diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 32d93564a74d4839207fef67859c7bc1f967e3e7..ba56ce4382d9246969d672c299cb7f61dea45abd 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -204,6 +204,14 @@ config USB_NET_DM9601 This option adds support for Davicom DM9601 based USB 1.1 10/100 Ethernet adapters. +config USB_NET_SMSC75XX + tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices" + depends on USB_USBNET + select CRC32 + help + This option adds support for SMSC LAN95XX based USB 2.0 + Gigabit Ethernet adapters. + config USB_NET_SMSC95XX tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices" depends on USB_USBNET diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index e17afb78f37220df2c8c6a13eb420aa14280fd09..82ea62955b56e5188b272bdb071decc44c5da06c 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_USB_NET_AX8817X) += asix.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o +obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o obj-$(CONFIG_USB_NET_NET1080) += net1080.o diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c new file mode 100644 index 0000000000000000000000000000000000000000..300e3e764fa2d74f0bf979570a359b3b3a5d559d --- /dev/null +++ b/drivers/net/usb/smsc75xx.c @@ -0,0 +1,1288 @@ + /*************************************************************************** + * + * Copyright (C) 2007-2010 SMSC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + *****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "smsc75xx.h" + +#define SMSC_CHIPNAME "smsc75xx" +#define SMSC_DRIVER_VERSION "1.0.0" +#define HS_USB_PKT_SIZE (512) +#define FS_USB_PKT_SIZE (64) +#define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE) +#define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE) +#define DEFAULT_BULK_IN_DELAY (0x00002000) +#define MAX_SINGLE_PACKET_SIZE (9000) +#define LAN75XX_EEPROM_MAGIC (0x7500) +#define EEPROM_MAC_OFFSET (0x01) +#define DEFAULT_TX_CSUM_ENABLE (true) +#define DEFAULT_RX_CSUM_ENABLE (true) +#define DEFAULT_TSO_ENABLE (true) +#define SMSC75XX_INTERNAL_PHY_ID (1) +#define SMSC75XX_TX_OVERHEAD (8) +#define MAX_RX_FIFO_SIZE (20 * 1024) +#define MAX_TX_FIFO_SIZE (12 * 1024) +#define USB_VENDOR_ID_SMSC (0x0424) +#define USB_PRODUCT_ID_LAN7500 (0x7500) +#define USB_PRODUCT_ID_LAN7505 (0x7505) + +#define check_warn(ret, fmt, args...) \ + ({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); }) + +#define check_warn_return(ret, fmt, args...) \ + ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } }) + +#define check_warn_goto_done(ret, fmt, args...) \ + ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } }) + +struct smsc75xx_priv { + struct usbnet *dev; + u32 rfe_ctl; + u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN]; + bool use_rx_csum; + struct mutex dataport_mutex; + spinlock_t rfe_ctl_lock; + struct work_struct set_multicast; +}; + +struct usb_context { + struct usb_ctrlrequest req; + struct usbnet *dev; +}; + +static int turbo_mode = true; +module_param(turbo_mode, bool, 0644); +MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); + +static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index, + u32 *data) +{ + u32 *buf = kmalloc(4, GFP_KERNEL); + int ret; + + BUG_ON(!dev); + + if (!buf) + return -ENOMEM; + + ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), + USB_VENDOR_REQUEST_READ_REGISTER, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 00, index, buf, 4, USB_CTRL_GET_TIMEOUT); + + if (unlikely(ret < 0)) + netdev_warn(dev->net, + "Failed to read register index 0x%08x", index); + + le32_to_cpus(buf); + *data = *buf; + kfree(buf); + + return ret; +} + +static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index, + u32 data) +{ + u32 *buf = kmalloc(4, GFP_KERNEL); + int ret; + + BUG_ON(!dev); + + if (!buf) + return -ENOMEM; + + *buf = data; + cpu_to_le32s(buf); + + ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), + USB_VENDOR_REQUEST_WRITE_REGISTER, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 00, index, buf, 4, USB_CTRL_SET_TIMEOUT); + + if (unlikely(ret < 0)) + netdev_warn(dev->net, + "Failed to write register index 0x%08x", index); + + kfree(buf); + + return ret; +} + +/* Loop until the read is completed with timeout + * called with phy_mutex held */ +static int smsc75xx_phy_wait_not_busy(struct usbnet *dev) +{ + unsigned long start_time = jiffies; + u32 val; + int ret; + + do { + ret = smsc75xx_read_reg(dev, MII_ACCESS, &val); + check_warn_return(ret, "Error reading MII_ACCESS"); + + if (!(val & MII_ACCESS_BUSY)) + return 0; + } while (!time_after(jiffies, start_time + HZ)); + + return -EIO; +} + +static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx) +{ + struct usbnet *dev = netdev_priv(netdev); + u32 val, addr; + int ret; + + mutex_lock(&dev->phy_mutex); + + /* confirm MII not busy */ + ret = smsc75xx_phy_wait_not_busy(dev); + check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read"); + + /* set the address, index & direction (read from PHY) */ + phy_id &= dev->mii.phy_id_mask; + idx &= dev->mii.reg_num_mask; + addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) + | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) + | MII_ACCESS_READ; + ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); + check_warn_goto_done(ret, "Error writing MII_ACCESS"); + + ret = smsc75xx_phy_wait_not_busy(dev); + check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx); + + ret = smsc75xx_read_reg(dev, MII_DATA, &val); + check_warn_goto_done(ret, "Error reading MII_DATA"); + + ret = (u16)(val & 0xFFFF); + +done: + mutex_unlock(&dev->phy_mutex); + return ret; +} + +static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx, + int regval) +{ + struct usbnet *dev = netdev_priv(netdev); + u32 val, addr; + int ret; + + mutex_lock(&dev->phy_mutex); + + /* confirm MII not busy */ + ret = smsc75xx_phy_wait_not_busy(dev); + check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write"); + + val = regval; + ret = smsc75xx_write_reg(dev, MII_DATA, val); + check_warn_goto_done(ret, "Error writing MII_DATA"); + + /* set the address, index & direction (write to PHY) */ + phy_id &= dev->mii.phy_id_mask; + idx &= dev->mii.reg_num_mask; + addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) + | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) + | MII_ACCESS_WRITE; + ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); + check_warn_goto_done(ret, "Error writing MII_ACCESS"); + + ret = smsc75xx_phy_wait_not_busy(dev); + check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx); + +done: + mutex_unlock(&dev->phy_mutex); +} + +static int smsc75xx_wait_eeprom(struct usbnet *dev) +{ + unsigned long start_time = jiffies; + u32 val; + int ret; + + do { + ret = smsc75xx_read_reg(dev, E2P_CMD, &val); + check_warn_return(ret, "Error reading E2P_CMD"); + + if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT)) + break; + udelay(40); + } while (!time_after(jiffies, start_time + HZ)); + + if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) { + netdev_warn(dev->net, "EEPROM read operation timeout"); + return -EIO; + } + + return 0; +} + +static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev) +{ + unsigned long start_time = jiffies; + u32 val; + int ret; + + do { + ret = smsc75xx_read_reg(dev, E2P_CMD, &val); + check_warn_return(ret, "Error reading E2P_CMD"); + + if (!(val & E2P_CMD_BUSY)) + return 0; + + udelay(40); + } while (!time_after(jiffies, start_time + HZ)); + + netdev_warn(dev->net, "EEPROM is busy"); + return -EIO; +} + +static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length, + u8 *data) +{ + u32 val; + int i, ret; + + BUG_ON(!dev); + BUG_ON(!data); + + ret = smsc75xx_eeprom_confirm_not_busy(dev); + if (ret) + return ret; + + for (i = 0; i < length; i++) { + val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR); + ret = smsc75xx_write_reg(dev, E2P_CMD, val); + check_warn_return(ret, "Error writing E2P_CMD"); + + ret = smsc75xx_wait_eeprom(dev); + if (ret < 0) + return ret; + + ret = smsc75xx_read_reg(dev, E2P_DATA, &val); + check_warn_return(ret, "Error reading E2P_DATA"); + + data[i] = val & 0xFF; + offset++; + } + + return 0; +} + +static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length, + u8 *data) +{ + u32 val; + int i, ret; + + BUG_ON(!dev); + BUG_ON(!data); + + ret = smsc75xx_eeprom_confirm_not_busy(dev); + if (ret) + return ret; + + /* Issue write/erase enable command */ + val = E2P_CMD_BUSY | E2P_CMD_EWEN; + ret = smsc75xx_write_reg(dev, E2P_CMD, val); + check_warn_return(ret, "Error writing E2P_CMD"); + + ret = smsc75xx_wait_eeprom(dev); + if (ret < 0) + return ret; + + for (i = 0; i < length; i++) { + + /* Fill data register */ + val = data[i]; + ret = smsc75xx_write_reg(dev, E2P_DATA, val); + check_warn_return(ret, "Error writing E2P_DATA"); + + /* Send "write" command */ + val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR); + ret = smsc75xx_write_reg(dev, E2P_CMD, val); + check_warn_return(ret, "Error writing E2P_CMD"); + + ret = smsc75xx_wait_eeprom(dev); + if (ret < 0) + return ret; + + offset++; + } + + return 0; +} + +static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev) +{ + int i, ret; + + for (i = 0; i < 100; i++) { + u32 dp_sel; + ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel); + check_warn_return(ret, "Error reading DP_SEL"); + + if (dp_sel & DP_SEL_DPRDY) + return 0; + + udelay(40); + } + + netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out"); + + return -EIO; +} + +static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr, + u32 length, u32 *buf) +{ + struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); + u32 dp_sel; + int i, ret; + + mutex_lock(&pdata->dataport_mutex); + + ret = smsc75xx_dataport_wait_not_busy(dev); + check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry"); + + ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel); + check_warn_goto_done(ret, "Error reading DP_SEL"); + + dp_sel &= ~DP_SEL_RSEL; + dp_sel |= ram_select; + ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel); + check_warn_goto_done(ret, "Error writing DP_SEL"); + + for (i = 0; i < length; i++) { + ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i); + check_warn_goto_done(ret, "Error writing DP_ADDR"); + + ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]); + check_warn_goto_done(ret, "Error writing DP_DATA"); + + ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE); + check_warn_goto_done(ret, "Error writing DP_CMD"); + + ret = smsc75xx_dataport_wait_not_busy(dev); + check_warn_goto_done(ret, "smsc75xx_dataport_write timeout"); + } + +done: + mutex_unlock(&pdata->dataport_mutex); + return ret; +} + +/* returns hash bit number for given MAC address */ +static u32 smsc75xx_hash(char addr[ETH_ALEN]) +{ + return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff; +} + +static void smsc75xx_deferred_multicast_write(struct work_struct *param) +{ + struct smsc75xx_priv *pdata = + container_of(param, struct smsc75xx_priv, set_multicast); + struct usbnet *dev = pdata->dev; + int ret; + + netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x", + pdata->rfe_ctl); + + smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN, + DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table); + + ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); + check_warn(ret, "Error writing RFE_CRL"); +} + +static void smsc75xx_set_multicast(struct net_device *netdev) +{ + struct usbnet *dev = netdev_priv(netdev); + struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); + unsigned long flags; + int i; + + spin_lock_irqsave(&pdata->rfe_ctl_lock, flags); + + pdata->rfe_ctl &= + ~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF); + pdata->rfe_ctl |= RFE_CTL_AB; + + for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++) + pdata->multicast_hash_table[i] = 0; + + if (dev->net->flags & IFF_PROMISC) { + netif_dbg(dev, drv, dev->net, "promiscuous mode enabled"); + pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU; + } else if (dev->net->flags & IFF_ALLMULTI) { + netif_dbg(dev, drv, dev->net, "receive all multicast enabled"); + pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF; + } else if (!netdev_mc_empty(dev->net)) { + struct dev_mc_list *mc_list; + + netif_dbg(dev, drv, dev->net, "receive multicast hash filter"); + + pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF; + + netdev_for_each_mc_addr(mc_list, netdev) { + u32 bitnum = smsc75xx_hash(mc_list->dmi_addr); + pdata->multicast_hash_table[bitnum / 32] |= + (1 << (bitnum % 32)); + } + } else { + netif_dbg(dev, drv, dev->net, "receive own packets only"); + pdata->rfe_ctl |= RFE_CTL_DPF; + } + + spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags); + + /* defer register writes to a sleepable context */ + schedule_work(&pdata->set_multicast); +} + +static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex, + u16 lcladv, u16 rmtadv) +{ + u32 flow = 0, fct_flow = 0; + int ret; + + if (duplex == DUPLEX_FULL) { + u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); + + if (cap & FLOW_CTRL_TX) { + flow = (FLOW_TX_FCEN | 0xFFFF); + /* set fct_flow thresholds to 20% and 80% */ + fct_flow = (8 << 8) | 32; + } + + if (cap & FLOW_CTRL_RX) + flow |= FLOW_RX_FCEN; + + netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s", + (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), + (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); + } else { + netif_dbg(dev, link, dev->net, "half duplex"); + } + + ret = smsc75xx_write_reg(dev, FLOW, flow); + check_warn_return(ret, "Error writing FLOW"); + + ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow); + check_warn_return(ret, "Error writing FCT_FLOW"); + + return 0; +} + +static int smsc75xx_link_reset(struct usbnet *dev) +{ + struct mii_if_info *mii = &dev->mii; + struct ethtool_cmd ecmd; + u16 lcladv, rmtadv; + int ret; + + /* clear interrupt status */ + ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); + check_warn_return(ret, "Error reading PHY_INT_SRC"); + + ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); + check_warn_return(ret, "Error writing INT_STS"); + + mii_check_media(mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE); + rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA); + + netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x" + " rmtadv: %04x", ecmd.speed, ecmd.duplex, lcladv, rmtadv); + + return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv); +} + +static void smsc75xx_status(struct usbnet *dev, struct urb *urb) +{ + u32 intdata; + + if (urb->actual_length != 4) { + netdev_warn(dev->net, + "unexpected urb length %d", urb->actual_length); + return; + } + + memcpy(&intdata, urb->transfer_buffer, 4); + le32_to_cpus(&intdata); + + netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata); + + if (intdata & INT_ENP_PHY_INT) + usbnet_defer_kevent(dev, EVENT_LINK_RESET); + else + netdev_warn(dev->net, + "unexpected interrupt, intdata=0x%08X", intdata); +} + +/* Enable or disable Rx checksum offload engine */ +static int smsc75xx_set_rx_csum_offload(struct usbnet *dev) +{ + struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); + unsigned long flags; + int ret; + + spin_lock_irqsave(&pdata->rfe_ctl_lock, flags); + + if (pdata->use_rx_csum) + pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM; + else + pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM); + + spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags); + + ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); + check_warn_return(ret, "Error writing RFE_CTL"); + + return 0; +} + +static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net) +{ + return MAX_EEPROM_SIZE; +} + +static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *ee, u8 *data) +{ + struct usbnet *dev = netdev_priv(netdev); + + ee->magic = LAN75XX_EEPROM_MAGIC; + + return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data); +} + +static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *ee, u8 *data) +{ + struct usbnet *dev = netdev_priv(netdev); + + if (ee->magic != LAN75XX_EEPROM_MAGIC) { + netdev_warn(dev->net, + "EEPROM: magic value mismatch: 0x%x", ee->magic); + return -EINVAL; + } + + return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data); +} + +static u32 smsc75xx_ethtool_get_rx_csum(struct net_device *netdev) +{ + struct usbnet *dev = netdev_priv(netdev); + struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); + + return pdata->use_rx_csum; +} + +static int smsc75xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val) +{ + struct usbnet *dev = netdev_priv(netdev); + struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); + + pdata->use_rx_csum = !!val; + + return smsc75xx_set_rx_csum_offload(dev); +} + +static int smsc75xx_ethtool_set_tso(struct net_device *netdev, u32 data) +{ + if (data) + netdev->features |= NETIF_F_TSO | NETIF_F_TSO6; + else + netdev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6); + + return 0; +} + +static const struct ethtool_ops smsc75xx_ethtool_ops = { + .get_link = usbnet_get_link, + .nway_reset = usbnet_nway_reset, + .get_drvinfo = usbnet_get_drvinfo, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .get_eeprom_len = smsc75xx_ethtool_get_eeprom_len, + .get_eeprom = smsc75xx_ethtool_get_eeprom, + .set_eeprom = smsc75xx_ethtool_set_eeprom, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, + .get_rx_csum = smsc75xx_ethtool_get_rx_csum, + .set_rx_csum = smsc75xx_ethtool_set_rx_csum, + .get_tso = ethtool_op_get_tso, + .set_tso = smsc75xx_ethtool_set_tso, +}; + +static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) +{ + struct usbnet *dev = netdev_priv(netdev); + + if (!netif_running(netdev)) + return -EINVAL; + + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); +} + +static void smsc75xx_init_mac_address(struct usbnet *dev) +{ + /* try reading mac address from EEPROM */ + if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, + dev->net->dev_addr) == 0) { + if (is_valid_ether_addr(dev->net->dev_addr)) { + /* eeprom values are valid so use them */ + netif_dbg(dev, ifup, dev->net, + "MAC address read from EEPROM"); + return; + } + } + + /* no eeprom, or eeprom values are invalid. generate random MAC */ + random_ether_addr(dev->net->dev_addr); + netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr"); +} + +static int smsc75xx_set_mac_address(struct usbnet *dev) +{ + u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 | + dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24; + u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8; + + int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi); + check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret); + + ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo); + check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret); + + addr_hi |= ADDR_FILTX_FB_VALID; + ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi); + check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret); + + ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo); + check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret); + + return 0; +} + +static int smsc75xx_phy_initialize(struct usbnet *dev) +{ + int bmcr, timeout = 0; + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = smsc75xx_mdio_read; + dev->mii.mdio_write = smsc75xx_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID; + + /* reset phy and wait for reset to complete */ + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + + do { + msleep(10); + bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); + check_warn_return(bmcr, "Error reading MII_BMCR"); + timeout++; + } while ((bmcr & MII_BMCR) && (timeout < 100)); + + if (timeout >= 100) { + netdev_warn(dev->net, "timeout on PHY Reset"); + return -EIO; + } + + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + + /* read to clear */ + smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); + check_warn_return(bmcr, "Error reading PHY_INT_SRC"); + + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, + PHY_INT_MASK_DEFAULT); + mii_nway_restart(&dev->mii); + + netif_dbg(dev, ifup, dev->net, "phy initialised successfully"); + return 0; +} + +static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size) +{ + int ret = 0; + u32 buf; + bool rxenabled; + + ret = smsc75xx_read_reg(dev, MAC_RX, &buf); + check_warn_return(ret, "Failed to read MAC_RX: %d", ret); + + rxenabled = ((buf & MAC_RX_RXEN) != 0); + + if (rxenabled) { + buf &= ~MAC_RX_RXEN; + ret = smsc75xx_write_reg(dev, MAC_RX, buf); + check_warn_return(ret, "Failed to write MAC_RX: %d", ret); + } + + /* add 4 to size for FCS */ + buf &= ~MAC_RX_MAX_SIZE; + buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE); + + ret = smsc75xx_write_reg(dev, MAC_RX, buf); + check_warn_return(ret, "Failed to write MAC_RX: %d", ret); + + if (rxenabled) { + buf |= MAC_RX_RXEN; + ret = smsc75xx_write_reg(dev, MAC_RX, buf); + check_warn_return(ret, "Failed to write MAC_RX: %d", ret); + } + + return 0; +} + +static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct usbnet *dev = netdev_priv(netdev); + + int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu); + check_warn_return(ret, "Failed to set mac rx frame length"); + + return usbnet_change_mtu(netdev, new_mtu); +} + +static int smsc75xx_reset(struct usbnet *dev) +{ + struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); + u32 buf; + int ret = 0, timeout; + + netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset"); + + ret = smsc75xx_read_reg(dev, HW_CFG, &buf); + check_warn_return(ret, "Failed to read HW_CFG: %d", ret); + + buf |= HW_CFG_LRST; + + ret = smsc75xx_write_reg(dev, HW_CFG, buf); + check_warn_return(ret, "Failed to write HW_CFG: %d", ret); + + timeout = 0; + do { + msleep(10); + ret = smsc75xx_read_reg(dev, HW_CFG, &buf); + check_warn_return(ret, "Failed to read HW_CFG: %d", ret); + timeout++; + } while ((buf & HW_CFG_LRST) && (timeout < 100)); + + if (timeout >= 100) { + netdev_warn(dev->net, "timeout on completion of Lite Reset"); + return -EIO; + } + + netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY"); + + ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); + check_warn_return(ret, "Failed to read PMT_CTL: %d", ret); + + buf |= PMT_CTL_PHY_RST; + + ret = smsc75xx_write_reg(dev, PMT_CTL, buf); + check_warn_return(ret, "Failed to write PMT_CTL: %d", ret); + + timeout = 0; + do { + msleep(10); + ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); + check_warn_return(ret, "Failed to read PMT_CTL: %d", ret); + timeout++; + } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100)); + + if (timeout >= 100) { + netdev_warn(dev->net, "timeout waiting for PHY Reset"); + return -EIO; + } + + netif_dbg(dev, ifup, dev->net, "PHY reset complete"); + + smsc75xx_init_mac_address(dev); + + ret = smsc75xx_set_mac_address(dev); + check_warn_return(ret, "Failed to set mac address"); + + netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr); + + ret = smsc75xx_read_reg(dev, HW_CFG, &buf); + check_warn_return(ret, "Failed to read HW_CFG: %d", ret); + + netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf); + + buf |= HW_CFG_BIR; + + ret = smsc75xx_write_reg(dev, HW_CFG, buf); + check_warn_return(ret, "Failed to write HW_CFG: %d", ret); + + ret = smsc75xx_read_reg(dev, HW_CFG, &buf); + check_warn_return(ret, "Failed to read HW_CFG: %d", ret); + + netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after " + "writing HW_CFG_BIR: 0x%08x", buf); + + if (!turbo_mode) { + buf = 0; + dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE; + } else if (dev->udev->speed == USB_SPEED_HIGH) { + buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; + dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; + } else { + buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; + dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; + } + + netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld", + (ulong)dev->rx_urb_size); + + ret = smsc75xx_write_reg(dev, BURST_CAP, buf); + check_warn_return(ret, "Failed to write BURST_CAP: %d", ret); + + ret = smsc75xx_read_reg(dev, BURST_CAP, &buf); + check_warn_return(ret, "Failed to read BURST_CAP: %d", ret); + + netif_dbg(dev, ifup, dev->net, + "Read Value from BURST_CAP after writing: 0x%08x", buf); + + ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY); + check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret); + + ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf); + check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret); + + netif_dbg(dev, ifup, dev->net, + "Read Value from BULK_IN_DLY after writing: 0x%08x", buf); + + if (turbo_mode) { + ret = smsc75xx_read_reg(dev, HW_CFG, &buf); + check_warn_return(ret, "Failed to read HW_CFG: %d", ret); + + netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf); + + buf |= (HW_CFG_MEF | HW_CFG_BCE); + + ret = smsc75xx_write_reg(dev, HW_CFG, buf); + check_warn_return(ret, "Failed to write HW_CFG: %d", ret); + + ret = smsc75xx_read_reg(dev, HW_CFG, &buf); + check_warn_return(ret, "Failed to read HW_CFG: %d", ret); + + netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf); + } + + /* set FIFO sizes */ + buf = (MAX_RX_FIFO_SIZE - 512) / 512; + ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf); + check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret); + + netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf); + + buf = (MAX_TX_FIFO_SIZE - 512) / 512; + ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf); + check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret); + + netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf); + + ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); + check_warn_return(ret, "Failed to write INT_STS: %d", ret); + + ret = smsc75xx_read_reg(dev, ID_REV, &buf); + check_warn_return(ret, "Failed to read ID_REV: %d", ret); + + netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf); + + /* Configure GPIO pins as LED outputs */ + ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf); + check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret); + + buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL); + buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL; + + ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf); + check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret); + + ret = smsc75xx_write_reg(dev, FLOW, 0); + check_warn_return(ret, "Failed to write FLOW: %d", ret); + + ret = smsc75xx_write_reg(dev, FCT_FLOW, 0); + check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret); + + /* Don't need rfe_ctl_lock during initialisation */ + ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl); + check_warn_return(ret, "Failed to read RFE_CTL: %d", ret); + + pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF; + + ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); + check_warn_return(ret, "Failed to write RFE_CTL: %d", ret); + + ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl); + check_warn_return(ret, "Failed to read RFE_CTL: %d", ret); + + netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl); + + /* Enable or disable checksum offload engines */ + ethtool_op_set_tx_hw_csum(dev->net, DEFAULT_TX_CSUM_ENABLE); + ret = smsc75xx_set_rx_csum_offload(dev); + check_warn_return(ret, "Failed to set rx csum offload: %d", ret); + + smsc75xx_ethtool_set_tso(dev->net, DEFAULT_TSO_ENABLE); + + smsc75xx_set_multicast(dev->net); + + ret = smsc75xx_phy_initialize(dev); + check_warn_return(ret, "Failed to initialize PHY: %d", ret); + + ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf); + check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret); + + /* enable PHY interrupts */ + buf |= INT_ENP_PHY_INT; + + ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf); + check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret); + + ret = smsc75xx_read_reg(dev, MAC_TX, &buf); + check_warn_return(ret, "Failed to read MAC_TX: %d", ret); + + buf |= MAC_TX_TXEN; + + ret = smsc75xx_write_reg(dev, MAC_TX, buf); + check_warn_return(ret, "Failed to write MAC_TX: %d", ret); + + netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf); + + ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf); + check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret); + + buf |= FCT_TX_CTL_EN; + + ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf); + check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret); + + netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf); + + ret = smsc75xx_set_rx_max_frame_length(dev, 1514); + check_warn_return(ret, "Failed to set max rx frame length"); + + ret = smsc75xx_read_reg(dev, MAC_RX, &buf); + check_warn_return(ret, "Failed to read MAC_RX: %d", ret); + + buf |= MAC_RX_RXEN; + + ret = smsc75xx_write_reg(dev, MAC_RX, buf); + check_warn_return(ret, "Failed to write MAC_RX: %d", ret); + + netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf); + + ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf); + check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret); + + buf |= FCT_RX_CTL_EN; + + ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf); + check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret); + + netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf); + + netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0"); + return 0; +} + +static const struct net_device_ops smsc75xx_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = smsc75xx_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = smsc75xx_ioctl, + .ndo_set_multicast_list = smsc75xx_set_multicast, +}; + +static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf) +{ + struct smsc75xx_priv *pdata = NULL; + int ret; + + printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n"); + + ret = usbnet_get_endpoints(dev, intf); + check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret); + + dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv), + GFP_KERNEL); + + pdata = (struct smsc75xx_priv *)(dev->data[0]); + if (!pdata) { + netdev_warn(dev->net, "Unable to allocate smsc75xx_priv"); + return -ENOMEM; + } + + pdata->dev = dev; + + spin_lock_init(&pdata->rfe_ctl_lock); + mutex_init(&pdata->dataport_mutex); + + INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write); + + pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE; + + /* We have to advertise SG otherwise TSO cannot be enabled */ + dev->net->features |= NETIF_F_SG; + + /* Init all registers */ + ret = smsc75xx_reset(dev); + + dev->net->netdev_ops = &smsc75xx_netdev_ops; + dev->net->ethtool_ops = &smsc75xx_ethtool_ops; + dev->net->flags |= IFF_MULTICAST; + dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD; + return 0; +} + +static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf) +{ + struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); + if (pdata) { + netif_dbg(dev, ifdown, dev->net, "free pdata"); + kfree(pdata); + pdata = NULL; + dev->data[0] = 0; + } +} + +static void smsc75xx_rx_csum_offload(struct sk_buff *skb, u32 rx_cmd_a, + u32 rx_cmd_b) +{ + if (unlikely(rx_cmd_a & RX_CMD_A_LCSM)) { + skb->ip_summed = CHECKSUM_NONE; + } else { + skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT)); + skb->ip_summed = CHECKSUM_COMPLETE; + } +} + +static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); + + while (skb->len > 0) { + u32 rx_cmd_a, rx_cmd_b, align_count, size; + struct sk_buff *ax_skb; + unsigned char *packet; + + memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a)); + le32_to_cpus(&rx_cmd_a); + skb_pull(skb, 4); + + memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b)); + le32_to_cpus(&rx_cmd_b); + skb_pull(skb, 4 + NET_IP_ALIGN); + + packet = skb->data; + + /* get the packet length */ + size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN; + align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4; + + if (unlikely(rx_cmd_a & RX_CMD_A_RED)) { + netif_dbg(dev, rx_err, dev->net, + "Error rx_cmd_a=0x%08x", rx_cmd_a); + dev->net->stats.rx_errors++; + dev->net->stats.rx_dropped++; + + if (rx_cmd_a & RX_CMD_A_FCS) + dev->net->stats.rx_crc_errors++; + else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT)) + dev->net->stats.rx_frame_errors++; + } else { + /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */ + if (unlikely(size > (ETH_FRAME_LEN + 12))) { + netif_dbg(dev, rx_err, dev->net, + "size err rx_cmd_a=0x%08x", rx_cmd_a); + return 0; + } + + /* last frame in this batch */ + if (skb->len == size) { + if (pdata->use_rx_csum) + smsc75xx_rx_csum_offload(skb, rx_cmd_a, + rx_cmd_b); + else + skb->ip_summed = CHECKSUM_NONE; + + skb_trim(skb, skb->len - 4); /* remove fcs */ + skb->truesize = size + sizeof(struct sk_buff); + + return 1; + } + + ax_skb = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!ax_skb)) { + netdev_warn(dev->net, "Error allocating skb"); + return 0; + } + + ax_skb->len = size; + ax_skb->data = packet; + skb_set_tail_pointer(ax_skb, size); + + if (pdata->use_rx_csum) + smsc75xx_rx_csum_offload(ax_skb, rx_cmd_a, + rx_cmd_b); + else + ax_skb->ip_summed = CHECKSUM_NONE; + + skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ + ax_skb->truesize = size + sizeof(struct sk_buff); + + usbnet_skb_return(dev, ax_skb); + } + + skb_pull(skb, size); + + /* padding bytes before the next frame starts */ + if (skb->len) + skb_pull(skb, align_count); + } + + if (unlikely(skb->len < 0)) { + netdev_warn(dev->net, "invalid rx length<0 %d", skb->len); + return 0; + } + + return 1; +} + +static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev, + struct sk_buff *skb, gfp_t flags) +{ + u32 tx_cmd_a, tx_cmd_b; + + skb_linearize(skb); + + if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) { + struct sk_buff *skb2 = + skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS; + + if (skb->ip_summed == CHECKSUM_PARTIAL) + tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE; + + if (skb_is_gso(skb)) { + u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN); + tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS; + + tx_cmd_a |= TX_CMD_A_LSO; + } else { + tx_cmd_b = 0; + } + + skb_push(skb, 4); + cpu_to_le32s(&tx_cmd_b); + memcpy(skb->data, &tx_cmd_b, 4); + + skb_push(skb, 4); + cpu_to_le32s(&tx_cmd_a); + memcpy(skb->data, &tx_cmd_a, 4); + + return skb; +} + +static const struct driver_info smsc75xx_info = { + .description = "smsc75xx USB 2.0 Gigabit Ethernet", + .bind = smsc75xx_bind, + .unbind = smsc75xx_unbind, + .link_reset = smsc75xx_link_reset, + .reset = smsc75xx_reset, + .rx_fixup = smsc75xx_rx_fixup, + .tx_fixup = smsc75xx_tx_fixup, + .status = smsc75xx_status, + .flags = FLAG_ETHER | FLAG_SEND_ZLP, +}; + +static const struct usb_device_id products[] = { + { + /* SMSC7500 USB Gigabit Ethernet Device */ + USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500), + .driver_info = (unsigned long) &smsc75xx_info, + }, + { + /* SMSC7500 USB Gigabit Ethernet Device */ + USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505), + .driver_info = (unsigned long) &smsc75xx_info, + }, + { }, /* END */ +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver smsc75xx_driver = { + .name = SMSC_CHIPNAME, + .id_table = products, + .probe = usbnet_probe, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .disconnect = usbnet_disconnect, +}; + +static int __init smsc75xx_init(void) +{ + return usb_register(&smsc75xx_driver); +} +module_init(smsc75xx_init); + +static void __exit smsc75xx_exit(void) +{ + usb_deregister(&smsc75xx_driver); +} +module_exit(smsc75xx_exit); + +MODULE_AUTHOR("Nancy Lin"); +MODULE_AUTHOR("Steve Glendinning "); +MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/smsc75xx.h b/drivers/net/usb/smsc75xx.h new file mode 100644 index 0000000000000000000000000000000000000000..16e98c7783442114b14c74dc4793bd722c784546 --- /dev/null +++ b/drivers/net/usb/smsc75xx.h @@ -0,0 +1,421 @@ + /*************************************************************************** + * + * Copyright (C) 2007-2010 SMSC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + *****************************************************************************/ + +#ifndef _SMSC75XX_H +#define _SMSC75XX_H + +/* Tx command words */ +#define TX_CMD_A_LSO (0x08000000) +#define TX_CMD_A_IPE (0x04000000) +#define TX_CMD_A_TPE (0x02000000) +#define TX_CMD_A_IVTG (0x01000000) +#define TX_CMD_A_RVTG (0x00800000) +#define TX_CMD_A_FCS (0x00400000) +#define TX_CMD_A_LEN (0x000FFFFF) + +#define TX_CMD_B_MSS (0x3FFF0000) +#define TX_CMD_B_MSS_SHIFT (16) +#define TX_MSS_MIN ((u16)8) +#define TX_CMD_B_VTAG (0x0000FFFF) + +/* Rx command words */ +#define RX_CMD_A_ICE (0x80000000) +#define RX_CMD_A_TCE (0x40000000) +#define RX_CMD_A_IPV (0x20000000) +#define RX_CMD_A_PID (0x18000000) +#define RX_CMD_A_PID_NIP (0x00000000) +#define RX_CMD_A_PID_TCP (0x08000000) +#define RX_CMD_A_PID_UDP (0x10000000) +#define RX_CMD_A_PID_PP (0x18000000) +#define RX_CMD_A_PFF (0x04000000) +#define RX_CMD_A_BAM (0x02000000) +#define RX_CMD_A_MAM (0x01000000) +#define RX_CMD_A_FVTG (0x00800000) +#define RX_CMD_A_RED (0x00400000) +#define RX_CMD_A_RWT (0x00200000) +#define RX_CMD_A_RUNT (0x00100000) +#define RX_CMD_A_LONG (0x00080000) +#define RX_CMD_A_RXE (0x00040000) +#define RX_CMD_A_DRB (0x00020000) +#define RX_CMD_A_FCS (0x00010000) +#define RX_CMD_A_UAM (0x00008000) +#define RX_CMD_A_LCSM (0x00004000) +#define RX_CMD_A_LEN (0x00003FFF) + +#define RX_CMD_B_CSUM (0xFFFF0000) +#define RX_CMD_B_CSUM_SHIFT (16) +#define RX_CMD_B_VTAG (0x0000FFFF) + +/* SCSRs */ +#define ID_REV (0x0000) + +#define FPGA_REV (0x0004) + +#define BOND_CTL (0x0008) + +#define INT_STS (0x000C) +#define INT_STS_RDFO_INT (0x00400000) +#define INT_STS_TXE_INT (0x00200000) +#define INT_STS_MACRTO_INT (0x00100000) +#define INT_STS_TX_DIS_INT (0x00080000) +#define INT_STS_RX_DIS_INT (0x00040000) +#define INT_STS_PHY_INT_ (0x00020000) +#define INT_STS_MAC_ERR_INT (0x00008000) +#define INT_STS_TDFU (0x00004000) +#define INT_STS_TDFO (0x00002000) +#define INT_STS_GPIOS (0x00000FFF) +#define INT_STS_CLEAR_ALL (0xFFFFFFFF) + +#define HW_CFG (0x0010) +#define HW_CFG_SMDET_STS (0x00008000) +#define HW_CFG_SMDET_EN (0x00004000) +#define HW_CFG_EEM (0x00002000) +#define HW_CFG_RST_PROTECT (0x00001000) +#define HW_CFG_PORT_SWAP (0x00000800) +#define HW_CFG_PHY_BOOST (0x00000600) +#define HW_CFG_PHY_BOOST_NORMAL (0x00000000) +#define HW_CFG_PHY_BOOST_4 (0x00002000) +#define HW_CFG_PHY_BOOST_8 (0x00004000) +#define HW_CFG_PHY_BOOST_12 (0x00006000) +#define HW_CFG_LEDB (0x00000100) +#define HW_CFG_BIR (0x00000080) +#define HW_CFG_SBP (0x00000040) +#define HW_CFG_IME (0x00000020) +#define HW_CFG_MEF (0x00000010) +#define HW_CFG_ETC (0x00000008) +#define HW_CFG_BCE (0x00000004) +#define HW_CFG_LRST (0x00000002) +#define HW_CFG_SRST (0x00000001) + +#define PMT_CTL (0x0014) +#define PMT_CTL_PHY_PWRUP (0x00000400) +#define PMT_CTL_RES_CLR_WKP_EN (0x00000100) +#define PMT_CTL_DEV_RDY (0x00000080) +#define PMT_CTL_SUS_MODE (0x00000060) +#define PMT_CTL_SUS_MODE_0 (0x00000000) +#define PMT_CTL_SUS_MODE_1 (0x00000020) +#define PMT_CTL_SUS_MODE_2 (0x00000040) +#define PMT_CTL_SUS_MODE_3 (0x00000060) +#define PMT_CTL_PHY_RST (0x00000010) +#define PMT_CTL_WOL_EN (0x00000008) +#define PMT_CTL_ED_EN (0x00000004) +#define PMT_CTL_WUPS (0x00000003) +#define PMT_CTL_WUPS_NO (0x00000000) +#define PMT_CTL_WUPS_ED (0x00000001) +#define PMT_CTL_WUPS_WOL (0x00000002) +#define PMT_CTL_WUPS_MULTI (0x00000003) + +#define LED_GPIO_CFG (0x0018) +#define LED_GPIO_CFG_LED2_FUN_SEL (0x80000000) +#define LED_GPIO_CFG_LED10_FUN_SEL (0x40000000) +#define LED_GPIO_CFG_LEDGPIO_EN (0x0000F000) +#define LED_GPIO_CFG_LEDGPIO_EN_0 (0x00001000) +#define LED_GPIO_CFG_LEDGPIO_EN_1 (0x00002000) +#define LED_GPIO_CFG_LEDGPIO_EN_2 (0x00004000) +#define LED_GPIO_CFG_LEDGPIO_EN_3 (0x00008000) +#define LED_GPIO_CFG_GPBUF (0x00000F00) +#define LED_GPIO_CFG_GPBUF_0 (0x00000100) +#define LED_GPIO_CFG_GPBUF_1 (0x00000200) +#define LED_GPIO_CFG_GPBUF_2 (0x00000400) +#define LED_GPIO_CFG_GPBUF_3 (0x00000800) +#define LED_GPIO_CFG_GPDIR (0x000000F0) +#define LED_GPIO_CFG_GPDIR_0 (0x00000010) +#define LED_GPIO_CFG_GPDIR_1 (0x00000020) +#define LED_GPIO_CFG_GPDIR_2 (0x00000040) +#define LED_GPIO_CFG_GPDIR_3 (0x00000080) +#define LED_GPIO_CFG_GPDATA (0x0000000F) +#define LED_GPIO_CFG_GPDATA_0 (0x00000001) +#define LED_GPIO_CFG_GPDATA_1 (0x00000002) +#define LED_GPIO_CFG_GPDATA_2 (0x00000004) +#define LED_GPIO_CFG_GPDATA_3 (0x00000008) + +#define GPIO_CFG (0x001C) +#define GPIO_CFG_SHIFT (24) +#define GPIO_CFG_GPEN (0xFF000000) +#define GPIO_CFG_GPBUF (0x00FF0000) +#define GPIO_CFG_GPDIR (0x0000FF00) +#define GPIO_CFG_GPDATA (0x000000FF) + +#define GPIO_WAKE (0x0020) +#define GPIO_WAKE_PHY_LINKUP_EN (0x80000000) +#define GPIO_WAKE_POL (0x0FFF0000) +#define GPIO_WAKE_POL_SHIFT (16) +#define GPIO_WAKE_WK (0x00000FFF) + +#define DP_SEL (0x0024) +#define DP_SEL_DPRDY (0x80000000) +#define DP_SEL_RSEL (0x0000000F) +#define DP_SEL_URX (0x00000000) +#define DP_SEL_VHF (0x00000001) +#define DP_SEL_VHF_HASH_LEN (16) +#define DP_SEL_VHF_VLAN_LEN (128) +#define DP_SEL_LSO_HEAD (0x00000002) +#define DP_SEL_FCT_RX (0x00000003) +#define DP_SEL_FCT_TX (0x00000004) +#define DP_SEL_DESCRIPTOR (0x00000005) +#define DP_SEL_WOL (0x00000006) + +#define DP_CMD (0x0028) +#define DP_CMD_WRITE (0x01) +#define DP_CMD_READ (0x00) + +#define DP_ADDR (0x002C) + +#define DP_DATA (0x0030) + +#define BURST_CAP (0x0034) +#define BURST_CAP_MASK (0x0000000F) + +#define INT_EP_CTL (0x0038) +#define INT_EP_CTL_INTEP_ON (0x80000000) +#define INT_EP_CTL_RDFO_EN (0x00400000) +#define INT_EP_CTL_TXE_EN (0x00200000) +#define INT_EP_CTL_MACROTO_EN (0x00100000) +#define INT_EP_CTL_TX_DIS_EN (0x00080000) +#define INT_EP_CTL_RX_DIS_EN (0x00040000) +#define INT_EP_CTL_PHY_EN_ (0x00020000) +#define INT_EP_CTL_MAC_ERR_EN (0x00008000) +#define INT_EP_CTL_TDFU_EN (0x00004000) +#define INT_EP_CTL_TDFO_EN (0x00002000) +#define INT_EP_CTL_RX_FIFO_EN (0x00001000) +#define INT_EP_CTL_GPIOX_EN (0x00000FFF) + +#define BULK_IN_DLY (0x003C) +#define BULK_IN_DLY_MASK (0xFFFF) + +#define E2P_CMD (0x0040) +#define E2P_CMD_BUSY (0x80000000) +#define E2P_CMD_MASK (0x70000000) +#define E2P_CMD_READ (0x00000000) +#define E2P_CMD_EWDS (0x10000000) +#define E2P_CMD_EWEN (0x20000000) +#define E2P_CMD_WRITE (0x30000000) +#define E2P_CMD_WRAL (0x40000000) +#define E2P_CMD_ERASE (0x50000000) +#define E2P_CMD_ERAL (0x60000000) +#define E2P_CMD_RELOAD (0x70000000) +#define E2P_CMD_TIMEOUT (0x00000400) +#define E2P_CMD_LOADED (0x00000200) +#define E2P_CMD_ADDR (0x000001FF) + +#define MAX_EEPROM_SIZE (512) + +#define E2P_DATA (0x0044) +#define E2P_DATA_MASK_ (0x000000FF) + +#define RFE_CTL (0x0060) +#define RFE_CTL_TCPUDP_CKM (0x00001000) +#define RFE_CTL_IP_CKM (0x00000800) +#define RFE_CTL_AB (0x00000400) +#define RFE_CTL_AM (0x00000200) +#define RFE_CTL_AU (0x00000100) +#define RFE_CTL_VS (0x00000080) +#define RFE_CTL_UF (0x00000040) +#define RFE_CTL_VF (0x00000020) +#define RFE_CTL_SPF (0x00000010) +#define RFE_CTL_MHF (0x00000008) +#define RFE_CTL_DHF (0x00000004) +#define RFE_CTL_DPF (0x00000002) +#define RFE_CTL_RST_RF (0x00000001) + +#define VLAN_TYPE (0x0064) +#define VLAN_TYPE_MASK (0x0000FFFF) + +#define FCT_RX_CTL (0x0090) +#define FCT_RX_CTL_EN (0x80000000) +#define FCT_RX_CTL_RST (0x40000000) +#define FCT_RX_CTL_SBF (0x02000000) +#define FCT_RX_CTL_OVERFLOW (0x01000000) +#define FCT_RX_CTL_FRM_DROP (0x00800000) +#define FCT_RX_CTL_RX_NOT_EMPTY (0x00400000) +#define FCT_RX_CTL_RX_EMPTY (0x00200000) +#define FCT_RX_CTL_RX_DISABLED (0x00100000) +#define FCT_RX_CTL_RXUSED (0x0000FFFF) + +#define FCT_TX_CTL (0x0094) +#define FCT_TX_CTL_EN (0x80000000) +#define FCT_TX_CTL_RST (0x40000000) +#define FCT_TX_CTL_TX_NOT_EMPTY (0x00400000) +#define FCT_TX_CTL_TX_EMPTY (0x00200000) +#define FCT_TX_CTL_TX_DISABLED (0x00100000) +#define FCT_TX_CTL_TXUSED (0x0000FFFF) + +#define FCT_RX_FIFO_END (0x0098) +#define FCT_RX_FIFO_END_MASK (0x0000007F) + +#define FCT_TX_FIFO_END (0x009C) +#define FCT_TX_FIFO_END_MASK (0x0000003F) + +#define FCT_FLOW (0x00A0) +#define FCT_FLOW_THRESHOLD_OFF (0x00007F00) +#define FCT_FLOW_THRESHOLD_OFF_SHIFT (8) +#define FCT_FLOW_THRESHOLD_ON (0x0000007F) + +/* MAC CSRs */ +#define MAC_CR (0x100) +#define MAC_CR_ADP (0x00002000) +#define MAC_CR_ADD (0x00001000) +#define MAC_CR_ASD (0x00000800) +#define MAC_CR_INT_LOOP (0x00000400) +#define MAC_CR_BOLMT (0x000000C0) +#define MAC_CR_FDPX (0x00000008) +#define MAC_CR_CFG (0x00000006) +#define MAC_CR_CFG_10 (0x00000000) +#define MAC_CR_CFG_100 (0x00000002) +#define MAC_CR_CFG_1000 (0x00000004) +#define MAC_CR_RST (0x00000001) + +#define MAC_RX (0x104) +#define MAC_RX_MAX_SIZE (0x3FFF0000) +#define MAC_RX_MAX_SIZE_SHIFT (16) +#define MAC_RX_FCS_STRIP (0x00000010) +#define MAC_RX_FSE (0x00000004) +#define MAC_RX_RXD (0x00000002) +#define MAC_RX_RXEN (0x00000001) + +#define MAC_TX (0x108) +#define MAC_TX_BFCS (0x00000004) +#define MAC_TX_TXD (0x00000002) +#define MAC_TX_TXEN (0x00000001) + +#define FLOW (0x10C) +#define FLOW_FORCE_FC (0x80000000) +#define FLOW_TX_FCEN (0x40000000) +#define FLOW_RX_FCEN (0x20000000) +#define FLOW_FPF (0x10000000) +#define FLOW_PAUSE_TIME (0x0000FFFF) + +#define RAND_SEED (0x110) +#define RAND_SEED_MASK (0x0000FFFF) + +#define ERR_STS (0x114) +#define ERR_STS_FCS_ERR (0x00000100) +#define ERR_STS_LFRM_ERR (0x00000080) +#define ERR_STS_RUNT_ERR (0x00000040) +#define ERR_STS_COLLISION_ERR (0x00000010) +#define ERR_STS_ALIGN_ERR (0x00000008) +#define ERR_STS_URUN_ERR (0x00000004) + +#define RX_ADDRH (0x118) +#define RX_ADDRH_MASK (0x0000FFFF) + +#define RX_ADDRL (0x11C) + +#define MII_ACCESS (0x120) +#define MII_ACCESS_PHY_ADDR (0x0000F800) +#define MII_ACCESS_PHY_ADDR_SHIFT (11) +#define MII_ACCESS_REG_ADDR (0x000007C0) +#define MII_ACCESS_REG_ADDR_SHIFT (6) +#define MII_ACCESS_READ (0x00000000) +#define MII_ACCESS_WRITE (0x00000002) +#define MII_ACCESS_BUSY (0x00000001) + +#define MII_DATA (0x124) +#define MII_DATA_MASK (0x0000FFFF) + +#define WUCSR (0x140) +#define WUCSR_PFDA_FR (0x00000080) +#define WUCSR_WUFR (0x00000040) +#define WUCSR_MPR (0x00000020) +#define WUCSR_BCAST_FR (0x00000010) +#define WUCSR_PFDA_EN (0x00000008) +#define WUCSR_WUEN (0x00000004) +#define WUCSR_MPEN (0x00000002) +#define WUCSR_BCST_EN (0x00000001) + +#define WUF_CFGX (0x144) +#define WUF_CFGX_EN (0x80000000) +#define WUF_CFGX_ATYPE (0x03000000) +#define WUF_CFGX_ATYPE_UNICAST (0x00000000) +#define WUF_CFGX_ATYPE_MULTICAST (0x02000000) +#define WUF_CFGX_ATYPE_ALL (0x03000000) +#define WUF_CFGX_PATTERN_OFFSET (0x007F0000) +#define WUF_CFGX_PATTERN_OFFSET_SHIFT (16) +#define WUF_CFGX_CRC16 (0x0000FFFF) +#define WUF_NUM (8) + +#define WUF_MASKX (0x170) +#define WUF_MASKX_AVALID (0x80000000) +#define WUF_MASKX_ATYPE (0x40000000) + +#define ADDR_FILTX (0x300) +#define ADDR_FILTX_FB_VALID (0x80000000) +#define ADDR_FILTX_FB_TYPE (0x40000000) +#define ADDR_FILTX_FB_ADDRHI (0x0000FFFF) +#define ADDR_FILTX_SB_ADDRLO (0xFFFFFFFF) + +#define WUCSR2 (0x500) +#define WUCSR2_NS_RCD (0x00000040) +#define WUCSR2_ARP_RCD (0x00000020) +#define WUCSR2_TCPSYN_RCD (0x00000010) +#define WUCSR2_NS_OFFLOAD (0x00000004) +#define WUCSR2_ARP_OFFLOAD (0x00000002) +#define WUCSR2_TCPSYN_OFFLOAD (0x00000001) + +#define WOL_FIFO_STS (0x504) + +#define IPV6_ADDRX (0x510) + +#define IPV4_ADDRX (0x590) + + +/* Vendor-specific PHY Definitions */ + +/* Mode Control/Status Register */ +#define PHY_MODE_CTRL_STS (17) +#define MODE_CTRL_STS_EDPWRDOWN ((u16)0x2000) +#define MODE_CTRL_STS_ENERGYON ((u16)0x0002) + +#define PHY_INT_SRC (29) +#define PHY_INT_SRC_ENERGY_ON ((u16)0x0080) +#define PHY_INT_SRC_ANEG_COMP ((u16)0x0040) +#define PHY_INT_SRC_REMOTE_FAULT ((u16)0x0020) +#define PHY_INT_SRC_LINK_DOWN ((u16)0x0010) + +#define PHY_INT_MASK (30) +#define PHY_INT_MASK_ENERGY_ON ((u16)0x0080) +#define PHY_INT_MASK_ANEG_COMP ((u16)0x0040) +#define PHY_INT_MASK_REMOTE_FAULT ((u16)0x0020) +#define PHY_INT_MASK_LINK_DOWN ((u16)0x0010) +#define PHY_INT_MASK_DEFAULT (PHY_INT_MASK_ANEG_COMP | \ + PHY_INT_MASK_LINK_DOWN) + +#define PHY_SPECIAL (31) +#define PHY_SPECIAL_SPD ((u16)0x001C) +#define PHY_SPECIAL_SPD_10HALF ((u16)0x0004) +#define PHY_SPECIAL_SPD_10FULL ((u16)0x0014) +#define PHY_SPECIAL_SPD_100HALF ((u16)0x0008) +#define PHY_SPECIAL_SPD_100FULL ((u16)0x0018) + +/* USB Vendor Requests */ +#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0 +#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1 +#define USB_VENDOR_REQUEST_GET_STATS 0xA2 + +/* Interrupt Endpoint status word bitfields */ +#define INT_ENP_RDFO_INT ((u32)BIT(22)) +#define INT_ENP_TXE_INT ((u32)BIT(21)) +#define INT_ENP_TX_DIS_INT ((u32)BIT(19)) +#define INT_ENP_RX_DIS_INT ((u32)BIT(18)) +#define INT_ENP_PHY_INT ((u32)BIT(17)) +#define INT_ENP_MAC_ERR_INT ((u32)BIT(15)) +#define INT_ENP_RX_FIFO_DATA_INT ((u32)BIT(12)) + +#endif /* _SMSC75XX_H */