提交 e3359fd5 编写于 作者: S Sreedhara DS 提交者: Matthew Garrett

intel_scu_ipc: Support Medfield processors

Changes to work on bothMmoorestown and Medfield
New pci id added for Medfield
Return type of ipc_data_readl chnaged from u8 to u32
Signed-off-by: NSreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
上级 14d10f0a
......@@ -151,7 +151,7 @@ static inline u8 ipc_data_readb(u32 offset) /* Read ipc byte data */
return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
}
static inline u8 ipc_data_readl(u32 offset) /* Read ipc u32 data */
static inline u32 ipc_data_readl(u32 offset) /* Read ipc u32 data */
{
return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
}
......@@ -181,18 +181,19 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
int nc;
u32 offset = 0;
u32 err = 0;
u8 cbuf[IPC_WWBUF_SIZE] = { '\0' };
u8 cbuf[IPC_WWBUF_SIZE] = { };
u32 *wbuf = (u32 *)&cbuf;
mutex_lock(&ipclock);
if (ipcdev.pdev == NULL) {
mutex_unlock(&ipclock);
return -ENODEV;
}
if (platform == 1) {
if (platform == PLATFORM_LANGWELL) {
/* Entry is 4 bytes for read/write, 5 bytes for read modify */
for (nc = 0; nc < count; nc++) {
for (nc = 0; nc < count; nc++, offset += 3) {
cbuf[offset] = addr[nc];
cbuf[offset + 1] = addr[nc] >> 8;
if (id != IPC_CMD_PCNTRL_R)
......@@ -201,33 +202,44 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
cbuf[offset + 3] = data[nc + 1];
offset += 1;
}
offset += 3;
}
for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
ipc_data_writel(wbuf[nc], offset); /* Write wbuff */
if (id != IPC_CMD_PCNTRL_M)
ipc_command((count*4) << 16 | id << 12 | 0 << 8 | op);
else
ipc_command((count*5) << 16 | id << 12 | 0 << 8 | op);
} else {
for (nc = 0, offset = 0; nc < count; nc++, offset += 2)
ipc_data_writel(addr[nc], offset); /* Write addresses */
if (id != IPC_CMD_PCNTRL_R) {
for (nc = 0; nc < count; nc++, offset++)
ipc_data_writel(data[nc], offset); /* Write data */
if (id == IPC_CMD_PCNTRL_M)
ipc_data_writel(data[nc + 1], offset); /* Mask value*/
}
for (nc = 0; nc < count; nc++, offset += 2) {
cbuf[offset] = addr[nc];
cbuf[offset + 1] = addr[nc] >> 8;
}
if (id != IPC_CMD_PCNTRL_M)
ipc_command((count * 3) << 16 | id << 12 | 0 << 8 | op);
else
ipc_command((count * 4) << 16 | id << 12 | 0 << 8 | op);
if (id == IPC_CMD_PCNTRL_R) {
for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
ipc_data_writel(wbuf[nc], offset);
ipc_command((count*2) << 16 | id << 12 | 0 << 8 | op);
} else if (id == IPC_CMD_PCNTRL_W) {
for (nc = 0; nc < count; nc++, offset += 1)
cbuf[offset] = data[nc];
for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
ipc_data_writel(wbuf[nc], offset);
ipc_command((count*3) << 16 | id << 12 | 0 << 8 | op);
} else if (id == IPC_CMD_PCNTRL_M) {
cbuf[offset] = data[0];
cbuf[offset + 1] = data[1];
ipc_data_writel(wbuf[0], 0); /* Write wbuff */
ipc_command(4 << 16 | id << 12 | 0 << 8 | op);
}
}
err = busy_loop();
if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
/* Workaround: values are read as 0 without memcpy_fromio */
memcpy_fromio(cbuf, ipcdev.ipc_base + IPC_READ_BUFFER, 16);
if (platform == 1) {
memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
if (platform == PLATFORM_LANGWELL) {
for (nc = 0, offset = 2; nc < count; nc++, offset += 3)
data[nc] = ipc_data_readb(offset);
} else {
......@@ -800,6 +812,7 @@ static void ipc_remove(struct pci_dev *pdev)
static const struct pci_device_id pci_ids[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080e)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)},
{ 0,}
};
MODULE_DEVICE_TABLE(pci, pci_ids);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册