From dc6500bfe889321f7f4fd01e96062a80643d81c1 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 2 Jun 2014 10:09:47 +0100 Subject: [PATCH] mmc: mmci: add f_max to variant structure Some of the controller have maximum supported frequency, This patch adds support in variant data structure to specify such restrictions. This gives more flexibility in calculating the f_max before passing it to mmc-core. Signed-off-by: Srinivas Kandagatla Reviewed-by: Linus Walleij Signed-off-by: Ulf Hansson --- drivers/mmc/host/mmci.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 0a8cdac1f59c..b588810fd1a4 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -67,6 +67,7 @@ static unsigned int fmax = 515633; * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl * register * @pwrreg_powerup: power up value for MMCIPOWER register + * @f_max: maximum clk frequency supported by the controller. * @signal_direction: input/out direction of bus signals can be indicated * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock * @busy_detect: true if busy detection on dat0 is supported @@ -87,6 +88,7 @@ struct variant_data { bool blksz_datactrl16; bool blksz_datactrl4; u32 pwrreg_powerup; + u32 f_max; bool signal_direction; bool pwrreg_clkgate; bool busy_detect; @@ -98,6 +100,7 @@ static struct variant_data variant_arm = { .fifohalfsize = 8 * 4, .datalength_bits = 16, .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, }; static struct variant_data variant_arm_extended_fifo = { @@ -105,6 +108,7 @@ static struct variant_data variant_arm_extended_fifo = { .fifohalfsize = 64 * 4, .datalength_bits = 16, .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, }; static struct variant_data variant_arm_extended_fifo_hwfc = { @@ -113,6 +117,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = { .clkreg_enable = MCI_ARM_HWFCEN, .datalength_bits = 16, .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, }; static struct variant_data variant_u300 = { @@ -123,6 +128,7 @@ static struct variant_data variant_u300 = { .datalength_bits = 16, .sdio = true, .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, .signal_direction = true, .pwrreg_clkgate = true, .pwrreg_nopower = true, @@ -136,6 +142,7 @@ static struct variant_data variant_nomadik = { .sdio = true, .st_clkdiv = true, .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, .signal_direction = true, .pwrreg_clkgate = true, .pwrreg_nopower = true, @@ -152,6 +159,7 @@ static struct variant_data variant_ux500 = { .sdio = true, .st_clkdiv = true, .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, .signal_direction = true, .pwrreg_clkgate = true, .busy_detect = true, @@ -171,6 +179,7 @@ static struct variant_data variant_ux500v2 = { .st_clkdiv = true, .blksz_datactrl16 = true, .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, .signal_direction = true, .pwrreg_clkgate = true, .busy_detect = true, @@ -1473,8 +1482,8 @@ static int mmci_probe(struct amba_device *dev, * so we try to adjust the clock down to this, * (if possible). */ - if (host->mclk > 100000000) { - ret = clk_set_rate(host->clk, 100000000); + if (host->mclk > variant->f_max) { + ret = clk_set_rate(host->clk, variant->f_max); if (ret < 0) goto clk_disable; host->mclk = clk_get_rate(host->clk); -- GitLab