提交 ea71d9a6 编写于 作者: M Maxime Ripard

clocksource: sunxi: make use of CLKSRC_OF

Using CLKSRC_OF allows to remove the SoC specific sunxi_timer.h header,
and instead of using a custom init function in the machine definition
use the standard clocksource_of_init function.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
上级 04981731
config ARCH_SUNXI
bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
......
......@@ -10,6 +10,7 @@
* warranty of any kind, whether express or implied.
*/
#include <linux/clocksource.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -17,8 +18,8 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/sunxi_timer.h>
#include <linux/clk/sunxi.h>
#include <linux/irqchip/sunxi.h>
#include <asm/mach/arch.h>
......@@ -81,6 +82,12 @@ void __init sunxi_map_io(void)
iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc));
}
static void __init sunxi_timer_init(void)
{
sunxi_init_clocks();
clocksource_of_init();
}
static void __init sunxi_dt_init(void)
{
sunxi_setup_restart();
......@@ -100,6 +107,6 @@ DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
.init_irq = sunxi_init_irq,
.handle_irq = sunxi_handle_irq,
.restart = sunxi_restart,
.init_time = &sunxi_timer_init,
.init_time = sunxi_timer_init,
.dt_compat = sunxi_board_dt_compat,
MACHINE_END
......@@ -22,8 +22,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sunxi_timer.h>
#include <linux/clk/sunxi.h>
#define TIMER_IRQ_EN_REG 0x00
#define TIMER_IRQ_EN(val) (1 << val)
......@@ -98,23 +96,13 @@ static struct irqaction sunxi_timer_irq = {
.dev_id = &sunxi_clockevent,
};
static struct of_device_id sunxi_timer_dt_ids[] = {
{ .compatible = "allwinner,sunxi-timer" },
{ }
};
void __init sunxi_timer_init(void)
static void __init sunxi_timer_init(struct device_node *node)
{
struct device_node *node;
unsigned long rate = 0;
struct clk *clk;
int ret, irq;
u32 val;
node = of_find_matching_node(NULL, sunxi_timer_dt_ids);
if (!node)
panic("No sunxi timer node");
timer_base = of_iomap(node, 0);
if (!timer_base)
panic("Can't map registers");
......@@ -123,8 +111,6 @@ void __init sunxi_timer_init(void)
if (irq <= 0)
panic("Can't parse IRQ");
sunxi_init_clocks();
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
panic("Can't get timer clock");
......@@ -158,3 +144,5 @@ void __init sunxi_timer_init(void)
clockevents_config_and_register(&sunxi_clockevent, rate / TIMER_SCAL,
0x1, 0xff);
}
CLOCKSOURCE_OF_DECLARE(sunxi, "allwinner,sunxi-timer",
sunxi_timer_init);
/*
* Copyright 2012 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __SUNXI_TIMER_H
#define __SUNXI_TIMER_H
#include <asm/mach/time.h>
void sunxi_timer_init(void);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册