Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)
  hwmon: Remove the deprecated adt7473 driver
  hwmon: Fix off-by-one kind values
  hwmon: (tmp421) Fix temperature conversions
  hwmon: (tmp421) Restore missing inputs
  hwmon: Driver for Andigilog aSC7621 family monitoring chips
  hwmon: (adt7411) Improve locking
  hwmon: Add driver for ADT7411 voltage and temperature sensor
  hwmon: (w83793) Add watchdog functionality
  hwmon: (g760a) Make rpm_from_cnt static
  hwmon: (it87) Validate auto pwm settings
  hwmon: (it87) Add support for old automatic fan speed control
  hwmon: (it87) Drop dead web links in documentation
  hwmon: (it87) Add an entry in MAINTAINERS
  hwmon: (it87) Use strict_strtol instead of simple_strtol
  hwmon: (it87) Fix many checkpatch errors and warnings
  hwmon: (it87) Add support for beep on alarm
  hwmon: (it87) Create vid attributes by group
  hwmon: (it87) Refactor attributes creation and removal
  hwmon: (it87) Expose the PWM/temperature mappings
  hwmon: (it87) Display fan outputs in automatic mode as such
  ...

Documentation/feature-removal-schedule.txt

@@ -449,12 +449,6 @@ Who:	Alok N Kataria <akataria@vmware.com>
 
 ----------------------------
 
-What:	adt7473 hardware monitoring driver
-When:	February 2010
-Why:	Obsoleted by the adt7475 driver.
-Who:	Jean Delvare <khali@linux-fr.org>
-
----------------------------
 What:	Support for lcd_switch and display_get in asus-laptop driver
 When:	March 2010
 Why:	These two features use non-standard interfaces. There are the

Documentation/hwmon/adt7411

+Kernel driver adt7411
+=====================
+
+Supported chips:
+  * Analog Devices ADT7411
+    Prefix: 'adt7411'
+    Addresses scanned: 0x48, 0x4a, 0x4b
+    Datasheet: Publicly available at the Analog Devices website
+
+Author: Wolfram Sang (based on adt7470 by Darrick J. Wong)
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7411 chip. There may
+be other chips that implement this interface.
+
+The ADT7411 can use an I2C/SMBus compatible 2-wire interface or an
+SPI-compatible 4-wire interface. It provides a 10-bit analog to digital
+converter which measures 1 temperature, vdd and 8 input voltages. It has an
+internal temperature sensor, but an external one can also be connected (one
+loses 2 inputs then). There are high- and low-limit registers for all inputs.
+
+Check the datasheet for details.
+
+sysfs-Interface
+---------------
+
+in0_input	- vdd voltage input
+in[1-8]_input	- analog 1-8 input
+temp1_input	- temperature input
+
+Besides standard interfaces, this driver adds (0 = off, 1 = on):
+
+  adc_ref_vdd	- Use vdd as reference instead of 2.25 V
+  fast_sampling	- Sample at 22.5 kHz instead of 1.4 kHz, but drop filters
+  no_average	- Turn off averaging over 16 samples
+
+Notes
+-----
+
+SPI, external temperature sensor and limit registers are not supported yet.

Documentation/hwmon/adt7473

-Kernel driver adt7473
-======================
-
-Supported chips:
-  * Analog Devices ADT7473
-    Prefix: 'adt7473'
-    Addresses scanned: I2C 0x2C, 0x2D, 0x2E
-    Datasheet: Publicly available at the Analog Devices website
-
-Author: Darrick J. Wong
-
-This driver is depreacted, please use the adt7475 driver instead.
-
-Description
------------
-
-This driver implements support for the Analog Devices ADT7473 chip family.
-
-The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0
-specification. Using an analog to digital converter it measures three (3)
-temperatures and two (2) voltages. It has four (4) 16-bit counters for
-measuring fan speed. There are three (3) PWM outputs that can be used
-to control fan speed.
-
-A sophisticated control system for the PWM outputs is designed into the
-ADT7473 that allows fan speed to be adjusted automatically based on any of the
-three temperature sensors. Each PWM output is individually adjustable and
-programmable. Once configured, the ADT7473 will adjust the PWM outputs in
-response to the measured temperatures without further host intervention.
-This feature can also be disabled for manual control of the PWM's.
-
-Each of the measured inputs (voltage, temperature, fan speed) has
-corresponding high/low limit values. The ADT7473 will signal an ALARM if
-any measured value exceeds either limit.
-
-The ADT7473 samples all inputs continuously. The driver will not read
-the registers more often than once every other second. Further,
-configuration data is only read once per minute.
-
-Special Features
-----------------
-
-The ADT7473 have a 10-bit ADC and can therefore measure temperatures
-with 0.25 degC resolution. Temperature readings can be configured either
-for twos complement format or "Offset 64" format, wherein 63 is subtracted
-from the raw value to get the temperature value.
-
-The Analog Devices datasheet is very detailed and describes a procedure for
-determining an optimal configuration for the automatic PWM control.
-
-Configuration Notes
--------------------
-
-Besides standard interfaces driver adds the following:
-
-* PWM Control
-
-* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
-* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
-
-point1: Set the pwm speed at a lower temperature bound.
-point2: Set the pwm speed at a higher temperature bound.
-
-The ADT7473 will scale the pwm between the lower and higher pwm speed when
-the temperature is between the two temperature boundaries.  PWM values range
-from 0 (off) to 255 (full speed).  Fan speed will be set to maximum when the
-temperature sensor associated with the PWM control exceeds temp#_max.
-
-Notes
------
-
-The NVIDIA binary driver presents an ADT7473 chip via an on-card i2c bus.
-Unfortunately, they fail to set the i2c adapter class, so this driver may
-fail to find the chip until the nvidia driver is patched.

Documentation/hwmon/asc7621

+Kernel driver asc7621
+==================
+
+Supported chips:
+    Andigilog aSC7621 and aSC7621a
+    Prefix: 'asc7621'
+    Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+    Datasheet: http://www.fairview5.com/linux/asc7621/asc7621.pdf
+
+Author:
+		George Joseph
+
+Description provided by Dave Pivin @ Andigilog:
+
+Andigilog has both the PECI and pre-PECI versions of the Heceta-6, as
+Intel calls them. Heceta-6e has high frequency PWM and Heceta-6p has
+added PECI and a 4th thermal zone. The Andigilog aSC7611 is the
+Heceta-6e part and aSC7621 is the Heceta-6p part. They are both in
+volume production, shipping to Intel and their subs.
+
+We have enhanced both parts relative to the governing Intel
+specification. First enhancement is temperature reading resolution. We
+have used registers below 20h for vendor-specific functions in addition
+to those in the Intel-specified vendor range.
+
+Our conversion process produces a result that is reported as two bytes.
+The fan speed control uses this finer value to produce a "step-less" fan
+PWM output. These two bytes are "read-locked" to guarantee that once a
+high or low byte is read, the other byte is locked-in until after the
+next read of any register. So to get an atomic reading, read high or low
+byte, then the very next read should be the opposite byte. Our data
+sheet says 10-bits of resolution, although you may find the lower bits
+are active, they are not necessarily reliable or useful externally. We
+chose not to mask them.
+
+We employ significant filtering that is user tunable as described in the
+data sheet. Our temperature reports and fan PWM outputs are very smooth
+when compared to the competition, in addition to the higher resolution
+temperature reports. The smoother PWM output does not require user
+intervention.
+
+We offer GPIO features on the former VID pins. These are open-drain
+outputs or inputs and may be used as general purpose I/O or as alarm
+outputs that are based on temperature limits. These are in 19h and 1Ah.
+
+We offer flexible mapping of temperature readings to thermal zones. Any
+temperature may be mapped to any zone, which has a default assignment
+that follows Intel's specs.
+
+Since there is a fan to zone assignment that allows for the "hotter" of
+a set of zones to control the PWM of an individual fan, but there is no
+indication to the user, we have added an indicator that shows which zone
+is currently controlling the PWM for a given fan. This is in register
+00h.
+
+Both remote diode temperature readings may be given an offset value such
+that the reported reading as well as the temperature used to determine
+PWM may be offset for system calibration purposes.
+
+PECI Extended configuration allows for having more than two domains per
+PECI address and also provides an enabling function for each PECI
+address. One could use our flexible zone assignment to have a zone
+assigned to up to 4 PECI addresses. This is not possible in the default
+Intel configuration. This would be useful in multi-CPU systems with
+individual fans on each that would benefit from individual fan control.
+This is in register 0Eh.
+
+The tachometer measurement system is flexible and able to adapt to many
+fan types. We can also support pulse-stretched PWM so that 3-wire fans
+may be used. These characteristics are in registers 04h to 07h.
+
+Finally, we have added a tach disable function that turns off the tach
+measurement system for individual tachs in order to save power. That is
+in register 75h.
+
+--
+aSC7621 Product Description
+
+The aSC7621 has a two wire digital interface compatible with SMBus 2.0.
+Using a 10-bit ADC, the aSC7621 measures the temperature of two remote diode
+connected transistors as well as its own die. Support for Platform
+Environmental Control Interface (PECI) is included.
+
+Using temperature information from these four zones, an automatic fan speed
+control algorithm is employed to minimize acoustic impact while achieving
+recommended CPU temperature under varying operational loads.
+
+To set fan speed, the aSC7621 has three independent pulse width modulation
+(PWM) outputs that are controlled by one, or a combination of three,
+temperature zones. Both high- and low-frequency PWM ranges are supported.
+
+The aSC7621 also includes a digital filter that can be invoked to smooth
+temperature readings for better control of fan speed and minimum acoustic
+impact.
+
+The aSC7621 has tachometer inputs to measure fan speed on up to four fans.
+Limit and status registers for all measured values are included to alert
+the system host that any measurements are outside of programmed limits
+via status registers.
+
+System voltages of VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard power are
+monitored efficiently with internal scaling resistors.
+
+Features
+- Supports PECI interface and monitors internal and remote thermal diodes
+- 2-wire, SMBus 2.0 compliant, serial interface
+- 10-bit ADC
+- Monitors VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard/processor supplies
+- Programmable autonomous fan control based on temperature readings
+- Noise filtering of temperature reading for fan speed control
+- 0.25C digital temperature sensor resolution
+- 3 PWM fan speed control outputs for 2-, 3- or 4-wire fans and up to 4 fan
+	tachometer inputs
+- Enhanced measured temperature to Temperature Zone assignment.
+- Provides high and low PWM frequency ranges
+- 3 GPIO pins for custom use
+- 24-Lead QSOP package
+
+Configuration Notes
+===================
+
+Except where noted below, the sysfs entries created by this driver follow
+the standards defined in "sysfs-interface".
+
+temp1_source
+	0 	(default) peci_legacy = 0, Remote 1 Temperature
+			peci_legacy = 1, PECI Processor Temperature 0
+	1 	Remote 1 Temperature
+	2 	Remote 2 Temperature
+	3 	Internal Temperature
+	4 	PECI Processor Temperature 0
+	5 	PECI Processor Temperature 1
+	6 	PECI Processor Temperature 2
+	7  PECI Processor Temperature 3
+
+temp2_source
+	0 	(default) Internal Temperature
+	1 	Remote 1 Temperature
+	2 	Remote 2 Temperature
+	3 	Internal Temperature
+	4 	PECI Processor Temperature 0
+	5 	PECI Processor Temperature 1
+	6 	PECI Processor Temperature 2
+	7 	PECI Processor Temperature 3
+
+temp3_source
+	0 	(default) Remote 2 Temperature
+	1 	Remote 1 Temperature
+	2 	Remote 2 Temperature
+	3 	Internal Temperature
+	4 	PECI Processor Temperature 0
+	5 	PECI Processor Temperature 1
+	6 	PECI Processor Temperature 2
+	7 	PECI Processor Temperature 3
+
+temp4_source
+	0 	(default) peci_legacy = 0, PECI Processor Temperature 0
+			peci_legacy = 1, Remote 1 Temperature
+	1 	Remote 1 Temperature
+	2 	Remote 2 Temperature
+	3 	Internal Temperature
+	4 	PECI Processor Temperature 0
+	5 	PECI Processor Temperature 1
+	6 	PECI Processor Temperature 2
+	7 	PECI Processor Temperature 3
+
+temp[1-4]_smoothing_enable
+temp[1-4]_smoothing_time
+	Smooths spikes in temp readings caused by noise.
+	Valid values in milliseconds are:
+	35000
+	17600
+	11800
+	 7000
+	 4400
+	 3000
+	 1600
+	  800
+
+temp[1-4]_crit
+	When the corresponding zone temperature reaches this value,
+	ALL pwm outputs will got to 100%.
+
+temp[5-8]_input
+temp[5-8]_enable
+	The aSC7621 can also read temperatures provided by the processor
+	via the PECI bus.  Usually these are "core" temps and are relative
+	to the point where the automatic thermal control circuit starts
+	throttling.  This means that these are usually negative numbers.
+
+pwm[1-3]_enable
+	0		Fan off.
+	1		Fan on manual control.
+	2		Fan on automatic control and will run at the minimum pwm
+				if the temperature for the zone is below the minimum.
+	3		Fan on automatic control but will be off if the temperature
+				for the zone is below the minimum.
+	4-254	Ignored.
+	255		Fan on full.
+
+pwm[1-3]_auto_channels
+	Bitmap as described in sysctl-interface with the following
+	exceptions...
+	Only the following combination of zones (and their corresponding masks)
+	are valid:
+	1
+	2
+	3
+	2,3
+	1,2,3
+	4
+	1,2,3,4
+
+	Special values:
+	0			Disabled.
+	16		Fan on manual control.
+	31		Fan on full.
+
+
+pwm[1-3]_invert
+	When set, inverts the meaning of pwm[1-3].
+	i.e.  when pwm = 0, the fan will be on full and
+	when pwm = 255 the fan will be off.
+
+pwm[1-3]_freq
+	PWM frequency in Hz
+	Valid values in Hz are:
+
+	10
+	15
+	23
+	30  (default)
+	38
+	47
+	62
+	94
+	23000
+	24000
+	25000
+	26000
+	27000
+	28000
+	29000
+	30000
+
+	Setting any other value will be ignored.
+
+peci_enable
+	Enables or disables PECI
+
+peci_avg
+	Input filter average time.
+
+	0 	0 Sec. (no Smoothing) (default)
+	1 	0.25 Sec.
+	2 	0.5 Sec.
+	3 	1.0 Sec.
+	4 	2.0 Sec.
+	5 	4.0 Sec.
+	6 	8.0 Sec.
+	7 	0.0 Sec.
+
+peci_legacy
+
+	0	Standard Mode (default)
+		Remote Diode 1 reading is associated with
+		Temperature Zone 1, PECI is associated with
+		Zone 4
+
+	1	Legacy Mode
+		PECI is associated with Temperature Zone 1,
+		Remote Diode 1 is associated with Zone 4
+
+peci_diode
+	Diode filter
+
+	0	0.25 Sec.
+	1 	1.1 Sec.
+	2 	2.4 Sec.  (default)
+	3 	3.4 Sec.
+	4 	5.0 Sec.
+	5 	6.8 Sec.
+	6 	10.2 Sec.
+	7 	16.4 Sec.
+
+peci_4domain
+	Four domain enable
+
+	0 	1 or 2 Domains for enabled processors (default)
+	1 	3 or 4 Domains for enabled processors
+
+peci_domain
+	Domain
+
+	0 	Processor contains a single domain (0) 	 (default)
+	1 	Processor contains two domains (0,1)

Documentation/hwmon/it87

@@ -5,31 +5,23 @@ Supported chips:
   * IT8705F
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
-    Datasheet: Publicly available at the ITE website
-               http://www.ite.com.tw/product_info/file/pc/IT8705F_V.0.4.1.pdf
+    Datasheet: Once publicly available at the ITE website, but no longer
   * IT8712F
     Prefix: 'it8712'
     Addresses scanned: from Super I/O config space (8 I/O ports)
-    Datasheet: Publicly available at the ITE website
-               http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf
-               http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf
-               http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf
+    Datasheet: Once publicly available at the ITE website, but no longer
   * IT8716F/IT8726F
     Prefix: 'it8716'
     Addresses scanned: from Super I/O config space (8 I/O ports)
-    Datasheet: Publicly available at the ITE website
-               http://www.ite.com.tw/product_info/file/pc/IT8716F_V0.3.ZIP
-               http://www.ite.com.tw/product_info/file/pc/IT8726F_V0.3.pdf
+    Datasheet: Once publicly available at the ITE website, but no longer
   * IT8718F
     Prefix: 'it8718'
     Addresses scanned: from Super I/O config space (8 I/O ports)
-    Datasheet: Publicly available at the ITE website
-               http://www.ite.com.tw/product_info/file/pc/IT8718F_V0.2.zip
-               http://www.ite.com.tw/product_info/file/pc/IT8718F_V0%203_(for%20C%20version).zip
+    Datasheet: Once publicly available at the ITE website, but no longer
   * IT8720F
     Prefix: 'it8720'
     Addresses scanned: from Super I/O config space (8 I/O ports)
-    Datasheet: Not yet publicly available.
+    Datasheet: Not publicly available
   * SiS950   [clone of IT8705F]
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -136,6 +128,10 @@ registers are read whenever any data is read (unless it is less than 1.5
 seconds since the last update). This means that you can easily miss
 once-only alarms.
 
+Out-of-limit readings can also result in beeping, if the chip is properly
+wired and configured. Beeping can be enabled or disabled per sensor type
+(temperatures, voltages and fans.)
+
 The IT87xx only updates its values each 1.5 seconds; reading it more often
 will do no harm, but will return 'old' values.
 
@@ -150,11 +146,38 @@ Fan speed control
 -----------------
 
 The fan speed control features are limited to manual PWM mode. Automatic
-"Smart Guardian" mode control handling is not implemented. However
-if you want to go for "manual mode" just write 1 to pwmN_enable.
+"Smart Guardian" mode control handling is only implemented for older chips
+(see below.) However if you want to go for "manual mode" just write 1 to
+pwmN_enable.
 
 If you are only able to control the fan speed with very small PWM values,
 try lowering the PWM base frequency (pwm1_freq). Depending on the fan,
 it may give you a somewhat greater control range. The same frequency is
 used to drive all fan outputs, which is why pwm2_freq and pwm3_freq are
 read-only.
+
+
+Automatic fan speed control (old interface)
+-------------------------------------------
+
+The driver supports the old interface to automatic fan speed control
+which is implemented by IT8705F chips up to revision F and IT8712F
+chips up to revision G.
+
+This interface implements 4 temperature vs. PWM output trip points.
+The PWM output of trip point 4 is always the maximum value (fan running
+at full speed) while the PWM output of the other 3 trip points can be
+freely chosen. The temperature of all 4 trip points can be freely chosen.
+Additionally, trip point 1 has an hysteresis temperature attached, to
+prevent fast switching between fan on and off.
+
+The chip automatically computes the PWM output value based on the input
+temperature, based on this simple rule: if the temperature value is
+between trip point N and trip point N+1 then the PWM output value is
+the one of trip point N. The automatic control mode is less flexible
+than the manual control mode, but it reacts faster, is more robust and
+doesn't use CPU cycles.
+
+Trip points must be set properly before switching to automatic fan speed
+control mode. The driver will perform basic integrity checks before
+actually switching to automatic control mode.

Documentation/hwmon/lm90

@@ -84,6 +84,10 @@ Supported chips:
     Addresses scanned: I2C 0x4c
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+  * Winbond/Nuvoton W83L771AWG/ASG
+    Prefix: 'w83l771'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Not publicly available, can be requested from Nuvoton
 
 
 Author: Jean Delvare <khali@linux-fr.org>
@@ -147,6 +151,12 @@ MAX6680 and MAX6681:
   * Selectable address
   * Remote sensor type selection
 
+W83L771AWG/ASG
+  * The AWG and ASG variants only differ in package format.
+  * Filter and alert configuration register at 0xBF
+  * Diode ideality factor configuration (remote sensor) at 0xE3
+  * Moving average (depending on conversion rate)
+
 All temperature values are given in degrees Celsius. Resolution
 is 1.0 degree for the local temperature, 0.125 degree for the remote
 temperature, except for the MAX6657, MAX6658 and MAX6659 which have a
@@ -163,6 +173,18 @@ The lm90 driver will not update its values more frequently than every
 other second; reading them more often will do no harm, but will return
 'old' values.
 
+SMBus Alert Support
+-------------------
+
+This driver has basic support for SMBus alert. When an alert is received,
+the status register is read and the faulty temperature channel is logged.
+
+The Analog Devices chips (ADM1032 and ADT7461) do not implement the SMBus
+alert protocol properly so additional care is needed: the ALERT output is
+disabled when an alert is received, and is re-enabled only when the alarm
+is gone. Otherwise the chip would block alerts from other chips in the bus
+as long as the alarm is active.
+
 PEC Support
 -----------
 

MAINTAINERS

@@ -968,6 +968,13 @@ W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	arch/arm/vfp/
 
+ASC7621 HARDWARE MONITOR DRIVER
+M:	George Joseph <george.joseph@fairview5.com>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/asc7621
+F:	drivers/hwmon/asc7621.c
+
 ASUS ACPI EXTRAS DRIVER
 M:	Corentin Chary <corentincj@iksaif.net>
 M:	Karol Kozimor <sziwan@users.sourceforge.net>
@@ -3048,6 +3055,13 @@ W:	http://www.melware.de
 S:	Maintained
 F:	drivers/isdn/hardware/eicon/
 
+IT87 HARDWARE MONITORING DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/it87
+F:	drivers/hwmon/it87.c
+
 IVTV VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@radix.net>
 L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)

drivers/hwmon/Kconfig

@@ -170,6 +170,16 @@ config SENSORS_ADM9240
 	  This driver can also be built as a module.  If so, the module
 	  will be called adm9240.
 
+config SENSORS_ADT7411
+	tristate "Analog Devices ADT7411"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Analog Devices
+	  ADT7411 voltage and temperature monitoring chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called adt7411.
+
 config SENSORS_ADT7462
 	tristate "Analog Devices ADT7462"
 	depends on I2C && EXPERIMENTAL
@@ -190,20 +200,6 @@ config SENSORS_ADT7470
 	  This driver can also be built as a module. If so, the module
 	  will be called adt7470.
 
-config SENSORS_ADT7473
-	tristate "Analog Devices ADT7473 (DEPRECATED)"
-	depends on I2C && EXPERIMENTAL
-	select SENSORS_ADT7475
-	help
-	  If you say yes here you get support for the Analog Devices
-	  ADT7473 temperature monitoring chips.
-
-	  This driver is deprecated, you should use the adt7475 driver
-	  instead.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called adt7473.
-
 config SENSORS_ADT7475
 	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 	depends on I2C && EXPERIMENTAL
@@ -216,6 +212,19 @@ config SENSORS_ADT7475
 	  This driver can also be build as a module.  If so, the module
 	  will be called adt7475.
 
+config SENSORS_ASC7621
+	tristate "Andigilog aSC7621"
+	depends on HWMON && I2C
+	help
+	  If you say yes here you get support for the aSC7621
+	  family of SMBus sensors chip found on most Intel X48, X38, 975,
+	  965 and 945 desktop boards.  Currently supported chips:
+	  aSC7621
+	  aSC7621a
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called asc7621.
+
 config SENSORS_K8TEMP
 	tristate "AMD Athlon64/FX or Opteron temperature sensor"
 	depends on X86 && PCI && EXPERIMENTAL
@@ -563,9 +572,10 @@ config SENSORS_LM90
 	depends on I2C
 	help
 	  If you say yes here you get support for National Semiconductor LM90,
-	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
 	  MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
-	  MAX6680, MAX6681 and MAX6692 sensor chips.
+	  MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG
+	  sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
@@ -909,7 +919,8 @@ config SENSORS_W83793
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the Winbond W83793
-	  hardware monitoring chip.
+	  hardware monitoring chip, including support for the integrated
+	  watchdog.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83793.

drivers/hwmon/Makefile

@@ -29,12 +29,13 @@ obj-$(CONFIG_SENSORS_ADM1029)	+= adm1029.o
 obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
 obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
 obj-$(CONFIG_SENSORS_ADS7828)	+= ads7828.o
+obj-$(CONFIG_SENSORS_ADT7411)	+= adt7411.o
 obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
-obj-$(CONFIG_SENSORS_ADT7473)	+= adt7473.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
+obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o

drivers/hwmon/adt7411.c

+/*
+ *  Driver for the ADT7411 (I2C/SPI 8 channel 10 bit ADC & temperature-sensor)
+ *
+ *  Copyright (C) 2008, 2010 Pengutronix
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  TODO: SPI, support for external temperature sensor
+ * 	  use power-down mode for suspend?, interrupt handling?
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#define ADT7411_REG_INT_TEMP_VDD_LSB		0x03
+#define ADT7411_REG_EXT_TEMP_AIN14_LSB		0x04
+#define ADT7411_REG_VDD_MSB			0x06
+#define ADT7411_REG_INT_TEMP_MSB		0x07
+#define ADT7411_REG_EXT_TEMP_AIN1_MSB		0x08
+
+#define ADT7411_REG_CFG1			0x18
+#define ADT7411_CFG1_START_MONITOR		(1 << 0)
+
+#define ADT7411_REG_CFG2			0x19
+#define ADT7411_CFG2_DISABLE_AVG		(1 << 5)
+
+#define ADT7411_REG_CFG3			0x1a
+#define ADT7411_CFG3_ADC_CLK_225		(1 << 0)
+#define ADT7411_CFG3_REF_VDD			(1 << 4)
+
+#define ADT7411_REG_DEVICE_ID			0x4d
+#define ADT7411_REG_MANUFACTURER_ID		0x4e
+
+#define ADT7411_DEVICE_ID			0x2
+#define ADT7411_MANUFACTURER_ID			0x41
+
+static const unsigned short normal_i2c[] = { 0x48, 0x4a, 0x4b, I2C_CLIENT_END };
+
+struct adt7411_data {
+	struct mutex device_lock;	/* for "atomic" device accesses */
+	struct mutex update_lock;
+	unsigned long next_update;
+	int vref_cached;
+	struct device *hwmon_dev;
+};
+
+/*
+ * When reading a register containing (up to 4) lsb, all associated
+ * msb-registers get locked by the hardware. After _one_ of those msb is read,
+ * _all_ are unlocked. In order to use this locking correctly, reading lsb/msb
+ * is protected here with a mutex, too.
+ */
+static int adt7411_read_10_bit(struct i2c_client *client, u8 lsb_reg,
+				u8 msb_reg, u8 lsb_shift)
+{
+	struct adt7411_data *data = i2c_get_clientdata(client);
+	int val, tmp;
+
+	mutex_lock(&data->device_lock);
+
+	val = i2c_smbus_read_byte_data(client, lsb_reg);
+	if (val < 0)
+		goto exit_unlock;
+
+	tmp = (val >> lsb_shift) & 3;
+	val = i2c_smbus_read_byte_data(client, msb_reg);
+
+	if (val >= 0)
+		val = (val << 2) | tmp;
+
+ exit_unlock:
+	mutex_unlock(&data->device_lock);
+
+	return val;
+}
+
+static int adt7411_modify_bit(struct i2c_client *client, u8 reg, u8 bit,
+				bool flag)
+{
+	struct adt7411_data *data = i2c_get_clientdata(client);
+	int ret, val;
+
+	mutex_lock(&data->device_lock);
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		goto exit_unlock;
+
+	if (flag)
+		val = ret | bit;
+	else
+		val = ret & ~bit;
+
+	ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ exit_unlock:
+	mutex_unlock(&data->device_lock);
+	return ret;
+}
+
+static ssize_t adt7411_show_vdd(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = adt7411_read_10_bit(client, ADT7411_REG_INT_TEMP_VDD_LSB,
+			ADT7411_REG_VDD_MSB, 2);
+
+	return ret < 0 ? ret : sprintf(buf, "%u\n", ret * 7000 / 1024);
+}
+
+static ssize_t adt7411_show_temp(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val = adt7411_read_10_bit(client, ADT7411_REG_INT_TEMP_VDD_LSB,
+			ADT7411_REG_INT_TEMP_MSB, 0);
+
+	if (val < 0)
+		return val;
+
+	val = val & 0x200 ? val - 0x400 : val; /* 10 bit signed */
+
+	return sprintf(buf, "%d\n", val * 250);
+}
+
+static ssize_t adt7411_show_input(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7411_data *data = i2c_get_clientdata(client);
+	int val;
+	u8 lsb_reg, lsb_shift;
+
+	mutex_lock(&data->update_lock);
+	if (time_after_eq(jiffies, data->next_update)) {
+		val = i2c_smbus_read_byte_data(client, ADT7411_REG_CFG3);
+		if (val < 0)
+			goto exit_unlock;
+
+		if (val & ADT7411_CFG3_REF_VDD) {
+			val = adt7411_read_10_bit(client,
+					ADT7411_REG_INT_TEMP_VDD_LSB,
+					ADT7411_REG_VDD_MSB, 2);
+			if (val < 0)
+				goto exit_unlock;
+
+			data->vref_cached = val * 7000 / 1024;
+		} else {
+			data->vref_cached = 2250;
+		}
+
+		data->next_update = jiffies + HZ;
+	}
+
+	lsb_reg = ADT7411_REG_EXT_TEMP_AIN14_LSB + (nr >> 2);
+	lsb_shift = 2 * (nr & 0x03);
+	val = adt7411_read_10_bit(client, lsb_reg,
+			ADT7411_REG_EXT_TEMP_AIN1_MSB + nr, lsb_shift);
+	if (val < 0)
+		goto exit_unlock;
+
+	val = sprintf(buf, "%u\n", val * data->vref_cached / 1024);
+ exit_unlock:
+	mutex_unlock(&data->update_lock);
+	return val;
+}
+
+static ssize_t adt7411_show_bit(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = i2c_smbus_read_byte_data(client, attr2->index);
+
+	return ret < 0 ? ret : sprintf(buf, "%u\n", !!(ret & attr2->nr));
+}
+
+static ssize_t adt7411_set_bit(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct sensor_device_attribute_2 *s_attr2 = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7411_data *data = i2c_get_clientdata(client);
+	int ret;
+	unsigned long flag;
+
+	ret = strict_strtoul(buf, 0, &flag);
+	if (ret || flag > 1)
+		return -EINVAL;
+
+	ret = adt7411_modify_bit(client, s_attr2->index, s_attr2->nr, flag);
+
+	/* force update */
+	mutex_lock(&data->update_lock);
+	data->next_update = jiffies;
+	mutex_unlock(&data->update_lock);
+
+	return ret < 0 ? ret : count;
+}
+
+#define ADT7411_BIT_ATTR(__name, __reg, __bit) \
+	SENSOR_DEVICE_ATTR_2(__name, S_IRUGO | S_IWUSR, adt7411_show_bit, \
+	adt7411_set_bit, __bit, __reg)
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, adt7411_show_temp, NULL);
+static DEVICE_ATTR(in0_input, S_IRUGO, adt7411_show_vdd, NULL);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, adt7411_show_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, adt7411_show_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, adt7411_show_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, adt7411_show_input, NULL, 3);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, adt7411_show_input, NULL, 4);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, adt7411_show_input, NULL, 5);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, adt7411_show_input, NULL, 6);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, adt7411_show_input, NULL, 7);
+static ADT7411_BIT_ATTR(no_average, ADT7411_REG_CFG2, ADT7411_CFG2_DISABLE_AVG);
+static ADT7411_BIT_ATTR(fast_sampling, ADT7411_REG_CFG3, ADT7411_CFG3_ADC_CLK_225);
+static ADT7411_BIT_ATTR(adc_ref_vdd, ADT7411_REG_CFG3, ADT7411_CFG3_REF_VDD);
+
+static struct attribute *adt7411_attrs[] = {
+	&dev_attr_temp1_input.attr,
+	&dev_attr_in0_input.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in8_input.dev_attr.attr,
+	&sensor_dev_attr_no_average.dev_attr.attr,
+	&sensor_dev_attr_fast_sampling.dev_attr.attr,
+	&sensor_dev_attr_adc_ref_vdd.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group adt7411_attr_grp = {
+	.attrs = adt7411_attrs,
+};
+
+static int adt7411_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	int val;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	val = i2c_smbus_read_byte_data(client, ADT7411_REG_MANUFACTURER_ID);
+	if (val < 0 || val != ADT7411_MANUFACTURER_ID) {
+		dev_dbg(&client->dev, "Wrong manufacturer ID. Got %d, "
+			"expected %d\n", val, ADT7411_MANUFACTURER_ID);
+		return -ENODEV;
+	}
+
+	val = i2c_smbus_read_byte_data(client, ADT7411_REG_DEVICE_ID);
+	if (val < 0 || val != ADT7411_DEVICE_ID) {
+		dev_dbg(&client->dev, "Wrong device ID. Got %d, "
+			"expected %d\n", val, ADT7411_DEVICE_ID);
+		return -ENODEV;
+	}
+
+	strlcpy(info->type, "adt7411", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int __devinit adt7411_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct adt7411_data *data;
+	int ret;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->device_lock);
+	mutex_init(&data->update_lock);
+
+	ret = adt7411_modify_bit(client, ADT7411_REG_CFG1,
+				 ADT7411_CFG1_START_MONITOR, 1);
+	if (ret < 0)
+		goto exit_free;
+
+	/* force update on first occasion */
+	data->next_update = jiffies;
+
+	ret = sysfs_create_group(&client->dev.kobj, &adt7411_attr_grp);
+	if (ret)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	dev_info(&client->dev, "successfully registered\n");
+
+	return 0;
+
+ exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &adt7411_attr_grp);
+ exit_free:
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return ret;
+}
+
+static int __devexit adt7411_remove(struct i2c_client *client)
+{
+	struct adt7411_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &adt7411_attr_grp);
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return 0;
+}
+
+static const struct i2c_device_id adt7411_id[] = {
+	{ "adt7411", 0 },
+	{ }
+};
+
+static struct i2c_driver adt7411_driver = {
+	.driver		= {
+		.name		= "adt7411",
+	},
+	.probe  = adt7411_probe,
+	.remove	= __devexit_p(adt7411_remove),
+	.id_table = adt7411_id,
+	.detect = adt7411_detect,
+	.address_list = normal_i2c,
+	.class = I2C_CLASS_HWMON,
+};
+
+static int __init sensors_adt7411_init(void)
+{
+	return i2c_add_driver(&adt7411_driver);
+}
+module_init(sensors_adt7411_init)
+
+static void __exit sensors_adt7411_exit(void)
+{
+	i2c_del_driver(&adt7411_driver);
+}
+module_exit(sensors_adt7411_exit)
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de> and "
+	"Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_DESCRIPTION("ADT7411 driver");
+MODULE_LICENSE("GPL v2");

drivers/hwmon/fschmd.c

@@ -267,7 +267,7 @@ struct fschmd_data {
 	struct list_head list; /* member of the watchdog_data_list */
 	struct kref kref;
 	struct miscdevice watchdog_miscdev;
-	int kind;
+	enum chips kind;
 	unsigned long watchdog_is_open;
 	char watchdog_expect_close;
 	char watchdog_name[10]; /* must be unique to avoid sysfs conflict */
@@ -325,8 +325,7 @@ static ssize_t show_in_value(struct device *dev,
 	int index = to_sensor_dev_attr(devattr)->index;
 	struct fschmd_data *data = fschmd_update_device(dev);
 
-	/* fscher / fschrc - 1 as data->kind is an array index, not a chips */
-	if (data->kind == (fscher - 1) || data->kind >= (fschrc - 1))
+	if (data->kind == fscher || data->kind >= fschrc)
 		return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref *
 			dmi_mult[index]) / 255 + dmi_offset[index]);
 	else
@@ -492,7 +491,7 @@ static ssize_t show_pwm_auto_point1_pwm(struct device *dev,
 	int val = data->fan_min[index];
 
 	/* 0 = allow turning off (except on the syl), 1-255 = 50-100% */
-	if (val || data->kind == fscsyl - 1)
+	if (val || data->kind == fscsyl)
 		val = val / 2 + 128;
 
 	return sprintf(buf, "%d\n", val);
@@ -506,7 +505,7 @@ static ssize_t store_pwm_auto_point1_pwm(struct device *dev,
 	unsigned long v = simple_strtoul(buf, NULL, 10);
 
 	/* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */
-	if (v || data->kind == fscsyl - 1) {
+	if (v || data->kind == fscsyl) {
 		v = SENSORS_LIMIT(v, 128, 255);
 		v = (v - 128) * 2 + 1;
 	}
@@ -1037,7 +1036,7 @@ static int fschmd_detect(struct i2c_client *client,
 	else
 		return -ENODEV;
 
-	strlcpy(info->type, fschmd_id[kind - 1].name, I2C_NAME_SIZE);
+	strlcpy(info->type, fschmd_id[kind].name, I2C_NAME_SIZE);
 
 	return 0;
 }
@@ -1065,6 +1064,7 @@ static int fschmd_probe(struct i2c_client *client,
 	   (where the client is found through a data ptr instead of the
 	   otherway around) */
 	data->client = client;
+	data->kind = kind;
 
 	if (kind == fscpos) {
 		/* The Poseidon has hardwired temp limits, fill these
@@ -1085,9 +1085,6 @@ static int fschmd_probe(struct i2c_client *client,
 		}
 	}
 
-	/* i2c kind goes from 1-6, we want from 0-5 to address arrays */
-	data->kind = kind - 1;
-
 	/* Read in some never changing registers */
 	data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
 	data->global_control = i2c_smbus_read_byte_data(client,

drivers/hwmon/g760a.c

@@ -68,7 +68,7 @@ struct g760a_data {
 #define PWM_FROM_CNT(cnt)	(0xff-(cnt))
 #define PWM_TO_CNT(pwm)		(0xff-(pwm))
 
-unsigned int rpm_from_cnt(u8 val, u32 clk, u16 div)
+static inline unsigned int rpm_from_cnt(u8 val, u32 clk, u16 div)
 {
 	return ((val == 0x00) ? 0 : ((clk*30)/(val*div)));
 }

drivers/hwmon/lm90.c

 /*
  * lm90.c - Part of lm_sensors, Linux kernel modules for hardware
  *          monitoring
- * Copyright (C) 2003-2009  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2010  Jean Delvare <khali@linux-fr.org>
  *
  * Based on the lm83 driver. The LM90 is a sensor chip made by National
  * Semiconductor. It reports up to two temperatures (its own plus up to
@@ -93,7 +93,8 @@
 static const unsigned short normal_i2c[] = {
 	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 
-enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646 };
+enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646,
+	w83l771 };
 
 /*
  * The LM90 registers
@@ -151,6 +152,7 @@ static int lm90_detect(struct i2c_client *client, struct i2c_board_info *info);
 static int lm90_probe(struct i2c_client *client,
 		      const struct i2c_device_id *id);
 static void lm90_init_client(struct i2c_client *client);
+static void lm90_alert(struct i2c_client *client, unsigned int flag);
 static int lm90_remove(struct i2c_client *client);
 static struct lm90_data *lm90_update_device(struct device *dev);
 
@@ -173,6 +175,7 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "max6659", max6657 },
 	{ "max6680", max6680 },
 	{ "max6681", max6680 },
+	{ "w83l771", w83l771 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm90_id);
@@ -184,6 +187,7 @@ static struct i2c_driver lm90_driver = {
 	},
 	.probe		= lm90_probe,
 	.remove		= lm90_remove,
+	.alert		= lm90_alert,
 	.id_table	= lm90_id,
 	.detect		= lm90_detect,
 	.address_list	= normal_i2c,
@@ -201,6 +205,9 @@ struct lm90_data {
 	int kind;
 	int flags;
 
+	u8 config_orig;		/* Original configuration register value */
+	u8 alert_alarms;	/* Which alarm bits trigger ALERT# */
+
 	/* registers values */
 	s8 temp8[4];	/* 0: local low limit
 			   1: local high limit
@@ -758,6 +765,14 @@ static int lm90_detect(struct i2c_client *new_client,
 		 && reg_convrate <= 0x07) {
 			name = "max6646";
 		}
+	} else
+	if (address == 0x4C
+	 && man_id == 0x5C) { /* Winbond/Nuvoton */
+		if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
+		 && (reg_config1 & 0x2A) == 0x00
+		 && reg_convrate <= 0x08) {
+			name = "w83l771";
+		}
 	}
 
 	if (!name) { /* identification failed */
@@ -794,6 +809,19 @@ static int lm90_probe(struct i2c_client *new_client,
 			new_client->flags &= ~I2C_CLIENT_PEC;
 	}
 
+	/* Different devices have different alarm bits triggering the
+	 * ALERT# output */
+	switch (data->kind) {
+	case lm90:
+	case lm99:
+	case lm86:
+		data->alert_alarms = 0x7b;
+		break;
+	default:
+		data->alert_alarms = 0x7c;
+		break;
+	}
+
 	/* Initialize the LM90 chip */
 	lm90_init_client(new_client);
 
@@ -830,7 +858,7 @@ static int lm90_probe(struct i2c_client *new_client,
 
 static void lm90_init_client(struct i2c_client *client)
 {
-	u8 config, config_orig;
+	u8 config;
 	struct lm90_data *data = i2c_get_clientdata(client);
 
 	/*
@@ -842,7 +870,7 @@ static void lm90_init_client(struct i2c_client *client)
 		dev_warn(&client->dev, "Initialization failed!\n");
 		return;
 	}
-	config_orig = config;
+	data->config_orig = config;
 
 	/* Check Temperature Range Select */
 	if (data->kind == adt7461) {
@@ -860,7 +888,7 @@ static void lm90_init_client(struct i2c_client *client)
 	}
 
 	config &= 0xBF;	/* run */
-	if (config != config_orig) /* Only write if changed */
+	if (config != data->config_orig) /* Only write if changed */
 		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
 }
 
@@ -875,10 +903,46 @@ static int lm90_remove(struct i2c_client *client)
 		device_remove_file(&client->dev,
 				   &sensor_dev_attr_temp2_offset.dev_attr);
 
+	/* Restore initial configuration */
+	i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+				  data->config_orig);
+
 	kfree(data);
 	return 0;
 }
 
+static void lm90_alert(struct i2c_client *client, unsigned int flag)
+{
+	struct lm90_data *data = i2c_get_clientdata(client);
+	u8 config, alarms;
+
+	lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
+	if ((alarms & 0x7f) == 0) {
+		dev_info(&client->dev, "Everything OK\n");
+	} else {
+		if (alarms & 0x61)
+			dev_warn(&client->dev,
+				 "temp%d out of range, please check!\n", 1);
+		if (alarms & 0x1a)
+			dev_warn(&client->dev,
+				 "temp%d out of range, please check!\n", 2);
+		if (alarms & 0x04)
+			dev_warn(&client->dev,
+				 "temp%d diode open, please check!\n", 2);
+
+		/* Disable ALERT# output, because these chips don't implement
+		  SMBus alert correctly; they should only hold the alert line
+		  low briefly. */
+		if ((data->kind == adm1032 || data->kind == adt7461)
+		 && (alarms & data->alert_alarms)) {
+			dev_dbg(&client->dev, "Disabling ALERT#\n");
+			lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+			i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+						  config | 0x80);
+		}
+	}
+}
+
 static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
 {
 	int err;
@@ -966,6 +1030,21 @@ static struct lm90_data *lm90_update_device(struct device *dev)
 		}
 		lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms);
 
+		/* Re-enable ALERT# output if it was originally enabled and
+		 * relevant alarms are all clear */
+		if ((data->config_orig & 0x80) == 0
+		 && (data->alarms & data->alert_alarms) == 0) {
+			u8 config;
+
+			lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+			if (config & 0x80) {
+				dev_dbg(&client->dev, "Re-enabling ALERT#\n");
+				i2c_smbus_write_byte_data(client,
+							  LM90_REG_W_CONFIG1,
+							  config & ~0x80);
+			}
+		}
+
 		data->last_updated = jiffies;
 		data->valid = 1;
 	}