[SCSI] qla2xxx: Add an "is reset active" helper.

Many locations within the driver would use an inconsistent set of
checks to determine ISP-reset state.  Consolidate the checks into
this inline-helper.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_attr.c

@@ -1036,8 +1036,7 @@ qla2x00_link_state_show(struct device *dev, struct device_attribute *attr,
 	    vha->device_flags & DFLG_NO_CABLE)
 		len = snprintf(buf, PAGE_SIZE, "Link Down\n");
 	else if (atomic_read(&vha->loop_state) != LOOP_READY ||
-	    test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-	    test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+	    qla2x00_reset_active(vha))
 		len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n");
 	else {
 		len = snprintf(buf, PAGE_SIZE, "Link Up - ");
@@ -1359,8 +1358,7 @@ qla2x00_thermal_temp_show(struct device *dev,
 		return snprintf(buf, PAGE_SIZE, "\n");
 
 	temp = frac = 0;
-	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-	    test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+	if (qla2x00_reset_active(vha))
 		ql_log(ql_log_warn, vha, 0x707b,
 		    "ISP reset active.\n");
 	else if (!vha->hw->flags.eeh_busy)
@@ -1379,8 +1377,7 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
 	int rval = QLA_FUNCTION_FAILED;
 	uint16_t state[5];
 
-	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+	if (qla2x00_reset_active(vha))
 		ql_log(ql_log_warn, vha, 0x707c,
 		    "ISP reset active.\n");
 	else if (!vha->hw->flags.eeh_busy)
@@ -1693,9 +1690,7 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
 	if (IS_FWI2_CAPABLE(ha)) {
 		rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma);
 	} else if (atomic_read(&base_vha->loop_state) == LOOP_READY &&
-		    !test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) &&
-		    !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
-		    !ha->dpc_active) {
+	    !qla2x00_reset_active(vha) && !ha->dpc_active) {
 		/* Must be in a 'READY' state for statistics retrieval. */
 		rval = qla2x00_get_link_status(base_vha, base_vha->loop_id,
 						stats, stats_dma);

drivers/scsi/qla2xxx/qla_bsg.c

@@ -108,13 +108,6 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
 		goto exit_fcp_prio_cfg;
 	}
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ret = -EBUSY;
-		goto exit_fcp_prio_cfg;
-	}
-
 	/* Get the sub command */
 	oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
 
@@ -646,13 +639,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 	dma_addr_t rsp_data_dma;
 	uint32_t rsp_data_len;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x7018, "Abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!vha->flags.online) {
 		ql_log(ql_log_warn, vha, 0x7019, "Host is not online.\n");
 		return -EIO;
@@ -874,13 +860,6 @@ qla84xx_reset(struct fc_bsg_job *bsg_job)
 	int rval = 0;
 	uint32_t flag;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-	    test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-	    test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x702e, "Abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!IS_QLA84XX(ha)) {
 		ql_dbg(ql_dbg_user, vha, 0x702f, "Not 84xx, exiting.\n");
 		return -EINVAL;
@@ -922,11 +901,6 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job)
 	uint32_t flag;
 	uint32_t fw_ver;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))
-		return -EBUSY;
-
 	if (!IS_QLA84XX(ha)) {
 		ql_dbg(ql_dbg_user, vha, 0x7032,
 		    "Not 84xx, exiting.\n");
@@ -1036,14 +1010,6 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job)
 	uint32_t data_len = 0;
 	uint32_t dma_direction = DMA_NONE;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x7039,
-		    "Abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!IS_QLA84XX(ha)) {
 		ql_log(ql_log_warn, vha, 0x703a,
 		    "Not 84xx, exiting.\n");
@@ -1246,13 +1212,6 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job)
 
 	bsg_job->reply->reply_payload_rcv_len = 0;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x7045, "abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!IS_IIDMA_CAPABLE(vha->hw)) {
 		ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n");
 		return -EINVAL;
@@ -1668,6 +1627,15 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job)
 		vha = shost_priv(host);
 	}
 
+	if (qla2x00_reset_active(vha)) {
+		ql_dbg(ql_dbg_user, vha, 0x709f,
+		    "BSG: ISP abort active/needed -- cmd=%d.\n",
+		    bsg_job->request->msgcode);
+		bsg_job->reply->result = (DID_ERROR << 16);
+		bsg_job->job_done(bsg_job);
+		return -EBUSY;
+	}
+
 	ql_dbg(ql_dbg_user, vha, 0x7000,
 	    "Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode);
 

drivers/scsi/qla2xxx/qla_dbg.c

@@ -19,7 +19,8 @@
  * | DPC Thread                   |       0x401c       |		|
  * | Async Events                 |       0x5057       | 0x5052		|
  * | Timer Routines               |       0x6011       | 0x600e,0x600f  |
- * | User Space Interactions      |       0x709e       |		|
+ * | User Space Interactions      |       0x709e       | 0x7018,0x702e  |
+ * |                              |                    | 0x7039,0x7045  |
  * | Task Management              |       0x803c       | 0x8025-0x8026  |
  * |                              |                    | 0x800b,0x8039  |
  * | AER/EEH                      |       0x900f       |		|

drivers/scsi/qla2xxx/qla_inline.h

@@ -131,3 +131,16 @@ qla2x00_hba_err_chk_enabled(srb_t *sp)
 	}
 	return 0;
 }
+
+static inline int
+qla2x00_reset_active(scsi_qla_host_t *vha)
+{
+	scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
+
+	/* Test appropriate base-vha and vha flags. */
+	return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
+	    test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
+	    test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
+	    test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
+	    test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
+}