diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 790352f937004fde97c2430c67d0823fc382d808..35d16bd2760b745d1fa6c8d97093a8eb4a381b3e 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -303,7 +303,6 @@ config PPC_EARLY_DEBUG_OPAL_VTERMNO This correspond to which /dev/hvcN you want to use for early debug. - On OPAL v1 (takeover) this should always be 0 On OPAL v2, this will be 0 for network console and 1 or 2 for the machine built-in serial ports. diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 460018889ba9b228c723855557ed338d1b5a6847..0da1dbd42e02123c44007347fd0d4f89e2796b14 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -12,27 +12,7 @@ #ifndef __OPAL_H #define __OPAL_H -/****** Takeover interface ********/ - -/* PAPR H-Call used to querty the HAL existence and/or instanciate - * it from within pHyp (tech preview only). - * - * This is exclusively used in prom_init.c - */ - #ifndef __ASSEMBLY__ - -struct opal_takeover_args { - u64 k_image; /* r4 */ - u64 k_size; /* r5 */ - u64 k_entry; /* r6 */ - u64 k_entry2; /* r7 */ - u64 hal_addr; /* r8 */ - u64 rd_image; /* r9 */ - u64 rd_size; /* r10 */ - u64 rd_loc; /* r11 */ -}; - /* * SG entry * @@ -55,15 +35,6 @@ struct opal_sg_list { /* We calculate number of sg entries based on PAGE_SIZE */ #define SG_ENTRIES_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct opal_sg_entry)) -extern long opal_query_takeover(u64 *hal_size, u64 *hal_align); - -extern long opal_do_takeover(struct opal_takeover_args *args); - -struct rtas_args; -extern int opal_enter_rtas(struct rtas_args *args, - unsigned long data, - unsigned long entry); - #endif /* __ASSEMBLY__ */ /****** OPAL APIs ******/ diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 613a860a203c9665287910d4218498de40432973..b694b0730971e1eba7a5ba4cebe7b91d3acf9279 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -662,13 +662,6 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL); #endif - /* Pre-initialize the cmd_line with the content of boot_commmand_line, - * which will be empty except when the content of the variable has - * been overriden by a bootloading mechanism. This happens typically - * with HAL takeover - */ - strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); - /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 078145acf7fb867dca6278f776a935ba0b2ecf25..1a85d8f96739550a6a88bc6ad94484a1431955cd 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1268,201 +1268,6 @@ static u64 __initdata prom_opal_base; static u64 __initdata prom_opal_entry; #endif -#ifdef __BIG_ENDIAN__ -/* XXX Don't change this structure without updating opal-takeover.S */ -static struct opal_secondary_data { - s64 ack; /* 0 */ - u64 go; /* 8 */ - struct opal_takeover_args args; /* 16 */ -} opal_secondary_data; - -static u64 __initdata prom_opal_align; -static u64 __initdata prom_opal_size; -static int __initdata prom_rtas_start_cpu; -static u64 __initdata prom_rtas_data; -static u64 __initdata prom_rtas_entry; - -extern char opal_secondary_entry; - -static void __init prom_query_opal(void) -{ - long rc; - - /* We must not query for OPAL presence on a machine that - * supports TNK takeover (970 blades), as this uses the same - * h-call with different arguments and will crash - */ - if (PHANDLE_VALID(call_prom("finddevice", 1, 1, - ADDR("/tnk-memory-map")))) { - prom_printf("TNK takeover detected, skipping OPAL check\n"); - return; - } - - prom_printf("Querying for OPAL presence... "); - - rc = opal_query_takeover(&prom_opal_size, - &prom_opal_align); - prom_debug("(rc = %ld) ", rc); - if (rc != 0) { - prom_printf("not there.\n"); - return; - } - of_platform = PLATFORM_OPAL; - prom_printf(" there !\n"); - prom_debug(" opal_size = 0x%lx\n", prom_opal_size); - prom_debug(" opal_align = 0x%lx\n", prom_opal_align); - if (prom_opal_align < 0x10000) - prom_opal_align = 0x10000; -} - -static int __init prom_rtas_call(int token, int nargs, int nret, - int *outputs, ...) -{ - struct rtas_args rtas_args; - va_list list; - int i; - - rtas_args.token = token; - rtas_args.nargs = nargs; - rtas_args.nret = nret; - rtas_args.rets = (rtas_arg_t *)&(rtas_args.args[nargs]); - va_start(list, outputs); - for (i = 0; i < nargs; ++i) - rtas_args.args[i] = va_arg(list, rtas_arg_t); - va_end(list); - - for (i = 0; i < nret; ++i) - rtas_args.rets[i] = 0; - - opal_enter_rtas(&rtas_args, prom_rtas_data, - prom_rtas_entry); - - if (nret > 1 && outputs != NULL) - for (i = 0; i < nret-1; ++i) - outputs[i] = rtas_args.rets[i+1]; - return (nret > 0)? rtas_args.rets[0]: 0; -} - -static void __init prom_opal_hold_cpus(void) -{ - int i, cnt, cpu, rc; - long j; - phandle node; - char type[64]; - u32 servers[8]; - void *entry = (unsigned long *)&opal_secondary_entry; - struct opal_secondary_data *data = &opal_secondary_data; - - prom_debug("prom_opal_hold_cpus: start...\n"); - prom_debug(" - entry = 0x%x\n", entry); - prom_debug(" - data = 0x%x\n", data); - - data->ack = -1; - data->go = 0; - - /* look for cpus */ - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, "cpu") != 0) - continue; - - /* Skip non-configured cpus. */ - if (prom_getprop(node, "status", type, sizeof(type)) > 0) - if (strcmp(type, "okay") != 0) - continue; - - cnt = prom_getprop(node, "ibm,ppc-interrupt-server#s", servers, - sizeof(servers)); - if (cnt == PROM_ERROR) - break; - cnt >>= 2; - for (i = 0; i < cnt; i++) { - cpu = servers[i]; - prom_debug("CPU %d ... ", cpu); - if (cpu == prom.cpu) { - prom_debug("booted !\n"); - continue; - } - prom_debug("starting ... "); - - /* Init the acknowledge var which will be reset by - * the secondary cpu when it awakens from its OF - * spinloop. - */ - data->ack = -1; - rc = prom_rtas_call(prom_rtas_start_cpu, 3, 1, - NULL, cpu, entry, data); - prom_debug("rtas rc=%d ...", rc); - - for (j = 0; j < 100000000 && data->ack == -1; j++) { - HMT_low(); - mb(); - } - HMT_medium(); - if (data->ack != -1) - prom_debug("done, PIR=0x%x\n", data->ack); - else - prom_debug("timeout !\n"); - } - } - prom_debug("prom_opal_hold_cpus: end...\n"); -} - -static void __init prom_opal_takeover(void) -{ - struct opal_secondary_data *data = &opal_secondary_data; - struct opal_takeover_args *args = &data->args; - u64 align = prom_opal_align; - u64 top_addr, opal_addr; - - args->k_image = (u64)_stext; - args->k_size = _end - _stext; - args->k_entry = 0; - args->k_entry2 = 0x60; - - top_addr = _ALIGN_UP(args->k_size, align); - - if (prom_initrd_start != 0) { - args->rd_image = prom_initrd_start; - args->rd_size = prom_initrd_end - args->rd_image; - args->rd_loc = top_addr; - top_addr = _ALIGN_UP(args->rd_loc + args->rd_size, align); - } - - /* Pickup an address for the HAL. We want to go really high - * up to avoid problem with future kexecs. On the other hand - * we don't want to be all over the TCEs on P5IOC2 machines - * which are going to be up there too. We assume the machine - * has plenty of memory, and we ask for the HAL for now to - * be just below the 1G point, or above the initrd - */ - opal_addr = _ALIGN_DOWN(0x40000000 - prom_opal_size, align); - if (opal_addr < top_addr) - opal_addr = top_addr; - args->hal_addr = opal_addr; - - /* Copy the command line to the kernel image */ - strlcpy(boot_command_line, prom_cmd_line, - COMMAND_LINE_SIZE); - - prom_debug(" k_image = 0x%lx\n", args->k_image); - prom_debug(" k_size = 0x%lx\n", args->k_size); - prom_debug(" k_entry = 0x%lx\n", args->k_entry); - prom_debug(" k_entry2 = 0x%lx\n", args->k_entry2); - prom_debug(" hal_addr = 0x%lx\n", args->hal_addr); - prom_debug(" rd_image = 0x%lx\n", args->rd_image); - prom_debug(" rd_size = 0x%lx\n", args->rd_size); - prom_debug(" rd_loc = 0x%lx\n", args->rd_loc); - prom_printf("Performing OPAL takeover,this can take a few minutes..\n"); - prom_close_stdin(); - mb(); - data->go = 1; - for (;;) - opal_do_takeover(args); -} -#endif /* __BIG_ENDIAN__ */ - /* * Allocate room for and instantiate OPAL */ @@ -1597,12 +1402,6 @@ static void __init prom_instantiate_rtas(void) &val, sizeof(val)) != PROM_ERROR) rtas_has_query_cpu_stopped = true; -#if defined(CONFIG_PPC_POWERNV) && defined(__BIG_ENDIAN__) - /* PowerVN takeover hack */ - prom_rtas_data = base; - prom_rtas_entry = entry; - prom_getprop(rtas_node, "start-cpu", &prom_rtas_start_cpu, 4); -#endif prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); prom_debug("rtas size = 0x%x\n", (long)size); @@ -3027,16 +2826,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, prom_instantiate_rtas(); #ifdef CONFIG_PPC_POWERNV -#ifdef __BIG_ENDIAN__ - /* Detect HAL and try instanciating it & doing takeover */ - if (of_platform == PLATFORM_PSERIES_LPAR) { - prom_query_opal(); - if (of_platform == PLATFORM_OPAL) { - prom_opal_hold_cpus(); - prom_opal_takeover(); - } - } else -#endif /* __BIG_ENDIAN__ */ if (of_platform == PLATFORM_OPAL) prom_instantiate_opal(); #endif /* CONFIG_PPC_POWERNV */ diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 77aa1e95e9046d39908048d8a711c44c83841415..fe8e54b9ef7db5bddd01b3917741cadbc0746fa3 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -21,9 +21,7 @@ _end enter_prom memcpy memset reloc_offset __secondary_hold __secondary_hold_acknowledge __secondary_hold_spinloop __start strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224 reloc_got2 kernstart_addr memstart_addr linux_banner _stext -opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry -boot_command_line __prom_init_toc_start __prom_init_toc_end -btext_setup_display TOC." +__prom_init_toc_start __prom_init_toc_end btext_setup_display TOC." NM="$1" OBJ="$2" diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index d55891f89a2ce2bf0c14b22b47564760dd16abf0..4ad227d04c1ab18a8d1b0eba4fbaab7d1726c795 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -1,4 +1,4 @@ -obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o +obj-y += setup.o opal-wrappers.o opal.o opal-async.o obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o obj-y += opal-msglog.o diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S deleted file mode 100644 index 11a3169ee583635607a41406a7a571872cee97d9..0000000000000000000000000000000000000000 --- a/arch/powerpc/platforms/powernv/opal-takeover.S +++ /dev/null @@ -1,140 +0,0 @@ -/* - * PowerNV OPAL takeover assembly code, for use by prom_init.c - * - * Copyright 2011 IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#define H_HAL_TAKEOVER 0x5124 -#define H_HAL_TAKEOVER_QUERY_MAGIC -1 - - .text -_GLOBAL(opal_query_takeover) - mfcr r0 - stw r0,8(r1) - stdu r1,-STACKFRAMESIZE(r1) - std r3,STK_PARAM(R3)(r1) - std r4,STK_PARAM(R4)(r1) - li r3,H_HAL_TAKEOVER - li r4,H_HAL_TAKEOVER_QUERY_MAGIC - HVSC - addi r1,r1,STACKFRAMESIZE - ld r10,STK_PARAM(R3)(r1) - std r4,0(r10) - ld r10,STK_PARAM(R4)(r1) - std r5,0(r10) - lwz r0,8(r1) - mtcrf 0xff,r0 - blr - -_GLOBAL(opal_do_takeover) - mfcr r0 - stw r0,8(r1) - mflr r0 - std r0,16(r1) - bl __opal_do_takeover - ld r0,16(r1) - mtlr r0 - lwz r0,8(r1) - mtcrf 0xff,r0 - blr - -__opal_do_takeover: - ld r4,0(r3) - ld r5,0x8(r3) - ld r6,0x10(r3) - ld r7,0x18(r3) - ld r8,0x20(r3) - ld r9,0x28(r3) - ld r10,0x30(r3) - ld r11,0x38(r3) - li r3,H_HAL_TAKEOVER - HVSC - blr - - .globl opal_secondary_entry -opal_secondary_entry: - mr r31,r3 - mfmsr r11 - li r12,(MSR_SF | MSR_ISF)@highest - sldi r12,r12,48 - or r11,r11,r12 - mtmsrd r11 - isync - mfspr r4,SPRN_PIR - std r4,0(r3) -1: HMT_LOW - ld r4,8(r3) - cmpli cr0,r4,0 - beq 1b - HMT_MEDIUM -1: addi r3,r31,16 - bl __opal_do_takeover - b 1b - -_GLOBAL(opal_enter_rtas) - mflr r0 - std r0,16(r1) - stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ - - /* Because PROM is running in 32b mode, it clobbers the high order half - * of all registers that it saves. We therefore save those registers - * PROM might touch to the stack. (r0, r3-r13 are caller saved) - */ - SAVE_GPR(2, r1) - SAVE_GPR(13, r1) - SAVE_8GPRS(14, r1) - SAVE_10GPRS(22, r1) - mfcr r10 - mfmsr r11 - std r10,_CCR(r1) - std r11,_MSR(r1) - - /* Get the PROM entrypoint */ - mtlr r5 - - /* Switch MSR to 32 bits mode - */ - li r12,1 - rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) - andc r11,r11,r12 - li r12,1 - rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) - andc r11,r11,r12 - mtmsrd r11 - isync - - /* Enter RTAS here... */ - blrl - - /* Just make sure that r1 top 32 bits didn't get - * corrupt by OF - */ - rldicl r1,r1,0,32 - - /* Restore the MSR (back to 64 bits) */ - ld r0,_MSR(r1) - MTMSRD(r0) - isync - - /* Restore other registers */ - REST_GPR(2, r1) - REST_GPR(13, r1) - REST_8GPRS(14, r1) - REST_10GPRS(22, r1) - ld r4,_CCR(r1) - mtcr r4 - - addi r1,r1,PROM_FRAME_SIZE - ld r0,16(r1) - mtlr r0 - blr