diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index ac28dd5a4fd137f7cd522bbcf20fb3338ecffc38..bd3efdb95c6471765b65adfd90c967426a501b5e 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -867,8 +867,7 @@ void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw) u32 reg; if (hw->mac.type != e1000_82576 || - (hw->phy.media_type != e1000_media_type_fiber && - hw->phy.media_type != e1000_media_type_internal_serdes)) + hw->phy.media_type != e1000_media_type_internal_serdes) return; /* if the management interface is not enabled, then power down */ diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 68aac20c31cac92164acd0f787cc312672deab64..f096ddd842933d961fc156c3ea786361d355f56e 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -61,8 +61,7 @@ enum e1000_mac_type { enum e1000_media_type { e1000_media_type_unknown = 0, e1000_media_type_copper = 1, - e1000_media_type_fiber = 2, - e1000_media_type_internal_serdes = 3, + e1000_media_type_internal_serdes = 2, e1000_num_media_types }; diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 472f3f12484036479a13d37ed0e34be39c4582f6..37706d9981e8bf660f582b0dc13de540c00d7809 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -713,8 +713,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) * configuration of the MAC to match the "fc" parameter. */ if (mac->autoneg_failed) { - if (hw->phy.media_type == e1000_media_type_fiber || - hw->phy.media_type == e1000_media_type_internal_serdes) + if (hw->phy.media_type == e1000_media_type_internal_serdes) ret_val = igb_force_mac_fc(hw); } else { if (hw->phy.media_type == e1000_media_type_copper) @@ -1161,22 +1160,16 @@ s32 igb_blink_led(struct e1000_hw *hw) u32 ledctl_blink = 0; u32 i; - if (hw->phy.media_type == e1000_media_type_fiber) { - /* always blink LED0 for PCI-E fiber */ - ledctl_blink = E1000_LEDCTL_LED0_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); - } else { - /* - * set the blink bit for each LED that's "on" (0x0E) - * in ledctl_mode2 - */ - ledctl_blink = hw->mac.ledctl_mode2; - for (i = 0; i < 4; i++) - if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == - E1000_LEDCTL_MODE_LED_ON) - ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << - (i * 8)); - } + /* + * set the blink bit for each LED that's "on" (0x0E) + * in ledctl_mode2 + */ + ledctl_blink = hw->mac.ledctl_mode2; + for (i = 0; i < 4; i++) + if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == + E1000_LEDCTL_MODE_LED_ON) + ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << + (i * 8)); wr32(E1000_LEDCTL, ledctl_blink); @@ -1191,15 +1184,7 @@ s32 igb_blink_led(struct e1000_hw *hw) **/ s32 igb_led_off(struct e1000_hw *hw) { - u32 ctrl; - switch (hw->phy.media_type) { - case e1000_media_type_fiber: - ctrl = rd32(E1000_CTRL); - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - wr32(E1000_CTRL, ctrl); - break; case e1000_media_type_copper: wr32(E1000_LEDCTL, hw->mac.ledctl_mode1); break; diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 9598ac09f4b87942da669029352e502e263aa968..a9c37cb1bd7ab4aede5a9551831939173014e801 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -168,8 +168,7 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->duplex = -1; } - ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) || - hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; + ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE; return 0; } @@ -191,23 +190,18 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) if (ecmd->autoneg == AUTONEG_ENABLE) { hw->mac.autoneg = 1; - if (hw->phy.media_type == e1000_media_type_fiber) - hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE | - ADVERTISED_Autoneg; - else - hw->phy.autoneg_advertised = ecmd->advertising | - ADVERTISED_TP | - ADVERTISED_Autoneg; + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; ecmd->advertising = hw->phy.autoneg_advertised; - } else + } else { if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { clear_bit(__IGB_RESETTING, &adapter->state); return -EINVAL; } + } /* reset the link */ - if (netif_running(adapter->netdev)) { igb_down(adapter); igb_up(adapter); @@ -267,8 +261,8 @@ static int igb_set_pauseparam(struct net_device *netdev, } else igb_reset(adapter); } else - retval = ((hw->phy.media_type == e1000_media_type_fiber) ? - igb_setup_link(hw) : igb_force_mac_fc(hw)); + retval = ((hw->phy.media_type == e1000_media_type_copper) ? + igb_force_mac_fc(hw) : igb_setup_link(hw)); clear_bit(__IGB_RESETTING, &adapter->state); return retval; @@ -1483,8 +1477,7 @@ static int igb_setup_loopback_test(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; u32 reg; - if (hw->phy.media_type == e1000_media_type_fiber || - hw->phy.media_type == e1000_media_type_internal_serdes) { + if (hw->phy.media_type == e1000_media_type_internal_serdes) { reg = rd32(E1000_RCTL); reg |= E1000_RCTL_LBM_TCVR; wr32(E1000_RCTL, reg); diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index adb09d32625df3c2b4a565324f17927ed2db033d..39b3b6aa650b2179131ed10d30bcb188e8e60b7f 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2618,10 +2618,6 @@ static bool igb_has_link(struct igb_adapter *adapter) link_active = true; } break; - case e1000_media_type_fiber: - ret_val = hw->mac.ops.check_for_link(hw); - link_active = !!(rd32(E1000_STATUS) & E1000_STATUS_LU); - break; case e1000_media_type_internal_serdes: ret_val = hw->mac.ops.check_for_link(hw); link_active = hw->mac.serdes_has_link; @@ -5136,14 +5132,6 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx) mac->autoneg = 0; - /* Fiber NICs only allow 1000 gbps Full duplex */ - if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && - spddplx != (SPEED_1000 + DUPLEX_FULL)) { - dev_err(&adapter->pdev->dev, - "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; - } - switch (spddplx) { case SPEED_10 + DUPLEX_HALF: mac->forced_speed_duplex = ADVERTISE_10_HALF;