diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h index d57c08acedfc2e5f1167a1f3a861094662c486fb..63d5ca49cece245e79f83f3c08b150de18d508a3 100644 --- a/arch/powerpc/include/asm/device.h +++ b/arch/powerpc/include/asm/device.h @@ -31,6 +31,9 @@ struct dev_archdata { #ifdef CONFIG_SWIOTLB dma_addr_t max_direct_dma_addr; #endif +#ifdef CONFIG_EEH + struct eeh_dev *edev; +#endif }; struct pdev_archdata { diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index ad8f31834e005a1a10e8bc45dbe2c0b61e77591d..daaad91ed57674a0df46508d0b209a6d159c8fe3 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -31,6 +31,43 @@ struct device_node; #ifdef CONFIG_EEH +/* + * The struct is used to trace EEH state for the associated + * PCI device node or PCI device. In future, it might + * represent PE as well so that the EEH device to form + * another tree except the currently existing tree of PCI + * buses and PCI devices + */ +#define EEH_MODE_SUPPORTED (1<<0) /* EEH supported on the device */ +#define EEH_MODE_NOCHECK (1<<1) /* EEH check should be skipped */ +#define EEH_MODE_ISOLATED (1<<2) /* The device has been isolated */ +#define EEH_MODE_RECOVERING (1<<3) /* Recovering the device */ +#define EEH_MODE_IRQ_DISABLED (1<<4) /* Interrupt disabled */ + +struct eeh_dev { + int mode; /* EEH mode */ + int class_code; /* Class code of the device */ + int config_addr; /* Config address */ + int pe_config_addr; /* PE config address */ + int check_count; /* Times of ignored error */ + int freeze_count; /* Times of froze up */ + int false_positives; /* Times of reported #ff's */ + u32 config_space[16]; /* Saved PCI config space */ + struct pci_controller *phb; /* Associated PHB */ + struct device_node *dn; /* Associated device node */ + struct pci_dev *pdev; /* Associated PCI device */ +}; + +static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev) +{ + return edev->dn; +} + +static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev) +{ + return edev->pdev; +} + /* * The struct is used to trace the registered EEH operation * callback functions. Actually, those operation callback @@ -70,19 +107,15 @@ struct eeh_ops { extern struct eeh_ops *eeh_ops; extern int eeh_subsystem_enabled; -/* Values for eeh_mode bits in device_node */ -#define EEH_MODE_SUPPORTED (1<<0) -#define EEH_MODE_NOCHECK (1<<1) -#define EEH_MODE_ISOLATED (1<<2) -#define EEH_MODE_RECOVERING (1<<3) -#define EEH_MODE_IRQ_DISABLED (1<<4) - /* * Max number of EEH freezes allowed before we consider the device * to be permanently disabled. */ #define EEH_MAX_ALLOWED_FREEZES 5 +void * __devinit eeh_dev_init(struct device_node *dn, void *data); +void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb); +void __init eeh_dev_phb_init(void); void __init eeh_init(void); #ifdef CONFIG_PPC_PSERIES int __init eeh_pseries_init(void); @@ -113,6 +146,16 @@ void eeh_remove_bus_device(struct pci_dev *); #define EEH_IO_ERROR_VALUE(size) (~0U >> ((4 - (size)) * 8)) #else /* !CONFIG_EEH */ + +static inline void *eeh_dev_init(struct device_node *dn, void *data) +{ + return NULL; +} + +static inline void eeh_dev_phb_init_dynamic(struct pci_controller *phb) { } + +static inline void eeh_dev_phb_init(void) { } + static inline void eeh_init(void) { } #ifdef CONFIG_PPC_PSERIES diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index e1612dfb4a930eca385a841bbbc967cb90c15b11..2049f2d00ffef60f0e7b1f9cfa5fc9cbd25a1758 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -21,12 +21,13 @@ #include #include #include +#include #include #include #include #include -#include +#include #ifdef CONFIG_PPC_OF_PLATFORM_PCI @@ -66,6 +67,9 @@ static int __devinit of_pci_phb_probe(struct platform_device *dev) /* Init pci_dn data structures */ pci_devs_phb_init_dynamic(phb); + /* Create EEH devices for the PHB */ + eeh_dev_phb_init_dynamic(phb); + /* Register devices with EEH */ #ifdef CONFIG_EEH if (dev->dev.of_node->child) diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 6cd8f0196b6d4401af0f91e368f67caa53cad133..517bd86bc3f020537617710daeb0e9e34a07da5b 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -275,6 +275,9 @@ void __init find_and_init_phbs(void) of_node_put(root); pci_devs_phb_init(); + /* Create EEH devices for all PHBs */ + eeh_dev_phb_init(); + /* * pci_probe_only and pci_assign_all_buses can be set via properties * in chosen. diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index ee873cf4fe46310fc2582ced00dcc9820ddf77bf..c222189f5bb230e1467103681ba0cb3923ebf275 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -6,7 +6,8 @@ obj-y := lpar.o hvCall.o nvram.o reconfig.o \ firmware.o power.o dlpar.o mobility.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.o eeh_pseries.o +obj-$(CONFIG_EEH) += eeh.o eeh_dev.o eeh_cache.o eeh_driver.o \ + eeh_event.o eeh_sysfs.o eeh_pseries.o obj-$(CONFIG_KEXEC) += kexec.o obj-$(CONFIG_PCI) += pci.o pci_dlpar.o obj-$(CONFIG_PSERIES_MSI) += msi.o diff --git a/arch/powerpc/platforms/pseries/eeh_dev.c b/arch/powerpc/platforms/pseries/eeh_dev.c new file mode 100644 index 0000000000000000000000000000000000000000..f3aed7dcae9528212d100357d0d2632935e64a5c --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_dev.c @@ -0,0 +1,102 @@ +/* + * The file intends to implement dynamic creation of EEH device, which will + * be bound with OF node and PCI device simutaneously. The EEH devices would + * be foundamental information for EEH core components to work proerly. Besides, + * We have to support multiple situations where dynamic creation of EEH device + * is required: + * + * 1) Before PCI emunation starts, we need create EEH devices according to the + * PCI sensitive OF nodes. + * 2) When PCI emunation is done, we need do the binding between PCI device and + * the associated EEH device. + * 3) DR (Dynamic Reconfiguration) would create PCI sensitive OF node. EEH device + * will be created while PCI sensitive OF node is detected from DR. + * 4) PCI hotplug needs redoing the binding between PCI device and EEH device. If + * PHB is newly inserted, we also need create EEH devices accordingly. + * + * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2012. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +/** + * eeh_dev_init - Create EEH device according to OF node + * @dn: device node + * @data: PHB + * + * It will create EEH device according to the given OF node. The function + * might be called by PCI emunation, DR, PHB hotplug. + */ +void * __devinit eeh_dev_init(struct device_node *dn, void *data) +{ + struct pci_controller *phb = data; + struct eeh_dev *edev; + + /* Allocate EEH device */ + edev = zalloc_maybe_bootmem(sizeof(*edev), GFP_KERNEL); + if (!edev) { + pr_warning("%s: out of memory\n", __func__); + return NULL; + } + + /* Associate EEH device with OF node */ + dn->edev = edev; + edev->dn = dn; + edev->phb = phb; + + return NULL; +} + +/** + * eeh_dev_phb_init_dynamic - Create EEH devices for devices included in PHB + * @phb: PHB + * + * Scan the PHB OF node and its child association, then create the + * EEH devices accordingly + */ +void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb) +{ + struct device_node *dn = phb->dn; + + /* EEH device for PHB */ + eeh_dev_init(dn, phb); + + /* EEH devices for children OF nodes */ + traverse_pci_devices(dn, eeh_dev_init, phb); +} + +/** + * eeh_dev_phb_init - Create EEH devices for devices included in existing PHBs + * + * Scan all the existing PHBs and create EEH devices for their OF + * nodes and their children OF nodes + */ +void __init eeh_dev_phb_init(void) +{ + struct pci_controller *phb, *tmp; + + list_for_each_entry_safe(phb, tmp, &hose_list, list_node) + eeh_dev_phb_init_dynamic(phb); +} diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 55d4ec1bd1ac6234531127c867749aa5bba3ca68..fbb21fc3080b4e130142b03ff2519d79e7a5f545 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -147,6 +147,9 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) pci_devs_phb_init_dynamic(phb); + /* Create EEH devices for the PHB */ + eeh_dev_phb_init_dynamic(phb); + if (dn->child) eeh_add_device_tree_early(dn); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 62b827626ca6137ee349f1f874dffca9fa0402ac..8f137af616afcbbe3f223d471f87c71c17ef3fae 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -260,8 +260,12 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act switch (action) { case PSERIES_RECONFIG_ADD: pci = np->parent->data; - if (pci) + if (pci) { update_dn_pci_info(np, pci->phb); + + /* Create EEH device for the OF node */ + eeh_dev_init(np, pci->phb); + } break; default: err = NOTIFY_DONE; diff --git a/include/linux/of.h b/include/linux/of.h index a75a831e2057f96e3519d100f988a584e18ac669..3e710d878085f1fae9a2ac40a5807be85ce25215 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -58,6 +58,9 @@ struct device_node { struct kref kref; unsigned long _flags; void *data; +#if defined(CONFIG_EEH) + struct eeh_dev *edev; +#endif #if defined(CONFIG_SPARC) char *path_component_name; unsigned int unique_id; @@ -72,6 +75,13 @@ struct of_phandle_args { uint32_t args[MAX_PHANDLE_ARGS]; }; +#if defined(CONFIG_EEH) +static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn) +{ + return dn->edev; +} +#endif + #if defined(CONFIG_SPARC) || !defined(CONFIG_OF) /* Dummy ref counting routines - to be implemented later */ static inline struct device_node *of_node_get(struct device_node *node) diff --git a/include/linux/pci.h b/include/linux/pci.h index a16b1df3deff0c47212f09667704ef369a08cf1c..cfeee2a6a5aef48a663814f4ad098cc1a1bfeb73 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1647,6 +1647,13 @@ static inline void pci_set_bus_of_node(struct pci_bus *bus) { } static inline void pci_release_bus_of_node(struct pci_bus *bus) { } #endif /* CONFIG_OF */ +#ifdef CONFIG_EEH +static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev) +{ + return pdev->dev.archdata.edev; +} +#endif + /** * pci_find_upstream_pcie_bridge - find upstream PCIe-to-PCI bridge of a device * @pdev: the PCI device