提交 d46de9d2 编写于 作者: O Oldřich Jedlička 提交者: Mauro Carvalho Chehab

V4L/DVB (11567): saa7134: Added support for AVerMedia Cardbus Plus

Here comes the full support for AVerMedia Cardbus Plus (E501R) - including
remote control. TV, Composite and FM radio tested, I don't have S-Video to
test. I've figured out that the radio works only with xtal frequency 13MHz.

[mchehab@redhat.com: CodingStyle fixes]
Signed-off-by: NOldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 df0dbbe2
......@@ -156,3 +156,4 @@
155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708]
156 -> Hauppauge WinTV-HVR1110r3 [0070:6707,0070:6709,0070:670a]
157 -> Avermedia AVerTV Studio 507UA [1461:a11b]
158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9]
......@@ -1669,6 +1669,39 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE1,
},
},
[SAA7134_BOARD_AVERMEDIA_CARDBUS_501] = {
/* Oldrich Jedlicka <oldium.pro@seznam.cz> */
.name = "AVerMedia Cardbus TV/Radio (E501R)",
.audio_clock = 0x187de7,
.tuner_type = TUNER_ALPS_TSBE5_PAL,
.radio_type = TUNER_TEA5767,
.tuner_addr = 0x61,
.radio_addr = 0x60,
.tda9887_conf = TDA9887_PRESENT,
.gpiomask = 0x08000000,
.inputs = { {
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
.gpio = 0x08000000,
}, {
.name = name_comp1,
.vmux = 3,
.amux = LINE1,
.gpio = 0x08000000,
}, {
.name = name_svideo,
.vmux = 8,
.amux = LINE1,
.gpio = 0x08000000,
} },
.radio = {
.name = name_radio,
.amux = LINE2,
.gpio = 0x00000000,
},
},
[SAA7134_BOARD_CINERGY400_CARDBUS] = {
.name = "Terratec Cinergy 400 mobile",
.audio_clock = 0x187de7,
......@@ -5065,6 +5098,13 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subdevice = 0xd6ee,
.driver_data = SAA7134_BOARD_AVERMEDIA_CARDBUS,
},{
/* AVerMedia CardBus */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x1461, /* Avermedia Technologies Inc */
.subdevice = 0xb7e9,
.driver_data = SAA7134_BOARD_AVERMEDIA_CARDBUS_501,
}, {
/* TransGear 3000TV */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
......@@ -6240,6 +6280,16 @@ int saa7134_board_init1(struct saa7134_dev *dev)
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
msleep(10);
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
/* power-down tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x08400000, 0x08400000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08400000, 0);
msleep(10);
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x08400000, 0x08400000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08400000, 0x08400000);
msleep(10);
dev->has_remote = SAA7134_REMOTE_I2C;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
saa7134_set_gpio(dev, 23, 0);
msleep(10);
......@@ -6679,6 +6729,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
switch (dev->board) {
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
{
struct v4l2_priv_tun_config tea5767_cfg;
struct tea5767_ctrl ctl;
......
......@@ -281,6 +281,7 @@ struct saa7134_format {
#define SAA7134_BOARD_HAUPPAUGE_HVR1120 155
#define SAA7134_BOARD_HAUPPAUGE_HVR1110R3 156
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157
#define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册