ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting support

Added 100M, 20G and 56G ethtool speed reporting support.
Update mlx4_en_test_speed self test with the new speeds.

Defined new link speeds in include/uapi/linux/ethtool.h:
+#define SPEED_20000	20000
+#define SPEED_40000	40000
+#define SPEED_56000	56000
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx4/en_port.c

@@ -91,15 +91,24 @@ int mlx4_en_QUERY_PORT(struct mlx4_en_dev *mdev, u8 port)
 	 * already synchronized, no need in locking */
 	state->link_state = !!(qport_context->link_up & MLX4_EN_LINK_UP_MASK);
 	switch (qport_context->link_speed & MLX4_EN_SPEED_MASK) {
+	case MLX4_EN_100M_SPEED:
+		state->link_speed = SPEED_100;
+		break;
 	case MLX4_EN_1G_SPEED:
-		state->link_speed = 1000;
+		state->link_speed = SPEED_1000;
 		break;
 	case MLX4_EN_10G_SPEED_XAUI:
 	case MLX4_EN_10G_SPEED_XFI:
-		state->link_speed = 10000;
+		state->link_speed = SPEED_10000;
+		break;
+	case MLX4_EN_20G_SPEED:
+		state->link_speed = SPEED_20000;
 		break;
 	case MLX4_EN_40G_SPEED:
-		state->link_speed = 40000;
+		state->link_speed = SPEED_40000;
+		break;
+	case MLX4_EN_56G_SPEED:
+		state->link_speed = SPEED_56000;
 		break;
 	default:
 		state->link_speed = -1;

drivers/net/ethernet/mellanox/mlx4/en_port.h

@@ -54,10 +54,13 @@ enum {
 };
 
 enum {
-	MLX4_EN_1G_SPEED	= 0x02,
-	MLX4_EN_10G_SPEED_XFI	= 0x01,
+	MLX4_EN_100M_SPEED	= 0x04,
 	MLX4_EN_10G_SPEED_XAUI	= 0x00,
+	MLX4_EN_10G_SPEED_XFI	= 0x01,
+	MLX4_EN_1G_SPEED	= 0x02,
+	MLX4_EN_20G_SPEED	= 0x08,
 	MLX4_EN_40G_SPEED	= 0x40,
+	MLX4_EN_56G_SPEED	= 0x20,
 	MLX4_EN_OTHER_SPEED	= 0x0f,
 };
 
@@ -68,7 +71,7 @@ struct mlx4_en_query_port_context {
 	__be16 mtu;
 	u8 reserved2;
 	u8 link_speed;
-#define MLX4_EN_SPEED_MASK	0x43
+#define MLX4_EN_SPEED_MASK	0x6f
 	u16 reserved3[5];
 	__be64 mac;
 	u8 transceiver;

drivers/net/ethernet/mellanox/mlx4/en_selftest.c

@@ -129,11 +129,15 @@ static int mlx4_en_test_speed(struct mlx4_en_priv *priv)
 	if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
 		return -ENOMEM;
 
-	/* The device supports 1G, 10G and 40G speeds */
-	if (priv->port_state.link_speed != 1000 &&
-	    priv->port_state.link_speed != 10000 &&
-	    priv->port_state.link_speed != 40000)
+	/* The device supports 100M, 1G, 10G, 20G, 40G and 56G speed */
+	if (priv->port_state.link_speed != SPEED_100 &&
+	    priv->port_state.link_speed != SPEED_1000 &&
+	    priv->port_state.link_speed != SPEED_10000 &&
+	    priv->port_state.link_speed != SPEED_20000 &&
+	    priv->port_state.link_speed != SPEED_40000 &&
+	    priv->port_state.link_speed != SPEED_56000)
 		return priv->port_state.link_speed;
+
 	return 0;
 }
 

include/uapi/linux/ethtool.h

@@ -1213,6 +1213,10 @@ enum ethtool_sfeatures_retval_bits {
 #define SUPPORTED_40000baseCR4_Full	(1 << 24)
 #define SUPPORTED_40000baseSR4_Full	(1 << 25)
 #define SUPPORTED_40000baseLR4_Full	(1 << 26)
+#define SUPPORTED_56000baseKR4_Full	(1 << 27)
+#define SUPPORTED_56000baseCR4_Full	(1 << 28)
+#define SUPPORTED_56000baseSR4_Full	(1 << 29)
+#define SUPPORTED_56000baseLR4_Full	(1 << 30)
 
 #define ADVERTISED_10baseT_Half		(1 << 0)
 #define ADVERTISED_10baseT_Full		(1 << 1)
@@ -1241,6 +1245,10 @@ enum ethtool_sfeatures_retval_bits {
 #define ADVERTISED_40000baseCR4_Full	(1 << 24)
 #define ADVERTISED_40000baseSR4_Full	(1 << 25)
 #define ADVERTISED_40000baseLR4_Full	(1 << 26)
+#define ADVERTISED_56000baseKR4_Full	(1 << 27)
+#define ADVERTISED_56000baseCR4_Full	(1 << 28)
+#define ADVERTISED_56000baseSR4_Full	(1 << 29)
+#define ADVERTISED_56000baseLR4_Full	(1 << 30)
 
 /* The following are all involved in forcing a particular link
  * mode for the device for setting things.  When getting the
@@ -1248,12 +1256,16 @@ enum ethtool_sfeatures_retval_bits {
  * it was forced up into this mode or autonegotiated.
  */
 
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+/* The forced speed, 10Mb, 100Mb, gigabit, [2.5|10|20|40|56]GbE. */
 #define SPEED_10		10
 #define SPEED_100		100
 #define SPEED_1000		1000
 #define SPEED_2500		2500
 #define SPEED_10000		10000
+#define SPEED_20000		20000
+#define SPEED_40000		40000
+#define SPEED_56000		56000
+
 #define SPEED_UNKNOWN		-1
 
 /* Duplex, half or full. */