diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index f81dd4acdc600810e196ad3ff15a9b271ea8bb36..2036d38fac477a83bdd616f2034dc51187558a72 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -1428,6 +1428,40 @@ static void ipath_update_pio_bufs(struct ipath_devdata *dd) spin_unlock_irqrestore(&ipath_pioavail_lock, flags); } +/* + * used to force update of pioavailshadow if we can't get a pio buffer. + * Needed primarily due to exitting freeze mode after recovering + * from errors. Done lazily, because it's safer (known to not + * be writing pio buffers). + */ +static void ipath_reset_availshadow(struct ipath_devdata *dd) +{ + int i, im; + unsigned long flags; + + spin_lock_irqsave(&ipath_pioavail_lock, flags); + for (i = 0; i < dd->ipath_pioavregs; i++) { + u64 val, oldval; + /* deal with 6110 chip bug on high register #s */ + im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ? + i ^ 1 : i; + val = le64_to_cpu(dd->ipath_pioavailregs_dma[im]); + /* + * busy out the buffers not in the kernel avail list, + * without changing the generation bits. + */ + oldval = dd->ipath_pioavailshadow[i]; + dd->ipath_pioavailshadow[i] = val | + ((~dd->ipath_pioavailkernel[i] << + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT) & + 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */ + if (oldval != dd->ipath_pioavailshadow[i]) + ipath_dbg("shadow[%d] was %Lx, now %lx\n", + i, oldval, dd->ipath_pioavailshadow[i]); + } + spin_unlock_irqrestore(&ipath_pioavail_lock, flags); +} + /** * ipath_setrcvhdrsize - set the receive header size * @dd: the infinipath device @@ -1482,9 +1516,12 @@ static noinline void no_pio_bufs(struct ipath_devdata *dd) */ ipath_stats.sps_nopiobufs++; if (!(++dd->ipath_consec_nopiobuf % 100000)) { - ipath_dbg("%u pio sends with no bufavail; dmacopy: " - "%llx %llx %llx %llx; shadow: %lx %lx %lx %lx\n", + ipath_force_pio_avail_update(dd); /* at start */ + ipath_dbg("%u tries no piobufavail ts%lx; dmacopy: " + "%llx %llx %llx %llx\n" + "ipath shadow: %lx %lx %lx %lx\n", dd->ipath_consec_nopiobuf, + (unsigned long)get_cycles(), (unsigned long long) le64_to_cpu(dma[0]), (unsigned long long) le64_to_cpu(dma[1]), (unsigned long long) le64_to_cpu(dma[2]), @@ -1496,14 +1533,17 @@ static noinline void no_pio_bufs(struct ipath_devdata *dd) */ if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > (sizeof(shadow[0]) * 4 * 4)) - ipath_dbg("2nd group: dmacopy: %llx %llx " - "%llx %llx; shadow: %lx %lx %lx %lx\n", + ipath_dbg("2nd group: dmacopy: " + "%llx %llx %llx %llx\n" + "ipath shadow: %lx %lx %lx %lx\n", (unsigned long long)le64_to_cpu(dma[4]), (unsigned long long)le64_to_cpu(dma[5]), (unsigned long long)le64_to_cpu(dma[6]), (unsigned long long)le64_to_cpu(dma[7]), - shadow[4], shadow[5], shadow[6], - shadow[7]); + shadow[4], shadow[5], shadow[6], shadow[7]); + + /* at end, so update likely happened */ + ipath_reset_availshadow(dd); } } @@ -1652,19 +1692,46 @@ void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start, unsigned len, int avail) { unsigned long flags; - unsigned end; + unsigned end, cnt = 0, next; /* There are two bits per send buffer (busy and generation) */ start *= 2; - len *= 2; - end = start + len; + end = start + len * 2; - /* Set or clear the generation bits. */ spin_lock_irqsave(&ipath_pioavail_lock, flags); + /* Set or clear the busy bit in the shadow. */ while (start < end) { if (avail) { - __clear_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT, - dd->ipath_pioavailshadow); + unsigned long dma; + int i, im; + /* + * the BUSY bit will never be set, because we disarm + * the user buffers before we hand them back to the + * kernel. We do have to make sure the generation + * bit is set correctly in shadow, since it could + * have changed many times while allocated to user. + * We can't use the bitmap functions on the full + * dma array because it is always little-endian, so + * we have to flip to host-order first. + * BITS_PER_LONG is slightly wrong, since it's + * always 64 bits per register in chip... + * We only work on 64 bit kernels, so that's OK. + */ + /* deal with 6110 chip bug on high register #s */ + i = start / BITS_PER_LONG; + im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ? + i ^ 1 : i; + __clear_bit(INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT + + start, dd->ipath_pioavailshadow); + dma = (unsigned long) le64_to_cpu( + dd->ipath_pioavailregs_dma[im]); + if (test_bit((INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT + + start) % BITS_PER_LONG, &dma)) + __set_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT + + start, dd->ipath_pioavailshadow); + else + __clear_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT + + start, dd->ipath_pioavailshadow); __set_bit(start, dd->ipath_pioavailkernel); } else { __set_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT, @@ -1673,7 +1740,44 @@ void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start, } start += 2; } + + if (dd->ipath_pioupd_thresh) { + end = 2 * (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k); + next = find_first_bit(dd->ipath_pioavailkernel, end); + while (next < end) { + cnt++; + next = find_next_bit(dd->ipath_pioavailkernel, end, + next + 1); + } + } spin_unlock_irqrestore(&ipath_pioavail_lock, flags); + + /* + * When moving buffers from kernel to user, if number assigned to + * the user is less than the pio update threshold, and threshold + * is supported (cnt was computed > 0), drop the update threshold + * so we update at least once per allocated number of buffers. + * In any case, if the kernel buffers are less than the threshold, + * drop the threshold. We don't bother increasing it, having once + * decreased it, since it would typically just cycle back and forth. + * If we don't decrease below buffers in use, we can wait a long + * time for an update, until some other context uses PIO buffers. + */ + if (!avail && len < cnt) + cnt = len; + if (cnt < dd->ipath_pioupd_thresh) { + dd->ipath_pioupd_thresh = cnt; + ipath_dbg("Decreased pio update threshold to %u\n", + dd->ipath_pioupd_thresh); + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); + dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK + << INFINIPATH_S_UPDTHRESH_SHIFT); + dd->ipath_sendctrl |= dd->ipath_pioupd_thresh + << INFINIPATH_S_UPDTHRESH_SHIFT; + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, + dd->ipath_sendctrl); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); + } } /** diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 8b1752202e78a8d69c09579428a339df283bd55c..3295177c937e3ef530cfa63c1affaf956db8160b 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -173,47 +173,25 @@ static int ipath_get_base_info(struct file *fp, (void *) dd->ipath_statusp - (void *) dd->ipath_pioavailregs_dma; if (!shared) { - kinfo->spi_piocnt = dd->ipath_pbufsport; + kinfo->spi_piocnt = pd->port_piocnt; kinfo->spi_piobufbase = (u64) pd->port_piobufs; kinfo->__spi_uregbase = (u64) dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port; } else if (master) { - kinfo->spi_piocnt = (dd->ipath_pbufsport / subport_cnt) + - (dd->ipath_pbufsport % subport_cnt); + kinfo->spi_piocnt = (pd->port_piocnt / subport_cnt) + + (pd->port_piocnt % subport_cnt); /* Master's PIO buffers are after all the slave's */ kinfo->spi_piobufbase = (u64) pd->port_piobufs + dd->ipath_palign * - (dd->ipath_pbufsport - kinfo->spi_piocnt); + (pd->port_piocnt - kinfo->spi_piocnt); } else { unsigned slave = subport_fp(fp) - 1; - kinfo->spi_piocnt = dd->ipath_pbufsport / subport_cnt; + kinfo->spi_piocnt = pd->port_piocnt / subport_cnt; kinfo->spi_piobufbase = (u64) pd->port_piobufs + dd->ipath_palign * kinfo->spi_piocnt * slave; } - /* - * Set the PIO avail update threshold to no larger - * than the number of buffers per process. Note that - * we decrease it here, but won't ever increase it. - */ - if (dd->ipath_pioupd_thresh && - kinfo->spi_piocnt < dd->ipath_pioupd_thresh) { - unsigned long flags; - - dd->ipath_pioupd_thresh = kinfo->spi_piocnt; - ipath_dbg("Decreased pio update threshold to %u\n", - dd->ipath_pioupd_thresh); - spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); - dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK - << INFINIPATH_S_UPDTHRESH_SHIFT); - dd->ipath_sendctrl |= dd->ipath_pioupd_thresh - << INFINIPATH_S_UPDTHRESH_SHIFT; - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - dd->ipath_sendctrl); - spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); - } - if (shared) { kinfo->spi_port_uregbase = (u64) dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port; @@ -1309,19 +1287,19 @@ static int ipath_mmap(struct file *fp, struct vm_area_struct *vma) ureg = dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port; if (!pd->port_subport_cnt) { /* port is not shared */ - piocnt = dd->ipath_pbufsport; + piocnt = pd->port_piocnt; piobufs = pd->port_piobufs; } else if (!subport_fp(fp)) { /* caller is the master */ - piocnt = (dd->ipath_pbufsport / pd->port_subport_cnt) + - (dd->ipath_pbufsport % pd->port_subport_cnt); + piocnt = (pd->port_piocnt / pd->port_subport_cnt) + + (pd->port_piocnt % pd->port_subport_cnt); piobufs = pd->port_piobufs + - dd->ipath_palign * (dd->ipath_pbufsport - piocnt); + dd->ipath_palign * (pd->port_piocnt - piocnt); } else { unsigned slave = subport_fp(fp) - 1; /* caller is a slave */ - piocnt = dd->ipath_pbufsport / pd->port_subport_cnt; + piocnt = pd->port_piocnt / pd->port_subport_cnt; piobufs = pd->port_piobufs + dd->ipath_palign * piocnt * slave; } @@ -1633,9 +1611,6 @@ static int try_alloc_port(struct ipath_devdata *dd, int port, port_fp(fp) = pd; pd->port_pid = current->pid; strncpy(pd->port_comm, current->comm, sizeof(pd->port_comm)); - ipath_chg_pioavailkernel(dd, - dd->ipath_pbufsport * (pd->port_port - 1), - dd->ipath_pbufsport, 0); ipath_stats.sps_ports++; ret = 0; } else @@ -1938,11 +1913,25 @@ static int ipath_do_user_init(struct file *fp, /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */ + /* some ports may get extra buffers, calculate that here */ + if (pd->port_port <= dd->ipath_ports_extrabuf) + pd->port_piocnt = dd->ipath_pbufsport + 1; + else + pd->port_piocnt = dd->ipath_pbufsport; + /* for right now, kernel piobufs are at end, so port 1 is at 0 */ + if (pd->port_port <= dd->ipath_ports_extrabuf) + pd->port_pio_base = (dd->ipath_pbufsport + 1) + * (pd->port_port - 1); + else + pd->port_pio_base = dd->ipath_ports_extrabuf + + dd->ipath_pbufsport * (pd->port_port - 1); pd->port_piobufs = dd->ipath_piobufbase + - dd->ipath_pbufsport * (pd->port_port - 1) * dd->ipath_palign; - ipath_cdbg(VERBOSE, "Set base of piobufs for port %u to 0x%x\n", - pd->port_port, pd->port_piobufs); + pd->port_pio_base * dd->ipath_palign; + ipath_cdbg(VERBOSE, "piobuf base for port %u is 0x%x, piocnt %u," + " first pio %u\n", pd->port_port, pd->port_piobufs, + pd->port_piocnt, pd->port_pio_base); + ipath_chg_pioavailkernel(dd, pd->port_pio_base, pd->port_piocnt, 0); /* * Now allocate the rcvhdr Q and eager TIDs; skip the TID @@ -2107,7 +2096,6 @@ static int ipath_close(struct inode *in, struct file *fp) } if (dd->ipath_kregbase) { - int i; /* atomically clear receive enable port and intr avail. */ clear_bit(dd->ipath_r_portenable_shift + port, &dd->ipath_rcvctrl); @@ -2136,9 +2124,9 @@ static int ipath_close(struct inode *in, struct file *fp) ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr, pd->port_port, dd->ipath_dummy_hdrq_phys); - i = dd->ipath_pbufsport * (port - 1); - ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport); - ipath_chg_pioavailkernel(dd, i, dd->ipath_pbufsport, 1); + ipath_disarm_piobufs(dd, pd->port_pio_base, pd->port_piocnt); + ipath_chg_pioavailkernel(dd, pd->port_pio_base, + pd->port_piocnt, 1); dd->ipath_f_clear_tids(dd, pd->port_port); diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c index 5f693de66542b866c6e5418dfc7cb9cb69a154f0..8eee7830f042b3d05b20fa4955295905294378a3 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c @@ -595,7 +595,7 @@ static void ipath_7220_txe_recover(struct ipath_devdata *dd) dev_info(&dd->pcidev->dev, "Recovering from TXE PIO parity error\n"); - ipath_disarm_senderrbufs(dd, 1); + ipath_disarm_senderrbufs(dd); } @@ -675,10 +675,8 @@ static void ipath_7220_handle_hwerrors(struct ipath_devdata *dd, char *msg, ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control); if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) { /* - * Parity errors in send memory are recoverable, - * just cancel the send (if indicated in * sendbuffererror), - * count the occurrence, unfreeze (if no other handled - * hardware error bits are set), and continue. + * Parity errors in send memory are recoverable by h/w + * just do housekeeping, exit freeze mode and continue. */ if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) @@ -687,13 +685,6 @@ static void ipath_7220_handle_hwerrors(struct ipath_devdata *dd, char *msg, hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT); - if (!hwerrs) { - /* else leave in freeze mode */ - ipath_write_kreg(dd, - dd->ipath_kregs->kr_control, - dd->ipath_control); - goto bail; - } } if (hwerrs) { /* @@ -723,8 +714,8 @@ static void ipath_7220_handle_hwerrors(struct ipath_devdata *dd, char *msg, *dd->ipath_statusp |= IPATH_STATUS_HWERROR; dd->ipath_flags &= ~IPATH_INITTED; } else { - ipath_dbg("Clearing freezemode on ignored hardware " - "error\n"); + ipath_dbg("Clearing freezemode on ignored or " + "recovered hardware error\n"); ipath_clear_freeze(dd); } } @@ -1967,7 +1958,7 @@ static void ipath_7220_config_ports(struct ipath_devdata *dd, ushort cfgports) dd->ipath_rcvctrl); dd->ipath_p0_rcvegrcnt = 2048; /* always */ if (dd->ipath_flags & IPATH_HAS_SEND_DMA) - dd->ipath_pioreserved = 1; /* reserve a buffer */ + dd->ipath_pioreserved = 3; /* kpiobufs used for PIO */ } diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index 27dd89476660846c723f60518828d4692206f213..3e5baa43fc822468b232819f62716a2aba1d8c1d 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -41,7 +41,7 @@ /* * min buffers we want to have per port, after driver */ -#define IPATH_MIN_USER_PORT_BUFCNT 8 +#define IPATH_MIN_USER_PORT_BUFCNT 7 /* * Number of ports we are configured to use (to allow for more pio @@ -54,13 +54,9 @@ MODULE_PARM_DESC(cfgports, "Set max number of ports to use"); /* * Number of buffers reserved for driver (verbs and layered drivers.) - * Reserved at end of buffer list. Initialized based on - * number of PIO buffers if not set via module interface. + * Initialized based on number of PIO buffers if not set via module interface. * The problem with this is that it's global, but we'll use different - * numbers for different chip types. So the default value is not - * very useful. I've redefined it for the 1.3 release so that it's - * zero unless set by the user to something else, in which case we - * try to respect it. + * numbers for different chip types. */ static ushort ipath_kpiobufs; @@ -546,9 +542,12 @@ static void enable_chip(struct ipath_devdata *dd, int reinit) pioavail = dd->ipath_pioavailregs_dma[i ^ 1]; else pioavail = dd->ipath_pioavailregs_dma[i]; - dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail) | - (~dd->ipath_pioavailkernel[i] << - INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT); + /* + * don't need to worry about ipath_pioavailkernel here + * because we will call ipath_chg_pioavailkernel() later + * in initialization, to busy out buffers as needed + */ + dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail); } /* can get counters, stats, etc. */ dd->ipath_flags |= IPATH_PRESENT; @@ -708,12 +707,11 @@ static void verify_interrupt(unsigned long opaque) int ipath_init_chip(struct ipath_devdata *dd, int reinit) { int ret = 0; - u32 val32, kpiobufs; + u32 kpiobufs, defkbufs; u32 piobufs, uports; u64 val; struct ipath_portdata *pd; gfp_t gfp_flags = GFP_USER | __GFP_COMP; - unsigned long flags; ret = init_housekeeping(dd, reinit); if (ret) @@ -753,69 +751,52 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit) dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / (sizeof(u64) * BITS_PER_BYTE / 2); uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0; - if (ipath_kpiobufs == 0) { - /* not set by user (this is default) */ - if (piobufs > 144) - kpiobufs = 32; - else - kpiobufs = 16; - } + if (piobufs > 144) + defkbufs = 32 + dd->ipath_pioreserved; else - kpiobufs = ipath_kpiobufs; + defkbufs = 16 + dd->ipath_pioreserved; - if (kpiobufs + (uports * IPATH_MIN_USER_PORT_BUFCNT) > piobufs) { + if (ipath_kpiobufs && (ipath_kpiobufs + + (uports * IPATH_MIN_USER_PORT_BUFCNT)) > piobufs) { int i = (int) piobufs - (int) (uports * IPATH_MIN_USER_PORT_BUFCNT); if (i < 1) i = 1; dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of " "%d for kernel leaves too few for %d user ports " - "(%d each); using %u\n", kpiobufs, + "(%d each); using %u\n", ipath_kpiobufs, piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i); /* * shouldn't change ipath_kpiobufs, because could be * different for different devices... */ kpiobufs = i; - } + } else if (ipath_kpiobufs) + kpiobufs = ipath_kpiobufs; + else + kpiobufs = defkbufs; dd->ipath_lastport_piobuf = piobufs - kpiobufs; dd->ipath_pbufsport = uports ? dd->ipath_lastport_piobuf / uports : 0; - val32 = dd->ipath_lastport_piobuf - (dd->ipath_pbufsport * uports); - if (val32 > 0) { - ipath_dbg("allocating %u pbufs/port leaves %u unused, " - "add to kernel\n", dd->ipath_pbufsport, val32); - dd->ipath_lastport_piobuf -= val32; - kpiobufs += val32; - ipath_dbg("%u pbufs/port leaves %u unused, add to kernel\n", - dd->ipath_pbufsport, val32); - } + /* if not an even divisor, some user ports get extra buffers */ + dd->ipath_ports_extrabuf = dd->ipath_lastport_piobuf - + (dd->ipath_pbufsport * uports); + if (dd->ipath_ports_extrabuf) + ipath_dbg("%u pbufs/port leaves some unused, add 1 buffer to " + "ports <= %u\n", dd->ipath_pbufsport, + dd->ipath_ports_extrabuf); dd->ipath_lastpioindex = 0; dd->ipath_lastpioindexl = dd->ipath_piobcnt2k; - ipath_chg_pioavailkernel(dd, 0, piobufs, 1); + /* ipath_pioavailshadow initialized earlier */ ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u " "each for %u user ports\n", kpiobufs, piobufs, dd->ipath_pbufsport, uports); - if (dd->ipath_pioupd_thresh) { - if (dd->ipath_pbufsport < dd->ipath_pioupd_thresh) - dd->ipath_pioupd_thresh = dd->ipath_pbufsport; - if (kpiobufs < dd->ipath_pioupd_thresh) - dd->ipath_pioupd_thresh = kpiobufs; - } - ret = dd->ipath_f_early_init(dd); if (ret) { ipath_dev_err(dd, "Early initialization failure\n"); goto done; } - /* - * Cancel any possible active sends from early driver load. - * Follows early_init because some chips have to initialize - * PIO buffers in early_init to avoid false parity errors. - */ - ipath_cancel_sends(dd, 0); - /* * Early_init sets rcvhdrentsize and rcvhdrsize, so this must be * done after early_init. @@ -836,6 +817,7 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit) ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr, dd->ipath_pioavailregs_phys); + /* * this is to detect s/w errors, which the h/w works around by * ignoring the low 6 bits of address, if it wasn't aligned. @@ -862,12 +844,6 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit) ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED); ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL); - spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); - dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE; - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); - ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); - /* * before error clears, since we expect serdes pll errors during * this, the first time after reset @@ -940,6 +916,19 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit) else enable_chip(dd, reinit); + /* after enable_chip, so pioavailshadow setup */ + ipath_chg_pioavailkernel(dd, 0, piobufs, 1); + + /* + * Cancel any possible active sends from early driver load. + * Follows early_init because some chips have to initialize + * PIO buffers in early_init to avoid false parity errors. + * After enable and ipath_chg_pioavailkernel so we can safely + * enable pioavail updates and PIOENABLE; packets are now + * ready to go out. + */ + ipath_cancel_sends(dd, 1); + if (!reinit) { /* * Used when we close a port, for DMA already in flight diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index 45c4c068ab1eec0e936c4263d8b93b7a9514f31e..26900b3b7a4ee1bcef2fe064a1a8148900128fae 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -38,42 +38,12 @@ #include "ipath_verbs.h" #include "ipath_common.h" -/* - * clear (write) a pio buffer, to clear a parity error. This routine - * should only be called when in freeze mode, and the buffer should be - * canceled afterwards. - */ -static void ipath_clrpiobuf(struct ipath_devdata *dd, u32 pnum) -{ - u32 __iomem *pbuf; - u32 dwcnt; /* dword count to write */ - if (pnum < dd->ipath_piobcnt2k) { - pbuf = (u32 __iomem *) (dd->ipath_pio2kbase + pnum * - dd->ipath_palign); - dwcnt = dd->ipath_piosize2k >> 2; - } - else { - pbuf = (u32 __iomem *) (dd->ipath_pio4kbase + - (pnum - dd->ipath_piobcnt2k) * dd->ipath_4kalign); - dwcnt = dd->ipath_piosize4k >> 2; - } - dev_info(&dd->pcidev->dev, - "Rewrite PIO buffer %u, to recover from parity error\n", - pnum); - - /* no flush required, since already in freeze */ - writel(dwcnt + 1, pbuf); - while (--dwcnt) - writel(0, pbuf++); -} /* * Called when we might have an error that is specific to a particular * PIO buffer, and may need to cancel that buffer, so it can be re-used. - * If rewrite is true, and bits are set in the sendbufferror registers, - * we'll write to the buffer, for error recovery on parity errors. */ -void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite) +void ipath_disarm_senderrbufs(struct ipath_devdata *dd) { u32 piobcnt; unsigned long sbuf[4]; @@ -109,11 +79,8 @@ void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite) } for (i = 0; i < piobcnt; i++) - if (test_bit(i, sbuf)) { - if (rewrite) - ipath_clrpiobuf(dd, i); + if (test_bit(i, sbuf)) ipath_disarm_piobufs(dd, i, 1); - } /* ignore armlaunch errs for a bit */ dd->ipath_lastcancel = jiffies+3; } @@ -164,7 +131,7 @@ static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs) { u64 ignore_this_time = 0; - ipath_disarm_senderrbufs(dd, 0); + ipath_disarm_senderrbufs(dd); if ((errs & E_SUM_LINK_PKTERRS) && !(dd->ipath_flags & IPATH_LINKACTIVE)) { /* @@ -909,8 +876,8 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs) * processes (causing armlaunch), send errors due to going into freeze mode, * etc., and try to avoid causing extra interrupts while doing so. * Forcibly update the in-memory pioavail register copies after cleanup - * because the chip won't do it for anything changing while in freeze mode - * (we don't want to wait for the next pio buffer state change). + * because the chip won't do it while in freeze mode (the register values + * themselves are kept correct). * Make sure that we don't lose any important interrupts by using the chip * feature that says that writing 0 to a bit in *clear that is set in * *status will cause an interrupt to be generated again (if allowed by @@ -918,47 +885,22 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs) */ void ipath_clear_freeze(struct ipath_devdata *dd) { - int i, im; - u64 val; - /* disable error interrupts, to avoid confusion */ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, 0ULL); /* also disable interrupts; errormask is sometimes overwriten */ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL); - /* - * clear all sends, because they have may been - * completed by usercode while in freeze mode, and - * therefore would not be sent, and eventually - * might cause the process to run out of bufs - */ ipath_cancel_sends(dd, 1); + + /* clear the freeze, and be sure chip saw it */ ipath_write_kreg(dd, dd->ipath_kregs->kr_control, dd->ipath_control); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); - /* - * ensure pio avail updates continue (because the update - * won't have happened from cancel_sends because we were - * still in freeze - */ + /* force in-memory update now we are out of freeze */ ipath_force_pio_avail_update(dd); - /* - * We just enabled pioavailupdate, so dma copy is almost certainly - * not yet right, so read the registers directly. Similar to init - */ - for (i = 0; i < dd->ipath_pioavregs; i++) { - /* deal with 6110 chip bug */ - im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ? - i ^ 1 : i; - val = ipath_read_kreg64(dd, (0x1000 / sizeof(u64)) + im); - dd->ipath_pioavailregs_dma[i] = cpu_to_le64(val); - dd->ipath_pioavailshadow[i] = val | - (~dd->ipath_pioavailkernel[i] << - INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT); - } - /* * force new interrupt if any hwerr, error or interrupt bits are * still set, and clear "safe" send packet errors related to freeze @@ -1316,10 +1258,8 @@ irqreturn_t ipath_intr(int irq, void *data) ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); - if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA)) - handle_layer_pioavail(dd); - else - ipath_dbg("unexpected BUFAVAIL intr\n"); + /* always process; sdma verbs uses PIO for acks and VL15 */ + handle_layer_pioavail(dd); } ret = IRQ_HANDLED; diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 202337ae90dc68621dc89feefe931dbb82982c37..02b24a340599525d9f423a74ac4ccf2f01d9e62d 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -117,6 +117,10 @@ struct ipath_portdata { u16 port_subport_cnt; /* non-zero if port is being shared. */ u16 port_subport_id; + /* number of pio bufs for this port (all procs, if shared) */ + u32 port_piocnt; + /* first pio buffer for this port */ + u32 port_pio_base; /* chip offset of PIO buffers for this port */ u32 port_piobufs; /* how many alloc_pages() chunks in port_rcvegrbuf_pages */ @@ -384,6 +388,8 @@ struct ipath_devdata { u32 ipath_lastrpkts; /* pio bufs allocated per port */ u32 ipath_pbufsport; + /* if remainder on bufs/port, ports < extrabuf get 1 extra */ + u32 ipath_ports_extrabuf; u32 ipath_pioupd_thresh; /* update threshold, some chips */ /* * number of ports configured as max; zero is set to number chip @@ -1011,7 +1017,7 @@ void ipath_get_eeprom_info(struct ipath_devdata *); int ipath_update_eeprom_log(struct ipath_devdata *dd); void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr); u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg); -void ipath_disarm_senderrbufs(struct ipath_devdata *, int); +void ipath_disarm_senderrbufs(struct ipath_devdata *); void ipath_force_pio_avail_update(struct ipath_devdata *); void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev); diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index 8ac5c1d82ccdb9cdb49b1b01db264c38e9f04fd0..9e3fe61cbd08ea0f45bd9a988871e15d6ffd1baa 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -481,9 +481,10 @@ static void ipath_ruc_loopback(struct ipath_qp *sqp) wake_up(&qp->wait); } -static void want_buffer(struct ipath_devdata *dd) +static void want_buffer(struct ipath_devdata *dd, struct ipath_qp *qp) { - if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA)) { + if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA) || + qp->ibqp.qp_type == IB_QPT_SMI) { unsigned long flags; spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); @@ -519,7 +520,7 @@ static void ipath_no_bufs_available(struct ipath_qp *qp, spin_lock_irqsave(&dev->pending_lock, flags); list_add_tail(&qp->piowait, &dev->piowait); spin_unlock_irqrestore(&dev->pending_lock, flags); - want_buffer(dev->dd); + want_buffer(dev->dd, qp); dev->n_piowait++; } diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c index 1974df7a9f789e6e19568876f59c9a4c5f5783ae..0d07682c7310f8da67ae087817c27bb1fe7e64e1 100644 --- a/drivers/infiniband/hw/ipath/ipath_sdma.c +++ b/drivers/infiniband/hw/ipath/ipath_sdma.c @@ -449,16 +449,19 @@ int setup_sdma(struct ipath_devdata *dd) ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr, dd->ipath_sdma_head_phys); - /* Reserve all the former "kernel" piobufs */ - n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - dd->ipath_pioreserved; - for (i = dd->ipath_lastport_piobuf; i < n; ++i) { + /* + * Reserve all the former "kernel" piobufs, using high number range + * so we get as many 4K buffers as possible + */ + n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k; + i = dd->ipath_lastport_piobuf + dd->ipath_pioreserved; + ipath_chg_pioavailkernel(dd, i, n - i , 0); + for (; i < n; ++i) { unsigned word = i / 64; unsigned bit = i & 63; BUG_ON(word >= 3); senddmabufmask[word] |= 1ULL << bit; } - ipath_chg_pioavailkernel(dd, dd->ipath_lastport_piobuf, - n - dd->ipath_lastport_piobuf, 0); ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0, senddmabufmask[0]); ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1,