From d6b6d346e5605ee2af0f0349e71901121b984258 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 26 May 2015 19:33:58 -0300 Subject: [PATCH] [media] DocBook: better document FE_SET_VOLTAGE ioctl Use the proper format for FE_SET_VOLTAGE documentation and fix the documentation. The description for the enum is not 100%, and it is missing the voltage off value. Also, it is better to keep the enum description together with the ioctl, as both are used together. Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/dvb/fe-set-voltage.xml | 94 +++++++++++++++++++ Documentation/DocBook/media/dvb/frontend.xml | 62 +----------- include/uapi/linux/dvb/frontend.h | 6 +- 3 files changed, 99 insertions(+), 63 deletions(-) create mode 100644 Documentation/DocBook/media/dvb/fe-set-voltage.xml diff --git a/Documentation/DocBook/media/dvb/fe-set-voltage.xml b/Documentation/DocBook/media/dvb/fe-set-voltage.xml new file mode 100644 index 000000000000..a1ee5f9c28e0 --- /dev/null +++ b/Documentation/DocBook/media/dvb/fe-set-voltage.xml @@ -0,0 +1,94 @@ + + + ioctl FE_SET_VOLTAGE + &manvol; + + + + FE_SET_VOLTAGE + Allow setting the DC level sent to the antenna subsystem. + + + + + + int ioctl + int fd + int request + &fe-sec-voltage; *voltage + + + + + + Arguments + + + fd + + &fe_fd; + + + + request + + FE_SET_VOLTAGE + + + + pointer to &fe-sec-voltage; + + + + + + Description + +This ioctl allows to set the DC voltage level sent through the antenna + cable to 13V, 18V or off. +Usually, a satellital antenna subsystems require that the digital TV + device to send a DC voltage to feed power to the LNBf. Depending on the + LNBf type, the polarization or the intermediate frequency (IF) of the LNBf + can controlled by the voltage level. Other devices (for example, the ones + that implement DISEqC and multipoint LNBf's don't need to control the + voltage level, provided that either 13V or 18V is sent to power up the + LNBf. +NOTE: if more than one device is connected to the same antenna, + setting a voltage level may interfere on other devices, as they may lose + the capability of setting polarization or IF. So, on those + cases, setting the voltage to SEC_VOLTAGE_OFF while the device is not is + used is recommended. + +&return-value-dvb; + + +
+enum fe_sec_voltage + + + enum fe_status + + &cs-def; + + + ID + Description + + + + + SEC_VOLTAGE_13 + Set DC voltage level to 13V + + SEC_VOLTAGE_18 + Set DC voltage level to 18V + + SEC_VOLTAGE_OFF + Don't send any voltage to the antenna + + + +
+
+ + diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index bb2cd9ef3b03..584c759b6bbe 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -75,19 +75,6 @@ specification is available at -
-diseqc slave reply -The voltage is usually used with non-DiSEqC capable LNBs to switch the polarzation -(horizontal/vertical). When using DiSEqC epuipment this voltage has to be switched -consistently to the DiSEqC commands as described in the DiSEqC spec. - - typedef enum fe_sec_voltage { - SEC_VOLTAGE_13, - SEC_VOLTAGE_18 - } fe_sec_voltage_t; - -
-
SEC continuous tone @@ -641,54 +628,7 @@ typedef enum fe_hierarchy { &return-value-dvb;
-
-FE_SET_VOLTAGE -DESCRIPTION - - -This call is used to set the bus voltage. This call requires read/write - permissions. - - -SYNOPSIS - - -int ioctl(int fd, int request = FE_SET_VOLTAGE, - fe_sec_voltage_t voltage); - - - -PARAMETERS - - -int fd - -File descriptor returned by a previous call to open(). - - -int request - -Equals FE_SET_VOLTAGE for this command. - - -fe_sec_voltage_t - voltage - -The requested bus voltage. - - - -&return-value-dvb; -
- +&sub-fe-set-voltage; &sub-fe-enable-high-lnb-voltage; &sub-fe-set-frontend-tune-mode; diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index ae481bc53a9c..c1ccbc82024c 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -105,11 +105,13 @@ struct dvb_diseqc_slave_reply { }; /* errorcode when no message was received */ -typedef enum fe_sec_voltage { +enum fe_sec_voltage { SEC_VOLTAGE_13, SEC_VOLTAGE_18, SEC_VOLTAGE_OFF -} fe_sec_voltage_t; +}; + +typedef enum fe_sec_voltage fe_sec_voltage_t; typedef enum fe_sec_tone_mode { -- GitLab