提交 d8ecb349 编写于 作者: J John Holland 提交者: Nicolas Pitre

[ARM] eSATA SheevaPlug basic board support

Allow basic eSATA SheevaPlug board configuration and build.
Signed-off-by: NJohn Holland <john.holland@cellent-fs.de>
Signed-off-by: NNicolas Pitre <nico@marvell.com>
--
上级 0fa11802
......@@ -32,6 +32,12 @@ config MACH_SHEEVAPLUG
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
config MACH_ESATA_SHEEVAPLUG
bool "Marvell eSATA SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell eSATA SheevaPlug Reference Board.
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
help
......
......@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
......
......@@ -96,6 +96,7 @@ static void __init sheevaplug_init(void)
platform_device_register(&sheevaplug_leds);
}
#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
......@@ -106,3 +107,16 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册