Merge branch 'MDIO-bus-reset-GPIO-cleanups'

Sergei Shtylyov says:

====================
MDIO bus reset GPIO cleanups

Commit 4c5e7a2c ("dt-bindings: mdio: Clarify binding document")
declared that a MDIO reset GPIO property should have only a single GPIO
reference/specifier, however the supporting code was left intact...
Here's a couple of the obvious cleanups to that code:

[1/2] mdio_bus: handle only single PHY reset GPIO
[2/2] mdio_bus: use devm_gpiod_get_optional()
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/phy/mdio_bus.c

@@ -353,34 +353,19 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 
 	mutex_init(&bus->mdio_lock);
 
-	/* de-assert bus level PHY GPIO resets */
-	if (bus->num_reset_gpios > 0) {
-		bus->reset_gpiod = devm_kcalloc(&bus->dev,
-						 bus->num_reset_gpios,
-						 sizeof(struct gpio_desc *),
-						 GFP_KERNEL);
-		if (!bus->reset_gpiod)
-			return -ENOMEM;
-	}
-
-	for (i = 0; i < bus->num_reset_gpios; i++) {
-		gpiod = devm_gpiod_get_index(&bus->dev, "reset", i,
-					     GPIOD_OUT_LOW);
+	/* de-assert bus level PHY GPIO reset */
+	gpiod = devm_gpiod_get_optional(&bus->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(gpiod)) {
-			err = PTR_ERR(gpiod);
-			if (err != -ENOENT) {
-				dev_err(&bus->dev,
-					"mii_bus %s couldn't get reset GPIO\n",
+		dev_err(&bus->dev, "mii_bus %s couldn't get reset GPIO\n",
 			bus->id);
-				return err;
-			}
-		} else {
-			bus->reset_gpiod[i] = gpiod;
+		return PTR_ERR(gpiod);
+	} else	if (gpiod) {
+		bus->reset_gpiod = gpiod;
+
 		gpiod_set_value_cansleep(gpiod, 1);
 		udelay(bus->reset_delay_us);
 		gpiod_set_value_cansleep(gpiod, 0);
 	}
-	}
 
 	if (bus->reset)
 		bus->reset(bus);
@@ -414,10 +399,8 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 	}
 
 	/* Put PHYs in RESET to save power */
-	for (i = 0; i < bus->num_reset_gpios; i++) {
-		if (bus->reset_gpiod[i])
-			gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
-	}
+	if (bus->reset_gpiod)
+		gpiod_set_value_cansleep(bus->reset_gpiod, 1);
 
 	device_del(&bus->dev);
 	return err;
@@ -442,10 +425,8 @@ void mdiobus_unregister(struct mii_bus *bus)
 	}
 
 	/* Put PHYs in RESET to save power */
-	for (i = 0; i < bus->num_reset_gpios; i++) {
-		if (bus->reset_gpiod[i])
-			gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
-	}
+	if (bus->reset_gpiod)
+		gpiod_set_value_cansleep(bus->reset_gpiod, 1);
 
 	device_del(&bus->dev);
 }

drivers/of/of_mdio.c

@@ -226,7 +226,6 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 	/* Get bus level PHY reset GPIO details */
 	mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
 	of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
-	mdio->num_reset_gpios = of_gpio_named_count(np, "reset-gpios");
 
 	/* Register the MDIO bus */
 	rc = mdiobus_register(mdio);

include/linux/phy.h

@@ -226,10 +226,8 @@ struct mii_bus {
 
 	/* GPIO reset pulse width in microseconds */
 	int reset_delay_us;
-	/* Number of reset GPIOs */
-	int num_reset_gpios;
-	/* Array of RESET GPIO descriptors */
-	struct gpio_desc **reset_gpiod;
+	/* RESET GPIO descriptor pointer */
+	struct gpio_desc *reset_gpiod;
 };
 #define to_mii_bus(d) container_of(d, struct mii_bus, dev)