diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
new file mode 100644
index 0000000000000000000000000000000000000000..fd459f00aa5a0f55107dc61d323d2a4738655332
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
@@ -0,0 +1,26 @@
+
+* Samsung Exynos NoC (Network on Chip) Probe device
+
+The Samsung Exynos542x SoC has NoC (Network on Chip) Probe for NoC bus.
+NoC provides the primitive values to get the performance data. The packets
+that the Network on Chip (NoC) probes detects are transported over
+the network infrastructure to observer units. You can configure probes to
+capture packets with header or data on the data request response network,
+or as traffic debug or statistic collectors. Exynos542x bus has multiple
+NoC probes to provide bandwidth information about behavior of the SoC
+that you can use while analyzing system performance.
+
+Required properties:
+- compatible: Should be "samsung,exynos5420-nocp"
+- reg: physical base address of each NoC Probe and length of memory mapped region.
+
+Optional properties:
+- clock-names : the name of clock used by the NoC Probe, "nocp"
+- clocks : phandles for clock specified in "clock-names" property
+
+Example : NoC Probe nodes in Device Tree are listed below.
+
+	nocp_mem0_0: nocp@10CA1000 {
+		compatible = "samsung,exynos5420-nocp";
+		reg = <0x10CA1000 0x200>;
+	};
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
new file mode 100644
index 0000000000000000000000000000000000000000..d3ec8e676b6bf306309b42bdd4678403a1682c82
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
@@ -0,0 +1,409 @@
+* Generic Exynos Bus frequency device
+
+The Samsung Exynos SoC has many buses for data transfer between DRAM
+and sub-blocks in SoC. Most Exynos SoCs share the common architecture
+for buses. Generally, each bus of Exynos SoC includes a source clock
+and a power line, which are able to change the clock frequency
+of the bus in runtime. To monitor the usage of each bus in runtime,
+the driver uses the PPMU (Platform Performance Monitoring Unit), which
+is able to measure the current load of sub-blocks.
+
+The Exynos SoC includes the various sub-blocks which have the each AXI bus.
+The each AXI bus has the owned source clock but, has not the only owned
+power line. The power line might be shared among one more sub-blocks.
+So, we can divide into two type of device as the role of each sub-block.
+There are two type of bus devices as following:
+- parent bus device
+- passive bus device
+
+Basically, parent and passive bus device share the same power line.
+The parent bus device can only change the voltage of shared power line
+and the rest bus devices (passive bus device) depend on the decision of
+the parent bus device. If there are three blocks which share the VDD_xxx
+power line, Only one block should be parent device and then the rest blocks
+should depend on the parent device as passive device.
+
+	VDD_xxx |--- A block (parent)
+		|--- B block (passive)
+		|--- C block (passive)
+
+There are a little different composition among Exynos SoC because each Exynos
+SoC has different sub-blocks. Therefore, such difference should be specified
+in devicetree file instead of each device driver. In result, this driver
+is able to support the bus frequency for all Exynos SoCs.
+
+Required properties for all bus devices:
+- compatible: Should be "samsung,exynos-bus".
+- clock-names : the name of clock used by the bus, "bus".
+- clocks : phandles for clock specified in "clock-names" property.
+- operating-points-v2: the OPP table including frequency/voltage information
+  to support DVFS (Dynamic Voltage/Frequency Scaling) feature.
+
+Required properties only for parent bus device:
+- vdd-supply: the regulator to provide the buses with the voltage.
+- devfreq-events: the devfreq-event device to monitor the current utilization
+  of buses.
+
+Required properties only for passive bus device:
+- devfreq: the parent bus device.
+
+Optional properties only for parent bus device:
+- exynos,saturation-ratio: the percentage value which is used to calibrate
+			the performance count against total cycle count.
+- exynos,voltage-tolerance: the percentage value for bus voltage tolerance
+			which is used to calculate the max voltage.
+
+Detailed correlation between sub-blocks and power line according to Exynos SoC:
+- In case of Exynos3250, there are two power line as following:
+	VDD_MIF |--- DMC
+
+	VDD_INT |--- LEFTBUS (parent device)
+		|--- PERIL
+		|--- MFC
+		|--- G3D
+		|--- RIGHTBUS
+		|--- PERIR
+		|--- FSYS
+		|--- LCD0
+		|--- PERIR
+		|--- ISP
+		|--- CAM
+
+- In case of Exynos4210, there is one power line as following:
+	VDD_INT |--- DMC (parent device)
+		|--- LEFTBUS
+		|--- PERIL
+		|--- MFC(L)
+		|--- G3D
+		|--- TV
+		|--- LCD0
+		|--- RIGHTBUS
+		|--- PERIR
+		|--- MFC(R)
+		|--- CAM
+		|--- FSYS
+		|--- GPS
+		|--- LCD0
+		|--- LCD1
+
+- In case of Exynos4x12, there are two power line as following:
+	VDD_MIF |--- DMC
+
+	VDD_INT |--- LEFTBUS (parent device)
+		|--- PERIL
+		|--- MFC(L)
+		|--- G3D
+		|--- TV
+		|--- IMAGE
+		|--- RIGHTBUS
+		|--- PERIR
+		|--- MFC(R)
+		|--- CAM
+		|--- FSYS
+		|--- GPS
+		|--- LCD0
+		|--- ISP
+
+- In case of Exynos5422, there are two power line as following:
+	VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
+	        |--- DREX 1
+
+	VDD_INT |--- NoC_Core (parent device)
+		|--- G2D
+		|--- G3D
+		|--- DISP1
+		|--- NoC_WCORE
+		|--- GSCL
+		|--- MSCL
+		|--- ISP
+		|--- MFC
+		|--- GEN
+		|--- PERIS
+		|--- PERIC
+		|--- FSYS
+		|--- FSYS2
+
+Example1:
+	Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
+	power line (regulator). The MIF (Memory Interface) AXI bus is used to
+	transfer data between DRAM and CPU and uses the VDD_MIF regulator.
+
+	- MIF (Memory Interface) block
+	: VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+	- INT (Internal) block
+	: VDD_INT |--- LEFTBUS (parent device)
+		  |--- PERIL
+		  |--- MFC
+		  |--- G3D
+		  |--- RIGHTBUS
+		  |--- FSYS
+		  |--- LCD0
+		  |--- PERIR
+		  |--- ISP
+		  |--- CAM
+
+	- MIF bus's frequency/voltage table
+	-----------------------
+	|Lv| Freq   | Voltage |
+	-----------------------
+	|L1| 50000  |800000   |
+	|L2| 100000 |800000   |
+	|L3| 134000 |800000   |
+	|L4| 200000 |825000   |
+	|L5| 400000 |875000   |
+	-----------------------
+
+	- INT bus's frequency/voltage table
+	----------------------------------------------------------
+	|Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
+	| name|       |LCD0    |       |       |       ||        |
+	|     |       |FSYS    |       |       |       ||        |
+	|     |       |MFC     |       |       |       ||        |
+	----------------------------------------------------------
+	|Mode |*parent|passive |passive|passive|passive||        |
+	----------------------------------------------------------
+	|Lv   |Frequency                               ||Voltage |
+	----------------------------------------------------------
+	|L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
+	|L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
+	|L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
+	|L4   |134000 |134000  |200000 |200000 |       ||1000000 |
+	|L5   |200000 |200000  |400000 |300000 |       ||1000000 |
+	----------------------------------------------------------
+
+Example2 :
+	The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi
+	is listed below:
+
+	bus_dmc: bus_dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_dmc CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <800000>;
+		};
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <800000>;
+		};
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <800000>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <825000>;
+		};
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <875000>;
+		};
+	};
+
+	bus_leftbus: bus_leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_rightbus: bus_rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_lcd0: bus_lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_fsys: bus_fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mcuisp: bus_mcuisp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_mcuisp_opp_table>;
+		status = "disabled";
+	};
+
+	bus_isp: bus_isp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_266>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_isp_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peril: bus_peril {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peril_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus_mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@80000000 {
+			opp-hz = /bits/ 64 <80000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
+	bus_mcuisp_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+		};
+		opp@80000000 {
+			opp-hz = /bits/ 64 <80000000>;
+		};
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+	};
+
+	bus_isp_opp_table: opp_table3 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+		};
+		opp@80000000 {
+			opp-hz = /bits/ 64 <80000000>;
+		};
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_peril_opp_table: opp_table4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+		};
+		opp@80000000 {
+			opp-hz = /bits/ 64 <80000000>;
+		};
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
+
+
+	Usage case to handle the frequency and voltage of bus on runtime
+	in exynos3250-rinato.dts is listed below:
+
+	&bus_dmc {
+		devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+		vdd-supply = <&buck1_reg>;	/* VDD_MIF */
+		status = "okay";
+	};
+
+	&bus_leftbus {
+		devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+		vdd-supply = <&buck3_reg>;
+		status = "okay";
+	};
+
+	&bus_rightbus {
+		devfreq = <&bus_leftbus>;
+		status = "okay";
+	};
+
+	&bus_lcd0 {
+		devfreq = <&bus_leftbus>;
+		status = "okay";
+	};
+
+	&bus_fsys {
+		devfreq = <&bus_leftbus>;
+		status = "okay";
+	};
+
+	&bus_mcuisp {
+		devfreq = <&bus_leftbus>;
+		status = "okay";
+	};
+
+	&bus_isp {
+		devfreq = <&bus_leftbus>;
+		status = "okay";
+	};
+
+	&bus_peril {
+		devfreq = <&bus_leftbus>;
+		status = "okay";
+	};
+
+	&bus_mfc {
+		devfreq = <&bus_leftbus>;
+		status = "okay";
+	};
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index c84fb47265ebc5cf82020e4b9f9d828fc009cd53..d23dc002a87e94840c1e68952f184eb4e7167933 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -37,8 +37,10 @@ Required properties:
   - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
   - "rockchip,rk3399-io-voltage-domain" for rk3399
   - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains
-- rockchip,grf: phandle to the syscon managing the "general register files"
 
+Deprecated properties:
+- rockchip,grf: phandle to the syscon managing the "general register files"
+    Systems should move the io-domains to a sub-node of the grf simple-mfd.
 
 You specify supplies using the standard regulator bindings by including
 a phandle the relevant regulator.  All specified supplies must be able
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 09126c2307d2b4d8f28476ce8285112c27bf934d..1b322c0c8dff89f314bcd0f5cc7afa508da9eaec 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1671,6 +1671,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		hwp_only
 			Only load intel_pstate on systems which support
 			hardware P state control (HWP) if available.
+		support_acpi_ppc
+			Enforce ACPI _PPC performance limits. If the Fixed ACPI
+			Description Table, specifies preferred power management
+			profile as "Enterprise Server" or "Performance Server",
+			then this feature is turned on by default.
 
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)
diff --git a/MAINTAINERS b/MAINTAINERS
index d2b9b80ffe30cb9aa9aebead2a33dbebcf2f3b35..f40d40d42030774f79ebdce8104c68f85b5bef31 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1322,6 +1322,7 @@ F:	drivers/rtc/rtc-armada38x.c
 F:	arch/arm/boot/dts/armada*
 F:	arch/arm/boot/dts/kirkwood*
 F:	arch/arm64/boot/dts/marvell/armada*
+F:	drivers/cpufreq/mvebu-cpufreq.c
 
 
 ARM/Marvell Berlin SoC support
@@ -3539,6 +3540,15 @@ F:	drivers/devfreq/devfreq-event.c
 F:	include/linux/devfreq-event.h
 F:	Documentation/devicetree/bindings/devfreq/event/
 
+BUS FREQUENCY DRIVER FOR SAMSUNG EXYNOS
+M:	Chanwoo Choi <cw00.choi@samsung.com>
+L:	linux-pm@vger.kernel.org
+L:	linux-samsung-soc@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq.git
+S:	Maintained
+F:	drivers/devfreq/exynos-bus.c
+F:	Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+
 DEVICE NUMBER REGISTRY
 M:	Torben Mathiasen <device@lanana.org>
 W:	http://lanana.org/docs/device-list/index.html
diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h
index 3848259bebf85786d39d4212d74f2e1646b98a44..baefe1d515174d77effa6195b4adde27ef35085f 100644
--- a/arch/arm/include/asm/cpuidle.h
+++ b/arch/arm/include/asm/cpuidle.h
@@ -36,7 +36,7 @@ struct cpuidle_ops {
 
 struct of_cpuidle_method {
 	const char *method;
-	struct cpuidle_ops *ops;
+	const struct cpuidle_ops *ops;
 };
 
 #define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops)			\
diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
index 703926e7007b4e0000b689006722780a02588e04..a44b268e12e1a2acbc1990afc8b5c2c65512256f 100644
--- a/arch/arm/kernel/cpuidle.c
+++ b/arch/arm/kernel/cpuidle.c
@@ -70,7 +70,7 @@ int arm_cpuidle_suspend(int index)
  *
  * Returns a struct cpuidle_ops pointer, NULL if not found.
  */
-static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method)
+static const struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method)
 {
 	struct of_cpuidle_method *m = __cpuidle_method_of_table;
 
@@ -88,7 +88,7 @@ static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method)
  *
  * Get the method name defined in the 'enable-method' property, retrieve the
  * associated cpuidle_ops and do a struct copy. This copy is needed because all
- * cpuidle_ops are tagged __initdata and will be unloaded after the init
+ * cpuidle_ops are tagged __initconst and will be unloaded after the init
  * process.
  *
  * Return 0 on sucess, -ENOENT if no 'enable-method' is defined, -EOPNOTSUPP if
@@ -97,7 +97,7 @@ static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method)
 static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu)
 {
 	const char *enable_method;
-	struct cpuidle_ops *ops;
+	const struct cpuidle_ops *ops;
 
 	enable_method = of_get_property(dn, "enable-method", NULL);
 	if (!enable_method)
diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
index 25d73870cccad498e98eab1c4a43666a36fbaa9c..ac181c6797ee5784c2f64d80ea1b1f4b2d0fc3b1 100644
--- a/arch/arm/mach-berlin/berlin.c
+++ b/arch/arm/mach-berlin/berlin.c
@@ -18,11 +18,6 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
-static void __init berlin_init_late(void)
-{
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
 static const char * const berlin_dt_compat[] = {
 	"marvell,berlin",
 	NULL,
@@ -30,7 +25,6 @@ static const char * const berlin_dt_compat[] = {
 
 DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
 	.dt_compat	= berlin_dt_compat,
-	.init_late	= berlin_init_late,
 	/*
 	 * with DT probing for L2CCs, berlin_init_machine can be removed.
 	 * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index bbf51a46f772d3a6d2b8a0e4f1546f783ec97022..4d3b056fd786e3a087d0c5837ea2ec2cbfc67cf7 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -213,33 +213,6 @@ static void __init exynos_init_irq(void)
 	exynos_map_pmu();
 }
 
-static const struct of_device_id exynos_cpufreq_matches[] = {
-	{ .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
-#ifndef CONFIG_BL_SWITCHER
-	{ .compatible = "samsung,exynos5420", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos5800", .data = "cpufreq-dt" },
-#endif
-	{ /* sentinel */ }
-};
-
-static void __init exynos_cpufreq_init(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	const struct of_device_id *match;
-
-	match = of_match_node(exynos_cpufreq_matches, root);
-	if (!match) {
-		platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
-		return;
-	}
-
-	platform_device_register_simple(match->data, -1, NULL, 0);
-}
-
 static void __init exynos_dt_machine_init(void)
 {
 	/*
@@ -262,8 +235,6 @@ static void __init exynos_dt_machine_init(void)
 	    of_machine_is_compatible("samsung,exynos5250"))
 		platform_device_register(&exynos_cpuidle);
 
-	exynos_cpufreq_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index bd42d1bd10aff1a1f0f28db8ea4fe3fac7ee4adc..530a728c2acc2d9e5d5e7398109de02fc58805ca 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -18,15 +18,6 @@
 #include "common.h"
 #include "mx27.h"
 
-static void __init imx27_dt_init(void)
-{
-	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	platform_device_register_full(&devinfo);
-}
-
 static const char * const imx27_dt_board_compat[] __initconst = {
 	"fsl,imx27",
 	NULL
@@ -36,6 +27,5 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
 	.init_irq	= mx27_init_irq,
-	.init_machine	= imx27_dt_init,
 	.dt_compat	= imx27_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index 6883fbaf9484b2da00324d42ce2ada3e70cefc66..10a82a4f1e5889894c04519cf257a7059e282191 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -50,13 +50,10 @@ static void __init imx51_ipu_mipi_setup(void)
 
 static void __init imx51_dt_init(void)
 {
-	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
-
 	imx51_ipu_mipi_setup();
 	imx_src_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	platform_device_register_full(&devinfo);
 }
 
 static void __init imx51_init_late(void)
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 86316a979297fbafdafb815e4a140a24540d4bc8..18b5c5c136db94aeb0456e3fd248f7943e7f85c2 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -40,8 +40,6 @@ static void __init imx53_dt_init(void)
 static void __init imx53_init_late(void)
 {
 	imx53_pm_init();
-
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 }
 
 static const char * const imx53_dt_board_compat[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index 5a27f20c9a82b84fbeb39a2dd402348c7e0c6862..b450f525a670961b79cd0b3d28271a238dba70a1 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -105,11 +105,6 @@ static void __init imx7d_init_irq(void)
 	irqchip_init();
 }
 
-static void __init imx7d_init_late(void)
-{
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
 static const char *const imx7d_dt_compat[] __initconst = {
 	"fsl,imx7d",
 	NULL,
@@ -117,7 +112,6 @@ static const char *const imx7d_dt_compat[] __initconst = {
 
 DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
 	.init_irq	= imx7d_init_irq,
-	.init_late	= imx7d_init_late,
 	.init_machine	= imx7d_init_machine,
 	.dt_compat	= imx7d_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index ed8fda4cd055848e871bb0f592b23735d4c843aa..b44442338e4e4730630e92b1a372d1b6a175bb8a 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -20,7 +20,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu_pm.h>
-#include <linux/cpufreq-dt.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -29,7 +28,6 @@
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
-#include <linux/pm_opp.h>
 #include <linux/resource.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
@@ -608,86 +606,3 @@ int mvebu_pmsu_dfs_request(int cpu)
 
 	return 0;
 }
-
-struct cpufreq_dt_platform_data cpufreq_dt_pd = {
-	.independent_clocks = true,
-};
-
-static int __init armada_xp_pmsu_cpufreq_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	int ret, cpu;
-
-	if (!of_machine_is_compatible("marvell,armadaxp"))
-		return 0;
-
-	/*
-	 * In order to have proper cpufreq handling, we need to ensure
-	 * that the Device Tree description of the CPU clock includes
-	 * the definition of the PMU DFS registers. If not, we do not
-	 * register the clock notifier and the cpufreq driver. This
-	 * piece of code is only for compatibility with old Device
-	 * Trees.
-	 */
-	np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
-	if (!np)
-		return 0;
-
-	ret = of_address_to_resource(np, 1, &res);
-	if (ret) {
-		pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
-		of_node_put(np);
-		return 0;
-	}
-
-	of_node_put(np);
-
-	/*
-	 * For each CPU, this loop registers the operating points
-	 * supported (which are the nominal CPU frequency and half of
-	 * it), and registers the clock notifier that will take care
-	 * of doing the PMSU part of a frequency transition.
-	 */
-	for_each_possible_cpu(cpu) {
-		struct device *cpu_dev;
-		struct clk *clk;
-		int ret;
-
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("Cannot get CPU %d\n", cpu);
-			continue;
-		}
-
-		clk = clk_get(cpu_dev, 0);
-		if (IS_ERR(clk)) {
-			pr_err("Cannot get clock for CPU %d\n", cpu);
-			return PTR_ERR(clk);
-		}
-
-		/*
-		 * In case of a failure of dev_pm_opp_add(), we don't
-		 * bother with cleaning up the registered OPP (there's
-		 * no function to do so), and simply cancel the
-		 * registration of the cpufreq device.
-		 */
-		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
-		if (ret) {
-			clk_put(clk);
-			return ret;
-		}
-
-		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
-		if (ret) {
-			clk_put(clk);
-			return ret;
-		}
-	}
-
-	platform_device_register_data(NULL, "cpufreq-dt", -1,
-				      &cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
-	return 0;
-}
-
-device_initcall(armada_xp_pmsu_cpufreq_init);
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 58920bc8807bce963536296bc7914db421c2b6aa..2f7b11da7d5d9ce23e0399aaf240d4ef73edacf1 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -277,13 +277,10 @@ static void __init omap4_init_voltages(void)
 
 static inline void omap_init_cpufreq(void)
 {
-	struct platform_device_info devinfo = { };
+	struct platform_device_info devinfo = { .name = "omap-cpufreq" };
 
 	if (!of_have_populated_dt())
-		devinfo.name = "omap-cpufreq";
-	else
-		devinfo.name = "cpufreq-dt";
-	platform_device_register_full(&devinfo);
+		platform_device_register_full(&devinfo);
 }
 
 static int __init omap2_common_pm_init(void)
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 3f07cc5dfe5fc594b75361a62417e76ff6cfc550..beb71da5d9c8feb8a482b1179a61d61499212318 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -74,7 +74,6 @@ static void __init rockchip_dt_init(void)
 {
 	rockchip_suspend_init();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	platform_device_register_simple("cpufreq-dt", 0, NULL, 0);
 }
 
 static const char * const rockchip_board_dt_compat[] = {
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index a65c80ac9009d51f1e54fd0b07e58336d8241e02..c9ea0e6ff4f906dcc49bb410aa252c13692972a3 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -38,7 +38,6 @@ smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # PM objects
 obj-$(CONFIG_SUSPEND)		+= suspend.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 obj-$(CONFIG_PM_RCAR)		+= pm-rcar.o
 obj-$(CONFIG_PM_RMOBILE)	+= pm-rmobile.o
 obj-$(CONFIG_ARCH_RCAR_GEN2)	+= pm-rcar-gen2.o
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 5464b7a75e3028a792e4718a2cc68b8dd7a1fc0b..3b562d87826d74100d861373c039df8f995cd6e0 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -25,16 +25,9 @@ static inline int shmobile_suspend_init(void) { return 0; }
 static inline void shmobile_smp_apmu_suspend_init(void) { }
 #endif
 
-#ifdef CONFIG_CPU_FREQ
-int shmobile_cpufreq_init(void);
-#else
-static inline int shmobile_cpufreq_init(void) { return 0; }
-#endif
-
 static inline void __init shmobile_init_late(void)
 {
 	shmobile_suspend_init();
-	shmobile_cpufreq_init();
 }
 
 #endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c
deleted file mode 100644
index 634d701c56a7463d9b93b005498362d29e14b777..0000000000000000000000000000000000000000
--- a/arch/arm/mach-shmobile/cpufreq.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * CPUFreq support code for SH-Mobile ARM
- *
- *  Copyright (C) 2014 Gaku Inami
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/platform_device.h>
-
-#include "common.h"
-
-int __init shmobile_cpufreq_init(void)
-{
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-	return 0;
-}
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 3c156190a1d44223027b4c9a37ab67550219854b..95dca8c2c9edcd5a72276dd05ab8572c7dd7bd9e 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -17,11 +17,6 @@
 
 #include <asm/mach/arch.h>
 
-static void __init sunxi_dt_cpufreq_init(void)
-{
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
 static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun4i-a10",
 	"allwinner,sun5i-a10s",
@@ -32,7 +27,6 @@ static const char * const sunxi_board_dt_compat[] = {
 
 DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families")
 	.dt_compat	= sunxi_board_dt_compat,
-	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
 
 static const char * const sun6i_board_dt_compat[] = {
@@ -53,7 +47,6 @@ static void __init sun6i_timer_init(void)
 DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
 	.init_time	= sun6i_timer_init,
 	.dt_compat	= sun6i_board_dt_compat,
-	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
 
 static const char * const sun7i_board_dt_compat[] = {
@@ -63,7 +56,6 @@ static const char * const sun7i_board_dt_compat[] = {
 
 DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
 	.dt_compat	= sun7i_board_dt_compat,
-	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
 
 static const char * const sun8i_board_dt_compat[] = {
@@ -77,7 +69,6 @@ static const char * const sun8i_board_dt_compat[] = {
 DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family")
 	.init_time	= sun6i_timer_init,
 	.dt_compat	= sun8i_board_dt_compat,
-	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
 
 static const char * const sun9i_board_dt_compat[] = {
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 860ffb663f02b1c08c15c55f1c3fbf7638e610a8..da876d28ccbc53c1e82f042bcf5f5e730ed2b976 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -110,7 +110,6 @@ static void __init zynq_init_late(void)
  */
 static void __init zynq_init_machine(void)
 {
-	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
 	struct soc_device_attribute *soc_dev_attr;
 	struct soc_device *soc_dev;
 	struct device *parent = NULL;
@@ -145,7 +144,6 @@ static void __init zynq_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	platform_device_register(&zynq_cpuidle_device);
-	platform_device_register_full(&devinfo);
 }
 
 static void __init zynq_timer_init(void)
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 0e64a1b5e62a0a768b568da8ed7dbc6554e11060..3657ac1cb801509e1715a0e0841c7c3920cf4595 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -159,7 +159,7 @@ int of_pm_clk_add_clks(struct device *dev)
 
 	count = of_count_phandle_with_args(dev->of_node, "clocks",
 					   "#clock-cells");
-	if (count == 0)
+	if (count <= 0)
 		return -ENODEV;
 
 	clks = kcalloc(count, sizeof(*clks), GFP_KERNEL);
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 56705b52758efea0fb8a95dab16700b4ecf7930e..de23b648fce3b9273bf75611b9286b712ac1e666 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -229,17 +229,6 @@ static int genpd_poweron(struct generic_pm_domain *genpd, unsigned int depth)
 	return ret;
 }
 
-static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev)
-{
-	return GENPD_DEV_CALLBACK(genpd, int, save_state, dev);
-}
-
-static int genpd_restore_dev(struct generic_pm_domain *genpd,
-			struct device *dev)
-{
-	return GENPD_DEV_CALLBACK(genpd, int, restore_state, dev);
-}
-
 static int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
 				     unsigned long val, void *ptr)
 {
@@ -372,17 +361,63 @@ static void genpd_power_off_work_fn(struct work_struct *work)
 }
 
 /**
- * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain.
+ * __genpd_runtime_suspend - walk the hierarchy of ->runtime_suspend() callbacks
+ * @dev: Device to handle.
+ */
+static int __genpd_runtime_suspend(struct device *dev)
+{
+	int (*cb)(struct device *__dev);
+
+	if (dev->type && dev->type->pm)
+		cb = dev->type->pm->runtime_suspend;
+	else if (dev->class && dev->class->pm)
+		cb = dev->class->pm->runtime_suspend;
+	else if (dev->bus && dev->bus->pm)
+		cb = dev->bus->pm->runtime_suspend;
+	else
+		cb = NULL;
+
+	if (!cb && dev->driver && dev->driver->pm)
+		cb = dev->driver->pm->runtime_suspend;
+
+	return cb ? cb(dev) : 0;
+}
+
+/**
+ * __genpd_runtime_resume - walk the hierarchy of ->runtime_resume() callbacks
+ * @dev: Device to handle.
+ */
+static int __genpd_runtime_resume(struct device *dev)
+{
+	int (*cb)(struct device *__dev);
+
+	if (dev->type && dev->type->pm)
+		cb = dev->type->pm->runtime_resume;
+	else if (dev->class && dev->class->pm)
+		cb = dev->class->pm->runtime_resume;
+	else if (dev->bus && dev->bus->pm)
+		cb = dev->bus->pm->runtime_resume;
+	else
+		cb = NULL;
+
+	if (!cb && dev->driver && dev->driver->pm)
+		cb = dev->driver->pm->runtime_resume;
+
+	return cb ? cb(dev) : 0;
+}
+
+/**
+ * genpd_runtime_suspend - Suspend a device belonging to I/O PM domain.
  * @dev: Device to suspend.
  *
  * Carry out a runtime suspend of a device under the assumption that its
  * pm_domain field points to the domain member of an object of type
  * struct generic_pm_domain representing a PM domain consisting of I/O devices.
  */
-static int pm_genpd_runtime_suspend(struct device *dev)
+static int genpd_runtime_suspend(struct device *dev)
 {
 	struct generic_pm_domain *genpd;
-	bool (*stop_ok)(struct device *__dev);
+	bool (*suspend_ok)(struct device *__dev);
 	struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
 	bool runtime_pm = pm_runtime_enabled(dev);
 	ktime_t time_start;
@@ -401,21 +436,21 @@ static int pm_genpd_runtime_suspend(struct device *dev)
 	 * runtime PM is disabled. Under these circumstances, we shall skip
 	 * validating/measuring the PM QoS latency.
 	 */
-	stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL;
-	if (runtime_pm && stop_ok && !stop_ok(dev))
+	suspend_ok = genpd->gov ? genpd->gov->suspend_ok : NULL;
+	if (runtime_pm && suspend_ok && !suspend_ok(dev))
 		return -EBUSY;
 
 	/* Measure suspend latency. */
 	if (runtime_pm)
 		time_start = ktime_get();
 
-	ret = genpd_save_dev(genpd, dev);
+	ret = __genpd_runtime_suspend(dev);
 	if (ret)
 		return ret;
 
 	ret = genpd_stop_dev(genpd, dev);
 	if (ret) {
-		genpd_restore_dev(genpd, dev);
+		__genpd_runtime_resume(dev);
 		return ret;
 	}
 
@@ -446,14 +481,14 @@ static int pm_genpd_runtime_suspend(struct device *dev)
 }
 
 /**
- * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
+ * genpd_runtime_resume - Resume a device belonging to I/O PM domain.
  * @dev: Device to resume.
  *
  * Carry out a runtime resume of a device under the assumption that its
  * pm_domain field points to the domain member of an object of type
  * struct generic_pm_domain representing a PM domain consisting of I/O devices.
  */
-static int pm_genpd_runtime_resume(struct device *dev)
+static int genpd_runtime_resume(struct device *dev)
 {
 	struct generic_pm_domain *genpd;
 	struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
@@ -491,7 +526,7 @@ static int pm_genpd_runtime_resume(struct device *dev)
 	if (ret)
 		goto err_poweroff;
 
-	ret = genpd_restore_dev(genpd, dev);
+	ret = __genpd_runtime_resume(dev);
 	if (ret)
 		goto err_stop;
 
@@ -695,15 +730,6 @@ static int pm_genpd_prepare(struct device *dev)
 	 * at this point and a system wakeup event should be reported if it's
 	 * set up to wake up the system from sleep states.
 	 */
-	pm_runtime_get_noresume(dev);
-	if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
-		pm_wakeup_event(dev, 0);
-
-	if (pm_wakeup_pending()) {
-		pm_runtime_put(dev);
-		return -EBUSY;
-	}
-
 	if (resume_needed(dev, genpd))
 		pm_runtime_resume(dev);
 
@@ -716,10 +742,8 @@ static int pm_genpd_prepare(struct device *dev)
 
 	mutex_unlock(&genpd->lock);
 
-	if (genpd->suspend_power_off) {
-		pm_runtime_put_noidle(dev);
+	if (genpd->suspend_power_off)
 		return 0;
-	}
 
 	/*
 	 * The PM domain must be in the GPD_STATE_ACTIVE state at this point,
@@ -741,7 +765,6 @@ static int pm_genpd_prepare(struct device *dev)
 		pm_runtime_enable(dev);
 	}
 
-	pm_runtime_put(dev);
 	return ret;
 }
 
@@ -1427,54 +1450,6 @@ int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
 }
 EXPORT_SYMBOL_GPL(pm_genpd_remove_subdomain);
 
-/* Default device callbacks for generic PM domains. */
-
-/**
- * pm_genpd_default_save_state - Default "save device state" for PM domains.
- * @dev: Device to handle.
- */
-static int pm_genpd_default_save_state(struct device *dev)
-{
-	int (*cb)(struct device *__dev);
-
-	if (dev->type && dev->type->pm)
-		cb = dev->type->pm->runtime_suspend;
-	else if (dev->class && dev->class->pm)
-		cb = dev->class->pm->runtime_suspend;
-	else if (dev->bus && dev->bus->pm)
-		cb = dev->bus->pm->runtime_suspend;
-	else
-		cb = NULL;
-
-	if (!cb && dev->driver && dev->driver->pm)
-		cb = dev->driver->pm->runtime_suspend;
-
-	return cb ? cb(dev) : 0;
-}
-
-/**
- * pm_genpd_default_restore_state - Default PM domains "restore device state".
- * @dev: Device to handle.
- */
-static int pm_genpd_default_restore_state(struct device *dev)
-{
-	int (*cb)(struct device *__dev);
-
-	if (dev->type && dev->type->pm)
-		cb = dev->type->pm->runtime_resume;
-	else if (dev->class && dev->class->pm)
-		cb = dev->class->pm->runtime_resume;
-	else if (dev->bus && dev->bus->pm)
-		cb = dev->bus->pm->runtime_resume;
-	else
-		cb = NULL;
-
-	if (!cb && dev->driver && dev->driver->pm)
-		cb = dev->driver->pm->runtime_resume;
-
-	return cb ? cb(dev) : 0;
-}
-
 /**
  * pm_genpd_init - Initialize a generic I/O PM domain object.
  * @genpd: PM domain object to initialize.
@@ -1498,8 +1473,8 @@ void pm_genpd_init(struct generic_pm_domain *genpd,
 	genpd->device_count = 0;
 	genpd->max_off_time_ns = -1;
 	genpd->max_off_time_changed = true;
-	genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend;
-	genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume;
+	genpd->domain.ops.runtime_suspend = genpd_runtime_suspend;
+	genpd->domain.ops.runtime_resume = genpd_runtime_resume;
 	genpd->domain.ops.prepare = pm_genpd_prepare;
 	genpd->domain.ops.suspend = pm_genpd_suspend;
 	genpd->domain.ops.suspend_late = pm_genpd_suspend_late;
@@ -1520,8 +1495,6 @@ void pm_genpd_init(struct generic_pm_domain *genpd,
 	genpd->domain.ops.restore_early = pm_genpd_resume_early;
 	genpd->domain.ops.restore = pm_genpd_resume;
 	genpd->domain.ops.complete = pm_genpd_complete;
-	genpd->dev_ops.save_state = pm_genpd_default_save_state;
-	genpd->dev_ops.restore_state = pm_genpd_default_restore_state;
 
 	if (genpd->flags & GENPD_FLAG_PM_CLK) {
 		genpd->dev_ops.stop = pm_clk_suspend;
diff --git a/drivers/base/power/domain_governor.c b/drivers/base/power/domain_governor.c
index 00a5436dd44b6ca056eab506c5b4f05d17eb5f49..2e0fce711135cd68d5c6ee72e23b62eaa1825b69 100644
--- a/drivers/base/power/domain_governor.c
+++ b/drivers/base/power/domain_governor.c
@@ -37,10 +37,10 @@ static int dev_update_qos_constraint(struct device *dev, void *data)
 }
 
 /**
- * default_stop_ok - Default PM domain governor routine for stopping devices.
+ * default_suspend_ok - Default PM domain governor routine to suspend devices.
  * @dev: Device to check.
  */
-static bool default_stop_ok(struct device *dev)
+static bool default_suspend_ok(struct device *dev)
 {
 	struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
 	unsigned long flags;
@@ -51,13 +51,13 @@ static bool default_stop_ok(struct device *dev)
 	spin_lock_irqsave(&dev->power.lock, flags);
 
 	if (!td->constraint_changed) {
-		bool ret = td->cached_stop_ok;
+		bool ret = td->cached_suspend_ok;
 
 		spin_unlock_irqrestore(&dev->power.lock, flags);
 		return ret;
 	}
 	td->constraint_changed = false;
-	td->cached_stop_ok = false;
+	td->cached_suspend_ok = false;
 	td->effective_constraint_ns = -1;
 	constraint_ns = __dev_pm_qos_read_value(dev);
 
@@ -83,13 +83,13 @@ static bool default_stop_ok(struct device *dev)
 			return false;
 	}
 	td->effective_constraint_ns = constraint_ns;
-	td->cached_stop_ok = constraint_ns >= 0;
+	td->cached_suspend_ok = constraint_ns >= 0;
 
 	/*
 	 * The children have been suspended already, so we don't need to take
-	 * their stop latencies into account here.
+	 * their suspend latencies into account here.
 	 */
-	return td->cached_stop_ok;
+	return td->cached_suspend_ok;
 }
 
 /**
@@ -150,7 +150,7 @@ static bool __default_power_down_ok(struct dev_pm_domain *pd,
 		 */
 		td = &to_gpd_data(pdd)->td;
 		constraint_ns = td->effective_constraint_ns;
-		/* default_stop_ok() need not be called before us. */
+		/* default_suspend_ok() need not be called before us. */
 		if (constraint_ns < 0) {
 			constraint_ns = dev_pm_qos_read_value(pdd->dev);
 			constraint_ns *= NSEC_PER_USEC;
@@ -227,7 +227,7 @@ static bool always_on_power_down_ok(struct dev_pm_domain *domain)
 }
 
 struct dev_power_governor simple_qos_governor = {
-	.stop_ok = default_stop_ok,
+	.suspend_ok = default_suspend_ok,
 	.power_down_ok = default_power_down_ok,
 };
 
@@ -236,5 +236,5 @@ struct dev_power_governor simple_qos_governor = {
  */
 struct dev_power_governor pm_domain_always_on_gov = {
 	.power_down_ok = always_on_power_down_ok,
-	.stop_ok = default_stop_ok,
+	.suspend_ok = default_suspend_ok,
 };
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 6e7c3ccea24bbd3d2c10e199fe4b2018477a8a0c..c81667d4bb6028cdaa73c12490100d5f5406cfc6 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1556,7 +1556,6 @@ int dpm_suspend(pm_message_t state)
 static int device_prepare(struct device *dev, pm_message_t state)
 {
 	int (*callback)(struct device *) = NULL;
-	char *info = NULL;
 	int ret = 0;
 
 	if (dev->power.syscore)
@@ -1579,24 +1578,17 @@ static int device_prepare(struct device *dev, pm_message_t state)
 		goto unlock;
 	}
 
-	if (dev->pm_domain) {
-		info = "preparing power domain ";
+	if (dev->pm_domain)
 		callback = dev->pm_domain->ops.prepare;
-	} else if (dev->type && dev->type->pm) {
-		info = "preparing type ";
+	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->prepare;
-	} else if (dev->class && dev->class->pm) {
-		info = "preparing class ";
+	else if (dev->class && dev->class->pm)
 		callback = dev->class->pm->prepare;
-	} else if (dev->bus && dev->bus->pm) {
-		info = "preparing bus ";
+	else if (dev->bus && dev->bus->pm)
 		callback = dev->bus->pm->prepare;
-	}
 
-	if (!callback && dev->driver && dev->driver->pm) {
-		info = "preparing driver ";
+	if (!callback && dev->driver && dev->driver->pm)
 		callback = dev->driver->pm->prepare;
-	}
 
 	if (callback)
 		ret = callback(dev);
diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
index 19837ef04d8ef21a355e22171117398b2f966f80..e70ceb406fe9171f8b3dd1cc2fced28fcbe3e778 100644
--- a/drivers/base/power/opp/Makefile
+++ b/drivers/base/power/opp/Makefile
@@ -1,3 +1,4 @@
 ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
 obj-y				+= core.o cpu.o
+obj-$(CONFIG_OF)		+= of.o
 obj-$(CONFIG_DEBUG_FS)		+= debugfs.o
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index d8f4cc22856c924b1be7bf1aa97f175b6579c554..7c04c87738a69d13b28060fe5dfa9b095798709e 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -18,7 +18,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/device.h>
-#include <linux/of.h>
 #include <linux/export.h>
 #include <linux/regulator/consumer.h>
 
@@ -29,7 +28,7 @@
  * from here, with each opp_table containing the list of opps it supports in
  * various states of availability.
  */
-static LIST_HEAD(opp_tables);
+LIST_HEAD(opp_tables);
 /* Lock to allow exclusive modification to the device and opp lists */
 DEFINE_MUTEX(opp_table_lock);
 
@@ -53,26 +52,6 @@ static struct opp_device *_find_opp_dev(const struct device *dev,
 	return NULL;
 }
 
-static struct opp_table *_managed_opp(const struct device_node *np)
-{
-	struct opp_table *opp_table;
-
-	list_for_each_entry_rcu(opp_table, &opp_tables, node) {
-		if (opp_table->np == np) {
-			/*
-			 * Multiple devices can point to the same OPP table and
-			 * so will have same node-pointer, np.
-			 *
-			 * But the OPPs will be considered as shared only if the
-			 * OPP table contains a "opp-shared" property.
-			 */
-			return opp_table->shared_opp ? opp_table : NULL;
-		}
-	}
-
-	return NULL;
-}
-
 /**
  * _find_opp_table() - find opp_table struct using device pointer
  * @dev:	device pointer used to lookup OPP table
@@ -757,7 +736,6 @@ static struct opp_table *_add_opp_table(struct device *dev)
 {
 	struct opp_table *opp_table;
 	struct opp_device *opp_dev;
-	struct device_node *np;
 	int ret;
 
 	/* Check for existing table for 'dev' first */
@@ -781,20 +759,7 @@ static struct opp_table *_add_opp_table(struct device *dev)
 		return NULL;
 	}
 
-	/*
-	 * Only required for backward compatibility with v1 bindings, but isn't
-	 * harmful for other cases. And so we do it unconditionally.
-	 */
-	np = of_node_get(dev->of_node);
-	if (np) {
-		u32 val;
-
-		if (!of_property_read_u32(np, "clock-latency", &val))
-			opp_table->clock_latency_ns_max = val;
-		of_property_read_u32(np, "voltage-tolerance",
-				     &opp_table->voltage_tolerance_v1);
-		of_node_put(np);
-	}
+	_of_init_opp_table(opp_table, dev);
 
 	/* Set regulator to a non-NULL error value */
 	opp_table->regulator = ERR_PTR(-ENXIO);
@@ -890,8 +855,8 @@ static void _kfree_opp_rcu(struct rcu_head *head)
  * It is assumed that the caller holds required mutex for an RCU updater
  * strategy.
  */
-static void _opp_remove(struct opp_table *opp_table,
-			struct dev_pm_opp *opp, bool notify)
+void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp,
+		 bool notify)
 {
 	/*
 	 * Notify the changes in the availability of the operable
@@ -952,8 +917,8 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_remove);
 
-static struct dev_pm_opp *_allocate_opp(struct device *dev,
-					struct opp_table **opp_table)
+struct dev_pm_opp *_allocate_opp(struct device *dev,
+				 struct opp_table **opp_table)
 {
 	struct dev_pm_opp *opp;
 
@@ -989,8 +954,8 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
 	return true;
 }
 
-static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
-		    struct opp_table *opp_table)
+int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
+	     struct opp_table *opp_table)
 {
 	struct dev_pm_opp *opp;
 	struct list_head *head = &opp_table->opp_list;
@@ -1066,8 +1031,8 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
  *		Duplicate OPPs (both freq and volt are same) and !opp->available
  * -ENOMEM	Memory allocation failure
  */
-static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
-		       bool dynamic)
+int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
+		bool dynamic)
 {
 	struct opp_table *opp_table;
 	struct dev_pm_opp *new_opp;
@@ -1112,83 +1077,6 @@ static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
 	return ret;
 }
 
-/* TODO: Support multiple regulators */
-static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
-			      struct opp_table *opp_table)
-{
-	u32 microvolt[3] = {0};
-	u32 val;
-	int count, ret;
-	struct property *prop = NULL;
-	char name[NAME_MAX];
-
-	/* Search for "opp-microvolt-<name>" */
-	if (opp_table->prop_name) {
-		snprintf(name, sizeof(name), "opp-microvolt-%s",
-			 opp_table->prop_name);
-		prop = of_find_property(opp->np, name, NULL);
-	}
-
-	if (!prop) {
-		/* Search for "opp-microvolt" */
-		sprintf(name, "opp-microvolt");
-		prop = of_find_property(opp->np, name, NULL);
-
-		/* Missing property isn't a problem, but an invalid entry is */
-		if (!prop)
-			return 0;
-	}
-
-	count = of_property_count_u32_elems(opp->np, name);
-	if (count < 0) {
-		dev_err(dev, "%s: Invalid %s property (%d)\n",
-			__func__, name, count);
-		return count;
-	}
-
-	/* There can be one or three elements here */
-	if (count != 1 && count != 3) {
-		dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
-			__func__, name, count);
-		return -EINVAL;
-	}
-
-	ret = of_property_read_u32_array(opp->np, name, microvolt, count);
-	if (ret) {
-		dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
-		return -EINVAL;
-	}
-
-	opp->u_volt = microvolt[0];
-
-	if (count == 1) {
-		opp->u_volt_min = opp->u_volt;
-		opp->u_volt_max = opp->u_volt;
-	} else {
-		opp->u_volt_min = microvolt[1];
-		opp->u_volt_max = microvolt[2];
-	}
-
-	/* Search for "opp-microamp-<name>" */
-	prop = NULL;
-	if (opp_table->prop_name) {
-		snprintf(name, sizeof(name), "opp-microamp-%s",
-			 opp_table->prop_name);
-		prop = of_find_property(opp->np, name, NULL);
-	}
-
-	if (!prop) {
-		/* Search for "opp-microamp" */
-		sprintf(name, "opp-microamp");
-		prop = of_find_property(opp->np, name, NULL);
-	}
-
-	if (prop && !of_property_read_u32(opp->np, name, &val))
-		opp->u_amp = val;
-
-	return 0;
-}
-
 /**
  * dev_pm_opp_set_supported_hw() - Set supported platforms
  * @dev: Device for which supported-hw has to be set.
@@ -1517,144 +1405,6 @@ void dev_pm_opp_put_regulator(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);
 
-static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
-			      struct device_node *np)
-{
-	unsigned int count = opp_table->supported_hw_count;
-	u32 version;
-	int ret;
-
-	if (!opp_table->supported_hw)
-		return true;
-
-	while (count--) {
-		ret = of_property_read_u32_index(np, "opp-supported-hw", count,
-						 &version);
-		if (ret) {
-			dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
-				 __func__, count, ret);
-			return false;
-		}
-
-		/* Both of these are bitwise masks of the versions */
-		if (!(version & opp_table->supported_hw[count]))
-			return false;
-	}
-
-	return true;
-}
-
-/**
- * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
- * @dev:	device for which we do this operation
- * @np:		device node
- *
- * This function adds an opp definition to the opp table and returns status. The
- * opp can be controlled using dev_pm_opp_enable/disable functions and may be
- * removed by dev_pm_opp_remove.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function internally uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- *
- * Return:
- * 0		On success OR
- *		Duplicate OPPs (both freq and volt are same) and opp->available
- * -EEXIST	Freq are same and volt are different OR
- *		Duplicate OPPs (both freq and volt are same) and !opp->available
- * -ENOMEM	Memory allocation failure
- * -EINVAL	Failed parsing the OPP node
- */
-static int _opp_add_static_v2(struct device *dev, struct device_node *np)
-{
-	struct opp_table *opp_table;
-	struct dev_pm_opp *new_opp;
-	u64 rate;
-	u32 val;
-	int ret;
-
-	/* Hold our table modification lock here */
-	mutex_lock(&opp_table_lock);
-
-	new_opp = _allocate_opp(dev, &opp_table);
-	if (!new_opp) {
-		ret = -ENOMEM;
-		goto unlock;
-	}
-
-	ret = of_property_read_u64(np, "opp-hz", &rate);
-	if (ret < 0) {
-		dev_err(dev, "%s: opp-hz not found\n", __func__);
-		goto free_opp;
-	}
-
-	/* Check if the OPP supports hardware's hierarchy of versions or not */
-	if (!_opp_is_supported(dev, opp_table, np)) {
-		dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
-		goto free_opp;
-	}
-
-	/*
-	 * Rate is defined as an unsigned long in clk API, and so casting
-	 * explicitly to its type. Must be fixed once rate is 64 bit
-	 * guaranteed in clk API.
-	 */
-	new_opp->rate = (unsigned long)rate;
-	new_opp->turbo = of_property_read_bool(np, "turbo-mode");
-
-	new_opp->np = np;
-	new_opp->dynamic = false;
-	new_opp->available = true;
-
-	if (!of_property_read_u32(np, "clock-latency-ns", &val))
-		new_opp->clock_latency_ns = val;
-
-	ret = opp_parse_supplies(new_opp, dev, opp_table);
-	if (ret)
-		goto free_opp;
-
-	ret = _opp_add(dev, new_opp, opp_table);
-	if (ret)
-		goto free_opp;
-
-	/* OPP to select on device suspend */
-	if (of_property_read_bool(np, "opp-suspend")) {
-		if (opp_table->suspend_opp) {
-			dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
-				 __func__, opp_table->suspend_opp->rate,
-				 new_opp->rate);
-		} else {
-			new_opp->suspend = true;
-			opp_table->suspend_opp = new_opp;
-		}
-	}
-
-	if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max)
-		opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;
-
-	mutex_unlock(&opp_table_lock);
-
-	pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
-		 __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt,
-		 new_opp->u_volt_min, new_opp->u_volt_max,
-		 new_opp->clock_latency_ns);
-
-	/*
-	 * Notify the changes in the availability of the operable
-	 * frequency/voltage list.
-	 */
-	srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp);
-	return 0;
-
-free_opp:
-	_opp_remove(opp_table, new_opp, false);
-unlock:
-	mutex_unlock(&opp_table_lock);
-	return ret;
-}
-
 /**
  * dev_pm_opp_add()  - Add an OPP table from a table definitions
  * @dev:	device for which we do this operation
@@ -1842,21 +1592,11 @@ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
 
-#ifdef CONFIG_OF
-/**
- * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
- *				  entries
- * @dev:	device pointer used to lookup OPP table.
- *
- * Free OPPs created using static entries present in DT.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function indirectly uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
+/*
+ * Free OPPs either created using static entries present in DT or even the
+ * dynamically added entries based on remove_all param.
  */
-void dev_pm_opp_of_remove_table(struct device *dev)
+void _dev_pm_opp_remove_table(struct device *dev, bool remove_all)
 {
 	struct opp_table *opp_table;
 	struct dev_pm_opp *opp, *tmp;
@@ -1881,7 +1621,7 @@ void dev_pm_opp_of_remove_table(struct device *dev)
 	if (list_is_singular(&opp_table->dev_list)) {
 		/* Free static OPPs */
 		list_for_each_entry_safe(opp, tmp, &opp_table->opp_list, node) {
-			if (!opp->dynamic)
+			if (remove_all || !opp->dynamic)
 				_opp_remove(opp_table, opp, true);
 		}
 	} else {
@@ -1891,160 +1631,22 @@ void dev_pm_opp_of_remove_table(struct device *dev)
 unlock:
 	mutex_unlock(&opp_table_lock);
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
-
-/* Returns opp descriptor node for a device, caller must do of_node_put() */
-struct device_node *_of_get_opp_desc_node(struct device *dev)
-{
-	/*
-	 * TODO: Support for multiple OPP tables.
-	 *
-	 * There should be only ONE phandle present in "operating-points-v2"
-	 * property.
-	 */
-
-	return of_parse_phandle(dev->of_node, "operating-points-v2", 0);
-}
-
-/* Initializes OPP tables based on new bindings */
-static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
-{
-	struct device_node *np;
-	struct opp_table *opp_table;
-	int ret = 0, count = 0;
-
-	mutex_lock(&opp_table_lock);
-
-	opp_table = _managed_opp(opp_np);
-	if (opp_table) {
-		/* OPPs are already managed */
-		if (!_add_opp_dev(dev, opp_table))
-			ret = -ENOMEM;
-		mutex_unlock(&opp_table_lock);
-		return ret;
-	}
-	mutex_unlock(&opp_table_lock);
-
-	/* We have opp-table node now, iterate over it and add OPPs */
-	for_each_available_child_of_node(opp_np, np) {
-		count++;
-
-		ret = _opp_add_static_v2(dev, np);
-		if (ret) {
-			dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
-				ret);
-			goto free_table;
-		}
-	}
-
-	/* There should be one of more OPP defined */
-	if (WARN_ON(!count))
-		return -ENOENT;
-
-	mutex_lock(&opp_table_lock);
-
-	opp_table = _find_opp_table(dev);
-	if (WARN_ON(IS_ERR(opp_table))) {
-		ret = PTR_ERR(opp_table);
-		mutex_unlock(&opp_table_lock);
-		goto free_table;
-	}
-
-	opp_table->np = opp_np;
-	opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared");
-
-	mutex_unlock(&opp_table_lock);
-
-	return 0;
-
-free_table:
-	dev_pm_opp_of_remove_table(dev);
-
-	return ret;
-}
-
-/* Initializes OPP tables based on old-deprecated bindings */
-static int _of_add_opp_table_v1(struct device *dev)
-{
-	const struct property *prop;
-	const __be32 *val;
-	int nr;
-
-	prop = of_find_property(dev->of_node, "operating-points", NULL);
-	if (!prop)
-		return -ENODEV;
-	if (!prop->value)
-		return -ENODATA;
-
-	/*
-	 * Each OPP is a set of tuples consisting of frequency and
-	 * voltage like <freq-kHz vol-uV>.
-	 */
-	nr = prop->length / sizeof(u32);
-	if (nr % 2) {
-		dev_err(dev, "%s: Invalid OPP table\n", __func__);
-		return -EINVAL;
-	}
-
-	val = prop->value;
-	while (nr) {
-		unsigned long freq = be32_to_cpup(val++) * 1000;
-		unsigned long volt = be32_to_cpup(val++);
-
-		if (_opp_add_v1(dev, freq, volt, false))
-			dev_warn(dev, "%s: Failed to add OPP %ld\n",
-				 __func__, freq);
-		nr -= 2;
-	}
-
-	return 0;
-}
 
 /**
- * dev_pm_opp_of_add_table() - Initialize opp table from device tree
+ * dev_pm_opp_remove_table() - Free all OPPs associated with the device
  * @dev:	device pointer used to lookup OPP table.
  *
- * Register the initial OPP table with the OPP library for given device.
+ * Free both OPPs created using static entries present in DT and the
+ * dynamically added entries.
  *
  * Locking: The internal opp_table and opp structures are RCU protected.
  * Hence this function indirectly uses RCU updater strategy with mutex locks
  * to keep the integrity of the internal data structures. Callers should ensure
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
- *
- * Return:
- * 0		On success OR
- *		Duplicate OPPs (both freq and volt are same) and opp->available
- * -EEXIST	Freq are same and volt are different OR
- *		Duplicate OPPs (both freq and volt are same) and !opp->available
- * -ENOMEM	Memory allocation failure
- * -ENODEV	when 'operating-points' property is not found or is invalid data
- *		in device node.
- * -ENODATA	when empty 'operating-points' property is found
- * -EINVAL	when invalid entries are found in opp-v2 table
  */
-int dev_pm_opp_of_add_table(struct device *dev)
+void dev_pm_opp_remove_table(struct device *dev)
 {
-	struct device_node *opp_np;
-	int ret;
-
-	/*
-	 * OPPs have two version of bindings now. The older one is deprecated,
-	 * try for the new binding first.
-	 */
-	opp_np = _of_get_opp_desc_node(dev);
-	if (!opp_np) {
-		/*
-		 * Try old-deprecated bindings for backward compatibility with
-		 * older dtbs.
-		 */
-		return _of_add_opp_table_v1(dev);
-	}
-
-	ret = _of_add_opp_table_v2(dev, opp_np);
-	of_node_put(opp_np);
-
-	return ret;
+	_dev_pm_opp_remove_table(dev, true);
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
-#endif
+EXPORT_SYMBOL_GPL(dev_pm_opp_remove_table);
diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
index ba2bdbd932ef3c1ebaff47c6203bddb27fe9c03b..83d6e7ba1a343db48a3de678a3ba5b7df973c221 100644
--- a/drivers/base/power/opp/cpu.c
+++ b/drivers/base/power/opp/cpu.c
@@ -18,7 +18,6 @@
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/export.h>
-#include <linux/of.h>
 #include <linux/slab.h>
 
 #include "opp.h"
@@ -119,8 +118,66 @@ void dev_pm_opp_free_cpufreq_table(struct device *dev,
 EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
 #endif	/* CONFIG_CPU_FREQ */
 
-/* Required only for V1 bindings, as v2 can manage it from DT itself */
-int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of)
+{
+	struct device *cpu_dev;
+	int cpu;
+
+	WARN_ON(cpumask_empty(cpumask));
+
+	for_each_cpu(cpu, cpumask) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__,
+			       cpu);
+			continue;
+		}
+
+		if (of)
+			dev_pm_opp_of_remove_table(cpu_dev);
+		else
+			dev_pm_opp_remove_table(cpu_dev);
+	}
+}
+
+/**
+ * dev_pm_opp_cpumask_remove_table() - Removes OPP table for @cpumask
+ * @cpumask:	cpumask for which OPP table needs to be removed
+ *
+ * This removes the OPP tables for CPUs present in the @cpumask.
+ * This should be used to remove all the OPPs entries associated with
+ * the cpus in @cpumask.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask)
+{
+	_dev_pm_opp_cpumask_remove_table(cpumask, false);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_remove_table);
+
+/**
+ * dev_pm_opp_set_sharing_cpus() - Mark OPP table as shared by few CPUs
+ * @cpu_dev:	CPU device for which we do this operation
+ * @cpumask:	cpumask of the CPUs which share the OPP table with @cpu_dev
+ *
+ * This marks OPP table of the @cpu_dev as shared by the CPUs present in
+ * @cpumask.
+ *
+ * Returns -ENODEV if OPP table isn't already present.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev,
+				const struct cpumask *cpumask)
 {
 	struct opp_device *opp_dev;
 	struct opp_table *opp_table;
@@ -131,7 +188,7 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 
 	opp_table = _find_opp_table(cpu_dev);
 	if (IS_ERR(opp_table)) {
-		ret = -EINVAL;
+		ret = PTR_ERR(opp_table);
 		goto unlock;
 	}
 
@@ -152,6 +209,9 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 				__func__, cpu);
 			continue;
 		}
+
+		/* Mark opp-table as multiple CPUs are sharing it now */
+		opp_table->shared_opp = true;
 	}
 unlock:
 	mutex_unlock(&opp_table_lock);
@@ -160,112 +220,47 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
 
-#ifdef CONFIG_OF
-void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
-{
-	struct device *cpu_dev;
-	int cpu;
-
-	WARN_ON(cpumask_empty(cpumask));
-
-	for_each_cpu(cpu, cpumask) {
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__,
-			       cpu);
-			continue;
-		}
-
-		dev_pm_opp_of_remove_table(cpu_dev);
-	}
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
-
-int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
-{
-	struct device *cpu_dev;
-	int cpu, ret = 0;
-
-	WARN_ON(cpumask_empty(cpumask));
-
-	for_each_cpu(cpu, cpumask) {
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__,
-			       cpu);
-			continue;
-		}
-
-		ret = dev_pm_opp_of_add_table(cpu_dev);
-		if (ret) {
-			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
-			       __func__, cpu, ret);
-
-			/* Free all other OPPs */
-			dev_pm_opp_of_cpumask_remove_table(cpumask);
-			break;
-		}
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
-
-/*
- * Works only for OPP v2 bindings.
+/**
+ * dev_pm_opp_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with @cpu_dev
+ * @cpu_dev:	CPU device for which we do this operation
+ * @cpumask:	cpumask to update with information of sharing CPUs
+ *
+ * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev.
  *
- * Returns -ENOENT if operating-points-v2 bindings aren't supported.
+ * Returns -ENODEV if OPP table isn't already present.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
  */
-int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
 {
-	struct device_node *np, *tmp_np;
-	struct device *tcpu_dev;
-	int cpu, ret = 0;
-
-	/* Get OPP descriptor node */
-	np = _of_get_opp_desc_node(cpu_dev);
-	if (!np) {
-		dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__);
-		return -ENOENT;
-	}
-
-	cpumask_set_cpu(cpu_dev->id, cpumask);
-
-	/* OPPs are shared ? */
-	if (!of_property_read_bool(np, "opp-shared"))
-		goto put_cpu_node;
-
-	for_each_possible_cpu(cpu) {
-		if (cpu == cpu_dev->id)
-			continue;
+	struct opp_device *opp_dev;
+	struct opp_table *opp_table;
+	int ret = 0;
 
-		tcpu_dev = get_cpu_device(cpu);
-		if (!tcpu_dev) {
-			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
-				__func__, cpu);
-			ret = -ENODEV;
-			goto put_cpu_node;
-		}
+	mutex_lock(&opp_table_lock);
 
-		/* Get OPP descriptor node */
-		tmp_np = _of_get_opp_desc_node(tcpu_dev);
-		if (!tmp_np) {
-			dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n",
-				__func__);
-			ret = -ENOENT;
-			goto put_cpu_node;
-		}
+	opp_table = _find_opp_table(cpu_dev);
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+		goto unlock;
+	}
 
-		/* CPUs are sharing opp node */
-		if (np == tmp_np)
-			cpumask_set_cpu(cpu, cpumask);
+	cpumask_clear(cpumask);
 
-		of_node_put(tmp_np);
+	if (opp_table->shared_opp) {
+		list_for_each_entry(opp_dev, &opp_table->dev_list, node)
+			cpumask_set_cpu(opp_dev->dev->id, cpumask);
+	} else {
+		cpumask_set_cpu(cpu_dev->id, cpumask);
 	}
 
-put_cpu_node:
-	of_node_put(np);
+unlock:
+	mutex_unlock(&opp_table_lock);
+
 	return ret;
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
-#endif
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus);
diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c
new file mode 100644
index 0000000000000000000000000000000000000000..94d2010558e363f7991c89e9c0e3037822b761ae
--- /dev/null
+++ b/drivers/base/power/opp/of.c
@@ -0,0 +1,591 @@
+/*
+ * Generic OPP OF helpers
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated.
+ *	Nishanth Menon
+ *	Romit Dasgupta
+ *	Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/export.h>
+
+#include "opp.h"
+
+static struct opp_table *_managed_opp(const struct device_node *np)
+{
+	struct opp_table *opp_table;
+
+	list_for_each_entry_rcu(opp_table, &opp_tables, node) {
+		if (opp_table->np == np) {
+			/*
+			 * Multiple devices can point to the same OPP table and
+			 * so will have same node-pointer, np.
+			 *
+			 * But the OPPs will be considered as shared only if the
+			 * OPP table contains a "opp-shared" property.
+			 */
+			return opp_table->shared_opp ? opp_table : NULL;
+		}
+	}
+
+	return NULL;
+}
+
+void _of_init_opp_table(struct opp_table *opp_table, struct device *dev)
+{
+	struct device_node *np;
+
+	/*
+	 * Only required for backward compatibility with v1 bindings, but isn't
+	 * harmful for other cases. And so we do it unconditionally.
+	 */
+	np = of_node_get(dev->of_node);
+	if (np) {
+		u32 val;
+
+		if (!of_property_read_u32(np, "clock-latency", &val))
+			opp_table->clock_latency_ns_max = val;
+		of_property_read_u32(np, "voltage-tolerance",
+				     &opp_table->voltage_tolerance_v1);
+		of_node_put(np);
+	}
+}
+
+static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
+			      struct device_node *np)
+{
+	unsigned int count = opp_table->supported_hw_count;
+	u32 version;
+	int ret;
+
+	if (!opp_table->supported_hw)
+		return true;
+
+	while (count--) {
+		ret = of_property_read_u32_index(np, "opp-supported-hw", count,
+						 &version);
+		if (ret) {
+			dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
+				 __func__, count, ret);
+			return false;
+		}
+
+		/* Both of these are bitwise masks of the versions */
+		if (!(version & opp_table->supported_hw[count]))
+			return false;
+	}
+
+	return true;
+}
+
+/* TODO: Support multiple regulators */
+static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
+			      struct opp_table *opp_table)
+{
+	u32 microvolt[3] = {0};
+	u32 val;
+	int count, ret;
+	struct property *prop = NULL;
+	char name[NAME_MAX];
+
+	/* Search for "opp-microvolt-<name>" */
+	if (opp_table->prop_name) {
+		snprintf(name, sizeof(name), "opp-microvolt-%s",
+			 opp_table->prop_name);
+		prop = of_find_property(opp->np, name, NULL);
+	}
+
+	if (!prop) {
+		/* Search for "opp-microvolt" */
+		sprintf(name, "opp-microvolt");
+		prop = of_find_property(opp->np, name, NULL);
+
+		/* Missing property isn't a problem, but an invalid entry is */
+		if (!prop)
+			return 0;
+	}
+
+	count = of_property_count_u32_elems(opp->np, name);
+	if (count < 0) {
+		dev_err(dev, "%s: Invalid %s property (%d)\n",
+			__func__, name, count);
+		return count;
+	}
+
+	/* There can be one or three elements here */
+	if (count != 1 && count != 3) {
+		dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
+			__func__, name, count);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32_array(opp->np, name, microvolt, count);
+	if (ret) {
+		dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
+		return -EINVAL;
+	}
+
+	opp->u_volt = microvolt[0];
+
+	if (count == 1) {
+		opp->u_volt_min = opp->u_volt;
+		opp->u_volt_max = opp->u_volt;
+	} else {
+		opp->u_volt_min = microvolt[1];
+		opp->u_volt_max = microvolt[2];
+	}
+
+	/* Search for "opp-microamp-<name>" */
+	prop = NULL;
+	if (opp_table->prop_name) {
+		snprintf(name, sizeof(name), "opp-microamp-%s",
+			 opp_table->prop_name);
+		prop = of_find_property(opp->np, name, NULL);
+	}
+
+	if (!prop) {
+		/* Search for "opp-microamp" */
+		sprintf(name, "opp-microamp");
+		prop = of_find_property(opp->np, name, NULL);
+	}
+
+	if (prop && !of_property_read_u32(opp->np, name, &val))
+		opp->u_amp = val;
+
+	return 0;
+}
+
+/**
+ * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
+ *				  entries
+ * @dev:	device pointer used to lookup OPP table.
+ *
+ * Free OPPs created using static entries present in DT.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function indirectly uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_of_remove_table(struct device *dev)
+{
+	_dev_pm_opp_remove_table(dev, false);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
+
+/* Returns opp descriptor node for a device, caller must do of_node_put() */
+struct device_node *_of_get_opp_desc_node(struct device *dev)
+{
+	/*
+	 * TODO: Support for multiple OPP tables.
+	 *
+	 * There should be only ONE phandle present in "operating-points-v2"
+	 * property.
+	 */
+
+	return of_parse_phandle(dev->of_node, "operating-points-v2", 0);
+}
+
+/**
+ * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
+ * @dev:	device for which we do this operation
+ * @np:		device node
+ *
+ * This function adds an opp definition to the opp table and returns status. The
+ * opp can be controlled using dev_pm_opp_enable/disable functions and may be
+ * removed by dev_pm_opp_remove.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ *
+ * Return:
+ * 0		On success OR
+ *		Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST	Freq are same and volt are different OR
+ *		Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM	Memory allocation failure
+ * -EINVAL	Failed parsing the OPP node
+ */
+static int _opp_add_static_v2(struct device *dev, struct device_node *np)
+{
+	struct opp_table *opp_table;
+	struct dev_pm_opp *new_opp;
+	u64 rate;
+	u32 val;
+	int ret;
+
+	/* Hold our table modification lock here */
+	mutex_lock(&opp_table_lock);
+
+	new_opp = _allocate_opp(dev, &opp_table);
+	if (!new_opp) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	ret = of_property_read_u64(np, "opp-hz", &rate);
+	if (ret < 0) {
+		dev_err(dev, "%s: opp-hz not found\n", __func__);
+		goto free_opp;
+	}
+
+	/* Check if the OPP supports hardware's hierarchy of versions or not */
+	if (!_opp_is_supported(dev, opp_table, np)) {
+		dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
+		goto free_opp;
+	}
+
+	/*
+	 * Rate is defined as an unsigned long in clk API, and so casting
+	 * explicitly to its type. Must be fixed once rate is 64 bit
+	 * guaranteed in clk API.
+	 */
+	new_opp->rate = (unsigned long)rate;
+	new_opp->turbo = of_property_read_bool(np, "turbo-mode");
+
+	new_opp->np = np;
+	new_opp->dynamic = false;
+	new_opp->available = true;
+
+	if (!of_property_read_u32(np, "clock-latency-ns", &val))
+		new_opp->clock_latency_ns = val;
+
+	ret = opp_parse_supplies(new_opp, dev, opp_table);
+	if (ret)
+		goto free_opp;
+
+	ret = _opp_add(dev, new_opp, opp_table);
+	if (ret)
+		goto free_opp;
+
+	/* OPP to select on device suspend */
+	if (of_property_read_bool(np, "opp-suspend")) {
+		if (opp_table->suspend_opp) {
+			dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
+				 __func__, opp_table->suspend_opp->rate,
+				 new_opp->rate);
+		} else {
+			new_opp->suspend = true;
+			opp_table->suspend_opp = new_opp;
+		}
+	}
+
+	if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max)
+		opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;
+
+	mutex_unlock(&opp_table_lock);
+
+	pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
+		 __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt,
+		 new_opp->u_volt_min, new_opp->u_volt_max,
+		 new_opp->clock_latency_ns);
+
+	/*
+	 * Notify the changes in the availability of the operable
+	 * frequency/voltage list.
+	 */
+	srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp);
+	return 0;
+
+free_opp:
+	_opp_remove(opp_table, new_opp, false);
+unlock:
+	mutex_unlock(&opp_table_lock);
+	return ret;
+}
+
+/* Initializes OPP tables based on new bindings */
+static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
+{
+	struct device_node *np;
+	struct opp_table *opp_table;
+	int ret = 0, count = 0;
+
+	mutex_lock(&opp_table_lock);
+
+	opp_table = _managed_opp(opp_np);
+	if (opp_table) {
+		/* OPPs are already managed */
+		if (!_add_opp_dev(dev, opp_table))
+			ret = -ENOMEM;
+		mutex_unlock(&opp_table_lock);
+		return ret;
+	}
+	mutex_unlock(&opp_table_lock);
+
+	/* We have opp-table node now, iterate over it and add OPPs */
+	for_each_available_child_of_node(opp_np, np) {
+		count++;
+
+		ret = _opp_add_static_v2(dev, np);
+		if (ret) {
+			dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
+				ret);
+			goto free_table;
+		}
+	}
+
+	/* There should be one of more OPP defined */
+	if (WARN_ON(!count))
+		return -ENOENT;
+
+	mutex_lock(&opp_table_lock);
+
+	opp_table = _find_opp_table(dev);
+	if (WARN_ON(IS_ERR(opp_table))) {
+		ret = PTR_ERR(opp_table);
+		mutex_unlock(&opp_table_lock);
+		goto free_table;
+	}
+
+	opp_table->np = opp_np;
+	opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared");
+
+	mutex_unlock(&opp_table_lock);
+
+	return 0;
+
+free_table:
+	dev_pm_opp_of_remove_table(dev);
+
+	return ret;
+}
+
+/* Initializes OPP tables based on old-deprecated bindings */
+static int _of_add_opp_table_v1(struct device *dev)
+{
+	const struct property *prop;
+	const __be32 *val;
+	int nr;
+
+	prop = of_find_property(dev->of_node, "operating-points", NULL);
+	if (!prop)
+		return -ENODEV;
+	if (!prop->value)
+		return -ENODATA;
+
+	/*
+	 * Each OPP is a set of tuples consisting of frequency and
+	 * voltage like <freq-kHz vol-uV>.
+	 */
+	nr = prop->length / sizeof(u32);
+	if (nr % 2) {
+		dev_err(dev, "%s: Invalid OPP table\n", __func__);
+		return -EINVAL;
+	}
+
+	val = prop->value;
+	while (nr) {
+		unsigned long freq = be32_to_cpup(val++) * 1000;
+		unsigned long volt = be32_to_cpup(val++);
+
+		if (_opp_add_v1(dev, freq, volt, false))
+			dev_warn(dev, "%s: Failed to add OPP %ld\n",
+				 __func__, freq);
+		nr -= 2;
+	}
+
+	return 0;
+}
+
+/**
+ * dev_pm_opp_of_add_table() - Initialize opp table from device tree
+ * @dev:	device pointer used to lookup OPP table.
+ *
+ * Register the initial OPP table with the OPP library for given device.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function indirectly uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ *
+ * Return:
+ * 0		On success OR
+ *		Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST	Freq are same and volt are different OR
+ *		Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM	Memory allocation failure
+ * -ENODEV	when 'operating-points' property is not found or is invalid data
+ *		in device node.
+ * -ENODATA	when empty 'operating-points' property is found
+ * -EINVAL	when invalid entries are found in opp-v2 table
+ */
+int dev_pm_opp_of_add_table(struct device *dev)
+{
+	struct device_node *opp_np;
+	int ret;
+
+	/*
+	 * OPPs have two version of bindings now. The older one is deprecated,
+	 * try for the new binding first.
+	 */
+	opp_np = _of_get_opp_desc_node(dev);
+	if (!opp_np) {
+		/*
+		 * Try old-deprecated bindings for backward compatibility with
+		 * older dtbs.
+		 */
+		return _of_add_opp_table_v1(dev);
+	}
+
+	ret = _of_add_opp_table_v2(dev, opp_np);
+	of_node_put(opp_np);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
+
+/* CPU device specific helpers */
+
+/**
+ * dev_pm_opp_of_cpumask_remove_table() - Removes OPP table for @cpumask
+ * @cpumask:	cpumask for which OPP table needs to be removed
+ *
+ * This removes the OPP tables for CPUs present in the @cpumask.
+ * This should be used only to remove static entries created from DT.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask)
+{
+	_dev_pm_opp_cpumask_remove_table(cpumask, true);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
+
+/**
+ * dev_pm_opp_of_cpumask_add_table() - Adds OPP table for @cpumask
+ * @cpumask:	cpumask for which OPP table needs to be added.
+ *
+ * This adds the OPP tables for CPUs present in the @cpumask.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask)
+{
+	struct device *cpu_dev;
+	int cpu, ret = 0;
+
+	WARN_ON(cpumask_empty(cpumask));
+
+	for_each_cpu(cpu, cpumask) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__,
+			       cpu);
+			continue;
+		}
+
+		ret = dev_pm_opp_of_add_table(cpu_dev);
+		if (ret) {
+			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
+			       __func__, cpu, ret);
+
+			/* Free all other OPPs */
+			dev_pm_opp_of_cpumask_remove_table(cpumask);
+			break;
+		}
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
+
+/*
+ * Works only for OPP v2 bindings.
+ *
+ * Returns -ENOENT if operating-points-v2 bindings aren't supported.
+ */
+/**
+ * dev_pm_opp_of_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with
+ *				      @cpu_dev using operating-points-v2
+ *				      bindings.
+ *
+ * @cpu_dev:	CPU device for which we do this operation
+ * @cpumask:	cpumask to update with information of sharing CPUs
+ *
+ * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev.
+ *
+ * Returns -ENOENT if operating-points-v2 isn't present for @cpu_dev.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev,
+				   struct cpumask *cpumask)
+{
+	struct device_node *np, *tmp_np;
+	struct device *tcpu_dev;
+	int cpu, ret = 0;
+
+	/* Get OPP descriptor node */
+	np = _of_get_opp_desc_node(cpu_dev);
+	if (!np) {
+		dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__);
+		return -ENOENT;
+	}
+
+	cpumask_set_cpu(cpu_dev->id, cpumask);
+
+	/* OPPs are shared ? */
+	if (!of_property_read_bool(np, "opp-shared"))
+		goto put_cpu_node;
+
+	for_each_possible_cpu(cpu) {
+		if (cpu == cpu_dev->id)
+			continue;
+
+		tcpu_dev = get_cpu_device(cpu);
+		if (!tcpu_dev) {
+			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+				__func__, cpu);
+			ret = -ENODEV;
+			goto put_cpu_node;
+		}
+
+		/* Get OPP descriptor node */
+		tmp_np = _of_get_opp_desc_node(tcpu_dev);
+		if (!tmp_np) {
+			dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n",
+				__func__);
+			ret = -ENOENT;
+			goto put_cpu_node;
+		}
+
+		/* CPUs are sharing opp node */
+		if (np == tmp_np)
+			cpumask_set_cpu(cpu, cpumask);
+
+		of_node_put(tmp_np);
+	}
+
+put_cpu_node:
+	of_node_put(np);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index f67f806fcf3ae8f13866336cdc54958bd57f59b9..20f3be22e060f38761c9f949d776b33e7de756f0 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -28,6 +28,8 @@ struct regulator;
 /* Lock to allow exclusive modification to the device and opp lists */
 extern struct mutex opp_table_lock;
 
+extern struct list_head opp_tables;
+
 /*
  * Internal data structure organization with the OPP layer library is as
  * follows:
@@ -183,6 +185,18 @@ struct opp_table {
 struct opp_table *_find_opp_table(struct device *dev);
 struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table);
 struct device_node *_of_get_opp_desc_node(struct device *dev);
+void _dev_pm_opp_remove_table(struct device *dev, bool remove_all);
+struct dev_pm_opp *_allocate_opp(struct device *dev, struct opp_table **opp_table);
+int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table);
+void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp, bool notify);
+int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, bool dynamic);
+void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of);
+
+#ifdef CONFIG_OF
+void _of_init_opp_table(struct opp_table *opp_table, struct device *dev);
+#else
+static inline void _of_init_opp_table(struct opp_table *opp_table, struct device *dev) {}
+#endif
 
 #ifdef CONFIG_DEBUG_FS
 void opp_debug_remove_one(struct dev_pm_opp *opp);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 4c7055009bd6ac88477458cf3fc551a966d2ad37..b746904185045a9092865030006f28350c9a9916 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -1506,11 +1506,16 @@ int pm_runtime_force_resume(struct device *dev)
 		goto out;
 	}
 
-	ret = callback(dev);
+	ret = pm_runtime_set_active(dev);
 	if (ret)
 		goto out;
 
-	pm_runtime_set_active(dev);
+	ret = callback(dev);
+	if (ret) {
+		pm_runtime_set_suspended(dev);
+		goto out;
+	}
+
 	pm_runtime_mark_last_busy(dev);
 out:
 	pm_runtime_enable(dev);
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index a7f45853c10337c25a6aea4dca90aa7cca5f99b5..b7445b6ae5a4be8c72507705b82ef0a56b37ca3e 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -18,7 +18,11 @@ config CPU_FREQ
 
 if CPU_FREQ
 
+config CPU_FREQ_GOV_ATTR_SET
+	bool
+
 config CPU_FREQ_GOV_COMMON
+	select CPU_FREQ_GOV_ATTR_SET
 	select IRQ_WORK
 	bool
 
@@ -103,6 +107,17 @@ config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
 	  Be aware that not all cpufreq drivers support the conservative
 	  governor. If unsure have a look at the help section of the
 	  driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
+	bool "schedutil"
+	depends on SMP
+	select CPU_FREQ_GOV_SCHEDUTIL
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the 'schedutil' CPUFreq governor by default. If unsure,
+	  have a look at the help section of that governor. The fallback
+	  governor will be 'performance'.
+
 endchoice
 
 config CPU_FREQ_GOV_PERFORMANCE
@@ -184,6 +199,26 @@ config CPU_FREQ_GOV_CONSERVATIVE
 
 	  If in doubt, say N.
 
+config CPU_FREQ_GOV_SCHEDUTIL
+	tristate "'schedutil' cpufreq policy governor"
+	depends on CPU_FREQ && SMP
+	select CPU_FREQ_GOV_ATTR_SET
+	select IRQ_WORK
+	help
+	  This governor makes decisions based on the utilization data provided
+	  by the scheduler.  It sets the CPU frequency to be proportional to
+	  the utilization/capacity ratio coming from the scheduler.  If the
+	  utilization is frequency-invariant, the new frequency is also
+	  proportional to the maximum available frequency.  If that is not the
+	  case, it is proportional to the current frequency of the CPU.  The
+	  frequency tipping point is at utilization/capacity equal to 80% in
+	  both cases.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called cpufreq_schedutil.
+
+	  If in doubt, say N.
+
 comment "CPU frequency scaling drivers"
 
 config CPUFREQ_DT
@@ -191,6 +226,7 @@ config CPUFREQ_DT
 	depends on HAVE_CLK && OF
 	# if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
 	depends on !CPU_THERMAL || THERMAL
+	select CPUFREQ_DT_PLATDEV
 	select PM_OPP
 	help
 	  This adds a generic DT based cpufreq driver for frequency management.
@@ -199,6 +235,15 @@ config CPUFREQ_DT
 
 	  If in doubt, say N.
 
+config CPUFREQ_DT_PLATDEV
+	bool
+	help
+	  This adds a generic DT based cpufreq platdev driver for frequency
+	  management.  This creates a 'cpufreq-dt' platform device, on the
+	  supported platforms.
+
+	  If in doubt, say N.
+
 if X86
 source "drivers/cpufreq/Kconfig.x86"
 endif
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 14b1f9393b057e106d7b068883ce486ea70239ec..d89b8afe23b6956b6c48e19c87cecc081e7725a1 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -50,15 +50,6 @@ config ARM_HIGHBANK_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_HISI_ACPU_CPUFREQ
-	tristate "Hisilicon ACPU CPUfreq driver"
-	depends on ARCH_HISI && CPUFREQ_DT
-	select PM_OPP
-	help
-	  This enables the hisilicon ACPU CPUfreq driver.
-
-	  If in doubt, say N.
-
 config ARM_IMX6Q_CPUFREQ
 	tristate "Freescale i.MX6 cpufreq support"
 	depends on ARCH_MXC
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index c59bdcb83217071087cc0a90ef62e5cd01ce38d7..adbd1de1cea55cbe6777d3a1c4dab546a6a68adf 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -5,6 +5,7 @@
 config X86_INTEL_PSTATE
        bool "Intel P state control"
        depends on X86
+       select ACPI_PROCESSOR if ACPI
        help
           This driver provides a P state for Intel core processors.
 	  The driver implements an internal governor and will become
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 9e63fb1b09f815fa70e1c4d908707ba39989f8fa..e1eb11ee35708049bc19063de73e977981251c14 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -11,8 +11,10 @@ obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE)	+= cpufreq_userspace.o
 obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND)	+= cpufreq_ondemand.o
 obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
 obj-$(CONFIG_CPU_FREQ_GOV_COMMON)		+= cpufreq_governor.o
+obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET)	+= cpufreq_governor_attr_set.o
 
 obj-$(CONFIG_CPUFREQ_DT)		+= cpufreq-dt.o
+obj-$(CONFIG_CPUFREQ_DT_PLATDEV)	+= cpufreq-dt-platdev.o
 
 ##################################################################################
 # x86 drivers.
@@ -53,7 +55,6 @@ obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
-obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ)	+= hisi-acpu-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
@@ -78,6 +79,7 @@ obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
 obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
 obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
+obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 
 
 ##################################################################################
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index fb5712141040abd750829f6a212c98044ddda52f..32a15052f363f886f0dbd2acc58a8bd48cc5286f 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -25,6 +25,8 @@
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -50,8 +52,6 @@ MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
 MODULE_DESCRIPTION("ACPI Processor P-States Driver");
 MODULE_LICENSE("GPL");
 
-#define PFX "acpi-cpufreq: "
-
 enum {
 	UNDEFINED_CAPABLE = 0,
 	SYSTEM_INTEL_MSR_CAPABLE,
@@ -65,7 +65,6 @@ enum {
 #define MSR_K7_HWCR_CPB_DIS	(1ULL << 25)
 
 struct acpi_cpufreq_data {
-	struct cpufreq_frequency_table *freq_table;
 	unsigned int resume;
 	unsigned int cpu_feature;
 	unsigned int acpi_perf_cpu;
@@ -200,8 +199,9 @@ static int check_amd_hwpstate_cpu(unsigned int cpuid)
 	return cpu_has(cpu, X86_FEATURE_HW_PSTATE);
 }
 
-static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
+static unsigned extract_io(struct cpufreq_policy *policy, u32 value)
 {
+	struct acpi_cpufreq_data *data = policy->driver_data;
 	struct acpi_processor_performance *perf;
 	int i;
 
@@ -209,13 +209,14 @@ static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
 
 	for (i = 0; i < perf->state_count; i++) {
 		if (value == perf->states[i].status)
-			return data->freq_table[i].frequency;
+			return policy->freq_table[i].frequency;
 	}
 	return 0;
 }
 
-static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
+static unsigned extract_msr(struct cpufreq_policy *policy, u32 msr)
 {
+	struct acpi_cpufreq_data *data = policy->driver_data;
 	struct cpufreq_frequency_table *pos;
 	struct acpi_processor_performance *perf;
 
@@ -226,20 +227,22 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
 
 	perf = to_perf_data(data);
 
-	cpufreq_for_each_entry(pos, data->freq_table)
+	cpufreq_for_each_entry(pos, policy->freq_table)
 		if (msr == perf->states[pos->driver_data].status)
 			return pos->frequency;
-	return data->freq_table[0].frequency;
+	return policy->freq_table[0].frequency;
 }
 
-static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
+static unsigned extract_freq(struct cpufreq_policy *policy, u32 val)
 {
+	struct acpi_cpufreq_data *data = policy->driver_data;
+
 	switch (data->cpu_feature) {
 	case SYSTEM_INTEL_MSR_CAPABLE:
 	case SYSTEM_AMD_MSR_CAPABLE:
-		return extract_msr(val, data);
+		return extract_msr(policy, val);
 	case SYSTEM_IO_CAPABLE:
-		return extract_io(val, data);
+		return extract_io(policy, val);
 	default:
 		return 0;
 	}
@@ -374,11 +377,11 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 		return 0;
 
 	data = policy->driver_data;
-	if (unlikely(!data || !data->freq_table))
+	if (unlikely(!data || !policy->freq_table))
 		return 0;
 
-	cached_freq = data->freq_table[to_perf_data(data)->state].frequency;
-	freq = extract_freq(get_cur_val(cpumask_of(cpu), data), data);
+	cached_freq = policy->freq_table[to_perf_data(data)->state].frequency;
+	freq = extract_freq(policy, get_cur_val(cpumask_of(cpu), data));
 	if (freq != cached_freq) {
 		/*
 		 * The dreaded BIOS frequency change behind our back.
@@ -392,14 +395,15 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 	return freq;
 }
 
-static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
-				struct acpi_cpufreq_data *data)
+static unsigned int check_freqs(struct cpufreq_policy *policy,
+				const struct cpumask *mask, unsigned int freq)
 {
+	struct acpi_cpufreq_data *data = policy->driver_data;
 	unsigned int cur_freq;
 	unsigned int i;
 
 	for (i = 0; i < 100; i++) {
-		cur_freq = extract_freq(get_cur_val(mask, data), data);
+		cur_freq = extract_freq(policy, get_cur_val(mask, data));
 		if (cur_freq == freq)
 			return 1;
 		udelay(10);
@@ -416,12 +420,12 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	unsigned int next_perf_state = 0; /* Index into perf table */
 	int result = 0;
 
-	if (unlikely(data == NULL || data->freq_table == NULL)) {
+	if (unlikely(!data)) {
 		return -ENODEV;
 	}
 
 	perf = to_perf_data(data);
-	next_perf_state = data->freq_table[index].driver_data;
+	next_perf_state = policy->freq_table[index].driver_data;
 	if (perf->state == next_perf_state) {
 		if (unlikely(data->resume)) {
 			pr_debug("Called after resume, resetting to P%d\n",
@@ -444,8 +448,8 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	drv_write(data, mask, perf->states[next_perf_state].control);
 
 	if (acpi_pstate_strict) {
-		if (!check_freqs(mask, data->freq_table[index].frequency,
-					data)) {
+		if (!check_freqs(policy, mask,
+				 policy->freq_table[index].frequency)) {
 			pr_debug("acpi_cpufreq_target failed (%d)\n",
 				policy->cpu);
 			result = -EAGAIN;
@@ -458,6 +462,43 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	return result;
 }
 
+unsigned int acpi_cpufreq_fast_switch(struct cpufreq_policy *policy,
+				      unsigned int target_freq)
+{
+	struct acpi_cpufreq_data *data = policy->driver_data;
+	struct acpi_processor_performance *perf;
+	struct cpufreq_frequency_table *entry;
+	unsigned int next_perf_state, next_freq, freq;
+
+	/*
+	 * Find the closest frequency above target_freq.
+	 *
+	 * The table is sorted in the reverse order with respect to the
+	 * frequency and all of the entries are valid (see the initialization).
+	 */
+	entry = policy->freq_table;
+	do {
+		entry++;
+		freq = entry->frequency;
+	} while (freq >= target_freq && freq != CPUFREQ_TABLE_END);
+	entry--;
+	next_freq = entry->frequency;
+	next_perf_state = entry->driver_data;
+
+	perf = to_perf_data(data);
+	if (perf->state == next_perf_state) {
+		if (unlikely(data->resume))
+			data->resume = 0;
+		else
+			return next_freq;
+	}
+
+	data->cpu_freq_write(&perf->control_register,
+			     perf->states[next_perf_state].control);
+	perf->state = next_perf_state;
+	return next_freq;
+}
+
 static unsigned long
 acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
 {
@@ -611,10 +652,7 @@ static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
 		if ((c->x86 == 15) &&
 		    (c->x86_model == 6) &&
 		    (c->x86_mask == 8)) {
-			printk(KERN_INFO "acpi-cpufreq: Intel(R) "
-			    "Xeon(R) 7100 Errata AL30, processors may "
-			    "lock up on frequency changes: disabling "
-			    "acpi-cpufreq.\n");
+			pr_info("Intel(R) Xeon(R) 7100 Errata AL30, processors may lock up on frequency changes: disabling acpi-cpufreq\n");
 			return -ENODEV;
 		    }
 		}
@@ -631,6 +669,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	unsigned int result = 0;
 	struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
 	struct acpi_processor_performance *perf;
+	struct cpufreq_frequency_table *freq_table;
 #ifdef CONFIG_SMP
 	static int blacklisted;
 #endif
@@ -690,7 +729,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		cpumask_copy(data->freqdomain_cpus,
 			     topology_sibling_cpumask(cpu));
 		policy->shared_type = CPUFREQ_SHARED_TYPE_HW;
-		pr_info_once(PFX "overriding BIOS provided _PSD data\n");
+		pr_info_once("overriding BIOS provided _PSD data\n");
 	}
 #endif
 
@@ -742,9 +781,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		goto err_unreg;
 	}
 
-	data->freq_table = kzalloc(sizeof(*data->freq_table) *
+	freq_table = kzalloc(sizeof(*freq_table) *
 		    (perf->state_count+1), GFP_KERNEL);
-	if (!data->freq_table) {
+	if (!freq_table) {
 		result = -ENOMEM;
 		goto err_unreg;
 	}
@@ -762,30 +801,29 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
 	    policy->cpuinfo.transition_latency > 20 * 1000) {
 		policy->cpuinfo.transition_latency = 20 * 1000;
-		printk_once(KERN_INFO
-			    "P-state transition latency capped at 20 uS\n");
+		pr_info_once("P-state transition latency capped at 20 uS\n");
 	}
 
 	/* table init */
 	for (i = 0; i < perf->state_count; i++) {
 		if (i > 0 && perf->states[i].core_frequency >=
-		    data->freq_table[valid_states-1].frequency / 1000)
+		    freq_table[valid_states-1].frequency / 1000)
 			continue;
 
-		data->freq_table[valid_states].driver_data = i;
-		data->freq_table[valid_states].frequency =
+		freq_table[valid_states].driver_data = i;
+		freq_table[valid_states].frequency =
 		    perf->states[i].core_frequency * 1000;
 		valid_states++;
 	}
-	data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
+	freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
 	perf->state = 0;
 
-	result = cpufreq_table_validate_and_show(policy, data->freq_table);
+	result = cpufreq_table_validate_and_show(policy, freq_table);
 	if (result)
 		goto err_freqfree;
 
 	if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
-		printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
+		pr_warn(FW_WARN "P-state 0 is not max freq\n");
 
 	switch (perf->control_register.space_id) {
 	case ACPI_ADR_SPACE_SYSTEM_IO:
@@ -821,10 +859,13 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	 */
 	data->resume = 1;
 
+	policy->fast_switch_possible = !acpi_pstate_strict &&
+		!(policy_is_shared(policy) && policy->shared_type != CPUFREQ_SHARED_TYPE_ANY);
+
 	return result;
 
 err_freqfree:
-	kfree(data->freq_table);
+	kfree(freq_table);
 err_unreg:
 	acpi_processor_unregister_performance(cpu);
 err_free_mask:
@@ -842,13 +883,12 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 
 	pr_debug("acpi_cpufreq_cpu_exit\n");
 
-	if (data) {
-		policy->driver_data = NULL;
-		acpi_processor_unregister_performance(data->acpi_perf_cpu);
-		free_cpumask_var(data->freqdomain_cpus);
-		kfree(data->freq_table);
-		kfree(data);
-	}
+	policy->fast_switch_possible = false;
+	policy->driver_data = NULL;
+	acpi_processor_unregister_performance(data->acpi_perf_cpu);
+	free_cpumask_var(data->freqdomain_cpus);
+	kfree(policy->freq_table);
+	kfree(data);
 
 	return 0;
 }
@@ -876,6 +916,7 @@ static struct freq_attr *acpi_cpufreq_attr[] = {
 static struct cpufreq_driver acpi_cpufreq_driver = {
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= acpi_cpufreq_target,
+	.fast_switch	= acpi_cpufreq_fast_switch,
 	.bios_limit	= acpi_processor_get_bios_limit,
 	.init		= acpi_cpufreq_cpu_init,
 	.exit		= acpi_cpufreq_cpu_exit,
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index c251247ae6613e860164627d8c8161f2b0d0cfe5..418042201e6da9e501ac6fb161437b117491b3ff 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -298,7 +298,8 @@ static int merge_cluster_tables(void)
 	return 0;
 }
 
-static void _put_cluster_clk_and_freq_table(struct device *cpu_dev)
+static void _put_cluster_clk_and_freq_table(struct device *cpu_dev,
+					    const struct cpumask *cpumask)
 {
 	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
 
@@ -308,11 +309,12 @@ static void _put_cluster_clk_and_freq_table(struct device *cpu_dev)
 	clk_put(clk[cluster]);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
 	if (arm_bL_ops->free_opp_table)
-		arm_bL_ops->free_opp_table(cpu_dev);
+		arm_bL_ops->free_opp_table(cpumask);
 	dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
 }
 
-static void put_cluster_clk_and_freq_table(struct device *cpu_dev)
+static void put_cluster_clk_and_freq_table(struct device *cpu_dev,
+					   const struct cpumask *cpumask)
 {
 	u32 cluster = cpu_to_cluster(cpu_dev->id);
 	int i;
@@ -321,7 +323,7 @@ static void put_cluster_clk_and_freq_table(struct device *cpu_dev)
 		return;
 
 	if (cluster < MAX_CLUSTERS)
-		return _put_cluster_clk_and_freq_table(cpu_dev);
+		return _put_cluster_clk_and_freq_table(cpu_dev, cpumask);
 
 	for_each_present_cpu(i) {
 		struct device *cdev = get_cpu_device(i);
@@ -330,14 +332,15 @@ static void put_cluster_clk_and_freq_table(struct device *cpu_dev)
 			return;
 		}
 
-		_put_cluster_clk_and_freq_table(cdev);
+		_put_cluster_clk_and_freq_table(cdev, cpumask);
 	}
 
 	/* free virtual table */
 	kfree(freq_table[cluster]);
 }
 
-static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
+static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
+					   const struct cpumask *cpumask)
 {
 	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
 	int ret;
@@ -345,7 +348,7 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
 	if (freq_table[cluster])
 		return 0;
 
-	ret = arm_bL_ops->init_opp_table(cpu_dev);
+	ret = arm_bL_ops->init_opp_table(cpumask);
 	if (ret) {
 		dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n",
 				__func__, cpu_dev->id, ret);
@@ -374,14 +377,15 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
 
 free_opp_table:
 	if (arm_bL_ops->free_opp_table)
-		arm_bL_ops->free_opp_table(cpu_dev);
+		arm_bL_ops->free_opp_table(cpumask);
 out:
 	dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
 			cluster);
 	return ret;
 }
 
-static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
+static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
+					  const struct cpumask *cpumask)
 {
 	u32 cluster = cpu_to_cluster(cpu_dev->id);
 	int i, ret;
@@ -390,7 +394,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
 		return 0;
 
 	if (cluster < MAX_CLUSTERS) {
-		ret = _get_cluster_clk_and_freq_table(cpu_dev);
+		ret = _get_cluster_clk_and_freq_table(cpu_dev, cpumask);
 		if (ret)
 			atomic_dec(&cluster_usage[cluster]);
 		return ret;
@@ -407,7 +411,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
 			return -ENODEV;
 		}
 
-		ret = _get_cluster_clk_and_freq_table(cdev);
+		ret = _get_cluster_clk_and_freq_table(cdev, cpumask);
 		if (ret)
 			goto put_clusters;
 	}
@@ -433,7 +437,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
 			return -ENODEV;
 		}
 
-		_put_cluster_clk_and_freq_table(cdev);
+		_put_cluster_clk_and_freq_table(cdev, cpumask);
 	}
 
 	atomic_dec(&cluster_usage[cluster]);
@@ -455,18 +459,6 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
 		return -ENODEV;
 	}
 
-	ret = get_cluster_clk_and_freq_table(cpu_dev);
-	if (ret)
-		return ret;
-
-	ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]);
-	if (ret) {
-		dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n",
-				policy->cpu, cur_cluster);
-		put_cluster_clk_and_freq_table(cpu_dev);
-		return ret;
-	}
-
 	if (cur_cluster < MAX_CLUSTERS) {
 		int cpu;
 
@@ -479,6 +471,18 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
 		per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER;
 	}
 
+	ret = get_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
+	if (ret)
+		return ret;
+
+	ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]);
+	if (ret) {
+		dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n",
+			policy->cpu, cur_cluster);
+		put_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
+		return ret;
+	}
+
 	if (arm_bL_ops->get_transition_latency)
 		policy->cpuinfo.transition_latency =
 			arm_bL_ops->get_transition_latency(cpu_dev);
@@ -509,7 +513,7 @@ static int bL_cpufreq_exit(struct cpufreq_policy *policy)
 		return -ENODEV;
 	}
 
-	put_cluster_clk_and_freq_table(cpu_dev);
+	put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus);
 	dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu);
 
 	return 0;
diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h
index b88889d9387ed5d5d3183c6d19b7fc2c8208d230..184d7c3a112a8ca45e652f4c519ef506144db5fc 100644
--- a/drivers/cpufreq/arm_big_little.h
+++ b/drivers/cpufreq/arm_big_little.h
@@ -30,11 +30,11 @@ struct cpufreq_arm_bL_ops {
 	 * This must set opp table for cpu_dev in a similar way as done by
 	 * dev_pm_opp_of_add_table().
 	 */
-	int (*init_opp_table)(struct device *cpu_dev);
+	int (*init_opp_table)(const struct cpumask *cpumask);
 
 	/* Optional */
 	int (*get_transition_latency)(struct device *cpu_dev);
-	void (*free_opp_table)(struct device *cpu_dev);
+	void (*free_opp_table)(const struct cpumask *cpumask);
 };
 
 int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops);
diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c
index 16ddeefe94433a4edb369636131a4bd69912ccf7..39b3f51d9a30a971eebccc1e98c5d679ecafa500 100644
--- a/drivers/cpufreq/arm_big_little_dt.c
+++ b/drivers/cpufreq/arm_big_little_dt.c
@@ -43,23 +43,6 @@ static struct device_node *get_cpu_node_with_valid_op(int cpu)
 	return np;
 }
 
-static int dt_init_opp_table(struct device *cpu_dev)
-{
-	struct device_node *np;
-	int ret;
-
-	np = of_node_get(cpu_dev->of_node);
-	if (!np) {
-		pr_err("failed to find cpu%d node\n", cpu_dev->id);
-		return -ENOENT;
-	}
-
-	ret = dev_pm_opp_of_add_table(cpu_dev);
-	of_node_put(np);
-
-	return ret;
-}
-
 static int dt_get_transition_latency(struct device *cpu_dev)
 {
 	struct device_node *np;
@@ -81,8 +64,8 @@ static int dt_get_transition_latency(struct device *cpu_dev)
 static struct cpufreq_arm_bL_ops dt_bL_ops = {
 	.name	= "dt-bl",
 	.get_transition_latency = dt_get_transition_latency,
-	.init_opp_table = dt_init_opp_table,
-	.free_opp_table = dev_pm_opp_of_remove_table,
+	.init_opp_table = dev_pm_opp_of_cpumask_add_table,
+	.free_opp_table = dev_pm_opp_of_cpumask_remove_table,
 };
 
 static int generic_bL_probe(struct platform_device *pdev)
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index 7c0bdfb1a2ca47ea9dcd0b36ef892274edd929b4..8882b8e2ecd0d0fe82ddd8cbb1bf8c4e29f4b886 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -173,4 +173,25 @@ static int __init cppc_cpufreq_init(void)
 	return -ENODEV;
 }
 
+static void __exit cppc_cpufreq_exit(void)
+{
+	struct cpudata *cpu;
+	int i;
+
+	cpufreq_unregister_driver(&cppc_cpufreq_driver);
+
+	for_each_possible_cpu(i) {
+		cpu = all_cpu_data[i];
+		free_cpumask_var(cpu->shared_cpu_map);
+		kfree(cpu);
+	}
+
+	kfree(all_cpu_data);
+}
+
+module_exit(cppc_cpufreq_exit);
+MODULE_AUTHOR("Ashwin Chaugule");
+MODULE_DESCRIPTION("CPUFreq driver based on the ACPI CPPC v5.0+ spec");
+MODULE_LICENSE("GPL");
+
 late_initcall(cppc_cpufreq_init);
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
new file mode 100644
index 0000000000000000000000000000000000000000..3646b143bbf5342f0ac8e0a1b90a86efc7c8cef5
--- /dev/null
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2016 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static const struct of_device_id machines[] __initconst = {
+	{ .compatible = "allwinner,sun4i-a10", },
+	{ .compatible = "allwinner,sun5i-a10s", },
+	{ .compatible = "allwinner,sun5i-a13", },
+	{ .compatible = "allwinner,sun5i-r8", },
+	{ .compatible = "allwinner,sun6i-a31", },
+	{ .compatible = "allwinner,sun6i-a31s", },
+	{ .compatible = "allwinner,sun7i-a20", },
+	{ .compatible = "allwinner,sun8i-a23", },
+	{ .compatible = "allwinner,sun8i-a33", },
+	{ .compatible = "allwinner,sun8i-a83t", },
+	{ .compatible = "allwinner,sun8i-h3", },
+
+	{ .compatible = "hisilicon,hi6220", },
+
+	{ .compatible = "fsl,imx27", },
+	{ .compatible = "fsl,imx51", },
+	{ .compatible = "fsl,imx53", },
+	{ .compatible = "fsl,imx7d", },
+
+	{ .compatible = "marvell,berlin", },
+
+	{ .compatible = "samsung,exynos3250", },
+	{ .compatible = "samsung,exynos4210", },
+	{ .compatible = "samsung,exynos4212", },
+	{ .compatible = "samsung,exynos4412", },
+	{ .compatible = "samsung,exynos5250", },
+#ifndef CONFIG_BL_SWITCHER
+	{ .compatible = "samsung,exynos5420", },
+	{ .compatible = "samsung,exynos5800", },
+#endif
+
+	{ .compatible = "renesas,emev2", },
+	{ .compatible = "renesas,r7s72100", },
+	{ .compatible = "renesas,r8a73a4", },
+	{ .compatible = "renesas,r8a7740", },
+	{ .compatible = "renesas,r8a7778", },
+	{ .compatible = "renesas,r8a7779", },
+	{ .compatible = "renesas,r8a7790", },
+	{ .compatible = "renesas,r8a7791", },
+	{ .compatible = "renesas,r8a7793", },
+	{ .compatible = "renesas,r8a7794", },
+	{ .compatible = "renesas,sh73a0", },
+
+	{ .compatible = "rockchip,rk2928", },
+	{ .compatible = "rockchip,rk3036", },
+	{ .compatible = "rockchip,rk3066a", },
+	{ .compatible = "rockchip,rk3066b", },
+	{ .compatible = "rockchip,rk3188", },
+	{ .compatible = "rockchip,rk3228", },
+	{ .compatible = "rockchip,rk3288", },
+	{ .compatible = "rockchip,rk3366", },
+	{ .compatible = "rockchip,rk3368", },
+	{ .compatible = "rockchip,rk3399", },
+
+	{ .compatible = "sigma,tango4" },
+
+	{ .compatible = "ti,omap2", },
+	{ .compatible = "ti,omap3", },
+	{ .compatible = "ti,omap4", },
+	{ .compatible = "ti,omap5", },
+
+	{ .compatible = "xlnx,zynq-7000", },
+};
+
+static int __init cpufreq_dt_platdev_init(void)
+{
+	struct device_node *np = of_find_node_by_path("/");
+
+	if (!np)
+		return -ENODEV;
+
+	if (!of_match_node(machines, np))
+		return -ENODEV;
+
+	of_node_put(of_root);
+
+	return PTR_ERR_OR_ZERO(platform_device_register_simple("cpufreq-dt", -1,
+							       NULL, 0));
+}
+device_initcall(cpufreq_dt_platdev_init);
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 5f8dbe640a202baa2b12d26267ca78b983c8b7fc..3957de801ae8260770051bc07a0fc391ea45c9c1 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -15,7 +15,6 @@
 #include <linux/cpu.h>
 #include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
-#include <linux/cpufreq-dt.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
 #include <linux/module.h>
@@ -147,7 +146,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct clk *cpu_clk;
 	struct dev_pm_opp *suspend_opp;
 	unsigned int transition_latency;
-	bool opp_v1 = false;
+	bool fallback = false;
 	const char *name;
 	int ret;
 
@@ -167,14 +166,16 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	/* Get OPP-sharing information from "operating-points-v2" bindings */
 	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
+		if (ret != -ENOENT)
+			goto out_put_clk;
+
 		/*
 		 * operating-points-v2 not supported, fallback to old method of
-		 * finding shared-OPPs for backward compatibility.
+		 * finding shared-OPPs for backward compatibility if the
+		 * platform hasn't set sharing CPUs.
 		 */
-		if (ret == -ENOENT)
-			opp_v1 = true;
-		else
-			goto out_put_clk;
+		if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus))
+			fallback = true;
 	}
 
 	/*
@@ -214,11 +215,8 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		goto out_free_opp;
 	}
 
-	if (opp_v1) {
-		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
-
-		if (!pd || !pd->independent_clocks)
-			cpumask_setall(policy->cpus);
+	if (fallback) {
+		cpumask_setall(policy->cpus);
 
 		/*
 		 * OPP tables are initialized only for policy->cpu, do it for
diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c
index db69eeb501a7d49514d7ddd255c65d2e96e4bbeb..5503d491b0160f39be799469aef3fd0d5bc60e72 100644
--- a/drivers/cpufreq/cpufreq-nforce2.c
+++ b/drivers/cpufreq/cpufreq-nforce2.c
@@ -7,6 +7,8 @@
  *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -56,8 +58,6 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
 MODULE_PARM_DESC(min_fsb,
 		"Minimum FSB to use, if not defined: current FSB - 50");
 
-#define PFX "cpufreq-nforce2: "
-
 /**
  * nforce2_calc_fsb - calculate FSB
  * @pll: PLL value
@@ -174,13 +174,13 @@ static int nforce2_set_fsb(unsigned int fsb)
 	int pll = 0;
 
 	if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
-		printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb);
+		pr_err("FSB %d is out of range!\n", fsb);
 		return -EINVAL;
 	}
 
 	tfsb = nforce2_fsb_read(0);
 	if (!tfsb) {
-		printk(KERN_ERR PFX "Error while reading the FSB\n");
+		pr_err("Error while reading the FSB\n");
 		return -EINVAL;
 	}
 
@@ -276,8 +276,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
 	/* local_irq_save(flags); */
 
 	if (nforce2_set_fsb(target_fsb) < 0)
-		printk(KERN_ERR PFX "Changing FSB to %d failed\n",
-			target_fsb);
+		pr_err("Changing FSB to %d failed\n", target_fsb);
 	else
 		pr_debug("Changed FSB successfully to %d\n",
 			target_fsb);
@@ -325,8 +324,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 	/* FIX: Get FID from CPU */
 	if (!fid) {
 		if (!cpu_khz) {
-			printk(KERN_WARNING PFX
-			"cpu_khz not set, can't calculate multiplier!\n");
+			pr_warn("cpu_khz not set, can't calculate multiplier!\n");
 			return -ENODEV;
 		}
 
@@ -341,8 +339,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 		}
 	}
 
-	printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb,
-	       fid / 10, fid % 10);
+	pr_info("FSB currently at %i MHz, FID %d.%d\n",
+		fsb, fid / 10, fid % 10);
 
 	/* Set maximum FSB to FSB at boot time */
 	max_fsb = nforce2_fsb_read(1);
@@ -401,11 +399,9 @@ static int nforce2_detect_chipset(void)
 	if (nforce2_dev == NULL)
 		return -ENODEV;
 
-	printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n",
-	       nforce2_dev->revision);
-	printk(KERN_INFO PFX
-	       "FSB changing is maybe unstable and can lead to "
-	       "crashes and data loss.\n");
+	pr_info("Detected nForce2 chipset revision %X\n",
+		nforce2_dev->revision);
+	pr_info("FSB changing is maybe unstable and can lead to crashes and data loss\n");
 
 	return 0;
 }
@@ -423,7 +419,7 @@ static int __init nforce2_init(void)
 
 	/* detect chipset */
 	if (nforce2_detect_chipset()) {
-		printk(KERN_INFO PFX "No nForce2 chipset.\n");
+		pr_info("No nForce2 chipset\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index c4acfc5273b3c1f8c5efc321f5ea8407a4b7f02b..035513b012eebf049cffbe713680c556993f944f 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -78,6 +78,11 @@ static int cpufreq_governor(struct cpufreq_policy *policy, unsigned int event);
 static unsigned int __cpufreq_get(struct cpufreq_policy *policy);
 static int cpufreq_start_governor(struct cpufreq_policy *policy);
 
+static inline int cpufreq_exit_governor(struct cpufreq_policy *policy)
+{
+	return cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+}
+
 /**
  * Two notifier lists: the "policy" list is involved in the
  * validation process for a new CPU frequency policy; the
@@ -429,6 +434,73 @@ void cpufreq_freq_transition_end(struct cpufreq_policy *policy,
 }
 EXPORT_SYMBOL_GPL(cpufreq_freq_transition_end);
 
+/*
+ * Fast frequency switching status count.  Positive means "enabled", negative
+ * means "disabled" and 0 means "not decided yet".
+ */
+static int cpufreq_fast_switch_count;
+static DEFINE_MUTEX(cpufreq_fast_switch_lock);
+
+static void cpufreq_list_transition_notifiers(void)
+{
+	struct notifier_block *nb;
+
+	pr_info("Registered transition notifiers:\n");
+
+	mutex_lock(&cpufreq_transition_notifier_list.mutex);
+
+	for (nb = cpufreq_transition_notifier_list.head; nb; nb = nb->next)
+		pr_info("%pF\n", nb->notifier_call);
+
+	mutex_unlock(&cpufreq_transition_notifier_list.mutex);
+}
+
+/**
+ * cpufreq_enable_fast_switch - Enable fast frequency switching for policy.
+ * @policy: cpufreq policy to enable fast frequency switching for.
+ *
+ * Try to enable fast frequency switching for @policy.
+ *
+ * The attempt will fail if there is at least one transition notifier registered
+ * at this point, as fast frequency switching is quite fundamentally at odds
+ * with transition notifiers.  Thus if successful, it will make registration of
+ * transition notifiers fail going forward.
+ */
+void cpufreq_enable_fast_switch(struct cpufreq_policy *policy)
+{
+	lockdep_assert_held(&policy->rwsem);
+
+	if (!policy->fast_switch_possible)
+		return;
+
+	mutex_lock(&cpufreq_fast_switch_lock);
+	if (cpufreq_fast_switch_count >= 0) {
+		cpufreq_fast_switch_count++;
+		policy->fast_switch_enabled = true;
+	} else {
+		pr_warn("CPU%u: Fast frequency switching not enabled\n",
+			policy->cpu);
+		cpufreq_list_transition_notifiers();
+	}
+	mutex_unlock(&cpufreq_fast_switch_lock);
+}
+EXPORT_SYMBOL_GPL(cpufreq_enable_fast_switch);
+
+/**
+ * cpufreq_disable_fast_switch - Disable fast frequency switching for policy.
+ * @policy: cpufreq policy to disable fast frequency switching for.
+ */
+void cpufreq_disable_fast_switch(struct cpufreq_policy *policy)
+{
+	mutex_lock(&cpufreq_fast_switch_lock);
+	if (policy->fast_switch_enabled) {
+		policy->fast_switch_enabled = false;
+		if (!WARN_ON(cpufreq_fast_switch_count <= 0))
+			cpufreq_fast_switch_count--;
+	}
+	mutex_unlock(&cpufreq_fast_switch_lock);
+}
+EXPORT_SYMBOL_GPL(cpufreq_disable_fast_switch);
 
 /*********************************************************************
  *                          SYSFS INTERFACE                          *
@@ -1248,26 +1320,24 @@ static int cpufreq_online(unsigned int cpu)
  */
 static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
 {
+	struct cpufreq_policy *policy;
 	unsigned cpu = dev->id;
-	int ret;
 
 	dev_dbg(dev, "%s: adding CPU%u\n", __func__, cpu);
 
-	if (cpu_online(cpu)) {
-		ret = cpufreq_online(cpu);
-	} else {
-		/*
-		 * A hotplug notifier will follow and we will handle it as CPU
-		 * online then.  For now, just create the sysfs link, unless
-		 * there is no policy or the link is already present.
-		 */
-		struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
+	if (cpu_online(cpu))
+		return cpufreq_online(cpu);
 
-		ret = policy && !cpumask_test_and_set_cpu(cpu, policy->real_cpus)
-			? add_cpu_dev_symlink(policy, cpu) : 0;
-	}
+	/*
+	 * A hotplug notifier will follow and we will handle it as CPU online
+	 * then.  For now, just create the sysfs link, unless there is no policy
+	 * or the link is already present.
+	 */
+	policy = per_cpu(cpufreq_cpu_data, cpu);
+	if (!policy || cpumask_test_and_set_cpu(cpu, policy->real_cpus))
+		return 0;
 
-	return ret;
+	return add_cpu_dev_symlink(policy, cpu);
 }
 
 static void cpufreq_offline(unsigned int cpu)
@@ -1319,7 +1389,7 @@ static void cpufreq_offline(unsigned int cpu)
 
 	/* If cpu is last user of policy, free policy */
 	if (has_target()) {
-		ret = cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+		ret = cpufreq_exit_governor(policy);
 		if (ret)
 			pr_err("%s: Failed to exit governor\n", __func__);
 	}
@@ -1447,8 +1517,12 @@ static unsigned int __cpufreq_get(struct cpufreq_policy *policy)
 
 	ret_freq = cpufreq_driver->get(policy->cpu);
 
-	/* Updating inactive policies is invalid, so avoid doing that. */
-	if (unlikely(policy_is_inactive(policy)))
+	/*
+	 * Updating inactive policies is invalid, so avoid doing that.  Also
+	 * if fast frequency switching is used with the given policy, the check
+	 * against policy->cur is pointless, so skip it in that case too.
+	 */
+	if (unlikely(policy_is_inactive(policy)) || policy->fast_switch_enabled)
 		return ret_freq;
 
 	if (ret_freq && policy->cur &&
@@ -1679,8 +1753,18 @@ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list)
 
 	switch (list) {
 	case CPUFREQ_TRANSITION_NOTIFIER:
+		mutex_lock(&cpufreq_fast_switch_lock);
+
+		if (cpufreq_fast_switch_count > 0) {
+			mutex_unlock(&cpufreq_fast_switch_lock);
+			return -EBUSY;
+		}
 		ret = srcu_notifier_chain_register(
 				&cpufreq_transition_notifier_list, nb);
+		if (!ret)
+			cpufreq_fast_switch_count--;
+
+		mutex_unlock(&cpufreq_fast_switch_lock);
 		break;
 	case CPUFREQ_POLICY_NOTIFIER:
 		ret = blocking_notifier_chain_register(
@@ -1713,8 +1797,14 @@ int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list)
 
 	switch (list) {
 	case CPUFREQ_TRANSITION_NOTIFIER:
+		mutex_lock(&cpufreq_fast_switch_lock);
+
 		ret = srcu_notifier_chain_unregister(
 				&cpufreq_transition_notifier_list, nb);
+		if (!ret && !WARN_ON(cpufreq_fast_switch_count >= 0))
+			cpufreq_fast_switch_count++;
+
+		mutex_unlock(&cpufreq_fast_switch_lock);
 		break;
 	case CPUFREQ_POLICY_NOTIFIER:
 		ret = blocking_notifier_chain_unregister(
@@ -1733,6 +1823,37 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier);
  *                              GOVERNORS                            *
  *********************************************************************/
 
+/**
+ * cpufreq_driver_fast_switch - Carry out a fast CPU frequency switch.
+ * @policy: cpufreq policy to switch the frequency for.
+ * @target_freq: New frequency to set (may be approximate).
+ *
+ * Carry out a fast frequency switch without sleeping.
+ *
+ * The driver's ->fast_switch() callback invoked by this function must be
+ * suitable for being called from within RCU-sched read-side critical sections
+ * and it is expected to select the minimum available frequency greater than or
+ * equal to @target_freq (CPUFREQ_RELATION_L).
+ *
+ * This function must not be called if policy->fast_switch_enabled is unset.
+ *
+ * Governors calling this function must guarantee that it will never be invoked
+ * twice in parallel for the same policy and that it will never be called in
+ * parallel with either ->target() or ->target_index() for the same policy.
+ *
+ * If CPUFREQ_ENTRY_INVALID is returned by the driver's ->fast_switch()
+ * callback to indicate an error condition, the hardware configuration must be
+ * preserved.
+ */
+unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy,
+					unsigned int target_freq)
+{
+	clamp_val(target_freq, policy->min, policy->max);
+
+	return cpufreq_driver->fast_switch(policy, target_freq);
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_fast_switch);
+
 /* Must set freqs->new to intermediate frequency */
 static int __target_intermediate(struct cpufreq_policy *policy,
 				 struct cpufreq_freqs *freqs, int index)
@@ -2108,7 +2229,7 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
 			return ret;
 		}
 
-		ret = cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+		ret = cpufreq_exit_governor(policy);
 		if (ret) {
 			pr_err("%s: Failed to Exit Governor: %s (%d)\n",
 			       __func__, old_gov->name, ret);
@@ -2125,7 +2246,7 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
 			pr_debug("cpufreq: governor change\n");
 			return 0;
 		}
-		cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+		cpufreq_exit_governor(policy);
 	}
 
 	/* new governor failed, so re-start old one */
@@ -2193,16 +2314,13 @@ static int cpufreq_cpu_callback(struct notifier_block *nfb,
 
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
+	case CPU_DOWN_FAILED:
 		cpufreq_online(cpu);
 		break;
 
 	case CPU_DOWN_PREPARE:
 		cpufreq_offline(cpu);
 		break;
-
-	case CPU_DOWN_FAILED:
-		cpufreq_online(cpu);
-		break;
 	}
 	return NOTIFY_OK;
 }
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index bf4913f6453b1b26f0b71485ba59896bd4f62fe0..316df247e00da306a8e4c3bb4c90aa1507a85147 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -129,9 +129,10 @@ static struct notifier_block cs_cpufreq_notifier_block = {
 /************************** sysfs interface ************************/
 static struct dbs_governor cs_dbs_gov;
 
-static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
-		const char *buf, size_t count)
+static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set,
+					  const char *buf, size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	unsigned int input;
 	int ret;
 	ret = sscanf(buf, "%u", &input);
@@ -143,9 +144,10 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
 	return count;
 }
 
-static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_up_threshold(struct gov_attr_set *attr_set,
+				  const char *buf, size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
 	unsigned int input;
 	int ret;
@@ -158,9 +160,10 @@ static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
 	return count;
 }
 
-static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_down_threshold(struct gov_attr_set *attr_set,
+				    const char *buf, size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
 	unsigned int input;
 	int ret;
@@ -175,9 +178,10 @@ static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf,
 	return count;
 }
 
-static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
-		const char *buf, size_t count)
+static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set,
+				      const char *buf, size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	unsigned int input;
 	int ret;
 
@@ -199,9 +203,10 @@ static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
 	return count;
 }
 
-static ssize_t store_freq_step(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_freq_step(struct gov_attr_set *attr_set, const char *buf,
+			       size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
 	unsigned int input;
 	int ret;
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index 5f1147fa9239cdc325eb8fae871d151a4b36337f..be498d56dd6971d10d4e46b23c814c6f10a5de72 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -43,9 +43,10 @@ static DEFINE_MUTEX(gov_dbs_data_mutex);
  * This must be called with dbs_data->mutex held, otherwise traversing
  * policy_dbs_list isn't safe.
  */
-ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf,
+ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
 			    size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	struct policy_dbs_info *policy_dbs;
 	unsigned int rate;
 	int ret;
@@ -59,7 +60,7 @@ ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf,
 	 * We are operating under dbs_data->mutex and so the list and its
 	 * entries can't be freed concurrently.
 	 */
-	list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) {
+	list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
 		mutex_lock(&policy_dbs->timer_mutex);
 		/*
 		 * On 32-bit architectures this may race with the
@@ -96,13 +97,13 @@ void gov_update_cpu_data(struct dbs_data *dbs_data)
 {
 	struct policy_dbs_info *policy_dbs;
 
-	list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) {
+	list_for_each_entry(policy_dbs, &dbs_data->attr_set.policy_list, list) {
 		unsigned int j;
 
 		for_each_cpu(j, policy_dbs->policy->cpus) {
 			struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
 
-			j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_cpu_wall,
+			j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time,
 								  dbs_data->io_is_busy);
 			if (dbs_data->ignore_nice_load)
 				j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
@@ -111,54 +112,6 @@ void gov_update_cpu_data(struct dbs_data *dbs_data)
 }
 EXPORT_SYMBOL_GPL(gov_update_cpu_data);
 
-static inline struct dbs_data *to_dbs_data(struct kobject *kobj)
-{
-	return container_of(kobj, struct dbs_data, kobj);
-}
-
-static inline struct governor_attr *to_gov_attr(struct attribute *attr)
-{
-	return container_of(attr, struct governor_attr, attr);
-}
-
-static ssize_t governor_show(struct kobject *kobj, struct attribute *attr,
-			     char *buf)
-{
-	struct dbs_data *dbs_data = to_dbs_data(kobj);
-	struct governor_attr *gattr = to_gov_attr(attr);
-
-	return gattr->show(dbs_data, buf);
-}
-
-static ssize_t governor_store(struct kobject *kobj, struct attribute *attr,
-			      const char *buf, size_t count)
-{
-	struct dbs_data *dbs_data = to_dbs_data(kobj);
-	struct governor_attr *gattr = to_gov_attr(attr);
-	int ret = -EBUSY;
-
-	mutex_lock(&dbs_data->mutex);
-
-	if (dbs_data->usage_count)
-		ret = gattr->store(dbs_data, buf, count);
-
-	mutex_unlock(&dbs_data->mutex);
-
-	return ret;
-}
-
-/*
- * Sysfs Ops for accessing governor attributes.
- *
- * All show/store invocations for governor specific sysfs attributes, will first
- * call the below show/store callbacks and the attribute specific callback will
- * be called from within it.
- */
-static const struct sysfs_ops governor_sysfs_ops = {
-	.show	= governor_show,
-	.store	= governor_store,
-};
-
 unsigned int dbs_update(struct cpufreq_policy *policy)
 {
 	struct policy_dbs_info *policy_dbs = policy->governor_data;
@@ -184,14 +137,14 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
 	/* Get Absolute Load */
 	for_each_cpu(j, policy->cpus) {
 		struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
-		u64 cur_wall_time, cur_idle_time;
-		unsigned int idle_time, wall_time;
+		u64 update_time, cur_idle_time;
+		unsigned int idle_time, time_elapsed;
 		unsigned int load;
 
-		cur_idle_time = get_cpu_idle_time(j, &cur_wall_time, io_busy);
+		cur_idle_time = get_cpu_idle_time(j, &update_time, io_busy);
 
-		wall_time = cur_wall_time - j_cdbs->prev_cpu_wall;
-		j_cdbs->prev_cpu_wall = cur_wall_time;
+		time_elapsed = update_time - j_cdbs->prev_update_time;
+		j_cdbs->prev_update_time = update_time;
 
 		idle_time = cur_idle_time - j_cdbs->prev_cpu_idle;
 		j_cdbs->prev_cpu_idle = cur_idle_time;
@@ -203,47 +156,62 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
 			j_cdbs->prev_cpu_nice = cur_nice;
 		}
 
-		if (unlikely(!wall_time || wall_time < idle_time))
-			continue;
-
-		/*
-		 * If the CPU had gone completely idle, and a task just woke up
-		 * on this CPU now, it would be unfair to calculate 'load' the
-		 * usual way for this elapsed time-window, because it will show
-		 * near-zero load, irrespective of how CPU intensive that task
-		 * actually is. This is undesirable for latency-sensitive bursty
-		 * workloads.
-		 *
-		 * To avoid this, we reuse the 'load' from the previous
-		 * time-window and give this task a chance to start with a
-		 * reasonably high CPU frequency. (However, we shouldn't over-do
-		 * this copy, lest we get stuck at a high load (high frequency)
-		 * for too long, even when the current system load has actually
-		 * dropped down. So we perform the copy only once, upon the
-		 * first wake-up from idle.)
-		 *
-		 * Detecting this situation is easy: the governor's utilization
-		 * update handler would not have run during CPU-idle periods.
-		 * Hence, an unusually large 'wall_time' (as compared to the
-		 * sampling rate) indicates this scenario.
-		 *
-		 * prev_load can be zero in two cases and we must recalculate it
-		 * for both cases:
-		 * - during long idle intervals
-		 * - explicitly set to zero
-		 */
-		if (unlikely(wall_time > (2 * sampling_rate) &&
-			     j_cdbs->prev_load)) {
+		if (unlikely(!time_elapsed)) {
+			/*
+			 * That can only happen when this function is called
+			 * twice in a row with a very short interval between the
+			 * calls, so the previous load value can be used then.
+			 */
 			load = j_cdbs->prev_load;
-
+		} else if (unlikely(time_elapsed > 2 * sampling_rate &&
+				    j_cdbs->prev_load)) {
 			/*
-			 * Perform a destructive copy, to ensure that we copy
-			 * the previous load only once, upon the first wake-up
-			 * from idle.
+			 * If the CPU had gone completely idle and a task has
+			 * just woken up on this CPU now, it would be unfair to
+			 * calculate 'load' the usual way for this elapsed
+			 * time-window, because it would show near-zero load,
+			 * irrespective of how CPU intensive that task actually
+			 * was. This is undesirable for latency-sensitive bursty
+			 * workloads.
+			 *
+			 * To avoid this, reuse the 'load' from the previous
+			 * time-window and give this task a chance to start with
+			 * a reasonably high CPU frequency. However, that
+			 * shouldn't be over-done, lest we get stuck at a high
+			 * load (high frequency) for too long, even when the
+			 * current system load has actually dropped down, so
+			 * clear prev_load to guarantee that the load will be
+			 * computed again next time.
+			 *
+			 * Detecting this situation is easy: the governor's
+			 * utilization update handler would not have run during
+			 * CPU-idle periods.  Hence, an unusually large
+			 * 'time_elapsed' (as compared to the sampling rate)
+			 * indicates this scenario.
 			 */
+			load = j_cdbs->prev_load;
 			j_cdbs->prev_load = 0;
 		} else {
-			load = 100 * (wall_time - idle_time) / wall_time;
+			if (time_elapsed >= idle_time) {
+				load = 100 * (time_elapsed - idle_time) / time_elapsed;
+			} else {
+				/*
+				 * That can happen if idle_time is returned by
+				 * get_cpu_idle_time_jiffy().  In that case
+				 * idle_time is roughly equal to the difference
+				 * between time_elapsed and "busy time" obtained
+				 * from CPU statistics.  Then, the "busy time"
+				 * can end up being greater than time_elapsed
+				 * (for example, if jiffies_64 and the CPU
+				 * statistics are updated by different CPUs),
+				 * so idle_time may in fact be negative.  That
+				 * means, though, that the CPU was busy all
+				 * the time (on the rough average) during the
+				 * last sampling interval and 100 can be
+				 * returned as the load.
+				 */
+				load = (int)idle_time < 0 ? 100 : 0;
+			}
 			j_cdbs->prev_load = load;
 		}
 
@@ -254,43 +222,6 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
 }
 EXPORT_SYMBOL_GPL(dbs_update);
 
-static void gov_set_update_util(struct policy_dbs_info *policy_dbs,
-				unsigned int delay_us)
-{
-	struct cpufreq_policy *policy = policy_dbs->policy;
-	int cpu;
-
-	gov_update_sample_delay(policy_dbs, delay_us);
-	policy_dbs->last_sample_time = 0;
-
-	for_each_cpu(cpu, policy->cpus) {
-		struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu);
-
-		cpufreq_set_update_util_data(cpu, &cdbs->update_util);
-	}
-}
-
-static inline void gov_clear_update_util(struct cpufreq_policy *policy)
-{
-	int i;
-
-	for_each_cpu(i, policy->cpus)
-		cpufreq_set_update_util_data(i, NULL);
-
-	synchronize_sched();
-}
-
-static void gov_cancel_work(struct cpufreq_policy *policy)
-{
-	struct policy_dbs_info *policy_dbs = policy->governor_data;
-
-	gov_clear_update_util(policy_dbs->policy);
-	irq_work_sync(&policy_dbs->irq_work);
-	cancel_work_sync(&policy_dbs->work);
-	atomic_set(&policy_dbs->work_count, 0);
-	policy_dbs->work_in_progress = false;
-}
-
 static void dbs_work_handler(struct work_struct *work)
 {
 	struct policy_dbs_info *policy_dbs;
@@ -378,6 +309,44 @@ static void dbs_update_util_handler(struct update_util_data *data, u64 time,
 	irq_work_queue(&policy_dbs->irq_work);
 }
 
+static void gov_set_update_util(struct policy_dbs_info *policy_dbs,
+				unsigned int delay_us)
+{
+	struct cpufreq_policy *policy = policy_dbs->policy;
+	int cpu;
+
+	gov_update_sample_delay(policy_dbs, delay_us);
+	policy_dbs->last_sample_time = 0;
+
+	for_each_cpu(cpu, policy->cpus) {
+		struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu);
+
+		cpufreq_add_update_util_hook(cpu, &cdbs->update_util,
+					     dbs_update_util_handler);
+	}
+}
+
+static inline void gov_clear_update_util(struct cpufreq_policy *policy)
+{
+	int i;
+
+	for_each_cpu(i, policy->cpus)
+		cpufreq_remove_update_util_hook(i);
+
+	synchronize_sched();
+}
+
+static void gov_cancel_work(struct cpufreq_policy *policy)
+{
+	struct policy_dbs_info *policy_dbs = policy->governor_data;
+
+	gov_clear_update_util(policy_dbs->policy);
+	irq_work_sync(&policy_dbs->irq_work);
+	cancel_work_sync(&policy_dbs->work);
+	atomic_set(&policy_dbs->work_count, 0);
+	policy_dbs->work_in_progress = false;
+}
+
 static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *policy,
 						     struct dbs_governor *gov)
 {
@@ -400,7 +369,6 @@ static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *poli
 		struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
 
 		j_cdbs->policy_dbs = policy_dbs;
-		j_cdbs->update_util.func = dbs_update_util_handler;
 	}
 	return policy_dbs;
 }
@@ -449,10 +417,7 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy)
 		policy_dbs->dbs_data = dbs_data;
 		policy->governor_data = policy_dbs;
 
-		mutex_lock(&dbs_data->mutex);
-		dbs_data->usage_count++;
-		list_add(&policy_dbs->list, &dbs_data->policy_dbs_list);
-		mutex_unlock(&dbs_data->mutex);
+		gov_attr_set_get(&dbs_data->attr_set, &policy_dbs->list);
 		goto out;
 	}
 
@@ -462,8 +427,7 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy)
 		goto free_policy_dbs_info;
 	}
 
-	INIT_LIST_HEAD(&dbs_data->policy_dbs_list);
-	mutex_init(&dbs_data->mutex);
+	gov_attr_set_init(&dbs_data->attr_set, &policy_dbs->list);
 
 	ret = gov->init(dbs_data, !policy->governor->initialized);
 	if (ret)
@@ -483,14 +447,11 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy)
 	if (!have_governor_per_policy())
 		gov->gdbs_data = dbs_data;
 
-	policy->governor_data = policy_dbs;
-
 	policy_dbs->dbs_data = dbs_data;
-	dbs_data->usage_count = 1;
-	list_add(&policy_dbs->list, &dbs_data->policy_dbs_list);
+	policy->governor_data = policy_dbs;
 
 	gov->kobj_type.sysfs_ops = &governor_sysfs_ops;
-	ret = kobject_init_and_add(&dbs_data->kobj, &gov->kobj_type,
+	ret = kobject_init_and_add(&dbs_data->attr_set.kobj, &gov->kobj_type,
 				   get_governor_parent_kobj(policy),
 				   "%s", gov->gov.name);
 	if (!ret)
@@ -519,29 +480,21 @@ static int cpufreq_governor_exit(struct cpufreq_policy *policy)
 	struct dbs_governor *gov = dbs_governor_of(policy);
 	struct policy_dbs_info *policy_dbs = policy->governor_data;
 	struct dbs_data *dbs_data = policy_dbs->dbs_data;
-	int count;
+	unsigned int count;
 
 	/* Protect gov->gdbs_data against concurrent updates. */
 	mutex_lock(&gov_dbs_data_mutex);
 
-	mutex_lock(&dbs_data->mutex);
-	list_del(&policy_dbs->list);
-	count = --dbs_data->usage_count;
-	mutex_unlock(&dbs_data->mutex);
+	count = gov_attr_set_put(&dbs_data->attr_set, &policy_dbs->list);
 
-	if (!count) {
-		kobject_put(&dbs_data->kobj);
-
-		policy->governor_data = NULL;
+	policy->governor_data = NULL;
 
+	if (!count) {
 		if (!have_governor_per_policy())
 			gov->gdbs_data = NULL;
 
 		gov->exit(dbs_data, policy->governor->initialized == 1);
-		mutex_destroy(&dbs_data->mutex);
 		kfree(dbs_data);
-	} else {
-		policy->governor_data = NULL;
 	}
 
 	free_policy_dbs_info(policy_dbs, gov);
@@ -570,12 +523,12 @@ static int cpufreq_governor_start(struct cpufreq_policy *policy)
 
 	for_each_cpu(j, policy->cpus) {
 		struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
-		unsigned int prev_load;
 
-		j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_cpu_wall, io_busy);
-
-		prev_load = j_cdbs->prev_cpu_wall - j_cdbs->prev_cpu_idle;
-		j_cdbs->prev_load = 100 * prev_load / (unsigned int)j_cdbs->prev_cpu_wall;
+		j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, io_busy);
+		/*
+		 * Make the first invocation of dbs_update() compute the load.
+		 */
+		j_cdbs->prev_load = 0;
 
 		if (ignore_nice)
 			j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index 61ff82fe0613296678532621847e5cd42361ad33..34eb214b6d57a4597727f7d21c8791cc38faa276 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -24,20 +24,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 
-/*
- * The polling frequency depends on the capability of the processor. Default
- * polling frequency is 1000 times the transition latency of the processor. The
- * governor will work on any processor with transition latency <= 10ms, using
- * appropriate sampling rate.
- *
- * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work. All times here are in us (micro seconds).
- */
-#define MIN_SAMPLING_RATE_RATIO			(2)
-#define LATENCY_MULTIPLIER			(1000)
-#define MIN_LATENCY_MULTIPLIER			(20)
-#define TRANSITION_LATENCY_LIMIT		(10 * 1000 * 1000)
-
 /* Ondemand Sampling types */
 enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
 
@@ -52,7 +38,7 @@ enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
 
 /* Governor demand based switching data (per-policy or global). */
 struct dbs_data {
-	int usage_count;
+	struct gov_attr_set attr_set;
 	void *tuners;
 	unsigned int min_sampling_rate;
 	unsigned int ignore_nice_load;
@@ -60,37 +46,27 @@ struct dbs_data {
 	unsigned int sampling_down_factor;
 	unsigned int up_threshold;
 	unsigned int io_is_busy;
-
-	struct kobject kobj;
-	struct list_head policy_dbs_list;
-	/*
-	 * Protect concurrent updates to governor tunables from sysfs,
-	 * policy_dbs_list and usage_count.
-	 */
-	struct mutex mutex;
 };
 
-/* Governor's specific attributes */
-struct dbs_data;
-struct governor_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct dbs_data *dbs_data, char *buf);
-	ssize_t (*store)(struct dbs_data *dbs_data, const char *buf,
-			 size_t count);
-};
+static inline struct dbs_data *to_dbs_data(struct gov_attr_set *attr_set)
+{
+	return container_of(attr_set, struct dbs_data, attr_set);
+}
 
 #define gov_show_one(_gov, file_name)					\
 static ssize_t show_##file_name						\
-(struct dbs_data *dbs_data, char *buf)					\
+(struct gov_attr_set *attr_set, char *buf)				\
 {									\
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);		\
 	struct _gov##_dbs_tuners *tuners = dbs_data->tuners;		\
 	return sprintf(buf, "%u\n", tuners->file_name);			\
 }
 
 #define gov_show_one_common(file_name)					\
 static ssize_t show_##file_name						\
-(struct dbs_data *dbs_data, char *buf)					\
+(struct gov_attr_set *attr_set, char *buf)				\
 {									\
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);		\
 	return sprintf(buf, "%u\n", dbs_data->file_name);		\
 }
 
@@ -135,7 +111,7 @@ static inline void gov_update_sample_delay(struct policy_dbs_info *policy_dbs,
 /* Per cpu structures */
 struct cpu_dbs_info {
 	u64 prev_cpu_idle;
-	u64 prev_cpu_wall;
+	u64 prev_update_time;
 	u64 prev_cpu_nice;
 	/*
 	 * Used to keep track of load in the previous interval. However, when
@@ -184,7 +160,7 @@ void od_register_powersave_bias_handler(unsigned int (*f)
 		(struct cpufreq_policy *, unsigned int, unsigned int),
 		unsigned int powersave_bias);
 void od_unregister_powersave_bias_handler(void);
-ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf,
+ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
 			    size_t count);
 void gov_update_cpu_data(struct dbs_data *dbs_data);
 #endif /* _CPUFREQ_GOVERNOR_H */
diff --git a/drivers/cpufreq/cpufreq_governor_attr_set.c b/drivers/cpufreq/cpufreq_governor_attr_set.c
new file mode 100644
index 0000000000000000000000000000000000000000..52841f807a7eb329d9ce8a976dca405d1b29bbba
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_governor_attr_set.c
@@ -0,0 +1,84 @@
+/*
+ * Abstract code for CPUFreq governor tunable sysfs attributes.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cpufreq_governor.h"
+
+static inline struct gov_attr_set *to_gov_attr_set(struct kobject *kobj)
+{
+	return container_of(kobj, struct gov_attr_set, kobj);
+}
+
+static inline struct governor_attr *to_gov_attr(struct attribute *attr)
+{
+	return container_of(attr, struct governor_attr, attr);
+}
+
+static ssize_t governor_show(struct kobject *kobj, struct attribute *attr,
+			     char *buf)
+{
+	struct governor_attr *gattr = to_gov_attr(attr);
+
+	return gattr->show(to_gov_attr_set(kobj), buf);
+}
+
+static ssize_t governor_store(struct kobject *kobj, struct attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct gov_attr_set *attr_set = to_gov_attr_set(kobj);
+	struct governor_attr *gattr = to_gov_attr(attr);
+	int ret;
+
+	mutex_lock(&attr_set->update_lock);
+	ret = attr_set->usage_count ? gattr->store(attr_set, buf, count) : -EBUSY;
+	mutex_unlock(&attr_set->update_lock);
+	return ret;
+}
+
+const struct sysfs_ops governor_sysfs_ops = {
+	.show	= governor_show,
+	.store	= governor_store,
+};
+EXPORT_SYMBOL_GPL(governor_sysfs_ops);
+
+void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+	INIT_LIST_HEAD(&attr_set->policy_list);
+	mutex_init(&attr_set->update_lock);
+	attr_set->usage_count = 1;
+	list_add(list_node, &attr_set->policy_list);
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_init);
+
+void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+	mutex_lock(&attr_set->update_lock);
+	attr_set->usage_count++;
+	list_add(list_node, &attr_set->policy_list);
+	mutex_unlock(&attr_set->update_lock);
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_get);
+
+unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+	unsigned int count;
+
+	mutex_lock(&attr_set->update_lock);
+	list_del(list_node);
+	count = --attr_set->usage_count;
+	mutex_unlock(&attr_set->update_lock);
+	if (count)
+		return count;
+
+	kobject_put(&attr_set->kobj);
+	mutex_destroy(&attr_set->update_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_put);
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index acd80272ded67b46ad651cb0eceb92bdf71e26d7..300163430516766d56b842d8d12dc33175eee66b 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -207,9 +207,10 @@ static unsigned int od_dbs_timer(struct cpufreq_policy *policy)
 /************************** sysfs interface ************************/
 static struct dbs_governor od_dbs_gov;
 
-static ssize_t store_io_is_busy(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_io_is_busy(struct gov_attr_set *attr_set, const char *buf,
+				size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	unsigned int input;
 	int ret;
 
@@ -224,9 +225,10 @@ static ssize_t store_io_is_busy(struct dbs_data *dbs_data, const char *buf,
 	return count;
 }
 
-static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_up_threshold(struct gov_attr_set *attr_set,
+				  const char *buf, size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	unsigned int input;
 	int ret;
 	ret = sscanf(buf, "%u", &input);
@@ -240,9 +242,10 @@ static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
 	return count;
 }
 
-static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
-		const char *buf, size_t count)
+static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set,
+					  const char *buf, size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	struct policy_dbs_info *policy_dbs;
 	unsigned int input;
 	int ret;
@@ -254,7 +257,7 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
 	dbs_data->sampling_down_factor = input;
 
 	/* Reset down sampling multiplier in case it was active */
-	list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) {
+	list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
 		/*
 		 * Doing this without locking might lead to using different
 		 * rate_mult values in od_update() and od_dbs_timer().
@@ -267,9 +270,10 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
 	return count;
 }
 
-static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
-		const char *buf, size_t count)
+static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set,
+				      const char *buf, size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	unsigned int input;
 	int ret;
 
@@ -291,9 +295,10 @@ static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
 	return count;
 }
 
-static ssize_t store_powersave_bias(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_powersave_bias(struct gov_attr_set *attr_set,
+				    const char *buf, size_t count)
 {
+	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
 	struct policy_dbs_info *policy_dbs;
 	unsigned int input;
@@ -308,7 +313,7 @@ static ssize_t store_powersave_bias(struct dbs_data *dbs_data, const char *buf,
 
 	od_tuners->powersave_bias = input;
 
-	list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list)
+	list_for_each_entry(policy_dbs, &attr_set->policy_list, list)
 		ondemand_powersave_bias_init(policy_dbs->policy);
 
 	return count;
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index 4d16f45ee1daf3e64e23c97a9cec8b7a4ea0fc0f..9f3dec9a3f36db98407c743a0fc6493476b14bcf 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 
 static DEFINE_PER_CPU(unsigned int, cpu_is_managed);
 static DEFINE_MUTEX(userspace_mutex);
@@ -31,6 +32,7 @@ static DEFINE_MUTEX(userspace_mutex);
 static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
 {
 	int ret = -EINVAL;
+	unsigned int *setspeed = policy->governor_data;
 
 	pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
 
@@ -38,6 +40,8 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
 	if (!per_cpu(cpu_is_managed, policy->cpu))
 		goto err;
 
+	*setspeed = freq;
+
 	ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L);
  err:
 	mutex_unlock(&userspace_mutex);
@@ -49,19 +53,45 @@ static ssize_t show_speed(struct cpufreq_policy *policy, char *buf)
 	return sprintf(buf, "%u\n", policy->cur);
 }
 
+static int cpufreq_userspace_policy_init(struct cpufreq_policy *policy)
+{
+	unsigned int *setspeed;
+
+	setspeed = kzalloc(sizeof(*setspeed), GFP_KERNEL);
+	if (!setspeed)
+		return -ENOMEM;
+
+	policy->governor_data = setspeed;
+	return 0;
+}
+
 static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 				   unsigned int event)
 {
+	unsigned int *setspeed = policy->governor_data;
 	unsigned int cpu = policy->cpu;
 	int rc = 0;
 
+	if (event == CPUFREQ_GOV_POLICY_INIT)
+		return cpufreq_userspace_policy_init(policy);
+
+	if (!setspeed)
+		return -EINVAL;
+
 	switch (event) {
+	case CPUFREQ_GOV_POLICY_EXIT:
+		mutex_lock(&userspace_mutex);
+		policy->governor_data = NULL;
+		kfree(setspeed);
+		mutex_unlock(&userspace_mutex);
+		break;
 	case CPUFREQ_GOV_START:
 		BUG_ON(!policy->cur);
 		pr_debug("started managing cpu %u\n", cpu);
 
 		mutex_lock(&userspace_mutex);
 		per_cpu(cpu_is_managed, cpu) = 1;
+		*setspeed = policy->cur;
 		mutex_unlock(&userspace_mutex);
 		break;
 	case CPUFREQ_GOV_STOP:
@@ -69,20 +99,23 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 
 		mutex_lock(&userspace_mutex);
 		per_cpu(cpu_is_managed, cpu) = 0;
+		*setspeed = 0;
 		mutex_unlock(&userspace_mutex);
 		break;
 	case CPUFREQ_GOV_LIMITS:
 		mutex_lock(&userspace_mutex);
-		pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz\n",
-			cpu, policy->min, policy->max,
-			policy->cur);
+		pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\n",
+			cpu, policy->min, policy->max, policy->cur, *setspeed);
 
-		if (policy->max < policy->cur)
+		if (policy->max < *setspeed)
 			__cpufreq_driver_target(policy, policy->max,
 						CPUFREQ_RELATION_H);
-		else if (policy->min > policy->cur)
+		else if (policy->min > *setspeed)
 			__cpufreq_driver_target(policy, policy->min,
 						CPUFREQ_RELATION_L);
+		else
+			__cpufreq_driver_target(policy, *setspeed,
+						CPUFREQ_RELATION_L);
 		mutex_unlock(&userspace_mutex);
 		break;
 	}
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 4085244c8a67075b7d4d14fda6e92d3c9d5280e3..cdf097b298623d6c0878ddf58a820578cbd41537 100644
--- a/drivers/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
@@ -6,6 +6,8 @@
  *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -20,7 +22,7 @@
 #include <asm/msr.h>
 #include <asm/tsc.h>
 
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
 #include <linux/acpi.h>
 #include <acpi/processor.h>
 #endif
@@ -33,7 +35,7 @@
 
 struct eps_cpu_data {
 	u32 fsb;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
 	u32 bios_limit;
 #endif
 	struct cpufreq_frequency_table freq_table[];
@@ -46,7 +48,7 @@ static int freq_failsafe_off;
 static int voltage_failsafe_off;
 static int set_max_voltage;
 
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
 static int ignore_acpi_limit;
 
 static struct acpi_processor_performance *eps_acpi_cpu_perf;
@@ -141,11 +143,9 @@ static int eps_set_state(struct eps_cpu_data *centaur,
 	/* Print voltage and multiplier */
 	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
 	current_voltage = lo & 0xff;
-	printk(KERN_INFO "eps: Current voltage = %dmV\n",
-		current_voltage * 16 + 700);
+	pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700);
 	current_multiplier = (lo >> 8) & 0xff;
-	printk(KERN_INFO "eps: Current multiplier = %d\n",
-		current_multiplier);
+	pr_info("Current multiplier = %d\n", current_multiplier);
 	}
 #endif
 	return 0;
@@ -166,7 +166,7 @@ static int eps_target(struct cpufreq_policy *policy, unsigned int index)
 	dest_state = centaur->freq_table[index].driver_data & 0xffff;
 	ret = eps_set_state(centaur, policy, dest_state);
 	if (ret)
-		printk(KERN_ERR "eps: Timeout!\n");
+		pr_err("Timeout!\n");
 	return ret;
 }
 
@@ -186,7 +186,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 	int k, step, voltage;
 	int ret;
 	int states;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
 	unsigned int limit;
 #endif
 
@@ -194,36 +194,36 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 		return -ENODEV;
 
 	/* Check brand */
-	printk(KERN_INFO "eps: Detected VIA ");
+	pr_info("Detected VIA ");
 
 	switch (c->x86_model) {
 	case 10:
 		rdmsr(0x1153, lo, hi);
 		brand = (((lo >> 2) ^ lo) >> 18) & 3;
-		printk(KERN_CONT "Model A ");
+		pr_cont("Model A ");
 		break;
 	case 13:
 		rdmsr(0x1154, lo, hi);
 		brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff;
-		printk(KERN_CONT "Model D ");
+		pr_cont("Model D ");
 		break;
 	}
 
 	switch (brand) {
 	case EPS_BRAND_C7M:
-		printk(KERN_CONT "C7-M\n");
+		pr_cont("C7-M\n");
 		break;
 	case EPS_BRAND_C7:
-		printk(KERN_CONT "C7\n");
+		pr_cont("C7\n");
 		break;
 	case EPS_BRAND_EDEN:
-		printk(KERN_CONT "Eden\n");
+		pr_cont("Eden\n");
 		break;
 	case EPS_BRAND_C7D:
-		printk(KERN_CONT "C7-D\n");
+		pr_cont("C7-D\n");
 		break;
 	case EPS_BRAND_C3:
-		printk(KERN_CONT "C3\n");
+		pr_cont("C3\n");
 		return -ENODEV;
 		break;
 	}
@@ -235,7 +235,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 		/* Can be locked at 0 */
 		rdmsrl(MSR_IA32_MISC_ENABLE, val);
 		if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
-			printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n");
+			pr_info("Can't enable Enhanced PowerSaver\n");
 			return -ENODEV;
 		}
 	}
@@ -243,22 +243,19 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 	/* Print voltage and multiplier */
 	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
 	current_voltage = lo & 0xff;
-	printk(KERN_INFO "eps: Current voltage = %dmV\n",
-			current_voltage * 16 + 700);
+	pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700);
 	current_multiplier = (lo >> 8) & 0xff;
-	printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier);
+	pr_info("Current multiplier = %d\n", current_multiplier);
 
 	/* Print limits */
 	max_voltage = hi & 0xff;
-	printk(KERN_INFO "eps: Highest voltage = %dmV\n",
-			max_voltage * 16 + 700);
+	pr_info("Highest voltage = %dmV\n", max_voltage * 16 + 700);
 	max_multiplier = (hi >> 8) & 0xff;
-	printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier);
+	pr_info("Highest multiplier = %d\n", max_multiplier);
 	min_voltage = (hi >> 16) & 0xff;
-	printk(KERN_INFO "eps: Lowest voltage = %dmV\n",
-			min_voltage * 16 + 700);
+	pr_info("Lowest voltage = %dmV\n", min_voltage * 16 + 700);
 	min_multiplier = (hi >> 24) & 0xff;
-	printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier);
+	pr_info("Lowest multiplier = %d\n", min_multiplier);
 
 	/* Sanity checks */
 	if (current_multiplier == 0 || max_multiplier == 0
@@ -276,34 +273,30 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 
 	/* Check for systems using underclocked CPU */
 	if (!freq_failsafe_off && max_multiplier != current_multiplier) {
-		printk(KERN_INFO "eps: Your processor is running at different "
-			"frequency then its maximum. Aborting.\n");
-		printk(KERN_INFO "eps: You can use freq_failsafe_off option "
-			"to disable this check.\n");
+		pr_info("Your processor is running at different frequency then its maximum. Aborting.\n");
+		pr_info("You can use freq_failsafe_off option to disable this check.\n");
 		return -EINVAL;
 	}
 	if (!voltage_failsafe_off && max_voltage != current_voltage) {
-		printk(KERN_INFO "eps: Your processor is running at different "
-			"voltage then its maximum. Aborting.\n");
-		printk(KERN_INFO "eps: You can use voltage_failsafe_off "
-			"option to disable this check.\n");
+		pr_info("Your processor is running at different voltage then its maximum. Aborting.\n");
+		pr_info("You can use voltage_failsafe_off option to disable this check.\n");
 		return -EINVAL;
 	}
 
 	/* Calc FSB speed */
 	fsb = cpu_khz / current_multiplier;
 
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
 	/* Check for ACPI processor speed limit */
 	if (!ignore_acpi_limit && !eps_acpi_init()) {
 		if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
-			printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n",
+			pr_info("ACPI limit %u.%uGHz\n",
 				limit/1000000,
 				(limit%1000000)/10000);
 			eps_acpi_exit(policy);
 			/* Check if max_multiplier is in BIOS limits */
 			if (limit && max_multiplier * fsb > limit) {
-				printk(KERN_INFO "eps: Aborting.\n");
+				pr_info("Aborting\n");
 				return -EINVAL;
 			}
 		}
@@ -319,8 +312,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 		v = (set_max_voltage - 700) / 16;
 		/* Check if voltage is within limits */
 		if (v >= min_voltage && v <= max_voltage) {
-			printk(KERN_INFO "eps: Setting %dmV as maximum.\n",
-				v * 16 + 700);
+			pr_info("Setting %dmV as maximum\n", v * 16 + 700);
 			max_voltage = v;
 		}
 	}
@@ -341,7 +333,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 
 	/* Copy basic values */
 	centaur->fsb = fsb;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
 	centaur->bios_limit = limit;
 #endif
 
@@ -426,7 +418,7 @@ module_param(freq_failsafe_off, int, 0644);
 MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
 module_param(voltage_failsafe_off, int, 0644);
 MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
 module_param(ignore_acpi_limit, int, 0644);
 MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
 #endif
diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c
index 1c06e786c9baa53f587579ab932701e0a51d5a3f..bfce11cba1df8d92068b4095e1772ce38b7db12e 100644
--- a/drivers/cpufreq/elanfreq.c
+++ b/drivers/cpufreq/elanfreq.c
@@ -16,6 +16,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -185,7 +187,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
 static int __init elanfreq_setup(char *str)
 {
 	max_freq = simple_strtoul(str, &str, 0);
-	printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+	pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
 	return 1;
 }
 __setup("elanfreq=", elanfreq_setup);
diff --git a/drivers/cpufreq/hisi-acpu-cpufreq.c b/drivers/cpufreq/hisi-acpu-cpufreq.c
deleted file mode 100644
index 026d5b2224de0ad7d890795ab769832feb5fd213..0000000000000000000000000000000000000000
--- a/drivers/cpufreq/hisi-acpu-cpufreq.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Hisilicon Platforms Using ACPU CPUFreq Support
- *
- * Copyright (c) 2015 Hisilicon Limited.
- * Copyright (c) 2015 Linaro Limited.
- *
- * Leo Yan <leo.yan@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-
-static int __init hisi_acpu_cpufreq_driver_init(void)
-{
-	struct platform_device *pdev;
-
-	if (!of_machine_is_compatible("hisilicon,hi6220"))
-		return -ENODEV;
-
-	pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-	return PTR_ERR_OR_ZERO(pdev);
-}
-module_init(hisi_acpu_cpufreq_driver_init);
-
-MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>");
-MODULE_DESCRIPTION("Hisilicon acpu cpufreq driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c
index 0202429f1c5bbe01f0ec43dda5d5ad7c5a092d1a..759612da4fdcee8fa61a938d6d0c6ddfa5c0dfb1 100644
--- a/drivers/cpufreq/ia64-acpi-cpufreq.c
+++ b/drivers/cpufreq/ia64-acpi-cpufreq.c
@@ -8,6 +8,8 @@
  *      Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -118,8 +120,7 @@ processor_get_freq (
 
 	if (ret) {
 		set_cpus_allowed_ptr(current, &saved_mask);
-		printk(KERN_WARNING "get performance failed with error %d\n",
-		       ret);
+		pr_warn("get performance failed with error %d\n", ret);
 		ret = 0;
 		goto migrate_end;
 	}
@@ -177,7 +178,7 @@ processor_set_freq (
 
 	ret = processor_set_pstate(value);
 	if (ret) {
-		printk(KERN_WARNING "Transition failed with error %d\n", ret);
+		pr_warn("Transition failed with error %d\n", ret);
 		retval = -ENODEV;
 		goto migrate_end;
 	}
@@ -291,8 +292,7 @@ acpi_cpufreq_cpu_init (
 	/* notify BIOS that we exist */
 	acpi_processor_notify_smm(THIS_MODULE);
 
-	printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management "
-	       "activated.\n", cpu);
+	pr_info("CPU%u - ACPI performance management activated\n", cpu);
 
 	for (i = 0; i < data->acpi_data.state_count; i++)
 		pr_debug("     %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index b230ebaae66cb7ee0def1d228ff33c778343f344..b76a98dd9988b4f553ddbdd47b663f8720e5fc89 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -10,6 +10,8 @@
  * of the License.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/kernel_stat.h>
 #include <linux/module.h>
@@ -39,10 +41,17 @@
 #define ATOM_TURBO_RATIOS	0x66c
 #define ATOM_TURBO_VIDS		0x66d
 
+#ifdef CONFIG_ACPI
+#include <acpi/processor.h>
+#endif
+
 #define FRAC_BITS 8
 #define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
 #define fp_toint(X) ((X) >> FRAC_BITS)
 
+#define EXT_BITS 6
+#define EXT_FRAC_BITS (EXT_BITS + FRAC_BITS)
+
 static inline int32_t mul_fp(int32_t x, int32_t y)
 {
 	return ((int64_t)x * (int64_t)y) >> FRAC_BITS;
@@ -64,12 +73,22 @@ static inline int ceiling_fp(int32_t x)
 	return ret;
 }
 
+static inline u64 mul_ext_fp(u64 x, u64 y)
+{
+	return (x * y) >> EXT_FRAC_BITS;
+}
+
+static inline u64 div_ext_fp(u64 x, u64 y)
+{
+	return div64_u64(x << EXT_FRAC_BITS, y);
+}
+
 /**
  * struct sample -	Store performance sample
- * @core_pct_busy:	Ratio of APERF/MPERF in percent, which is actual
+ * @core_avg_perf:	Ratio of APERF/MPERF which is the actual average
  *			performance during last sample period
  * @busy_scaled:	Scaled busy value which is used to calculate next
- *			P state. This can be different than core_pct_busy
+ *			P state. This can be different than core_avg_perf
  *			to account for cpu idle period
  * @aperf:		Difference of actual performance frequency clock count
  *			read from APERF MSR between last and current sample
@@ -84,7 +103,7 @@ static inline int ceiling_fp(int32_t x)
  * data for choosing next P State.
  */
 struct sample {
-	int32_t core_pct_busy;
+	int32_t core_avg_perf;
 	int32_t busy_scaled;
 	u64 aperf;
 	u64 mperf;
@@ -162,6 +181,7 @@ struct _pid {
  * struct cpudata -	Per CPU instance data storage
  * @cpu:		CPU number for this instance data
  * @update_util:	CPUFreq utility callback information
+ * @update_util_set:	CPUFreq utility callback is set
  * @pstate:		Stores P state limits for this CPU
  * @vid:		Stores VID limits for this CPU
  * @pid:		Stores PID parameters for this CPU
@@ -172,6 +192,8 @@ struct _pid {
  * @prev_cummulative_iowait: IO Wait time difference from last and
  *			current sample
  * @sample:		Storage for storing last Sample data
+ * @acpi_perf_data:	Stores ACPI perf information read from _PSS
+ * @valid_pss_table:	Set to true for valid ACPI _PSS entries found
  *
  * This structure stores per CPU instance data for all CPUs.
  */
@@ -179,6 +201,7 @@ struct cpudata {
 	int cpu;
 
 	struct update_util_data update_util;
+	bool   update_util_set;
 
 	struct pstate_data pstate;
 	struct vid_data vid;
@@ -190,6 +213,10 @@ struct cpudata {
 	u64	prev_tsc;
 	u64	prev_cummulative_iowait;
 	struct sample sample;
+#ifdef CONFIG_ACPI
+	struct acpi_processor_performance acpi_perf_data;
+	bool valid_pss_table;
+#endif
 };
 
 static struct cpudata **all_cpu_data;
@@ -258,6 +285,9 @@ static struct pstate_adjust_policy pid_params;
 static struct pstate_funcs pstate_funcs;
 static int hwp_active;
 
+#ifdef CONFIG_ACPI
+static bool acpi_ppc;
+#endif
 
 /**
  * struct perf_limits - Store user and policy limits
@@ -331,6 +361,124 @@ static struct perf_limits *limits = &performance_limits;
 static struct perf_limits *limits = &powersave_limits;
 #endif
 
+#ifdef CONFIG_ACPI
+
+static bool intel_pstate_get_ppc_enable_status(void)
+{
+	if (acpi_gbl_FADT.preferred_profile == PM_ENTERPRISE_SERVER ||
+	    acpi_gbl_FADT.preferred_profile == PM_PERFORMANCE_SERVER)
+		return true;
+
+	return acpi_ppc;
+}
+
+/*
+ * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and
+ * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and
+ * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state
+ * ratio, out of it only high 8 bits are used. For example 0x1700 is setting
+ * target ratio 0x17. The _PSS control value stores in a format which can be
+ * directly written to PERF_CTL MSR. But in intel_pstate driver this shift
+ * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()).
+ * This function converts the _PSS control value to intel pstate driver format
+ * for comparison and assignment.
+ */
+static int convert_to_native_pstate_format(struct cpudata *cpu, int index)
+{
+	return cpu->acpi_perf_data.states[index].control >> 8;
+}
+
+static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
+{
+	struct cpudata *cpu;
+	int turbo_pss_ctl;
+	int ret;
+	int i;
+
+	if (hwp_active)
+		return;
+
+	if (!intel_pstate_get_ppc_enable_status())
+		return;
+
+	cpu = all_cpu_data[policy->cpu];
+
+	ret = acpi_processor_register_performance(&cpu->acpi_perf_data,
+						  policy->cpu);
+	if (ret)
+		return;
+
+	/*
+	 * Check if the control value in _PSS is for PERF_CTL MSR, which should
+	 * guarantee that the states returned by it map to the states in our
+	 * list directly.
+	 */
+	if (cpu->acpi_perf_data.control_register.space_id !=
+						ACPI_ADR_SPACE_FIXED_HARDWARE)
+		goto err;
+
+	/*
+	 * If there is only one entry _PSS, simply ignore _PSS and continue as
+	 * usual without taking _PSS into account
+	 */
+	if (cpu->acpi_perf_data.state_count < 2)
+		goto err;
+
+	pr_debug("CPU%u - ACPI _PSS perf data\n", policy->cpu);
+	for (i = 0; i < cpu->acpi_perf_data.state_count; i++) {
+		pr_debug("     %cP%d: %u MHz, %u mW, 0x%x\n",
+			 (i == cpu->acpi_perf_data.state ? '*' : ' '), i,
+			 (u32) cpu->acpi_perf_data.states[i].core_frequency,
+			 (u32) cpu->acpi_perf_data.states[i].power,
+			 (u32) cpu->acpi_perf_data.states[i].control);
+	}
+
+	/*
+	 * The _PSS table doesn't contain whole turbo frequency range.
+	 * This just contains +1 MHZ above the max non turbo frequency,
+	 * with control value corresponding to max turbo ratio. But
+	 * when cpufreq set policy is called, it will call with this
+	 * max frequency, which will cause a reduced performance as
+	 * this driver uses real max turbo frequency as the max
+	 * frequency. So correct this frequency in _PSS table to
+	 * correct max turbo frequency based on the turbo ratio.
+	 * Also need to convert to MHz as _PSS freq is in MHz.
+	 */
+	turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0);
+	if (turbo_pss_ctl > cpu->pstate.max_pstate)
+		cpu->acpi_perf_data.states[0].core_frequency =
+					policy->cpuinfo.max_freq / 1000;
+	cpu->valid_pss_table = true;
+	pr_info("_PPC limits will be enforced\n");
+
+	return;
+
+ err:
+	cpu->valid_pss_table = false;
+	acpi_processor_unregister_performance(policy->cpu);
+}
+
+static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
+{
+	struct cpudata *cpu;
+
+	cpu = all_cpu_data[policy->cpu];
+	if (!cpu->valid_pss_table)
+		return;
+
+	acpi_processor_unregister_performance(policy->cpu);
+}
+
+#else
+static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
+{
+}
+
+static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
+{
+}
+#endif
+
 static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
 			     int deadband, int integral) {
 	pid->setpoint = int_tofp(setpoint);
@@ -341,17 +489,17 @@ static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
 
 static inline void pid_p_gain_set(struct _pid *pid, int percent)
 {
-	pid->p_gain = div_fp(int_tofp(percent), int_tofp(100));
+	pid->p_gain = div_fp(percent, 100);
 }
 
 static inline void pid_i_gain_set(struct _pid *pid, int percent)
 {
-	pid->i_gain = div_fp(int_tofp(percent), int_tofp(100));
+	pid->i_gain = div_fp(percent, 100);
 }
 
 static inline void pid_d_gain_set(struct _pid *pid, int percent)
 {
-	pid->d_gain = div_fp(int_tofp(percent), int_tofp(100));
+	pid->d_gain = div_fp(percent, 100);
 }
 
 static signed int pid_calc(struct _pid *pid, int32_t busy)
@@ -537,7 +685,7 @@ static ssize_t show_turbo_pct(struct kobject *kobj,
 
 	total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1;
 	no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1;
-	turbo_fp = div_fp(int_tofp(no_turbo), int_tofp(total));
+	turbo_fp = div_fp(no_turbo, total);
 	turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100)));
 	return sprintf(buf, "%u\n", turbo_pct);
 }
@@ -579,7 +727,7 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
 
 	update_turbo_state();
 	if (limits->turbo_disabled) {
-		pr_warn("intel_pstate: Turbo disabled by BIOS or unavailable on processor\n");
+		pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
 		return -EPERM;
 	}
 
@@ -608,8 +756,7 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
 				   limits->max_perf_pct);
 	limits->max_perf_pct = max(limits->min_perf_pct,
 				   limits->max_perf_pct);
-	limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
-				  int_tofp(100));
+	limits->max_perf = div_fp(limits->max_perf_pct, 100);
 
 	if (hwp_active)
 		intel_pstate_hwp_set_online_cpus();
@@ -633,8 +780,7 @@ static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b,
 				   limits->min_perf_pct);
 	limits->min_perf_pct = min(limits->max_perf_pct,
 				   limits->min_perf_pct);
-	limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
-				  int_tofp(100));
+	limits->min_perf = div_fp(limits->min_perf_pct, 100);
 
 	if (hwp_active)
 		intel_pstate_hwp_set_online_cpus();
@@ -1019,15 +1165,11 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
 	intel_pstate_set_min_pstate(cpu);
 }
 
-static inline void intel_pstate_calc_busy(struct cpudata *cpu)
+static inline void intel_pstate_calc_avg_perf(struct cpudata *cpu)
 {
 	struct sample *sample = &cpu->sample;
-	int64_t core_pct;
 
-	core_pct = int_tofp(sample->aperf) * int_tofp(100);
-	core_pct = div64_u64(core_pct, int_tofp(sample->mperf));
-
-	sample->core_pct_busy = (int32_t)core_pct;
+	sample->core_avg_perf = div_ext_fp(sample->aperf, sample->mperf);
 }
 
 static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time)
@@ -1070,9 +1212,14 @@ static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time)
 
 static inline int32_t get_avg_frequency(struct cpudata *cpu)
 {
-	return fp_toint(mul_fp(cpu->sample.core_pct_busy,
-			       int_tofp(cpu->pstate.max_pstate_physical *
-						cpu->pstate.scaling / 100)));
+	return mul_ext_fp(cpu->sample.core_avg_perf,
+			  cpu->pstate.max_pstate_physical * cpu->pstate.scaling);
+}
+
+static inline int32_t get_avg_pstate(struct cpudata *cpu)
+{
+	return mul_ext_fp(cpu->pstate.max_pstate_physical,
+			  cpu->sample.core_avg_perf);
 }
 
 static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu)
@@ -1107,49 +1254,43 @@ static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu)
 	cpu_load = div64_u64(int_tofp(100) * mperf, sample->tsc);
 	cpu->sample.busy_scaled = cpu_load;
 
-	return cpu->pstate.current_pstate - pid_calc(&cpu->pid, cpu_load);
+	return get_avg_pstate(cpu) - pid_calc(&cpu->pid, cpu_load);
 }
 
 static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu)
 {
-	int32_t core_busy, max_pstate, current_pstate, sample_ratio;
+	int32_t perf_scaled, max_pstate, current_pstate, sample_ratio;
 	u64 duration_ns;
 
 	/*
-	 * core_busy is the ratio of actual performance to max
-	 * max_pstate is the max non turbo pstate available
-	 * current_pstate was the pstate that was requested during
-	 * 	the last sample period.
-	 *
-	 * We normalize core_busy, which was our actual percent
-	 * performance to what we requested during the last sample
-	 * period. The result will be a percentage of busy at a
-	 * specified pstate.
+	 * perf_scaled is the average performance during the last sampling
+	 * period scaled by the ratio of the maximum P-state to the P-state
+	 * requested last time (in percent).  That measures the system's
+	 * response to the previous P-state selection.
 	 */
-	core_busy = cpu->sample.core_pct_busy;
-	max_pstate = int_tofp(cpu->pstate.max_pstate_physical);
-	current_pstate = int_tofp(cpu->pstate.current_pstate);
-	core_busy = mul_fp(core_busy, div_fp(max_pstate, current_pstate));
+	max_pstate = cpu->pstate.max_pstate_physical;
+	current_pstate = cpu->pstate.current_pstate;
+	perf_scaled = mul_ext_fp(cpu->sample.core_avg_perf,
+			       div_fp(100 * max_pstate, current_pstate));
 
 	/*
 	 * Since our utilization update callback will not run unless we are
 	 * in C0, check if the actual elapsed time is significantly greater (3x)
 	 * than our sample interval.  If it is, then we were idle for a long
-	 * enough period of time to adjust our busyness.
+	 * enough period of time to adjust our performance metric.
 	 */
 	duration_ns = cpu->sample.time - cpu->last_sample_time;
 	if ((s64)duration_ns > pid_params.sample_rate_ns * 3) {
-		sample_ratio = div_fp(int_tofp(pid_params.sample_rate_ns),
-				      int_tofp(duration_ns));
-		core_busy = mul_fp(core_busy, sample_ratio);
+		sample_ratio = div_fp(pid_params.sample_rate_ns, duration_ns);
+		perf_scaled = mul_fp(perf_scaled, sample_ratio);
 	} else {
 		sample_ratio = div_fp(100 * cpu->sample.mperf, cpu->sample.tsc);
 		if (sample_ratio < int_tofp(1))
-			core_busy = 0;
+			perf_scaled = 0;
 	}
 
-	cpu->sample.busy_scaled = core_busy;
-	return cpu->pstate.current_pstate - pid_calc(&cpu->pid, core_busy);
+	cpu->sample.busy_scaled = perf_scaled;
+	return cpu->pstate.current_pstate - pid_calc(&cpu->pid, perf_scaled);
 }
 
 static inline void intel_pstate_update_pstate(struct cpudata *cpu, int pstate)
@@ -1179,7 +1320,7 @@ static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu)
 	intel_pstate_update_pstate(cpu, target_pstate);
 
 	sample = &cpu->sample;
-	trace_pstate_sample(fp_toint(sample->core_pct_busy),
+	trace_pstate_sample(mul_ext_fp(100, sample->core_avg_perf),
 		fp_toint(sample->busy_scaled),
 		from,
 		cpu->pstate.current_pstate,
@@ -1199,7 +1340,7 @@ static void intel_pstate_update_util(struct update_util_data *data, u64 time,
 		bool sample_taken = intel_pstate_sample(cpu, time);
 
 		if (sample_taken) {
-			intel_pstate_calc_busy(cpu);
+			intel_pstate_calc_avg_perf(cpu);
 			if (!hwp_active)
 				intel_pstate_adjust_busy_pstate(cpu);
 		}
@@ -1261,23 +1402,16 @@ static int intel_pstate_init_cpu(unsigned int cpunum)
 
 	intel_pstate_busy_pid_reset(cpu);
 
-	cpu->update_util.func = intel_pstate_update_util;
-
-	pr_debug("intel_pstate: controlling: cpu %d\n", cpunum);
+	pr_debug("controlling: cpu %d\n", cpunum);
 
 	return 0;
 }
 
 static unsigned int intel_pstate_get(unsigned int cpu_num)
 {
-	struct sample *sample;
-	struct cpudata *cpu;
+	struct cpudata *cpu = all_cpu_data[cpu_num];
 
-	cpu = all_cpu_data[cpu_num];
-	if (!cpu)
-		return 0;
-	sample = &cpu->sample;
-	return get_avg_frequency(cpu);
+	return cpu ? get_avg_frequency(cpu) : 0;
 }
 
 static void intel_pstate_set_update_util_hook(unsigned int cpu_num)
@@ -1286,12 +1420,20 @@ static void intel_pstate_set_update_util_hook(unsigned int cpu_num)
 
 	/* Prevent intel_pstate_update_util() from using stale data. */
 	cpu->sample.time = 0;
-	cpufreq_set_update_util_data(cpu_num, &cpu->update_util);
+	cpufreq_add_update_util_hook(cpu_num, &cpu->update_util,
+				     intel_pstate_update_util);
+	cpu->update_util_set = true;
 }
 
 static void intel_pstate_clear_update_util_hook(unsigned int cpu)
 {
-	cpufreq_set_update_util_data(cpu, NULL);
+	struct cpudata *cpu_data = all_cpu_data[cpu];
+
+	if (!cpu_data->update_util_set)
+		return;
+
+	cpufreq_remove_update_util_hook(cpu);
+	cpu_data->update_util_set = false;
 	synchronize_sched();
 }
 
@@ -1311,20 +1453,31 @@ static void intel_pstate_set_performance_limits(struct perf_limits *limits)
 
 static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 {
+	struct cpudata *cpu;
+
 	if (!policy->cpuinfo.max_freq)
 		return -ENODEV;
 
 	intel_pstate_clear_update_util_hook(policy->cpu);
 
+	cpu = all_cpu_data[0];
+	if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate) {
+		if (policy->max < policy->cpuinfo.max_freq &&
+		    policy->max > cpu->pstate.max_pstate * cpu->pstate.scaling) {
+			pr_debug("policy->max > max non turbo frequency\n");
+			policy->max = policy->cpuinfo.max_freq;
+		}
+	}
+
 	if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
 		limits = &performance_limits;
 		if (policy->max >= policy->cpuinfo.max_freq) {
-			pr_debug("intel_pstate: set performance\n");
+			pr_debug("set performance\n");
 			intel_pstate_set_performance_limits(limits);
 			goto out;
 		}
 	} else {
-		pr_debug("intel_pstate: set powersave\n");
+		pr_debug("set powersave\n");
 		limits = &powersave_limits;
 	}
 
@@ -1348,10 +1501,8 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 	/* Make sure min_perf_pct <= max_perf_pct */
 	limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);
 
-	limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
-				  int_tofp(100));
-	limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
-				  int_tofp(100));
+	limits->min_perf = div_fp(limits->min_perf_pct, 100);
+	limits->max_perf = div_fp(limits->max_perf_pct, 100);
 
  out:
 	intel_pstate_set_update_util_hook(policy->cpu);
@@ -1377,7 +1528,7 @@ static void intel_pstate_stop_cpu(struct cpufreq_policy *policy)
 	int cpu_num = policy->cpu;
 	struct cpudata *cpu = all_cpu_data[cpu_num];
 
-	pr_debug("intel_pstate: CPU %d exiting\n", cpu_num);
+	pr_debug("CPU %d exiting\n", cpu_num);
 
 	intel_pstate_clear_update_util_hook(cpu_num);
 
@@ -1410,12 +1561,20 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
 	policy->cpuinfo.max_freq =
 		cpu->pstate.turbo_pstate * cpu->pstate.scaling;
+	intel_pstate_init_acpi_perf_limits(policy);
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 	cpumask_set_cpu(policy->cpu, policy->cpus);
 
 	return 0;
 }
 
+static int intel_pstate_cpu_exit(struct cpufreq_policy *policy)
+{
+	intel_pstate_exit_perf_limits(policy);
+
+	return 0;
+}
+
 static struct cpufreq_driver intel_pstate_driver = {
 	.flags		= CPUFREQ_CONST_LOOPS,
 	.verify		= intel_pstate_verify_policy,
@@ -1423,6 +1582,7 @@ static struct cpufreq_driver intel_pstate_driver = {
 	.resume		= intel_pstate_hwp_set_policy,
 	.get		= intel_pstate_get,
 	.init		= intel_pstate_cpu_init,
+	.exit		= intel_pstate_cpu_exit,
 	.stop_cpu	= intel_pstate_stop_cpu,
 	.name		= "intel_pstate",
 };
@@ -1466,8 +1626,7 @@ static void copy_cpu_funcs(struct pstate_funcs *funcs)
 
 }
 
-#if IS_ENABLED(CONFIG_ACPI)
-#include <acpi/processor.h>
+#ifdef CONFIG_ACPI
 
 static bool intel_pstate_no_acpi_pss(void)
 {
@@ -1623,7 +1782,7 @@ static int __init intel_pstate_init(void)
 	if (intel_pstate_platform_pwr_mgmt_exists())
 		return -ENODEV;
 
-	pr_info("Intel P-state driver initializing.\n");
+	pr_info("Intel P-state driver initializing\n");
 
 	all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus());
 	if (!all_cpu_data)
@@ -1640,7 +1799,7 @@ static int __init intel_pstate_init(void)
 	intel_pstate_sysfs_expose_params();
 
 	if (hwp_active)
-		pr_info("intel_pstate: HWP enabled\n");
+		pr_info("HWP enabled\n");
 
 	return rc;
 out:
@@ -1666,13 +1825,19 @@ static int __init intel_pstate_setup(char *str)
 	if (!strcmp(str, "disable"))
 		no_load = 1;
 	if (!strcmp(str, "no_hwp")) {
-		pr_info("intel_pstate: HWP disabled\n");
+		pr_info("HWP disabled\n");
 		no_hwp = 1;
 	}
 	if (!strcmp(str, "force"))
 		force_load = 1;
 	if (!strcmp(str, "hwp_only"))
 		hwp_only = 1;
+
+#ifdef CONFIG_ACPI
+	if (!strcmp(str, "support_acpi_ppc"))
+		acpi_ppc = true;
+#endif
+
 	return 0;
 }
 early_param("intel_pstate", intel_pstate_setup);
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index 247bfa8eaddbf3659daec2949561129e4a1a4db1..c46a12df40dd8391818956474b4381074ae70e19 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -21,6 +21,8 @@
  *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -40,8 +42,6 @@
 
 #include "longhaul.h"
 
-#define PFX "longhaul: "
-
 #define TYPE_LONGHAUL_V1	1
 #define TYPE_LONGHAUL_V2	2
 #define TYPE_POWERSAVER		3
@@ -347,14 +347,13 @@ static int longhaul_setstate(struct cpufreq_policy *policy,
 	freqs.new = calc_speed(longhaul_get_cpu_mult());
 	/* Check if requested frequency is set. */
 	if (unlikely(freqs.new != speed)) {
-		printk(KERN_INFO PFX "Failed to set requested frequency!\n");
+		pr_info("Failed to set requested frequency!\n");
 		/* Revision ID = 1 but processor is expecting revision key
 		 * equal to 0. Jumpers at the bottom of processor will change
 		 * multiplier and FSB, but will not change bits in Longhaul
 		 * MSR nor enable voltage scaling. */
 		if (!revid_errata) {
-			printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
-						"option.\n");
+			pr_info("Enabling \"Ignore Revision ID\" option\n");
 			revid_errata = 1;
 			msleep(200);
 			goto retry_loop;
@@ -364,11 +363,10 @@ static int longhaul_setstate(struct cpufreq_policy *policy,
 		 * but it doesn't change frequency. I tried poking various
 		 * bits in northbridge registers, but without success. */
 		if (longhaul_flags & USE_ACPI_C3) {
-			printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
+			pr_info("Disabling ACPI C3 support\n");
 			longhaul_flags &= ~USE_ACPI_C3;
 			if (revid_errata) {
-				printk(KERN_INFO PFX "Disabling \"Ignore "
-						"Revision ID\" option.\n");
+				pr_info("Disabling \"Ignore Revision ID\" option\n");
 				revid_errata = 0;
 			}
 			msleep(200);
@@ -379,7 +377,7 @@ static int longhaul_setstate(struct cpufreq_policy *policy,
 		 * RevID = 1. RevID errata will make things right. Just
 		 * to be 100% sure. */
 		if (longhaul_version == TYPE_LONGHAUL_V2) {
-			printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
+			pr_info("Switching to Longhaul ver. 1\n");
 			longhaul_version = TYPE_LONGHAUL_V1;
 			msleep(200);
 			goto retry_loop;
@@ -387,8 +385,7 @@ static int longhaul_setstate(struct cpufreq_policy *policy,
 	}
 
 	if (!bm_timeout) {
-		printk(KERN_INFO PFX "Warning: Timeout while waiting for "
-				"idle PCI bus.\n");
+		pr_info("Warning: Timeout while waiting for idle PCI bus\n");
 		return -EBUSY;
 	}
 
@@ -433,12 +430,12 @@ static int longhaul_get_ranges(void)
 	/* Get current frequency */
 	mult = longhaul_get_cpu_mult();
 	if (mult == -1) {
-		printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
+		pr_info("Invalid (reserved) multiplier!\n");
 		return -EINVAL;
 	}
 	fsb = guess_fsb(mult);
 	if (fsb == 0) {
-		printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
+		pr_info("Invalid (reserved) FSB!\n");
 		return -EINVAL;
 	}
 	/* Get max multiplier - as we always did.
@@ -468,11 +465,11 @@ static int longhaul_get_ranges(void)
 		 print_speed(highest_speed/1000));
 
 	if (lowest_speed == highest_speed) {
-		printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+		pr_info("highestspeed == lowest, aborting\n");
 		return -EINVAL;
 	}
 	if (lowest_speed > highest_speed) {
-		printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+		pr_info("nonsense! lowest (%d > %d) !\n",
 			lowest_speed, highest_speed);
 		return -EINVAL;
 	}
@@ -538,16 +535,16 @@ static void longhaul_setup_voltagescaling(void)
 
 	rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
 	if (!(longhaul.bits.RevisionID & 1)) {
-		printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
+		pr_info("Voltage scaling not supported by CPU\n");
 		return;
 	}
 
 	if (!longhaul.bits.VRMRev) {
-		printk(KERN_INFO PFX "VRM 8.5\n");
+		pr_info("VRM 8.5\n");
 		vrm_mV_table = &vrm85_mV[0];
 		mV_vrm_table = &mV_vrm85[0];
 	} else {
-		printk(KERN_INFO PFX "Mobile VRM\n");
+		pr_info("Mobile VRM\n");
 		if (cpu_model < CPU_NEHEMIAH)
 			return;
 		vrm_mV_table = &mobilevrm_mV[0];
@@ -558,27 +555,21 @@ static void longhaul_setup_voltagescaling(void)
 	maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
 
 	if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
-		printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
-					"Voltage scaling disabled.\n",
-					minvid.mV/1000, minvid.mV%1000,
-					maxvid.mV/1000, maxvid.mV%1000);
+		pr_info("Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n",
+			minvid.mV/1000, minvid.mV%1000,
+			maxvid.mV/1000, maxvid.mV%1000);
 		return;
 	}
 
 	if (minvid.mV == maxvid.mV) {
-		printk(KERN_INFO PFX "Claims to support voltage scaling but "
-				"min & max are both %d.%03d. "
-				"Voltage scaling disabled\n",
-				maxvid.mV/1000, maxvid.mV%1000);
+		pr_info("Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n",
+			maxvid.mV/1000, maxvid.mV%1000);
 		return;
 	}
 
 	/* How many voltage steps*/
 	numvscales = maxvid.pos - minvid.pos + 1;
-	printk(KERN_INFO PFX
-		"Max VID=%d.%03d  "
-		"Min VID=%d.%03d, "
-		"%d possible voltage scales\n",
+	pr_info("Max VID=%d.%03d  Min VID=%d.%03d, %d possible voltage scales\n",
 		maxvid.mV/1000, maxvid.mV%1000,
 		minvid.mV/1000, minvid.mV%1000,
 		numvscales);
@@ -617,12 +608,12 @@ static void longhaul_setup_voltagescaling(void)
 			pos = minvid.pos;
 		freq_pos->driver_data |= mV_vrm_table[pos] << 8;
 		vid = vrm_mV_table[mV_vrm_table[pos]];
-		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
+		pr_info("f: %d kHz, index: %d, vid: %d mV\n",
 			speed, (int)(freq_pos - longhaul_table), vid.mV);
 	}
 
 	can_scale_voltage = 1;
-	printk(KERN_INFO PFX "Voltage scaling enabled.\n");
+	pr_info("Voltage scaling enabled\n");
 }
 
 
@@ -720,8 +711,7 @@ static int enable_arbiter_disable(void)
 			pci_write_config_byte(dev, reg, pci_cmd);
 			pci_read_config_byte(dev, reg, &pci_cmd);
 			if (!(pci_cmd & 1<<7)) {
-				printk(KERN_ERR PFX
-					"Can't enable access to port 0x22.\n");
+				pr_err("Can't enable access to port 0x22\n");
 				status = 0;
 			}
 		}
@@ -758,8 +748,7 @@ static int longhaul_setup_southbridge(void)
 		if (pci_cmd & 1 << 7) {
 			pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
 			acpi_regs_addr &= 0xff00;
-			printk(KERN_INFO PFX "ACPI I/O at 0x%x\n",
-					acpi_regs_addr);
+			pr_info("ACPI I/O at 0x%x\n", acpi_regs_addr);
 		}
 
 		pci_dev_put(dev);
@@ -853,14 +842,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
 			longhaul_version = TYPE_LONGHAUL_V1;
 	}
 
-	printk(KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
+	pr_info("VIA %s CPU detected.  ", cpuname);
 	switch (longhaul_version) {
 	case TYPE_LONGHAUL_V1:
 	case TYPE_LONGHAUL_V2:
-		printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version);
+		pr_cont("Longhaul v%d supported\n", longhaul_version);
 		break;
 	case TYPE_POWERSAVER:
-		printk(KERN_CONT "Powersaver supported.\n");
+		pr_cont("Powersaver supported\n");
 		break;
 	};
 
@@ -889,15 +878,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
 	if (!(longhaul_flags & USE_ACPI_C3
 	     || longhaul_flags & USE_NORTHBRIDGE)
 	    && ((pr == NULL) || !(pr->flags.bm_control))) {
-		printk(KERN_ERR PFX
-			"No ACPI support. Unsupported northbridge.\n");
+		pr_err("No ACPI support: Unsupported northbridge\n");
 		return -ENODEV;
 	}
 
 	if (longhaul_flags & USE_NORTHBRIDGE)
-		printk(KERN_INFO PFX "Using northbridge support.\n");
+		pr_info("Using northbridge support\n");
 	if (longhaul_flags & USE_ACPI_C3)
-		printk(KERN_INFO PFX "Using ACPI support.\n");
+		pr_info("Using ACPI support\n");
 
 	ret = longhaul_get_ranges();
 	if (ret != 0)
@@ -934,20 +922,18 @@ static int __init longhaul_init(void)
 		return -ENODEV;
 
 	if (!enable) {
-		printk(KERN_ERR PFX "Option \"enable\" not set. Aborting.\n");
+		pr_err("Option \"enable\" not set - Aborting\n");
 		return -ENODEV;
 	}
 #ifdef CONFIG_SMP
 	if (num_online_cpus() > 1) {
-		printk(KERN_ERR PFX "More than 1 CPU detected, "
-				"longhaul disabled.\n");
+		pr_err("More than 1 CPU detected, longhaul disabled\n");
 		return -ENODEV;
 	}
 #endif
 #ifdef CONFIG_X86_IO_APIC
 	if (boot_cpu_has(X86_FEATURE_APIC)) {
-		printk(KERN_ERR PFX "APIC detected. Longhaul is currently "
-				"broken in this configuration.\n");
+		pr_err("APIC detected. Longhaul is currently broken in this configuration.\n");
 		return -ENODEV;
 	}
 #endif
@@ -955,7 +941,7 @@ static int __init longhaul_init(void)
 	case 6 ... 9:
 		return cpufreq_register_driver(&longhaul_driver);
 	case 10:
-		printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
+		pr_err("Use acpi-cpufreq driver for VIA C7\n");
 	default:
 		;
 	}
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index cd593c1f66dc8af8a6208933003783e0f37b7392..6bbdac1065ff544dcf7ccc1b5b67971513718288 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -10,6 +10,9 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/cpufreq.h>
 #include <linux/module.h>
 #include <linux/err.h>
@@ -76,7 +79,7 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	cpuclk = clk_get(NULL, "cpu_clk");
 	if (IS_ERR(cpuclk)) {
-		printk(KERN_ERR "cpufreq: couldn't get CPU clk\n");
+		pr_err("couldn't get CPU clk\n");
 		return PTR_ERR(cpuclk);
 	}
 
@@ -163,7 +166,7 @@ static int __init cpufreq_init(void)
 	if (ret)
 		return ret;
 
-	pr_info("cpufreq: Loongson-2F CPU frequency driver.\n");
+	pr_info("Loongson-2F CPU frequency driver\n");
 
 	cpufreq_register_notifier(&loongson2_cpufreq_notifier_block,
 				  CPUFREQ_TRANSITION_NOTIFIER);
diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c
index cc3408fc073f982110b446684cf8ed5dceb44bff..d9df89392b8439587fad331f5a728255b7f9050a 100644
--- a/drivers/cpufreq/maple-cpufreq.c
+++ b/drivers/cpufreq/maple-cpufreq.c
@@ -13,6 +13,8 @@
 
 #undef DEBUG
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/errno.h>
@@ -174,7 +176,7 @@ static int __init maple_cpufreq_init(void)
 	/* Get first CPU node */
 	cpunode = of_cpu_device_node_get(0);
 	if (cpunode == NULL) {
-		printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
+		pr_err("Can't find any CPU 0 node\n");
 		goto bail_noprops;
 	}
 
@@ -182,8 +184,7 @@ static int __init maple_cpufreq_init(void)
 	/* we actually don't care on which CPU to access PVR */
 	pvr_hi = PVR_VER(mfspr(SPRN_PVR));
 	if (pvr_hi != 0x3c && pvr_hi != 0x44) {
-		printk(KERN_ERR "cpufreq: Unsupported CPU version (%x)\n",
-				pvr_hi);
+		pr_err("Unsupported CPU version (%x)\n", pvr_hi);
 		goto bail_noprops;
 	}
 
@@ -222,8 +223,8 @@ static int __init maple_cpufreq_init(void)
 	maple_pmode_cur = -1;
 	maple_scom_switch_freq(maple_scom_query_freq());
 
-	printk(KERN_INFO "Registering Maple CPU frequency driver\n");
-	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+	pr_info("Registering Maple CPU frequency driver\n");
+	pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
 		maple_cpu_freqs[1].frequency/1000,
 		maple_cpu_freqs[0].frequency/1000,
 		maple_cpu_freqs[maple_pmode_cur].frequency/1000);
diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c
index 2058e6d292ce95fbcd6fb3099b08adf36f857cd1..6f602c7a71bd80fc6c8376574483e1bae788885f 100644
--- a/drivers/cpufreq/mt8173-cpufreq.c
+++ b/drivers/cpufreq/mt8173-cpufreq.c
@@ -59,11 +59,8 @@ static LIST_HEAD(dvfs_info_list);
 static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu)
 {
 	struct mtk_cpu_dvfs_info *info;
-	struct list_head *list;
-
-	list_for_each(list, &dvfs_info_list) {
-		info = list_entry(list, struct mtk_cpu_dvfs_info, list_head);
 
+	list_for_each_entry(info, &dvfs_info_list, list_head) {
 		if (cpumask_test_cpu(cpu, &info->cpus))
 			return info;
 	}
@@ -524,8 +521,7 @@ static struct cpufreq_driver mt8173_cpufreq_driver = {
 
 static int mt8173_cpufreq_probe(struct platform_device *pdev)
 {
-	struct mtk_cpu_dvfs_info *info;
-	struct list_head *list, *tmp;
+	struct mtk_cpu_dvfs_info *info, *tmp;
 	int cpu, ret;
 
 	for_each_possible_cpu(cpu) {
@@ -559,11 +555,9 @@ static int mt8173_cpufreq_probe(struct platform_device *pdev)
 	return 0;
 
 release_dvfs_info_list:
-	list_for_each_safe(list, tmp, &dvfs_info_list) {
-		info = list_entry(list, struct mtk_cpu_dvfs_info, list_head);
-
+	list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) {
 		mtk_cpu_dvfs_info_release(info);
-		list_del(list);
+		list_del(&info->list_head);
 	}
 
 	return ret;
diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c
new file mode 100644
index 0000000000000000000000000000000000000000..e920889b9ac29f1499120ecc39b2a429673c405a
--- /dev/null
+++ b/drivers/cpufreq/mvebu-cpufreq.c
@@ -0,0 +1,107 @@
+/*
+ * CPUFreq support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012-2016 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "mvebu-pmsu: " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/resource.h>
+
+static int __init armada_xp_pmsu_cpufreq_init(void)
+{
+	struct device_node *np;
+	struct resource res;
+	int ret, cpu;
+
+	if (!of_machine_is_compatible("marvell,armadaxp"))
+		return 0;
+
+	/*
+	 * In order to have proper cpufreq handling, we need to ensure
+	 * that the Device Tree description of the CPU clock includes
+	 * the definition of the PMU DFS registers. If not, we do not
+	 * register the clock notifier and the cpufreq driver. This
+	 * piece of code is only for compatibility with old Device
+	 * Trees.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
+	if (!np)
+		return 0;
+
+	ret = of_address_to_resource(np, 1, &res);
+	if (ret) {
+		pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
+		of_node_put(np);
+		return 0;
+	}
+
+	of_node_put(np);
+
+	/*
+	 * For each CPU, this loop registers the operating points
+	 * supported (which are the nominal CPU frequency and half of
+	 * it), and registers the clock notifier that will take care
+	 * of doing the PMSU part of a frequency transition.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev;
+		struct clk *clk;
+		int ret;
+
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("Cannot get CPU %d\n", cpu);
+			continue;
+		}
+
+		clk = clk_get(cpu_dev, 0);
+		if (IS_ERR(clk)) {
+			pr_err("Cannot get clock for CPU %d\n", cpu);
+			return PTR_ERR(clk);
+		}
+
+		/*
+		 * In case of a failure of dev_pm_opp_add(), we don't
+		 * bother with cleaning up the registered OPP (there's
+		 * no function to do so), and simply cancel the
+		 * registration of the cpufreq device.
+		 */
+		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
+		if (ret) {
+			clk_put(clk);
+			return ret;
+		}
+
+		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
+		if (ret) {
+			clk_put(clk);
+			return ret;
+		}
+
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
+						  cpumask_of(cpu_dev->id));
+		if (ret)
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
+	}
+
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	return 0;
+}
+device_initcall(armada_xp_pmsu_cpufreq_init);
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index e3866e0d5bf8ef8e9ee0bde64e1995792ada158b..cead9bec4843a18e0d564e4b5d3522d0681cd778 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -13,6 +13,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -163,13 +166,13 @@ static int omap_cpufreq_probe(struct platform_device *pdev)
 {
 	mpu_dev = get_cpu_device(0);
 	if (!mpu_dev) {
-		pr_warning("%s: unable to get the mpu device\n", __func__);
+		pr_warn("%s: unable to get the MPU device\n", __func__);
 		return -EINVAL;
 	}
 
 	mpu_reg = regulator_get(mpu_dev, "vcc");
 	if (IS_ERR(mpu_reg)) {
-		pr_warning("%s: unable to get MPU regulator\n", __func__);
+		pr_warn("%s: unable to get MPU regulator\n", __func__);
 		mpu_reg = NULL;
 	} else {
 		/* 
diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c
index 5dd95dab580d1cf30135ff39ce2cfd81d9be9b7f..fd77812313f3ecd2ef485b6298141de322ce4d80 100644
--- a/drivers/cpufreq/p4-clockmod.c
+++ b/drivers/cpufreq/p4-clockmod.c
@@ -20,6 +20,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -35,8 +37,6 @@
 
 #include "speedstep-lib.h"
 
-#define PFX	"p4-clockmod: "
-
 /*
  * Duty Cycle (3bits), note DC_DISABLE is not specified in
  * intel docs i just use it to mean disable
@@ -124,11 +124,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 {
 	if (c->x86 == 0x06) {
 		if (cpu_has(c, X86_FEATURE_EST))
-			printk_once(KERN_WARNING PFX "Warning: EST-capable "
-			       "CPU detected. The acpi-cpufreq module offers "
-			       "voltage scaling in addition to frequency "
-			       "scaling. You should use that instead of "
-			       "p4-clockmod, if possible.\n");
+			pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n");
 		switch (c->x86_model) {
 		case 0x0E: /* Core */
 		case 0x0F: /* Core Duo */
@@ -152,11 +148,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 
 	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
-		printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
-		       "The speedstep-ich or acpi cpufreq modules offer "
-		       "voltage scaling in addition of frequency scaling. "
-		       "You should use either one instead of p4-clockmod, "
-		       "if possible.\n");
+		pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n");
 		return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
 	}
 
@@ -265,8 +257,7 @@ static int __init cpufreq_p4_init(void)
 
 	ret = cpufreq_register_driver(&p4clockmod_driver);
 	if (!ret)
-		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
-				"Modulation available\n");
+		pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
 
 	return ret;
 }
diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c
index 1f49d97a70ea164737570c3480a2dcac30265788..b7b576e53e926a5c8e94bd614b3a60b4d1c6f222 100644
--- a/drivers/cpufreq/pmac32-cpufreq.c
+++ b/drivers/cpufreq/pmac32-cpufreq.c
@@ -13,6 +13,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/errno.h>
@@ -481,13 +483,13 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 		freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
 		lenp /= sizeof(u32);
 		if (freqs == NULL || lenp != 2) {
-			printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
+			pr_err("bus-frequencies incorrect or missing\n");
 			return 1;
 		}
 		ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
 						NULL);
 		if (ratio == NULL) {
-			printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
+			pr_err("processor-to-bus-ratio*2 missing\n");
 			return 1;
 		}
 
@@ -550,7 +552,7 @@ static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
 	if (volt_gpio_np)
 		voltage_gpio = read_gpio(volt_gpio_np);
 	if (!voltage_gpio){
-		printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
+		pr_err("missing cpu-vcore-select gpio\n");
 		return 1;
 	}
 
@@ -675,9 +677,9 @@ static int __init pmac_cpufreq_setup(void)
 	pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
 	ppc_proc_freq = cur_freq * 1000ul;
 
-	printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
-	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
-	       low_freq/1000, hi_freq/1000, cur_freq/1000);
+	pr_info("Registering PowerMac CPU frequency driver\n");
+	pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
+		low_freq/1000, hi_freq/1000, cur_freq/1000);
 
 	return cpufreq_register_driver(&pmac_cpufreq_driver);
 }
diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c
index 4ff86878727fc0130ebf9be394f3f832c50c315d..267e0894c62d08643d1cf34bef94fd54c95daeb8 100644
--- a/drivers/cpufreq/pmac64-cpufreq.c
+++ b/drivers/cpufreq/pmac64-cpufreq.c
@@ -12,6 +12,8 @@
 
 #undef DEBUG
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/errno.h>
@@ -138,7 +140,7 @@ static void g5_vdnap_switch_volt(int speed_mode)
 		usleep_range(1000, 1000);
 	}
 	if (done == 0)
-		printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+		pr_warn("Timeout in clock slewing !\n");
 }
 
 
@@ -266,7 +268,7 @@ static int g5_pfunc_switch_freq(int speed_mode)
 		rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
 
 	if (rc)
-		printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
+		pr_warn("pfunc switch error %d\n", rc);
 
 	/* It's an irq GPIO so we should be able to just block here,
 	 * I'll do that later after I've properly tested the IRQ code for
@@ -282,7 +284,7 @@ static int g5_pfunc_switch_freq(int speed_mode)
 		usleep_range(500, 500);
 	}
 	if (done == 0)
-		printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+		pr_warn("Timeout in clock slewing !\n");
 
 	/* If frequency is going down, last ramp the voltage */
 	if (speed_mode > g5_pmode_cur)
@@ -368,7 +370,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
 	}
 	pvr_hi = (*valp) >> 16;
 	if (pvr_hi != 0x3c && pvr_hi != 0x44) {
-		printk(KERN_ERR "cpufreq: Unsupported CPU version\n");
+		pr_err("Unsupported CPU version\n");
 		goto bail_noprops;
 	}
 
@@ -403,8 +405,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
 
 		root = of_find_node_by_path("/");
 		if (root == NULL) {
-			printk(KERN_ERR "cpufreq: Can't find root of "
-			       "device tree\n");
+			pr_err("Can't find root of device tree\n");
 			goto bail_noprops;
 		}
 		pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
@@ -412,8 +413,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
 			pmf_find_function(root, "slewing-done");
 		if (pfunc_set_vdnap0 == NULL ||
 		    pfunc_vdnap0_complete == NULL) {
-			printk(KERN_ERR "cpufreq: Can't find required "
-			       "platform function\n");
+			pr_err("Can't find required platform function\n");
 			goto bail_noprops;
 		}
 
@@ -453,10 +453,10 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
 	g5_pmode_cur = -1;
 	g5_switch_freq(g5_query_freq());
 
-	printk(KERN_INFO "Registering G5 CPU frequency driver\n");
-	printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n",
-	       freq_method, volt_method);
-	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+	pr_info("Registering G5 CPU frequency driver\n");
+	pr_info("Frequency method: %s, Voltage method: %s\n",
+		freq_method, volt_method);
+	pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
 		g5_cpu_freqs[1].frequency/1000,
 		g5_cpu_freqs[0].frequency/1000,
 		g5_cpu_freqs[g5_pmode_cur].frequency/1000);
@@ -493,7 +493,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 	if (cpuid != NULL)
 		eeprom = of_get_property(cpuid, "cpuid", NULL);
 	if (eeprom == NULL) {
-		printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
+		pr_err("Can't find cpuid EEPROM !\n");
 		rc = -ENODEV;
 		goto bail;
 	}
@@ -511,7 +511,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 		break;
 	}
 	if (hwclock == NULL) {
-		printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n");
+		pr_err("Can't find i2c clock chip !\n");
 		rc = -ENODEV;
 		goto bail;
 	}
@@ -539,7 +539,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 	/* Check we have minimum requirements */
 	if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
 	    pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
-		printk(KERN_ERR "cpufreq: Can't find platform functions !\n");
+		pr_err("Can't find platform functions !\n");
 		rc = -ENODEV;
 		goto bail;
 	}
@@ -567,7 +567,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 	/* Get max frequency from device-tree */
 	valp = of_get_property(cpunode, "clock-frequency", NULL);
 	if (!valp) {
-		printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
+		pr_err("Can't find CPU frequency !\n");
 		rc = -ENODEV;
 		goto bail;
 	}
@@ -583,8 +583,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 
 	/* Check for machines with no useful settings */
 	if (il == ih) {
-		printk(KERN_WARNING "cpufreq: No low frequency mode available"
-		       " on this model !\n");
+		pr_warn("No low frequency mode available on this model !\n");
 		rc = -ENODEV;
 		goto bail;
 	}
@@ -595,7 +594,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 
 	/* Sanity check */
 	if (min_freq >= max_freq || min_freq < 1000) {
-		printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
+		pr_err("Can't calculate low frequency !\n");
 		rc = -ENXIO;
 		goto bail;
 	}
@@ -619,10 +618,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 	g5_pmode_cur = -1;
 	g5_switch_freq(g5_query_freq());
 
-	printk(KERN_INFO "Registering G5 CPU frequency driver\n");
-	printk(KERN_INFO "Frequency method: i2c/pfunc, "
-	       "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none");
-	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+	pr_info("Registering G5 CPU frequency driver\n");
+	pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n",
+		has_volt ? "i2c/pfunc" : "none");
+	pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
 		g5_cpu_freqs[1].frequency/1000,
 		g5_cpu_freqs[0].frequency/1000,
 		g5_cpu_freqs[g5_pmode_cur].frequency/1000);
@@ -654,7 +653,7 @@ static int __init g5_cpufreq_init(void)
 	/* Get first CPU node */
 	cpunode = of_cpu_device_node_get(0);
 	if (cpunode == NULL) {
-		pr_err("cpufreq: Can't find any CPU node\n");
+		pr_err("Can't find any CPU node\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index e6f24b281e3edcb5289202e5f149e88d9e5a92e6..dedd2568e8528290f622d52149d87d36dc164100 100644
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -8,6 +8,8 @@
  *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -22,7 +24,6 @@
 #define POWERNOW_IOPORT 0xfff0          /* it doesn't matter where, as long
 					   as it is unused */
 
-#define PFX "powernow-k6: "
 static unsigned int                     busfreq;   /* FSB, in 10 kHz */
 static unsigned int                     max_multiplier;
 
@@ -141,7 +142,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
 {
 
 	if (clock_ratio[best_i].driver_data > max_multiplier) {
-		printk(KERN_ERR PFX "invalid target frequency\n");
+		pr_err("invalid target frequency\n");
 		return -EINVAL;
 	}
 
@@ -175,13 +176,14 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 				max_multiplier = param_max_multiplier;
 				goto have_max_multiplier;
 			}
-		printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
+		pr_err("invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
 		return -EINVAL;
 	}
 
 	if (!max_multiplier) {
-		printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz);
-		printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n");
+		pr_warn("unknown frequency %u, cannot determine current multiplier\n",
+			khz);
+		pr_warn("use module parameters max_multiplier and bus_frequency\n");
 		return -EOPNOTSUPP;
 	}
 
@@ -193,7 +195,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 			busfreq = param_busfreq / 10;
 			goto have_busfreq;
 		}
-		printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
+		pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
 		return -EINVAL;
 	}
 
@@ -275,7 +277,7 @@ static int __init powernow_k6_init(void)
 		return -ENODEV;
 
 	if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
-		printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n");
+		pr_info("PowerNow IOPORT region already used\n");
 		return -EIO;
 	}
 
diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c
index c1ae1999770afbeb2d754601b7e520c198ae3510..9f013ed42977ef17d5606cebb38240a4aed03b15 100644
--- a/drivers/cpufreq/powernow-k7.c
+++ b/drivers/cpufreq/powernow-k7.c
@@ -13,6 +13,8 @@
  *  - We disable half multipliers if ACPI is used on A0 stepping CPUs.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -35,9 +37,6 @@
 
 #include "powernow-k7.h"
 
-#define PFX "powernow: "
-
-
 struct psb_s {
 	u8 signature[10];
 	u8 tableversion;
@@ -127,14 +126,13 @@ static int check_powernow(void)
 	maxei = cpuid_eax(0x80000000);
 	if (maxei < 0x80000007) {	/* Any powernow info ? */
 #ifdef MODULE
-		printk(KERN_INFO PFX "No powernow capabilities detected\n");
+		pr_info("No powernow capabilities detected\n");
 #endif
 		return 0;
 	}
 
 	if ((c->x86_model == 6) && (c->x86_mask == 0)) {
-		printk(KERN_INFO PFX "K7 660[A0] core detected, "
-				"enabling errata workarounds\n");
+		pr_info("K7 660[A0] core detected, enabling errata workarounds\n");
 		have_a0 = 1;
 	}
 
@@ -144,22 +142,22 @@ static int check_powernow(void)
 	if (!(edx & (1 << 1 | 1 << 2)))
 		return 0;
 
-	printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
+	pr_info("PowerNOW! Technology present. Can scale: ");
 
 	if (edx & 1 << 1) {
-		printk("frequency");
+		pr_cont("frequency");
 		can_scale_bus = 1;
 	}
 
 	if ((edx & (1 << 1 | 1 << 2)) == 0x6)
-		printk(" and ");
+		pr_cont(" and ");
 
 	if (edx & 1 << 2) {
-		printk("voltage");
+		pr_cont("voltage");
 		can_scale_vid = 1;
 	}
 
-	printk(".\n");
+	pr_cont("\n");
 	return 1;
 }
 
@@ -427,16 +425,14 @@ static int powernow_acpi_init(void)
 err05:
 	kfree(acpi_processor_perf);
 err0:
-	printk(KERN_WARNING PFX "ACPI perflib can not be used on "
-			"this platform\n");
+	pr_warn("ACPI perflib can not be used on this platform\n");
 	acpi_processor_perf = NULL;
 	return retval;
 }
 #else
 static int powernow_acpi_init(void)
 {
-	printk(KERN_INFO PFX "no support for ACPI processor found."
-	       "  Please recompile your kernel with ACPI processor\n");
+	pr_info("no support for ACPI processor found - please recompile your kernel with ACPI processor\n");
 	return -EINVAL;
 }
 #endif
@@ -468,8 +464,7 @@ static int powernow_decode_bios(int maxfid, int startvid)
 			psb = (struct psb_s *) p;
 			pr_debug("Table version: 0x%x\n", psb->tableversion);
 			if (psb->tableversion != 0x12) {
-				printk(KERN_INFO PFX "Sorry, only v1.2 tables"
-						" supported right now\n");
+				pr_info("Sorry, only v1.2 tables supported right now\n");
 				return -ENODEV;
 			}
 
@@ -481,10 +476,8 @@ static int powernow_decode_bios(int maxfid, int startvid)
 
 			latency = psb->settlingtime;
 			if (latency < 100) {
-				printk(KERN_INFO PFX "BIOS set settling time "
-						"to %d microseconds. "
-						"Should be at least 100. "
-						"Correcting.\n", latency);
+				pr_info("BIOS set settling time to %d microseconds. Should be at least 100. Correcting.\n",
+					latency);
 				latency = 100;
 			}
 			pr_debug("Settling Time: %d microseconds.\n",
@@ -516,10 +509,9 @@ static int powernow_decode_bios(int maxfid, int startvid)
 						p += 2;
 				}
 			}
-			printk(KERN_INFO PFX "No PST tables match this cpuid "
-					"(0x%x)\n", etuple);
-			printk(KERN_INFO PFX "This is indicative of a broken "
-					"BIOS.\n");
+			pr_info("No PST tables match this cpuid (0x%x)\n",
+				etuple);
+			pr_info("This is indicative of a broken BIOS\n");
 
 			return -EINVAL;
 		}
@@ -552,7 +544,7 @@ static int fixup_sgtc(void)
 	sgtc = 100 * m * latency;
 	sgtc = sgtc / 3;
 	if (sgtc > 0xfffff) {
-		printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
+		pr_warn("SGTC too large %d\n", sgtc);
 		sgtc = 0xfffff;
 	}
 	return sgtc;
@@ -574,14 +566,10 @@ static unsigned int powernow_get(unsigned int cpu)
 
 static int acer_cpufreq_pst(const struct dmi_system_id *d)
 {
-	printk(KERN_WARNING PFX
-		"%s laptop with broken PST tables in BIOS detected.\n",
+	pr_warn("%s laptop with broken PST tables in BIOS detected\n",
 		d->ident);
-	printk(KERN_WARNING PFX
-		"You need to downgrade to 3A21 (09/09/2002), or try a newer "
-		"BIOS than 3A71 (01/20/2003)\n");
-	printk(KERN_WARNING PFX
-		"cpufreq scaling has been disabled as a result of this.\n");
+	pr_warn("You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
+	pr_warn("cpufreq scaling has been disabled as a result of this\n");
 	return 0;
 }
 
@@ -616,40 +604,38 @@ static int powernow_cpu_init(struct cpufreq_policy *policy)
 
 	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
 	if (!fsb) {
-		printk(KERN_WARNING PFX "can not determine bus frequency\n");
+		pr_warn("can not determine bus frequency\n");
 		return -EINVAL;
 	}
 	pr_debug("FSB: %3dMHz\n", fsb/1000);
 
 	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
-		printk(KERN_INFO PFX "PSB/PST known to be broken.  "
-				"Trying ACPI instead\n");
+		pr_info("PSB/PST known to be broken - trying ACPI instead\n");
 		result = powernow_acpi_init();
 	} else {
 		result = powernow_decode_bios(fidvidstatus.bits.MFID,
 				fidvidstatus.bits.SVID);
 		if (result) {
-			printk(KERN_INFO PFX "Trying ACPI perflib\n");
+			pr_info("Trying ACPI perflib\n");
 			maximum_speed = 0;
 			minimum_speed = -1;
 			latency = 0;
 			result = powernow_acpi_init();
 			if (result) {
-				printk(KERN_INFO PFX
-					"ACPI and legacy methods failed\n");
+				pr_info("ACPI and legacy methods failed\n");
 			}
 		} else {
 			/* SGTC use the bus clock as timer */
 			latency = fixup_sgtc();
-			printk(KERN_INFO PFX "SGTC: %d\n", latency);
+			pr_info("SGTC: %d\n", latency);
 		}
 	}
 
 	if (result)
 		return result;
 
-	printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
-				minimum_speed/1000, maximum_speed/1000);
+	pr_info("Minimum speed %d MHz - Maximum speed %d MHz\n",
+		minimum_speed/1000, maximum_speed/1000);
 
 	policy->cpuinfo.transition_latency =
 		cpufreq_scale(2000000UL, fsb, latency);
diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
index 39ac78c94be0f3c191aaf5868cd3c2154ab5fb59..54c45368e3f17d3333a124cbb378ccf0fefee9fe 100644
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -36,12 +36,56 @@
 #include <asm/reg.h>
 #include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */
 #include <asm/opal.h>
+#include <linux/timer.h>
 
 #define POWERNV_MAX_PSTATES	256
 #define PMSR_PSAFE_ENABLE	(1UL << 30)
 #define PMSR_SPR_EM_DISABLE	(1UL << 31)
 #define PMSR_MAX(x)		((x >> 32) & 0xFF)
 
+#define MAX_RAMP_DOWN_TIME				5120
+/*
+ * On an idle system we want the global pstate to ramp-down from max value to
+ * min over a span of ~5 secs. Also we want it to initially ramp-down slowly and
+ * then ramp-down rapidly later on.
+ *
+ * This gives a percentage rampdown for time elapsed in milliseconds.
+ * ramp_down_percentage = ((ms * ms) >> 18)
+ *			~= 3.8 * (sec * sec)
+ *
+ * At 0 ms	ramp_down_percent = 0
+ * At 5120 ms	ramp_down_percent = 100
+ */
+#define ramp_down_percent(time)		((time * time) >> 18)
+
+/* Interval after which the timer is queued to bring down global pstate */
+#define GPSTATE_TIMER_INTERVAL				2000
+
+/**
+ * struct global_pstate_info -	Per policy data structure to maintain history of
+ *				global pstates
+ * @highest_lpstate:		The local pstate from which we are ramping down
+ * @elapsed_time:		Time in ms spent in ramping down from
+ *				highest_lpstate
+ * @last_sampled_time:		Time from boot in ms when global pstates were
+ *				last set
+ * @last_lpstate,last_gpstate:	Last set values for local and global pstates
+ * @timer:			Is used for ramping down if cpu goes idle for
+ *				a long time with global pstate held high
+ * @gpstate_lock:		A spinlock to maintain synchronization between
+ *				routines called by the timer handler and
+ *				governer's target_index calls
+ */
+struct global_pstate_info {
+	int highest_lpstate;
+	unsigned int elapsed_time;
+	unsigned int last_sampled_time;
+	int last_lpstate;
+	int last_gpstate;
+	spinlock_t gpstate_lock;
+	struct timer_list timer;
+};
+
 static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
 static bool rebooting, throttled, occ_reset;
 
@@ -94,6 +138,17 @@ static struct powernv_pstate_info {
 	int nr_pstates;
 } powernv_pstate_info;
 
+static inline void reset_gpstates(struct cpufreq_policy *policy)
+{
+	struct global_pstate_info *gpstates = policy->driver_data;
+
+	gpstates->highest_lpstate = 0;
+	gpstates->elapsed_time = 0;
+	gpstates->last_sampled_time = 0;
+	gpstates->last_lpstate = 0;
+	gpstates->last_gpstate = 0;
+}
+
 /*
  * Initialize the freq table based on data obtained
  * from the firmware passed via device-tree
@@ -285,6 +340,7 @@ static inline void set_pmspr(unsigned long sprn, unsigned long val)
 struct powernv_smp_call_data {
 	unsigned int freq;
 	int pstate_id;
+	int gpstate_id;
 };
 
 /*
@@ -343,19 +399,21 @@ static unsigned int powernv_cpufreq_get(unsigned int cpu)
  * (struct powernv_smp_call_data *) and the pstate_id which needs to be set
  * on this CPU should be present in freq_data->pstate_id.
  */
-static void set_pstate(void *freq_data)
+static void set_pstate(void *data)
 {
 	unsigned long val;
-	unsigned long pstate_ul =
-		((struct powernv_smp_call_data *) freq_data)->pstate_id;
+	struct powernv_smp_call_data *freq_data = data;
+	unsigned long pstate_ul = freq_data->pstate_id;
+	unsigned long gpstate_ul = freq_data->gpstate_id;
 
 	val = get_pmspr(SPRN_PMCR);
 	val = val & 0x0000FFFFFFFFFFFFULL;
 
 	pstate_ul = pstate_ul & 0xFF;
+	gpstate_ul = gpstate_ul & 0xFF;
 
 	/* Set both global(bits 56..63) and local(bits 48..55) PStates */
-	val = val | (pstate_ul << 56) | (pstate_ul << 48);
+	val = val | (gpstate_ul << 56) | (pstate_ul << 48);
 
 	pr_debug("Setting cpu %d pmcr to %016lX\n",
 			raw_smp_processor_id(), val);
@@ -424,6 +482,111 @@ static void powernv_cpufreq_throttle_check(void *data)
 	}
 }
 
+/**
+ * calc_global_pstate - Calculate global pstate
+ * @elapsed_time:	Elapsed time in milliseconds
+ * @local_pstate:	New local pstate
+ * @highest_lpstate:	pstate from which its ramping down
+ *
+ * Finds the appropriate global pstate based on the pstate from which its
+ * ramping down and the time elapsed in ramping down. It follows a quadratic
+ * equation which ensures that it reaches ramping down to pmin in 5sec.
+ */
+static inline int calc_global_pstate(unsigned int elapsed_time,
+				     int highest_lpstate, int local_pstate)
+{
+	int pstate_diff;
+
+	/*
+	 * Using ramp_down_percent we get the percentage of rampdown
+	 * that we are expecting to be dropping. Difference between
+	 * highest_lpstate and powernv_pstate_info.min will give a absolute
+	 * number of how many pstates we will drop eventually by the end of
+	 * 5 seconds, then just scale it get the number pstates to be dropped.
+	 */
+	pstate_diff =  ((int)ramp_down_percent(elapsed_time) *
+			(highest_lpstate - powernv_pstate_info.min)) / 100;
+
+	/* Ensure that global pstate is >= to local pstate */
+	if (highest_lpstate - pstate_diff < local_pstate)
+		return local_pstate;
+	else
+		return highest_lpstate - pstate_diff;
+}
+
+static inline void  queue_gpstate_timer(struct global_pstate_info *gpstates)
+{
+	unsigned int timer_interval;
+
+	/*
+	 * Setting up timer to fire after GPSTATE_TIMER_INTERVAL ms, But
+	 * if it exceeds MAX_RAMP_DOWN_TIME ms for ramp down time.
+	 * Set timer such that it fires exactly at MAX_RAMP_DOWN_TIME
+	 * seconds of ramp down time.
+	 */
+	if ((gpstates->elapsed_time + GPSTATE_TIMER_INTERVAL)
+	     > MAX_RAMP_DOWN_TIME)
+		timer_interval = MAX_RAMP_DOWN_TIME - gpstates->elapsed_time;
+	else
+		timer_interval = GPSTATE_TIMER_INTERVAL;
+
+	mod_timer_pinned(&gpstates->timer, jiffies +
+			msecs_to_jiffies(timer_interval));
+}
+
+/**
+ * gpstate_timer_handler
+ *
+ * @data: pointer to cpufreq_policy on which timer was queued
+ *
+ * This handler brings down the global pstate closer to the local pstate
+ * according quadratic equation. Queues a new timer if it is still not equal
+ * to local pstate
+ */
+void gpstate_timer_handler(unsigned long data)
+{
+	struct cpufreq_policy *policy = (struct cpufreq_policy *)data;
+	struct global_pstate_info *gpstates = policy->driver_data;
+	int gpstate_id;
+	unsigned int time_diff = jiffies_to_msecs(jiffies)
+					- gpstates->last_sampled_time;
+	struct powernv_smp_call_data freq_data;
+
+	if (!spin_trylock(&gpstates->gpstate_lock))
+		return;
+
+	gpstates->last_sampled_time += time_diff;
+	gpstates->elapsed_time += time_diff;
+	freq_data.pstate_id = gpstates->last_lpstate;
+
+	if ((gpstates->last_gpstate == freq_data.pstate_id) ||
+	    (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME)) {
+		gpstate_id = freq_data.pstate_id;
+		reset_gpstates(policy);
+		gpstates->highest_lpstate = freq_data.pstate_id;
+	} else {
+		gpstate_id = calc_global_pstate(gpstates->elapsed_time,
+						gpstates->highest_lpstate,
+						freq_data.pstate_id);
+	}
+
+	/*
+	 * If local pstate is equal to global pstate, rampdown is over
+	 * So timer is not required to be queued.
+	 */
+	if (gpstate_id != freq_data.pstate_id)
+		queue_gpstate_timer(gpstates);
+
+	freq_data.gpstate_id = gpstate_id;
+	gpstates->last_gpstate = freq_data.gpstate_id;
+	gpstates->last_lpstate = freq_data.pstate_id;
+
+	spin_unlock(&gpstates->gpstate_lock);
+
+	/* Timer may get migrated to a different cpu on cpu hot unplug */
+	smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
+}
+
 /*
  * powernv_cpufreq_target_index: Sets the frequency corresponding to
  * the cpufreq table entry indexed by new_index on the cpus in the
@@ -433,6 +596,8 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
 					unsigned int new_index)
 {
 	struct powernv_smp_call_data freq_data;
+	unsigned int cur_msec, gpstate_id;
+	struct global_pstate_info *gpstates = policy->driver_data;
 
 	if (unlikely(rebooting) && new_index != get_nominal_index())
 		return 0;
@@ -440,28 +605,81 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
 	if (!throttled)
 		powernv_cpufreq_throttle_check(NULL);
 
+	cur_msec = jiffies_to_msecs(get_jiffies_64());
+
+	spin_lock(&gpstates->gpstate_lock);
 	freq_data.pstate_id = powernv_freqs[new_index].driver_data;
 
+	if (!gpstates->last_sampled_time) {
+		gpstate_id = freq_data.pstate_id;
+		gpstates->highest_lpstate = freq_data.pstate_id;
+		goto gpstates_done;
+	}
+
+	if (gpstates->last_gpstate > freq_data.pstate_id) {
+		gpstates->elapsed_time += cur_msec -
+						 gpstates->last_sampled_time;
+
+		/*
+		 * If its has been ramping down for more than MAX_RAMP_DOWN_TIME
+		 * we should be resetting all global pstate related data. Set it
+		 * equal to local pstate to start fresh.
+		 */
+		if (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME) {
+			reset_gpstates(policy);
+			gpstates->highest_lpstate = freq_data.pstate_id;
+			gpstate_id = freq_data.pstate_id;
+		} else {
+		/* Elaspsed_time is less than 5 seconds, continue to rampdown */
+			gpstate_id = calc_global_pstate(gpstates->elapsed_time,
+							gpstates->highest_lpstate,
+							freq_data.pstate_id);
+		}
+	} else {
+		reset_gpstates(policy);
+		gpstates->highest_lpstate = freq_data.pstate_id;
+		gpstate_id = freq_data.pstate_id;
+	}
+
+	/*
+	 * If local pstate is equal to global pstate, rampdown is over
+	 * So timer is not required to be queued.
+	 */
+	if (gpstate_id != freq_data.pstate_id)
+		queue_gpstate_timer(gpstates);
+	else
+		del_timer_sync(&gpstates->timer);
+
+gpstates_done:
+	freq_data.gpstate_id = gpstate_id;
+	gpstates->last_sampled_time = cur_msec;
+	gpstates->last_gpstate = freq_data.gpstate_id;
+	gpstates->last_lpstate = freq_data.pstate_id;
+
+	spin_unlock(&gpstates->gpstate_lock);
+
 	/*
 	 * Use smp_call_function to send IPI and execute the
 	 * mtspr on target CPU.  We could do that without IPI
 	 * if current CPU is within policy->cpus (core)
 	 */
 	smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
-
 	return 0;
 }
 
 static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
-	int base, i;
+	int base, i, ret;
+	struct kernfs_node *kn;
+	struct global_pstate_info *gpstates;
 
 	base = cpu_first_thread_sibling(policy->cpu);
 
 	for (i = 0; i < threads_per_core; i++)
 		cpumask_set_cpu(base + i, policy->cpus);
 
-	if (!policy->driver_data) {
+	kn = kernfs_find_and_get(policy->kobj.sd, throttle_attr_grp.name);
+	if (!kn) {
 		int ret;
 
 		ret = sysfs_create_group(&policy->kobj, &throttle_attr_grp);
@@ -470,13 +688,37 @@ static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
 				policy->cpu);
 			return ret;
 		}
-		/*
-		 * policy->driver_data is used as a flag for one-time
-		 * creation of throttle sysfs files.
-		 */
-		policy->driver_data = policy;
+	} else {
+		kernfs_put(kn);
 	}
-	return cpufreq_table_validate_and_show(policy, powernv_freqs);
+
+	gpstates =  kzalloc(sizeof(*gpstates), GFP_KERNEL);
+	if (!gpstates)
+		return -ENOMEM;
+
+	policy->driver_data = gpstates;
+
+	/* initialize timer */
+	init_timer_deferrable(&gpstates->timer);
+	gpstates->timer.data = (unsigned long)policy;
+	gpstates->timer.function = gpstate_timer_handler;
+	gpstates->timer.expires = jiffies +
+				msecs_to_jiffies(GPSTATE_TIMER_INTERVAL);
+	spin_lock_init(&gpstates->gpstate_lock);
+	ret = cpufreq_table_validate_and_show(policy, powernv_freqs);
+
+	if (ret < 0)
+		kfree(policy->driver_data);
+
+	return ret;
+}
+
+static int powernv_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	/* timer is deleted in cpufreq_cpu_stop() */
+	kfree(policy->driver_data);
+
+	return 0;
 }
 
 static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
@@ -604,15 +846,19 @@ static struct notifier_block powernv_cpufreq_opal_nb = {
 static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy)
 {
 	struct powernv_smp_call_data freq_data;
+	struct global_pstate_info *gpstates = policy->driver_data;
 
 	freq_data.pstate_id = powernv_pstate_info.min;
+	freq_data.gpstate_id = powernv_pstate_info.min;
 	smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1);
+	del_timer_sync(&gpstates->timer);
 }
 
 static struct cpufreq_driver powernv_cpufreq_driver = {
 	.name		= "powernv-cpufreq",
 	.flags		= CPUFREQ_CONST_LOOPS,
 	.init		= powernv_cpufreq_cpu_init,
+	.exit		= powernv_cpufreq_cpu_exit,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= powernv_cpufreq_target_index,
 	.get		= powernv_cpufreq_get,
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h
index b4c00a5a6a597a94035b9c7cdb0652c0513edf63..3eace725ccd6c6c20c8db9abfaf139b15d41c3cb 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.h
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.h
@@ -17,7 +17,7 @@ int cbe_cpufreq_get_pmode(int cpu);
 
 int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
 
-#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE)
+#if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI)
 extern bool cbe_cpufreq_has_pmi;
 #else
 #define cbe_cpufreq_has_pmi (0)
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 7969f7690498b69e04403dda45df6d11ea3b1aa1..7c4cd5c634f23006eaba8f253c04e27b93ed91e3 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
@@ -23,7 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/timer.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of_platform.h>
 
 #include <asm/processor.h>
@@ -142,15 +142,4 @@ static int __init cbe_cpufreq_pmi_init(void)
 
 	return 0;
 }
-
-static void __exit cbe_cpufreq_pmi_exit(void)
-{
-	cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
-	pmi_unregister_handler(&cbe_pmi_handler);
-}
-
-module_init(cbe_cpufreq_pmi_init);
-module_exit(cbe_cpufreq_pmi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+device_initcall(cbe_cpufreq_pmi_init);
diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c
index 46fee1539cc87d3eeada498408090a2ebad77875..ce345bf34d5ddfec4f494deb84ca35021c088c0a 100644
--- a/drivers/cpufreq/pxa2xx-cpufreq.c
+++ b/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -29,6 +29,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -186,8 +188,7 @@ static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
 
 	ret = regulator_set_voltage(vcc_core, vmin, vmax);
 	if (ret)
-		pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
-		       vmin, vmax);
+		pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax);
 	return ret;
 }
 
@@ -195,10 +196,10 @@ static void __init pxa_cpufreq_init_voltages(void)
 {
 	vcc_core = regulator_get(NULL, "vcc_core");
 	if (IS_ERR(vcc_core)) {
-		pr_info("cpufreq: Didn't find vcc_core regulator\n");
+		pr_info("Didn't find vcc_core regulator\n");
 		vcc_core = NULL;
 	} else {
-		pr_info("cpufreq: Found vcc_core regulator\n");
+		pr_info("Found vcc_core regulator\n");
 	}
 }
 #else
@@ -233,9 +234,8 @@ static void pxa27x_guess_max_freq(void)
 {
 	if (!pxa27x_maxfreq) {
 		pxa27x_maxfreq = 416000;
-		printk(KERN_INFO "PXA CPU 27x max frequency not defined "
-		       "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
-		       pxa27x_maxfreq);
+		pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
+			pxa27x_maxfreq);
 	} else {
 		pxa27x_maxfreq *= 1000;
 	}
@@ -408,7 +408,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 	 */
 	if (cpu_is_pxa25x()) {
 		find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
-		pr_info("PXA255 cpufreq using %s frequency table\n",
+		pr_info("using %s frequency table\n",
 			pxa255_turbo_table ? "turbo" : "run");
 
 		cpufreq_table_validate_and_show(policy, pxa255_freq_table);
@@ -417,7 +417,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 		cpufreq_table_validate_and_show(policy, pxa27x_freq_table);
 	}
 
-	printk(KERN_INFO "PXA CPU frequency change support initialized\n");
+	pr_info("frequency change support initialized\n");
 
 	return 0;
 }
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index b23e525a7af3fc21ad9fa85be59d3cb6a3ba27ba..53d8c3fb16f67bfc5a4cba5065c32a5503be4328 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -301,10 +301,11 @@ static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	return -ENODEV;
 }
 
-static int __exit qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
 	struct cpu_data *data = policy->driver_data;
 
+	cpufreq_cooling_unregister(data->cdev);
 	kfree(data->pclk);
 	kfree(data->table);
 	kfree(data);
@@ -333,8 +334,8 @@ static void qoriq_cpufreq_ready(struct cpufreq_policy *policy)
 		cpud->cdev = of_cpufreq_cooling_register(np,
 							 policy->related_cpus);
 
-		if (IS_ERR(cpud->cdev)) {
-			pr_err("Failed to register cooling device cpu%d: %ld\n",
+		if (IS_ERR(cpud->cdev) && PTR_ERR(cpud->cdev) != -ENOSYS) {
+			pr_err("cpu%d is not running as cooling device: %ld\n",
 					policy->cpu, PTR_ERR(cpud->cdev));
 
 			cpud->cdev = NULL;
@@ -348,7 +349,7 @@ static struct cpufreq_driver qoriq_cpufreq_driver = {
 	.name		= "qoriq_cpufreq",
 	.flags		= CPUFREQ_CONST_LOOPS,
 	.init		= qoriq_cpufreq_cpu_init,
-	.exit		= __exit_p(qoriq_cpufreq_cpu_exit),
+	.exit		= qoriq_cpufreq_cpu_exit,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= qoriq_cpufreq_target,
 	.get		= cpufreq_generic_get,
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
index eb262133fef25e31b261edeaf19725a34746759d..b04b6f02bbdcce4382bf9318b072931b43d105c9 100644
--- a/drivers/cpufreq/s3c2412-cpufreq.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -10,6 +10,8 @@
  * published by the Free Software Foundation.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -197,21 +199,20 @@ static int s3c2412_cpufreq_add(struct device *dev,
 
 	hclk = clk_get(NULL, "hclk");
 	if (IS_ERR(hclk)) {
-		printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+		pr_err("cannot find hclk clock\n");
 		return -ENOENT;
 	}
 
 	fclk = clk_get(NULL, "fclk");
 	if (IS_ERR(fclk)) {
-		printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+		pr_err("cannot find fclk clock\n");
 		goto err_fclk;
 	}
 
 	fclk_rate = clk_get_rate(fclk);
 	if (fclk_rate > 200000000) {
-		printk(KERN_INFO
-		       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
-		       __func__, fclk_rate / 1000000);
+		pr_info("fclk %ld MHz, assuming 266MHz capable part\n",
+			fclk_rate / 1000000);
 		s3c2412_cpufreq_info.max.fclk = 266000000;
 		s3c2412_cpufreq_info.max.hclk = 133000000;
 		s3c2412_cpufreq_info.max.pclk =  66000000;
@@ -219,13 +220,13 @@ static int s3c2412_cpufreq_add(struct device *dev,
 
 	armclk = clk_get(NULL, "armclk");
 	if (IS_ERR(armclk)) {
-		printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+		pr_err("cannot find arm clock\n");
 		goto err_armclk;
 	}
 
 	xtal = clk_get(NULL, "xtal");
 	if (IS_ERR(xtal)) {
-		printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+		pr_err("cannot find xtal clock\n");
 		goto err_xtal;
 	}
 
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
index 0129f5c70a610b941e14bc5f8912681b0f7bc3f7..d0d75b65ddd6df2a070b162c178322e48fbf1239 100644
--- a/drivers/cpufreq/s3c2440-cpufreq.c
+++ b/drivers/cpufreq/s3c2440-cpufreq.c
@@ -11,6 +11,8 @@
  * published by the Free Software Foundation.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -66,7 +68,7 @@ static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 		     __func__, fclk, armclk, hclk_max);
 
 	if (armclk > fclk) {
-		printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+		pr_warn("%s: armclk > fclk\n", __func__);
 		armclk = fclk;
 	}
 
@@ -273,7 +275,7 @@ static int s3c2440_cpufreq_add(struct device *dev,
 	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
 
 	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
-		printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+		pr_err("%s: failed to get clocks\n", __func__);
 		return -ENOENT;
 	}
 
diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
index 9b7b4289d66cb4c43e692410272acd74d9fd05f8..4d976e8dbb2f4135819a19bbf4ab4b510f8f3d4d 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
@@ -10,6 +10,8 @@
  * published by the Free Software Foundation.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/export.h>
 #include <linux/interrupt.h>
@@ -178,7 +180,7 @@ static int __init s3c_freq_debugfs_init(void)
 {
 	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
 	if (IS_ERR(dbgfs_root)) {
-		printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+		pr_err("%s: error creating debugfs root\n", __func__);
 		return PTR_ERR(dbgfs_root);
 	}
 
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index 68ef8fd9482fd2532762789973b8d4dfa98cfdd5..ae8eaed77b70748e961aaac9f4fb4b8e7ff6447d 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -10,6 +10,8 @@
  * published by the Free Software Foundation.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -175,7 +177,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 	cpu_new.freq.fclk = cpu_new.pll.frequency;
 
 	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
-		printk(KERN_ERR "no divisors for %d\n", target_freq);
+		pr_err("no divisors for %d\n", target_freq);
 		goto err_notpossible;
 	}
 
@@ -187,7 +189,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 
 	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
 		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
-			printk(KERN_ERR "%s: no IO timings\n", __func__);
+			pr_err("%s: no IO timings\n", __func__);
 			goto err_notpossible;
 		}
 	}
@@ -262,7 +264,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 	return 0;
 
  err_notpossible:
-	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	pr_err("no compatible settings for %d\n", target_freq);
 	return -EINVAL;
 }
 
@@ -331,7 +333,7 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy,
 						     &index);
 
 		if (ret < 0) {
-			printk(KERN_ERR "%s: no PLL available\n", __func__);
+			pr_err("%s: no PLL available\n", __func__);
 			goto err_notpossible;
 		}
 
@@ -346,7 +348,7 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy,
 	return s3c_cpufreq_settarget(policy, target_freq, pll);
 
  err_notpossible:
-	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	pr_err("no compatible settings for %d\n", target_freq);
 	return -EINVAL;
 }
 
@@ -356,7 +358,7 @@ struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
 
 	clk = clk_get(dev, name);
 	if (IS_ERR(clk))
-		printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+		pr_err("failed to get clock '%s'\n", name);
 
 	return clk;
 }
@@ -378,15 +380,16 @@ static int __init s3c_cpufreq_initclks(void)
 
 	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
 	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
-		printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+		pr_err("%s: could not get clock(s)\n", __func__);
 		return -ENOENT;
 	}
 
-	printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
-	       clk_get_rate(clk_fclk) / 1000,
-	       clk_get_rate(clk_hclk) / 1000,
-	       clk_get_rate(clk_pclk) / 1000,
-	       clk_get_rate(clk_arm) / 1000);
+	pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n",
+		__func__,
+		clk_get_rate(clk_fclk) / 1000,
+		clk_get_rate(clk_hclk) / 1000,
+		clk_get_rate(clk_pclk) / 1000,
+		clk_get_rate(clk_arm) / 1000);
 
 	return 0;
 }
@@ -424,7 +427,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
 
 	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
 	if (ret) {
-		printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+		pr_err("%s: failed to reset pll/freq\n", __func__);
 		return ret;
 	}
 
@@ -449,13 +452,12 @@ static struct cpufreq_driver s3c24xx_driver = {
 int s3c_cpufreq_register(struct s3c_cpufreq_info *info)
 {
 	if (!info || !info->name) {
-		printk(KERN_ERR "%s: failed to pass valid information\n",
-		       __func__);
+		pr_err("%s: failed to pass valid information\n", __func__);
 		return -EINVAL;
 	}
 
-	printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
-	       info->name);
+	pr_info("S3C24XX CPU Frequency driver, %s cpu support\n",
+		info->name);
 
 	/* check our driver info has valid data */
 
@@ -478,7 +480,7 @@ int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
 	struct s3c_cpufreq_board *ours;
 
 	if (!board) {
-		printk(KERN_INFO "%s: no board data\n", __func__);
+		pr_info("%s: no board data\n", __func__);
 		return -EINVAL;
 	}
 
@@ -487,7 +489,7 @@ int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
 
 	ours = kzalloc(sizeof(*ours), GFP_KERNEL);
 	if (ours == NULL) {
-		printk(KERN_ERR "%s: no memory\n", __func__);
+		pr_err("%s: no memory\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -502,15 +504,15 @@ static int __init s3c_cpufreq_auto_io(void)
 	int ret;
 
 	if (!cpu_cur.info->get_iotiming) {
-		printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+		pr_err("%s: get_iotiming undefined\n", __func__);
 		return -ENOENT;
 	}
 
-	printk(KERN_INFO "%s: working out IO settings\n", __func__);
+	pr_info("%s: working out IO settings\n", __func__);
 
 	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
 	if (ret)
-		printk(KERN_ERR "%s: failed to get timings\n", __func__);
+		pr_err("%s: failed to get timings\n", __func__);
 
 	return ret;
 }
@@ -561,7 +563,7 @@ static void s3c_cpufreq_update_loctkime(void)
 	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
 	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
 
-	printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+	pr_info("%s: new locktime is 0x%08x\n", __func__, val);
 	__raw_writel(val, S3C2410_LOCKTIME);
 }
 
@@ -580,7 +582,7 @@ static int s3c_cpufreq_build_freq(void)
 
 	ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL);
 	if (!ftab) {
-		printk(KERN_ERR "%s: no memory for tables\n", __func__);
+		pr_err("%s: no memory for tables\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -608,15 +610,14 @@ static int __init s3c_cpufreq_initcall(void)
 		if (cpu_cur.board->auto_io) {
 			ret = s3c_cpufreq_auto_io();
 			if (ret) {
-				printk(KERN_ERR "%s: failed to get io timing\n",
+				pr_err("%s: failed to get io timing\n",
 				       __func__);
 				goto out;
 			}
 		}
 
 		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
-			printk(KERN_ERR "%s: no IO support registered\n",
-			       __func__);
+			pr_err("%s: no IO support registered\n", __func__);
 			ret = -EINVAL;
 			goto out;
 		}
@@ -666,9 +667,9 @@ int s3c_plltab_register(struct cpufreq_frequency_table *plls,
 		vals += plls_no;
 		vals->frequency = CPUFREQ_TABLE_END;
 
-		printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+		pr_info("%d PLL entries\n", plls_no);
 	} else
-		printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+		pr_err("no memory for PLL tables\n");
 
 	return vals ? 0 : -ENOMEM;
 }
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index a145b319d1717a996fb193dc3f382a22030d5327..06d85917b6d5d34f5e0aa862f3afd23dbedbe75a 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -9,6 +9,8 @@
  * published by the Free Software Foundation.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -205,7 +207,7 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
 	} else if (ch == DMC1) {
 		reg = (dmc_base[1] + 0x30);
 	} else {
-		printk(KERN_ERR "Cannot find DMC port\n");
+		pr_err("Cannot find DMC port\n");
 		return;
 	}
 
@@ -534,7 +536,7 @@ static int s5pv210_cpu_init(struct cpufreq_policy *policy)
 	mem_type = check_mem_type(dmc_base[0]);
 
 	if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
-		printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
+		pr_err("CPUFreq doesn't support this memory type\n");
 		ret = -EINVAL;
 		goto out_dmc1;
 	}
@@ -635,13 +637,13 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
 
 	arm_regulator = regulator_get(NULL, "vddarm");
 	if (IS_ERR(arm_regulator)) {
-		pr_err("failed to get regulator vddarm");
+		pr_err("failed to get regulator vddarm\n");
 		return PTR_ERR(arm_regulator);
 	}
 
 	int_regulator = regulator_get(NULL, "vddint");
 	if (IS_ERR(int_regulator)) {
-		pr_err("failed to get regulator vddint");
+		pr_err("failed to get regulator vddint\n");
 		regulator_put(arm_regulator);
 		return PTR_ERR(int_regulator);
 	}
diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c
index ac84e48180148b9a383b81fe43e328e7a56cd8cb..4225501a4b785a1a9f0c76d98fca0db78fd51e41 100644
--- a/drivers/cpufreq/sc520_freq.c
+++ b/drivers/cpufreq/sc520_freq.c
@@ -13,6 +13,8 @@
  *	2005-03-30: - initial revision
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -30,8 +32,6 @@
 
 static __u8 __iomem *cpuctl;
 
-#define PFX "sc520_freq: "
-
 static struct cpufreq_frequency_table sc520_freq_table[] = {
 	{0, 0x01,	100000},
 	{0, 0x02,	133000},
@@ -44,8 +44,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
 
 	switch (clockspeed_reg & 0x03) {
 	default:
-		printk(KERN_ERR PFX "error: cpuctl register has unexpected "
-				"value %02x\n", clockspeed_reg);
+		pr_err("error: cpuctl register has unexpected value %02x\n",
+		       clockspeed_reg);
 	case 0x01:
 		return 100000;
 	case 0x02:
@@ -112,7 +112,7 @@ static int __init sc520_freq_init(void)
 
 	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
 	if (!cpuctl) {
-		printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
+		pr_err("sc520_freq: error: failed to remap memory\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
index de5e89b2eaaa3db13413eec5762620c21623738c..e8a7bf57b31b1033dc45f3141f24e23f64642c67 100644
--- a/drivers/cpufreq/scpi-cpufreq.c
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -18,6 +18,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -38,10 +39,20 @@ static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev)
 	return scpi_ops->dvfs_get_info(domain);
 }
 
-static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
+static int scpi_get_transition_latency(struct device *cpu_dev)
 {
-	int idx, ret = 0;
+	struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
+
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+	return info->latency;
+}
+
+static int scpi_init_opp_table(const struct cpumask *cpumask)
+{
+	int idx, ret;
 	struct scpi_opp *opp;
+	struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
 	struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
 
 	if (IS_ERR(info))
@@ -51,11 +62,7 @@ static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
 		return -EIO;
 
 	for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
-		if (remove)
-			dev_pm_opp_remove(cpu_dev, opp->freq);
-		else
-			ret = dev_pm_opp_add(cpu_dev, opp->freq,
-					     opp->m_volt * 1000);
+		ret = dev_pm_opp_add(cpu_dev, opp->freq, opp->m_volt * 1000);
 		if (ret) {
 			dev_warn(cpu_dev, "failed to add opp %uHz %umV\n",
 				 opp->freq, opp->m_volt);
@@ -64,33 +71,19 @@ static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
 			return ret;
 		}
 	}
-	return ret;
-}
 
-static int scpi_get_transition_latency(struct device *cpu_dev)
-{
-	struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
-
-	if (IS_ERR(info))
-		return PTR_ERR(info);
-	return info->latency;
-}
-
-static int scpi_init_opp_table(struct device *cpu_dev)
-{
-	return scpi_opp_table_ops(cpu_dev, false);
-}
-
-static void scpi_free_opp_table(struct device *cpu_dev)
-{
-	scpi_opp_table_ops(cpu_dev, true);
+	ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask);
+	if (ret)
+		dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+			__func__, ret);
+	return ret;
 }
 
 static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
 	.name	= "scpi",
 	.get_transition_latency = scpi_get_transition_latency,
 	.init_opp_table = scpi_init_opp_table,
-	.free_opp_table = scpi_free_opp_table,
+	.free_opp_table = dev_pm_opp_cpumask_remove_table,
 };
 
 static int scpi_cpufreq_probe(struct platform_device *pdev)
diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c
index 7d4a31571608524e75cfa71c35c5336dea485efa..41bc5397f4bbb3d0a08bcab5c3a75ad976680554 100644
--- a/drivers/cpufreq/speedstep-centrino.c
+++ b/drivers/cpufreq/speedstep-centrino.c
@@ -13,6 +13,8 @@
  * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -27,7 +29,6 @@
 #include <asm/cpufeature.h>
 #include <asm/cpu_device_id.h>
 
-#define PFX		"speedstep-centrino: "
 #define MAINTAINER	"linux-pm@vger.kernel.org"
 
 #define INTEL_MSR_RANGE	(0xffff)
@@ -386,8 +387,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 		/* check to see if it stuck */
 		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 		if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
-			printk(KERN_INFO PFX
-				"couldn't enable Enhanced SpeedStep\n");
+			pr_info("couldn't enable Enhanced SpeedStep\n");
 			return -ENODEV;
 		}
 	}
diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c
index 37555c6b86a7cf843f04187a24c86dfe99aa8d42..b86953a3ddc4aea6e9bedecdd23766c975f87364 100644
--- a/drivers/cpufreq/speedstep-ich.c
+++ b/drivers/cpufreq/speedstep-ich.c
@@ -18,6 +18,8 @@
  *                        SPEEDSTEP - DEFINITIONS                    *
  *********************************************************************/
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -68,13 +70,13 @@ static int speedstep_find_register(void)
 	/* get PMBASE */
 	pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
 	if (!(pmbase & 0x01)) {
-		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+		pr_err("could not find speedstep register\n");
 		return -ENODEV;
 	}
 
 	pmbase &= 0xFFFFFFFE;
 	if (!pmbase) {
-		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+		pr_err("could not find speedstep register\n");
 		return -ENODEV;
 	}
 
@@ -136,7 +138,7 @@ static void speedstep_set_state(unsigned int state)
 		pr_debug("change to %u MHz succeeded\n",
 			speedstep_get_frequency(speedstep_processor) / 1000);
 	else
-		printk(KERN_ERR "cpufreq: change failed - I/O error\n");
+		pr_err("change failed - I/O error\n");
 
 	return;
 }
diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c
index 15d3214aaa00b466018836e53f83c02fa90d2895..1b8062182c813b359200070306a228d0c0cef18b 100644
--- a/drivers/cpufreq/speedstep-lib.c
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -8,6 +8,8 @@
  *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -153,7 +155,7 @@ static unsigned int pentium_core_get_frequency(void)
 		fsb = 333333;
 		break;
 	default:
-		printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
+		pr_err("PCORE - MSR_FSB_FREQ undefined value\n");
 	}
 
 	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
@@ -453,11 +455,8 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 		 */
 		if (*transition_latency > 10000000 ||
 		    *transition_latency < 50000) {
-			printk(KERN_WARNING PFX "frequency transition "
-					"measured seems out of range (%u "
-					"nSec), falling back to a safe one of"
-					"%u nSec.\n",
-					*transition_latency, 500000);
+			pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n",
+				*transition_latency, 500000);
 			*transition_latency = 500000;
 		}
 	}
diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
index 819229e824fb69dde06d44d8726d95b5697d29da..770a9ae1999a96a7fa02f747662a56b173532e5f 100644
--- a/drivers/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -12,6 +12,8 @@
  *                        SPEEDSTEP - DEFINITIONS                    *
  *********************************************************************/
 
+#define pr_fmt(fmt) "cpufreq: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -204,9 +206,8 @@ static void speedstep_set_state(unsigned int state)
 			(speedstep_freqs[new_state].frequency / 1000),
 			retry, result);
 	else
-		printk(KERN_ERR "cpufreq: change to state %u "
-			"failed with new_state %u and result %u\n",
-			state, new_state, result);
+		pr_err("change to state %u failed with new_state %u and result %u\n",
+		       state, new_state, result);
 
 	return;
 }
diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
index 20bcceb58ccc04f4963c1a2686fb0c18ee6fcc5b..43530254201a8b3a5f98fdcb032ea6c3b635bb96 100644
--- a/drivers/cpufreq/tegra124-cpufreq.c
+++ b/drivers/cpufreq/tegra124-cpufreq.c
@@ -14,7 +14,6 @@
 #define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
 
 #include <linux/clk.h>
-#include <linux/cpufreq-dt.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -69,10 +68,6 @@ static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv)
 	clk_set_parent(priv->cpu_clk, priv->pllx_clk);
 }
 
-static struct cpufreq_dt_platform_data cpufreq_dt_pd = {
-	.independent_clocks = false,
-};
-
 static int tegra124_cpufreq_probe(struct platform_device *pdev)
 {
 	struct tegra124_cpufreq_priv *priv;
@@ -129,8 +124,6 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
 
 	cpufreq_dt_devinfo.name = "cpufreq-dt";
 	cpufreq_dt_devinfo.parent = &pdev->dev;
-	cpufreq_dt_devinfo.data = &cpufreq_dt_pd;
-	cpufreq_dt_devinfo.size_data = sizeof(cpufreq_dt_pd);
 
 	priv->cpufreq_dt_pdev =
 		platform_device_register_full(&cpufreq_dt_devinfo);
diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
index 433e93fd4900a7bccd474b04bf15889ff831f4bc..87e5bdc5ec74cb4e03be68ca4e7134e297bbfaad 100644
--- a/drivers/cpufreq/vexpress-spc-cpufreq.c
+++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -18,6 +18,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -26,8 +27,9 @@
 
 #include "arm_big_little.h"
 
-static int ve_spc_init_opp_table(struct device *cpu_dev)
+static int ve_spc_init_opp_table(const struct cpumask *cpumask)
 {
+	struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
 	/*
 	 * platform specific SPC code must initialise the opp table
 	 * so just check if the OPP count is non-zero
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index f996efc56605a3d4739ae0bcac83099fd65b0751..2b8e6ce62e816eb3887b983d47a8a2a4c96929e1 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -173,7 +173,7 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
 
 	struct cpuidle_state *target_state = &drv->states[index];
 	bool broadcast = !!(target_state->flags & CPUIDLE_FLAG_TIMER_STOP);
-	ktime_t time_start, time_end;
+	u64 time_start, time_end;
 	s64 diff;
 
 	/*
@@ -195,13 +195,13 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
 	sched_idle_set_state(target_state);
 
 	trace_cpu_idle_rcuidle(index, dev->cpu);
-	time_start = ktime_get();
+	time_start = local_clock();
 
 	stop_critical_timings();
 	entered_state = target_state->enter(dev, drv, index);
 	start_critical_timings();
 
-	time_end = ktime_get();
+	time_end = local_clock();
 	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
 
 	/* The cpu is no longer idle or about to enter idle. */
@@ -217,7 +217,11 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
 	if (!cpuidle_state_is_coupled(drv, entered_state))
 		local_irq_enable();
 
-	diff = ktime_to_us(ktime_sub(time_end, time_start));
+	/*
+	 * local_clock() returns the time in nanosecond, let's shift
+	 * by 10 (divide by 1024) to have microsecond based time.
+	 */
+	diff = (time_end - time_start) >> 10;
 	if (diff > INT_MAX)
 		diff = INT_MAX;
 
@@ -433,6 +437,8 @@ static void __cpuidle_unregister_device(struct cpuidle_device *dev)
 	list_del(&dev->device_list);
 	per_cpu(cpuidle_devices, dev->cpu) = NULL;
 	module_put(drv->owner);
+
+	dev->registered = 0;
 }
 
 static void __cpuidle_device_init(struct cpuidle_device *dev)
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 4de78c552251a5a58803f74957e82f41a76307e8..78dac0e9da1119be74ac5607114f58f0691799b1 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -64,30 +64,32 @@ config DEVFREQ_GOV_USERSPACE
 	  Otherwise, the governor does not change the frequency
 	  given at the initialization.
 
+config DEVFREQ_GOV_PASSIVE
+	tristate "Passive"
+	help
+	  Sets the frequency based on the frequency of its parent devfreq
+	  device. This governor does not change the frequency by itself
+	  through sysfs entries. The passive governor recommends that
+	  devfreq device uses the OPP table to get the frequency/voltage.
+
 comment "DEVFREQ Drivers"
 
-config ARM_EXYNOS4_BUS_DEVFREQ
-	bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
-	depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
+config ARM_EXYNOS_BUS_DEVFREQ
+	bool "ARM EXYNOS Generic Memory Bus DEVFREQ Driver"
+	depends on ARCH_EXYNOS
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select DEVFREQ_GOV_PASSIVE
+	select DEVFREQ_EVENT_EXYNOS_PPMU
+	select PM_DEVFREQ_EVENT
 	select PM_OPP
 	help
-	  This adds the DEVFREQ driver for Exynos4210 memory bus (vdd_int)
-	  and Exynos4212/4412 memory interface and bus (vdd_mif + vdd_int).
-	  It reads PPMU counters of memory controllers and adjusts
-	  the operating frequencies and voltages with OPP support.
+	  This adds the common DEVFREQ driver for Exynos Memory bus. Exynos
+	  Memory bus has one more group of memory bus (e.g, MIF and INT block).
+	  Each memory bus group could contain many memoby bus block. It reads
+	  PPMU counters of memory controllers by using DEVFREQ-event device
+	  and adjusts the operating frequencies and voltages with OPP support.
 	  This does not yet operate with optimal voltages.
 
-config ARM_EXYNOS5_BUS_DEVFREQ
-	tristate "ARM Exynos5250 Bus DEVFREQ Driver"
-	depends on SOC_EXYNOS5250
-	select DEVFREQ_GOV_SIMPLE_ONDEMAND
-	select PM_OPP
-	help
-	  This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int).
-	  It reads PPMU counters of memory controllers and adjusts the
-	  operating frequencies and voltages with OPP support.
-
 config ARM_TEGRA_DEVFREQ
        tristate "Tegra DEVFREQ Driver"
        depends on ARCH_TEGRA_124_SOC
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 5134f9ee983d2308105f50065e4165aa15e01059..09f11d9d40d593f3f6151c26892be6842e63916f 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -4,10 +4,10 @@ obj-$(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)	+= governor_simpleondemand.o
 obj-$(CONFIG_DEVFREQ_GOV_PERFORMANCE)	+= governor_performance.o
 obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE)	+= governor_powersave.o
 obj-$(CONFIG_DEVFREQ_GOV_USERSPACE)	+= governor_userspace.o
+obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 
 # DEVFREQ Drivers
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ)	+= exynos/
-obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ)	+= exynos/
+obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra-devfreq.o
 
 # DEVFREQ Event Drivers
diff --git a/drivers/devfreq/devfreq-event.c b/drivers/devfreq/devfreq-event.c
index 38bf144ca1479840947b0f3321f7fe0e0ea49042..39b048eda2ce40a79772c585cf5f953be1e9ac71 100644
--- a/drivers/devfreq/devfreq-event.c
+++ b/drivers/devfreq/devfreq-event.c
@@ -234,6 +234,11 @@ struct devfreq_event_dev *devfreq_event_get_edev_by_phandle(struct device *dev,
 		return ERR_PTR(-ENODEV);
 
 	mutex_lock(&devfreq_event_list_lock);
+	list_for_each_entry(edev, &devfreq_event_list, node) {
+		if (edev->dev.parent && edev->dev.parent->of_node == node)
+			goto out;
+	}
+
 	list_for_each_entry(edev, &devfreq_event_list, node) {
 		if (!strcmp(edev->desc->name, node->name))
 			goto out;
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 984c5e9e7bdd5bd72f66d0706661435f17b20b85..1d6c803804d5f44a3cd5ad4b6b90ee60ae6b407d 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -25,6 +25,7 @@
 #include <linux/list.h>
 #include <linux/printk.h>
 #include <linux/hrtimer.h>
+#include <linux/of.h>
 #include "governor.h"
 
 static struct class *devfreq_class;
@@ -188,6 +189,29 @@ static struct devfreq_governor *find_devfreq_governor(const char *name)
 	return ERR_PTR(-ENODEV);
 }
 
+static int devfreq_notify_transition(struct devfreq *devfreq,
+		struct devfreq_freqs *freqs, unsigned int state)
+{
+	if (!devfreq)
+		return -EINVAL;
+
+	switch (state) {
+	case DEVFREQ_PRECHANGE:
+		srcu_notifier_call_chain(&devfreq->transition_notifier_list,
+				DEVFREQ_PRECHANGE, freqs);
+		break;
+
+	case DEVFREQ_POSTCHANGE:
+		srcu_notifier_call_chain(&devfreq->transition_notifier_list,
+				DEVFREQ_POSTCHANGE, freqs);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* Load monitoring helper functions for governors use */
 
 /**
@@ -199,7 +223,8 @@ static struct devfreq_governor *find_devfreq_governor(const char *name)
  */
 int update_devfreq(struct devfreq *devfreq)
 {
-	unsigned long freq;
+	struct devfreq_freqs freqs;
+	unsigned long freq, cur_freq;
 	int err = 0;
 	u32 flags = 0;
 
@@ -233,10 +258,22 @@ int update_devfreq(struct devfreq *devfreq)
 		flags |= DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use LUB */
 	}
 
+	if (devfreq->profile->get_cur_freq)
+		devfreq->profile->get_cur_freq(devfreq->dev.parent, &cur_freq);
+	else
+		cur_freq = devfreq->previous_freq;
+
+	freqs.old = cur_freq;
+	freqs.new = freq;
+	devfreq_notify_transition(devfreq, &freqs, DEVFREQ_PRECHANGE);
+
 	err = devfreq->profile->target(devfreq->dev.parent, &freq, flags);
 	if (err)
 		return err;
 
+	freqs.new = freq;
+	devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE);
+
 	if (devfreq->profile->freq_table)
 		if (devfreq_update_status(devfreq, freq))
 			dev_err(&devfreq->dev,
@@ -541,6 +578,8 @@ struct devfreq *devfreq_add_device(struct device *dev,
 		goto err_out;
 	}
 
+	srcu_init_notifier_head(&devfreq->transition_notifier_list);
+
 	mutex_unlock(&devfreq->lock);
 
 	mutex_lock(&devfreq_list_lock);
@@ -639,6 +678,49 @@ struct devfreq *devm_devfreq_add_device(struct device *dev,
 }
 EXPORT_SYMBOL(devm_devfreq_add_device);
 
+#ifdef CONFIG_OF
+/*
+ * devfreq_get_devfreq_by_phandle - Get the devfreq device from devicetree
+ * @dev - instance to the given device
+ * @index - index into list of devfreq
+ *
+ * return the instance of devfreq device
+ */
+struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index)
+{
+	struct device_node *node;
+	struct devfreq *devfreq;
+
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
+	if (!dev->of_node)
+		return ERR_PTR(-EINVAL);
+
+	node = of_parse_phandle(dev->of_node, "devfreq", index);
+	if (!node)
+		return ERR_PTR(-ENODEV);
+
+	mutex_lock(&devfreq_list_lock);
+	list_for_each_entry(devfreq, &devfreq_list, node) {
+		if (devfreq->dev.parent
+			&& devfreq->dev.parent->of_node == node) {
+			mutex_unlock(&devfreq_list_lock);
+			return devfreq;
+		}
+	}
+	mutex_unlock(&devfreq_list_lock);
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+#else
+struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif /* CONFIG_OF */
+EXPORT_SYMBOL_GPL(devfreq_get_devfreq_by_phandle);
+
 /**
  * devm_devfreq_remove_device() - Resource-managed devfreq_remove_device()
  * @dev:	the device to add devfreq feature.
@@ -1266,6 +1348,129 @@ void devm_devfreq_unregister_opp_notifier(struct device *dev,
 }
 EXPORT_SYMBOL(devm_devfreq_unregister_opp_notifier);
 
+/**
+ * devfreq_register_notifier() - Register a driver with devfreq
+ * @devfreq:	The devfreq object.
+ * @nb:		The notifier block to register.
+ * @list:	DEVFREQ_TRANSITION_NOTIFIER.
+ */
+int devfreq_register_notifier(struct devfreq *devfreq,
+				struct notifier_block *nb,
+				unsigned int list)
+{
+	int ret = 0;
+
+	if (!devfreq)
+		return -EINVAL;
+
+	switch (list) {
+	case DEVFREQ_TRANSITION_NOTIFIER:
+		ret = srcu_notifier_chain_register(
+				&devfreq->transition_notifier_list, nb);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(devfreq_register_notifier);
+
+/*
+ * devfreq_unregister_notifier() - Unregister a driver with devfreq
+ * @devfreq:	The devfreq object.
+ * @nb:		The notifier block to be unregistered.
+ * @list:	DEVFREQ_TRANSITION_NOTIFIER.
+ */
+int devfreq_unregister_notifier(struct devfreq *devfreq,
+				struct notifier_block *nb,
+				unsigned int list)
+{
+	int ret = 0;
+
+	if (!devfreq)
+		return -EINVAL;
+
+	switch (list) {
+	case DEVFREQ_TRANSITION_NOTIFIER:
+		ret = srcu_notifier_chain_unregister(
+				&devfreq->transition_notifier_list, nb);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(devfreq_unregister_notifier);
+
+struct devfreq_notifier_devres {
+	struct devfreq *devfreq;
+	struct notifier_block *nb;
+	unsigned int list;
+};
+
+static void devm_devfreq_notifier_release(struct device *dev, void *res)
+{
+	struct devfreq_notifier_devres *this = res;
+
+	devfreq_unregister_notifier(this->devfreq, this->nb, this->list);
+}
+
+/**
+ * devm_devfreq_register_notifier()
+	- Resource-managed devfreq_register_notifier()
+ * @dev:	The devfreq user device. (parent of devfreq)
+ * @devfreq:	The devfreq object.
+ * @nb:		The notifier block to be unregistered.
+ * @list:	DEVFREQ_TRANSITION_NOTIFIER.
+ */
+int devm_devfreq_register_notifier(struct device *dev,
+				struct devfreq *devfreq,
+				struct notifier_block *nb,
+				unsigned int list)
+{
+	struct devfreq_notifier_devres *ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_devfreq_notifier_release, sizeof(*ptr),
+				GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = devfreq_register_notifier(devfreq, nb, list);
+	if (ret) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	ptr->devfreq = devfreq;
+	ptr->nb = nb;
+	ptr->list = list;
+	devres_add(dev, ptr);
+
+	return 0;
+}
+EXPORT_SYMBOL(devm_devfreq_register_notifier);
+
+/**
+ * devm_devfreq_unregister_notifier()
+	- Resource-managed devfreq_unregister_notifier()
+ * @dev:	The devfreq user device. (parent of devfreq)
+ * @devfreq:	The devfreq object.
+ * @nb:		The notifier block to be unregistered.
+ * @list:	DEVFREQ_TRANSITION_NOTIFIER.
+ */
+void devm_devfreq_unregister_notifier(struct device *dev,
+				struct devfreq *devfreq,
+				struct notifier_block *nb,
+				unsigned int list)
+{
+	WARN_ON(devres_release(dev, devm_devfreq_notifier_release,
+			       devm_devfreq_dev_match, devfreq));
+}
+EXPORT_SYMBOL(devm_devfreq_unregister_notifier);
+
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
 MODULE_DESCRIPTION("devfreq class support");
 MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/event/Kconfig b/drivers/devfreq/event/Kconfig
index a11720affc319f620d09daffec60a337725e6ddd..1e8b4f469f38d08b45dd320da550b75be2de9632 100644
--- a/drivers/devfreq/event/Kconfig
+++ b/drivers/devfreq/event/Kconfig
@@ -13,6 +13,14 @@ menuconfig PM_DEVFREQ_EVENT
 
 if PM_DEVFREQ_EVENT
 
+config DEVFREQ_EVENT_EXYNOS_NOCP
+	bool "EXYNOS NoC (Network On Chip) Probe DEVFREQ event Driver"
+	depends on ARCH_EXYNOS
+	select PM_OPP
+	help
+	  This add the devfreq-event driver for Exynos SoC. It provides NoC
+	  (Network on Chip) Probe counters to measure the bandwidth of AXI bus.
+
 config DEVFREQ_EVENT_EXYNOS_PPMU
 	bool "EXYNOS PPMU (Platform Performance Monitoring Unit) DEVFREQ event Driver"
 	depends on ARCH_EXYNOS
diff --git a/drivers/devfreq/event/Makefile b/drivers/devfreq/event/Makefile
index be146ead79cfb638d1207ab9901e0aab5d94e096..3d6afd3522535905e417e7d12e23f8c93efae3fd 100644
--- a/drivers/devfreq/event/Makefile
+++ b/drivers/devfreq/event/Makefile
@@ -1,2 +1,4 @@
 # Exynos DEVFREQ Event Drivers
+
+obj-$(CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP) += exynos-nocp.o
 obj-$(CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU) += exynos-ppmu.o
diff --git a/drivers/devfreq/event/exynos-nocp.c b/drivers/devfreq/event/exynos-nocp.c
new file mode 100644
index 0000000000000000000000000000000000000000..6b6a5f310486feda5c9b323a7129819dc163b7f3
--- /dev/null
+++ b/drivers/devfreq/event/exynos-nocp.c
@@ -0,0 +1,304 @@
+/*
+ * exynos-nocp.c - EXYNOS NoC (Network On Chip) Probe support
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Author : Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/devfreq-event.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "exynos-nocp.h"
+
+struct exynos_nocp {
+	struct devfreq_event_dev *edev;
+	struct devfreq_event_desc desc;
+
+	struct device *dev;
+
+	struct regmap *regmap;
+	struct clk *clk;
+};
+
+/*
+ * The devfreq-event ops structure for nocp probe.
+ */
+static int exynos_nocp_set_event(struct devfreq_event_dev *edev)
+{
+	struct exynos_nocp *nocp = devfreq_event_get_drvdata(edev);
+	int ret;
+
+	/* Disable NoC probe */
+	ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL,
+				NOCP_MAIN_CTL_STATEN_MASK, 0);
+	if (ret < 0) {
+		dev_err(nocp->dev, "failed to disable the NoC probe device\n");
+		return ret;
+	}
+
+	/* Set a statistics dump period to 0 */
+	ret = regmap_write(nocp->regmap, NOCP_STAT_PERIOD, 0x0);
+	if (ret < 0)
+		goto out;
+
+	/* Set the IntEvent fields of *_SRC */
+	ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_0_SRC,
+				NOCP_CNT_SRC_INTEVENT_MASK,
+				NOCP_CNT_SRC_INTEVENT_BYTE_MASK);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_1_SRC,
+				NOCP_CNT_SRC_INTEVENT_MASK,
+				NOCP_CNT_SRC_INTEVENT_CHAIN_MASK);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_2_SRC,
+				NOCP_CNT_SRC_INTEVENT_MASK,
+				NOCP_CNT_SRC_INTEVENT_CYCLE_MASK);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_3_SRC,
+				NOCP_CNT_SRC_INTEVENT_MASK,
+				NOCP_CNT_SRC_INTEVENT_CHAIN_MASK);
+	if (ret < 0)
+		goto out;
+
+
+	/* Set an alarm with a max/min value of 0 to generate StatALARM */
+	ret = regmap_write(nocp->regmap, NOCP_STAT_ALARM_MIN, 0x0);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_write(nocp->regmap, NOCP_STAT_ALARM_MAX, 0x0);
+	if (ret < 0)
+		goto out;
+
+	/* Set AlarmMode */
+	ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_0_ALARM_MODE,
+				NOCP_CNT_ALARM_MODE_MASK,
+				NOCP_CNT_ALARM_MODE_MIN_MAX_MASK);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_1_ALARM_MODE,
+				NOCP_CNT_ALARM_MODE_MASK,
+				NOCP_CNT_ALARM_MODE_MIN_MAX_MASK);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_2_ALARM_MODE,
+				NOCP_CNT_ALARM_MODE_MASK,
+				NOCP_CNT_ALARM_MODE_MIN_MAX_MASK);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_3_ALARM_MODE,
+				NOCP_CNT_ALARM_MODE_MASK,
+				NOCP_CNT_ALARM_MODE_MIN_MAX_MASK);
+	if (ret < 0)
+		goto out;
+
+	/* Enable the measurements by setting AlarmEn and StatEn */
+	ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL,
+			NOCP_MAIN_CTL_STATEN_MASK | NOCP_MAIN_CTL_ALARMEN_MASK,
+			NOCP_MAIN_CTL_STATEN_MASK | NOCP_MAIN_CTL_ALARMEN_MASK);
+	if (ret < 0)
+		goto out;
+
+	/* Set GlobalEN */
+	ret = regmap_update_bits(nocp->regmap, NOCP_CFG_CTL,
+				NOCP_CFG_CTL_GLOBALEN_MASK,
+				NOCP_CFG_CTL_GLOBALEN_MASK);
+	if (ret < 0)
+		goto out;
+
+	/* Enable NoC probe */
+	ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL,
+				NOCP_MAIN_CTL_STATEN_MASK,
+				NOCP_MAIN_CTL_STATEN_MASK);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+
+out:
+	/* Reset NoC probe */
+	if (regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL,
+				NOCP_MAIN_CTL_STATEN_MASK, 0)) {
+		dev_err(nocp->dev, "Failed to reset NoC probe device\n");
+	}
+
+	return ret;
+}
+
+static int exynos_nocp_get_event(struct devfreq_event_dev *edev,
+				struct devfreq_event_data *edata)
+{
+	struct exynos_nocp *nocp = devfreq_event_get_drvdata(edev);
+	unsigned int counter[4];
+	int ret;
+
+	/* Read cycle count */
+	ret = regmap_read(nocp->regmap, NOCP_COUNTERS_0_VAL, &counter[0]);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_read(nocp->regmap, NOCP_COUNTERS_1_VAL, &counter[1]);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_read(nocp->regmap, NOCP_COUNTERS_2_VAL, &counter[2]);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_read(nocp->regmap, NOCP_COUNTERS_3_VAL, &counter[3]);
+	if (ret < 0)
+		goto out;
+
+	edata->load_count = ((counter[1] << 16) | counter[0]);
+	edata->total_count = ((counter[3] << 16) | counter[2]);
+
+	dev_dbg(&edev->dev, "%s (event: %ld/%ld)\n", edev->desc->name,
+					edata->load_count, edata->total_count);
+
+	return 0;
+
+out:
+	edata->load_count = 0;
+	edata->total_count = 0;
+
+	dev_err(nocp->dev, "Failed to read the counter of NoC probe device\n");
+
+	return ret;
+}
+
+static const struct devfreq_event_ops exynos_nocp_ops = {
+	.set_event = exynos_nocp_set_event,
+	.get_event = exynos_nocp_get_event,
+};
+
+static const struct of_device_id exynos_nocp_id_match[] = {
+	{ .compatible = "samsung,exynos5420-nocp", },
+	{ /* sentinel */ },
+};
+
+static struct regmap_config exynos_nocp_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = NOCP_COUNTERS_3_VAL,
+};
+
+static int exynos_nocp_parse_dt(struct platform_device *pdev,
+				struct exynos_nocp *nocp)
+{
+	struct device *dev = nocp->dev;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	void __iomem *base;
+
+	if (!np) {
+		dev_err(dev, "failed to find devicetree node\n");
+		return -EINVAL;
+	}
+
+	nocp->clk = devm_clk_get(dev, "nocp");
+	if (IS_ERR(nocp->clk))
+		nocp->clk = NULL;
+
+	/* Maps the memory mapped IO to control nocp register */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (IS_ERR(res))
+		return PTR_ERR(res);
+
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	exynos_nocp_regmap_config.max_register = resource_size(res) - 4;
+
+	nocp->regmap = devm_regmap_init_mmio(dev, base,
+					&exynos_nocp_regmap_config);
+	if (IS_ERR(nocp->regmap)) {
+		dev_err(dev, "failed to initialize regmap\n");
+		return PTR_ERR(nocp->regmap);
+	}
+
+	return 0;
+}
+
+static int exynos_nocp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct exynos_nocp *nocp;
+	int ret;
+
+	nocp = devm_kzalloc(&pdev->dev, sizeof(*nocp), GFP_KERNEL);
+	if (!nocp)
+		return -ENOMEM;
+
+	nocp->dev = &pdev->dev;
+
+	/* Parse dt data to get resource */
+	ret = exynos_nocp_parse_dt(pdev, nocp);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"failed to parse devicetree for resource\n");
+		return ret;
+	}
+
+	/* Add devfreq-event device to measure the bandwidth of NoC */
+	nocp->desc.ops = &exynos_nocp_ops;
+	nocp->desc.driver_data = nocp;
+	nocp->desc.name = np->full_name;
+	nocp->edev = devm_devfreq_event_add_edev(&pdev->dev, &nocp->desc);
+	if (IS_ERR(nocp->edev)) {
+		dev_err(&pdev->dev,
+			"failed to add devfreq-event device\n");
+		return PTR_ERR(nocp->edev);
+	}
+	platform_set_drvdata(pdev, nocp);
+
+	clk_prepare_enable(nocp->clk);
+
+	pr_info("exynos-nocp: new NoC Probe device registered: %s\n",
+			dev_name(dev));
+
+	return 0;
+}
+
+static int exynos_nocp_remove(struct platform_device *pdev)
+{
+	struct exynos_nocp *nocp = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(nocp->clk);
+
+	return 0;
+}
+
+static struct platform_driver exynos_nocp_driver = {
+	.probe	= exynos_nocp_probe,
+	.remove	= exynos_nocp_remove,
+	.driver = {
+		.name	= "exynos-nocp",
+		.of_match_table = exynos_nocp_id_match,
+	},
+};
+module_platform_driver(exynos_nocp_driver);
+
+MODULE_DESCRIPTION("Exynos NoC (Network on Chip) Probe driver");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/event/exynos-nocp.h b/drivers/devfreq/event/exynos-nocp.h
new file mode 100644
index 0000000000000000000000000000000000000000..28564db0edb869363aa54bf1276a50dd5153e698
--- /dev/null
+++ b/drivers/devfreq/event/exynos-nocp.h
@@ -0,0 +1,78 @@
+/*
+ * exynos-nocp.h - EXYNOS NoC (Network on Chip) Probe header file
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Author : Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __EXYNOS_NOCP_H__
+#define __EXYNOS_NOCP_H__
+
+enum nocp_reg {
+	NOCP_ID_REVISION_ID		= 0x04,
+	NOCP_MAIN_CTL			= 0x08,
+	NOCP_CFG_CTL			= 0x0C,
+
+	NOCP_STAT_PERIOD		= 0x24,
+	NOCP_STAT_GO			= 0x28,
+	NOCP_STAT_ALARM_MIN		= 0x2C,
+	NOCP_STAT_ALARM_MAX		= 0x30,
+	NOCP_STAT_ALARM_STATUS		= 0x34,
+	NOCP_STAT_ALARM_CLR		= 0x38,
+
+	NOCP_COUNTERS_0_SRC		= 0x138,
+	NOCP_COUNTERS_0_ALARM_MODE	= 0x13C,
+	NOCP_COUNTERS_0_VAL		= 0x140,
+
+	NOCP_COUNTERS_1_SRC		= 0x14C,
+	NOCP_COUNTERS_1_ALARM_MODE	= 0x150,
+	NOCP_COUNTERS_1_VAL		= 0x154,
+
+	NOCP_COUNTERS_2_SRC		= 0x160,
+	NOCP_COUNTERS_2_ALARM_MODE	= 0x164,
+	NOCP_COUNTERS_2_VAL		= 0x168,
+
+	NOCP_COUNTERS_3_SRC		= 0x174,
+	NOCP_COUNTERS_3_ALARM_MODE	= 0x178,
+	NOCP_COUNTERS_3_VAL		= 0x17C,
+};
+
+/* NOCP_MAIN_CTL register */
+#define NOCP_MAIN_CTL_ERREN_MASK		BIT(0)
+#define NOCP_MAIN_CTL_TRACEEN_MASK		BIT(1)
+#define NOCP_MAIN_CTL_PAYLOADEN_MASK		BIT(2)
+#define NOCP_MAIN_CTL_STATEN_MASK		BIT(3)
+#define NOCP_MAIN_CTL_ALARMEN_MASK		BIT(4)
+#define NOCP_MAIN_CTL_STATCONDDUMP_MASK	BIT(5)
+#define NOCP_MAIN_CTL_INTRUSIVEMODE_MASK	BIT(6)
+
+/* NOCP_CFG_CTL register */
+#define NOCP_CFG_CTL_GLOBALEN_MASK		BIT(0)
+#define NOCP_CFG_CTL_ACTIVE_MASK		BIT(1)
+
+/* NOCP_COUNTERS_x_SRC register */
+#define NOCP_CNT_SRC_INTEVENT_SHIFT		0
+#define NOCP_CNT_SRC_INTEVENT_MASK		(0x1F << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_OFF_MASK		(0x0 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_CYCLE_MASK	(0x1 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_IDLE_MASK		(0x2 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_XFER_MASK		(0x3 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_BUSY_MASK		(0x4 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_WAIT_MASK		(0x5 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_PKT_MASK		(0x6 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_BYTE_MASK		(0x8 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_CHAIN_MASK	(0x10 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+
+/* NOCP_COUNTERS_x_ALARM_MODE register */
+#define NOCP_CNT_ALARM_MODE_SHIFT		0
+#define NOCP_CNT_ALARM_MODE_MASK		(0x3 << NOCP_CNT_ALARM_MODE_SHIFT)
+#define NOCP_CNT_ALARM_MODE_OFF_MASK		(0x0 << NOCP_CNT_ALARM_MODE_SHIFT)
+#define NOCP_CNT_ALARM_MODE_MIN_MASK		(0x1 << NOCP_CNT_ALARM_MODE_SHIFT)
+#define NOCP_CNT_ALARM_MODE_MAX_MASK		(0x2 << NOCP_CNT_ALARM_MODE_SHIFT)
+#define NOCP_CNT_ALARM_MODE_MIN_MAX_MASK	(0x3 << NOCP_CNT_ALARM_MODE_SHIFT)
+
+#endif /* __EXYNOS_NOCP_H__ */
diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
new file mode 100644
index 0000000000000000000000000000000000000000..2363d0a189b7791eebe80d62c25f62c5c3ac6a93
--- /dev/null
+++ b/drivers/devfreq/exynos-bus.c
@@ -0,0 +1,570 @@
+/*
+ * Generic Exynos Bus frequency driver with DEVFREQ Framework
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Author : Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This driver support Exynos Bus frequency feature by using
+ * DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/devfreq-event.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define DEFAULT_SATURATION_RATIO	40
+#define DEFAULT_VOLTAGE_TOLERANCE	2
+
+struct exynos_bus {
+	struct device *dev;
+
+	struct devfreq *devfreq;
+	struct devfreq_event_dev **edev;
+	unsigned int edev_count;
+	struct mutex lock;
+
+	struct dev_pm_opp *curr_opp;
+
+	struct regulator *regulator;
+	struct clk *clk;
+	unsigned int voltage_tolerance;
+	unsigned int ratio;
+};
+
+/*
+ * Control the devfreq-event device to get the current state of bus
+ */
+#define exynos_bus_ops_edev(ops)				\
+static int exynos_bus_##ops(struct exynos_bus *bus)		\
+{								\
+	int i, ret;						\
+								\
+	for (i = 0; i < bus->edev_count; i++) {			\
+		if (!bus->edev[i])				\
+			continue;				\
+		ret = devfreq_event_##ops(bus->edev[i]);	\
+		if (ret < 0)					\
+			return ret;				\
+	}							\
+								\
+	return 0;						\
+}
+exynos_bus_ops_edev(enable_edev);
+exynos_bus_ops_edev(disable_edev);
+exynos_bus_ops_edev(set_event);
+
+static int exynos_bus_get_event(struct exynos_bus *bus,
+				struct devfreq_event_data *edata)
+{
+	struct devfreq_event_data event_data;
+	unsigned long load_count = 0, total_count = 0;
+	int i, ret = 0;
+
+	for (i = 0; i < bus->edev_count; i++) {
+		if (!bus->edev[i])
+			continue;
+
+		ret = devfreq_event_get_event(bus->edev[i], &event_data);
+		if (ret < 0)
+			return ret;
+
+		if (i == 0 || event_data.load_count > load_count) {
+			load_count = event_data.load_count;
+			total_count = event_data.total_count;
+		}
+	}
+
+	edata->load_count = load_count;
+	edata->total_count = total_count;
+
+	return ret;
+}
+
+/*
+ * Must necessary function for devfreq simple-ondemand governor
+ */
+static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	struct dev_pm_opp *new_opp;
+	unsigned long old_freq, new_freq, old_volt, new_volt, tol;
+	int ret = 0;
+
+	/* Get new opp-bus instance according to new bus clock */
+	rcu_read_lock();
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		dev_err(dev, "failed to get recommended opp instance\n");
+		rcu_read_unlock();
+		return PTR_ERR(new_opp);
+	}
+
+	new_freq = dev_pm_opp_get_freq(new_opp);
+	new_volt = dev_pm_opp_get_voltage(new_opp);
+	old_freq = dev_pm_opp_get_freq(bus->curr_opp);
+	old_volt = dev_pm_opp_get_voltage(bus->curr_opp);
+	rcu_read_unlock();
+
+	if (old_freq == new_freq)
+		return 0;
+	tol = new_volt * bus->voltage_tolerance / 100;
+
+	/* Change voltage and frequency according to new OPP level */
+	mutex_lock(&bus->lock);
+
+	if (old_freq < new_freq) {
+		ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
+		if (ret < 0) {
+			dev_err(bus->dev, "failed to set voltage\n");
+			goto out;
+		}
+	}
+
+	ret = clk_set_rate(bus->clk, new_freq);
+	if (ret < 0) {
+		dev_err(dev, "failed to change clock of bus\n");
+		clk_set_rate(bus->clk, old_freq);
+		goto out;
+	}
+
+	if (old_freq > new_freq) {
+		ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
+		if (ret < 0) {
+			dev_err(bus->dev, "failed to set voltage\n");
+			goto out;
+		}
+	}
+	bus->curr_opp = new_opp;
+
+	dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n",
+			old_freq/1000, new_freq/1000);
+out:
+	mutex_unlock(&bus->lock);
+
+	return ret;
+}
+
+static int exynos_bus_get_dev_status(struct device *dev,
+				     struct devfreq_dev_status *stat)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	struct devfreq_event_data edata;
+	int ret;
+
+	rcu_read_lock();
+	stat->current_frequency = dev_pm_opp_get_freq(bus->curr_opp);
+	rcu_read_unlock();
+
+	ret = exynos_bus_get_event(bus, &edata);
+	if (ret < 0) {
+		stat->total_time = stat->busy_time = 0;
+		goto err;
+	}
+
+	stat->busy_time = (edata.load_count * 100) / bus->ratio;
+	stat->total_time = edata.total_count;
+
+	dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time,
+							stat->total_time);
+
+err:
+	ret = exynos_bus_set_event(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to set event to devfreq-event devices\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static void exynos_bus_exit(struct device *dev)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	int ret;
+
+	ret = exynos_bus_disable_edev(bus);
+	if (ret < 0)
+		dev_warn(dev, "failed to disable the devfreq-event devices\n");
+
+	if (bus->regulator)
+		regulator_disable(bus->regulator);
+
+	dev_pm_opp_of_remove_table(dev);
+	clk_disable_unprepare(bus->clk);
+}
+
+/*
+ * Must necessary function for devfreq passive governor
+ */
+static int exynos_bus_passive_target(struct device *dev, unsigned long *freq,
+					u32 flags)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	struct dev_pm_opp *new_opp;
+	unsigned long old_freq, new_freq;
+	int ret = 0;
+
+	/* Get new opp-bus instance according to new bus clock */
+	rcu_read_lock();
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		dev_err(dev, "failed to get recommended opp instance\n");
+		rcu_read_unlock();
+		return PTR_ERR(new_opp);
+	}
+
+	new_freq = dev_pm_opp_get_freq(new_opp);
+	old_freq = dev_pm_opp_get_freq(bus->curr_opp);
+	rcu_read_unlock();
+
+	if (old_freq == new_freq)
+		return 0;
+
+	/* Change the frequency according to new OPP level */
+	mutex_lock(&bus->lock);
+
+	ret = clk_set_rate(bus->clk, new_freq);
+	if (ret < 0) {
+		dev_err(dev, "failed to set the clock of bus\n");
+		goto out;
+	}
+
+	*freq = new_freq;
+	bus->curr_opp = new_opp;
+
+	dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n",
+			old_freq/1000, new_freq/1000);
+out:
+	mutex_unlock(&bus->lock);
+
+	return ret;
+}
+
+static void exynos_bus_passive_exit(struct device *dev)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+
+	dev_pm_opp_of_remove_table(dev);
+	clk_disable_unprepare(bus->clk);
+}
+
+static int exynos_bus_parent_parse_of(struct device_node *np,
+					struct exynos_bus *bus)
+{
+	struct device *dev = bus->dev;
+	int i, ret, count, size;
+
+	/* Get the regulator to provide each bus with the power */
+	bus->regulator = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(bus->regulator)) {
+		dev_err(dev, "failed to get VDD regulator\n");
+		return PTR_ERR(bus->regulator);
+	}
+
+	ret = regulator_enable(bus->regulator);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable VDD regulator\n");
+		return ret;
+	}
+
+	/*
+	 * Get the devfreq-event devices to get the current utilization of
+	 * buses. This raw data will be used in devfreq ondemand governor.
+	 */
+	count = devfreq_event_get_edev_count(dev);
+	if (count < 0) {
+		dev_err(dev, "failed to get the count of devfreq-event dev\n");
+		ret = count;
+		goto err_regulator;
+	}
+	bus->edev_count = count;
+
+	size = sizeof(*bus->edev) * count;
+	bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
+	if (!bus->edev) {
+		ret = -ENOMEM;
+		goto err_regulator;
+	}
+
+	for (i = 0; i < count; i++) {
+		bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, i);
+		if (IS_ERR(bus->edev[i])) {
+			ret = -EPROBE_DEFER;
+			goto err_regulator;
+		}
+	}
+
+	/*
+	 * Optionally, Get the saturation ratio according to Exynos SoC
+	 * When measuring the utilization of each AXI bus with devfreq-event
+	 * devices, the measured real cycle might be much lower than the
+	 * total cycle of bus during sampling rate. In result, the devfreq
+	 * simple-ondemand governor might not decide to change the current
+	 * frequency due to too utilization (= real cycle/total cycle).
+	 * So, this property is used to adjust the utilization when calculating
+	 * the busy_time in exynos_bus_get_dev_status().
+	 */
+	if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio))
+		bus->ratio = DEFAULT_SATURATION_RATIO;
+
+	if (of_property_read_u32(np, "exynos,voltage-tolerance",
+					&bus->voltage_tolerance))
+		bus->voltage_tolerance = DEFAULT_VOLTAGE_TOLERANCE;
+
+	return 0;
+
+err_regulator:
+	regulator_disable(bus->regulator);
+
+	return ret;
+}
+
+static int exynos_bus_parse_of(struct device_node *np,
+			      struct exynos_bus *bus)
+{
+	struct device *dev = bus->dev;
+	unsigned long rate;
+	int ret;
+
+	/* Get the clock to provide each bus with source clock */
+	bus->clk = devm_clk_get(dev, "bus");
+	if (IS_ERR(bus->clk)) {
+		dev_err(dev, "failed to get bus clock\n");
+		return PTR_ERR(bus->clk);
+	}
+
+	ret = clk_prepare_enable(bus->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to get enable clock\n");
+		return ret;
+	}
+
+	/* Get the freq and voltage from OPP table to scale the bus freq */
+	rcu_read_lock();
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		rcu_read_unlock();
+		goto err_clk;
+	}
+
+	rate = clk_get_rate(bus->clk);
+	bus->curr_opp = devfreq_recommended_opp(dev, &rate, 0);
+	if (IS_ERR(bus->curr_opp)) {
+		dev_err(dev, "failed to find dev_pm_opp\n");
+		rcu_read_unlock();
+		ret = PTR_ERR(bus->curr_opp);
+		goto err_opp;
+	}
+	rcu_read_unlock();
+
+	return 0;
+
+err_opp:
+	dev_pm_opp_of_remove_table(dev);
+err_clk:
+	clk_disable_unprepare(bus->clk);
+
+	return ret;
+}
+
+static int exynos_bus_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct devfreq_dev_profile *profile;
+	struct devfreq_simple_ondemand_data *ondemand_data;
+	struct devfreq_passive_data *passive_data;
+	struct devfreq *parent_devfreq;
+	struct exynos_bus *bus;
+	int ret, max_state;
+	unsigned long min_freq, max_freq;
+
+	if (!np) {
+		dev_err(dev, "failed to find devicetree node\n");
+		return -EINVAL;
+	}
+
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+	mutex_init(&bus->lock);
+	bus->dev = &pdev->dev;
+	platform_set_drvdata(pdev, bus);
+
+	/* Parse the device-tree to get the resource information */
+	ret = exynos_bus_parse_of(np, bus);
+	if (ret < 0)
+		goto err;
+
+	profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
+	if (!profile) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (of_parse_phandle(dev->of_node, "devfreq", 0))
+		goto passive;
+	else
+		ret = exynos_bus_parent_parse_of(np, bus);
+
+	if (ret < 0)
+		goto err;
+
+	/* Initialize the struct profile and governor data for parent device */
+	profile->polling_ms = 50;
+	profile->target = exynos_bus_target;
+	profile->get_dev_status = exynos_bus_get_dev_status;
+	profile->exit = exynos_bus_exit;
+
+	ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
+	if (!ondemand_data) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	ondemand_data->upthreshold = 40;
+	ondemand_data->downdifferential = 5;
+
+	/* Add devfreq device to monitor and handle the exynos bus */
+	bus->devfreq = devm_devfreq_add_device(dev, profile, "simple_ondemand",
+						ondemand_data);
+	if (IS_ERR(bus->devfreq)) {
+		dev_err(dev, "failed to add devfreq device\n");
+		ret = PTR_ERR(bus->devfreq);
+		goto err;
+	}
+
+	/* Register opp_notifier to catch the change of OPP  */
+	ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
+	if (ret < 0) {
+		dev_err(dev, "failed to register opp notifier\n");
+		goto err;
+	}
+
+	/*
+	 * Enable devfreq-event to get raw data which is used to determine
+	 * current bus load.
+	 */
+	ret = exynos_bus_enable_edev(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable devfreq-event devices\n");
+		goto err;
+	}
+
+	ret = exynos_bus_set_event(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to set event to devfreq-event devices\n");
+		goto err;
+	}
+
+	goto out;
+passive:
+	/* Initialize the struct profile and governor data for passive device */
+	profile->target = exynos_bus_passive_target;
+	profile->exit = exynos_bus_passive_exit;
+
+	/* Get the instance of parent devfreq device */
+	parent_devfreq = devfreq_get_devfreq_by_phandle(dev, 0);
+	if (IS_ERR(parent_devfreq)) {
+		ret = -EPROBE_DEFER;
+		goto err;
+	}
+
+	passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
+	if (!passive_data) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	passive_data->parent = parent_devfreq;
+
+	/* Add devfreq device for exynos bus with passive governor */
+	bus->devfreq = devm_devfreq_add_device(dev, profile, "passive",
+						passive_data);
+	if (IS_ERR(bus->devfreq)) {
+		dev_err(dev,
+			"failed to add devfreq dev with passive governor\n");
+		ret = -EPROBE_DEFER;
+		goto err;
+	}
+
+out:
+	max_state = bus->devfreq->profile->max_state;
+	min_freq = (bus->devfreq->profile->freq_table[0] / 1000);
+	max_freq = (bus->devfreq->profile->freq_table[max_state - 1] / 1000);
+	pr_info("exynos-bus: new bus device registered: %s (%6ld KHz ~ %6ld KHz)\n",
+			dev_name(dev), min_freq, max_freq);
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	clk_disable_unprepare(bus->clk);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_bus_resume(struct device *dev)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	int ret;
+
+	ret = exynos_bus_enable_edev(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable the devfreq-event devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int exynos_bus_suspend(struct device *dev)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	int ret;
+
+	ret = exynos_bus_disable_edev(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to disable the devfreq-event devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops exynos_bus_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(exynos_bus_suspend, exynos_bus_resume)
+};
+
+static const struct of_device_id exynos_bus_of_match[] = {
+	{ .compatible = "samsung,exynos-bus", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, exynos_bus_of_match);
+
+static struct platform_driver exynos_bus_platdrv = {
+	.probe		= exynos_bus_probe,
+	.driver = {
+		.name	= "exynos-bus",
+		.pm	= &exynos_bus_pm,
+		.of_match_table = of_match_ptr(exynos_bus_of_match),
+	},
+};
+module_platform_driver(exynos_bus_platdrv);
+
+MODULE_DESCRIPTION("Generic Exynos Bus frequency driver");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile
deleted file mode 100644
index 49bc9175f923539b9ad2f887f77ab88891dfc530..0000000000000000000000000000000000000000
--- a/drivers/devfreq/exynos/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# Exynos DEVFREQ Drivers
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ)	+= exynos_ppmu.o exynos4_bus.o
-obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ)	+= exynos_ppmu.o exynos5_bus.o
diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c
deleted file mode 100644
index da950920516933836516cf12864aa847ff63834f..0000000000000000000000000000000000000000
--- a/drivers/devfreq/exynos/exynos4_bus.c
+++ /dev/null
@@ -1,1055 +0,0 @@
-/* drivers/devfreq/exynos4210_memorybus.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *	MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework
- *	This version supports EXYNOS4210 only. This changes bus frequencies
- *	and vddint voltages. Exynos4412/4212 should be able to be supported
- *	with minor modifications.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/suspend.h>
-#include <linux/pm_opp.h>
-#include <linux/devfreq.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-#include <linux/module.h>
-
-#include <mach/map.h>
-
-#include "exynos_ppmu.h"
-#include "exynos4_bus.h"
-
-#define MAX_SAFEVOLT	1200000 /* 1.2V */
-
-enum exynos4_busf_type {
-	TYPE_BUSF_EXYNOS4210,
-	TYPE_BUSF_EXYNOS4x12,
-};
-
-/* Assume that the bus is saturated if the utilization is 40% */
-#define BUS_SATURATION_RATIO	40
-
-enum busclk_level_idx {
-	LV_0 = 0,
-	LV_1,
-	LV_2,
-	LV_3,
-	LV_4,
-	_LV_END
-};
-
-enum exynos_ppmu_idx {
-	PPMU_DMC0,
-	PPMU_DMC1,
-	PPMU_END,
-};
-
-#define EX4210_LV_MAX	LV_2
-#define EX4x12_LV_MAX	LV_4
-#define EX4210_LV_NUM	(LV_2 + 1)
-#define EX4x12_LV_NUM	(LV_4 + 1)
-
-/**
- * struct busfreq_opp_info - opp information for bus
- * @rate:	Frequency in hertz
- * @volt:	Voltage in microvolts corresponding to this OPP
- */
-struct busfreq_opp_info {
-	unsigned long rate;
-	unsigned long volt;
-};
-
-struct busfreq_data {
-	enum exynos4_busf_type type;
-	struct device *dev;
-	struct devfreq *devfreq;
-	bool disabled;
-	struct regulator *vdd_int;
-	struct regulator *vdd_mif; /* Exynos4412/4212 only */
-	struct busfreq_opp_info curr_oppinfo;
-	struct busfreq_ppmu_data ppmu_data;
-
-	struct notifier_block pm_notifier;
-	struct mutex lock;
-
-	/* Dividers calculated at boot/probe-time */
-	unsigned int dmc_divtable[_LV_END]; /* DMC0 */
-	unsigned int top_divtable[_LV_END];
-};
-
-/* 4210 controls clock of mif and voltage of int */
-static struct bus_opp_table exynos4210_busclk_table[] = {
-	{LV_0, 400000, 1150000},
-	{LV_1, 267000, 1050000},
-	{LV_2, 133000, 1025000},
-	{0, 0, 0},
-};
-
-/*
- * MIF is the main control knob clock for Exynos4x12 MIF/INT
- * clock and voltage of both mif/int are controlled.
- */
-static struct bus_opp_table exynos4x12_mifclk_table[] = {
-	{LV_0, 400000, 1100000},
-	{LV_1, 267000, 1000000},
-	{LV_2, 160000, 950000},
-	{LV_3, 133000, 950000},
-	{LV_4, 100000, 950000},
-	{0, 0, 0},
-};
-
-/*
- * INT is not the control knob of 4x12. LV_x is not meant to represent
- * the current performance. (MIF does)
- */
-static struct bus_opp_table exynos4x12_intclk_table[] = {
-	{LV_0, 200000, 1000000},
-	{LV_1, 160000, 950000},
-	{LV_2, 133000, 925000},
-	{LV_3, 100000, 900000},
-	{0, 0, 0},
-};
-
-/* TODO: asv volt definitions are "__initdata"? */
-/* Some chips have different operating voltages */
-static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = {
-	{1150000, 1050000, 1050000},
-	{1125000, 1025000, 1025000},
-	{1100000, 1000000, 1000000},
-	{1075000, 975000, 975000},
-	{1050000, 950000, 950000},
-};
-
-static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = {
-	/* 400      267     160     133     100 */
-	{1050000, 950000, 900000, 900000, 900000}, /* ASV0 */
-	{1050000, 950000, 900000, 900000, 900000}, /* ASV1 */
-	{1050000, 950000, 900000, 900000, 900000}, /* ASV2 */
-	{1050000, 900000, 900000, 900000, 900000}, /* ASV3 */
-	{1050000, 900000, 900000, 900000, 850000}, /* ASV4 */
-	{1050000, 900000, 900000, 850000, 850000}, /* ASV5 */
-	{1050000, 900000, 850000, 850000, 850000}, /* ASV6 */
-	{1050000, 900000, 850000, 850000, 850000}, /* ASV7 */
-	{1050000, 900000, 850000, 850000, 850000}, /* ASV8 */
-};
-
-static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = {
-	/* 200    160      133     100 */
-	{1000000, 950000, 925000, 900000}, /* ASV0 */
-	{975000,  925000, 925000, 900000}, /* ASV1 */
-	{950000,  925000, 900000, 875000}, /* ASV2 */
-	{950000,  900000, 900000, 875000}, /* ASV3 */
-	{925000,  875000, 875000, 875000}, /* ASV4 */
-	{900000,  850000, 850000, 850000}, /* ASV5 */
-	{900000,  850000, 850000, 850000}, /* ASV6 */
-	{900000,  850000, 850000, 850000}, /* ASV7 */
-	{900000,  850000, 850000, 850000}, /* ASV8 */
-};
-
-/*** Clock Divider Data for Exynos4210 ***/
-static unsigned int exynos4210_clkdiv_dmc0[][8] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
-	 *		DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
-	 */
-
-	/* DMC L0: 400MHz */
-	{ 3, 1, 1, 1, 1, 1, 3, 1 },
-	/* DMC L1: 266.7MHz */
-	{ 4, 1, 1, 2, 1, 1, 3, 1 },
-	/* DMC L2: 133MHz */
-	{ 5, 1, 1, 5, 1, 1, 3, 1 },
-};
-static unsigned int exynos4210_clkdiv_top[][5] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND }
-	 */
-	/* ACLK200 L0: 200MHz */
-	{ 3, 7, 4, 5, 1 },
-	/* ACLK200 L1: 160MHz */
-	{ 4, 7, 5, 6, 1 },
-	/* ACLK200 L2: 133MHz */
-	{ 5, 7, 7, 7, 1 },
-};
-static unsigned int exynos4210_clkdiv_lr_bus[][2] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVGDL/R, DIVGPL/R }
-	 */
-	/* ACLK_GDL/R L1: 200MHz */
-	{ 3, 1 },
-	/* ACLK_GDL/R L2: 160MHz */
-	{ 4, 1 },
-	/* ACLK_GDL/R L3: 133MHz */
-	{ 5, 1 },
-};
-
-/*** Clock Divider Data for Exynos4212/4412 ***/
-static unsigned int exynos4x12_clkdiv_dmc0[][6] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
-	 *              DIVDMCP}
-	 */
-
-	/* DMC L0: 400MHz */
-	{3, 1, 1, 1, 1, 1},
-	/* DMC L1: 266.7MHz */
-	{4, 1, 1, 2, 1, 1},
-	/* DMC L2: 160MHz */
-	{5, 1, 1, 4, 1, 1},
-	/* DMC L3: 133MHz */
-	{5, 1, 1, 5, 1, 1},
-	/* DMC L4: 100MHz */
-	{7, 1, 1, 7, 1, 1},
-};
-static unsigned int exynos4x12_clkdiv_dmc1[][6] = {
-	/*
-	 * Clock divider value for following
-	 * { G2DACP, DIVC2C, DIVC2C_ACLK }
-	 */
-
-	/* DMC L0: 400MHz */
-	{3, 1, 1},
-	/* DMC L1: 266.7MHz */
-	{4, 2, 1},
-	/* DMC L2: 160MHz */
-	{5, 4, 1},
-	/* DMC L3: 133MHz */
-	{5, 5, 1},
-	/* DMC L4: 100MHz */
-	{7, 7, 1},
-};
-static unsigned int exynos4x12_clkdiv_top[][5] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVACLK266_GPS, DIVACLK100, DIVACLK160,
-		DIVACLK133, DIVONENAND }
-	 */
-
-	/* ACLK_GDL/R L0: 200MHz */
-	{2, 7, 4, 5, 1},
-	/* ACLK_GDL/R L1: 200MHz */
-	{2, 7, 4, 5, 1},
-	/* ACLK_GDL/R L2: 160MHz */
-	{4, 7, 5, 7, 1},
-	/* ACLK_GDL/R L3: 133MHz */
-	{4, 7, 5, 7, 1},
-	/* ACLK_GDL/R L4: 100MHz */
-	{7, 7, 7, 7, 1},
-};
-static unsigned int exynos4x12_clkdiv_lr_bus[][2] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVGDL/R, DIVGPL/R }
-	 */
-
-	/* ACLK_GDL/R L0: 200MHz */
-	{3, 1},
-	/* ACLK_GDL/R L1: 200MHz */
-	{3, 1},
-	/* ACLK_GDL/R L2: 160MHz */
-	{4, 1},
-	/* ACLK_GDL/R L3: 133MHz */
-	{5, 1},
-	/* ACLK_GDL/R L4: 100MHz */
-	{7, 1},
-};
-static unsigned int exynos4x12_clkdiv_sclkip[][3] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVMFC, DIVJPEG, DIVFIMC0~3}
-	 */
-
-	/* SCLK_MFC: 200MHz */
-	{3, 3, 4},
-	/* SCLK_MFC: 200MHz */
-	{3, 3, 4},
-	/* SCLK_MFC: 160MHz */
-	{4, 4, 5},
-	/* SCLK_MFC: 133MHz */
-	{5, 5, 5},
-	/* SCLK_MFC: 100MHz */
-	{7, 7, 7},
-};
-
-
-static int exynos4210_set_busclk(struct busfreq_data *data,
-				 struct busfreq_opp_info *oppi)
-{
-	unsigned int index;
-	unsigned int tmp;
-
-	for (index = LV_0; index < EX4210_LV_NUM; index++)
-		if (oppi->rate == exynos4210_busclk_table[index].clk)
-			break;
-
-	if (index == EX4210_LV_NUM)
-		return -EINVAL;
-
-	/* Change Divider - DMC0 */
-	tmp = data->dmc_divtable[index];
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
-	} while (tmp & 0x11111111);
-
-	/* Change Divider - TOP */
-	tmp = data->top_divtable[index];
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
-	} while (tmp & 0x11111);
-
-	/* Change Divider - LEFTBUS */
-	tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
-
-	tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
-	tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
-				EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
-		(exynos4210_clkdiv_lr_bus[index][1] <<
-				EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
-	} while (tmp & 0x11);
-
-	/* Change Divider - RIGHTBUS */
-	tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
-
-	tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
-	tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
-				EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
-		(exynos4210_clkdiv_lr_bus[index][1] <<
-				EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
-	} while (tmp & 0x11);
-
-	return 0;
-}
-
-static int exynos4x12_set_busclk(struct busfreq_data *data,
-				 struct busfreq_opp_info *oppi)
-{
-	unsigned int index;
-	unsigned int tmp;
-
-	for (index = LV_0; index < EX4x12_LV_NUM; index++)
-		if (oppi->rate == exynos4x12_mifclk_table[index].clk)
-			break;
-
-	if (index == EX4x12_LV_NUM)
-		return -EINVAL;
-
-	/* Change Divider - DMC0 */
-	tmp = data->dmc_divtable[index];
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
-	} while (tmp & 0x11111111);
-
-	/* Change Divider - DMC1 */
-	tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1);
-
-	tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK |
-		EXYNOS4_CLKDIV_DMC1_C2C_MASK |
-		EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK);
-
-	tmp |= ((exynos4x12_clkdiv_dmc1[index][0] <<
-				EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) |
-		(exynos4x12_clkdiv_dmc1[index][1] <<
-				EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) |
-		(exynos4x12_clkdiv_dmc1[index][2] <<
-				EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT));
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_DMC1);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1);
-	} while (tmp & 0x111111);
-
-	/* Change Divider - TOP */
-	tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
-
-	tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK |
-		EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
-		EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
-		EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
-		EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
-
-	tmp |= ((exynos4x12_clkdiv_top[index][0] <<
-				EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
-		(exynos4x12_clkdiv_top[index][1] <<
-				EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
-		(exynos4x12_clkdiv_top[index][2] <<
-				EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
-		(exynos4x12_clkdiv_top[index][3] <<
-				EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
-		(exynos4x12_clkdiv_top[index][4] <<
-				EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
-	} while (tmp & 0x11111);
-
-	/* Change Divider - LEFTBUS */
-	tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
-
-	tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
-	tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
-				EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
-		(exynos4x12_clkdiv_lr_bus[index][1] <<
-				EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
-	} while (tmp & 0x11);
-
-	/* Change Divider - RIGHTBUS */
-	tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
-
-	tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
-	tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
-				EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
-		(exynos4x12_clkdiv_lr_bus[index][1] <<
-				EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
-	} while (tmp & 0x11);
-
-	/* Change Divider - MFC */
-	tmp = __raw_readl(EXYNOS4_CLKDIV_MFC);
-
-	tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK);
-
-	tmp |= ((exynos4x12_clkdiv_sclkip[index][0] <<
-				EXYNOS4_CLKDIV_MFC_SHIFT));
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_MFC);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC);
-	} while (tmp & 0x1);
-
-	/* Change Divider - JPEG */
-	tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1);
-
-	tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK);
-
-	tmp |= ((exynos4x12_clkdiv_sclkip[index][1] <<
-				EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT));
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CAM1);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
-	} while (tmp & 0x1);
-
-	/* Change Divider - FIMC0~3 */
-	tmp = __raw_readl(EXYNOS4_CLKDIV_CAM);
-
-	tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK |
-		EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK);
-
-	tmp |= ((exynos4x12_clkdiv_sclkip[index][2] <<
-				EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) |
-		(exynos4x12_clkdiv_sclkip[index][2] <<
-				EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) |
-		(exynos4x12_clkdiv_sclkip[index][2] <<
-				EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) |
-		(exynos4x12_clkdiv_sclkip[index][2] <<
-				EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT));
-
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CAM);
-
-	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
-	} while (tmp & 0x1111);
-
-	return 0;
-}
-
-static int exynos4x12_get_intspec(unsigned long mifclk)
-{
-	int i = 0;
-
-	while (exynos4x12_intclk_table[i].clk) {
-		if (exynos4x12_intclk_table[i].clk <= mifclk)
-			return i;
-		i++;
-	}
-
-	return -EINVAL;
-}
-
-static int exynos4_bus_setvolt(struct busfreq_data *data,
-			       struct busfreq_opp_info *oppi,
-			       struct busfreq_opp_info *oldoppi)
-{
-	int err = 0, tmp;
-	unsigned long volt = oppi->volt;
-
-	switch (data->type) {
-	case TYPE_BUSF_EXYNOS4210:
-		/* OPP represents DMC clock + INT voltage */
-		err = regulator_set_voltage(data->vdd_int, volt,
-					    MAX_SAFEVOLT);
-		break;
-	case TYPE_BUSF_EXYNOS4x12:
-		/* OPP represents MIF clock + MIF voltage */
-		err = regulator_set_voltage(data->vdd_mif, volt,
-					    MAX_SAFEVOLT);
-		if (err)
-			break;
-
-		tmp = exynos4x12_get_intspec(oppi->rate);
-		if (tmp < 0) {
-			err = tmp;
-			regulator_set_voltage(data->vdd_mif,
-					      oldoppi->volt,
-					      MAX_SAFEVOLT);
-			break;
-		}
-		err = regulator_set_voltage(data->vdd_int,
-					    exynos4x12_intclk_table[tmp].volt,
-					    MAX_SAFEVOLT);
-		/*  Try to recover */
-		if (err)
-			regulator_set_voltage(data->vdd_mif,
-					      oldoppi->volt,
-					      MAX_SAFEVOLT);
-		break;
-	default:
-		err = -EINVAL;
-	}
-
-	return err;
-}
-
-static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
-			      u32 flags)
-{
-	int err = 0;
-	struct platform_device *pdev = container_of(dev, struct platform_device,
-						    dev);
-	struct busfreq_data *data = platform_get_drvdata(pdev);
-	struct dev_pm_opp *opp;
-	unsigned long freq;
-	unsigned long old_freq = data->curr_oppinfo.rate;
-	struct busfreq_opp_info	new_oppinfo;
-
-	rcu_read_lock();
-	opp = devfreq_recommended_opp(dev, _freq, flags);
-	if (IS_ERR(opp)) {
-		rcu_read_unlock();
-		return PTR_ERR(opp);
-	}
-	new_oppinfo.rate = dev_pm_opp_get_freq(opp);
-	new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
-	rcu_read_unlock();
-	freq = new_oppinfo.rate;
-
-	if (old_freq == freq)
-		return 0;
-
-	dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt);
-
-	mutex_lock(&data->lock);
-
-	if (data->disabled)
-		goto out;
-
-	if (old_freq < freq)
-		err = exynos4_bus_setvolt(data, &new_oppinfo,
-					  &data->curr_oppinfo);
-	if (err)
-		goto out;
-
-	if (old_freq != freq) {
-		switch (data->type) {
-		case TYPE_BUSF_EXYNOS4210:
-			err = exynos4210_set_busclk(data, &new_oppinfo);
-			break;
-		case TYPE_BUSF_EXYNOS4x12:
-			err = exynos4x12_set_busclk(data, &new_oppinfo);
-			break;
-		default:
-			err = -EINVAL;
-		}
-	}
-	if (err)
-		goto out;
-
-	if (old_freq > freq)
-		err = exynos4_bus_setvolt(data, &new_oppinfo,
-					  &data->curr_oppinfo);
-	if (err)
-		goto out;
-
-	data->curr_oppinfo = new_oppinfo;
-out:
-	mutex_unlock(&data->lock);
-	return err;
-}
-
-static int exynos4_bus_get_dev_status(struct device *dev,
-				      struct devfreq_dev_status *stat)
-{
-	struct busfreq_data *data = dev_get_drvdata(dev);
-	struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
-	int busier;
-
-	exynos_read_ppmu(ppmu_data);
-	busier = exynos_get_busier_ppmu(ppmu_data);
-	stat->current_frequency = data->curr_oppinfo.rate;
-
-	/* Number of cycles spent on memory access */
-	stat->busy_time = ppmu_data->ppmu[busier].count[PPMU_PMNCNT3];
-	stat->busy_time *= 100 / BUS_SATURATION_RATIO;
-	stat->total_time = ppmu_data->ppmu[busier].ccnt;
-
-	/* If the counters have overflown, retry */
-	if (ppmu_data->ppmu[busier].ccnt_overflow ||
-	    ppmu_data->ppmu[busier].count_overflow[0])
-		return -EAGAIN;
-
-	return 0;
-}
-
-static struct devfreq_dev_profile exynos4_devfreq_profile = {
-	.initial_freq	= 400000,
-	.polling_ms	= 50,
-	.target		= exynos4_bus_target,
-	.get_dev_status	= exynos4_bus_get_dev_status,
-};
-
-static int exynos4210_init_tables(struct busfreq_data *data)
-{
-	u32 tmp;
-	int mgrp;
-	int i, err = 0;
-
-	tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
-	for (i = LV_0; i < EX4210_LV_NUM; i++) {
-		tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
-			EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
-			EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
-			EXYNOS4_CLKDIV_DMC0_DMC_MASK |
-			EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
-			EXYNOS4_CLKDIV_DMC0_DMCP_MASK |
-			EXYNOS4_CLKDIV_DMC0_COPY2_MASK |
-			EXYNOS4_CLKDIV_DMC0_CORETI_MASK);
-
-		tmp |= ((exynos4210_clkdiv_dmc0[i][0] <<
-					EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
-			(exynos4210_clkdiv_dmc0[i][1] <<
-					EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
-			(exynos4210_clkdiv_dmc0[i][2] <<
-					EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
-			(exynos4210_clkdiv_dmc0[i][3] <<
-					EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
-			(exynos4210_clkdiv_dmc0[i][4] <<
-					EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
-			(exynos4210_clkdiv_dmc0[i][5] <<
-					EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) |
-			(exynos4210_clkdiv_dmc0[i][6] <<
-					EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) |
-			(exynos4210_clkdiv_dmc0[i][7] <<
-					EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT));
-
-		data->dmc_divtable[i] = tmp;
-	}
-
-	tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
-	for (i = LV_0; i <  EX4210_LV_NUM; i++) {
-		tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK |
-			EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
-			EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
-			EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
-			EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
-
-		tmp |= ((exynos4210_clkdiv_top[i][0] <<
-					EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) |
-			(exynos4210_clkdiv_top[i][1] <<
-					EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
-			(exynos4210_clkdiv_top[i][2] <<
-					EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
-			(exynos4210_clkdiv_top[i][3] <<
-					EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
-			(exynos4210_clkdiv_top[i][4] <<
-					EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
-
-		data->top_divtable[i] = tmp;
-	}
-
-	/*
-	 * TODO: init tmp based on busfreq_data
-	 * (device-tree or platform-data)
-	 */
-	tmp = 0; /* Max voltages for the reliability of the unknown */
-
-	pr_debug("ASV Group of Exynos4 is %d\n", tmp);
-	/* Use merged grouping for voltage */
-	switch (tmp) {
-	case 0:
-		mgrp = 0;
-		break;
-	case 1:
-	case 2:
-		mgrp = 1;
-		break;
-	case 3:
-	case 4:
-		mgrp = 2;
-		break;
-	case 5:
-	case 6:
-		mgrp = 3;
-		break;
-	case 7:
-		mgrp = 4;
-		break;
-	default:
-		pr_warn("Unknown ASV Group. Use max voltage.\n");
-		mgrp = 0;
-	}
-
-	for (i = LV_0; i < EX4210_LV_NUM; i++)
-		exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i];
-
-	for (i = LV_0; i < EX4210_LV_NUM; i++) {
-		err = dev_pm_opp_add(data->dev, exynos4210_busclk_table[i].clk,
-			      exynos4210_busclk_table[i].volt);
-		if (err) {
-			dev_err(data->dev, "Cannot add opp entries.\n");
-			return err;
-		}
-	}
-
-
-	return 0;
-}
-
-static int exynos4x12_init_tables(struct busfreq_data *data)
-{
-	unsigned int i;
-	unsigned int tmp;
-	int ret;
-
-	/* Enable pause function for DREX2 DVFS */
-	tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL);
-	tmp |= EXYNOS4_DMC_PAUSE_ENABLE;
-	__raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL);
-
-	tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
-
-	for (i = 0; i <  EX4x12_LV_NUM; i++) {
-		tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
-			EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
-			EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
-			EXYNOS4_CLKDIV_DMC0_DMC_MASK |
-			EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
-			EXYNOS4_CLKDIV_DMC0_DMCP_MASK);
-
-		tmp |= ((exynos4x12_clkdiv_dmc0[i][0] <<
-					EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
-			(exynos4x12_clkdiv_dmc0[i][1] <<
-					EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
-			(exynos4x12_clkdiv_dmc0[i][2] <<
-					EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
-			(exynos4x12_clkdiv_dmc0[i][3] <<
-					EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
-			(exynos4x12_clkdiv_dmc0[i][4] <<
-					EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
-			(exynos4x12_clkdiv_dmc0[i][5] <<
-					EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT));
-
-		data->dmc_divtable[i] = tmp;
-	}
-
-	tmp = 0; /* Max voltages for the reliability of the unknown */
-
-	if (tmp > 8)
-		tmp = 0;
-	pr_debug("ASV Group of Exynos4x12 is %d\n", tmp);
-
-	for (i = 0; i < EX4x12_LV_NUM; i++) {
-		exynos4x12_mifclk_table[i].volt =
-			exynos4x12_mif_step_50[tmp][i];
-		exynos4x12_intclk_table[i].volt =
-			exynos4x12_int_volt[tmp][i];
-	}
-
-	for (i = 0; i < EX4x12_LV_NUM; i++) {
-		ret = dev_pm_opp_add(data->dev, exynos4x12_mifclk_table[i].clk,
-			      exynos4x12_mifclk_table[i].volt);
-		if (ret) {
-			dev_err(data->dev, "Fail to add opp entries.\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
-		unsigned long event, void *ptr)
-{
-	struct busfreq_data *data = container_of(this, struct busfreq_data,
-						 pm_notifier);
-	struct dev_pm_opp *opp;
-	struct busfreq_opp_info	new_oppinfo;
-	unsigned long maxfreq = ULONG_MAX;
-	int err = 0;
-
-	switch (event) {
-	case PM_SUSPEND_PREPARE:
-		/* Set Fastest and Deactivate DVFS */
-		mutex_lock(&data->lock);
-
-		data->disabled = true;
-
-		rcu_read_lock();
-		opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq);
-		if (IS_ERR(opp)) {
-			rcu_read_unlock();
-			dev_err(data->dev, "%s: unable to find a min freq\n",
-				__func__);
-			mutex_unlock(&data->lock);
-			return PTR_ERR(opp);
-		}
-		new_oppinfo.rate = dev_pm_opp_get_freq(opp);
-		new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
-		rcu_read_unlock();
-
-		err = exynos4_bus_setvolt(data, &new_oppinfo,
-					  &data->curr_oppinfo);
-		if (err)
-			goto unlock;
-
-		switch (data->type) {
-		case TYPE_BUSF_EXYNOS4210:
-			err = exynos4210_set_busclk(data, &new_oppinfo);
-			break;
-		case TYPE_BUSF_EXYNOS4x12:
-			err = exynos4x12_set_busclk(data, &new_oppinfo);
-			break;
-		default:
-			err = -EINVAL;
-		}
-		if (err)
-			goto unlock;
-
-		data->curr_oppinfo = new_oppinfo;
-unlock:
-		mutex_unlock(&data->lock);
-		if (err)
-			return err;
-		return NOTIFY_OK;
-	case PM_POST_RESTORE:
-	case PM_POST_SUSPEND:
-		/* Reactivate */
-		mutex_lock(&data->lock);
-		data->disabled = false;
-		mutex_unlock(&data->lock);
-		return NOTIFY_OK;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static int exynos4_busfreq_probe(struct platform_device *pdev)
-{
-	struct busfreq_data *data;
-	struct busfreq_ppmu_data *ppmu_data;
-	struct dev_pm_opp *opp;
-	struct device *dev = &pdev->dev;
-	int err = 0;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL);
-	if (data == NULL) {
-		dev_err(dev, "Cannot allocate memory.\n");
-		return -ENOMEM;
-	}
-
-	ppmu_data = &data->ppmu_data;
-	ppmu_data->ppmu_end = PPMU_END;
-	ppmu_data->ppmu = devm_kzalloc(dev,
-				       sizeof(struct exynos_ppmu) * PPMU_END,
-				       GFP_KERNEL);
-	if (!ppmu_data->ppmu) {
-		dev_err(dev, "Failed to allocate memory for exynos_ppmu\n");
-		return -ENOMEM;
-	}
-
-	data->type = pdev->id_entry->driver_data;
-	ppmu_data->ppmu[PPMU_DMC0].hw_base = S5P_VA_DMC0;
-	ppmu_data->ppmu[PPMU_DMC1].hw_base = S5P_VA_DMC1;
-	data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event;
-	data->dev = dev;
-	mutex_init(&data->lock);
-
-	switch (data->type) {
-	case TYPE_BUSF_EXYNOS4210:
-		err = exynos4210_init_tables(data);
-		break;
-	case TYPE_BUSF_EXYNOS4x12:
-		err = exynos4x12_init_tables(data);
-		break;
-	default:
-		dev_err(dev, "Cannot determine the device id %d\n", data->type);
-		err = -EINVAL;
-	}
-	if (err) {
-		dev_err(dev, "Cannot initialize busfreq table %d\n",
-			     data->type);
-		return err;
-	}
-
-	data->vdd_int = devm_regulator_get(dev, "vdd_int");
-	if (IS_ERR(data->vdd_int)) {
-		dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
-		return PTR_ERR(data->vdd_int);
-	}
-	if (data->type == TYPE_BUSF_EXYNOS4x12) {
-		data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
-		if (IS_ERR(data->vdd_mif)) {
-			dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n");
-			return PTR_ERR(data->vdd_mif);
-		}
-	}
-
-	rcu_read_lock();
-	opp = dev_pm_opp_find_freq_floor(dev,
-					 &exynos4_devfreq_profile.initial_freq);
-	if (IS_ERR(opp)) {
-		rcu_read_unlock();
-		dev_err(dev, "Invalid initial frequency %lu kHz.\n",
-			exynos4_devfreq_profile.initial_freq);
-		return PTR_ERR(opp);
-	}
-	data->curr_oppinfo.rate = dev_pm_opp_get_freq(opp);
-	data->curr_oppinfo.volt = dev_pm_opp_get_voltage(opp);
-	rcu_read_unlock();
-
-	platform_set_drvdata(pdev, data);
-
-	data->devfreq = devm_devfreq_add_device(dev, &exynos4_devfreq_profile,
-					   "simple_ondemand", NULL);
-	if (IS_ERR(data->devfreq))
-		return PTR_ERR(data->devfreq);
-
-	/*
-	 * Start PPMU (Performance Profiling Monitoring Unit) to check
-	 * utilization of each IP in the Exynos4 SoC.
-	 */
-	busfreq_mon_reset(ppmu_data);
-
-	/* Register opp_notifier for Exynos4 busfreq */
-	err = devm_devfreq_register_opp_notifier(dev, data->devfreq);
-	if (err < 0) {
-		dev_err(dev, "Failed to register opp notifier\n");
-		return err;
-	}
-
-	/* Register pm_notifier for Exynos4 busfreq */
-	err = register_pm_notifier(&data->pm_notifier);
-	if (err) {
-		dev_err(dev, "Failed to setup pm notifier\n");
-		return err;
-	}
-
-	return 0;
-}
-
-static int exynos4_busfreq_remove(struct platform_device *pdev)
-{
-	struct busfreq_data *data = platform_get_drvdata(pdev);
-
-	/* Unregister all of notifier chain */
-	unregister_pm_notifier(&data->pm_notifier);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_busfreq_resume(struct device *dev)
-{
-	struct busfreq_data *data = dev_get_drvdata(dev);
-	struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
-
-	busfreq_mon_reset(ppmu_data);
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(exynos4_busfreq_pm_ops, NULL, exynos4_busfreq_resume);
-
-static const struct platform_device_id exynos4_busfreq_id[] = {
-	{ "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 },
-	{ "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 },
-	{ "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 },
-	{ },
-};
-
-static struct platform_driver exynos4_busfreq_driver = {
-	.probe	= exynos4_busfreq_probe,
-	.remove	= exynos4_busfreq_remove,
-	.id_table = exynos4_busfreq_id,
-	.driver = {
-		.name	= "exynos4-busfreq",
-		.pm	= &exynos4_busfreq_pm_ops,
-	},
-};
-
-static int __init exynos4_busfreq_init(void)
-{
-	return platform_driver_register(&exynos4_busfreq_driver);
-}
-late_initcall(exynos4_busfreq_init);
-
-static void __exit exynos4_busfreq_exit(void)
-{
-	platform_driver_unregister(&exynos4_busfreq_driver);
-}
-module_exit(exynos4_busfreq_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework");
-MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
diff --git a/drivers/devfreq/exynos/exynos4_bus.h b/drivers/devfreq/exynos/exynos4_bus.h
deleted file mode 100644
index 94c73c18d28cd057947e27831fac6a77fbb44119..0000000000000000000000000000000000000000
--- a/drivers/devfreq/exynos/exynos4_bus.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS4 BUS header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __DEVFREQ_EXYNOS4_BUS_H
-#define __DEVFREQ_EXYNOS4_BUS_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_CLKDIV_LEFTBUS			(S5P_VA_CMU + 0x04500)
-#define EXYNOS4_CLKDIV_STAT_LEFTBUS		(S5P_VA_CMU + 0x04600)
-
-#define EXYNOS4_CLKDIV_RIGHTBUS			(S5P_VA_CMU + 0x08500)
-#define EXYNOS4_CLKDIV_STAT_RIGHTBUS		(S5P_VA_CMU + 0x08600)
-
-#define EXYNOS4_CLKDIV_TOP			(S5P_VA_CMU + 0x0C510)
-#define EXYNOS4_CLKDIV_CAM			(S5P_VA_CMU + 0x0C520)
-#define EXYNOS4_CLKDIV_MFC			(S5P_VA_CMU + 0x0C528)
-
-#define EXYNOS4_CLKDIV_STAT_TOP			(S5P_VA_CMU + 0x0C610)
-#define EXYNOS4_CLKDIV_STAT_MFC			(S5P_VA_CMU + 0x0C628)
-
-#define EXYNOS4210_CLKGATE_IP_IMAGE		(S5P_VA_CMU + 0x0C930)
-#define EXYNOS4212_CLKGATE_IP_IMAGE		(S5P_VA_CMU + 0x04930)
-
-#define EXYNOS4_CLKDIV_DMC0			(S5P_VA_CMU + 0x10500)
-#define EXYNOS4_CLKDIV_DMC1			(S5P_VA_CMU + 0x10504)
-#define EXYNOS4_CLKDIV_STAT_DMC0		(S5P_VA_CMU + 0x10600)
-#define EXYNOS4_CLKDIV_STAT_DMC1		(S5P_VA_CMU + 0x10604)
-
-#define EXYNOS4_DMC_PAUSE_CTRL			(S5P_VA_CMU + 0x11094)
-#define EXYNOS4_DMC_PAUSE_ENABLE		(1 << 0)
-
-#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT		(0)
-#define EXYNOS4_CLKDIV_DMC0_ACP_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT	(4)
-#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK	(0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT		(8)
-#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT		(12)
-#define EXYNOS4_CLKDIV_DMC0_DMC_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT		(16)
-#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT		(20)
-#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT		(24)
-#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT	(28)
-#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)
-
-#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT	(0)
-#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK	(0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT		(4)
-#define EXYNOS4_CLKDIV_DMC1_C2C_MASK		(0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT		(8)
-#define EXYNOS4_CLKDIV_DMC1_PWI_MASK		(0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT	(12)
-#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK	(0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT		(16)
-#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK		(0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT		(24)
-#define EXYNOS4_CLKDIV_DMC1_DPM_MASK		(0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT)
-
-#define EXYNOS4_CLKDIV_MFC_SHIFT		(0)
-#define EXYNOS4_CLKDIV_MFC_MASK			(0x7 << EXYNOS4_CLKDIV_MFC_SHIFT)
-
-#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT	(0)
-#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK		(0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT	(4)
-#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK		(0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT	(8)
-#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK		(0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT	(12)
-#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK		(0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT	(16)
-#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK		(0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT	(20)
-#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK	(0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT	(24)
-#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK	(0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT)
-
-#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT		(0)
-#define EXYNOS4_CLKDIV_BUS_GDLR_MASK		(0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT)
-#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT		(4)
-#define EXYNOS4_CLKDIV_BUS_GPLR_MASK		(0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)
-
-#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT		(0)
-#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK		(0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT		(4)
-#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK		(0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT		(8)
-#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK		(0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT		(12)
-#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK		(0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)
-
-#define EXYNOS4_CLKDIV_CAM1			(S5P_VA_CMU + 0x0C568)
-
-#define EXYNOS4_CLKDIV_STAT_CAM1		(S5P_VA_CMU + 0x0C668)
-
-#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT		(0)
-#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK		(0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
-
-#endif /* __DEVFREQ_EXYNOS4_BUS_H */
diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c
deleted file mode 100644
index 297ea30d41597abcbef815d7a96a5302216e3761..0000000000000000000000000000000000000000
--- a/drivers/devfreq/exynos/exynos5_bus.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework
- * Based on work done by Jonghwan Choi <jhbird.choi@samsung.com>
- * Support for only EXYNOS5250 is present.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/devfreq.h>
-#include <linux/io.h>
-#include <linux/pm_opp.h>
-#include <linux/slab.h>
-#include <linux/suspend.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/pm_qos.h>
-#include <linux/regulator/consumer.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-
-#include "exynos_ppmu.h"
-
-#define MAX_SAFEVOLT			1100000 /* 1.10V */
-/* Assume that the bus is saturated if the utilization is 25% */
-#define INT_BUS_SATURATION_RATIO	25
-
-enum int_level_idx {
-	LV_0,
-	LV_1,
-	LV_2,
-	LV_3,
-	LV_4,
-	_LV_END
-};
-
-enum exynos_ppmu_list {
-	PPMU_RIGHT,
-	PPMU_END,
-};
-
-struct busfreq_data_int {
-	struct device *dev;
-	struct devfreq *devfreq;
-	struct regulator *vdd_int;
-	struct busfreq_ppmu_data ppmu_data;
-	unsigned long curr_freq;
-	bool disabled;
-
-	struct notifier_block pm_notifier;
-	struct mutex lock;
-	struct pm_qos_request int_req;
-	struct clk *int_clk;
-};
-
-struct int_bus_opp_table {
-	unsigned int idx;
-	unsigned long clk;
-	unsigned long volt;
-};
-
-static struct int_bus_opp_table exynos5_int_opp_table[] = {
-	{LV_0, 266000, 1025000},
-	{LV_1, 200000, 1025000},
-	{LV_2, 160000, 1025000},
-	{LV_3, 133000, 1025000},
-	{LV_4, 100000, 1025000},
-	{0, 0, 0},
-};
-
-static int exynos5_int_setvolt(struct busfreq_data_int *data,
-				unsigned long volt)
-{
-	return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT);
-}
-
-static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq,
-			      u32 flags)
-{
-	int err = 0;
-	struct platform_device *pdev = container_of(dev, struct platform_device,
-						    dev);
-	struct busfreq_data_int *data = platform_get_drvdata(pdev);
-	struct dev_pm_opp *opp;
-	unsigned long old_freq, freq;
-	unsigned long volt;
-
-	rcu_read_lock();
-	opp = devfreq_recommended_opp(dev, _freq, flags);
-	if (IS_ERR(opp)) {
-		rcu_read_unlock();
-		dev_err(dev, "%s: Invalid OPP.\n", __func__);
-		return PTR_ERR(opp);
-	}
-
-	freq = dev_pm_opp_get_freq(opp);
-	volt = dev_pm_opp_get_voltage(opp);
-	rcu_read_unlock();
-
-	old_freq = data->curr_freq;
-
-	if (old_freq == freq)
-		return 0;
-
-	dev_dbg(dev, "targeting %lukHz %luuV\n", freq, volt);
-
-	mutex_lock(&data->lock);
-
-	if (data->disabled)
-		goto out;
-
-	if (freq > exynos5_int_opp_table[0].clk)
-		pm_qos_update_request(&data->int_req, freq * 16 / 1000);
-	else
-		pm_qos_update_request(&data->int_req, -1);
-
-	if (old_freq < freq)
-		err = exynos5_int_setvolt(data, volt);
-	if (err)
-		goto out;
-
-	err = clk_set_rate(data->int_clk, freq * 1000);
-
-	if (err)
-		goto out;
-
-	if (old_freq > freq)
-		err = exynos5_int_setvolt(data, volt);
-	if (err)
-		goto out;
-
-	data->curr_freq = freq;
-out:
-	mutex_unlock(&data->lock);
-	return err;
-}
-
-static int exynos5_int_get_dev_status(struct device *dev,
-				      struct devfreq_dev_status *stat)
-{
-	struct platform_device *pdev = container_of(dev, struct platform_device,
-						    dev);
-	struct busfreq_data_int *data = platform_get_drvdata(pdev);
-	struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
-	int busier_dmc;
-
-	exynos_read_ppmu(ppmu_data);
-	busier_dmc = exynos_get_busier_ppmu(ppmu_data);
-
-	stat->current_frequency = data->curr_freq;
-
-	/* Number of cycles spent on memory access */
-	stat->busy_time = ppmu_data->ppmu[busier_dmc].count[PPMU_PMNCNT3];
-	stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO;
-	stat->total_time = ppmu_data->ppmu[busier_dmc].ccnt;
-
-	return 0;
-}
-
-static struct devfreq_dev_profile exynos5_devfreq_int_profile = {
-	.initial_freq		= 160000,
-	.polling_ms		= 100,
-	.target			= exynos5_busfreq_int_target,
-	.get_dev_status		= exynos5_int_get_dev_status,
-};
-
-static int exynos5250_init_int_tables(struct busfreq_data_int *data)
-{
-	int i, err = 0;
-
-	for (i = LV_0; i < _LV_END; i++) {
-		err = dev_pm_opp_add(data->dev, exynos5_int_opp_table[i].clk,
-				exynos5_int_opp_table[i].volt);
-		if (err) {
-			dev_err(data->dev, "Cannot add opp entries.\n");
-			return err;
-		}
-	}
-
-	return 0;
-}
-
-static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this,
-		unsigned long event, void *ptr)
-{
-	struct busfreq_data_int *data = container_of(this,
-					struct busfreq_data_int, pm_notifier);
-	struct dev_pm_opp *opp;
-	unsigned long maxfreq = ULONG_MAX;
-	unsigned long freq;
-	unsigned long volt;
-	int err = 0;
-
-	switch (event) {
-	case PM_SUSPEND_PREPARE:
-		/* Set Fastest and Deactivate DVFS */
-		mutex_lock(&data->lock);
-
-		data->disabled = true;
-
-		rcu_read_lock();
-		opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq);
-		if (IS_ERR(opp)) {
-			rcu_read_unlock();
-			err = PTR_ERR(opp);
-			goto unlock;
-		}
-		freq = dev_pm_opp_get_freq(opp);
-		volt = dev_pm_opp_get_voltage(opp);
-		rcu_read_unlock();
-
-		err = exynos5_int_setvolt(data, volt);
-		if (err)
-			goto unlock;
-
-		err = clk_set_rate(data->int_clk, freq * 1000);
-
-		if (err)
-			goto unlock;
-
-		data->curr_freq = freq;
-unlock:
-		mutex_unlock(&data->lock);
-		if (err)
-			return NOTIFY_BAD;
-		return NOTIFY_OK;
-	case PM_POST_RESTORE:
-	case PM_POST_SUSPEND:
-		/* Reactivate */
-		mutex_lock(&data->lock);
-		data->disabled = false;
-		mutex_unlock(&data->lock);
-		return NOTIFY_OK;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static int exynos5_busfreq_int_probe(struct platform_device *pdev)
-{
-	struct busfreq_data_int *data;
-	struct busfreq_ppmu_data *ppmu_data;
-	struct dev_pm_opp *opp;
-	struct device *dev = &pdev->dev;
-	struct device_node *np;
-	unsigned long initial_freq;
-	unsigned long initial_volt;
-	int err = 0;
-	int i;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int),
-				GFP_KERNEL);
-	if (data == NULL) {
-		dev_err(dev, "Cannot allocate memory.\n");
-		return -ENOMEM;
-	}
-
-	ppmu_data = &data->ppmu_data;
-	ppmu_data->ppmu_end = PPMU_END;
-	ppmu_data->ppmu = devm_kzalloc(dev,
-				       sizeof(struct exynos_ppmu) * PPMU_END,
-				       GFP_KERNEL);
-	if (!ppmu_data->ppmu) {
-		dev_err(dev, "Failed to allocate memory for exynos_ppmu\n");
-		return -ENOMEM;
-	}
-
-	np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu");
-	if (np == NULL) {
-		pr_err("Unable to find PPMU node\n");
-		return -ENOENT;
-	}
-
-	for (i = 0; i < ppmu_data->ppmu_end; i++) {
-		/* map PPMU memory region */
-		ppmu_data->ppmu[i].hw_base = of_iomap(np, i);
-		if (ppmu_data->ppmu[i].hw_base == NULL) {
-			dev_err(&pdev->dev, "failed to map memory region\n");
-			return -ENOMEM;
-		}
-	}
-	data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event;
-	data->dev = dev;
-	mutex_init(&data->lock);
-
-	err = exynos5250_init_int_tables(data);
-	if (err)
-		return err;
-
-	data->vdd_int = devm_regulator_get(dev, "vdd_int");
-	if (IS_ERR(data->vdd_int)) {
-		dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
-		return PTR_ERR(data->vdd_int);
-	}
-
-	data->int_clk = devm_clk_get(dev, "int_clk");
-	if (IS_ERR(data->int_clk)) {
-		dev_err(dev, "Cannot get clock \"int_clk\"\n");
-		return PTR_ERR(data->int_clk);
-	}
-
-	rcu_read_lock();
-	opp = dev_pm_opp_find_freq_floor(dev,
-			&exynos5_devfreq_int_profile.initial_freq);
-	if (IS_ERR(opp)) {
-		rcu_read_unlock();
-		dev_err(dev, "Invalid initial frequency %lu kHz.\n",
-		       exynos5_devfreq_int_profile.initial_freq);
-		return PTR_ERR(opp);
-	}
-	initial_freq = dev_pm_opp_get_freq(opp);
-	initial_volt = dev_pm_opp_get_voltage(opp);
-	rcu_read_unlock();
-	data->curr_freq = initial_freq;
-
-	err = clk_set_rate(data->int_clk, initial_freq * 1000);
-	if (err) {
-		dev_err(dev, "Failed to set initial frequency\n");
-		return err;
-	}
-
-	err = exynos5_int_setvolt(data, initial_volt);
-	if (err)
-		return err;
-
-	platform_set_drvdata(pdev, data);
-
-	busfreq_mon_reset(ppmu_data);
-
-	data->devfreq = devm_devfreq_add_device(dev, &exynos5_devfreq_int_profile,
-					   "simple_ondemand", NULL);
-	if (IS_ERR(data->devfreq))
-		return PTR_ERR(data->devfreq);
-
-	err = devm_devfreq_register_opp_notifier(dev, data->devfreq);
-	if (err < 0) {
-		dev_err(dev, "Failed to register opp notifier\n");
-		return err;
-	}
-
-	err = register_pm_notifier(&data->pm_notifier);
-	if (err) {
-		dev_err(dev, "Failed to setup pm notifier\n");
-		return err;
-	}
-
-	/* TODO: Add a new QOS class for int/mif bus */
-	pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1);
-
-	return 0;
-}
-
-static int exynos5_busfreq_int_remove(struct platform_device *pdev)
-{
-	struct busfreq_data_int *data = platform_get_drvdata(pdev);
-
-	pm_qos_remove_request(&data->int_req);
-	unregister_pm_notifier(&data->pm_notifier);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos5_busfreq_int_resume(struct device *dev)
-{
-	struct platform_device *pdev = container_of(dev, struct platform_device,
-						    dev);
-	struct busfreq_data_int *data = platform_get_drvdata(pdev);
-	struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
-
-	busfreq_mon_reset(ppmu_data);
-	return 0;
-}
-static const struct dev_pm_ops exynos5_busfreq_int_pm = {
-	.resume	= exynos5_busfreq_int_resume,
-};
-#endif
-static SIMPLE_DEV_PM_OPS(exynos5_busfreq_int_pm_ops, NULL,
-			 exynos5_busfreq_int_resume);
-
-/* platform device pointer for exynos5 devfreq device. */
-static struct platform_device *exynos5_devfreq_pdev;
-
-static struct platform_driver exynos5_busfreq_int_driver = {
-	.probe		= exynos5_busfreq_int_probe,
-	.remove		= exynos5_busfreq_int_remove,
-	.driver		= {
-		.name		= "exynos5-bus-int",
-		.pm		= &exynos5_busfreq_int_pm_ops,
-	},
-};
-
-static int __init exynos5_busfreq_int_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&exynos5_busfreq_int_driver);
-	if (ret < 0)
-		goto out;
-
-	exynos5_devfreq_pdev =
-		platform_device_register_simple("exynos5-bus-int", -1, NULL, 0);
-	if (IS_ERR(exynos5_devfreq_pdev)) {
-		ret = PTR_ERR(exynos5_devfreq_pdev);
-		goto out1;
-	}
-
-	return 0;
-out1:
-	platform_driver_unregister(&exynos5_busfreq_int_driver);
-out:
-	return ret;
-}
-late_initcall(exynos5_busfreq_int_init);
-
-static void __exit exynos5_busfreq_int_exit(void)
-{
-	platform_device_unregister(exynos5_devfreq_pdev);
-	platform_driver_unregister(&exynos5_busfreq_int_driver);
-}
-module_exit(exynos5_busfreq_int_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework");
diff --git a/drivers/devfreq/exynos/exynos_ppmu.c b/drivers/devfreq/exynos/exynos_ppmu.c
deleted file mode 100644
index 97b75e513d29123c9901e2d06195f6ae40dc1596..0000000000000000000000000000000000000000
--- a/drivers/devfreq/exynos/exynos_ppmu.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS - PPMU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include "exynos_ppmu.h"
-
-void exynos_ppmu_reset(void __iomem *ppmu_base)
-{
-	__raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base);
-	__raw_writel(PPMU_ENABLE_CYCLE  |
-		     PPMU_ENABLE_COUNT0 |
-		     PPMU_ENABLE_COUNT1 |
-		     PPMU_ENABLE_COUNT2 |
-		     PPMU_ENABLE_COUNT3,
-		     ppmu_base + PPMU_CNTENS);
-}
-
-void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
-			unsigned int evt)
-{
-	__raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch));
-}
-
-void exynos_ppmu_start(void __iomem *ppmu_base)
-{
-	__raw_writel(PPMU_ENABLE, ppmu_base);
-}
-
-void exynos_ppmu_stop(void __iomem *ppmu_base)
-{
-	__raw_writel(PPMU_DISABLE, ppmu_base);
-}
-
-unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch)
-{
-	unsigned int total;
-
-	if (ch == PPMU_PMNCNT3)
-		total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) |
-			  __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1)));
-	else
-		total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch));
-
-	return total;
-}
-
-void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data)
-{
-	unsigned int i;
-
-	for (i = 0; i < ppmu_data->ppmu_end; i++) {
-		void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base;
-
-		/* Reset the performance and cycle counters */
-		exynos_ppmu_reset(ppmu_base);
-
-		/* Setup count registers to monitor read/write transactions */
-		ppmu_data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
-		exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
-					ppmu_data->ppmu[i].event[PPMU_PMNCNT3]);
-
-		exynos_ppmu_start(ppmu_base);
-	}
-}
-EXPORT_SYMBOL(busfreq_mon_reset);
-
-void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data)
-{
-	int i, j;
-
-	for (i = 0; i < ppmu_data->ppmu_end; i++) {
-		void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base;
-
-		exynos_ppmu_stop(ppmu_base);
-
-		/* Update local data from PPMU */
-		ppmu_data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
-
-		for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
-			if (ppmu_data->ppmu[i].event[j] == 0)
-				ppmu_data->ppmu[i].count[j] = 0;
-			else
-				ppmu_data->ppmu[i].count[j] =
-					exynos_ppmu_read(ppmu_base, j);
-		}
-	}
-
-	busfreq_mon_reset(ppmu_data);
-}
-EXPORT_SYMBOL(exynos_read_ppmu);
-
-int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data)
-{
-	unsigned int count = 0;
-	int i, j, busy = 0;
-
-	for (i = 0; i < ppmu_data->ppmu_end; i++) {
-		for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
-			if (ppmu_data->ppmu[i].count[j] > count) {
-				count = ppmu_data->ppmu[i].count[j];
-				busy = i;
-			}
-		}
-	}
-
-	return busy;
-}
-EXPORT_SYMBOL(exynos_get_busier_ppmu);
diff --git a/drivers/devfreq/exynos/exynos_ppmu.h b/drivers/devfreq/exynos/exynos_ppmu.h
deleted file mode 100644
index 71f17ba3563cb0dace20d4bb5a90bc6975769f9b..0000000000000000000000000000000000000000
--- a/drivers/devfreq/exynos/exynos_ppmu.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS PPMU header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __DEVFREQ_EXYNOS_PPMU_H
-#define __DEVFREQ_EXYNOS_PPMU_H __FILE__
-
-#include <linux/ktime.h>
-
-/* For PPMU Control */
-#define PPMU_ENABLE             BIT(0)
-#define PPMU_DISABLE            0x0
-#define PPMU_CYCLE_RESET        BIT(1)
-#define PPMU_COUNTER_RESET      BIT(2)
-
-#define PPMU_ENABLE_COUNT0      BIT(0)
-#define PPMU_ENABLE_COUNT1      BIT(1)
-#define PPMU_ENABLE_COUNT2      BIT(2)
-#define PPMU_ENABLE_COUNT3      BIT(3)
-#define PPMU_ENABLE_CYCLE       BIT(31)
-
-#define PPMU_CNTENS		0x10
-#define PPMU_FLAG		0x50
-#define PPMU_CCNT_OVERFLOW	BIT(31)
-#define PPMU_CCNT		0x100
-
-#define PPMU_PMCNT0		0x110
-#define PPMU_PMCNT_OFFSET	0x10
-#define PMCNT_OFFSET(x)		(PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x))
-
-#define PPMU_BEVT0SEL		0x1000
-#define PPMU_BEVTSEL_OFFSET	0x100
-#define PPMU_BEVTSEL(x)		(PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET))
-
-/* For Event Selection */
-#define RD_DATA_COUNT		0x5
-#define WR_DATA_COUNT		0x6
-#define RDWR_DATA_COUNT		0x7
-
-enum ppmu_counter {
-	PPMU_PMNCNT0,
-	PPMU_PMCCNT1,
-	PPMU_PMNCNT2,
-	PPMU_PMNCNT3,
-	PPMU_PMNCNT_MAX,
-};
-
-struct bus_opp_table {
-	unsigned int idx;
-	unsigned long clk;
-	unsigned long volt;
-};
-
-struct exynos_ppmu {
-	void __iomem *hw_base;
-	unsigned int ccnt;
-	unsigned int event[PPMU_PMNCNT_MAX];
-	unsigned int count[PPMU_PMNCNT_MAX];
-	unsigned long long ns;
-	ktime_t reset_time;
-	bool ccnt_overflow;
-	bool count_overflow[PPMU_PMNCNT_MAX];
-};
-
-struct busfreq_ppmu_data {
-	struct exynos_ppmu *ppmu;
-	int ppmu_end;
-};
-
-void exynos_ppmu_reset(void __iomem *ppmu_base);
-void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
-			unsigned int evt);
-void exynos_ppmu_start(void __iomem *ppmu_base);
-void exynos_ppmu_stop(void __iomem *ppmu_base);
-unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch);
-void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data);
-void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data);
-int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data);
-#endif /* __DEVFREQ_EXYNOS_PPMU_H */
diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
new file mode 100644
index 0000000000000000000000000000000000000000..9ef46e2592c45616cb59471c7cb2698155b56b7e
--- /dev/null
+++ b/drivers/devfreq/governor_passive.c
@@ -0,0 +1,205 @@
+/*
+ * linux/drivers/devfreq/governor_passive.c
+ *
+ * Copyright (C) 2016 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/devfreq.h>
+#include "governor.h"
+
+static int devfreq_passive_get_target_freq(struct devfreq *devfreq,
+					unsigned long *freq)
+{
+	struct devfreq_passive_data *p_data
+			= (struct devfreq_passive_data *)devfreq->data;
+	struct devfreq *parent_devfreq = (struct devfreq *)p_data->parent;
+	unsigned long child_freq = ULONG_MAX;
+	struct dev_pm_opp *opp;
+	int i, count, ret = 0;
+
+	/*
+	 * If the devfreq device with passive governor has the specific method
+	 * to determine the next frequency, should use the get_target_freq()
+	 * of struct devfreq_passive_data.
+	 */
+	if (p_data->get_target_freq) {
+		ret = p_data->get_target_freq(devfreq, freq);
+		goto out;
+	}
+
+	/*
+	 * If the parent and passive devfreq device uses the OPP table,
+	 * get the next frequency by using the OPP table.
+	 */
+
+	/*
+	 * - parent devfreq device uses the governors except for passive.
+	 * - passive devfreq device uses the passive governor.
+	 *
+	 * Each devfreq has the OPP table. After deciding the new frequency
+	 * from the governor of parent devfreq device, the passive governor
+	 * need to get the index of new frequency on OPP table of parent
+	 * device. And then the index is used for getting the suitable
+	 * new frequency for passive devfreq device.
+	 */
+	if (!devfreq->profile || !devfreq->profile->freq_table
+		|| devfreq->profile->max_state <= 0)
+		return -EINVAL;
+
+	/*
+	 * The passive governor have to get the correct frequency from OPP
+	 * list of parent device. Because in this case, *freq is temporary
+	 * value which is decided by ondemand governor.
+	 */
+	rcu_read_lock();
+	opp = devfreq_recommended_opp(parent_devfreq->dev.parent, freq, 0);
+	rcu_read_unlock();
+	if (IS_ERR(opp)) {
+		ret = PTR_ERR(opp);
+		goto out;
+	}
+
+	/*
+	 * Get the OPP table's index of decided freqeuncy by governor
+	 * of parent device.
+	 */
+	for (i = 0; i < parent_devfreq->profile->max_state; i++)
+		if (parent_devfreq->profile->freq_table[i] == *freq)
+			break;
+
+	if (i == parent_devfreq->profile->max_state) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Get the suitable frequency by using index of parent device. */
+	if (i < devfreq->profile->max_state) {
+		child_freq = devfreq->profile->freq_table[i];
+	} else {
+		count = devfreq->profile->max_state;
+		child_freq = devfreq->profile->freq_table[count - 1];
+	}
+
+	/* Return the suitable frequency for passive device. */
+	*freq = child_freq;
+
+out:
+	return ret;
+}
+
+static int update_devfreq_passive(struct devfreq *devfreq, unsigned long freq)
+{
+	int ret;
+
+	if (!devfreq->governor)
+		return -EINVAL;
+
+	mutex_lock_nested(&devfreq->lock, SINGLE_DEPTH_NESTING);
+
+	ret = devfreq->governor->get_target_freq(devfreq, &freq);
+	if (ret < 0)
+		goto out;
+
+	ret = devfreq->profile->target(devfreq->dev.parent, &freq, 0);
+	if (ret < 0)
+		goto out;
+
+	devfreq->previous_freq = freq;
+
+out:
+	mutex_unlock(&devfreq->lock);
+
+	return 0;
+}
+
+static int devfreq_passive_notifier_call(struct notifier_block *nb,
+				unsigned long event, void *ptr)
+{
+	struct devfreq_passive_data *data
+			= container_of(nb, struct devfreq_passive_data, nb);
+	struct devfreq *devfreq = (struct devfreq *)data->this;
+	struct devfreq *parent = (struct devfreq *)data->parent;
+	struct devfreq_freqs *freqs = (struct devfreq_freqs *)ptr;
+	unsigned long freq = freqs->new;
+
+	switch (event) {
+	case DEVFREQ_PRECHANGE:
+		if (parent->previous_freq > freq)
+			update_devfreq_passive(devfreq, freq);
+		break;
+	case DEVFREQ_POSTCHANGE:
+		if (parent->previous_freq < freq)
+			update_devfreq_passive(devfreq, freq);
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int devfreq_passive_event_handler(struct devfreq *devfreq,
+				unsigned int event, void *data)
+{
+	struct device *dev = devfreq->dev.parent;
+	struct devfreq_passive_data *p_data
+			= (struct devfreq_passive_data *)devfreq->data;
+	struct devfreq *parent = (struct devfreq *)p_data->parent;
+	struct notifier_block *nb = &p_data->nb;
+	int ret = 0;
+
+	if (!parent)
+		return -EPROBE_DEFER;
+
+	switch (event) {
+	case DEVFREQ_GOV_START:
+		if (!p_data->this)
+			p_data->this = devfreq;
+
+		nb->notifier_call = devfreq_passive_notifier_call;
+		ret = devm_devfreq_register_notifier(dev, parent, nb,
+					DEVFREQ_TRANSITION_NOTIFIER);
+		break;
+	case DEVFREQ_GOV_STOP:
+		devm_devfreq_unregister_notifier(dev, parent, nb,
+					DEVFREQ_TRANSITION_NOTIFIER);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static struct devfreq_governor devfreq_passive = {
+	.name = "passive",
+	.get_target_freq = devfreq_passive_get_target_freq,
+	.event_handler = devfreq_passive_event_handler,
+};
+
+static int __init devfreq_passive_init(void)
+{
+	return devfreq_add_governor(&devfreq_passive);
+}
+subsys_initcall(devfreq_passive_init);
+
+static void __exit devfreq_passive_exit(void)
+{
+	int ret;
+
+	ret = devfreq_remove_governor(&devfreq_passive);
+	if (ret)
+		pr_err("%s: failed remove governor %d\n", __func__, ret);
+}
+module_exit(devfreq_passive_exit);
+
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("DEVFREQ Passive governor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c
index b5d05807e6ecd509058fcb85a3f4810ce17a8adc..fa4ea22ca12e5512940114262241f5338f838e16 100644
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -355,7 +355,7 @@ int psci_cpu_suspend_enter(unsigned long index)
 
 /* ARM specific CPU idle operations */
 #ifdef CONFIG_ARM
-static struct cpuidle_ops psci_cpuidle_ops __initdata = {
+static const struct cpuidle_ops psci_cpuidle_ops __initconst = {
 	.suspend = psci_cpu_suspend_enter,
 	.init = psci_dt_cpu_init_idle,
 };
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index c6935de425fa22ed2b0d08e7d55b5ae02ccde0c6..c96649292b556f18647f1dc2a3fa075cfe176ae8 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -766,6 +766,67 @@ static struct cpuidle_state knl_cstates[] = {
 		.enter = NULL }
 };
 
+static struct cpuidle_state bxt_cstates[] = {
+	{
+		.name = "C1-BXT",
+		.desc = "MWAIT 0x00",
+		.flags = MWAIT2flg(0x00),
+		.exit_latency = 2,
+		.target_residency = 2,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C1E-BXT",
+		.desc = "MWAIT 0x01",
+		.flags = MWAIT2flg(0x01),
+		.exit_latency = 10,
+		.target_residency = 20,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C6-BXT",
+		.desc = "MWAIT 0x20",
+		.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 133,
+		.target_residency = 133,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C7s-BXT",
+		.desc = "MWAIT 0x31",
+		.flags = MWAIT2flg(0x31) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 155,
+		.target_residency = 155,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C8-BXT",
+		.desc = "MWAIT 0x40",
+		.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 1000,
+		.target_residency = 1000,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C9-BXT",
+		.desc = "MWAIT 0x50",
+		.flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 2000,
+		.target_residency = 2000,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C10-BXT",
+		.desc = "MWAIT 0x60",
+		.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 10000,
+		.target_residency = 10000,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.enter = NULL }
+};
+
 /**
  * intel_idle
  * @dev: cpuidle_device
@@ -950,6 +1011,11 @@ static const struct idle_cpu idle_cpu_knl = {
 	.state_table = knl_cstates,
 };
 
+static const struct idle_cpu idle_cpu_bxt = {
+	.state_table = bxt_cstates,
+	.disable_promotion_to_c1e = true,
+};
+
 #define ICPU(model, cpu) \
 	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu }
 
@@ -985,6 +1051,7 @@ static const struct x86_cpu_id intel_idle_ids[] __initconst = {
 	ICPU(0x9e, idle_cpu_skl),
 	ICPU(0x55, idle_cpu_skx),
 	ICPU(0x57, idle_cpu_knl),
+	ICPU(0x5c, idle_cpu_bxt),
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);
@@ -1075,6 +1142,73 @@ static void ivt_idle_state_table_update(void)
 
 	/* else, 1 and 2 socket systems use default ivt_cstates */
 }
+
+/*
+ * Translate IRTL (Interrupt Response Time Limit) MSR to usec
+ */
+
+static unsigned int irtl_ns_units[] = {
+	1, 32, 1024, 32768, 1048576, 33554432, 0, 0 };
+
+static unsigned long long irtl_2_usec(unsigned long long irtl)
+{
+	unsigned long long ns;
+
+	ns = irtl_ns_units[(irtl >> 10) & 0x3];
+
+	return div64_u64((irtl & 0x3FF) * ns, 1000);
+}
+/*
+ * bxt_idle_state_table_update(void)
+ *
+ * On BXT, we trust the IRTL to show the definitive maximum latency
+ * We use the same value for target_residency.
+ */
+static void bxt_idle_state_table_update(void)
+{
+	unsigned long long msr;
+
+	rdmsrl(MSR_PKGC6_IRTL, msr);
+	if (msr) {
+		unsigned int usec = irtl_2_usec(msr);
+
+		bxt_cstates[2].exit_latency = usec;
+		bxt_cstates[2].target_residency = usec;
+	}
+
+	rdmsrl(MSR_PKGC7_IRTL, msr);
+	if (msr) {
+		unsigned int usec = irtl_2_usec(msr);
+
+		bxt_cstates[3].exit_latency = usec;
+		bxt_cstates[3].target_residency = usec;
+	}
+
+	rdmsrl(MSR_PKGC8_IRTL, msr);
+	if (msr) {
+		unsigned int usec = irtl_2_usec(msr);
+
+		bxt_cstates[4].exit_latency = usec;
+		bxt_cstates[4].target_residency = usec;
+	}
+
+	rdmsrl(MSR_PKGC9_IRTL, msr);
+	if (msr) {
+		unsigned int usec = irtl_2_usec(msr);
+
+		bxt_cstates[5].exit_latency = usec;
+		bxt_cstates[5].target_residency = usec;
+	}
+
+	rdmsrl(MSR_PKGC10_IRTL, msr);
+	if (msr) {
+		unsigned int usec = irtl_2_usec(msr);
+
+		bxt_cstates[6].exit_latency = usec;
+		bxt_cstates[6].target_residency = usec;
+	}
+
+}
 /*
  * sklh_idle_state_table_update(void)
  *
@@ -1130,6 +1264,9 @@ static void intel_idle_state_table_update(void)
 	case 0x3e: /* IVT */
 		ivt_idle_state_table_update();
 		break;
+	case 0x5c: /* BXT */
+		bxt_idle_state_table_update();
+		break;
 	case 0x5e: /* SKL-H */
 		sklh_idle_state_table_update();
 		break;
diff --git a/drivers/mmc/host/toshsd.c b/drivers/mmc/host/toshsd.c
index e2cdd5fb14237e28087348efe6cacfcf51932490..553ef41bb8066d284a6e2d9aa26707c2da9d4b38 100644
--- a/drivers/mmc/host/toshsd.c
+++ b/drivers/mmc/host/toshsd.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/pm.h>
+#include <linux/pm_runtime.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 
diff --git a/drivers/power/avs/rockchip-io-domain.c b/drivers/power/avs/rockchip-io-domain.c
index 8986382718dd0a3191d423cc5b730f8a395715ba..01b6d3f9b8fb32aa9877aabbc943bc01abed61d6 100644
--- a/drivers/power/avs/rockchip-io-domain.c
+++ b/drivers/power/avs/rockchip-io-domain.c
@@ -336,6 +336,7 @@ static int rockchip_iodomain_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *match;
 	struct rockchip_iodomain *iod;
+	struct device *parent;
 	int i, ret = 0;
 
 	if (!np)
@@ -351,7 +352,14 @@ static int rockchip_iodomain_probe(struct platform_device *pdev)
 	match = of_match_node(rockchip_iodomain_match, np);
 	iod->soc_data = (struct rockchip_iodomain_soc_data *)match->data;
 
-	iod->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	parent = pdev->dev.parent;
+	if (parent && parent->of_node) {
+		iod->grf = syscon_node_to_regmap(parent->of_node);
+	} else {
+		dev_dbg(&pdev->dev, "falling back to old binding\n");
+		iod->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	}
+
 	if (IS_ERR(iod->grf)) {
 		dev_err(&pdev->dev, "couldn't find grf regmap\n");
 		return PTR_ERR(iod->grf);
diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c
index f2201d42a9cdd8a5acde7000127aa29e2cc83f59..b2766b867b0eb692dd30d7a1987567b5688077c9 100644
--- a/drivers/powercap/intel_rapl.c
+++ b/drivers/powercap/intel_rapl.c
@@ -1115,6 +1115,8 @@ static const struct x86_cpu_id rapl_ids[] __initconst = {
 	RAPL_CPU(0X5C, rapl_defaults_core),/* Broxton */
 	RAPL_CPU(0x5E, rapl_defaults_core),/* Skylake-H/S */
 	RAPL_CPU(0x57, rapl_defaults_hsw_server),/* Knights Landing */
+	RAPL_CPU(0x8E, rapl_defaults_core),/* Kabylake */
+	RAPL_CPU(0x9E, rapl_defaults_core),/* Kabylake */
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, rapl_ids);
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index 5548a31e1a39a100142b45841cbe38e1aa007e38..1fcbb22a4a1c6c7b7530481a164cc9d115648cd2 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -274,7 +274,7 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
 	return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO;
 }
 
-static struct cpuidle_ops qcom_cpuidle_ops __initdata = {
+static const struct cpuidle_ops qcom_cpuidle_ops __initconst = {
 	.suspend = qcom_idle_enter,
 	.init = qcom_cpuidle_init,
 };
diff --git a/include/linux/cpufreq-dt.h b/include/linux/cpufreq-dt.h
deleted file mode 100644
index 0414009e2c30668c1474a58b497db5f9ee4630aa..0000000000000000000000000000000000000000
--- a/include/linux/cpufreq-dt.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2014 Marvell
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __CPUFREQ_DT_H__
-#define __CPUFREQ_DT_H__
-
-struct cpufreq_dt_platform_data {
-	/*
-	 * True when each CPU has its own clock to control its
-	 * frequency, false when all CPUs are controlled by a single
-	 * clock.
-	 */
-	bool independent_clocks;
-};
-
-#endif /* __CPUFREQ_DT_H__ */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 718e8725de8aa4d1d13004af368c8585e4f655a4..4e81e08db7522f12b0972c56739474a4f4825ee8 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -102,6 +102,17 @@ struct cpufreq_policy {
 	 */
 	struct rw_semaphore	rwsem;
 
+	/*
+	 * Fast switch flags:
+	 * - fast_switch_possible should be set by the driver if it can
+	 *   guarantee that frequency can be changed on any CPU sharing the
+	 *   policy and that the change will affect all of the policy CPUs then.
+	 * - fast_switch_enabled is to be set by governors that support fast
+	 *   freqnency switching with the help of cpufreq_enable_fast_switch().
+	 */
+	bool			fast_switch_possible;
+	bool			fast_switch_enabled;
+
 	/* Synchronization for frequency transitions */
 	bool			transition_ongoing; /* Tracks transition status */
 	spinlock_t		transition_lock;
@@ -156,6 +167,8 @@ int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
 int cpufreq_update_policy(unsigned int cpu);
 bool have_governor_per_policy(void);
 struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy);
+void cpufreq_enable_fast_switch(struct cpufreq_policy *policy);
+void cpufreq_disable_fast_switch(struct cpufreq_policy *policy);
 #else
 static inline unsigned int cpufreq_get(unsigned int cpu)
 {
@@ -236,6 +249,8 @@ struct cpufreq_driver {
 				  unsigned int relation);	/* Deprecated */
 	int		(*target_index)(struct cpufreq_policy *policy,
 					unsigned int index);
+	unsigned int	(*fast_switch)(struct cpufreq_policy *policy,
+				       unsigned int target_freq);
 	/*
 	 * Only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION
 	 * unset.
@@ -426,6 +441,20 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div,
 #define CPUFREQ_POLICY_POWERSAVE	(1)
 #define CPUFREQ_POLICY_PERFORMANCE	(2)
 
+/*
+ * The polling frequency depends on the capability of the processor. Default
+ * polling frequency is 1000 times the transition latency of the processor. The
+ * ondemand governor will work on any processor with transition latency <= 10ms,
+ * using appropriate sampling rate.
+ *
+ * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL)
+ * the ondemand governor will not work. All times here are in us (microseconds).
+ */
+#define MIN_SAMPLING_RATE_RATIO		(2)
+#define LATENCY_MULTIPLIER		(1000)
+#define MIN_LATENCY_MULTIPLIER		(20)
+#define TRANSITION_LATENCY_LIMIT	(10 * 1000 * 1000)
+
 /* Governor Events */
 #define CPUFREQ_GOV_START	1
 #define CPUFREQ_GOV_STOP	2
@@ -450,6 +479,8 @@ struct cpufreq_governor {
 };
 
 /* Pass a target to the cpufreq driver */
+unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy,
+					unsigned int target_freq);
 int cpufreq_driver_target(struct cpufreq_policy *policy,
 				 unsigned int target_freq,
 				 unsigned int relation);
@@ -462,6 +493,29 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor);
 struct cpufreq_governor *cpufreq_default_governor(void);
 struct cpufreq_governor *cpufreq_fallback_governor(void);
 
+/* Governor attribute set */
+struct gov_attr_set {
+	struct kobject kobj;
+	struct list_head policy_list;
+	struct mutex update_lock;
+	int usage_count;
+};
+
+/* sysfs ops for cpufreq governors */
+extern const struct sysfs_ops governor_sysfs_ops;
+
+void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node);
+void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node);
+unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node);
+
+/* Governor sysfs attribute */
+struct governor_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct gov_attr_set *attr_set, char *buf);
+	ssize_t (*store)(struct gov_attr_set *attr_set, const char *buf,
+			 size_t count);
+};
+
 /*********************************************************************
  *                     FREQUENCY TABLE HELPERS                       *
  *********************************************************************/
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 6fa02a20eb63387e5b56866dc52c6a8287eb210f..2de4e2eea180d133898980f87c659f86a7fb922b 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -19,6 +19,13 @@
 
 #define DEVFREQ_NAME_LEN 16
 
+/* DEVFREQ notifier interface */
+#define DEVFREQ_TRANSITION_NOTIFIER	(0)
+
+/* Transition notifiers of DEVFREQ_TRANSITION_NOTIFIER */
+#define	DEVFREQ_PRECHANGE		(0)
+#define DEVFREQ_POSTCHANGE		(1)
+
 struct devfreq;
 
 /**
@@ -143,6 +150,7 @@ struct devfreq_governor {
  * @trans_table:	Statistics of devfreq transitions
  * @time_in_state:	Statistics of devfreq states
  * @last_stat_updated:	The last time stat updated
+ * @transition_notifier_list: list head of DEVFREQ_TRANSITION_NOTIFIER notifier
  *
  * This structure stores the devfreq information for a give device.
  *
@@ -177,6 +185,13 @@ struct devfreq {
 	unsigned int *trans_table;
 	unsigned long *time_in_state;
 	unsigned long last_stat_updated;
+
+	struct srcu_notifier_head transition_notifier_list;
+};
+
+struct devfreq_freqs {
+	unsigned long old;
+	unsigned long new;
 };
 
 #if defined(CONFIG_PM_DEVFREQ)
@@ -207,6 +222,22 @@ extern int devm_devfreq_register_opp_notifier(struct device *dev,
 					      struct devfreq *devfreq);
 extern void devm_devfreq_unregister_opp_notifier(struct device *dev,
 						struct devfreq *devfreq);
+extern int devfreq_register_notifier(struct devfreq *devfreq,
+					struct notifier_block *nb,
+					unsigned int list);
+extern int devfreq_unregister_notifier(struct devfreq *devfreq,
+					struct notifier_block *nb,
+					unsigned int list);
+extern int devm_devfreq_register_notifier(struct device *dev,
+				struct devfreq *devfreq,
+				struct notifier_block *nb,
+				unsigned int list);
+extern void devm_devfreq_unregister_notifier(struct device *dev,
+				struct devfreq *devfreq,
+				struct notifier_block *nb,
+				unsigned int list);
+extern struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev,
+						int index);
 
 /**
  * devfreq_update_stats() - update the last_status pointer in struct devfreq
@@ -241,6 +272,39 @@ struct devfreq_simple_ondemand_data {
 };
 #endif
 
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE)
+/**
+ * struct devfreq_passive_data - void *data fed to struct devfreq
+ *	and devfreq_add_device
+ * @parent:	the devfreq instance of parent device.
+ * @get_target_freq:	Optional callback, Returns desired operating frequency
+ *			for the device using passive governor. That is called
+ *			when passive governor should decide the next frequency
+ *			by using the new frequency of parent devfreq device
+ *			using governors except for passive governor.
+ *			If the devfreq device has the specific method to decide
+ *			the next frequency, should use this callback.
+ * @this:	the devfreq instance of own device.
+ * @nb:		the notifier block for DEVFREQ_TRANSITION_NOTIFIER list
+ *
+ * The devfreq_passive_data have to set the devfreq instance of parent
+ * device with governors except for the passive governor. But, don't need to
+ * initialize the 'this' and 'nb' field because the devfreq core will handle
+ * them.
+ */
+struct devfreq_passive_data {
+	/* Should set the devfreq instance of parent device */
+	struct devfreq *parent;
+
+	/* Optional callback to decide the next frequency of passvice device */
+	int (*get_target_freq)(struct devfreq *this, unsigned long *freq);
+
+	/* For passive governor's internal use. Don't need to set them */
+	struct devfreq *this;
+	struct notifier_block nb;
+};
+#endif
+
 #else /* !CONFIG_PM_DEVFREQ */
 static inline struct devfreq *devfreq_add_device(struct device *dev,
 					  struct devfreq_dev_profile *profile,
@@ -307,6 +371,41 @@ static inline void devm_devfreq_unregister_opp_notifier(struct device *dev,
 {
 }
 
+static inline int devfreq_register_notifier(struct devfreq *devfreq,
+					struct notifier_block *nb,
+					unsigned int list)
+{
+	return 0;
+}
+
+static inline int devfreq_unregister_notifier(struct devfreq *devfreq,
+					struct notifier_block *nb,
+					unsigned int list)
+{
+	return 0;
+}
+
+static inline int devm_devfreq_register_notifier(struct device *dev,
+				struct devfreq *devfreq,
+				struct notifier_block *nb,
+				unsigned int list)
+{
+	return 0;
+}
+
+static inline void devm_devfreq_unregister_notifier(struct device *dev,
+				struct devfreq *devfreq,
+				struct notifier_block *nb,
+				unsigned int list)
+{
+}
+
+static inline struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev,
+							int index)
+{
+	return ERR_PTR(-ENODEV);
+}
+
 static inline int devfreq_update_stats(struct devfreq *df)
 {
 	return -EINVAL;
diff --git a/include/linux/device.h b/include/linux/device.h
index 002c59728dbe6012c5eac53c3f6a1eb885b8af05..b130304f9b1bb6a45ee4f379a2eff2cbac204530 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -956,11 +956,6 @@ static inline bool device_async_suspend_enabled(struct device *dev)
 	return !!dev->power.async_suspend;
 }
 
-static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
-{
-	dev->power.ignore_children = enable;
-}
-
 static inline void dev_pm_syscore_device(struct device *dev, bool val)
 {
 #ifdef CONFIG_PM_SLEEP
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 6a5d654f444726abc824d9d07377ad66e86c6a44..06eb353182abe681dad71f100f3f26bd934ac1b2 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -563,7 +563,6 @@ struct dev_pm_info {
 	bool			is_suspended:1;	/* Ditto */
 	bool			is_noirq_suspended:1;
 	bool			is_late_suspended:1;
-	bool			ignore_children:1;
 	bool			early_init:1;	/* Owned by the PM core */
 	bool			direct_complete:1;	/* Owned by the PM core */
 	spinlock_t		lock;
@@ -591,6 +590,7 @@ struct dev_pm_info {
 	unsigned int		deferred_resume:1;
 	unsigned int		run_wake:1;
 	unsigned int		runtime_auto:1;
+	bool			ignore_children:1;
 	unsigned int		no_callbacks:1;
 	unsigned int		irq_safe:1;
 	unsigned int		use_autosuspend:1;
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 49cd8890b87348a7b0246a320ff80dd54d7232a7..39285c7bd3f5c913382ed47cb5a9882db1516fa4 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -28,14 +28,12 @@ enum gpd_status {
 
 struct dev_power_governor {
 	bool (*power_down_ok)(struct dev_pm_domain *domain);
-	bool (*stop_ok)(struct device *dev);
+	bool (*suspend_ok)(struct device *dev);
 };
 
 struct gpd_dev_ops {
 	int (*start)(struct device *dev);
 	int (*stop)(struct device *dev);
-	int (*save_state)(struct device *dev);
-	int (*restore_state)(struct device *dev);
 	bool (*active_wakeup)(struct device *dev);
 };
 
@@ -94,7 +92,7 @@ struct gpd_timing_data {
 	s64 resume_latency_ns;
 	s64 effective_constraint_ns;
 	bool constraint_changed;
-	bool cached_stop_ok;
+	bool cached_suspend_ok;
 };
 
 struct pm_domain_data {
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index cccaf4a29e9f02c9a60b65f73a523a69efa5af3a..bca26157f5b695fa1d2b6381800ad660faf972f5 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -65,6 +65,10 @@ void dev_pm_opp_put_prop_name(struct device *dev);
 int dev_pm_opp_set_regulator(struct device *dev, const char *name);
 void dev_pm_opp_put_regulator(struct device *dev);
 int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask);
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask);
+void dev_pm_opp_remove_table(struct device *dev);
+void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask);
 #else
 static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 {
@@ -109,25 +113,25 @@ static inline struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev)
 static inline struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
 					unsigned long freq, bool available)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 static inline struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 					unsigned long *freq)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
 					unsigned long *freq)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 static inline int dev_pm_opp_add(struct device *dev, unsigned long freq,
 					unsigned long u_volt)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_remove(struct device *dev, unsigned long freq)
@@ -147,73 +151,85 @@ static inline int dev_pm_opp_disable(struct device *dev, unsigned long freq)
 static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
 							struct device *dev)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 static inline int dev_pm_opp_set_supported_hw(struct device *dev,
 					      const u32 *versions,
 					      unsigned int count)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_put_supported_hw(struct device *dev) {}
 
 static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_put_prop_name(struct device *dev) {}
 
 static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_put_regulator(struct device *dev) {}
 
 static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+{
+	return -ENOTSUPP;
+}
+
+static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask)
+{
+	return -ENOTSUPP;
+}
+
+static inline int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
 {
 	return -EINVAL;
 }
 
+static inline void dev_pm_opp_remove_table(struct device *dev)
+{
+}
+
+static inline void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask)
+{
+}
+
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
 int dev_pm_opp_of_add_table(struct device *dev);
 void dev_pm_opp_of_remove_table(struct device *dev);
-int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask);
-void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask);
-int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
-int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
+int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask);
+void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask);
+int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask);
 #else
 static inline int dev_pm_opp_of_add_table(struct device *dev)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_of_remove_table(struct device *dev)
 {
 }
 
-static inline int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
-{
-	return -ENOSYS;
-}
-
-static inline void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
+static inline int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask)
 {
+	return -ENOTSUPP;
 }
 
-static inline int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask)
 {
-	return -ENOSYS;
 }
 
-static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
 {
-	return -ENOSYS;
+	return -ENOTSUPP;
 }
 #endif
 
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 7af093d6a4dd16016ef5699ec2b593dda1902e06..2e14d2667b6cb82af01145fe52e9ed828beb6812 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -56,6 +56,11 @@ extern void pm_runtime_update_max_time_suspended(struct device *dev,
 						 s64 delta_ns);
 extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable);
 
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+	dev->power.ignore_children = enable;
+}
+
 static inline bool pm_children_suspended(struct device *dev)
 {
 	return dev->power.ignore_children
@@ -156,6 +161,7 @@ static inline void __pm_runtime_disable(struct device *dev, bool c) {}
 static inline void pm_runtime_allow(struct device *dev) {}
 static inline void pm_runtime_forbid(struct device *dev) {}
 
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable) {}
 static inline bool pm_children_suspended(struct device *dev) { return false; }
 static inline void pm_runtime_get_noresume(struct device *dev) {}
 static inline void pm_runtime_put_noidle(struct device *dev) {}
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 6cc0df970f1adf31381997886bbf750758b35a4c..31bd0d97d1787159ebec62571eee292da5398440 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -3351,7 +3351,10 @@ struct update_util_data {
 		     u64 time, unsigned long util, unsigned long max);
 };
 
-void cpufreq_set_update_util_data(int cpu, struct update_util_data *data);
+void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
+			void (*func)(struct update_util_data *data, u64 time,
+				     unsigned long util, unsigned long max));
+void cpufreq_remove_update_util_hook(int cpu);
 #endif /* CONFIG_CPU_FREQ */
 
 #endif
diff --git a/kernel/sched/Makefile b/kernel/sched/Makefile
index 414d9c16da4210183af3b30ca20176f6f8397c43..5e59b832ae2b4b7447de17c105da19890763826d 100644
--- a/kernel/sched/Makefile
+++ b/kernel/sched/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_SCHEDSTATS) += stats.o
 obj-$(CONFIG_SCHED_DEBUG) += debug.o
 obj-$(CONFIG_CGROUP_CPUACCT) += cpuacct.o
 obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) += cpufreq_schedutil.o
diff --git a/kernel/sched/cpufreq.c b/kernel/sched/cpufreq.c
index 928c4ba32f683022be6388c99b4df418e9db3ca8..1141954e73b46cf1104e179e6ec1a7ace530d87e 100644
--- a/kernel/sched/cpufreq.c
+++ b/kernel/sched/cpufreq.c
@@ -14,24 +14,50 @@
 DEFINE_PER_CPU(struct update_util_data *, cpufreq_update_util_data);
 
 /**
- * cpufreq_set_update_util_data - Populate the CPU's update_util_data pointer.
+ * cpufreq_add_update_util_hook - Populate the CPU's update_util_data pointer.
  * @cpu: The CPU to set the pointer for.
  * @data: New pointer value.
+ * @func: Callback function to set for the CPU.
  *
- * Set and publish the update_util_data pointer for the given CPU.  That pointer
- * points to a struct update_util_data object containing a callback function
- * to call from cpufreq_update_util().  That function will be called from an RCU
- * read-side critical section, so it must not sleep.
+ * Set and publish the update_util_data pointer for the given CPU.
  *
- * Callers must use RCU-sched callbacks to free any memory that might be
- * accessed via the old update_util_data pointer or invoke synchronize_sched()
- * right after this function to avoid use-after-free.
+ * The update_util_data pointer of @cpu is set to @data and the callback
+ * function pointer in the target struct update_util_data is set to @func.
+ * That function will be called by cpufreq_update_util() from RCU-sched
+ * read-side critical sections, so it must not sleep.  @data will always be
+ * passed to it as the first argument which allows the function to get to the
+ * target update_util_data structure and its container.
+ *
+ * The update_util_data pointer of @cpu must be NULL when this function is
+ * called or it will WARN() and return with no effect.
  */
-void cpufreq_set_update_util_data(int cpu, struct update_util_data *data)
+void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
+			void (*func)(struct update_util_data *data, u64 time,
+				     unsigned long util, unsigned long max))
 {
-	if (WARN_ON(data && !data->func))
+	if (WARN_ON(!data || !func))
 		return;
 
+	if (WARN_ON(per_cpu(cpufreq_update_util_data, cpu)))
+		return;
+
+	data->func = func;
 	rcu_assign_pointer(per_cpu(cpufreq_update_util_data, cpu), data);
 }
-EXPORT_SYMBOL_GPL(cpufreq_set_update_util_data);
+EXPORT_SYMBOL_GPL(cpufreq_add_update_util_hook);
+
+/**
+ * cpufreq_remove_update_util_hook - Clear the CPU's update_util_data pointer.
+ * @cpu: The CPU to clear the pointer for.
+ *
+ * Clear the update_util_data pointer for the given CPU.
+ *
+ * Callers must use RCU-sched callbacks to free any memory that might be
+ * accessed via the old update_util_data pointer or invoke synchronize_sched()
+ * right after this function to avoid use-after-free.
+ */
+void cpufreq_remove_update_util_hook(int cpu)
+{
+	rcu_assign_pointer(per_cpu(cpufreq_update_util_data, cpu), NULL);
+}
+EXPORT_SYMBOL_GPL(cpufreq_remove_update_util_hook);
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
new file mode 100644
index 0000000000000000000000000000000000000000..154ae3a51e8664edd68959611947a808d3c6475f
--- /dev/null
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -0,0 +1,530 @@
+/*
+ * CPUFreq governor based on scheduler-provided CPU utilization data.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <trace/events/power.h>
+
+#include "sched.h"
+
+struct sugov_tunables {
+	struct gov_attr_set attr_set;
+	unsigned int rate_limit_us;
+};
+
+struct sugov_policy {
+	struct cpufreq_policy *policy;
+
+	struct sugov_tunables *tunables;
+	struct list_head tunables_hook;
+
+	raw_spinlock_t update_lock;  /* For shared policies */
+	u64 last_freq_update_time;
+	s64 freq_update_delay_ns;
+	unsigned int next_freq;
+
+	/* The next fields are only needed if fast switch cannot be used. */
+	struct irq_work irq_work;
+	struct work_struct work;
+	struct mutex work_lock;
+	bool work_in_progress;
+
+	bool need_freq_update;
+};
+
+struct sugov_cpu {
+	struct update_util_data update_util;
+	struct sugov_policy *sg_policy;
+
+	/* The fields below are only needed when sharing a policy. */
+	unsigned long util;
+	unsigned long max;
+	u64 last_update;
+};
+
+static DEFINE_PER_CPU(struct sugov_cpu, sugov_cpu);
+
+/************************ Governor internals ***********************/
+
+static bool sugov_should_update_freq(struct sugov_policy *sg_policy, u64 time)
+{
+	s64 delta_ns;
+
+	if (sg_policy->work_in_progress)
+		return false;
+
+	if (unlikely(sg_policy->need_freq_update)) {
+		sg_policy->need_freq_update = false;
+		/*
+		 * This happens when limits change, so forget the previous
+		 * next_freq value and force an update.
+		 */
+		sg_policy->next_freq = UINT_MAX;
+		return true;
+	}
+
+	delta_ns = time - sg_policy->last_freq_update_time;
+	return delta_ns >= sg_policy->freq_update_delay_ns;
+}
+
+static void sugov_update_commit(struct sugov_policy *sg_policy, u64 time,
+				unsigned int next_freq)
+{
+	struct cpufreq_policy *policy = sg_policy->policy;
+
+	sg_policy->last_freq_update_time = time;
+
+	if (policy->fast_switch_enabled) {
+		if (sg_policy->next_freq == next_freq) {
+			trace_cpu_frequency(policy->cur, smp_processor_id());
+			return;
+		}
+		sg_policy->next_freq = next_freq;
+		next_freq = cpufreq_driver_fast_switch(policy, next_freq);
+		if (next_freq == CPUFREQ_ENTRY_INVALID)
+			return;
+
+		policy->cur = next_freq;
+		trace_cpu_frequency(next_freq, smp_processor_id());
+	} else if (sg_policy->next_freq != next_freq) {
+		sg_policy->next_freq = next_freq;
+		sg_policy->work_in_progress = true;
+		irq_work_queue(&sg_policy->irq_work);
+	}
+}
+
+/**
+ * get_next_freq - Compute a new frequency for a given cpufreq policy.
+ * @policy: cpufreq policy object to compute the new frequency for.
+ * @util: Current CPU utilization.
+ * @max: CPU capacity.
+ *
+ * If the utilization is frequency-invariant, choose the new frequency to be
+ * proportional to it, that is
+ *
+ * next_freq = C * max_freq * util / max
+ *
+ * Otherwise, approximate the would-be frequency-invariant utilization by
+ * util_raw * (curr_freq / max_freq) which leads to
+ *
+ * next_freq = C * curr_freq * util_raw / max
+ *
+ * Take C = 1.25 for the frequency tipping point at (util / max) = 0.8.
+ */
+static unsigned int get_next_freq(struct cpufreq_policy *policy,
+				  unsigned long util, unsigned long max)
+{
+	unsigned int freq = arch_scale_freq_invariant() ?
+				policy->cpuinfo.max_freq : policy->cur;
+
+	return (freq + (freq >> 2)) * util / max;
+}
+
+static void sugov_update_single(struct update_util_data *hook, u64 time,
+				unsigned long util, unsigned long max)
+{
+	struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
+	struct sugov_policy *sg_policy = sg_cpu->sg_policy;
+	struct cpufreq_policy *policy = sg_policy->policy;
+	unsigned int next_f;
+
+	if (!sugov_should_update_freq(sg_policy, time))
+		return;
+
+	next_f = util == ULONG_MAX ? policy->cpuinfo.max_freq :
+			get_next_freq(policy, util, max);
+	sugov_update_commit(sg_policy, time, next_f);
+}
+
+static unsigned int sugov_next_freq_shared(struct sugov_policy *sg_policy,
+					   unsigned long util, unsigned long max)
+{
+	struct cpufreq_policy *policy = sg_policy->policy;
+	unsigned int max_f = policy->cpuinfo.max_freq;
+	u64 last_freq_update_time = sg_policy->last_freq_update_time;
+	unsigned int j;
+
+	if (util == ULONG_MAX)
+		return max_f;
+
+	for_each_cpu(j, policy->cpus) {
+		struct sugov_cpu *j_sg_cpu;
+		unsigned long j_util, j_max;
+		s64 delta_ns;
+
+		if (j == smp_processor_id())
+			continue;
+
+		j_sg_cpu = &per_cpu(sugov_cpu, j);
+		/*
+		 * If the CPU utilization was last updated before the previous
+		 * frequency update and the time elapsed between the last update
+		 * of the CPU utilization and the last frequency update is long
+		 * enough, don't take the CPU into account as it probably is
+		 * idle now.
+		 */
+		delta_ns = last_freq_update_time - j_sg_cpu->last_update;
+		if (delta_ns > TICK_NSEC)
+			continue;
+
+		j_util = j_sg_cpu->util;
+		if (j_util == ULONG_MAX)
+			return max_f;
+
+		j_max = j_sg_cpu->max;
+		if (j_util * max > j_max * util) {
+			util = j_util;
+			max = j_max;
+		}
+	}
+
+	return get_next_freq(policy, util, max);
+}
+
+static void sugov_update_shared(struct update_util_data *hook, u64 time,
+				unsigned long util, unsigned long max)
+{
+	struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
+	struct sugov_policy *sg_policy = sg_cpu->sg_policy;
+	unsigned int next_f;
+
+	raw_spin_lock(&sg_policy->update_lock);
+
+	sg_cpu->util = util;
+	sg_cpu->max = max;
+	sg_cpu->last_update = time;
+
+	if (sugov_should_update_freq(sg_policy, time)) {
+		next_f = sugov_next_freq_shared(sg_policy, util, max);
+		sugov_update_commit(sg_policy, time, next_f);
+	}
+
+	raw_spin_unlock(&sg_policy->update_lock);
+}
+
+static void sugov_work(struct work_struct *work)
+{
+	struct sugov_policy *sg_policy = container_of(work, struct sugov_policy, work);
+
+	mutex_lock(&sg_policy->work_lock);
+	__cpufreq_driver_target(sg_policy->policy, sg_policy->next_freq,
+				CPUFREQ_RELATION_L);
+	mutex_unlock(&sg_policy->work_lock);
+
+	sg_policy->work_in_progress = false;
+}
+
+static void sugov_irq_work(struct irq_work *irq_work)
+{
+	struct sugov_policy *sg_policy;
+
+	sg_policy = container_of(irq_work, struct sugov_policy, irq_work);
+	schedule_work_on(smp_processor_id(), &sg_policy->work);
+}
+
+/************************** sysfs interface ************************/
+
+static struct sugov_tunables *global_tunables;
+static DEFINE_MUTEX(global_tunables_lock);
+
+static inline struct sugov_tunables *to_sugov_tunables(struct gov_attr_set *attr_set)
+{
+	return container_of(attr_set, struct sugov_tunables, attr_set);
+}
+
+static ssize_t rate_limit_us_show(struct gov_attr_set *attr_set, char *buf)
+{
+	struct sugov_tunables *tunables = to_sugov_tunables(attr_set);
+
+	return sprintf(buf, "%u\n", tunables->rate_limit_us);
+}
+
+static ssize_t rate_limit_us_store(struct gov_attr_set *attr_set, const char *buf,
+				   size_t count)
+{
+	struct sugov_tunables *tunables = to_sugov_tunables(attr_set);
+	struct sugov_policy *sg_policy;
+	unsigned int rate_limit_us;
+
+	if (kstrtouint(buf, 10, &rate_limit_us))
+		return -EINVAL;
+
+	tunables->rate_limit_us = rate_limit_us;
+
+	list_for_each_entry(sg_policy, &attr_set->policy_list, tunables_hook)
+		sg_policy->freq_update_delay_ns = rate_limit_us * NSEC_PER_USEC;
+
+	return count;
+}
+
+static struct governor_attr rate_limit_us = __ATTR_RW(rate_limit_us);
+
+static struct attribute *sugov_attributes[] = {
+	&rate_limit_us.attr,
+	NULL
+};
+
+static struct kobj_type sugov_tunables_ktype = {
+	.default_attrs = sugov_attributes,
+	.sysfs_ops = &governor_sysfs_ops,
+};
+
+/********************** cpufreq governor interface *********************/
+
+static struct cpufreq_governor schedutil_gov;
+
+static struct sugov_policy *sugov_policy_alloc(struct cpufreq_policy *policy)
+{
+	struct sugov_policy *sg_policy;
+
+	sg_policy = kzalloc(sizeof(*sg_policy), GFP_KERNEL);
+	if (!sg_policy)
+		return NULL;
+
+	sg_policy->policy = policy;
+	init_irq_work(&sg_policy->irq_work, sugov_irq_work);
+	INIT_WORK(&sg_policy->work, sugov_work);
+	mutex_init(&sg_policy->work_lock);
+	raw_spin_lock_init(&sg_policy->update_lock);
+	return sg_policy;
+}
+
+static void sugov_policy_free(struct sugov_policy *sg_policy)
+{
+	mutex_destroy(&sg_policy->work_lock);
+	kfree(sg_policy);
+}
+
+static struct sugov_tunables *sugov_tunables_alloc(struct sugov_policy *sg_policy)
+{
+	struct sugov_tunables *tunables;
+
+	tunables = kzalloc(sizeof(*tunables), GFP_KERNEL);
+	if (tunables) {
+		gov_attr_set_init(&tunables->attr_set, &sg_policy->tunables_hook);
+		if (!have_governor_per_policy())
+			global_tunables = tunables;
+	}
+	return tunables;
+}
+
+static void sugov_tunables_free(struct sugov_tunables *tunables)
+{
+	if (!have_governor_per_policy())
+		global_tunables = NULL;
+
+	kfree(tunables);
+}
+
+static int sugov_init(struct cpufreq_policy *policy)
+{
+	struct sugov_policy *sg_policy;
+	struct sugov_tunables *tunables;
+	unsigned int lat;
+	int ret = 0;
+
+	/* State should be equivalent to EXIT */
+	if (policy->governor_data)
+		return -EBUSY;
+
+	sg_policy = sugov_policy_alloc(policy);
+	if (!sg_policy)
+		return -ENOMEM;
+
+	mutex_lock(&global_tunables_lock);
+
+	if (global_tunables) {
+		if (WARN_ON(have_governor_per_policy())) {
+			ret = -EINVAL;
+			goto free_sg_policy;
+		}
+		policy->governor_data = sg_policy;
+		sg_policy->tunables = global_tunables;
+
+		gov_attr_set_get(&global_tunables->attr_set, &sg_policy->tunables_hook);
+		goto out;
+	}
+
+	tunables = sugov_tunables_alloc(sg_policy);
+	if (!tunables) {
+		ret = -ENOMEM;
+		goto free_sg_policy;
+	}
+
+	tunables->rate_limit_us = LATENCY_MULTIPLIER;
+	lat = policy->cpuinfo.transition_latency / NSEC_PER_USEC;
+	if (lat)
+		tunables->rate_limit_us *= lat;
+
+	policy->governor_data = sg_policy;
+	sg_policy->tunables = tunables;
+
+	ret = kobject_init_and_add(&tunables->attr_set.kobj, &sugov_tunables_ktype,
+				   get_governor_parent_kobj(policy), "%s",
+				   schedutil_gov.name);
+	if (ret)
+		goto fail;
+
+ out:
+	mutex_unlock(&global_tunables_lock);
+
+	cpufreq_enable_fast_switch(policy);
+	return 0;
+
+ fail:
+	policy->governor_data = NULL;
+	sugov_tunables_free(tunables);
+
+ free_sg_policy:
+	mutex_unlock(&global_tunables_lock);
+
+	sugov_policy_free(sg_policy);
+	pr_err("cpufreq: schedutil governor initialization failed (error %d)\n", ret);
+	return ret;
+}
+
+static int sugov_exit(struct cpufreq_policy *policy)
+{
+	struct sugov_policy *sg_policy = policy->governor_data;
+	struct sugov_tunables *tunables = sg_policy->tunables;
+	unsigned int count;
+
+	cpufreq_disable_fast_switch(policy);
+
+	mutex_lock(&global_tunables_lock);
+
+	count = gov_attr_set_put(&tunables->attr_set, &sg_policy->tunables_hook);
+	policy->governor_data = NULL;
+	if (!count)
+		sugov_tunables_free(tunables);
+
+	mutex_unlock(&global_tunables_lock);
+
+	sugov_policy_free(sg_policy);
+	return 0;
+}
+
+static int sugov_start(struct cpufreq_policy *policy)
+{
+	struct sugov_policy *sg_policy = policy->governor_data;
+	unsigned int cpu;
+
+	sg_policy->freq_update_delay_ns = sg_policy->tunables->rate_limit_us * NSEC_PER_USEC;
+	sg_policy->last_freq_update_time = 0;
+	sg_policy->next_freq = UINT_MAX;
+	sg_policy->work_in_progress = false;
+	sg_policy->need_freq_update = false;
+
+	for_each_cpu(cpu, policy->cpus) {
+		struct sugov_cpu *sg_cpu = &per_cpu(sugov_cpu, cpu);
+
+		sg_cpu->sg_policy = sg_policy;
+		if (policy_is_shared(policy)) {
+			sg_cpu->util = ULONG_MAX;
+			sg_cpu->max = 0;
+			sg_cpu->last_update = 0;
+			cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util,
+						     sugov_update_shared);
+		} else {
+			cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util,
+						     sugov_update_single);
+		}
+	}
+	return 0;
+}
+
+static int sugov_stop(struct cpufreq_policy *policy)
+{
+	struct sugov_policy *sg_policy = policy->governor_data;
+	unsigned int cpu;
+
+	for_each_cpu(cpu, policy->cpus)
+		cpufreq_remove_update_util_hook(cpu);
+
+	synchronize_sched();
+
+	irq_work_sync(&sg_policy->irq_work);
+	cancel_work_sync(&sg_policy->work);
+	return 0;
+}
+
+static int sugov_limits(struct cpufreq_policy *policy)
+{
+	struct sugov_policy *sg_policy = policy->governor_data;
+
+	if (!policy->fast_switch_enabled) {
+		mutex_lock(&sg_policy->work_lock);
+
+		if (policy->max < policy->cur)
+			__cpufreq_driver_target(policy, policy->max,
+						CPUFREQ_RELATION_H);
+		else if (policy->min > policy->cur)
+			__cpufreq_driver_target(policy, policy->min,
+						CPUFREQ_RELATION_L);
+
+		mutex_unlock(&sg_policy->work_lock);
+	}
+
+	sg_policy->need_freq_update = true;
+	return 0;
+}
+
+int sugov_governor(struct cpufreq_policy *policy, unsigned int event)
+{
+	if (event == CPUFREQ_GOV_POLICY_INIT) {
+		return sugov_init(policy);
+	} else if (policy->governor_data) {
+		switch (event) {
+		case CPUFREQ_GOV_POLICY_EXIT:
+			return sugov_exit(policy);
+		case CPUFREQ_GOV_START:
+			return sugov_start(policy);
+		case CPUFREQ_GOV_STOP:
+			return sugov_stop(policy);
+		case CPUFREQ_GOV_LIMITS:
+			return sugov_limits(policy);
+		}
+	}
+	return -EINVAL;
+}
+
+static struct cpufreq_governor schedutil_gov = {
+	.name = "schedutil",
+	.governor = sugov_governor,
+	.owner = THIS_MODULE,
+};
+
+static int __init sugov_module_init(void)
+{
+	return cpufreq_register_governor(&schedutil_gov);
+}
+
+static void __exit sugov_module_exit(void)
+{
+	cpufreq_unregister_governor(&schedutil_gov);
+}
+
+MODULE_AUTHOR("Rafael J. Wysocki <rafael.j.wysocki@intel.com>");
+MODULE_DESCRIPTION("Utilization-based CPU frequency selection");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+	return &schedutil_gov;
+}
+
+fs_initcall(sugov_module_init);
+#else
+module_init(sugov_module_init);
+#endif
+module_exit(sugov_module_exit);
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index e51145e76807565f5ea5f4658bddddd40816c55c..72f1f3087b04a72fc0afc9ff81d768018eb05391 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1802,6 +1802,14 @@ static inline void cpufreq_update_util(u64 time, unsigned long util, unsigned lo
 static inline void cpufreq_trigger_update(u64 time) {}
 #endif /* CONFIG_CPU_FREQ */
 
+#ifdef arch_scale_freq_capacity
+#ifndef arch_scale_freq_invariant
+#define arch_scale_freq_invariant()	(true)
+#endif
+#else /* arch_scale_freq_capacity */
+#define arch_scale_freq_invariant()	(false)
+#endif
+
 static inline void account_reset_rq(struct rq *rq)
 {
 #ifdef CONFIG_IRQ_TIME_ACCOUNTING
diff --git a/kernel/trace/power-traces.c b/kernel/trace/power-traces.c
index 81b87451c0ea145f93ba41e47dacc6a2acec8189..0c7dee221dca4747a30eca158d4c01a3deb1c4dc 100644
--- a/kernel/trace/power-traces.c
+++ b/kernel/trace/power-traces.c
@@ -15,5 +15,6 @@
 
 EXPORT_TRACEPOINT_SYMBOL_GPL(suspend_resume);
 EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_idle);
+EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_frequency);
 EXPORT_TRACEPOINT_SYMBOL_GPL(powernv_throttle);
 
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index 0adaf0c7c03a0f47985f5d6e116ae249df64bd83..8358863259c53463d86d0578b9837b10201dc266 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -63,7 +63,7 @@ DESTDIR ?=
 # and _should_ modify the PACKAGE_BUGREPORT definition
 
 VERSION=			$(shell ./utils/version-gen.sh)
-LIB_MAJ=			0.0.0
+LIB_MAJ=			0.0.1
 LIB_MIN=			0
 
 PACKAGE =			cpupower
@@ -129,7 +129,7 @@ WARNINGS += -Wshadow
 CFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \
 		-DPACKAGE_BUGREPORT=\"$(PACKAGE_BUGREPORT)\" -D_GNU_SOURCE
 
-UTIL_OBJS =  utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \
+UTIL_OBJS =  utils/helpers/amd.o utils/helpers/msr.o \
 	utils/helpers/sysfs.o utils/helpers/misc.o utils/helpers/cpuid.o \
 	utils/helpers/pci.o utils/helpers/bitmask.o \
 	utils/idle_monitor/nhm_idle.o utils/idle_monitor/snb_idle.o \
@@ -148,9 +148,9 @@ UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \
 	utils/helpers/bitmask.h \
 	utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def
 
-LIB_HEADERS = 	lib/cpufreq.h lib/sysfs.h
-LIB_SRC = 	lib/cpufreq.c lib/sysfs.c
-LIB_OBJS = 	lib/cpufreq.o lib/sysfs.o
+LIB_HEADERS = 	lib/cpufreq.h lib/cpupower.h lib/cpuidle.h
+LIB_SRC = 	lib/cpufreq.c lib/cpupower.c lib/cpuidle.c
+LIB_OBJS = 	lib/cpufreq.o lib/cpupower.o lib/cpuidle.o
 LIB_OBJS :=	$(addprefix $(OUTPUT),$(LIB_OBJS))
 
 CFLAGS +=	-pipe
@@ -280,6 +280,7 @@ install-lib:
 	$(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/
 	$(INSTALL) -d $(DESTDIR)${includedir}
 	$(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h
+	$(INSTALL_DATA) lib/cpuidle.h $(DESTDIR)${includedir}/cpuidle.h
 
 install-tools:
 	$(INSTALL) -d $(DESTDIR)${bindir}
@@ -315,6 +316,7 @@ endif
 uninstall:
 	- rm -f $(DESTDIR)${libdir}/libcpupower.*
 	- rm -f $(DESTDIR)${includedir}/cpufreq.h
+	- rm -f $(DESTDIR)${includedir}/cpuidle.h
 	- rm -f $(DESTDIR)${bindir}/utils/cpupower
 	- rm -f $(DESTDIR)${mandir}/man1/cpupower.1
 	- rm -f $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1
diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile
index d0f879b223fc24b28f5c6126f153321191afb62f..3e59f1aa3947ecfb954f767d4dd06cb54450b1de 100644
--- a/tools/power/cpupower/bench/Makefile
+++ b/tools/power/cpupower/bench/Makefile
@@ -22,7 +22,7 @@ $(OUTPUT)%.o : %.c
 
 $(OUTPUT)cpufreq-bench: $(OBJS)
 	$(ECHO) "  CC      " $@
-	$(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS)
+	$(QUIET) $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS)
 
 all: $(OUTPUT)cpufreq-bench
 
diff --git a/tools/power/cpupower/bench/README-BENCH b/tools/power/cpupower/bench/README-BENCH
index 8093ec738170f611ef4c395e76763f6c6dbfb366..97727aed61cca9801b14185bff02d23d87940546 100644
--- a/tools/power/cpupower/bench/README-BENCH
+++ b/tools/power/cpupower/bench/README-BENCH
@@ -113,7 +113,7 @@ cpufreq-bench Command Usage
 -c, --cpu=<unsigned int>        CPU Number to use, starting at 0
 -p, --prio=<priority>           scheduler priority, HIGH, LOW or DEFAULT
 -g, --governor=<governor>       cpufreq governor to test
--n, --cycles=<int>              load/sleep cycles to get an avarage value to compare
+-n, --cycles=<int>              load/sleep cycles to get an average value to compare
 -r, --rounds<int>               load/sleep rounds
 -f, --file=<configfile>         config file to use
 -o, --output=<dir>              output dir, must exist
diff --git a/tools/power/cpupower/bench/benchmark.c b/tools/power/cpupower/bench/benchmark.c
index 81b1c48607d994abeb26433cb58fb915b7af68ab..429d51ab8031f7f01a1f3c301e3fb1948cc34a42 100644
--- a/tools/power/cpupower/bench/benchmark.c
+++ b/tools/power/cpupower/bench/benchmark.c
@@ -130,7 +130,7 @@ void start_benchmark(struct config *config)
 			_round, load_time, sleep_time);
 
 		if (config->verbose)
-			printf("avarage: %lius, rps:%li\n",
+			printf("average: %lius, rps:%li\n",
 				load_time / calculations,
 				1000000 * calculations / load_time);
 
@@ -177,7 +177,7 @@ void start_benchmark(struct config *config)
 
 		progress_time += sleep_time + load_time;
 
-		/* compare the avarage sleep/load cycles  */
+		/* compare the average sleep/load cycles  */
 		fprintf(config->output, "%li ",
 			powersave_time / config->cycles);
 		fprintf(config->output, "%.3f\n",
diff --git a/tools/power/cpupower/bench/parse.c b/tools/power/cpupower/bench/parse.c
index f503fb53824ede11ab4c7ade033d877088ff3a21..9b65f052081f354d594ed319eccfe57874bfaa77 100644
--- a/tools/power/cpupower/bench/parse.c
+++ b/tools/power/cpupower/bench/parse.c
@@ -65,7 +65,7 @@ FILE *prepare_output(const char *dirname)
 {
 	FILE *output = NULL;
 	int len;
-	char *filename;
+	char *filename, *filename_tmp;
 	struct utsname sysdata;
 	DIR *dir;
 
@@ -81,16 +81,22 @@ FILE *prepare_output(const char *dirname)
 
 	len = strlen(dirname) + 30;
 	filename = malloc(sizeof(char) * len);
+	if (!filename) {
+		perror("malloc");
+		goto out_dir;
+	}
 
 	if (uname(&sysdata) == 0) {
 		len += strlen(sysdata.nodename) + strlen(sysdata.release);
-		filename = realloc(filename, sizeof(char) * len);
+		filename_tmp = realloc(filename, sizeof(*filename) * len);
 
-		if (filename == NULL) {
+		if (filename_tmp == NULL) {
+			free(filename);
 			perror("realloc");
-			return NULL;
+			goto out_dir;
 		}
 
+		filename = filename_tmp;
 		snprintf(filename, len - 1, "%s/benchmark_%s_%s_%li.log",
 			dirname, sysdata.nodename, sysdata.release, time(NULL));
 	} else {
@@ -104,12 +110,16 @@ FILE *prepare_output(const char *dirname)
 	if (output == NULL) {
 		perror("fopen");
 		fprintf(stderr, "error: unable to open logfile\n");
+		goto out;
 	}
 
 	fprintf(stdout, "Logfile: %s\n", filename);
 
-	free(filename);
 	fprintf(output, "#round load sleep performance powersave percentage\n");
+out:
+	free(filename);
+out_dir:
+	closedir(dir);
 	return output;
 }
 
diff --git a/tools/power/cpupower/bench/system.c b/tools/power/cpupower/bench/system.c
index f01e3f4be84cd00b2a9814293df375c67667621e..c25a74ae51baef13bfa5609d2957af76941597f6 100644
--- a/tools/power/cpupower/bench/system.c
+++ b/tools/power/cpupower/bench/system.c
@@ -26,6 +26,7 @@
 #include <sched.h>
 
 #include <cpufreq.h>
+#include <cpupower.h>
 
 #include "config.h"
 #include "system.h"
@@ -60,7 +61,7 @@ int set_cpufreq_governor(char *governor, unsigned int cpu)
 
 	dprintf("set %s as cpufreq governor\n", governor);
 
-	if (cpufreq_cpu_exists(cpu) != 0) {
+	if (cpupower_is_cpu_online(cpu) != 0) {
 		perror("cpufreq_cpu_exists");
 		fprintf(stderr, "error: cpu %u does not exist\n", cpu);
 		return -1;
diff --git a/tools/power/cpupower/lib/cpufreq.c b/tools/power/cpupower/lib/cpufreq.c
index d961101d1cea15c5d544139d56b8fba9add4cf8f..1b993fe1ce2372a5e6fed1d057b6b2a1dc64d5d6 100644
--- a/tools/power/cpupower/lib/cpufreq.c
+++ b/tools/power/cpupower/lib/cpufreq.c
@@ -9,28 +9,190 @@
 #include <errno.h>
 #include <stdlib.h>
 #include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
 
 #include "cpufreq.h"
-#include "sysfs.h"
+#include "cpupower_intern.h"
 
-int cpufreq_cpu_exists(unsigned int cpu)
+/* CPUFREQ sysfs access **************************************************/
+
+/* helper function to read file from /sys into given buffer */
+/* fname is a relative path under "cpuX/cpufreq" dir */
+static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname,
+					    char *buf, size_t buflen)
 {
-	return sysfs_cpu_exists(cpu);
+	char path[SYSFS_PATH_MAX];
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
+			 cpu, fname);
+	return sysfs_read_file(path, buf, buflen);
 }
 
+/* helper function to write a new value to a /sys file */
+/* fname is a relative path under "cpuX/cpufreq" dir */
+static unsigned int sysfs_cpufreq_write_file(unsigned int cpu,
+					     const char *fname,
+					     const char *value, size_t len)
+{
+	char path[SYSFS_PATH_MAX];
+	int fd;
+	ssize_t numwrite;
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
+			 cpu, fname);
+
+	fd = open(path, O_WRONLY);
+	if (fd == -1)
+		return 0;
+
+	numwrite = write(fd, value, len);
+	if (numwrite < 1) {
+		close(fd);
+		return 0;
+	}
+
+	close(fd);
+
+	return (unsigned int) numwrite;
+}
+
+/* read access to files which contain one numeric value */
+
+enum cpufreq_value {
+	CPUINFO_CUR_FREQ,
+	CPUINFO_MIN_FREQ,
+	CPUINFO_MAX_FREQ,
+	CPUINFO_LATENCY,
+	SCALING_CUR_FREQ,
+	SCALING_MIN_FREQ,
+	SCALING_MAX_FREQ,
+	STATS_NUM_TRANSITIONS,
+	MAX_CPUFREQ_VALUE_READ_FILES
+};
+
+static const char *cpufreq_value_files[MAX_CPUFREQ_VALUE_READ_FILES] = {
+	[CPUINFO_CUR_FREQ] = "cpuinfo_cur_freq",
+	[CPUINFO_MIN_FREQ] = "cpuinfo_min_freq",
+	[CPUINFO_MAX_FREQ] = "cpuinfo_max_freq",
+	[CPUINFO_LATENCY]  = "cpuinfo_transition_latency",
+	[SCALING_CUR_FREQ] = "scaling_cur_freq",
+	[SCALING_MIN_FREQ] = "scaling_min_freq",
+	[SCALING_MAX_FREQ] = "scaling_max_freq",
+	[STATS_NUM_TRANSITIONS] = "stats/total_trans"
+};
+
+
+static unsigned long sysfs_cpufreq_get_one_value(unsigned int cpu,
+						 enum cpufreq_value which)
+{
+	unsigned long value;
+	unsigned int len;
+	char linebuf[MAX_LINE_LEN];
+	char *endp;
+
+	if (which >= MAX_CPUFREQ_VALUE_READ_FILES)
+		return 0;
+
+	len = sysfs_cpufreq_read_file(cpu, cpufreq_value_files[which],
+				linebuf, sizeof(linebuf));
+
+	if (len == 0)
+		return 0;
+
+	value = strtoul(linebuf, &endp, 0);
+
+	if (endp == linebuf || errno == ERANGE)
+		return 0;
+
+	return value;
+}
+
+/* read access to files which contain one string */
+
+enum cpufreq_string {
+	SCALING_DRIVER,
+	SCALING_GOVERNOR,
+	MAX_CPUFREQ_STRING_FILES
+};
+
+static const char *cpufreq_string_files[MAX_CPUFREQ_STRING_FILES] = {
+	[SCALING_DRIVER] = "scaling_driver",
+	[SCALING_GOVERNOR] = "scaling_governor",
+};
+
+
+static char *sysfs_cpufreq_get_one_string(unsigned int cpu,
+					   enum cpufreq_string which)
+{
+	char linebuf[MAX_LINE_LEN];
+	char *result;
+	unsigned int len;
+
+	if (which >= MAX_CPUFREQ_STRING_FILES)
+		return NULL;
+
+	len = sysfs_cpufreq_read_file(cpu, cpufreq_string_files[which],
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	result = strdup(linebuf);
+	if (result == NULL)
+		return NULL;
+
+	if (result[strlen(result) - 1] == '\n')
+		result[strlen(result) - 1] = '\0';
+
+	return result;
+}
+
+/* write access */
+
+enum cpufreq_write {
+	WRITE_SCALING_MIN_FREQ,
+	WRITE_SCALING_MAX_FREQ,
+	WRITE_SCALING_GOVERNOR,
+	WRITE_SCALING_SET_SPEED,
+	MAX_CPUFREQ_WRITE_FILES
+};
+
+static const char *cpufreq_write_files[MAX_CPUFREQ_WRITE_FILES] = {
+	[WRITE_SCALING_MIN_FREQ] = "scaling_min_freq",
+	[WRITE_SCALING_MAX_FREQ] = "scaling_max_freq",
+	[WRITE_SCALING_GOVERNOR] = "scaling_governor",
+	[WRITE_SCALING_SET_SPEED] = "scaling_setspeed",
+};
+
+static int sysfs_cpufreq_write_one_value(unsigned int cpu,
+					 enum cpufreq_write which,
+					 const char *new_value, size_t len)
+{
+	if (which >= MAX_CPUFREQ_WRITE_FILES)
+		return 0;
+
+	if (sysfs_cpufreq_write_file(cpu, cpufreq_write_files[which],
+					new_value, len) != len)
+		return -ENODEV;
+
+	return 0;
+};
+
 unsigned long cpufreq_get_freq_kernel(unsigned int cpu)
 {
-	return sysfs_get_freq_kernel(cpu);
+	return sysfs_cpufreq_get_one_value(cpu, SCALING_CUR_FREQ);
 }
 
 unsigned long cpufreq_get_freq_hardware(unsigned int cpu)
 {
-	return sysfs_get_freq_hardware(cpu);
+	return sysfs_cpufreq_get_one_value(cpu, CPUINFO_CUR_FREQ);
 }
 
 unsigned long cpufreq_get_transition_latency(unsigned int cpu)
 {
-	return sysfs_get_freq_transition_latency(cpu);
+	return sysfs_cpufreq_get_one_value(cpu, CPUINFO_LATENCY);
 }
 
 int cpufreq_get_hardware_limits(unsigned int cpu,
@@ -39,12 +201,21 @@ int cpufreq_get_hardware_limits(unsigned int cpu,
 {
 	if ((!min) || (!max))
 		return -EINVAL;
-	return sysfs_get_freq_hardware_limits(cpu, min, max);
+
+	*min = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MIN_FREQ);
+	if (!*min)
+		return -ENODEV;
+
+	*max = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MAX_FREQ);
+	if (!*max)
+		return -ENODEV;
+
+	return 0;
 }
 
 char *cpufreq_get_driver(unsigned int cpu)
 {
-	return sysfs_get_freq_driver(cpu);
+	return sysfs_cpufreq_get_one_string(cpu, SCALING_DRIVER);
 }
 
 void cpufreq_put_driver(char *ptr)
@@ -56,7 +227,26 @@ void cpufreq_put_driver(char *ptr)
 
 struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu)
 {
-	return sysfs_get_freq_policy(cpu);
+	struct cpufreq_policy *policy;
+
+	policy = malloc(sizeof(struct cpufreq_policy));
+	if (!policy)
+		return NULL;
+
+	policy->governor = sysfs_cpufreq_get_one_string(cpu, SCALING_GOVERNOR);
+	if (!policy->governor) {
+		free(policy);
+		return NULL;
+	}
+	policy->min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
+	policy->max = sysfs_cpufreq_get_one_value(cpu, SCALING_MAX_FREQ);
+	if ((!policy->min) || (!policy->max)) {
+		free(policy->governor);
+		free(policy);
+		return NULL;
+	}
+
+	return policy;
 }
 
 void cpufreq_put_policy(struct cpufreq_policy *policy)
@@ -72,7 +262,57 @@ void cpufreq_put_policy(struct cpufreq_policy *policy)
 struct cpufreq_available_governors *cpufreq_get_available_governors(unsigned
 								int cpu)
 {
-	return sysfs_get_freq_available_governors(cpu);
+	struct cpufreq_available_governors *first = NULL;
+	struct cpufreq_available_governors *current = NULL;
+	char linebuf[MAX_LINE_LEN];
+	unsigned int pos, i;
+	unsigned int len;
+
+	len = sysfs_cpufreq_read_file(cpu, "scaling_available_governors",
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	pos = 0;
+	for (i = 0; i < len; i++) {
+		if (linebuf[i] == ' ' || linebuf[i] == '\n') {
+			if (i - pos < 2)
+				continue;
+			if (current) {
+				current->next = malloc(sizeof(*current));
+				if (!current->next)
+					goto error_out;
+				current = current->next;
+			} else {
+				first = malloc(sizeof(*first));
+				if (!first)
+					goto error_out;
+				current = first;
+			}
+			current->first = first;
+			current->next = NULL;
+
+			current->governor = malloc(i - pos + 1);
+			if (!current->governor)
+				goto error_out;
+
+			memcpy(current->governor, linebuf + pos, i - pos);
+			current->governor[i - pos] = '\0';
+			pos = i + 1;
+		}
+	}
+
+	return first;
+
+ error_out:
+	while (first) {
+		current = first->next;
+		if (first->governor)
+			free(first->governor);
+		free(first);
+		first = current;
+	}
+	return NULL;
 }
 
 void cpufreq_put_available_governors(struct cpufreq_available_governors *any)
@@ -96,7 +336,57 @@ void cpufreq_put_available_governors(struct cpufreq_available_governors *any)
 struct cpufreq_available_frequencies
 *cpufreq_get_available_frequencies(unsigned int cpu)
 {
-	return sysfs_get_available_frequencies(cpu);
+	struct cpufreq_available_frequencies *first = NULL;
+	struct cpufreq_available_frequencies *current = NULL;
+	char one_value[SYSFS_PATH_MAX];
+	char linebuf[MAX_LINE_LEN];
+	unsigned int pos, i;
+	unsigned int len;
+
+	len = sysfs_cpufreq_read_file(cpu, "scaling_available_frequencies",
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	pos = 0;
+	for (i = 0; i < len; i++) {
+		if (linebuf[i] == ' ' || linebuf[i] == '\n') {
+			if (i - pos < 2)
+				continue;
+			if (i - pos >= SYSFS_PATH_MAX)
+				goto error_out;
+			if (current) {
+				current->next = malloc(sizeof(*current));
+				if (!current->next)
+					goto error_out;
+				current = current->next;
+			} else {
+				first = malloc(sizeof(*first));
+				if (!first)
+					goto error_out;
+				current = first;
+			}
+			current->first = first;
+			current->next = NULL;
+
+			memcpy(one_value, linebuf + pos, i - pos);
+			one_value[i - pos] = '\0';
+			if (sscanf(one_value, "%lu", &current->frequency) != 1)
+				goto error_out;
+
+			pos = i + 1;
+		}
+	}
+
+	return first;
+
+ error_out:
+	while (first) {
+		current = first->next;
+		free(first);
+		first = current;
+	}
+	return NULL;
 }
 
 void cpufreq_put_available_frequencies(struct cpufreq_available_frequencies
@@ -114,10 +404,65 @@ void cpufreq_put_available_frequencies(struct cpufreq_available_frequencies
 	}
 }
 
+static struct cpufreq_affected_cpus *sysfs_get_cpu_list(unsigned int cpu,
+							const char *file)
+{
+	struct cpufreq_affected_cpus *first = NULL;
+	struct cpufreq_affected_cpus *current = NULL;
+	char one_value[SYSFS_PATH_MAX];
+	char linebuf[MAX_LINE_LEN];
+	unsigned int pos, i;
+	unsigned int len;
+
+	len = sysfs_cpufreq_read_file(cpu, file, linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	pos = 0;
+	for (i = 0; i < len; i++) {
+		if (i == len || linebuf[i] == ' ' || linebuf[i] == '\n') {
+			if (i - pos  < 1)
+				continue;
+			if (i - pos >= SYSFS_PATH_MAX)
+				goto error_out;
+			if (current) {
+				current->next = malloc(sizeof(*current));
+				if (!current->next)
+					goto error_out;
+				current = current->next;
+			} else {
+				first = malloc(sizeof(*first));
+				if (!first)
+					goto error_out;
+				current = first;
+			}
+			current->first = first;
+			current->next = NULL;
+
+			memcpy(one_value, linebuf + pos, i - pos);
+			one_value[i - pos] = '\0';
+
+			if (sscanf(one_value, "%u", &current->cpu) != 1)
+				goto error_out;
+
+			pos = i + 1;
+		}
+	}
+
+	return first;
+
+ error_out:
+	while (first) {
+		current = first->next;
+		free(first);
+		first = current;
+	}
+	return NULL;
+}
 
 struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned int cpu)
 {
-	return sysfs_get_freq_affected_cpus(cpu);
+	return sysfs_get_cpu_list(cpu, "affected_cpus");
 }
 
 void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *any)
@@ -138,7 +483,7 @@ void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *any)
 
 struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned int cpu)
 {
-	return sysfs_get_freq_related_cpus(cpu);
+	return sysfs_get_cpu_list(cpu, "related_cpus");
 }
 
 void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *any)
@@ -146,45 +491,208 @@ void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *any)
 	cpufreq_put_affected_cpus(any);
 }
 
+static int verify_gov(char *new_gov, char *passed_gov)
+{
+	unsigned int i, j = 0;
+
+	if (!passed_gov || (strlen(passed_gov) > 19))
+		return -EINVAL;
+
+	strncpy(new_gov, passed_gov, 20);
+	for (i = 0; i < 20; i++) {
+		if (j) {
+			new_gov[i] = '\0';
+			continue;
+		}
+		if ((new_gov[i] >= 'a') && (new_gov[i] <= 'z'))
+			continue;
+
+		if ((new_gov[i] >= 'A') && (new_gov[i] <= 'Z'))
+			continue;
+
+		if (new_gov[i] == '-')
+			continue;
+
+		if (new_gov[i] == '_')
+			continue;
+
+		if (new_gov[i] == '\0') {
+			j = 1;
+			continue;
+		}
+		return -EINVAL;
+	}
+	new_gov[19] = '\0';
+	return 0;
+}
 
 int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy)
 {
+	char min[SYSFS_PATH_MAX];
+	char max[SYSFS_PATH_MAX];
+	char gov[SYSFS_PATH_MAX];
+	int ret;
+	unsigned long old_min;
+	int write_max_first;
+
 	if (!policy || !(policy->governor))
 		return -EINVAL;
 
-	return sysfs_set_freq_policy(cpu, policy);
+	if (policy->max < policy->min)
+		return -EINVAL;
+
+	if (verify_gov(gov, policy->governor))
+		return -EINVAL;
+
+	snprintf(min, SYSFS_PATH_MAX, "%lu", policy->min);
+	snprintf(max, SYSFS_PATH_MAX, "%lu", policy->max);
+
+	old_min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
+	write_max_first = (old_min && (policy->max < old_min) ? 0 : 1);
+
+	if (write_max_first) {
+		ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
+						    max, strlen(max));
+		if (ret)
+			return ret;
+	}
+
+	ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, min,
+					    strlen(min));
+	if (ret)
+		return ret;
+
+	if (!write_max_first) {
+		ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
+						    max, strlen(max));
+		if (ret)
+			return ret;
+	}
+
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
+					     gov, strlen(gov));
 }
 
 
 int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq)
 {
-	return sysfs_modify_freq_policy_min(cpu, min_freq);
+	char value[SYSFS_PATH_MAX];
+
+	snprintf(value, SYSFS_PATH_MAX, "%lu", min_freq);
+
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ,
+					     value, strlen(value));
 }
 
 
 int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq)
 {
-	return sysfs_modify_freq_policy_max(cpu, max_freq);
-}
+	char value[SYSFS_PATH_MAX];
+
+	snprintf(value, SYSFS_PATH_MAX, "%lu", max_freq);
 
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
+					     value, strlen(value));
+}
 
 int cpufreq_modify_policy_governor(unsigned int cpu, char *governor)
 {
+	char new_gov[SYSFS_PATH_MAX];
+
 	if ((!governor) || (strlen(governor) > 19))
 		return -EINVAL;
 
-	return sysfs_modify_freq_policy_governor(cpu, governor);
+	if (verify_gov(new_gov, governor))
+		return -EINVAL;
+
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
+					     new_gov, strlen(new_gov));
 }
 
 int cpufreq_set_frequency(unsigned int cpu, unsigned long target_frequency)
 {
-	return sysfs_set_frequency(cpu, target_frequency);
+	struct cpufreq_policy *pol = cpufreq_get_policy(cpu);
+	char userspace_gov[] = "userspace";
+	char freq[SYSFS_PATH_MAX];
+	int ret;
+
+	if (!pol)
+		return -ENODEV;
+
+	if (strncmp(pol->governor, userspace_gov, 9) != 0) {
+		ret = cpufreq_modify_policy_governor(cpu, userspace_gov);
+		if (ret) {
+			cpufreq_put_policy(pol);
+			return ret;
+		}
+	}
+
+	cpufreq_put_policy(pol);
+
+	snprintf(freq, SYSFS_PATH_MAX, "%lu", target_frequency);
+
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_SET_SPEED,
+					     freq, strlen(freq));
 }
 
 struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu,
 					unsigned long long *total_time)
 {
-	return sysfs_get_freq_stats(cpu, total_time);
+	struct cpufreq_stats *first = NULL;
+	struct cpufreq_stats *current = NULL;
+	char one_value[SYSFS_PATH_MAX];
+	char linebuf[MAX_LINE_LEN];
+	unsigned int pos, i;
+	unsigned int len;
+
+	len = sysfs_cpufreq_read_file(cpu, "stats/time_in_state",
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	*total_time = 0;
+	pos = 0;
+	for (i = 0; i < len; i++) {
+		if (i == strlen(linebuf) || linebuf[i] == '\n')	{
+			if (i - pos < 2)
+				continue;
+			if ((i - pos) >= SYSFS_PATH_MAX)
+				goto error_out;
+			if (current) {
+				current->next = malloc(sizeof(*current));
+				if (!current->next)
+					goto error_out;
+				current = current->next;
+			} else {
+				first = malloc(sizeof(*first));
+				if (!first)
+					goto error_out;
+				current = first;
+			}
+			current->first = first;
+			current->next = NULL;
+
+			memcpy(one_value, linebuf + pos, i - pos);
+			one_value[i - pos] = '\0';
+			if (sscanf(one_value, "%lu %llu",
+					&current->frequency,
+					&current->time_in_state) != 2)
+				goto error_out;
+
+			*total_time = *total_time + current->time_in_state;
+			pos = i + 1;
+		}
+	}
+
+	return first;
+
+ error_out:
+	while (first) {
+		current = first->next;
+		free(first);
+		first = current;
+	}
+	return NULL;
 }
 
 void cpufreq_put_stats(struct cpufreq_stats *any)
@@ -204,5 +712,5 @@ void cpufreq_put_stats(struct cpufreq_stats *any)
 
 unsigned long cpufreq_get_transitions(unsigned int cpu)
 {
-	return sysfs_get_freq_transitions(cpu);
+	return sysfs_cpufreq_get_one_value(cpu, STATS_NUM_TRANSITIONS);
 }
diff --git a/tools/power/cpupower/lib/cpufreq.h b/tools/power/cpupower/lib/cpufreq.h
index 3aae8e7a083940ae6b5a961402d3515d265cc98c..3b005c39f068fdc6426b10173acf9ee7d1c372c6 100644
--- a/tools/power/cpupower/lib/cpufreq.h
+++ b/tools/power/cpupower/lib/cpufreq.h
@@ -17,8 +17,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#ifndef _CPUFREQ_H
-#define _CPUFREQ_H 1
+#ifndef __CPUPOWER_CPUFREQ_H__
+#define __CPUPOWER_CPUFREQ_H__
 
 struct cpufreq_policy {
 	unsigned long min;
@@ -58,13 +58,6 @@ struct cpufreq_stats {
 extern "C" {
 #endif
 
-/*
- * returns 0 if the specified CPU is present (it doesn't say
- * whether it is online!), and an error value if not.
- */
-
-extern int cpufreq_cpu_exists(unsigned int cpu);
-
 /* determine current CPU frequency
  * - _kernel variant means kernel's opinion of CPU frequency
  * - _hardware variant means actual hardware CPU frequency,
@@ -73,9 +66,9 @@ extern int cpufreq_cpu_exists(unsigned int cpu);
  * returns 0 on failure, else frequency in kHz.
  */
 
-extern unsigned long cpufreq_get_freq_kernel(unsigned int cpu);
+unsigned long cpufreq_get_freq_kernel(unsigned int cpu);
 
-extern unsigned long cpufreq_get_freq_hardware(unsigned int cpu);
+unsigned long cpufreq_get_freq_hardware(unsigned int cpu);
 
 #define cpufreq_get(cpu) cpufreq_get_freq_kernel(cpu);
 
@@ -84,7 +77,7 @@ extern unsigned long cpufreq_get_freq_hardware(unsigned int cpu);
  *
  * returns 0 on failure, else transition latency in 10^(-9) s = nanoseconds
  */
-extern unsigned long cpufreq_get_transition_latency(unsigned int cpu);
+unsigned long cpufreq_get_transition_latency(unsigned int cpu);
 
 
 /* determine hardware CPU frequency limits
@@ -93,7 +86,7 @@ extern unsigned long cpufreq_get_transition_latency(unsigned int cpu);
  * considerations by cpufreq policy notifiers in the kernel.
  */
 
-extern int cpufreq_get_hardware_limits(unsigned int cpu,
+int cpufreq_get_hardware_limits(unsigned int cpu,
 				unsigned long *min,
 				unsigned long *max);
 
@@ -104,9 +97,9 @@ extern int cpufreq_get_hardware_limits(unsigned int cpu,
  * to avoid memory leakage, please.
  */
 
-extern char *cpufreq_get_driver(unsigned int cpu);
+char *cpufreq_get_driver(unsigned int cpu);
 
-extern void cpufreq_put_driver(char *ptr);
+void cpufreq_put_driver(char *ptr);
 
 
 /* determine CPUfreq policy currently used
@@ -116,9 +109,9 @@ extern void cpufreq_put_driver(char *ptr);
  */
 
 
-extern struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu);
+struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu);
 
-extern void cpufreq_put_policy(struct cpufreq_policy *policy);
+void cpufreq_put_policy(struct cpufreq_policy *policy);
 
 
 /* determine CPUfreq governors currently available
@@ -129,10 +122,10 @@ extern void cpufreq_put_policy(struct cpufreq_policy *policy);
  */
 
 
-extern struct cpufreq_available_governors
+struct cpufreq_available_governors
 *cpufreq_get_available_governors(unsigned int cpu);
 
-extern void cpufreq_put_available_governors(
+void cpufreq_put_available_governors(
 	struct cpufreq_available_governors *first);
 
 
@@ -143,10 +136,10 @@ extern void cpufreq_put_available_governors(
  * cpufreq_put_available_frequencies after use.
  */
 
-extern struct cpufreq_available_frequencies
+struct cpufreq_available_frequencies
 *cpufreq_get_available_frequencies(unsigned int cpu);
 
-extern void cpufreq_put_available_frequencies(
+void cpufreq_put_available_frequencies(
 		struct cpufreq_available_frequencies *first);
 
 
@@ -156,10 +149,10 @@ extern void cpufreq_put_available_frequencies(
  * to avoid memory leakage, please.
  */
 
-extern struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned
+struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned
 							int cpu);
 
-extern void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first);
+void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first);
 
 
 /* determine related CPUs
@@ -168,10 +161,10 @@ extern void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first);
  * to avoid memory leakage, please.
  */
 
-extern struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned
+struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned
 							int cpu);
 
-extern void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first);
+void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first);
 
 
 /* determine stats for cpufreq subsystem
@@ -179,12 +172,12 @@ extern void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first);
  * This is not available in all kernel versions or configurations.
  */
 
-extern struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu,
+struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu,
 					unsigned long long *total_time);
 
-extern void cpufreq_put_stats(struct cpufreq_stats *stats);
+void cpufreq_put_stats(struct cpufreq_stats *stats);
 
-extern unsigned long cpufreq_get_transitions(unsigned int cpu);
+unsigned long cpufreq_get_transitions(unsigned int cpu);
 
 
 /* set new cpufreq policy
@@ -193,7 +186,7 @@ extern unsigned long cpufreq_get_transitions(unsigned int cpu);
  * but results may differ depending e.g. on governors being available.
  */
 
-extern int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy);
+int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy);
 
 
 /* modify a policy by only changing min/max freq or governor
@@ -201,9 +194,9 @@ extern int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy);
  * Does not check whether result is what was intended.
  */
 
-extern int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq);
-extern int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq);
-extern int cpufreq_modify_policy_governor(unsigned int cpu, char *governor);
+int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq);
+int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq);
+int cpufreq_modify_policy_governor(unsigned int cpu, char *governor);
 
 
 /* set a specific frequency
@@ -213,7 +206,7 @@ extern int cpufreq_modify_policy_governor(unsigned int cpu, char *governor);
  * occurs. Also does not work on ->range() cpufreq drivers.
  */
 
-extern int cpufreq_set_frequency(unsigned int cpu,
+int cpufreq_set_frequency(unsigned int cpu,
 				unsigned long target_frequency);
 
 #ifdef __cplusplus
diff --git a/tools/power/cpupower/lib/cpuidle.c b/tools/power/cpupower/lib/cpuidle.c
new file mode 100644
index 0000000000000000000000000000000000000000..9bd4c7655fdb2a4942d6aa0012174f232e25ee4f
--- /dev/null
+++ b/tools/power/cpupower/lib/cpuidle.c
@@ -0,0 +1,380 @@
+/*
+ *  (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
+ *  (C) 2011       Thomas Renninger <trenn@novell.com> Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include "cpuidle.h"
+#include "cpupower_intern.h"
+
+/*
+ * helper function to check whether a file under "../cpuX/cpuidle/stateX/" dir
+ * exists.
+ * For example the functionality to disable c-states was introduced in later
+ * kernel versions, this function can be used to explicitly check for this
+ * feature.
+ *
+ * returns 1 if the file exists, 0 otherwise.
+ */
+static
+unsigned int cpuidle_state_file_exists(unsigned int cpu,
+				       unsigned int idlestate,
+				       const char *fname)
+{
+	char path[SYSFS_PATH_MAX];
+	struct stat statbuf;
+
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s",
+		 cpu, idlestate, fname);
+	if (stat(path, &statbuf) != 0)
+		return 0;
+	return 1;
+}
+
+/*
+ * helper function to read file from /sys into given buffer
+ * fname is a relative path under "cpuX/cpuidle/stateX/" dir
+ * cstates starting with 0, C0 is not counted as cstate.
+ * This means if you want C1 info, pass 0 as idlestate param
+ */
+static
+unsigned int cpuidle_state_read_file(unsigned int cpu,
+					    unsigned int idlestate,
+					    const char *fname, char *buf,
+					    size_t buflen)
+{
+	char path[SYSFS_PATH_MAX];
+	int fd;
+	ssize_t numread;
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s",
+		 cpu, idlestate, fname);
+
+	fd = open(path, O_RDONLY);
+	if (fd == -1)
+		return 0;
+
+	numread = read(fd, buf, buflen - 1);
+	if (numread < 1) {
+		close(fd);
+		return 0;
+	}
+
+	buf[numread] = '\0';
+	close(fd);
+
+	return (unsigned int) numread;
+}
+
+/*
+ * helper function to write a new value to a /sys file
+ * fname is a relative path under "../cpuX/cpuidle/cstateY/" dir
+ *
+ * Returns the number of bytes written or 0 on error
+ */
+static
+unsigned int cpuidle_state_write_file(unsigned int cpu,
+				      unsigned int idlestate,
+				      const char *fname,
+				      const char *value, size_t len)
+{
+	char path[SYSFS_PATH_MAX];
+	int fd;
+	ssize_t numwrite;
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s",
+		 cpu, idlestate, fname);
+
+	fd = open(path, O_WRONLY);
+	if (fd == -1)
+		return 0;
+
+	numwrite = write(fd, value, len);
+	if (numwrite < 1) {
+		close(fd);
+		return 0;
+	}
+
+	close(fd);
+
+	return (unsigned int) numwrite;
+}
+
+/* read access to files which contain one numeric value */
+
+enum idlestate_value {
+	IDLESTATE_USAGE,
+	IDLESTATE_POWER,
+	IDLESTATE_LATENCY,
+	IDLESTATE_TIME,
+	IDLESTATE_DISABLE,
+	MAX_IDLESTATE_VALUE_FILES
+};
+
+static const char *idlestate_value_files[MAX_IDLESTATE_VALUE_FILES] = {
+	[IDLESTATE_USAGE] = "usage",
+	[IDLESTATE_POWER] = "power",
+	[IDLESTATE_LATENCY] = "latency",
+	[IDLESTATE_TIME]  = "time",
+	[IDLESTATE_DISABLE]  = "disable",
+};
+
+static
+unsigned long long cpuidle_state_get_one_value(unsigned int cpu,
+					       unsigned int idlestate,
+					       enum idlestate_value which)
+{
+	unsigned long long value;
+	unsigned int len;
+	char linebuf[MAX_LINE_LEN];
+	char *endp;
+
+	if (which >= MAX_IDLESTATE_VALUE_FILES)
+		return 0;
+
+	len = cpuidle_state_read_file(cpu, idlestate,
+				      idlestate_value_files[which],
+				      linebuf, sizeof(linebuf));
+	if (len == 0)
+		return 0;
+
+	value = strtoull(linebuf, &endp, 0);
+
+	if (endp == linebuf || errno == ERANGE)
+		return 0;
+
+	return value;
+}
+
+/* read access to files which contain one string */
+
+enum idlestate_string {
+	IDLESTATE_DESC,
+	IDLESTATE_NAME,
+	MAX_IDLESTATE_STRING_FILES
+};
+
+static const char *idlestate_string_files[MAX_IDLESTATE_STRING_FILES] = {
+	[IDLESTATE_DESC] = "desc",
+	[IDLESTATE_NAME] = "name",
+};
+
+
+static char *cpuidle_state_get_one_string(unsigned int cpu,
+					unsigned int idlestate,
+					enum idlestate_string which)
+{
+	char linebuf[MAX_LINE_LEN];
+	char *result;
+	unsigned int len;
+
+	if (which >= MAX_IDLESTATE_STRING_FILES)
+		return NULL;
+
+	len = cpuidle_state_read_file(cpu, idlestate,
+				      idlestate_string_files[which],
+				      linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	result = strdup(linebuf);
+	if (result == NULL)
+		return NULL;
+
+	if (result[strlen(result) - 1] == '\n')
+		result[strlen(result) - 1] = '\0';
+
+	return result;
+}
+
+/*
+ * Returns:
+ *    1  if disabled
+ *    0  if enabled
+ *    -1 if idlestate is not available
+ *    -2 if disabling is not supported by the kernel
+ */
+int cpuidle_is_state_disabled(unsigned int cpu,
+				unsigned int idlestate)
+{
+	if (cpuidle_state_count(cpu) <= idlestate)
+		return -1;
+
+	if (!cpuidle_state_file_exists(cpu, idlestate,
+				 idlestate_value_files[IDLESTATE_DISABLE]))
+		return -2;
+	return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_DISABLE);
+}
+
+/*
+ * Pass 1 as last argument to disable or 0 to enable the state
+ * Returns:
+ *    0  on success
+ *    negative values on error, for example:
+ *      -1 if idlestate is not available
+ *      -2 if disabling is not supported by the kernel
+ *      -3 No write access to disable/enable C-states
+ */
+int cpuidle_state_disable(unsigned int cpu,
+			    unsigned int idlestate,
+			    unsigned int disable)
+{
+	char value[SYSFS_PATH_MAX];
+	int bytes_written;
+
+	if (cpuidle_state_count(cpu) <= idlestate)
+		return -1;
+
+	if (!cpuidle_state_file_exists(cpu, idlestate,
+				 idlestate_value_files[IDLESTATE_DISABLE]))
+		return -2;
+
+	snprintf(value, SYSFS_PATH_MAX, "%u", disable);
+
+	bytes_written = cpuidle_state_write_file(cpu, idlestate, "disable",
+						   value, sizeof(disable));
+	if (bytes_written)
+		return 0;
+	return -3;
+}
+
+unsigned long cpuidle_state_latency(unsigned int cpu,
+					  unsigned int idlestate)
+{
+	return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_LATENCY);
+}
+
+unsigned long cpuidle_state_usage(unsigned int cpu,
+					unsigned int idlestate)
+{
+	return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_USAGE);
+}
+
+unsigned long long cpuidle_state_time(unsigned int cpu,
+					unsigned int idlestate)
+{
+	return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_TIME);
+}
+
+char *cpuidle_state_name(unsigned int cpu, unsigned int idlestate)
+{
+	return cpuidle_state_get_one_string(cpu, idlestate, IDLESTATE_NAME);
+}
+
+char *cpuidle_state_desc(unsigned int cpu, unsigned int idlestate)
+{
+	return cpuidle_state_get_one_string(cpu, idlestate, IDLESTATE_DESC);
+}
+
+/*
+ * Returns number of supported C-states of CPU core cpu
+ * Negativ in error case
+ * Zero if cpuidle does not export any C-states
+ */
+unsigned int cpuidle_state_count(unsigned int cpu)
+{
+	char file[SYSFS_PATH_MAX];
+	struct stat statbuf;
+	int idlestates = 1;
+
+
+	snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpuidle");
+	if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))
+		return 0;
+
+	snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/cpuidle/state0", cpu);
+	if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))
+		return 0;
+
+	while (stat(file, &statbuf) == 0 && S_ISDIR(statbuf.st_mode)) {
+		snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU
+			 "cpu%u/cpuidle/state%d", cpu, idlestates);
+		idlestates++;
+	}
+	idlestates--;
+	return idlestates;
+}
+
+/* CPUidle general /sys/devices/system/cpu/cpuidle/ sysfs access ********/
+
+/*
+ * helper function to read file from /sys into given buffer
+ * fname is a relative path under "cpu/cpuidle/" dir
+ */
+static unsigned int sysfs_cpuidle_read_file(const char *fname, char *buf,
+					    size_t buflen)
+{
+	char path[SYSFS_PATH_MAX];
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpuidle/%s", fname);
+
+	return sysfs_read_file(path, buf, buflen);
+}
+
+
+
+/* read access to files which contain one string */
+
+enum cpuidle_string {
+	CPUIDLE_GOVERNOR,
+	CPUIDLE_GOVERNOR_RO,
+	CPUIDLE_DRIVER,
+	MAX_CPUIDLE_STRING_FILES
+};
+
+static const char *cpuidle_string_files[MAX_CPUIDLE_STRING_FILES] = {
+	[CPUIDLE_GOVERNOR]	= "current_governor",
+	[CPUIDLE_GOVERNOR_RO]	= "current_governor_ro",
+	[CPUIDLE_DRIVER]	= "current_driver",
+};
+
+
+static char *sysfs_cpuidle_get_one_string(enum cpuidle_string which)
+{
+	char linebuf[MAX_LINE_LEN];
+	char *result;
+	unsigned int len;
+
+	if (which >= MAX_CPUIDLE_STRING_FILES)
+		return NULL;
+
+	len = sysfs_cpuidle_read_file(cpuidle_string_files[which],
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	result = strdup(linebuf);
+	if (result == NULL)
+		return NULL;
+
+	if (result[strlen(result) - 1] == '\n')
+		result[strlen(result) - 1] = '\0';
+
+	return result;
+}
+
+char *cpuidle_get_governor(void)
+{
+	char *tmp = sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR_RO);
+	if (!tmp)
+		return sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR);
+	else
+		return tmp;
+}
+
+char *cpuidle_get_driver(void)
+{
+	return sysfs_cpuidle_get_one_string(CPUIDLE_DRIVER);
+}
+/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */
diff --git a/tools/power/cpupower/lib/cpuidle.h b/tools/power/cpupower/lib/cpuidle.h
new file mode 100644
index 0000000000000000000000000000000000000000..04eb3cfa6e42908b05359416cc943098b1389be1
--- /dev/null
+++ b/tools/power/cpupower/lib/cpuidle.h
@@ -0,0 +1,23 @@
+#ifndef __CPUPOWER_CPUIDLE_H__
+#define __CPUPOWER_CPUIDLE_H__
+
+int cpuidle_is_state_disabled(unsigned int cpu,
+				       unsigned int idlestate);
+int cpuidle_state_disable(unsigned int cpu, unsigned int idlestate,
+				   unsigned int disable);
+unsigned long cpuidle_state_latency(unsigned int cpu,
+						unsigned int idlestate);
+unsigned long cpuidle_state_usage(unsigned int cpu,
+					unsigned int idlestate);
+unsigned long long cpuidle_state_time(unsigned int cpu,
+						unsigned int idlestate);
+char *cpuidle_state_name(unsigned int cpu,
+				unsigned int idlestate);
+char *cpuidle_state_desc(unsigned int cpu,
+				unsigned int idlestate);
+unsigned int cpuidle_state_count(unsigned int cpu);
+
+char *cpuidle_get_governor(void);
+char *cpuidle_get_driver(void);
+
+#endif /* __CPUPOWER_HELPERS_SYSFS_H__ */
diff --git a/tools/power/cpupower/lib/cpupower.c b/tools/power/cpupower/lib/cpupower.c
new file mode 100644
index 0000000000000000000000000000000000000000..9c395ec924def2538e973eab7724472eea34cb8d
--- /dev/null
+++ b/tools/power/cpupower/lib/cpupower.c
@@ -0,0 +1,192 @@
+/*
+ *  (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+
+#include "cpupower.h"
+#include "cpupower_intern.h"
+
+unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen)
+{
+	int fd;
+	ssize_t numread;
+
+	fd = open(path, O_RDONLY);
+	if (fd == -1)
+		return 0;
+
+	numread = read(fd, buf, buflen - 1);
+	if (numread < 1) {
+		close(fd);
+		return 0;
+	}
+
+	buf[numread] = '\0';
+	close(fd);
+
+	return (unsigned int) numread;
+}
+
+/*
+ * Detect whether a CPU is online
+ *
+ * Returns:
+ *     1 -> if CPU is online
+ *     0 -> if CPU is offline
+ *     negative errno values in error case
+ */
+int cpupower_is_cpu_online(unsigned int cpu)
+{
+	char path[SYSFS_PATH_MAX];
+	int fd;
+	ssize_t numread;
+	unsigned long long value;
+	char linebuf[MAX_LINE_LEN];
+	char *endp;
+	struct stat statbuf;
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u", cpu);
+
+	if (stat(path, &statbuf) != 0)
+		return 0;
+
+	/*
+	 * kernel without CONFIG_HOTPLUG_CPU
+	 * -> cpuX directory exists, but not cpuX/online file
+	 */
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/online", cpu);
+	if (stat(path, &statbuf) != 0)
+		return 1;
+
+	fd = open(path, O_RDONLY);
+	if (fd == -1)
+		return -errno;
+
+	numread = read(fd, linebuf, MAX_LINE_LEN - 1);
+	if (numread < 1) {
+		close(fd);
+		return -EIO;
+	}
+	linebuf[numread] = '\0';
+	close(fd);
+
+	value = strtoull(linebuf, &endp, 0);
+	if (value > 1)
+		return -EINVAL;
+
+	return value;
+}
+
+/* returns -1 on failure, 0 on success */
+static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *result)
+{
+	char linebuf[MAX_LINE_LEN];
+	char *endp;
+	char path[SYSFS_PATH_MAX];
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s",
+			 cpu, fname);
+	if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0)
+		return -1;
+	*result = strtol(linebuf, &endp, 0);
+	if (endp == linebuf || errno == ERANGE)
+		return -1;
+	return 0;
+}
+
+static int __compare(const void *t1, const void *t2)
+{
+	struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1;
+	struct cpuid_core_info *top2 = (struct cpuid_core_info *)t2;
+	if (top1->pkg < top2->pkg)
+		return -1;
+	else if (top1->pkg > top2->pkg)
+		return 1;
+	else if (top1->core < top2->core)
+		return -1;
+	else if (top1->core > top2->core)
+		return 1;
+	else if (top1->cpu < top2->cpu)
+		return -1;
+	else if (top1->cpu > top2->cpu)
+		return 1;
+	else
+		return 0;
+}
+
+/*
+ * Returns amount of cpus, negative on error, cpu_top must be
+ * passed to cpu_topology_release to free resources
+ *
+ * Array is sorted after ->pkg, ->core, then ->cpu
+ */
+int get_cpu_topology(struct cpupower_topology *cpu_top)
+{
+	int cpu, last_pkg, cpus = sysconf(_SC_NPROCESSORS_CONF);
+
+	cpu_top->core_info = malloc(sizeof(struct cpuid_core_info) * cpus);
+	if (cpu_top->core_info == NULL)
+		return -ENOMEM;
+	cpu_top->pkgs = cpu_top->cores = 0;
+	for (cpu = 0; cpu < cpus; cpu++) {
+		cpu_top->core_info[cpu].cpu = cpu;
+		cpu_top->core_info[cpu].is_online = cpupower_is_cpu_online(cpu);
+		if(sysfs_topology_read_file(
+			cpu,
+			"physical_package_id",
+			&(cpu_top->core_info[cpu].pkg)) < 0) {
+			cpu_top->core_info[cpu].pkg = -1;
+			cpu_top->core_info[cpu].core = -1;
+			continue;
+		}
+		if(sysfs_topology_read_file(
+			cpu,
+			"core_id",
+			&(cpu_top->core_info[cpu].core)) < 0) {
+			cpu_top->core_info[cpu].pkg = -1;
+			cpu_top->core_info[cpu].core = -1;
+			continue;
+		}
+	}
+
+	qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info),
+	      __compare);
+
+	/* Count the number of distinct pkgs values. This works
+	   because the primary sort of the core_info struct was just
+	   done by pkg value. */
+	last_pkg = cpu_top->core_info[0].pkg;
+	for(cpu = 1; cpu < cpus; cpu++) {
+		if (cpu_top->core_info[cpu].pkg != last_pkg &&
+				cpu_top->core_info[cpu].pkg != -1) {
+
+			last_pkg = cpu_top->core_info[cpu].pkg;
+			cpu_top->pkgs++;
+		}
+	}
+	if (!(cpu_top->core_info[0].pkg == -1))
+		cpu_top->pkgs++;
+
+	/* Intel's cores count is not consecutively numbered, there may
+	 * be a core_id of 3, but none of 2. Assume there always is 0
+	 * Get amount of cores by counting duplicates in a package
+	for (cpu = 0; cpu_top->core_info[cpu].pkg = 0 && cpu < cpus; cpu++) {
+		if (cpu_top->core_info[cpu].core == 0)
+	cpu_top->cores++;
+	*/
+	return cpus;
+}
+
+void cpu_topology_release(struct cpupower_topology cpu_top)
+{
+	free(cpu_top.core_info);
+}
diff --git a/tools/power/cpupower/lib/cpupower.h b/tools/power/cpupower/lib/cpupower.h
new file mode 100644
index 0000000000000000000000000000000000000000..fa031fcc771081ff49d871d9baf76bbed5154222
--- /dev/null
+++ b/tools/power/cpupower/lib/cpupower.h
@@ -0,0 +1,35 @@
+#ifndef __CPUPOWER_CPUPOWER_H__
+#define __CPUPOWER_CPUPOWER_H__
+
+struct cpupower_topology {
+	/* Amount of CPU cores, packages and threads per core in the system */
+	unsigned int cores;
+	unsigned int pkgs;
+	unsigned int threads; /* per core */
+
+	/* Array gets mallocated with cores entries, holding per core info */
+	struct cpuid_core_info *core_info;
+};
+
+struct cpuid_core_info {
+	int pkg;
+	int core;
+	int cpu;
+
+	/* flags */
+	unsigned int is_online:1;
+};
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+int get_cpu_topology(struct cpupower_topology *cpu_top);
+void cpu_topology_release(struct cpupower_topology cpu_top);
+int cpupower_is_cpu_online(unsigned int cpu);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/tools/power/cpupower/lib/cpupower_intern.h b/tools/power/cpupower/lib/cpupower_intern.h
new file mode 100644
index 0000000000000000000000000000000000000000..f8ec4009621ca2139226df4b62e702a103ca5f07
--- /dev/null
+++ b/tools/power/cpupower/lib/cpupower_intern.h
@@ -0,0 +1,5 @@
+#define PATH_TO_CPU "/sys/devices/system/cpu/"
+#define MAX_LINE_LEN 4096
+#define SYSFS_PATH_MAX 255
+
+unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen);
diff --git a/tools/power/cpupower/lib/sysfs.c b/tools/power/cpupower/lib/sysfs.c
deleted file mode 100644
index 870713a75a81c458256c0f589223cb9926635b6f..0000000000000000000000000000000000000000
--- a/tools/power/cpupower/lib/sysfs.c
+++ /dev/null
@@ -1,672 +0,0 @@
-/*
- *  (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
- *
- *  Licensed under the terms of the GNU GPL License version 2.
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <string.h>
-#include <limits.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-#include "cpufreq.h"
-
-#define PATH_TO_CPU "/sys/devices/system/cpu/"
-#define MAX_LINE_LEN 4096
-#define SYSFS_PATH_MAX 255
-
-
-static unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen)
-{
-	int fd;
-	ssize_t numread;
-
-	fd = open(path, O_RDONLY);
-	if (fd == -1)
-		return 0;
-
-	numread = read(fd, buf, buflen - 1);
-	if (numread < 1) {
-		close(fd);
-		return 0;
-	}
-
-	buf[numread] = '\0';
-	close(fd);
-
-	return (unsigned int) numread;
-}
-
-
-/* CPUFREQ sysfs access **************************************************/
-
-/* helper function to read file from /sys into given buffer */
-/* fname is a relative path under "cpuX/cpufreq" dir */
-static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname,
-					    char *buf, size_t buflen)
-{
-	char path[SYSFS_PATH_MAX];
-
-	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
-			 cpu, fname);
-	return sysfs_read_file(path, buf, buflen);
-}
-
-/* helper function to write a new value to a /sys file */
-/* fname is a relative path under "cpuX/cpufreq" dir */
-static unsigned int sysfs_cpufreq_write_file(unsigned int cpu,
-					     const char *fname,
-					     const char *value, size_t len)
-{
-	char path[SYSFS_PATH_MAX];
-	int fd;
-	ssize_t numwrite;
-
-	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
-			 cpu, fname);
-
-	fd = open(path, O_WRONLY);
-	if (fd == -1)
-		return 0;
-
-	numwrite = write(fd, value, len);
-	if (numwrite < 1) {
-		close(fd);
-		return 0;
-	}
-
-	close(fd);
-
-	return (unsigned int) numwrite;
-}
-
-/* read access to files which contain one numeric value */
-
-enum cpufreq_value {
-	CPUINFO_CUR_FREQ,
-	CPUINFO_MIN_FREQ,
-	CPUINFO_MAX_FREQ,
-	CPUINFO_LATENCY,
-	SCALING_CUR_FREQ,
-	SCALING_MIN_FREQ,
-	SCALING_MAX_FREQ,
-	STATS_NUM_TRANSITIONS,
-	MAX_CPUFREQ_VALUE_READ_FILES
-};
-
-static const char *cpufreq_value_files[MAX_CPUFREQ_VALUE_READ_FILES] = {
-	[CPUINFO_CUR_FREQ] = "cpuinfo_cur_freq",
-	[CPUINFO_MIN_FREQ] = "cpuinfo_min_freq",
-	[CPUINFO_MAX_FREQ] = "cpuinfo_max_freq",
-	[CPUINFO_LATENCY]  = "cpuinfo_transition_latency",
-	[SCALING_CUR_FREQ] = "scaling_cur_freq",
-	[SCALING_MIN_FREQ] = "scaling_min_freq",
-	[SCALING_MAX_FREQ] = "scaling_max_freq",
-	[STATS_NUM_TRANSITIONS] = "stats/total_trans"
-};
-
-
-static unsigned long sysfs_cpufreq_get_one_value(unsigned int cpu,
-						 enum cpufreq_value which)
-{
-	unsigned long value;
-	unsigned int len;
-	char linebuf[MAX_LINE_LEN];
-	char *endp;
-
-	if (which >= MAX_CPUFREQ_VALUE_READ_FILES)
-		return 0;
-
-	len = sysfs_cpufreq_read_file(cpu, cpufreq_value_files[which],
-				linebuf, sizeof(linebuf));
-
-	if (len == 0)
-		return 0;
-
-	value = strtoul(linebuf, &endp, 0);
-
-	if (endp == linebuf || errno == ERANGE)
-		return 0;
-
-	return value;
-}
-
-/* read access to files which contain one string */
-
-enum cpufreq_string {
-	SCALING_DRIVER,
-	SCALING_GOVERNOR,
-	MAX_CPUFREQ_STRING_FILES
-};
-
-static const char *cpufreq_string_files[MAX_CPUFREQ_STRING_FILES] = {
-	[SCALING_DRIVER] = "scaling_driver",
-	[SCALING_GOVERNOR] = "scaling_governor",
-};
-
-
-static char *sysfs_cpufreq_get_one_string(unsigned int cpu,
-					   enum cpufreq_string which)
-{
-	char linebuf[MAX_LINE_LEN];
-	char *result;
-	unsigned int len;
-
-	if (which >= MAX_CPUFREQ_STRING_FILES)
-		return NULL;
-
-	len = sysfs_cpufreq_read_file(cpu, cpufreq_string_files[which],
-				linebuf, sizeof(linebuf));
-	if (len == 0)
-		return NULL;
-
-	result = strdup(linebuf);
-	if (result == NULL)
-		return NULL;
-
-	if (result[strlen(result) - 1] == '\n')
-		result[strlen(result) - 1] = '\0';
-
-	return result;
-}
-
-/* write access */
-
-enum cpufreq_write {
-	WRITE_SCALING_MIN_FREQ,
-	WRITE_SCALING_MAX_FREQ,
-	WRITE_SCALING_GOVERNOR,
-	WRITE_SCALING_SET_SPEED,
-	MAX_CPUFREQ_WRITE_FILES
-};
-
-static const char *cpufreq_write_files[MAX_CPUFREQ_WRITE_FILES] = {
-	[WRITE_SCALING_MIN_FREQ] = "scaling_min_freq",
-	[WRITE_SCALING_MAX_FREQ] = "scaling_max_freq",
-	[WRITE_SCALING_GOVERNOR] = "scaling_governor",
-	[WRITE_SCALING_SET_SPEED] = "scaling_setspeed",
-};
-
-static int sysfs_cpufreq_write_one_value(unsigned int cpu,
-					 enum cpufreq_write which,
-					 const char *new_value, size_t len)
-{
-	if (which >= MAX_CPUFREQ_WRITE_FILES)
-		return 0;
-
-	if (sysfs_cpufreq_write_file(cpu, cpufreq_write_files[which],
-					new_value, len) != len)
-		return -ENODEV;
-
-	return 0;
-};
-
-unsigned long sysfs_get_freq_kernel(unsigned int cpu)
-{
-	return sysfs_cpufreq_get_one_value(cpu, SCALING_CUR_FREQ);
-}
-
-unsigned long sysfs_get_freq_hardware(unsigned int cpu)
-{
-	return sysfs_cpufreq_get_one_value(cpu, CPUINFO_CUR_FREQ);
-}
-
-unsigned long sysfs_get_freq_transition_latency(unsigned int cpu)
-{
-	return sysfs_cpufreq_get_one_value(cpu, CPUINFO_LATENCY);
-}
-
-int sysfs_get_freq_hardware_limits(unsigned int cpu,
-			      unsigned long *min,
-			      unsigned long *max)
-{
-	if ((!min) || (!max))
-		return -EINVAL;
-
-	*min = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MIN_FREQ);
-	if (!*min)
-		return -ENODEV;
-
-	*max = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MAX_FREQ);
-	if (!*max)
-		return -ENODEV;
-
-	return 0;
-}
-
-char *sysfs_get_freq_driver(unsigned int cpu)
-{
-	return sysfs_cpufreq_get_one_string(cpu, SCALING_DRIVER);
-}
-
-struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu)
-{
-	struct cpufreq_policy *policy;
-
-	policy = malloc(sizeof(struct cpufreq_policy));
-	if (!policy)
-		return NULL;
-
-	policy->governor = sysfs_cpufreq_get_one_string(cpu, SCALING_GOVERNOR);
-	if (!policy->governor) {
-		free(policy);
-		return NULL;
-	}
-	policy->min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
-	policy->max = sysfs_cpufreq_get_one_value(cpu, SCALING_MAX_FREQ);
-	if ((!policy->min) || (!policy->max)) {
-		free(policy->governor);
-		free(policy);
-		return NULL;
-	}
-
-	return policy;
-}
-
-struct cpufreq_available_governors *
-sysfs_get_freq_available_governors(unsigned int cpu) {
-	struct cpufreq_available_governors *first = NULL;
-	struct cpufreq_available_governors *current = NULL;
-	char linebuf[MAX_LINE_LEN];
-	unsigned int pos, i;
-	unsigned int len;
-
-	len = sysfs_cpufreq_read_file(cpu, "scaling_available_governors",
-				linebuf, sizeof(linebuf));
-	if (len == 0)
-		return NULL;
-
-	pos = 0;
-	for (i = 0; i < len; i++) {
-		if (linebuf[i] == ' ' || linebuf[i] == '\n') {
-			if (i - pos < 2)
-				continue;
-			if (current) {
-				current->next = malloc(sizeof(*current));
-				if (!current->next)
-					goto error_out;
-				current = current->next;
-			} else {
-				first = malloc(sizeof(*first));
-				if (!first)
-					goto error_out;
-				current = first;
-			}
-			current->first = first;
-			current->next = NULL;
-
-			current->governor = malloc(i - pos + 1);
-			if (!current->governor)
-				goto error_out;
-
-			memcpy(current->governor, linebuf + pos, i - pos);
-			current->governor[i - pos] = '\0';
-			pos = i + 1;
-		}
-	}
-
-	return first;
-
- error_out:
-	while (first) {
-		current = first->next;
-		if (first->governor)
-			free(first->governor);
-		free(first);
-		first = current;
-	}
-	return NULL;
-}
-
-
-struct cpufreq_available_frequencies *
-sysfs_get_available_frequencies(unsigned int cpu) {
-	struct cpufreq_available_frequencies *first = NULL;
-	struct cpufreq_available_frequencies *current = NULL;
-	char one_value[SYSFS_PATH_MAX];
-	char linebuf[MAX_LINE_LEN];
-	unsigned int pos, i;
-	unsigned int len;
-
-	len = sysfs_cpufreq_read_file(cpu, "scaling_available_frequencies",
-				linebuf, sizeof(linebuf));
-	if (len == 0)
-		return NULL;
-
-	pos = 0;
-	for (i = 0; i < len; i++) {
-		if (linebuf[i] == ' ' || linebuf[i] == '\n') {
-			if (i - pos < 2)
-				continue;
-			if (i - pos >= SYSFS_PATH_MAX)
-				goto error_out;
-			if (current) {
-				current->next = malloc(sizeof(*current));
-				if (!current->next)
-					goto error_out;
-				current = current->next;
-			} else {
-				first = malloc(sizeof(*first));
-				if (!first)
-					goto error_out;
-				current = first;
-			}
-			current->first = first;
-			current->next = NULL;
-
-			memcpy(one_value, linebuf + pos, i - pos);
-			one_value[i - pos] = '\0';
-			if (sscanf(one_value, "%lu", &current->frequency) != 1)
-				goto error_out;
-
-			pos = i + 1;
-		}
-	}
-
-	return first;
-
- error_out:
-	while (first) {
-		current = first->next;
-		free(first);
-		first = current;
-	}
-	return NULL;
-}
-
-static struct cpufreq_affected_cpus *sysfs_get_cpu_list(unsigned int cpu,
-							const char *file)
-{
-	struct cpufreq_affected_cpus *first = NULL;
-	struct cpufreq_affected_cpus *current = NULL;
-	char one_value[SYSFS_PATH_MAX];
-	char linebuf[MAX_LINE_LEN];
-	unsigned int pos, i;
-	unsigned int len;
-
-	len = sysfs_cpufreq_read_file(cpu, file, linebuf, sizeof(linebuf));
-	if (len == 0)
-		return NULL;
-
-	pos = 0;
-	for (i = 0; i < len; i++) {
-		if (i == len || linebuf[i] == ' ' || linebuf[i] == '\n') {
-			if (i - pos  < 1)
-				continue;
-			if (i - pos >= SYSFS_PATH_MAX)
-				goto error_out;
-			if (current) {
-				current->next = malloc(sizeof(*current));
-				if (!current->next)
-					goto error_out;
-				current = current->next;
-			} else {
-				first = malloc(sizeof(*first));
-				if (!first)
-					goto error_out;
-				current = first;
-			}
-			current->first = first;
-			current->next = NULL;
-
-			memcpy(one_value, linebuf + pos, i - pos);
-			one_value[i - pos] = '\0';
-
-			if (sscanf(one_value, "%u", &current->cpu) != 1)
-				goto error_out;
-
-			pos = i + 1;
-		}
-	}
-
-	return first;
-
- error_out:
-	while (first) {
-		current = first->next;
-		free(first);
-		first = current;
-	}
-	return NULL;
-}
-
-struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus(unsigned int cpu)
-{
-	return sysfs_get_cpu_list(cpu, "affected_cpus");
-}
-
-struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus(unsigned int cpu)
-{
-	return sysfs_get_cpu_list(cpu, "related_cpus");
-}
-
-struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu,
-					unsigned long long *total_time) {
-	struct cpufreq_stats *first = NULL;
-	struct cpufreq_stats *current = NULL;
-	char one_value[SYSFS_PATH_MAX];
-	char linebuf[MAX_LINE_LEN];
-	unsigned int pos, i;
-	unsigned int len;
-
-	len = sysfs_cpufreq_read_file(cpu, "stats/time_in_state",
-				linebuf, sizeof(linebuf));
-	if (len == 0)
-		return NULL;
-
-	*total_time = 0;
-	pos = 0;
-	for (i = 0; i < len; i++) {
-		if (i == strlen(linebuf) || linebuf[i] == '\n')	{
-			if (i - pos < 2)
-				continue;
-			if ((i - pos) >= SYSFS_PATH_MAX)
-				goto error_out;
-			if (current) {
-				current->next = malloc(sizeof(*current));
-				if (!current->next)
-					goto error_out;
-				current = current->next;
-			} else {
-				first = malloc(sizeof(*first));
-				if (!first)
-					goto error_out;
-				current = first;
-			}
-			current->first = first;
-			current->next = NULL;
-
-			memcpy(one_value, linebuf + pos, i - pos);
-			one_value[i - pos] = '\0';
-			if (sscanf(one_value, "%lu %llu",
-					&current->frequency,
-					&current->time_in_state) != 2)
-				goto error_out;
-
-			*total_time = *total_time + current->time_in_state;
-			pos = i + 1;
-		}
-	}
-
-	return first;
-
- error_out:
-	while (first) {
-		current = first->next;
-		free(first);
-		first = current;
-	}
-	return NULL;
-}
-
-unsigned long sysfs_get_freq_transitions(unsigned int cpu)
-{
-	return sysfs_cpufreq_get_one_value(cpu, STATS_NUM_TRANSITIONS);
-}
-
-static int verify_gov(char *new_gov, char *passed_gov)
-{
-	unsigned int i, j = 0;
-
-	if (!passed_gov || (strlen(passed_gov) > 19))
-		return -EINVAL;
-
-	strncpy(new_gov, passed_gov, 20);
-	for (i = 0; i < 20; i++) {
-		if (j) {
-			new_gov[i] = '\0';
-			continue;
-		}
-		if ((new_gov[i] >= 'a') && (new_gov[i] <= 'z'))
-			continue;
-
-		if ((new_gov[i] >= 'A') && (new_gov[i] <= 'Z'))
-			continue;
-
-		if (new_gov[i] == '-')
-			continue;
-
-		if (new_gov[i] == '_')
-			continue;
-
-		if (new_gov[i] == '\0') {
-			j = 1;
-			continue;
-		}
-		return -EINVAL;
-	}
-	new_gov[19] = '\0';
-	return 0;
-}
-
-int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor)
-{
-	char new_gov[SYSFS_PATH_MAX];
-
-	if (!governor)
-		return -EINVAL;
-
-	if (verify_gov(new_gov, governor))
-		return -EINVAL;
-
-	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
-					     new_gov, strlen(new_gov));
-};
-
-int sysfs_modify_freq_policy_max(unsigned int cpu, unsigned long max_freq)
-{
-	char value[SYSFS_PATH_MAX];
-
-	snprintf(value, SYSFS_PATH_MAX, "%lu", max_freq);
-
-	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
-					     value, strlen(value));
-};
-
-
-int sysfs_modify_freq_policy_min(unsigned int cpu, unsigned long min_freq)
-{
-	char value[SYSFS_PATH_MAX];
-
-	snprintf(value, SYSFS_PATH_MAX, "%lu", min_freq);
-
-	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ,
-					     value, strlen(value));
-};
-
-
-int sysfs_set_freq_policy(unsigned int cpu, struct cpufreq_policy *policy)
-{
-	char min[SYSFS_PATH_MAX];
-	char max[SYSFS_PATH_MAX];
-	char gov[SYSFS_PATH_MAX];
-	int ret;
-	unsigned long old_min;
-	int write_max_first;
-
-	if (!policy || !(policy->governor))
-		return -EINVAL;
-
-	if (policy->max < policy->min)
-		return -EINVAL;
-
-	if (verify_gov(gov, policy->governor))
-		return -EINVAL;
-
-	snprintf(min, SYSFS_PATH_MAX, "%lu", policy->min);
-	snprintf(max, SYSFS_PATH_MAX, "%lu", policy->max);
-
-	old_min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
-	write_max_first = (old_min && (policy->max < old_min) ? 0 : 1);
-
-	if (write_max_first) {
-		ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
-						    max, strlen(max));
-		if (ret)
-			return ret;
-	}
-
-	ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, min,
-					    strlen(min));
-	if (ret)
-		return ret;
-
-	if (!write_max_first) {
-		ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
-						    max, strlen(max));
-		if (ret)
-			return ret;
-	}
-
-	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
-					     gov, strlen(gov));
-}
-
-int sysfs_set_frequency(unsigned int cpu, unsigned long target_frequency)
-{
-	struct cpufreq_policy *pol = sysfs_get_freq_policy(cpu);
-	char userspace_gov[] = "userspace";
-	char freq[SYSFS_PATH_MAX];
-	int ret;
-
-	if (!pol)
-		return -ENODEV;
-
-	if (strncmp(pol->governor, userspace_gov, 9) != 0) {
-		ret = sysfs_modify_freq_policy_governor(cpu, userspace_gov);
-		if (ret) {
-			cpufreq_put_policy(pol);
-			return ret;
-		}
-	}
-
-	cpufreq_put_policy(pol);
-
-	snprintf(freq, SYSFS_PATH_MAX, "%lu", target_frequency);
-
-	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_SET_SPEED,
-					     freq, strlen(freq));
-}
-
-/* CPUFREQ sysfs access **************************************************/
-
-/* General sysfs access **************************************************/
-int sysfs_cpu_exists(unsigned int cpu)
-{
-	char file[SYSFS_PATH_MAX];
-	struct stat statbuf;
-
-	snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/", cpu);
-
-	if (stat(file, &statbuf) != 0)
-		return -ENOSYS;
-
-	return S_ISDIR(statbuf.st_mode) ? 0 : -ENOSYS;
-}
-
-/* General sysfs access **************************************************/
diff --git a/tools/power/cpupower/lib/sysfs.h b/tools/power/cpupower/lib/sysfs.h
deleted file mode 100644
index c76a5e0af50167fee983eca64bd762c473aa30e6..0000000000000000000000000000000000000000
--- a/tools/power/cpupower/lib/sysfs.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* General */
-extern unsigned int sysfs_cpu_exists(unsigned int cpu);
-
-/* CPUfreq */
-extern unsigned long sysfs_get_freq_kernel(unsigned int cpu);
-extern unsigned long sysfs_get_freq_hardware(unsigned int cpu);
-extern unsigned long sysfs_get_freq_transition_latency(unsigned int cpu);
-extern int sysfs_get_freq_hardware_limits(unsigned int cpu,
-					unsigned long *min, unsigned long *max);
-extern char *sysfs_get_freq_driver(unsigned int cpu);
-extern struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu);
-extern struct cpufreq_available_governors *sysfs_get_freq_available_governors(
-	unsigned int cpu);
-extern struct cpufreq_available_frequencies *sysfs_get_available_frequencies(
-	unsigned int cpu);
-extern struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus(
-	unsigned int cpu);
-extern struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus(
-	unsigned int cpu);
-extern struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu,
-						unsigned long long *total_time);
-extern unsigned long sysfs_get_freq_transitions(unsigned int cpu);
-extern int sysfs_set_freq_policy(unsigned int cpu,
-				struct cpufreq_policy *policy);
-extern int sysfs_modify_freq_policy_min(unsigned int cpu,
-					unsigned long min_freq);
-extern int sysfs_modify_freq_policy_max(unsigned int cpu,
-					unsigned long max_freq);
-extern int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor);
-extern int sysfs_set_frequency(unsigned int cpu,
-			unsigned long target_frequency);
diff --git a/tools/power/cpupower/man/cpupower-frequency-info.1 b/tools/power/cpupower/man/cpupower-frequency-info.1
index 9c85a382e35544bb5819252dbf3e667c2c8f65af..6aa8d239dff9d828234a54499b32edf0c17ee065 100644
--- a/tools/power/cpupower/man/cpupower-frequency-info.1
+++ b/tools/power/cpupower/man/cpupower-frequency-info.1
@@ -1,7 +1,7 @@
 .TH "CPUPOWER\-FREQUENCY\-INFO" "1" "0.1" "" "cpupower Manual"
 .SH "NAME"
 .LP 
-cpupower frequency\-info \- Utility to retrieve cpufreq kernel information
+cpupower\-frequency\-info \- Utility to retrieve cpufreq kernel information
 .SH "SYNTAX"
 .LP 
 cpupower [ \-c cpulist ] frequency\-info [\fIoptions\fP]
diff --git a/tools/power/cpupower/man/cpupower-frequency-set.1 b/tools/power/cpupower/man/cpupower-frequency-set.1
index 3eacc8d03d1a1e12b167c3c1926f9851740e1578..b50570221a5b265b7fe182a0ecb950647a3739e2 100644
--- a/tools/power/cpupower/man/cpupower-frequency-set.1
+++ b/tools/power/cpupower/man/cpupower-frequency-set.1
@@ -1,7 +1,7 @@
 .TH "CPUPOWER\-FREQUENCY\-SET" "1" "0.1" "" "cpupower Manual"
 .SH "NAME"
 .LP 
-cpupower frequency\-set \- A small tool which allows to modify cpufreq settings.
+cpupower\-frequency\-set \- A small tool which allows to modify cpufreq settings.
 .SH "SYNTAX"
 .LP 
 cpupower [ \-c cpu ] frequency\-set [\fIoptions\fP]
diff --git a/tools/power/cpupower/man/cpupower-idle-info.1 b/tools/power/cpupower/man/cpupower-idle-info.1
index 7b3646adb92f597cf9016c88e3c5d97e12f2b9c0..80a1311fa7477c21d7704f0cfe169ecd9081cd95 100644
--- a/tools/power/cpupower/man/cpupower-idle-info.1
+++ b/tools/power/cpupower/man/cpupower-idle-info.1
@@ -1,7 +1,7 @@
 .TH "CPUPOWER-IDLE-INFO" "1" "0.1" "" "cpupower Manual"
 .SH "NAME"
 .LP
-cpupower idle\-info \- Utility to retrieve cpu idle kernel information
+cpupower\-idle\-info \- Utility to retrieve cpu idle kernel information
 .SH "SYNTAX"
 .LP
 cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP]
diff --git a/tools/power/cpupower/man/cpupower-idle-set.1 b/tools/power/cpupower/man/cpupower-idle-set.1
index 580c4e3ea92ad5425cb0b0c458c2d3fbfa23983c..21916cff7516af865b18466b78cb9e807bc48b51 100644
--- a/tools/power/cpupower/man/cpupower-idle-set.1
+++ b/tools/power/cpupower/man/cpupower-idle-set.1
@@ -1,7 +1,7 @@
 .TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual"
 .SH "NAME"
 .LP
-cpupower idle\-set \- Utility to set cpu idle state specific kernel options
+cpupower\-idle\-set \- Utility to set cpu idle state specific kernel options
 .SH "SYNTAX"
 .LP
 cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP]
diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c
index 0fbd1a22c0a984c0ceac2f832ca791058c0d1524..b4bf76971dc975c5232b96f27f56310f65d2bcdd 100644
--- a/tools/power/cpupower/utils/cpufreq-set.c
+++ b/tools/power/cpupower/utils/cpufreq-set.c
@@ -16,8 +16,8 @@
 #include <getopt.h>
 
 #include "cpufreq.h"
+#include "cpuidle.h"
 #include "helpers/helpers.h"
-#include "helpers/sysfs.h"
 
 #define NORM_FREQ_LEN 32
 
@@ -296,7 +296,7 @@ int cmd_freq_set(int argc, char **argv)
 			struct cpufreq_affected_cpus *cpus;
 
 			if (!bitmask_isbitset(cpus_chosen, cpu) ||
-			    cpufreq_cpu_exists(cpu))
+			    cpupower_is_cpu_online(cpu))
 				continue;
 
 			cpus = cpufreq_get_related_cpus(cpu);
@@ -316,10 +316,10 @@ int cmd_freq_set(int argc, char **argv)
 	     cpu <= bitmask_last(cpus_chosen); cpu++) {
 
 		if (!bitmask_isbitset(cpus_chosen, cpu) ||
-		    cpufreq_cpu_exists(cpu))
+		    cpupower_is_cpu_online(cpu))
 			continue;
 
-		if (sysfs_is_cpu_online(cpu) != 1)
+		if (cpupower_is_cpu_online(cpu) != 1)
 			continue;
 
 		printf(_("Setting cpu: %d\n"), cpu);
diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c
index 8bf8ab5ffa25d18580a850eb79b276fed712cfbf..b59c85defa053b5f062f5f97d603279320c13109 100644
--- a/tools/power/cpupower/utils/cpuidle-info.c
+++ b/tools/power/cpupower/utils/cpuidle-info.c
@@ -13,8 +13,10 @@
 #include <string.h>
 #include <getopt.h>
 
-#include "helpers/helpers.h"
+#include <cpuidle.h>
+
 #include "helpers/sysfs.h"
+#include "helpers/helpers.h"
 #include "helpers/bitmask.h"
 
 #define LINE_LEN 10
@@ -24,7 +26,7 @@ static void cpuidle_cpu_output(unsigned int cpu, int verbose)
 	unsigned int idlestates, idlestate;
 	char *tmp;
 
-	idlestates = sysfs_get_idlestate_count(cpu);
+	idlestates = cpuidle_state_count(cpu);
 	if (idlestates == 0) {
 		printf(_("CPU %u: No idle states\n"), cpu);
 		return;
@@ -33,7 +35,7 @@ static void cpuidle_cpu_output(unsigned int cpu, int verbose)
 	printf(_("Number of idle states: %d\n"), idlestates);
 	printf(_("Available idle states:"));
 	for (idlestate = 0; idlestate < idlestates; idlestate++) {
-		tmp = sysfs_get_idlestate_name(cpu, idlestate);
+		tmp = cpuidle_state_name(cpu, idlestate);
 		if (!tmp)
 			continue;
 		printf(" %s", tmp);
@@ -45,28 +47,28 @@ static void cpuidle_cpu_output(unsigned int cpu, int verbose)
 		return;
 
 	for (idlestate = 0; idlestate < idlestates; idlestate++) {
-		int disabled = sysfs_is_idlestate_disabled(cpu, idlestate);
+		int disabled = cpuidle_is_state_disabled(cpu, idlestate);
 		/* Disabled interface not supported on older kernels */
 		if (disabled < 0)
 			disabled = 0;
-		tmp = sysfs_get_idlestate_name(cpu, idlestate);
+		tmp = cpuidle_state_name(cpu, idlestate);
 		if (!tmp)
 			continue;
 		printf("%s%s:\n", tmp, (disabled) ? " (DISABLED) " : "");
 		free(tmp);
 
-		tmp = sysfs_get_idlestate_desc(cpu, idlestate);
+		tmp = cpuidle_state_desc(cpu, idlestate);
 		if (!tmp)
 			continue;
 		printf(_("Flags/Description: %s\n"), tmp);
 		free(tmp);
 
 		printf(_("Latency: %lu\n"),
-		       sysfs_get_idlestate_latency(cpu, idlestate));
+		       cpuidle_state_latency(cpu, idlestate));
 		printf(_("Usage: %lu\n"),
-		       sysfs_get_idlestate_usage(cpu, idlestate));
+		       cpuidle_state_usage(cpu, idlestate));
 		printf(_("Duration: %llu\n"),
-		       sysfs_get_idlestate_time(cpu, idlestate));
+		       cpuidle_state_time(cpu, idlestate));
 	}
 }
 
@@ -74,7 +76,7 @@ static void cpuidle_general_output(void)
 {
 	char *tmp;
 
-	tmp = sysfs_get_cpuidle_driver();
+	tmp = cpuidle_get_driver();
 	if (!tmp) {
 		printf(_("Could not determine cpuidle driver\n"));
 		return;
@@ -83,7 +85,7 @@ static void cpuidle_general_output(void)
 	printf(_("CPUidle driver: %s\n"), tmp);
 	free(tmp);
 
-	tmp = sysfs_get_cpuidle_governor();
+	tmp = cpuidle_get_governor();
 	if (!tmp) {
 		printf(_("Could not determine cpuidle governor\n"));
 		return;
@@ -98,7 +100,7 @@ static void proc_cpuidle_cpu_output(unsigned int cpu)
 	long max_allowed_cstate = 2000000000;
 	unsigned int cstate, cstates;
 
-	cstates = sysfs_get_idlestate_count(cpu);
+	cstates = cpuidle_state_count(cpu);
 	if (cstates == 0) {
 		printf(_("CPU %u: No C-states info\n"), cpu);
 		return;
@@ -113,11 +115,11 @@ static void proc_cpuidle_cpu_output(unsigned int cpu)
 			 "type[C%d] "), cstate, cstate);
 		printf(_("promotion[--] demotion[--] "));
 		printf(_("latency[%03lu] "),
-		       sysfs_get_idlestate_latency(cpu, cstate));
+		       cpuidle_state_latency(cpu, cstate));
 		printf(_("usage[%08lu] "),
-		       sysfs_get_idlestate_usage(cpu, cstate));
+		       cpuidle_state_usage(cpu, cstate));
 		printf(_("duration[%020Lu] \n"),
-		       sysfs_get_idlestate_time(cpu, cstate));
+		       cpuidle_state_time(cpu, cstate));
 	}
 }
 
diff --git a/tools/power/cpupower/utils/cpuidle-set.c b/tools/power/cpupower/utils/cpuidle-set.c
index d6b6ae44b8c247ffdb6378d8dcd3cb36f0265142..691c24d50ef4dbf91a5759793e478fd67f1050a9 100644
--- a/tools/power/cpupower/utils/cpuidle-set.c
+++ b/tools/power/cpupower/utils/cpuidle-set.c
@@ -5,12 +5,12 @@
 #include <limits.h>
 #include <string.h>
 #include <ctype.h>
-
 #include <getopt.h>
 
-#include "cpufreq.h"
+#include <cpufreq.h>
+#include <cpuidle.h>
+
 #include "helpers/helpers.h"
-#include "helpers/sysfs.h"
 
 static struct option info_opts[] = {
      {"disable",	required_argument,		NULL, 'd'},
@@ -104,16 +104,16 @@ int cmd_idle_set(int argc, char **argv)
 		if (!bitmask_isbitset(cpus_chosen, cpu))
 			continue;
 
-		if (sysfs_is_cpu_online(cpu) != 1)
+		if (cpupower_is_cpu_online(cpu) != 1)
 			continue;
 
-		idlestates = sysfs_get_idlestate_count(cpu);
+		idlestates = cpuidle_state_count(cpu);
 		if (idlestates <= 0)
 			continue;
 
 		switch (param) {
 		case 'd':
-			ret = sysfs_idlestate_disable(cpu, idlestate, 1);
+			ret = cpuidle_state_disable(cpu, idlestate, 1);
 			if (ret == 0)
 		printf(_("Idlestate %u disabled on CPU %u\n"),  idlestate, cpu);
 			else if (ret == -1)
@@ -126,7 +126,7 @@ int cmd_idle_set(int argc, char **argv)
 		       idlestate, cpu);
 			break;
 		case 'e':
-			ret = sysfs_idlestate_disable(cpu, idlestate, 0);
+			ret = cpuidle_state_disable(cpu, idlestate, 0);
 			if (ret == 0)
 		printf(_("Idlestate %u enabled on CPU %u\n"),  idlestate, cpu);
 			else if (ret == -1)
@@ -140,13 +140,13 @@ int cmd_idle_set(int argc, char **argv)
 			break;
 		case 'D':
 			for (idlestate = 0; idlestate < idlestates; idlestate++) {
-				disabled = sysfs_is_idlestate_disabled
+				disabled = cpuidle_is_state_disabled
 					(cpu, idlestate);
-				state_latency = sysfs_get_idlestate_latency
+				state_latency = cpuidle_state_latency
 					(cpu, idlestate);
 				if (disabled == 1) {
 					if (latency > state_latency){
-						ret = sysfs_idlestate_disable
+						ret = cpuidle_state_disable
 							(cpu, idlestate, 0);
 						if (ret == 0)
 		printf(_("Idlestate %u enabled on CPU %u\n"),  idlestate, cpu);
@@ -154,7 +154,7 @@ int cmd_idle_set(int argc, char **argv)
 					continue;
 				}
 				if (latency <= state_latency){
-					ret = sysfs_idlestate_disable
+					ret = cpuidle_state_disable
 						(cpu, idlestate, 1);
 					if (ret == 0)
 		printf(_("Idlestate %u disabled on CPU %u\n"), idlestate, cpu);
@@ -163,10 +163,10 @@ int cmd_idle_set(int argc, char **argv)
 			break;
 		case 'E':
 			for (idlestate = 0; idlestate < idlestates; idlestate++) {
-				disabled = sysfs_is_idlestate_disabled
+				disabled = cpuidle_is_state_disabled
 					(cpu, idlestate);
 				if (disabled == 1) {
-					ret = sysfs_idlestate_disable
+					ret = cpuidle_state_disable
 						(cpu, idlestate, 0);
 					if (ret == 0)
 		printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu);
diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h
index aa9e95486a2d6c9765fb212caee1ade46c73d9ef..afb66f80554ecda25e139ddacb74d3a6443e8322 100644
--- a/tools/power/cpupower/utils/helpers/helpers.h
+++ b/tools/power/cpupower/utils/helpers/helpers.h
@@ -14,6 +14,7 @@
 #include <locale.h>
 
 #include "helpers/bitmask.h"
+#include <cpupower.h>
 
 /* Internationalization ****************************/
 #ifdef NLS
@@ -92,31 +93,6 @@ extern int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info);
 extern struct cpupower_cpu_info cpupower_cpu_info;
 /* cpuid and cpuinfo helpers  **************************/
 
-struct cpuid_core_info {
-	int pkg;
-	int core;
-	int cpu;
-
-	/* flags */
-	unsigned int is_online:1;
-};
-
-/* CPU topology/hierarchy parsing ******************/
-struct cpupower_topology {
-	/* Amount of CPU cores, packages and threads per core in the system */
-	unsigned int cores;
-	unsigned int pkgs;
-	unsigned int threads; /* per core */
-
-	/* Array gets mallocated with cores entries, holding per core info */
-	struct cpuid_core_info *core_info;
-};
-
-extern int get_cpu_topology(struct cpupower_topology *cpu_top);
-extern void cpu_topology_release(struct cpupower_topology cpu_top);
-
-/* CPU topology/hierarchy parsing ******************/
-
 /* X86 ONLY ****************************************/
 #if defined(__i386__) || defined(__x86_64__)
 
diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c
index 5f9c908f4557e8cadd14d5e4ee1a0c2017cad1f5..a1a6c6041a1e3f3fb2a4509c2af9dfb98bec4776 100644
--- a/tools/power/cpupower/utils/helpers/topology.c
+++ b/tools/power/cpupower/utils/helpers/topology.c
@@ -16,110 +16,7 @@
 #include <errno.h>
 #include <fcntl.h>
 
-#include <helpers/helpers.h>
-#include <helpers/sysfs.h>
+#include <cpuidle.h>
 
-/* returns -1 on failure, 0 on success */
-static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *result)
-{
-	char linebuf[MAX_LINE_LEN];
-	char *endp;
-	char path[SYSFS_PATH_MAX];
+/* CPU topology/hierarchy parsing ******************/
 
-	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s",
-			 cpu, fname);
-	if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0)
-		return -1;
-	*result = strtol(linebuf, &endp, 0);
-	if (endp == linebuf || errno == ERANGE)
-		return -1;
-	return 0;
-}
-
-static int __compare(const void *t1, const void *t2)
-{
-	struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1;
-	struct cpuid_core_info *top2 = (struct cpuid_core_info *)t2;
-	if (top1->pkg < top2->pkg)
-		return -1;
-	else if (top1->pkg > top2->pkg)
-		return 1;
-	else if (top1->core < top2->core)
-		return -1;
-	else if (top1->core > top2->core)
-		return 1;
-	else if (top1->cpu < top2->cpu)
-		return -1;
-	else if (top1->cpu > top2->cpu)
-		return 1;
-	else
-		return 0;
-}
-
-/*
- * Returns amount of cpus, negative on error, cpu_top must be
- * passed to cpu_topology_release to free resources
- *
- * Array is sorted after ->pkg, ->core, then ->cpu
- */
-int get_cpu_topology(struct cpupower_topology *cpu_top)
-{
-	int cpu, last_pkg, cpus = sysconf(_SC_NPROCESSORS_CONF);
-
-	cpu_top->core_info = malloc(sizeof(struct cpuid_core_info) * cpus);
-	if (cpu_top->core_info == NULL)
-		return -ENOMEM;
-	cpu_top->pkgs = cpu_top->cores = 0;
-	for (cpu = 0; cpu < cpus; cpu++) {
-		cpu_top->core_info[cpu].cpu = cpu;
-		cpu_top->core_info[cpu].is_online = sysfs_is_cpu_online(cpu);
-		if(sysfs_topology_read_file(
-			cpu,
-			"physical_package_id",
-			&(cpu_top->core_info[cpu].pkg)) < 0) {
-			cpu_top->core_info[cpu].pkg = -1;
-			cpu_top->core_info[cpu].core = -1;
-			continue;
-		}
-		if(sysfs_topology_read_file(
-			cpu,
-			"core_id",
-			&(cpu_top->core_info[cpu].core)) < 0) {
-			cpu_top->core_info[cpu].pkg = -1;
-			cpu_top->core_info[cpu].core = -1;
-			continue;
-		}
-	}
-
-	qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info),
-	      __compare);
-
-	/* Count the number of distinct pkgs values. This works
-	   because the primary sort of the core_info struct was just
-	   done by pkg value. */
-	last_pkg = cpu_top->core_info[0].pkg;
-	for(cpu = 1; cpu < cpus; cpu++) {
-		if (cpu_top->core_info[cpu].pkg != last_pkg &&
-				cpu_top->core_info[cpu].pkg != -1) {
-
-			last_pkg = cpu_top->core_info[cpu].pkg;
-			cpu_top->pkgs++;
-		}
-	}
-	if (!(cpu_top->core_info[0].pkg == -1))
-		cpu_top->pkgs++;
-
-	/* Intel's cores count is not consecutively numbered, there may
-	 * be a core_id of 3, but none of 2. Assume there always is 0
-	 * Get amount of cores by counting duplicates in a package
-	for (cpu = 0; cpu_top->core_info[cpu].pkg = 0 && cpu < cpus; cpu++) {
-		if (cpu_top->core_info[cpu].core == 0)
-	cpu_top->cores++;
-	*/
-	return cpus;
-}
-
-void cpu_topology_release(struct cpupower_topology cpu_top)
-{
-	free(cpu_top.core_info);
-}
diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
index bcd22a1a397083d1b6e5ed7d311fcbcf8e01dffb..1b5da0066ebf90bfe4c441fab62fd26b4cc99267 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
@@ -10,8 +10,8 @@
 #include <stdint.h>
 #include <string.h>
 #include <limits.h>
+#include <cpuidle.h>
 
-#include "helpers/sysfs.h"
 #include "helpers/helpers.h"
 #include "idle_monitor/cpupower-monitor.h"
 
@@ -51,7 +51,7 @@ static int cpuidle_start(void)
 		for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num;
 		     state++) {
 			previous_count[cpu][state] =
-				sysfs_get_idlestate_time(cpu, state);
+				cpuidle_state_time(cpu, state);
 			dprint("CPU %d - State: %d - Val: %llu\n",
 			       cpu, state, previous_count[cpu][state]);
 		}
@@ -70,7 +70,7 @@ static int cpuidle_stop(void)
 		for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num;
 		     state++) {
 			current_count[cpu][state] =
-				sysfs_get_idlestate_time(cpu, state);
+				cpuidle_state_time(cpu, state);
 			dprint("CPU %d - State: %d - Val: %llu\n",
 			       cpu, state, previous_count[cpu][state]);
 		}
@@ -132,13 +132,13 @@ static struct cpuidle_monitor *cpuidle_register(void)
 	char *tmp;
 
 	/* Assume idle state count is the same for all CPUs */
-	cpuidle_sysfs_monitor.hw_states_num = sysfs_get_idlestate_count(0);
+	cpuidle_sysfs_monitor.hw_states_num = cpuidle_state_count(0);
 
 	if (cpuidle_sysfs_monitor.hw_states_num <= 0)
 		return NULL;
 
 	for (num = 0; num < cpuidle_sysfs_monitor.hw_states_num; num++) {
-		tmp = sysfs_get_idlestate_name(0, num);
+		tmp = cpuidle_state_name(0, num);
 		if (tmp == NULL)
 			continue;
 
@@ -146,7 +146,7 @@ static struct cpuidle_monitor *cpuidle_register(void)
 		strncpy(cpuidle_cstates[num].name, tmp, CSTATE_NAME_LEN - 1);
 		free(tmp);
 
-		tmp = sysfs_get_idlestate_desc(0, num);
+		tmp = cpuidle_state_desc(0, num);
 		if (tmp == NULL)
 			continue;
 		strncpy(cpuidle_cstates[num].desc, tmp,	CSTATE_DESC_LEN - 1);