mt76: mt76x0u: do not reset radio on resume

commit 8f2d163cb26da87e7d8e1677368b8ba1ba4d30b3 upstream.

On some machines mt76x0u firmware can hung during resume,
what result on messages like below:

[  475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71
[  477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.825029] usb 1-8: USB disconnect, device number 6

and possible whole system freeze.

This can be avoided, if we do not perform mt76x0_chip_onoff() reset.

Cc: stable@vger.kernel.org
Fixes: 134b2d0d ("mt76x0: init files")
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

drivers/net/wireless/mediatek/mt76/mt76x0/init.c

@@ -369,7 +369,7 @@ static void mt76x0_stop_hardware(struct mt76x0_dev *dev)
 	mt76x0_chip_onoff(dev, false, false);
 }
 
-int mt76x0_init_hardware(struct mt76x0_dev *dev)
+int mt76x0_init_hardware(struct mt76x0_dev *dev, bool reset)
 {
 	static const u16 beacon_offsets[16] = {
 		/* 512 byte per beacon */
@@ -382,7 +382,7 @@ int mt76x0_init_hardware(struct mt76x0_dev *dev)
 
 	dev->beacon_offsets = beacon_offsets;
 
-	mt76x0_chip_onoff(dev, true, true);
+	mt76x0_chip_onoff(dev, true, reset);
 
 	ret = mt76x0_wait_asic_ready(dev);
 	if (ret)

drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h

@@ -279,7 +279,7 @@ void mt76x0_addr_wr(struct mt76x0_dev *dev, const u32 offset, const u8 *addr);
 
 /* Init */
 struct mt76x0_dev *mt76x0_alloc_device(struct device *dev);
-int mt76x0_init_hardware(struct mt76x0_dev *dev);
+int mt76x0_init_hardware(struct mt76x0_dev *dev, bool reset);
 int mt76x0_register_device(struct mt76x0_dev *dev);
 void mt76x0_cleanup(struct mt76x0_dev *dev);
 void mt76x0_chip_onoff(struct mt76x0_dev *dev, bool enable, bool reset);

drivers/net/wireless/mediatek/mt76/mt76x0/usb.c

@@ -300,7 +300,7 @@ static int mt76x0_probe(struct usb_interface *usb_intf,
 	if (!(mt76_rr(dev, MT_EFUSE_CTRL) & MT_EFUSE_CTRL_SEL))
 		dev_warn(dev->mt76.dev, "Warning: eFUSE not present\n");
 
-	ret = mt76x0_init_hardware(dev);
+	ret = mt76x0_init_hardware(dev, true);
 	if (ret)
 		goto err;
 
@@ -354,7 +354,7 @@ static int mt76x0_resume(struct usb_interface *usb_intf)
 	struct mt76x0_dev *dev = usb_get_intfdata(usb_intf);
 	int ret;
 
-	ret = mt76x0_init_hardware(dev);
+	ret = mt76x0_init_hardware(dev, false);
 	if (ret)
 		return ret;