diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index f2ff638cce8d078c87180e68b6b5271e4aa16d89..0d5e91379ae8ce7882844555731a8d77e04eacd3 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1269,7 +1269,7 @@ Fan control and monitoring: fan speed, fan enable/disable procfs: /proc/acpi/ibm/fan sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1, - pwm1_enable + pwm1_enable, fan2_input sysfs hwmon driver attributes: fan_watchdog NOTE NOTE NOTE: fan control operations are disabled by default for @@ -1282,6 +1282,9 @@ from the hardware registers of the embedded controller. This is known to work on later R, T, X and Z series ThinkPads but may show a bogus value on other models. +Some Lenovo ThinkPads support a secondary fan. This fan cannot be +controlled separately, it shares the main fan control. + Fan levels: Most ThinkPad fans work in "levels" at the firmware interface. Level 0 @@ -1412,6 +1415,11 @@ hwmon device attribute fan1_input: which can take up to two minutes. May return rubbish on older ThinkPads. +hwmon device attribute fan2_input: + Fan tachometer reading, in RPM, for the secondary fan. + Available only on some ThinkPads. If the secondary fan is + not installed, will always read 0. + hwmon driver attribute fan_watchdog: Fan safety watchdog timer interval, in seconds. Minimum is 1 second, maximum is 120 seconds. 0 disables the watchdog. diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index c8d74dbacbbd4646989d1c3867ba801afbf9c329..27ca676a7092e1fe98288e8757489b95131e8951 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -264,6 +264,7 @@ static struct { u32 wan:1; u32 uwb:1; u32 fan_ctrl_status_undef:1; + u32 second_fan:1; u32 beep_needs_two_args:1; u32 input_device_registered:1; u32 platform_drv_registered:1; @@ -6298,6 +6299,21 @@ static struct ibm_struct volume_driver_data = { * For firmware bugs, refer to: * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues * + * ---- + * + * ThinkPad EC register 0x31 bit 0 (only on select models) + * + * When bit 0 of EC register 0x31 is zero, the tachometer registers + * show the speed of the main fan. When bit 0 of EC register 0x31 + * is one, the tachometer registers show the speed of the auxiliary + * fan. + * + * Fan control seems to affect both fans, regardless of the state + * of this bit. + * + * So far, only the firmware for the X60/X61 non-tablet versions + * seem to support this (firmware TP-7M). + * * TPACPI_FAN_WR_ACPI_FANS: * ThinkPad X31, X40, X41. Not available in the X60. * @@ -6324,6 +6340,8 @@ enum { /* Fan control constants */ fan_status_offset = 0x2f, /* EC register 0x2f */ fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) * 0x84 must be read before 0x85 */ + fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M) + bit 0 selects which fan is active */ TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */ TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */ @@ -6417,6 +6435,38 @@ static void fan_quirk1_handle(u8 *fan_status) } } +/* Select main fan on X60/X61, NOOP on others */ +static bool fan_select_fan1(void) +{ + if (tp_features.second_fan) { + u8 val; + + if (ec_read(fan_select_offset, &val) < 0) + return false; + val &= 0xFEU; + if (ec_write(fan_select_offset, val) < 0) + return false; + } + return true; +} + +/* Select secondary fan on X60/X61 */ +static bool fan_select_fan2(void) +{ + u8 val; + + if (!tp_features.second_fan) + return false; + + if (ec_read(fan_select_offset, &val) < 0) + return false; + val |= 0x01U; + if (ec_write(fan_select_offset, val) < 0) + return false; + + return true; +} + /* * Call with fan_mutex held */ @@ -6494,6 +6544,8 @@ static int fan_get_speed(unsigned int *speed) switch (fan_status_access_mode) { case TPACPI_FAN_RD_TPEC: /* all except 570, 600e/x, 770e, 770x */ + if (unlikely(!fan_select_fan1())) + return -EIO; if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) || !acpi_ec_read(fan_rpm_offset + 1, &hi))) return -EIO; @@ -6510,6 +6562,34 @@ static int fan_get_speed(unsigned int *speed) return 0; } +static int fan2_get_speed(unsigned int *speed) +{ + u8 hi, lo; + bool rc; + + switch (fan_status_access_mode) { + case TPACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if (unlikely(!fan_select_fan2())) + return -EIO; + rc = !acpi_ec_read(fan_rpm_offset, &lo) || + !acpi_ec_read(fan_rpm_offset + 1, &hi); + fan_select_fan1(); /* play it safe */ + if (rc) + return -EIO; + + if (likely(speed)) + *speed = (hi << 8) | lo; + + break; + + default: + return -ENXIO; + } + + return 0; +} + static int fan_set_level(int level) { if (!fan_control_allowed) @@ -6915,6 +6995,25 @@ static struct device_attribute dev_attr_fan_fan1_input = __ATTR(fan1_input, S_IRUGO, fan_fan1_input_show, NULL); +/* sysfs fan fan2_input ------------------------------------------------ */ +static ssize_t fan_fan2_input_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int res; + unsigned int speed; + + res = fan2_get_speed(&speed); + if (res < 0) + return res; + + return snprintf(buf, PAGE_SIZE, "%u\n", speed); +} + +static struct device_attribute dev_attr_fan_fan2_input = + __ATTR(fan2_input, S_IRUGO, + fan_fan2_input_show, NULL); + /* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */ static ssize_t fan_fan_watchdog_show(struct device_driver *drv, char *buf) @@ -6948,6 +7047,7 @@ static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO, static struct attribute *fan_attributes[] = { &dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr, &dev_attr_fan_fan1_input.attr, + NULL, /* for fan2_input */ NULL }; @@ -6955,7 +7055,8 @@ static const struct attribute_group fan_attr_group = { .attrs = fan_attributes, }; -#define TPACPI_FAN_Q1 0x0001 +#define TPACPI_FAN_Q1 0x0001 /* Unitialized HFSP */ +#define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */ #define TPACPI_FAN_QI(__id1, __id2, __quirks) \ { .vendor = PCI_VENDOR_ID_IBM, \ @@ -6963,13 +7064,21 @@ static const struct attribute_group fan_attr_group = { .ec = TPID(__id1, __id2), \ .quirks = __quirks } +#define TPACPI_FAN_QL(__id1, __id2, __quirks) \ + { .vendor = PCI_VENDOR_ID_LENOVO, \ + .bios = TPACPI_MATCH_ANY, \ + .ec = TPID(__id1, __id2), \ + .quirks = __quirks } + static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1), TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1), TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1), TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1), + TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN), }; +#undef TPACPI_FAN_QL #undef TPACPI_FAN_QI static int __init fan_init(struct ibm_init_struct *iibm) @@ -6986,6 +7095,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) fan_control_commands = 0; fan_watchdog_maxinterval = 0; tp_features.fan_ctrl_status_undef = 0; + tp_features.second_fan = 0; fan_control_desired_level = 7; TPACPI_ACPIHANDLE_INIT(fans); @@ -7006,6 +7116,11 @@ static int __init fan_init(struct ibm_init_struct *iibm) fan_status_access_mode = TPACPI_FAN_RD_TPEC; if (quirks & TPACPI_FAN_Q1) fan_quirk1_setup(); + if (quirks & TPACPI_FAN_2FAN) { + tp_features.second_fan = 1; + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN, + "secondary fan support enabled\n"); + } } else { printk(TPACPI_ERR "ThinkPad ACPI EC access misbehaving, " @@ -7061,6 +7176,11 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (fan_status_access_mode != TPACPI_FAN_NONE || fan_control_access_mode != TPACPI_FAN_WR_NONE) { + if (tp_features.second_fan) { + /* attach second fan tachometer */ + fan_attributes[ARRAY_SIZE(fan_attributes)-2] = + &dev_attr_fan_fan2_input.attr; + } rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj, &fan_attr_group); if (rc < 0)