
.vio = &igep_vio,
......@@ -581,6 +546,8 @@ static void __init igep_i2c_init(void)
{
int ret;
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
if (machine_is_igep0020()) {
/*
* Bus 3 is attached to the DVI port where devices like the
......@@ -591,9 +558,12 @@ static void __init igep_i2c_init(void)
if (ret)
pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
igep_twldata.codec = &igep2_codec_data;
igep_twldata.keypad = &igep2_keypad_pdata;
igep_twldata.vpll2 = &igep2_vpll2;
/* Get common pmic data */
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VPLL2);
igep_twldata.vpll2->constraints.apply_uV = true;
igep_twldata.vpll2->constraints.name = "VDVI";
}
omap3_pmic_init("twl4030", &igep_twldata);
......
arch/arm/mach-omap2/board-ldp.c
浏览文件 @ ecba3287
......@@ -199,20 +199,12 @@ static void __init omap_ldp_init_early(void)
omap2_init_common_devices(NULL, NULL);
}
static struct twl4030_usb_data ldp_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
};
static struct twl4030_madc_platform_data ldp_madc_data = {
.irq_line = 1,
};
static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
......@@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = {
};
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.madc = &ldp_madc_data,
.usb = &ldp_usb_data,
.vmmc1 = &ldp_vmmc1,
.vaux1 = &ldp_vaux1,
.gpio = &ldp_gpio_data,
......@@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = {
static int __init omap_i2c_init(void)
{
omap3_pmic_get_config(&ldp_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
omap3_pmic_init("twl4030", &ldp_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
......
arch/arm/mach-omap2/board-omap3beagle.c
浏览文件 @ ecba3287
......@@ -209,15 +209,6 @@ static struct omap_dss_board_info beagle_dss_data = {
.default_device = &beagle_dvi_device,
};
static struct regulator_consumer_supply beagle_vdac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static void __init beagle_display_init(void)
{
int r;
......@@ -351,58 +342,11 @@ static struct regulator_init_data beagle_vsim = {
.consumer_supplies = beagle_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data beagle_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(beagle_vdac_supply),
.consumer_supplies = beagle_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data beagle_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies),
.consumer_supplies = beagle_vdvi_supplies,
};
static struct twl4030_usb_data beagle_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data beagle_audio_data;
static struct twl4030_codec_data beagle_codec_data = {
.audio_mclk = 26000000,
.audio = &beagle_audio_data,
};
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
.codec = &beagle_codec_data,
.vmmc1 = &beagle_vmmc1,
.vsim = &beagle_vsim,
.vdac = &beagle_vdac,
.vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
......@@ -413,6 +357,12 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
static int __init omap3_beagle_i2c_init(void)
{
omap3_pmic_get_config(&beagle_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
beagle_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("twl4030", &beagle_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
......
arch/arm/mach-omap2/board-omap3evm.c
浏览文件 @ ecba3287
......@@ -396,10 +396,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
.setup = omap3evm_twl_gpio_setup,
};
static struct twl4030_usb_data omap3evm_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
......@@ -434,56 +430,6 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
.rep = 1,
};
static struct twl4030_madc_platform_data omap3evm_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data omap3evm_audio_data;
static struct twl4030_codec_data omap3evm_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3evm_audio_data,
};
static struct regulator_consumer_supply omap3_evm_vdda_dac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_evm_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_evm_vdda_dac_supply),
.consumer_supplies = omap3_evm_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data omap3_evm_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies),
.consumer_supplies = omap3_evm_vpll2_supplies,
};
/* ads7846 on SPI */
static struct regulator_consumer_supply omap3evm_vio_supply[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
......@@ -547,17 +493,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
#endif
static struct twl4030_platform_data omap3evm_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
.madc = &omap3evm_madc_data,
.usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
.codec = &omap3evm_codec_data,
.vdac = &omap3_evm_vdac,
.vpll2 = &omap3_evm_vpll2,
.vio = &omap3evm_vio,
.vmmc1 = &omap3evm_vmmc1,
.vsim = &omap3evm_vsim,
......@@ -565,6 +503,14 @@ static struct twl4030_platform_data omap3evm_twldata = {
static int __init omap3_evm_i2c_init(void)
{
omap3_pmic_get_config(&omap3evm_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
omap3evm_twldata.vdac->constraints.apply_uV = true;
omap3evm_twldata.vpll2->constraints.apply_uV = true;
omap3_pmic_init("twl4030", &omap3evm_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
......
arch/arm/mach-omap2/board-omap3pandora.c
浏览文件 @ ecba3287
......@@ -332,10 +332,6 @@ static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
};
static struct regulator_consumer_supply pandora_vdda_dac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
......@@ -391,36 +387,6 @@ static struct regulator_init_data pandora_vmmc2 = {
.consumer_supplies = pandora_vmmc2_supply,
};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data pandora_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(pandora_vdda_dac_supply),
.consumer_supplies = pandora_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data pandora_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies),
.consumer_supplies = pandora_vdds_supplies,
};
/* VAUX1 for LCD */
static struct regulator_init_data pandora_vaux1 = {
.constraints = {
......@@ -508,29 +474,12 @@ static struct platform_device pandora_vwlan_device = {
},
};
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data omap3pandora_audio_data;
static struct twl4030_codec_data omap3pandora_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3pandora_audio_data,
};
static struct twl4030_bci_platform_data pandora_bci_data;
static struct twl4030_platform_data omap3pandora_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
.usb = &omap3pandora_usb_data,
.codec = &omap3pandora_codec_data,
.vmmc1 = &pandora_vmmc1,
.vmmc2 = &pandora_vmmc2,
.vdac = &pandora_vdac,
.vpll2 = &pandora_vpll2,
.vaux1 = &pandora_vaux1,
.vaux2 = &pandora_vaux2,
.vaux4 = &pandora_vaux4,
......@@ -548,6 +497,17 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
static int __init omap3pandora_i2c_init(void)
{
omap3_pmic_get_config(&omap3pandora_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
omap3pandora_twldata.vdac->constraints.apply_uV = true;
omap3pandora_twldata.vpll2->constraints.apply_uV = true;
omap3pandora_twldata.vpll2->num_consumer_supplies =
ARRAY_SIZE(pandora_vdds_supplies);
omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
omap3_pmic_init("tps65950", &omap3pandora_twldata);
/* i2c2 pins are not connected */
omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
......
arch/arm/mach-omap2/board-omap3stalker.c
浏览文件 @ ecba3287
......@@ -349,10 +349,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
.setup = omap3stalker_twl_gpio_setup,
};
static struct twl4030_usb_data omap3stalker_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
......@@ -387,69 +383,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = {
.rep = 1,
};
static struct twl4030_madc_platform_data omap3stalker_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data omap3stalker_audio_data;
static struct twl4030_codec_data omap3stalker_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3stalker_audio_data,
};
static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_stalker_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vdda_dac_supply),
.consumer_supplies = omap3_stalker_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data omap3_stalker_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies),
.consumer_supplies = omap3_stalker_vpll2_supplies,
};
static struct twl4030_platform_data omap3stalker_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &omap3stalker_kp_data,
.madc = &omap3stalker_madc_data,
.usb = &omap3stalker_usb_data,
.gpio = &omap3stalker_gpio_data,
.codec = &omap3stalker_codec_data,
.vdac = &omap3_stalker_vdac,
.vpll2 = &omap3_stalker_vpll2,
.vmmc1 = &omap3stalker_vmmc1,
.vsim = &omap3stalker_vsim,
};
......@@ -470,6 +407,15 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
static int __init omap3_stalker_i2c_init(void)
{
omap3_pmic_get_config(&omap3stalker_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
omap3stalker_twldata.vdac->constraints.apply_uV = true;
omap3stalker_twldata.vpll2->constraints.apply_uV = true;
omap3stalker_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("twl4030", &omap3stalker_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
......
arch/arm/mach-omap2/board-omap3touchbook.c
浏览文件 @ ecba3287
......@@ -206,58 +206,11 @@ static struct regulator_init_data touchbook_vsim = {
.consumer_supplies = touchbook_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data touchbook_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(touchbook_vdac_supply),
.consumer_supplies = touchbook_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data touchbook_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(touchbook_vdvi_supply),
.consumer_supplies = touchbook_vdvi_supply,
};
static struct twl4030_usb_data touchbook_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data touchbook_audio_data;
static struct twl4030_codec_data touchbook_codec_data = {
.audio_mclk = 26000000,
.audio = &touchbook_audio_data,
};
static struct twl4030_platform_data touchbook_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &touchbook_usb_data,
.gpio = &touchbook_gpio_data,
.codec = &touchbook_codec_data,
.vmmc1 = &touchbook_vmmc1,
.vsim = &touchbook_vsim,
.vdac = &touchbook_vdac,
.vpll2 = &touchbook_vpll2,
};
static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
......@@ -269,8 +222,20 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
static int __init omap3_touchbook_i2c_init(void)
{
/* Standard TouchBook bus */
omap3_pmic_init("twl4030", &touchbook_twldata);
omap3_pmic_get_config(&touchbook_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
touchbook_twldata.vdac->num_consumer_supplies =
ARRAY_SIZE(touchbook_vdac_supply);
touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
touchbook_twldata.vpll2->constraints.name = "VDVI";
touchbook_twldata.vpll2->num_consumer_supplies =
ARRAY_SIZE(touchbook_vdvi_supply);
touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
omap3_pmic_init("twl4030", &touchbook_twldata);
/* Additional TouchBook bus */
omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
ARRAY_SIZE(touchBook_i2c_boardinfo));
......
arch/arm/mach-omap2/board-omap4panda.c
浏览文件 @ ecba3287
......@@ -154,14 +154,6 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
static struct twl4030_usb_data omap4_usbphy_data = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
......@@ -181,10 +173,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
};
......@@ -269,128 +257,8 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
return 0;
}
static struct regulator_init_data omap4_panda_vaux2 = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vaux3 = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data omap4_panda_vmmc = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc_supply),
.consumer_supplies = omap4_panda_vmmc_supply,
};
static struct regulator_init_data omap4_panda_vpp = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vana = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vcxio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vusb = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_clk32kg = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct twl4030_platform_data omap4_panda_twldata = {
.irq_base = TWL6030_IRQ_BASE,
.irq_end = TWL6030_IRQ_END,
/* Regulators */
.vmmc = &omap4_panda_vmmc,
.vpp = &omap4_panda_vpp,
.vana = &omap4_panda_vana,
.vcxio = &omap4_panda_vcxio,
.vdac = &omap4_panda_vdac,
.vusb = &omap4_panda_vusb,
.vaux2 = &omap4_panda_vaux2,
.vaux3 = &omap4_panda_vaux3,
.clk32kg = &omap4_panda_clk32kg,
.usb = &omap4_usbphy_data,
};
/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata;
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
......@@ -404,6 +272,16 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
static int __init omap4_panda_i2c_init(void)
{
omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC |
TWL_COMMON_REGULATOR_VAUX2 |
TWL_COMMON_REGULATOR_VAUX3 |
TWL_COMMON_REGULATOR_VMMC |
TWL_COMMON_REGULATOR_VPP |
TWL_COMMON_REGULATOR_VANA |
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &omap4_panda_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
......
arch/arm/mach-omap2/board-overo.c
浏览文件 @ ecba3287
......@@ -265,15 +265,6 @@ static struct omap_dss_board_info overo_dss_data = {
.default_device = &overo_dvi_device,
};
static struct regulator_consumer_supply overo_vdda_dac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
......@@ -433,10 +424,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = {
.setup = overo_twl_gpio_setup,
};
static struct twl4030_usb_data overo_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct regulator_init_data overo_vmmc1 = {
.constraints = {
.min_uV = 1850000,
......@@ -451,55 +438,19 @@ static struct regulator_init_data overo_vmmc1 = {
.consumer_supplies = overo_vmmc1_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data overo_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(overo_vdda_dac_supply),
.consumer_supplies = overo_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data overo_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply),
.consumer_supplies = overo_vdds_dsi_supply,
};
static struct twl4030_codec_audio_data overo_audio_data;
static struct twl4030_codec_data overo_codec_data = {
.audio_mclk = 26000000,
.audio = &overo_audio_data,
};
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
.usb = &overo_usb_data,
.codec = &overo_codec_data,
.vmmc1 = &overo_vmmc1,
.vdac = &overo_vdac,
.vpll2 = &overo_vpll2,
};
static int __init overo_i2c_init(void)
{
omap3_pmic_get_config(&overo_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
overo_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("tps65950", &overo_twldata);
/* i2c2 pins are used for gpio */
omap_register_i2c_bus(3, 400, NULL, 0);
......
arch/arm/mach-omap2/board-rm680.c
浏览文件 @ ecba3287
......@@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = {
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
static struct twl4030_usb_data rm680_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_platform_data rm680_twl_data = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &rm680_gpio_data,
.usb = &rm680_usb_data,
/* add rest of the children here */
};
static void __init rm680_i2c_init(void)
{
omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
......
arch/arm/mach-omap2/board-rx51-peripherals.c
浏览文件 @ ecba3287
......@@ -288,10 +288,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
.rep = 1,
};
static struct twl4030_madc_platform_data rx51_madc_data = {
.irq_line = 1,
};
/* Enable input logic and pull all lines up when eMMC is on. */
static struct omap_board_mux rx51_mmc2_on_mux[] = {
OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
......@@ -398,10 +394,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
REGULATOR_SUPPLY("vdd", "2-0063"),
};
static struct regulator_consumer_supply rx51_vdac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static struct regulator_init_data rx51_vaux1 = {
.constraints = {
.name = "V28",
......@@ -518,21 +510,6 @@ static struct regulator_init_data rx51_vsim = {
.consumer_supplies = rx51_vsim_supply,
};
static struct regulator_init_data rx51_vdac = {
.constraints = {
.name = "VDAC",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(rx51_vdac_supply),
.consumer_supplies = rx51_vdac_supply,
};
static struct regulator_init_data rx51_vio = {
.constraints = {
.min_uV = 1800000,
......@@ -603,10 +580,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
.setup = rx51_twlgpio_setup,
};
static struct twl4030_usb_data rx51_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_ins sleep_on_seq[] __initdata = {
/*
* Turn off everything
......@@ -778,14 +751,9 @@ struct twl4030_codec_data rx51_codec_data __initdata = {
};
static struct twl4030_platform_data rx51_twldata __initdata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
.madc = &rx51_madc_data,
.usb = &rx51_usb_data,
.power = &rx51_t2scripts_data,
.codec = &rx51_codec_data,
......@@ -794,7 +762,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
.vsim = &rx51_vsim,
.vdac = &rx51_vdac,
.vio = &rx51_vio,
};
......@@ -850,6 +817,13 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vaux3 = &rx51_vaux3_cam;
}
rx51_twldata.vmmc2 = &rx51_vmmc2;
omap3_pmic_get_config(&rx51_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
TWL_COMMON_REGULATOR_VDAC);
rx51_twldata.vdac->constraints.apply_uV = true;
rx51_twldata.vdac->constraints.name = "VDAC";
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
......
arch/arm/mach-omap2/board-zoom-peripherals.c
浏览文件 @ ecba3287
......@@ -226,41 +226,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_consumer_supply zoom_vdda_dac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static struct regulator_init_data zoom_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies),
.consumer_supplies = zoom_vpll2_supplies,
};
static struct regulator_init_data zoom_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(zoom_vdda_dac_supply),
.consumer_supplies = zoom_vdda_dac_supply,
};
static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
......@@ -285,26 +250,6 @@ static void zoom2_set_hs_extmute(int mute)
gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
}
static int zoom_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data zoom_bci_data = {
.battery_tmp_tbl = zoom_batt_table,
.tblsize = ARRAY_SIZE(zoom_batt_table),
};
static struct twl4030_usb_data zoom_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data zoom_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
......@@ -312,41 +257,29 @@ static struct twl4030_gpio_platform_data zoom_gpio_data = {
.setup = zoom_twl_gpio_setup,
};
static struct twl4030_madc_platform_data zoom_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data zoom_audio_data;
static struct twl4030_codec_data zoom_codec_data = {
.audio_mclk = 26000000,
.audio = &zoom_audio_data,
};
static struct twl4030_platform_data zoom_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.bci = &zoom_bci_data,
.madc = &zoom_madc_data,
.usb = &zoom_usb_data,
.gpio = &zoom_gpio_data,
.keypad = &zoom_kp_twl4030_data,
.codec = &zoom_codec_data,
.vmmc1 = &zoom_vmmc1,
.vmmc2 = &zoom_vmmc2,
.vsim = &zoom_vsim,
.vpll2 = &zoom_vpll2,
.vdac = &zoom_vdac,
};
static int __init omap_i2c_init(void)
{
omap3_pmic_get_config(&zoom_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
if (machine_is_omap_zoom2()) {
zoom_audio_data.ramp_delay_value = 3; /* 161 ms */
zoom_audio_data.hs_extmute = 1;
zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
struct twl4030_codec_audio_data *audio_data;
audio_data = zoom_twldata.codec->audio;
audio_data->ramp_delay_value = 3; /* 161 ms */
audio_data->hs_extmute = 1;
audio_data->set_hs_extmute = zoom2_set_hs_extmute;
}
omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
......
arch/arm/mach-omap2/common-board-devices.c
浏览文件 @ ecba3287
......@@ -20,36 +20,15 @@
*
*/
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/i2c.h>
#include <plat/mcspi.h>
#include <plat/nand.h>
#include "common-board-devices.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
.flags = I2C_CLIENT_WAKE,
};
void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
{
strncpy(pmic_i2c_board_info.type, pmic_type,
sizeof(pmic_i2c_board_info.type));
pmic_i2c_board_info.irq = pmic_irq;
pmic_i2c_board_info.platform_data = pmic_data;
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
......
arch/arm/mach-omap2/common-board-devices.h
浏览文件 @ ecba3287
#ifndef __OMAP_COMMON_BOARD_DEVICES__
#define __OMAP_COMMON_BOARD_DEVICES__
#include "twl-common.h"
#define NAND_BLOCK_SIZE SZ_128K
struct twl4030_platform_data;
struct mtd_partition;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
static inline void omap2_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
}
static inline void omap3_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
}
static inline void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
}
struct ads7846_platform_data;
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
......
arch/arm/mach-omap2/twl-common.c 0 → 100644
浏览文件 @ ecba3287
/*
* twl-common.c
*
* Copyright (C) 2011 Texas Instruments, Inc..
* Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <plat/i2c.h>
#include <plat/usb.h>
#include "twl-common.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
.flags = I2C_CLIENT_WAKE,
};
void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
{
strncpy(pmic_i2c_board_info.type, pmic_type,
sizeof(pmic_i2c_board_info.type));
pmic_i2c_board_info.irq = pmic_irq;
pmic_i2c_board_info.platform_data = pmic_data;
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
static struct twl4030_usb_data omap4_usb_pdata = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct twl4030_usb_data omap3_usb_pdata = {
.usb_mode = T2_USB_MODE_ULPI,
};
static int omap3_batt_table[] = {
/* 0 C */
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data omap3_bci_pdata = {
.battery_tmp_tbl = omap3_batt_table,
.tblsize = ARRAY_SIZE(omap3_batt_table),
};
static struct twl4030_madc_platform_data omap3_madc_pdata = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data omap3_audio;
static struct twl4030_codec_data omap3_codec_pdata = {
.audio_mclk = 26000000,
.audio = &omap3_audio,
};
static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static struct regulator_init_data omap3_vdac_idata = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_vdda_dac_supplies),
.consumer_supplies = omap3_vdda_dac_supplies,
};
static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data omap3_vpll2_idata = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_vpll2_supplies),
.consumer_supplies = omap3_vpll2_supplies,
};
static struct regulator_init_data omap4_vdac_idata = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_vaux2_idata = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_vaux3_idata = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_consumer_supply omap4_vmmc_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data omap4_vmmc_idata = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_vmmc_supply),
.consumer_supplies = omap4_vmmc_supply,
};
static struct regulator_init_data omap4_vpp_idata = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_vana_idata = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_vcxio_idata = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_vusb_idata = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_clk32kg_idata = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags)
{
if (!pmic_data->irq_base)
pmic_data->irq_base = TWL6030_IRQ_BASE;
if (!pmic_data->irq_end)
pmic_data->irq_end = TWL6030_IRQ_END;
/* Common platform data configurations */
if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
pmic_data->usb = &omap4_usb_pdata;
/* Common regulator configurations */
if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
pmic_data->vdac = &omap4_vdac_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VAUX2 && !pmic_data->vaux2)
pmic_data->vaux2 = &omap4_vaux2_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VAUX3 && !pmic_data->vaux3)
pmic_data->vaux3 = &omap4_vaux3_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VMMC && !pmic_data->vmmc)
pmic_data->vmmc = &omap4_vmmc_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VPP && !pmic_data->vpp)
pmic_data->vpp = &omap4_vpp_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VANA && !pmic_data->vana)
pmic_data->vana = &omap4_vana_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VCXIO && !pmic_data->vcxio)
pmic_data->vcxio = &omap4_vcxio_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VUSB && !pmic_data->vusb)
pmic_data->vusb = &omap4_vusb_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG &&
!pmic_data->clk32kg)
pmic_data->clk32kg = &omap4_clk32kg_idata;
}
void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags)
{
if (!pmic_data->irq_base)
pmic_data->irq_base = TWL4030_IRQ_BASE;
if (!pmic_data->irq_end)
pmic_data->irq_end = TWL4030_IRQ_END;
/* Common platform data configurations */
if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
pmic_data->usb = &omap3_usb_pdata;
if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
pmic_data->bci = &omap3_bci_pdata;
if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
pmic_data->madc = &omap3_madc_pdata;
if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec)
pmic_data->codec = &omap3_codec_pdata;
/* Common regulator configurations */
if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
pmic_data->vdac = &omap3_vdac_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
pmic_data->vpll2 = &omap3_vpll2_idata;
}
arch/arm/mach-omap2/twl-common.h 0 → 100644
浏览文件 @ ecba3287
#ifndef __OMAP_PMIC_COMMON__
#define __OMAP_PMIC_COMMON__
#define TWL_COMMON_PDATA_USB (1 << 0)
#define TWL_COMMON_PDATA_BCI (1 << 1)
#define TWL_COMMON_PDATA_MADC (1 << 2)
#define TWL_COMMON_PDATA_AUDIO (1 << 3)
/* Common LDO regulators for TWL4030/TWL6030 */
#define TWL_COMMON_REGULATOR_VDAC (1 << 0)
#define TWL_COMMON_REGULATOR_VAUX1 (1 << 1)
#define TWL_COMMON_REGULATOR_VAUX2 (1 << 2)
#define TWL_COMMON_REGULATOR_VAUX3 (1 << 3)
/* TWL6030 LDO regulators */
#define TWL_COMMON_REGULATOR_VMMC (1 << 4)
#define TWL_COMMON_REGULATOR_VPP (1 << 5)
#define TWL_COMMON_REGULATOR_VUSIM (1 << 6)
#define TWL_COMMON_REGULATOR_VANA (1 << 7)
#define TWL_COMMON_REGULATOR_VCXIO (1 << 8)
#define TWL_COMMON_REGULATOR_VUSB (1 << 9)
#define TWL_COMMON_REGULATOR_CLK32KG (1 << 10)
/* TWL4030 LDO regulators */
#define TWL_COMMON_REGULATOR_VPLL1 (1 << 4)
#define TWL_COMMON_REGULATOR_VPLL2 (1 << 5)
struct twl4030_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
static inline void omap2_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
}
static inline void omap3_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
}
static inline void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
}
void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);
void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);
#endif /* __OMAP_PMIC_COMMON__ */
arch/arm/plat-omap/include/plat/mcbsp.h
浏览文件 @ ecba3287
......@@ -33,7 +33,7 @@
#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \
static struct platform_device omap_mcbsp##port_nr = { \
.name = "omap-mcbsp-dai", \
.id = OMAP_MCBSP##port_nr, \
.id = port_nr - 1, \
}
#define MCBSP_CONFIG_TYPE2 0x2
......@@ -331,14 +331,6 @@ struct omap_mcbsp_reg_cfg {
u16 rccr;
};
typedef enum {
OMAP_MCBSP1 = 0,
OMAP_MCBSP2,
OMAP_MCBSP3,
OMAP_MCBSP4,
OMAP_MCBSP5
} omap_mcbsp_id;
typedef enum {
OMAP_MCBSP_WORD_8 = 0,
OMAP_MCBSP_WORD_12,
......@@ -385,8 +377,6 @@ struct omap_mcbsp {
void __iomem *io_base;
u8 id;
u8 free;
omap_mcbsp_word_length rx_word_length;
omap_mcbsp_word_length tx_word_length;
int rx_irq;
int tx_irq;
......
arch/arm/plat-omap/mcbsp.c
浏览文件 @ ecba3287
......@@ -869,9 +869,6 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
if (cpu_is_omap34xx())
omap_st_start(mcbsp);
mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
/* Only enable SRG, if McBSP is master */
w = MCBSP_READ_CACHE(mcbsp, PCR0);
if (w & (FSXM | FSRM | CLKXM | CLKRM))
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或