提交 cd883a79 编写于 作者: J Jon Mason 提交者: David S. Miller

vxge: always enable hardware time stamp

Hardware time stamp calculation can only be enabled by the privileged
function. Enable it always by default and simply use the ethtool
interface to set a flag to indicate whether or not the respective
function driver should indicate the timestamp along with the received
packet.

Also, make certain fields in vxge_hw_device_config bit-fields to reduce
the size of the struct.
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d83d282b
......@@ -412,6 +412,11 @@ struct vxge_hw_vp_config {
* See also: struct vxge_hw_tim_intr_config{}.
*/
struct vxge_hw_device_config {
u32 device_poll_millis;
#define VXGE_HW_MIN_DEVICE_POLL_MILLIS 1
#define VXGE_HW_MAX_DEVICE_POLL_MILLIS 100000
#define VXGE_HW_DEF_DEVICE_POLL_MILLIS 1000
u32 dma_blockpool_initial;
u32 dma_blockpool_max;
#define VXGE_HW_MIN_DMA_BLOCK_POOL_SIZE 0
......@@ -421,35 +426,34 @@ struct vxge_hw_device_config {
#define VXGE_HW_MAX_PAYLOAD_SIZE_512 2
u32 intr_mode;
u32 intr_mode:2,
#define VXGE_HW_INTR_MODE_IRQLINE 0
#define VXGE_HW_INTR_MODE_MSIX 1
#define VXGE_HW_INTR_MODE_MSIX_ONE_SHOT 2
#define VXGE_HW_INTR_MODE_DEF 0
u32 rth_en;
rth_en:1,
#define VXGE_HW_RTH_DISABLE 0
#define VXGE_HW_RTH_ENABLE 1
#define VXGE_HW_RTH_DEFAULT 0
u32 rth_it_type;
rth_it_type:1,
#define VXGE_HW_RTH_IT_TYPE_SOLO_IT 0
#define VXGE_HW_RTH_IT_TYPE_MULTI_IT 1
#define VXGE_HW_RTH_IT_TYPE_DEFAULT 0
u32 rts_mac_en;
rts_mac_en:1,
#define VXGE_HW_RTS_MAC_DISABLE 0
#define VXGE_HW_RTS_MAC_ENABLE 1
#define VXGE_HW_RTS_MAC_DEFAULT 0
struct vxge_hw_vp_config vp_config[VXGE_HW_MAX_VIRTUAL_PATHS];
u32 device_poll_millis;
#define VXGE_HW_MIN_DEVICE_POLL_MILLIS 1
#define VXGE_HW_MAX_DEVICE_POLL_MILLIS 100000
#define VXGE_HW_DEF_DEVICE_POLL_MILLIS 1000
hwts_en:1;
#define VXGE_HW_HWTS_DISABLE 0
#define VXGE_HW_HWTS_ENABLE 1
#define VXGE_HW_HWTS_DEFAULT 1
struct vxge_hw_vp_config vp_config[VXGE_HW_MAX_VIRTUAL_PATHS];
};
/**
......
......@@ -3112,8 +3112,7 @@ vxge_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *net_stats)
return net_stats;
}
static enum vxge_hw_status vxge_timestamp_config(struct vxgedev *vdev,
int enable)
static enum vxge_hw_status vxge_timestamp_config(struct __vxge_hw_device *devh)
{
enum vxge_hw_status status;
u64 val64;
......@@ -3123,27 +3122,24 @@ static enum vxge_hw_status vxge_timestamp_config(struct vxgedev *vdev,
* required for the driver to load (due to a hardware bug),
* there is no need to do anything special here.
*/
if (enable)
val64 = VXGE_HW_XMAC_TIMESTAMP_EN |
VXGE_HW_XMAC_TIMESTAMP_USE_LINK_ID(0) |
VXGE_HW_XMAC_TIMESTAMP_INTERVAL(0);
else
val64 = 0;
status = vxge_hw_mgmt_reg_write(vdev->devh,
status = vxge_hw_mgmt_reg_write(devh,
vxge_hw_mgmt_reg_type_mrpcim,
0,
offsetof(struct vxge_hw_mrpcim_reg,
xmac_timestamp),
val64);
vxge_hw_device_flush_io(vdev->devh);
vxge_hw_device_flush_io(devh);
devh->config.hwts_en = VXGE_HW_HWTS_ENABLE;
return status;
}
static int vxge_hwtstamp_ioctl(struct vxgedev *vdev, void __user *data)
{
struct hwtstamp_config config;
enum vxge_hw_status status;
int i;
if (copy_from_user(&config, data, sizeof(config)))
......@@ -3164,10 +3160,6 @@ static int vxge_hwtstamp_ioctl(struct vxgedev *vdev, void __user *data)
switch (config.rx_filter) {
case HWTSTAMP_FILTER_NONE:
status = vxge_timestamp_config(vdev, 0);
if (status != VXGE_HW_OK)
return -EFAULT;
vdev->rx_hwts = 0;
config.rx_filter = HWTSTAMP_FILTER_NONE;
break;
......@@ -3186,8 +3178,7 @@ static int vxge_hwtstamp_ioctl(struct vxgedev *vdev, void __user *data)
case HWTSTAMP_FILTER_PTP_V2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
status = vxge_timestamp_config(vdev, 1);
if (status != VXGE_HW_OK)
if (vdev->devh->config.hwts_en != VXGE_HW_HWTS_ENABLE)
return -EFAULT;
vdev->rx_hwts = 1;
......@@ -4575,6 +4566,24 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
goto _exit4;
}
/* Always enable HWTS. This will always cause the FCS to be invalid,
* due to the fact that HWTS is using the FCS as the location of the
* timestamp. The HW FCS checking will still correctly determine if
* there is a valid checksum, and the FCS is being removed by the driver
* anyway. So no fucntionality is being lost. Since it is always
* enabled, we now simply use the ioctl call to set whether or not the
* driver should be paying attention to the HWTS.
*/
if (is_privileged == VXGE_HW_OK) {
status = vxge_timestamp_config(hldev);
if (status != VXGE_HW_OK) {
vxge_debug_init(VXGE_ERR, "%s: HWTS enable failed",
VXGE_DRIVER_NAME);
ret = -EFAULT;
goto _exit4;
}
}
vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
/* set private device info */
......
......@@ -240,7 +240,7 @@ struct vxge_hw_tim_intr_config {
u32 btimer_val;
#define VXGE_HW_MIN_TIM_BTIMER_VAL 0
#define VXGE_HW_MAX_TIM_BTIMER_VAL 67108864
#define VXGE_HW_USE_FLASH_DEFAULT 0xffffffff
#define VXGE_HW_USE_FLASH_DEFAULT (~0)
u32 timer_ac_en;
#define VXGE_HW_TIM_TIMER_AC_ENABLE 1
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册