From e84cb5882da6d3e78964ca50fe0eade8fb8365ff Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Mon, 30 Jul 2018 13:31:34 +0100 Subject: [PATCH] arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage [ Upstream commit 480f58cdbe392d4387a2193b6131a277e0111dd0 ] According to the NanoPi-A64 schematics, DCDC1 is connected to a voltage rail named "VDD_SYS_3.3V". All users seem to expect 3.3V here: the Ethernet PHY, the uSD card slot, the camera interface and the GPIO pins on the headers. Fix up the voltage on the regulator to lift it up to 3.3V. Signed-off-by: Andre Przywara Acked-by: Maxime Ripard Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 98dbff19f5cc..5caba225b4f7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -125,9 +125,9 @@ ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { -- GitLab