diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 575ff1ae85a738f84cf48720d19e850b96caa0e5..339150ab0ea5d63e13f0520e06612fc827f37f49 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -279,13 +279,13 @@ static void __init eukrea_cpuimx27_init(void) #if defined(CONFIG_USB_ULPI) if (otg_mode_host) { otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); mxc_register_device(&mxc_otg_host, &otg_pdata); } usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); mxc_register_device(&mxc_usbh2, &usbh2_pdata); #endif diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index a389d1148f18c641cd1c997f4798b6641e084bdc..23c9e1f37b9c022bee669908e7aeca791de3b4b4 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -419,13 +419,13 @@ static void __init pca100_init(void) #if defined(CONFIG_USB_ULPI) if (otg_mode_host) { otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); mxc_register_device(&mxc_otg_host, &otg_pdata); } usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); mxc_register_device(&mxc_usbh2, &usbh2_pdata); #endif diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c index 56b2e26d23b4eda6a178e6ee633eae2526bd3186..a5f0174290b4eaa0ae36a1769ae4c9cb32631d3c 100644 --- a/arch/arm/mach-mx25/mach-cpuimx25.c +++ b/arch/arm/mach-mx25/mach-cpuimx25.c @@ -138,7 +138,7 @@ static void __init eukrea_cpuimx25_init(void) #if defined(CONFIG_USB_ULPI) if (otg_mode_host) { otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); mxc_register_device(&mxc_otg, &otg_pdata); } diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 63f970f340a2cc28482ea1484a248fade05098e8..9770a6a973be561fdfb67cfdda1f8cdf36381e8e 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -192,7 +192,7 @@ static void __init mxc_board_init(void) #if defined(CONFIG_USB_ULPI) if (otg_mode_host) { otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); mxc_register_device(&mxc_otg_host, &otg_pdata); } diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index e483f80822d27003c7da89f0b472a91cde93b110..1160c55de7f280122038aa21ee063ac1cfa06cb3 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -723,12 +723,12 @@ int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str) /** * usb_string_ids_n() - allocate unused string IDs in batch - * @cdev: the device whose string descriptor IDs are being allocated + * @c: the device whose string descriptor IDs are being allocated * @n: number of string IDs to allocate * Context: single threaded during gadget setup * * Returns the first requested ID. This ID and next @n-1 IDs are now - * valid IDs. At least providind that @n is non zore because if it + * valid IDs. At least provided that @n is non-zero because if it * is, returns last requested ID which is now very useful information. * * @usb_string_ids_n() is called from bind() callbacks to allocate diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 166bf71fd3482252e00fde5455fc529e8f22337b..e03058fe23cbc91394474e1130aed8fcaa6c5f84 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1609,6 +1609,7 @@ static int __init m66592_probe(struct platform_device *pdev) /* initialize ucd */ m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL); if (m66592 == NULL) { + ret = -ENOMEM; pr_err("kzalloc error\n"); goto clean_up; } diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 70a817842755484f5ee0b19e51db505b32532bf5..2456ccd9965e3432ab4fd32a33052c104e725698 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1557,6 +1557,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) /* initialize ucd */ r8a66597 = kzalloc(sizeof(struct r8a66597), GFP_KERNEL); if (r8a66597 == NULL) { + ret = -ENOMEM; printk(KERN_ERR "kzalloc error\n"); goto clean_up; } diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index 2dcffdac86d29d061a150706cf5bbfc4d95f8064..5e807f083bc820e1251fbb7a08e8c023ed462edd 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -94,7 +94,7 @@ uvc_v4l2_set_format(struct uvc_video *video, struct v4l2_format *fmt) break; } - if (format == NULL || format->fcc != fmt->fmt.pix.pixelformat) { + if (i == ARRAY_SIZE(uvc_formats)) { printk(KERN_INFO "Unsupported format 0x%08x.\n", fmt->fmt.pix.pixelformat); return -EINVAL; diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index d1a3dfc9a40873ea46df2a81668b065d105fb9cc..bdba8c5d844aa4ba099e128e1ed5f765d2ae349b 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -829,6 +829,7 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, * almost immediately. With ISP1761, this register requires a delay of * 195ns between a write and subsequent read (see section 15.1.1.3). */ + mmiowb(); ndelay(195); skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG); @@ -870,6 +871,7 @@ static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, * almost immediately. With ISP1761, this register requires a delay of * 195ns between a write and subsequent read (see section 15.1.1.3). */ + mmiowb(); ndelay(195); skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bc3f4f427065901059737ca960bd03d0fa75a8fc..48e60d166ff04c3b749607ebab77f1b797321875 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -131,7 +131,7 @@ static void next_trb(struct xhci_hcd *xhci, *seg = (*seg)->next; *trb = ((*seg)->trbs); } else { - *trb = (*trb)++; + (*trb)++; } } @@ -1551,6 +1551,10 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, /* calc actual length */ if (ep->skip) { td->urb->iso_frame_desc[idx].actual_length = 0; + /* Update ring dequeue pointer */ + while (ep_ring->dequeue != td->last_trb) + inc_deq(xhci, ep_ring, false); + inc_deq(xhci, ep_ring, false); return finish_td(xhci, td, event_trb, event, ep, status, true); } diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index d240de097c6211afd6ff2ef1399c1b2add9ca751..801324af9470a08d5b42011bfa397a03d97cb99d 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -439,7 +439,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, /* drain secondary buffer */ int amount = bytes_to_read < data_in_secondary ? bytes_to_read : data_in_secondary; i = copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount); - if (i < 0) { + if (i) { retval = -EFAULT; goto exit; } diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 2de49c8887c5f772b0f166cc7b98354f4ad902ea..bc88c79875a146712cae5fcb7461325501f20ad7 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -542,7 +542,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, retval = io_res; else { io_res = copy_to_user(user_buffer, buffer, dev->report_size); - if (io_res < 0) + if (io_res) retval = -EFAULT; } break; @@ -574,7 +574,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, } io_res = copy_to_user((struct iowarrior_info __user *)arg, &info, sizeof(struct iowarrior_info)); - if (io_res < 0) + if (io_res) retval = -EFAULT; break; } diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 0e8888588d4e01db602762276d0561d15739ed27..05aaac1c3861e5be2f8d30c4311e7faa5a2c40a8 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -550,6 +550,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; int status, err; + u8 pwr; if (!pdata) { dev_dbg(&pdev->dev, "platform_data not available\n"); @@ -568,7 +569,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) twl->otg.set_peripheral = twl4030_set_peripheral; twl->otg.set_suspend = twl4030_set_suspend; twl->usb_mode = pdata->usb_mode; - twl->asleep = 1; + + pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + + twl->asleep = (pwr & PHY_PWR_PHYPWD); /* init spinlock for workqueue */ spin_lock_init(&twl->lock); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 2bef4415c19c6627ef2555ab9a7f462bb8ed71f2..80bf8333bb037a67fc8d141fd0e33449eff18886 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -222,8 +222,8 @@ static struct usb_serial_driver cp210x_device = { #define BITS_STOP_2 0x0002 /* CP210X_SET_BREAK */ -#define BREAK_ON 0x0000 -#define BREAK_OFF 0x0001 +#define BREAK_ON 0x0001 +#define BREAK_OFF 0x0000 /* CP210X_(SET_MHS|GET_MDMSTS) */ #define CONTROL_DTR 0x0001 diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index eb12d9b096b4f54f803b9ee34e9302e694a799b8..63ddb2f65ceee774150090c8a42c9b83bc947dd3 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -180,6 +180,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, + { USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) }, @@ -750,6 +751,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) }, + { USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1376,7 +1379,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port) } /* set max packet size based on descriptor */ - priv->max_packet_size = ep_desc->wMaxPacketSize; + priv->max_packet_size = le16_to_cpu(ep_desc->wMaxPacketSize); dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size); } diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 6e612c52e763a0095bcb4e0f377cf02eaca8b1b8..2e95857c9633c3f6e2e52148854ea0620a6bf43e 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -110,6 +110,9 @@ /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 +/* Lenz LI-USB Computer Interface. */ +#define FTDI_LENZ_LIUSB_PID 0xD780 + /* * Xsens Technologies BV products (http://www.xsens.com). */ @@ -988,6 +991,12 @@ #define ALTI2_VID 0x1BC9 #define ALTI2_N3_PID 0x6001 /* Neptune 3 */ +/* + * Ionics PlugComputer + */ +#define IONICS_VID 0x1c0c +#define IONICS_PLUGCOMPUTER_PID 0x0102 + /* * Dresden Elektronik Sensor Terminal Board */ diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index ca92f67747cc2f2c4b1f5a411bc3763be9a0b009..0b1a13384c6d96766b937b197d6fb55517282932 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -518,6 +518,7 @@ void usb_serial_generic_disconnect(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) generic_cleanup(serial->port[i]); } +EXPORT_SYMBOL_GPL(usb_serial_generic_disconnect); void usb_serial_generic_release(struct usb_serial *serial) { diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index dc47f986df57f739b18ceb121dc8f19b0acd8c23..a7cfc59529377b16f084e6bd6e2bf118d4cc9cb5 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1151,7 +1151,7 @@ static int download_fw(struct edgeport_serial *serial) /* Check if we have an old version in the I2C and update if necessary */ - if (download_cur_ver != download_new_ver) { + if (download_cur_ver < download_new_ver) { dbg("%s - Update I2C dld from %d.%d to %d.%d", __func__, firmware_version->Ver_Major, @@ -1284,7 +1284,7 @@ static int download_fw(struct edgeport_serial *serial) kfree(header); kfree(rom_desc); kfree(ti_manuf_desc); - return status; + return -EINVAL; } /* Update I2C with type 0xf2 record with correct diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index a6b207c84917425db5f4c9ea1a1da075a6798002..1f00f243c26cf5e1825632e40fc9c2a60287f9e3 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -25,6 +25,7 @@ static int debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */ + { USB_DEVICE(0x0df7, 0x0900) }, /* Mobile Action i-gotU */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9fc6ea2c681fae8ce6a43404109ca23c3177a310..adcbdb994de3eab65e0d963538f08df6f6cf1a49 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -365,6 +365,10 @@ static void option_instat_callback(struct urb *urb); #define OLIVETTI_VENDOR_ID 0x0b3c #define OLIVETTI_PRODUCT_OLICARD100 0xc000 +/* Celot products */ +#define CELOT_VENDOR_ID 0x211f +#define CELOT_PRODUCT_CT680M 0x6801 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -887,10 +891,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) }, { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)}, { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)}, - { USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) }, - { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, + { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 6b60018222790bed2ec8f77b637a19bfd08caa2a..c98f0fb675bac35d25f29c636b83e81af1d2a2af 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -86,6 +86,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, + { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index a871645389dd365764485481bc8ba773c6c68f37..43eb9bdad422c91e4290f2204ee2f178d393b002 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -128,6 +128,10 @@ #define CRESSI_VENDOR_ID 0x04b8 #define CRESSI_EDY_PRODUCT_ID 0x0521 +/* Zeagle dive computer interface */ +#define ZEAGLE_VENDOR_ID 0x04b8 +#define ZEAGLE_N2ITION3_PRODUCT_ID 0x0522 + /* Sony, USB data cable for CMD-Jxx mobile phones */ #define SONY_VENDOR_ID 0x054c #define SONY_QN3USB_PRODUCT_ID 0x0437 diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 6e82d4f54bc87c167e6052119f052ca35bbfcf14..660c31f1499999e7def7e0644fc0b0f0a9859ddf 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #define QT_OPEN_CLOSE_CHANNEL 0xca @@ -27,36 +28,11 @@ #define QT_HW_FLOW_CONTROL_MASK 0xc5 #define QT_SW_FLOW_CONTROL_MASK 0xc6 -#define MODEM_CTL_REGISTER 0x04 -#define MODEM_STATUS_REGISTER 0x06 - - -#define SERIAL_LSR_OE 0x02 -#define SERIAL_LSR_PE 0x04 -#define SERIAL_LSR_FE 0x08 -#define SERIAL_LSR_BI 0x10 - -#define SERIAL_LSR_TEMT 0x40 - -#define SERIAL_MCR_DTR 0x01 -#define SERIAL_MCR_RTS 0x02 -#define SERIAL_MCR_LOOP 0x10 - -#define SERIAL_MSR_CTS 0x10 -#define SERIAL_MSR_CD 0x80 -#define SERIAL_MSR_RI 0x40 -#define SERIAL_MSR_DSR 0x20 #define SERIAL_MSR_MASK 0xf0 -#define SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS) +#define SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS) -#define SERIAL_8_DATA 0x03 -#define SERIAL_7_DATA 0x02 -#define SERIAL_6_DATA 0x01 -#define SERIAL_5_DATA 0x00 - -#define SERIAL_ODD_PARITY 0X08 -#define SERIAL_EVEN_PARITY 0X18 +#define SERIAL_EVEN_PARITY (UART_LCR_PARITY | UART_LCR_EPAR) #define MAX_BAUD_RATE 460800 @@ -99,10 +75,12 @@ static struct usb_driver ssu100_driver = { }; struct ssu100_port_private { + spinlock_t status_lock; u8 shadowLSR; u8 shadowMSR; wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ unsigned short max_packet_size; + struct async_icount icount; }; static void ssu100_release(struct usb_serial *serial) @@ -150,9 +128,10 @@ static inline int ssu100_getregister(struct usb_device *dev, static inline int ssu100_setregister(struct usb_device *dev, unsigned short uart, + unsigned short reg, u16 data) { - u16 value = (data << 8) | MODEM_CTL_REGISTER; + u16 value = (data << 8) | reg; return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), QT_SET_GET_REGISTER, 0x40, value, uart, @@ -178,11 +157,11 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set, clear &= ~set; /* 'set' takes precedence over 'clear' */ urb_value = 0; if (set & TIOCM_DTR) - urb_value |= SERIAL_MCR_DTR; + urb_value |= UART_MCR_DTR; if (set & TIOCM_RTS) - urb_value |= SERIAL_MCR_RTS; + urb_value |= UART_MCR_RTS; - result = ssu100_setregister(dev, 0, urb_value); + result = ssu100_setregister(dev, 0, UART_MCR, urb_value); if (result < 0) dbg("%s Error from MODEM_CTRL urb", __func__); @@ -264,24 +243,24 @@ static void ssu100_set_termios(struct tty_struct *tty, if (cflag & PARENB) { if (cflag & PARODD) - urb_value |= SERIAL_ODD_PARITY; + urb_value |= UART_LCR_PARITY; else urb_value |= SERIAL_EVEN_PARITY; } switch (cflag & CSIZE) { case CS5: - urb_value |= SERIAL_5_DATA; + urb_value |= UART_LCR_WLEN5; break; case CS6: - urb_value |= SERIAL_6_DATA; + urb_value |= UART_LCR_WLEN6; break; case CS7: - urb_value |= SERIAL_7_DATA; + urb_value |= UART_LCR_WLEN7; break; default: case CS8: - urb_value |= SERIAL_8_DATA; + urb_value |= UART_LCR_WLEN8; break; } @@ -333,6 +312,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) struct ssu100_port_private *priv = usb_get_serial_port_data(port); u8 *data; int result; + unsigned long flags; dbg("%s - port %d", __func__, port->number); @@ -350,11 +330,10 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) return result; } - priv->shadowLSR = data[0] & (SERIAL_LSR_OE | SERIAL_LSR_PE | - SERIAL_LSR_FE | SERIAL_LSR_BI); - - priv->shadowMSR = data[1] & (SERIAL_MSR_CTS | SERIAL_MSR_DSR | - SERIAL_MSR_RI | SERIAL_MSR_CD); + spin_lock_irqsave(&priv->status_lock, flags); + priv->shadowLSR = data[0]; + priv->shadowMSR = data[1]; + spin_unlock_irqrestore(&priv->status_lock, flags); kfree(data); @@ -398,11 +377,51 @@ static int get_serial_info(struct usb_serial_port *port, return 0; } +static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + struct async_icount prev, cur; + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + prev = priv->icount; + spin_unlock_irqrestore(&priv->status_lock, flags); + + while (1) { + wait_event_interruptible(priv->delta_msr_wait, + ((priv->icount.rng != prev.rng) || + (priv->icount.dsr != prev.dsr) || + (priv->icount.dcd != prev.dcd) || + (priv->icount.cts != prev.cts))); + + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&priv->status_lock, flags); + cur = priv->icount; + spin_unlock_irqrestore(&priv->status_lock, flags); + + if ((prev.rng == cur.rng) && + (prev.dsr == cur.dsr) && + (prev.dcd == cur.dcd) && + (prev.cts == cur.cts)) + return -EIO; + + if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) || + (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) || + (arg & TIOCM_CD && (prev.dcd != cur.dcd)) || + (arg & TIOCM_CTS && (prev.cts != cur.cts))) + return 0; + } + return 0; +} + static int ssu100_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct ssu100_port_private *priv = usb_get_serial_port_data(port); + void __user *user_arg = (void __user *)arg; dbg("%s cmd 0x%04x", __func__, cmd); @@ -412,28 +431,28 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file, (struct serial_struct __user *) arg); case TIOCMIWAIT: - while (priv != NULL) { - u8 prevMSR = priv->shadowMSR & SERIAL_MSR_MASK; - interruptible_sleep_on(&priv->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - else { - u8 diff = (priv->shadowMSR & SERIAL_MSR_MASK) ^ prevMSR; - if (!diff) - return -EIO; /* no change => error */ - - /* Return 0 if caller wanted to know about - these bits */ - - if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) || - ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) || - ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) || - ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS))) - return 0; - } - } + return wait_modem_info(port, arg); + + case TIOCGICOUNT: + { + struct serial_icounter_struct icount; + struct async_icount cnow = priv->icount; + memset(&icount, 0, sizeof(icount)); + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + if (copy_to_user(user_arg, &icount, sizeof(icount))) + return -EFAULT; return 0; + } default: break; @@ -455,6 +474,7 @@ static void ssu100_set_max_packet_size(struct usb_serial_port *port) unsigned num_endpoints; int i; + unsigned long flags; num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints); @@ -466,7 +486,9 @@ static void ssu100_set_max_packet_size(struct usb_serial_port *port) } /* set max packet size based on descriptor */ + spin_lock_irqsave(&priv->status_lock, flags); priv->max_packet_size = ep_desc->wMaxPacketSize; + spin_unlock_irqrestore(&priv->status_lock, flags); dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size); } @@ -485,9 +507,9 @@ static int ssu100_attach(struct usb_serial *serial) return -ENOMEM; } + spin_lock_init(&priv->status_lock); init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(port, priv); - ssu100_set_max_packet_size(port); return ssu100_initdevice(serial->dev); @@ -506,20 +528,20 @@ static int ssu100_tiocmget(struct tty_struct *tty, struct file *file) if (!d) return -ENOMEM; - r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d); + r = ssu100_getregister(dev, 0, UART_MCR, d); if (r < 0) goto mget_out; - r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1); + r = ssu100_getregister(dev, 0, UART_MSR, d+1); if (r < 0) goto mget_out; - r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) | - (d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) | - (d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) | - (d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) | - (d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) | - (d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0); + r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) | + (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) | + (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) | + (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) | + (d[1] & UART_MSR_RI ? TIOCM_RI : 0) | + (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0); mget_out: kfree(d); @@ -546,7 +568,7 @@ static void ssu100_dtr_rts(struct usb_serial_port *port, int on) if (!port->serial->disconnected) { /* Disable flow control */ if (!on && - ssu100_setregister(dev, 0, 0) < 0) + ssu100_setregister(dev, 0, UART_MCR, 0) < 0) dev_err(&port->dev, "error from flowcontrol urb\n"); /* drop RTS and DTR */ if (on) @@ -557,34 +579,88 @@ static void ssu100_dtr_rts(struct usb_serial_port *port, int on) mutex_unlock(&port->serial->disc_mutex); } +static void ssu100_update_msr(struct usb_serial_port *port, u8 msr) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + priv->shadowMSR = msr; + spin_unlock_irqrestore(&priv->status_lock, flags); + + if (msr & UART_MSR_ANY_DELTA) { + /* update input line counters */ + if (msr & UART_MSR_DCTS) + priv->icount.cts++; + if (msr & UART_MSR_DDSR) + priv->icount.dsr++; + if (msr & UART_MSR_DDCD) + priv->icount.dcd++; + if (msr & UART_MSR_TERI) + priv->icount.rng++; + wake_up_interruptible(&priv->delta_msr_wait); + } +} + +static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, + char *tty_flag) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + priv->shadowLSR = lsr; + spin_unlock_irqrestore(&priv->status_lock, flags); + + *tty_flag = TTY_NORMAL; + if (lsr & UART_LSR_BRK_ERROR_BITS) { + /* we always want to update icount, but we only want to + * update tty_flag for one case */ + if (lsr & UART_LSR_BI) { + priv->icount.brk++; + *tty_flag = TTY_BREAK; + usb_serial_handle_break(port); + } + if (lsr & UART_LSR_PE) { + priv->icount.parity++; + if (*tty_flag == TTY_NORMAL) + *tty_flag = TTY_PARITY; + } + if (lsr & UART_LSR_FE) { + priv->icount.frame++; + if (*tty_flag == TTY_NORMAL) + *tty_flag = TTY_FRAME; + } + if (lsr & UART_LSR_OE){ + priv->icount.overrun++; + if (*tty_flag == TTY_NORMAL) + *tty_flag = TTY_OVERRUN; + } + } + +} + static int ssu100_process_packet(struct tty_struct *tty, struct usb_serial_port *port, struct ssu100_port_private *priv, char *packet, int len) { int i; - char flag; + char flag = TTY_NORMAL; char *ch; dbg("%s - port %d", __func__, port->number); - if (len < 4) { - dbg("%s - malformed packet", __func__); - return 0; - } - - if ((packet[0] == 0x1b) && (packet[1] == 0x1b) && + if ((len >= 4) && + (packet[0] == 0x1b) && (packet[1] == 0x1b) && ((packet[2] == 0x00) || (packet[2] == 0x01))) { - if (packet[2] == 0x00) - priv->shadowLSR = packet[3] & (SERIAL_LSR_OE | - SERIAL_LSR_PE | - SERIAL_LSR_FE | - SERIAL_LSR_BI); - - if (packet[2] == 0x01) { - priv->shadowMSR = packet[3]; - wake_up_interruptible(&priv->delta_msr_wait); + if (packet[2] == 0x00) { + ssu100_update_lsr(port, packet[3], &flag); + if (flag == TTY_OVERRUN) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); } + if (packet[2] == 0x01) + ssu100_update_msr(port, packet[3]); len -= 4; ch = packet + 4; @@ -631,7 +707,6 @@ static void ssu100_process_read_urb(struct urb *urb) tty_kref_put(tty); } - static struct usb_serial_driver ssu100_device = { .driver = { .owner = THIS_MODULE, @@ -653,6 +728,7 @@ static struct usb_serial_driver ssu100_device = { .tiocmset = ssu100_tiocmset, .ioctl = ssu100_ioctl, .set_termios = ssu100_set_termios, + .disconnect = usb_serial_generic_disconnect, }; static int __init ssu100_init(void) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 2a982e62963b5b76a7bd894c412690b1ddb9381d..7a2177c79bdefb05fe88d6c67ee5b19cd7fae0f5 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -736,6 +736,7 @@ int usb_serial_probe(struct usb_interface *interface, serial = create_serial(dev, interface, type); if (!serial) { + module_put(type->driver.owner); dev_err(&interface->dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -746,11 +747,11 @@ int usb_serial_probe(struct usb_interface *interface, id = get_iface_id(type, interface); retval = type->probe(serial, id); - module_put(type->driver.owner); if (retval) { dbg("sub driver rejected device"); kfree(serial); + module_put(type->driver.owner); return retval; } } @@ -822,6 +823,7 @@ int usb_serial_probe(struct usb_interface *interface, if (num_bulk_in == 0 || num_bulk_out == 0) { dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n"); kfree(serial); + module_put(type->driver.owner); return -ENODEV; } } @@ -835,22 +837,15 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "Generic device with no bulk out, not allowed.\n"); kfree(serial); + module_put(type->driver.owner); return -EIO; } } #endif if (!num_ports) { /* if this device type has a calc_num_ports function, call it */ - if (type->calc_num_ports) { - if (!try_module_get(type->driver.owner)) { - dev_err(&interface->dev, - "module get failed, exiting\n"); - kfree(serial); - return -EIO; - } + if (type->calc_num_ports) num_ports = type->calc_num_ports(serial); - module_put(type->driver.owner); - } if (!num_ports) num_ports = type->num_ports; } @@ -1039,13 +1034,7 @@ int usb_serial_probe(struct usb_interface *interface, /* if this device type has an attach function, call it */ if (type->attach) { - if (!try_module_get(type->driver.owner)) { - dev_err(&interface->dev, - "module get failed, exiting\n"); - goto probe_error; - } retval = type->attach(serial); - module_put(type->driver.owner); if (retval < 0) goto probe_error; serial->attached = 1; @@ -1088,10 +1077,12 @@ int usb_serial_probe(struct usb_interface *interface, exit: /* success */ usb_set_intfdata(interface, serial); + module_put(type->driver.owner); return 0; probe_error: usb_serial_put(serial); + module_put(type->driver.owner); return -EIO; } EXPORT_SYMBOL_GPL(usb_serial_probe); diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 890bc1472190f2189026e17792750f0f14706ff3..617068134ae8a91cadc1f7ccf42761cf212b5adf 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -247,6 +247,7 @@ int usb_add_config(struct usb_composite_dev *, * value; it should return zero on successful initialization. * @unbind: Reverses @bind(); called as a side effect of unregistering * this driver. + * @disconnect: optional driver disconnect method * @suspend: Notifies when the host stops sending USB traffic, * after function notifications * @resume: Notifies configuration when the host restarts USB traffic,