提交 d05cebb9 编写于 作者: D David S. Miller

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
This batch of fixes is intended for 3.6...

Johannes Berg gives us a pair of iwlwifi fixes.  One corrects some
improperly defined ifdefs that lead to crashes and BUG_ONs.  The other
prevents attempts to read SRAM for devices that aren't actually started.

Julia Lawall provides an ipw2100 fix to properly set the return code
from a function call before testing it! :-)

Thomas Huehn corrects the improper use of a constant related to a power
setting in ath5k.

Thomas Pedersen offers a mac80211 fix to properly handle destination
addresses of unicast frames passing though a mesh gate.

Vladimir Zapolskiy provides a brcmsmac fix to properly mark the
interface state when the device goes down.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -1482,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
case AR5K_EEPROM_MODE_11A:
offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version);
rate_pcal_info = ee->ee_rate_tpwr_a;
ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN;
ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN;
break;
case AR5K_EEPROM_MODE_11B:
offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version);
......
......@@ -182,6 +182,7 @@
#define AR5K_EEPROM_EEP_DELTA 10
#define AR5K_EEPROM_N_MODES 3
#define AR5K_EEPROM_N_5GHZ_CHAN 10
#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8
#define AR5K_EEPROM_N_2GHZ_CHAN 3
#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4
#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4
......
......@@ -1233,6 +1233,9 @@ uint brcms_reset(struct brcms_info *wl)
/* dpc will not be rescheduled */
wl->resched = false;
/* inform publicly that interface is down */
wl->pub->up = false;
return 0;
}
......
......@@ -2042,7 +2042,8 @@ static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
return;
}
len = ETH_ALEN;
ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid,
&len);
if (ret) {
IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
__LINE__);
......
......@@ -124,6 +124,9 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
const struct fw_img *img;
size_t bufsz;
if (!iwl_is_ready_rf(priv))
return -EAGAIN;
/* default is to dump the entire data segment */
if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
priv->dbgfs_sram_offset = 0x800000;
......
......@@ -350,7 +350,7 @@ int iwl_queue_space(const struct iwl_queue *q);
/*****************************************************
* Error handling
******************************************************/
int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display);
int iwl_dump_fh(struct iwl_trans *trans, char **buf);
void iwl_dump_csr(struct iwl_trans *trans);
/*****************************************************
......
......@@ -555,7 +555,7 @@ static void iwl_irq_handle_error(struct iwl_trans *trans)
}
iwl_dump_csr(trans);
iwl_dump_fh(trans, NULL, false);
iwl_dump_fh(trans, NULL);
iwl_op_mode_nic_error(trans->op_mode);
}
......
......@@ -1649,13 +1649,9 @@ static const char *get_fh_string(int cmd)
#undef IWL_CMD
}
int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
int iwl_dump_fh(struct iwl_trans *trans, char **buf)
{
int i;
#ifdef CONFIG_IWLWIFI_DEBUG
int pos = 0;
size_t bufsz = 0;
#endif
static const u32 fh_tbl[] = {
FH_RSCSR_CHNL0_STTS_WPTR_REG,
FH_RSCSR_CHNL0_RBDCB_BASE_REG,
......@@ -1667,29 +1663,35 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
FH_TSSR_TX_STATUS_REG,
FH_TSSR_TX_ERROR_REG
};
#ifdef CONFIG_IWLWIFI_DEBUG
if (display) {
bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
#ifdef CONFIG_IWLWIFI_DEBUGFS
if (buf) {
int pos = 0;
size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
*buf = kmalloc(bufsz, GFP_KERNEL);
if (!*buf)
return -ENOMEM;
pos += scnprintf(*buf + pos, bufsz - pos,
"FH register values:\n");
for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
for (i = 0; i < ARRAY_SIZE(fh_tbl); i++)
pos += scnprintf(*buf + pos, bufsz - pos,
" %34s: 0X%08x\n",
get_fh_string(fh_tbl[i]),
iwl_read_direct32(trans, fh_tbl[i]));
}
return pos;
}
#endif
IWL_ERR(trans, "FH register values:\n");
for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
for (i = 0; i < ARRAY_SIZE(fh_tbl); i++)
IWL_ERR(trans, " %34s: 0X%08x\n",
get_fh_string(fh_tbl[i]),
iwl_read_direct32(trans, fh_tbl[i]));
}
return 0;
}
......@@ -1982,11 +1984,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file,
size_t count, loff_t *ppos)
{
struct iwl_trans *trans = file->private_data;
char *buf;
char *buf = NULL;
int pos = 0;
ssize_t ret = -EFAULT;
ret = pos = iwl_dump_fh(trans, &buf, true);
ret = pos = iwl_dump_fh(trans, &buf);
if (buf) {
ret = simple_read_from_buffer(user_buf,
count, ppos, buf, pos);
......
......@@ -1811,37 +1811,31 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
sdata, NULL, NULL);
} else {
int is_mesh_mcast = 1;
const u8 *mesh_da;
if (is_multicast_ether_addr(skb->data))
/* DA TA mSA AE:SA */
mesh_da = skb->data;
else {
static const u8 bcast[ETH_ALEN] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
if (mppath) {
/* RA TA mDA mSA AE:DA SA */
/* DS -> MBSS (802.11-2012 13.11.3.3).
* For unicast with unknown forwarding information,
* destination might be in the MBSS or if that fails
* forwarded to another mesh gate. In either case
* resolution will be handled in ieee80211_xmit(), so
* leave the original DA. This also works for mcast */
const u8 *mesh_da = skb->data;
if (mppath)
mesh_da = mppath->mpp;
is_mesh_mcast = 0;
} else if (mpath) {
else if (mpath)
mesh_da = mpath->dst;
is_mesh_mcast = 0;
} else {
/* DA TA mSA AE:SA */
mesh_da = bcast;
}
}
rcu_read_unlock();
hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc,
mesh_da, sdata->vif.addr);
rcu_read_unlock();
if (is_mesh_mcast)
if (is_multicast_ether_addr(mesh_da))
/* DA TA mSA AE:SA */
meshhdrlen =
ieee80211_new_mesh_header(&mesh_hdr,
sdata,
skb->data + ETH_ALEN,
NULL);
else
/* RA TA mDA mSA AE:DA SA */
meshhdrlen =
ieee80211_new_mesh_header(&mesh_hdr,
sdata,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册