diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 78ba0fc3548aa0ed4a205756994c5fe05706cc71..45f8f68caf4a18663dfb97ea9fd4b680da33f109 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -5,7 +5,6 @@ isci-objs := init.o phy.o request.o sata.o \ host.o task.o probe_roms.o \ remote_node_context.o \ remote_node_table.o \ - core/scic_sds_controller.o \ core/scic_sds_request.o \ core/scic_sds_stp_request.o \ core/scic_sds_port.o \ diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c index 0101fec238659ccae9cfd6da1779821d54d1a237..595d8da1abba3cc271c943800d9f3ddda5a65e1c 100644 --- a/drivers/scsi/isci/core/sci_util.c +++ b/drivers/scsi/isci/core/sci_util.c @@ -55,7 +55,6 @@ #include #include "sci_util.h" -#include "sci_environment.h" #include "request.h" void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr) diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index 8b8c9259f52f856d32e355b96f3a9d8971475fba..15e7744dbdcffaf68dcdfa46920a42a064339eba 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -229,44 +229,6 @@ union scic_oem_parameters { struct scic_sds_oem_params sds1; }; -/** - * scic_user_parameters_set() - This method allows the user to attempt to - * change the user parameters utilized by the controller. - * @controller: This parameter specifies the controller on which to set the - * user parameters. - * @user_parameters: This parameter specifies the USER_PARAMETERS object - * containing the potential new values. - * - * Indicate if the update of the user parameters was successful. SCI_SUCCESS - * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE - * This value is returned if the attempt to change the user parameter failed, - * because changing one of the parameters is not currently allowed. - * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user - * supplied an invalid interrupt coalescence time, spin up delay interval, etc. - */ -enum sci_status scic_user_parameters_set( - struct scic_sds_controller *controller, - union scic_user_parameters *user_parameters); - -/** - * scic_oem_parameters_set() - This method allows the user to attempt to change - * the OEM parameters utilized by the controller. - * @controller: This parameter specifies the controller on which to set the - * user parameters. - * @oem_parameters: This parameter specifies the OEM parameters object - * containing the potential new values. - * - * Indicate if the update of the user parameters was successful. SCI_SUCCESS - * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE - * This value is returned if the attempt to change the user parameter failed, - * because changing one of the parameters is not currently allowed. - * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user - * supplied an unsupported value for one of the OEM parameters. - */ -enum sci_status scic_oem_parameters_set( - struct scic_sds_controller *controller, - union scic_oem_parameters *oem_parameters); - int scic_oem_parameters_validate(struct scic_sds_oem_params *oem); /** diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h deleted file mode 100644 index bd08f306ed6714a9456a66a0f5e3e3c304399f8d..0000000000000000000000000000000000000000 --- a/drivers/scsi/isci/core/scic_controller.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_CONTROLLER_H_ -#define _SCIC_CONTROLLER_H_ - -#include "scic_config_parameters.h" - -struct scic_sds_request; -struct scic_sds_phy; -struct scic_sds_port; -struct scic_sds_remote_device; - -enum sci_status scic_controller_construct(struct scic_sds_controller *c, - void __iomem *scu_base, - void __iomem *smu_base); - -void scic_controller_enable_interrupts( - struct scic_sds_controller *controller); - -void scic_controller_disable_interrupts( - struct scic_sds_controller *controller); - -enum sci_status scic_controller_initialize( - struct scic_sds_controller *controller); - -u32 scic_controller_get_suggested_start_timeout( - struct scic_sds_controller *controller); - -enum sci_status scic_controller_start( - struct scic_sds_controller *controller, - u32 timeout); - -enum sci_status scic_controller_stop( - struct scic_sds_controller *controller, - u32 timeout); - -enum sci_status scic_controller_reset( - struct scic_sds_controller *controller); - -enum sci_status scic_controller_start_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request, - u16 io_tag); - -enum sci_task_status scic_controller_start_task( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *task_request, - u16 io_tag); - -enum sci_status scic_controller_terminate_request( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *request); - -enum sci_status scic_controller_complete_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request); - -enum sci_status scic_controller_get_phy_handle( - struct scic_sds_controller *controller, - u8 phy_index, - struct scic_sds_phy **phy_handle); - -u16 scic_controller_allocate_io_tag( - struct scic_sds_controller *controller); - -enum sci_status scic_controller_free_io_tag( - struct scic_sds_controller *controller, - u16 io_tag); - -struct device; -struct scic_sds_controller *scic_controller_alloc(struct device *dev); -int scic_controller_mem_init(struct scic_sds_controller *scic); -#endif /* _SCIC_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c deleted file mode 100644 index e77265b9b9ec9d1d68c34a005db6d972fd903f7c..0000000000000000000000000000000000000000 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ /dev/null @@ -1,2973 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include -#include "scic_controller.h" -#include "scic_phy.h" -#include "scic_port.h" -#include "scic_sds_controller.h" -#include "scu_registers.h" -#include "scic_sds_phy.h" -#include "scic_sds_port_configuration_agent.h" -#include "scic_sds_port.h" -#include "remote_device.h" -#include "scic_sds_request.h" -#include "sci_environment.h" -#include "sci_util.h" -#include "scu_completion_codes.h" -#include "scu_event_codes.h" -#include "scu_remote_node_context.h" -#include "scu_task_context.h" -#include "scu_unsolicited_frame.h" -#include "timers.h" - -#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 - -/** - * smu_dcc_get_max_ports() - - * - * This macro returns the maximum number of logical ports supported by the - * hardware. The caller passes in the value read from the device context - * capacity register and this macro will mash and shift the value appropriately. - */ -#define smu_dcc_get_max_ports(dcc_value) \ - (\ - (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \ - ) - -/** - * smu_dcc_get_max_task_context() - - * - * This macro returns the maximum number of task contexts supported by the - * hardware. The caller passes in the value read from the device context - * capacity register and this macro will mash and shift the value appropriately. - */ -#define smu_dcc_get_max_task_context(dcc_value) \ - (\ - (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \ - ) - -/** - * smu_dcc_get_max_remote_node_context() - - * - * This macro returns the maximum number of remote node contexts supported by - * the hardware. The caller passes in the value read from the device context - * capacity register and this macro will mash and shift the value appropriately. - */ -#define smu_dcc_get_max_remote_node_context(dcc_value) \ - (\ - (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \ - ) - - -static void scic_sds_controller_power_control_timer_handler( - void *controller); -#define SCIC_SDS_CONTROLLER_MIN_TIMER_COUNT 3 -#define SCIC_SDS_CONTROLLER_MAX_TIMER_COUNT 3 - -/** - * - * - * The number of milliseconds to wait for a phy to start. - */ -#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100 - -/** - * - * - * The number of milliseconds to wait while a given phy is consuming power - * before allowing another set of phys to consume power. Ultimately, this will - * be specified by OEM parameter. - */ -#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500 - -/** - * COMPLETION_QUEUE_CYCLE_BIT() - - * - * This macro will return the cycle bit of the completion queue entry - */ -#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000) - -/** - * NORMALIZE_GET_POINTER() - - * - * This macro will normalize the completion queue get pointer so its value can - * be used as an index into an array - */ -#define NORMALIZE_GET_POINTER(x) \ - ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK) - -/** - * NORMALIZE_PUT_POINTER() - - * - * This macro will normalize the completion queue put pointer so its value can - * be used as an array inde - */ -#define NORMALIZE_PUT_POINTER(x) \ - ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK) - - -/** - * NORMALIZE_GET_POINTER_CYCLE_BIT() - - * - * This macro will normalize the completion queue cycle pointer so it matches - * the completion queue cycle bit - */ -#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \ - ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT)) - -/** - * NORMALIZE_EVENT_POINTER() - - * - * This macro will normalize the completion queue event entry so its value can - * be used as an index. - */ -#define NORMALIZE_EVENT_POINTER(x) \ - (\ - ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \ - >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \ - ) - -/** - * INCREMENT_COMPLETION_QUEUE_GET() - - * - * This macro will increment the controllers completion queue index value and - * possibly toggle the cycle bit if the completion queue index wraps back to 0. - */ -#define INCREMENT_COMPLETION_QUEUE_GET(controller, index, cycle) \ - INCREMENT_QUEUE_GET(\ - (index), \ - (cycle), \ - (controller)->completion_queue_entries, \ - SMU_CQGR_CYCLE_BIT \ - ) - -/** - * INCREMENT_EVENT_QUEUE_GET() - - * - * This macro will increment the controllers event queue index value and - * possibly toggle the event cycle bit if the event queue index wraps back to 0. - */ -#define INCREMENT_EVENT_QUEUE_GET(controller, index, cycle) \ - INCREMENT_QUEUE_GET(\ - (index), \ - (cycle), \ - (controller)->completion_event_entries, \ - SMU_CQGR_EVENT_CYCLE_BIT \ - ) - -static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - scic->power_control.timer = isci_timer_create(ihost, - scic, - scic_sds_controller_power_control_timer_handler); - - memset(scic->power_control.requesters, 0, - sizeof(scic->power_control.requesters)); - - scic->power_control.phys_waiting = 0; - scic->power_control.phys_granted_power = 0; -} - -int scic_controller_mem_init(struct scic_sds_controller *scic) -{ - struct device *dev = scic_to_dev(scic); - dma_addr_t dma_handle; - enum sci_status result; - - scic->completion_queue = dmam_alloc_coherent(dev, - scic->completion_queue_entries * sizeof(u32), - &dma_handle, GFP_KERNEL); - if (!scic->completion_queue) - return -ENOMEM; - - writel(lower_32_bits(dma_handle), - &scic->smu_registers->completion_queue_lower); - writel(upper_32_bits(dma_handle), - &scic->smu_registers->completion_queue_upper); - - scic->remote_node_context_table = dmam_alloc_coherent(dev, - scic->remote_node_entries * - sizeof(union scu_remote_node_context), - &dma_handle, GFP_KERNEL); - if (!scic->remote_node_context_table) - return -ENOMEM; - - writel(lower_32_bits(dma_handle), - &scic->smu_registers->remote_node_context_lower); - writel(upper_32_bits(dma_handle), - &scic->smu_registers->remote_node_context_upper); - - scic->task_context_table = dmam_alloc_coherent(dev, - scic->task_context_entries * - sizeof(struct scu_task_context), - &dma_handle, GFP_KERNEL); - if (!scic->task_context_table) - return -ENOMEM; - - writel(lower_32_bits(dma_handle), - &scic->smu_registers->host_task_table_lower); - writel(upper_32_bits(dma_handle), - &scic->smu_registers->host_task_table_upper); - - result = scic_sds_unsolicited_frame_control_construct(scic); - if (result) - return result; - - /* - * Inform the silicon as to the location of the UF headers and - * address table. - */ - writel(lower_32_bits(scic->uf_control.headers.physical_address), - &scic->scu_registers->sdma.uf_header_base_address_lower); - writel(upper_32_bits(scic->uf_control.headers.physical_address), - &scic->scu_registers->sdma.uf_header_base_address_upper); - - writel(lower_32_bits(scic->uf_control.address_table.physical_address), - &scic->scu_registers->sdma.uf_address_table_lower); - writel(upper_32_bits(scic->uf_control.address_table.physical_address), - &scic->scu_registers->sdma.uf_address_table_upper); - - return 0; -} - -/** - * This method initializes the task context data for the controller. - * @scic: - * - */ -static void -scic_sds_controller_assign_task_entries(struct scic_sds_controller *controller) -{ - u32 task_assignment; - - /* - * Assign all the TCs to function 0 - * TODO: Do we actually need to read this register to write it back? - */ - - task_assignment = - readl(&controller->smu_registers->task_context_assignment[0]); - - task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) | - (SMU_TCA_GEN_VAL(ENDING, controller->task_context_entries - 1)) | - (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)); - - writel(task_assignment, - &controller->smu_registers->task_context_assignment[0]); - -} - -/** - * This method initializes the hardware completion queue. - * - * - */ -static void scic_sds_controller_initialize_completion_queue( - struct scic_sds_controller *scic) -{ - u32 index; - u32 completion_queue_control_value; - u32 completion_queue_get_value; - u32 completion_queue_put_value; - - scic->completion_queue_get = 0; - - completion_queue_control_value = ( - SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1) - | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1) - ); - - writel(completion_queue_control_value, - &scic->smu_registers->completion_queue_control); - - - /* Set the completion queue get pointer and enable the queue */ - completion_queue_get_value = ( - (SMU_CQGR_GEN_VAL(POINTER, 0)) - | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0)) - | (SMU_CQGR_GEN_BIT(ENABLE)) - | (SMU_CQGR_GEN_BIT(EVENT_ENABLE)) - ); - - writel(completion_queue_get_value, - &scic->smu_registers->completion_queue_get); - - /* Set the completion queue put pointer */ - completion_queue_put_value = ( - (SMU_CQPR_GEN_VAL(POINTER, 0)) - | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0)) - ); - - writel(completion_queue_put_value, - &scic->smu_registers->completion_queue_put); - - /* Initialize the cycle bit of the completion queue entries */ - for (index = 0; index < scic->completion_queue_entries; index++) { - /* - * If get.cycle_bit != completion_queue.cycle_bit - * its not a valid completion queue entry - * so at system start all entries are invalid */ - scic->completion_queue[index] = 0x80000000; - } -} - -/** - * This method initializes the hardware unsolicited frame queue. - * - * - */ -static void scic_sds_controller_initialize_unsolicited_frame_queue( - struct scic_sds_controller *scic) -{ - u32 frame_queue_control_value; - u32 frame_queue_get_value; - u32 frame_queue_put_value; - - /* Write the queue size */ - frame_queue_control_value = - SCU_UFQC_GEN_VAL(QUEUE_SIZE, - scic->uf_control.address_table.count); - - writel(frame_queue_control_value, - &scic->scu_registers->sdma.unsolicited_frame_queue_control); - - /* Setup the get pointer for the unsolicited frame queue */ - frame_queue_get_value = ( - SCU_UFQGP_GEN_VAL(POINTER, 0) - | SCU_UFQGP_GEN_BIT(ENABLE_BIT) - ); - - writel(frame_queue_get_value, - &scic->scu_registers->sdma.unsolicited_frame_get_pointer); - /* Setup the put pointer for the unsolicited frame queue */ - frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); - writel(frame_queue_put_value, - &scic->scu_registers->sdma.unsolicited_frame_put_pointer); -} - -/** - * This method enables the hardware port task scheduler. - * - * - */ -static void scic_sds_controller_enable_port_task_scheduler( - struct scic_sds_controller *scic) -{ - u32 port_task_scheduler_value; - - port_task_scheduler_value = - readl(&scic->scu_registers->peg0.ptsg.control); - port_task_scheduler_value |= - (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | - SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); - writel(port_task_scheduler_value, - &scic->scu_registers->peg0.ptsg.control); -} - -/** - * - * - * This macro is used to delay between writes to the AFE registers during AFE - * initialization. - */ -#define AFE_REGISTER_WRITE_DELAY 10 - -/* Initialize the AFE for this phy index. We need to read the AFE setup from - * the OEM parameters none - */ -static void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) -{ - const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; - u32 afe_status; - u32 phy_id; - - /* Clear DFX Status registers */ - writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - - if (is_b0()) { - /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement - * Timer, PM Stagger Timer */ - writel(0x0007BFFF, &scic->scu_registers->afe.afe_pmsn_master_control2); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - /* Configure bias currents to normal */ - if (is_a0()) - writel(0x00005500, &scic->scu_registers->afe.afe_bias_control); - else if (is_a2()) - writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control); - else if (is_b0()) - writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control); - - udelay(AFE_REGISTER_WRITE_DELAY); - - /* Enable PLL */ - if (is_b0()) - writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0); - else - writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0); - - udelay(AFE_REGISTER_WRITE_DELAY); - - /* Wait for the PLL to lock */ - do { - afe_status = readl(&scic->scu_registers->afe.afe_common_block_status); - udelay(AFE_REGISTER_WRITE_DELAY); - } while ((afe_status & 0x00001000) == 0); - - if (is_a0() || is_a2()) { - /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ - writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { - const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; - - if (is_b0()) { - /* Configure transmitter SSC parameters */ - writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); - udelay(AFE_REGISTER_WRITE_DELAY); - } else { - /* - * All defaults, except the Receive Word Alignament/Comma Detect - * Enable....(0xe800) */ - writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - if (is_a0()) - writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - else if (is_a2()) - writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - else { - /* Power down TX and RX (PWRDNTX and PWRDNRX) */ - writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - udelay(AFE_REGISTER_WRITE_DELAY); - - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - } - udelay(AFE_REGISTER_WRITE_DELAY); - - if (is_a0() || is_a2()) { - /* Enable TX equalization (0xe824) */ - writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - /* - * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), - * RDD=0x0(RX Detect Enabled) ....(0xe800) */ - writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - - /* Leave DFE/FFE on */ - if (is_a0()) - writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); - else if (is_a2()) - writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); - else { - writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - /* Enable TX equalization (0xe824) */ - writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); - } - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(oem_phy->afe_tx_amp_control0, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(oem_phy->afe_tx_amp_control1, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(oem_phy->afe_tx_amp_control2, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(oem_phy->afe_tx_amp_control3, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - /* Transfer control to the PEs */ - writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0); - udelay(AFE_REGISTER_WRITE_DELAY); -} - -/* - * ****************************************************************************- - * * SCIC SDS Controller Internal Start/Stop Routines - * ****************************************************************************- */ - - -/** - * This method will attempt to transition into the ready state for the - * controller and indicate that the controller start operation has completed - * if all criteria are met. - * @scic: This parameter indicates the controller object for which - * to transition to ready. - * @status: This parameter indicates the status value to be pass into the call - * to scic_cb_controller_start_complete(). - * - * none. - */ -static void scic_sds_controller_transition_to_ready( - struct scic_sds_controller *scic, - enum sci_status status) -{ - struct isci_host *ihost = scic_to_ihost(scic); - - if (scic->state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_STARTING) { - /* - * We move into the ready state, because some of the phys/ports - * may be up and operational. - */ - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_READY); - - isci_host_start_complete(ihost, status); - } -} - -static void scic_sds_controller_timeout_handler(void *_scic) -{ - struct scic_sds_controller *scic = _scic; - struct isci_host *ihost = scic_to_ihost(scic); - struct sci_base_state_machine *sm = &scic->state_machine; - - if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) - scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); - else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) { - sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED); - isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); - } else /* / @todo Now what do we want to do in this case? */ - dev_err(scic_to_dev(scic), - "%s: Controller timer fired when controller was not " - "in a state being timed.\n", - __func__); -} - -static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) -{ - u32 index; - enum sci_status port_status; - enum sci_status status = SCI_SUCCESS; - struct isci_host *ihost = scic_to_ihost(scic); - - for (index = 0; index < scic->logical_port_entries; index++) { - struct scic_sds_port *sci_port = &ihost->ports[index].sci; - scic_sds_port_handler_t stop; - - stop = sci_port->state_handlers->stop_handler; - port_status = stop(sci_port); - - if ((port_status != SCI_SUCCESS) && - (port_status != SCI_FAILURE_INVALID_STATE)) { - status = SCI_FAILURE; - - dev_warn(scic_to_dev(scic), - "%s: Controller stop operation failed to " - "stop port %d because of status %d.\n", - __func__, - sci_port->logical_port_index, - port_status); - } - } - - return status; -} - -static inline void scic_sds_controller_phy_timer_start( - struct scic_sds_controller *scic) -{ - isci_timer_start(scic->phy_startup_timer, - SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); - - scic->phy_startup_timer_pending = true; -} - -static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic) -{ - isci_timer_stop(scic->phy_startup_timer); - - scic->phy_startup_timer_pending = false; -} - -/** - * scic_sds_controller_start_next_phy - start phy - * @scic: controller - * - * If all the phys have been started, then attempt to transition the - * controller to the READY state and inform the user - * (scic_cb_controller_start_complete()). - */ -static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; - struct scic_sds_phy *sci_phy; - enum sci_status status; - - status = SCI_SUCCESS; - - if (scic->phy_startup_timer_pending) - return status; - - if (scic->next_phy_to_start >= SCI_MAX_PHYS) { - bool is_controller_start_complete = true; - u32 state; - u8 index; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - sci_phy = &ihost->phys[index].sci; - state = sci_phy->state_machine.current_state_id; - - if (!scic_sds_phy_get_port(sci_phy)) - continue; - - /* The controller start operation is complete iff: - * - all links have been given an opportunity to start - * - have no indication of a connected device - * - have an indication of a connected device and it has - * finished the link training process. - */ - if ((sci_phy->is_in_link_training == false && - state == SCI_BASE_PHY_STATE_INITIAL) || - (sci_phy->is_in_link_training == false && - state == SCI_BASE_PHY_STATE_STOPPED) || - (sci_phy->is_in_link_training == true && - state == SCI_BASE_PHY_STATE_STARTING)) { - is_controller_start_complete = false; - break; - } - } - - /* - * The controller has successfully finished the start process. - * Inform the SCI Core user and transition to the READY state. */ - if (is_controller_start_complete == true) { - scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS); - scic_sds_controller_phy_timer_stop(scic); - } - } else { - sci_phy = &ihost->phys[scic->next_phy_to_start].sci; - - if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - if (scic_sds_phy_get_port(sci_phy) == NULL) { - scic->next_phy_to_start++; - - /* Caution recursion ahead be forwarned - * - * The PHY was never added to a PORT in MPC mode - * so start the next phy in sequence This phy - * will never go link up and will not draw power - * the OEM parameters either configured the phy - * incorrectly for the PORT or it was never - * assigned to a PORT - */ - return scic_sds_controller_start_next_phy(scic); - } - } - - status = scic_sds_phy_start(sci_phy); - - if (status == SCI_SUCCESS) { - scic_sds_controller_phy_timer_start(scic); - } else { - dev_warn(scic_to_dev(scic), - "%s: Controller stop operation failed " - "to stop phy %d because of status " - "%d.\n", - __func__, - ihost->phys[scic->next_phy_to_start].sci.phy_index, - status); - } - - scic->next_phy_to_start++; - } - - return status; -} - -static void scic_sds_controller_phy_startup_timeout_handler(void *_scic) -{ - struct scic_sds_controller *scic = _scic; - enum sci_status status; - - scic->phy_startup_timer_pending = false; - status = SCI_FAILURE; - while (status != SCI_SUCCESS) - status = scic_sds_controller_start_next_phy(scic); -} - -static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - - scic->phy_startup_timer = isci_timer_create(ihost, - scic, - scic_sds_controller_phy_startup_timeout_handler); - - if (scic->phy_startup_timer == NULL) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - else { - scic->next_phy_to_start = 0; - scic->phy_startup_timer_pending = false; - } - - return SCI_SUCCESS; -} - -static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller *scic) -{ - u32 index; - enum sci_status status; - enum sci_status phy_status; - struct isci_host *ihost = scic_to_ihost(scic); - - status = SCI_SUCCESS; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - phy_status = scic_sds_phy_stop(&ihost->phys[index].sci); - - if (phy_status != SCI_SUCCESS && - phy_status != SCI_FAILURE_INVALID_STATE) { - status = SCI_FAILURE; - - dev_warn(scic_to_dev(scic), - "%s: Controller stop operation failed to stop " - "phy %d because of status %d.\n", - __func__, - ihost->phys[index].sci.phy_index, phy_status); - } - } - - return status; -} - -static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controller *scic) -{ - u32 index; - enum sci_status status; - enum sci_status device_status; - - status = SCI_SUCCESS; - - for (index = 0; index < scic->remote_node_entries; index++) { - if (scic->device_table[index] != NULL) { - /* / @todo What timeout value do we want to provide to this request? */ - device_status = scic_remote_device_stop(scic->device_table[index], 0); - - if ((device_status != SCI_SUCCESS) && - (device_status != SCI_FAILURE_INVALID_STATE)) { - dev_warn(scic_to_dev(scic), - "%s: Controller stop operation failed " - "to stop device 0x%p because of " - "status %d.\n", - __func__, - scic->device_table[index], device_status); - } - } - } - - return status; -} - -static void scic_sds_controller_power_control_timer_start(struct scic_sds_controller *scic) -{ - isci_timer_start(scic->power_control.timer, - SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); - - scic->power_control.timer_started = true; -} - -static void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic) -{ - if (scic->power_control.timer_started) { - isci_timer_stop(scic->power_control.timer); - scic->power_control.timer_started = false; - } -} - -static void scic_sds_controller_power_control_timer_restart(struct scic_sds_controller *scic) -{ - scic_sds_controller_power_control_timer_stop(scic); - scic_sds_controller_power_control_timer_start(scic); -} - -static void scic_sds_controller_power_control_timer_handler( - void *controller) -{ - struct scic_sds_controller *scic; - - scic = (struct scic_sds_controller *)controller; - - scic->power_control.phys_granted_power = 0; - - if (scic->power_control.phys_waiting == 0) { - scic->power_control.timer_started = false; - } else { - struct scic_sds_phy *sci_phy = NULL; - u8 i; - - for (i = 0; - (i < SCI_MAX_PHYS) - && (scic->power_control.phys_waiting != 0); - i++) { - if (scic->power_control.requesters[i] != NULL) { - if (scic->power_control.phys_granted_power < - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { - sci_phy = scic->power_control.requesters[i]; - scic->power_control.requesters[i] = NULL; - scic->power_control.phys_waiting--; - scic->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(sci_phy); - } else { - break; - } - } - } - - /* - * It doesn't matter if the power list is empty, we need to start the - * timer in case another phy becomes ready. - */ - scic_sds_controller_power_control_timer_start(scic); - } -} - -/** - * This method inserts the phy in the stagger spinup control queue. - * @scic: - * - * - */ -void scic_sds_controller_power_control_queue_insert( - struct scic_sds_controller *scic, - struct scic_sds_phy *sci_phy) -{ - BUG_ON(sci_phy == NULL); - - if (scic->power_control.phys_granted_power < - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { - scic->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(sci_phy); - - /* - * stop and start the power_control timer. When the timer fires, the - * no_of_phys_granted_power will be set to 0 - */ - scic_sds_controller_power_control_timer_restart(scic); - } else { - /* Add the phy in the waiting list */ - scic->power_control.requesters[sci_phy->phy_index] = sci_phy; - scic->power_control.phys_waiting++; - } -} - -/** - * This method removes the phy from the stagger spinup control queue. - * @scic: - * - * - */ -void scic_sds_controller_power_control_queue_remove( - struct scic_sds_controller *scic, - struct scic_sds_phy *sci_phy) -{ - BUG_ON(sci_phy == NULL); - - if (scic->power_control.requesters[sci_phy->phy_index] != NULL) { - scic->power_control.phys_waiting--; - } - - scic->power_control.requesters[sci_phy->phy_index] = NULL; -} - -/* - * ****************************************************************************- - * * SCIC SDS Controller Completion Routines - * ****************************************************************************- */ - -/** - * This method returns a true value if the completion queue has entries that - * can be processed - * @scic: - * - * bool true if the completion queue has entries to process false if the - * completion queue has no entries to process - */ -static bool scic_sds_controller_completion_queue_has_entries( - struct scic_sds_controller *scic) -{ - u32 get_value = scic->completion_queue_get; - u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; - - if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) == - COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index])) - return true; - - return false; -} - -/** - * This method processes a task completion notification. This is called from - * within the controller completion handler. - * @scic: - * @completion_entry: - * - */ -static void scic_sds_controller_task_completion( - struct scic_sds_controller *scic, - u32 completion_entry) -{ - u32 index; - struct scic_sds_request *io_request; - - index = SCU_GET_COMPLETION_INDEX(completion_entry); - io_request = scic->io_request_table[index]; - - /* Make sure that we really want to process this IO request */ - if ( - (io_request != NULL) - && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) - && ( - scic_sds_io_tag_get_sequence(io_request->io_tag) - == scic->io_request_sequence[index] - ) - ) { - /* Yep this is a valid io request pass it along to the io request handler */ - scic_sds_io_request_tc_completion(io_request, completion_entry); - } -} - -/** - * This method processes an SDMA completion event. This is called from within - * the controller completion handler. - * @scic: - * @completion_entry: - * - */ -static void scic_sds_controller_sdma_completion( - struct scic_sds_controller *scic, - u32 completion_entry) -{ - u32 index; - struct scic_sds_request *io_request; - struct scic_sds_remote_device *device; - - index = SCU_GET_COMPLETION_INDEX(completion_entry); - - switch (scu_get_command_request_type(completion_entry)) { - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: - io_request = scic->io_request_table[index]; - dev_warn(scic_to_dev(scic), - "%s: SCIC SDS Completion type SDMA %x for io request " - "%p\n", - __func__, - completion_entry, - io_request); - /* @todo For a post TC operation we need to fail the IO - * request - */ - break; - - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: - device = scic->device_table[index]; - dev_warn(scic_to_dev(scic), - "%s: SCIC SDS Completion type SDMA %x for remote " - "device %p\n", - __func__, - completion_entry, - device); - /* @todo For a port RNC operation we need to fail the - * device - */ - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: SCIC SDS Completion unknown SDMA completion " - "type %x\n", - __func__, - completion_entry); - break; - - } -} - -static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *scic, - u32 completion_entry) -{ - u32 index; - u32 frame_index; - - struct isci_host *ihost = scic_to_ihost(scic); - struct scu_unsolicited_frame_header *frame_header; - struct scic_sds_phy *phy; - struct scic_sds_remote_device *device; - - enum sci_status result = SCI_FAILURE; - - frame_index = SCU_GET_FRAME_INDEX(completion_entry); - - frame_header = scic->uf_control.buffers.array[frame_index].header; - scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; - - if (SCU_GET_FRAME_ERROR(completion_entry)) { - /* - * / @todo If the IAF frame or SIGNATURE FIS frame has an error will - * / this cause a problem? We expect the phy initialization will - * / fail if there is an error in the frame. */ - scic_sds_controller_release_frame(scic, frame_index); - return; - } - - if (frame_header->is_address_frame) { - index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &ihost->phys[index].sci; - result = scic_sds_phy_frame_handler(phy, frame_index); - } else { - - index = SCU_GET_COMPLETION_INDEX(completion_entry); - - if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - /* - * This is a signature fis or a frame from a direct attached SATA - * device that has not yet been created. In either case forwared - * the frame to the PE and let it take care of the frame data. */ - index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &ihost->phys[index].sci; - result = scic_sds_phy_frame_handler(phy, frame_index); - } else { - if (index < scic->remote_node_entries) - device = scic->device_table[index]; - else - device = NULL; - - if (device != NULL) - result = scic_sds_remote_device_frame_handler(device, frame_index); - else - scic_sds_controller_release_frame(scic, frame_index); - } - } - - if (result != SCI_SUCCESS) { - /* - * / @todo Is there any reason to report some additional error message - * / when we get this failure notifiction? */ - } -} - -static void scic_sds_controller_event_completion(struct scic_sds_controller *scic, - u32 completion_entry) -{ - struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_request *io_request; - struct scic_sds_remote_device *device; - struct scic_sds_phy *phy; - u32 index; - - index = SCU_GET_COMPLETION_INDEX(completion_entry); - - switch (scu_get_event_type(completion_entry)) { - case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: - /* / @todo The driver did something wrong and we need to fix the condtion. */ - dev_err(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received SMU command error " - "0x%x\n", - __func__, - scic, - completion_entry); - break; - - case SCU_EVENT_TYPE_SMU_PCQ_ERROR: - case SCU_EVENT_TYPE_SMU_ERROR: - case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR: - /* - * / @todo This is a hardware failure and its likely that we want to - * / reset the controller. */ - dev_err(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received fatal controller " - "event 0x%x\n", - __func__, - scic, - completion_entry); - break; - - case SCU_EVENT_TYPE_TRANSPORT_ERROR: - io_request = scic->io_request_table[index]; - scic_sds_io_request_event_handler(io_request, completion_entry); - break; - - case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: - switch (scu_get_event_specifier(completion_entry)) { - case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: - case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: - io_request = scic->io_request_table[index]; - if (io_request != NULL) - scic_sds_io_request_event_handler(io_request, completion_entry); - else - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received " - "event 0x%x for io request object " - "that doesnt exist.\n", - __func__, - scic, - completion_entry); - - break; - - case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: - device = scic->device_table[index]; - if (device != NULL) - scic_sds_remote_device_event_handler(device, completion_entry); - else - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received " - "event 0x%x for remote device object " - "that doesnt exist.\n", - __func__, - scic, - completion_entry); - - break; - } - break; - - case SCU_EVENT_TYPE_BROADCAST_CHANGE: - /* - * direct the broadcast change event to the phy first and then let - * the phy redirect the broadcast change to the port object */ - case SCU_EVENT_TYPE_ERR_CNT_EVENT: - /* - * direct error counter event to the phy object since that is where - * we get the event notification. This is a type 4 event. */ - case SCU_EVENT_TYPE_OSSP_EVENT: - index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &ihost->phys[index].sci; - scic_sds_phy_event_handler(phy, completion_entry); - break; - - case SCU_EVENT_TYPE_RNC_SUSPEND_TX: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - case SCU_EVENT_TYPE_RNC_OPS_MISC: - if (index < scic->remote_node_entries) { - device = scic->device_table[index]; - - if (device != NULL) - scic_sds_remote_device_event_handler(device, completion_entry); - } else - dev_err(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received event 0x%x " - "for remote device object 0x%0x that doesnt " - "exist.\n", - __func__, - scic, - completion_entry, - index); - - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller received unknown event code %x\n", - __func__, - completion_entry); - break; - } -} - -/** - * This method is a private routine for processing the completion queue entries. - * @scic: - * - */ -static void scic_sds_controller_process_completions( - struct scic_sds_controller *scic) -{ - u32 completion_count = 0; - u32 completion_entry; - u32 get_index; - u32 get_cycle; - u32 event_index; - u32 event_cycle; - - dev_dbg(scic_to_dev(scic), - "%s: completion queue begining get:0x%08x\n", - __func__, - scic->completion_queue_get); - - /* Get the component parts of the completion queue */ - get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get); - get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get; - - event_index = NORMALIZE_EVENT_POINTER(scic->completion_queue_get); - event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get; - - while ( - NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) - == COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index]) - ) { - completion_count++; - - completion_entry = scic->completion_queue[get_index]; - INCREMENT_COMPLETION_QUEUE_GET(scic, get_index, get_cycle); - - dev_dbg(scic_to_dev(scic), - "%s: completion queue entry:0x%08x\n", - __func__, - completion_entry); - - switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { - case SCU_COMPLETION_TYPE_TASK: - scic_sds_controller_task_completion(scic, completion_entry); - break; - - case SCU_COMPLETION_TYPE_SDMA: - scic_sds_controller_sdma_completion(scic, completion_entry); - break; - - case SCU_COMPLETION_TYPE_UFI: - scic_sds_controller_unsolicited_frame(scic, completion_entry); - break; - - case SCU_COMPLETION_TYPE_EVENT: - INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); - scic_sds_controller_event_completion(scic, completion_entry); - break; - - case SCU_COMPLETION_TYPE_NOTIFY: - /* - * Presently we do the same thing with a notify event that we do with the - * other event codes. */ - INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); - scic_sds_controller_event_completion(scic, completion_entry); - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller received unknown " - "completion type %x\n", - __func__, - completion_entry); - break; - } - } - - /* Update the get register if we completed one or more entries */ - if (completion_count > 0) { - scic->completion_queue_get = - SMU_CQGR_GEN_BIT(ENABLE) | - SMU_CQGR_GEN_BIT(EVENT_ENABLE) | - event_cycle | - SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) | - get_cycle | - SMU_CQGR_GEN_VAL(POINTER, get_index); - - writel(scic->completion_queue_get, - &scic->smu_registers->completion_queue_get); - - } - - dev_dbg(scic_to_dev(scic), - "%s: completion queue ending get:0x%08x\n", - __func__, - scic->completion_queue_get); - -} - -bool scic_sds_controller_isr(struct scic_sds_controller *scic) -{ - if (scic_sds_controller_completion_queue_has_entries(scic)) { - return true; - } else { - /* - * we have a spurious interrupt it could be that we have already - * emptied the completion queue from a previous interrupt */ - writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); - - /* - * There is a race in the hardware that could cause us not to be notified - * of an interrupt completion if we do not take this step. We will mask - * then unmask the interrupts so if there is another interrupt pending - * the clearing of the interrupt source we get the next interrupt message. */ - writel(0xFF000000, &scic->smu_registers->interrupt_mask); - writel(0, &scic->smu_registers->interrupt_mask); - } - - return false; -} - -void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) -{ - /* Empty out the completion queue */ - if (scic_sds_controller_completion_queue_has_entries(scic)) - scic_sds_controller_process_completions(scic); - - /* Clear the interrupt and enable all interrupts again */ - writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); - /* Could we write the value of SMU_ISR_COMPLETION? */ - writel(0xFF000000, &scic->smu_registers->interrupt_mask); - writel(0, &scic->smu_registers->interrupt_mask); -} - -bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) -{ - u32 interrupt_status; - - interrupt_status = - readl(&scic->smu_registers->interrupt_status); - interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); - - if (interrupt_status != 0) { - /* - * There is an error interrupt pending so let it through and handle - * in the callback */ - return true; - } - - /* - * There is a race in the hardware that could cause us not to be notified - * of an interrupt completion if we do not take this step. We will mask - * then unmask the error interrupts so if there was another interrupt - * pending we will be notified. - * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ - writel(0xff, &scic->smu_registers->interrupt_mask); - writel(0, &scic->smu_registers->interrupt_mask); - - return false; -} - -void scic_sds_controller_error_handler(struct scic_sds_controller *scic) -{ - u32 interrupt_status; - - interrupt_status = - readl(&scic->smu_registers->interrupt_status); - - if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && - scic_sds_controller_completion_queue_has_entries(scic)) { - - scic_sds_controller_process_completions(scic); - writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status); - } else { - dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, - interrupt_status); - - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_FAILED); - - return; - } - - /* If we dont process any completions I am not sure that we want to do this. - * We are in the middle of a hardware fault and should probably be reset. - */ - writel(0, &scic->smu_registers->interrupt_mask); -} - - - - -void scic_sds_controller_link_up(struct scic_sds_controller *scic, - struct scic_sds_port *port, struct scic_sds_phy *phy) -{ - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_STARTING: - scic_sds_controller_phy_timer_stop(scic); - scic->port_agent.link_up_handler(scic, &scic->port_agent, - port, phy); - scic_sds_controller_start_next_phy(scic); - break; - case SCI_BASE_CONTROLLER_STATE_READY: - scic->port_agent.link_up_handler(scic, &scic->port_agent, - port, phy); - break; - default: - dev_dbg(scic_to_dev(scic), - "%s: SCIC Controller linkup event from phy %d in " - "unexpected state %d\n", __func__, phy->phy_index, - scic->state_machine.current_state_id); - } -} - -void scic_sds_controller_link_down(struct scic_sds_controller *scic, - struct scic_sds_port *port, struct scic_sds_phy *phy) -{ - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_STARTING: - case SCI_BASE_CONTROLLER_STATE_READY: - scic->port_agent.link_down_handler(scic, &scic->port_agent, - port, phy); - break; - default: - dev_dbg(scic_to_dev(scic), - "%s: SCIC Controller linkdown event from phy %d in " - "unexpected state %d\n", - __func__, - phy->phy_index, - scic->state_machine.current_state_id); - } -} - -/** - * This is a helper method to determine if any remote devices on this - * controller are still in the stopping state. - * - */ -static bool scic_sds_controller_has_remote_devices_stopping( - struct scic_sds_controller *controller) -{ - u32 index; - - for (index = 0; index < controller->remote_node_entries; index++) { - if ((controller->device_table[index] != NULL) && - (controller->device_table[index]->state_machine.current_state_id - == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)) - return true; - } - - return false; -} - -/** - * This method is called by the remote device to inform the controller - * object that the remote device has stopped. - */ -void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev) -{ - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_STOPPING) { - dev_dbg(scic_to_dev(scic), - "SCIC Controller 0x%p remote device stopped event " - "from device 0x%p in unexpected state %d\n", - scic, sci_dev, - scic->state_machine.current_state_id); - return; - } - - if (!scic_sds_controller_has_remote_devices_stopping(scic)) { - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STOPPED); - } -} - -/** - * This method will write to the SCU PCP register the request value. The method - * is used to suspend/resume ports, devices, and phys. - * @scic: - * - * - */ -void scic_sds_controller_post_request( - struct scic_sds_controller *scic, - u32 request) -{ - dev_dbg(scic_to_dev(scic), - "%s: SCIC Controller 0x%p post request 0x%08x\n", - __func__, - scic, - request); - - writel(request, &scic->smu_registers->post_context_port); -} - -/** - * This method will copy the soft copy of the task context into the physical - * memory accessible by the controller. - * @scic: This parameter specifies the controller for which to copy - * the task context. - * @sci_req: This parameter specifies the request for which the task - * context is being copied. - * - * After this call is made the SCIC_SDS_IO_REQUEST object will always point to - * the physical memory version of the task context. Thus, all subsequent - * updates to the task context are performed in the TC table (i.e. DMAable - * memory). none - */ -void scic_sds_controller_copy_task_context( - struct scic_sds_controller *scic, - struct scic_sds_request *sci_req) -{ - struct scu_task_context *task_context_buffer; - - task_context_buffer = scic_sds_controller_get_task_context_buffer( - scic, sci_req->io_tag); - - memcpy(task_context_buffer, - sci_req->task_context_buffer, - offsetof(struct scu_task_context, sgl_snapshot_ac)); - - /* - * Now that the soft copy of the TC has been copied into the TC - * table accessible by the silicon. Thus, any further changes to - * the TC (e.g. TC termination) occur in the appropriate location. */ - sci_req->task_context_buffer = task_context_buffer; -} - -/** - * This method returns the task context buffer for the given io tag. - * @scic: - * @io_tag: - * - * struct scu_task_context* - */ -struct scu_task_context *scic_sds_controller_get_task_context_buffer( - struct scic_sds_controller *scic, - u16 io_tag - ) { - u16 task_index = scic_sds_io_tag_get_index(io_tag); - - if (task_index < scic->task_context_entries) { - return &scic->task_context_table[task_index]; - } - - return NULL; -} - -struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, - u16 io_tag) -{ - u16 task_index; - u16 task_sequence; - - task_index = scic_sds_io_tag_get_index(io_tag); - - if (task_index < scic->task_context_entries) { - if (scic->io_request_table[task_index] != NULL) { - task_sequence = scic_sds_io_tag_get_sequence(io_tag); - - if (task_sequence == scic->io_request_sequence[task_index]) { - return scic->io_request_table[task_index]; - } - } - } - - return NULL; -} - -/** - * This method allocates remote node index and the reserves the remote node - * context space for use. This method can fail if there are no more remote - * node index available. - * @scic: This is the controller object which contains the set of - * free remote node ids - * @sci_dev: This is the device object which is requesting the a remote node - * id - * @node_id: This is the remote node id that is assinged to the device if one - * is available - * - * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote - * node index available. - */ -enum sci_status scic_sds_controller_allocate_remote_node_context( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 *node_id) -{ - u16 node_index; - u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); - - node_index = scic_sds_remote_node_table_allocate_remote_node( - &scic->available_remote_nodes, remote_node_count - ); - - if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - scic->device_table[node_index] = sci_dev; - - *node_id = node_index; - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INSUFFICIENT_RESOURCES; -} - -/** - * This method frees the remote node index back to the available pool. Once - * this is done the remote node context buffer is no longer valid and can - * not be used. - * @scic: - * @sci_dev: - * @node_id: - * - */ -void scic_sds_controller_free_remote_node_context( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 node_id) -{ - u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); - - if (scic->device_table[node_id] == sci_dev) { - scic->device_table[node_id] = NULL; - - scic_sds_remote_node_table_release_remote_node_index( - &scic->available_remote_nodes, remote_node_count, node_id - ); - } -} - -/** - * This method returns the union scu_remote_node_context for the specified remote - * node id. - * @scic: - * @node_id: - * - * union scu_remote_node_context* - */ -union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( - struct scic_sds_controller *scic, - u16 node_id - ) { - if ( - (node_id < scic->remote_node_entries) - && (scic->device_table[node_id] != NULL) - ) { - return &scic->remote_node_context_table[node_id]; - } - - return NULL; -} - -/** - * - * @resposne_buffer: This is the buffer into which the D2H register FIS will be - * constructed. - * @frame_header: This is the frame header returned by the hardware. - * @frame_buffer: This is the frame buffer returned by the hardware. - * - * This method will combind the frame header and frame buffer to create a SATA - * D2H register FIS none - */ -void scic_sds_controller_copy_sata_response( - void *response_buffer, - void *frame_header, - void *frame_buffer) -{ - memcpy(response_buffer, frame_header, sizeof(u32)); - - memcpy(response_buffer + sizeof(u32), - frame_buffer, - sizeof(struct dev_to_host_fis) - sizeof(u32)); -} - -/** - * This method releases the frame once this is done the frame is available for - * re-use by the hardware. The data contained in the frame header and frame - * buffer is no longer valid. The UF queue get pointer is only updated if UF - * control indicates this is appropriate. - * @scic: - * @frame_index: - * - */ -void scic_sds_controller_release_frame( - struct scic_sds_controller *scic, - u32 frame_index) -{ - if (scic_sds_unsolicited_frame_control_release_frame( - &scic->uf_control, frame_index) == true) - writel(scic->uf_control.get, - &scic->scu_registers->sdma.unsolicited_frame_get_pointer); -} - -/** - * This method sets user parameters and OEM parameters to default values. - * Users can override these values utilizing the scic_user_parameters_set() - * and scic_oem_parameters_set() methods. - * @scic: This parameter specifies the controller for which to set the - * configuration parameters to their default values. - * - */ -static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - u16 index; - - /* Default to APC mode. */ - scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; - - /* Default to APC mode. */ - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1; - - /* Default to no SSC operation. */ - scic->oem_parameters.sds1.controller.do_enable_ssc = false; - - /* Initialize all of the port parameter information to narrow ports. */ - for (index = 0; index < SCI_MAX_PORTS; index++) { - scic->oem_parameters.sds1.ports[index].phy_mask = 0; - } - - /* Initialize all of the phy parameter information. */ - for (index = 0; index < SCI_MAX_PHYS; index++) { - /* Default to 6G (i.e. Gen 3) for now. */ - scic->user_parameters.sds1.phys[index].max_speed_generation = 3; - - /* the frequencies cannot be 0 */ - scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f; - scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff; - scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; - - /* - * Previous Vitesse based expanders had a arbitration issue that - * is worked around by having the upper 32-bits of SAS address - * with a value greater then the Vitesse company identifier. - * Hence, usage of 0x5FCFFFFF. */ - scic->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id; - scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF; - } - - scic->user_parameters.sds1.stp_inactivity_timeout = 5; - scic->user_parameters.sds1.ssp_inactivity_timeout = 5; - scic->user_parameters.sds1.stp_max_occupancy_timeout = 5; - scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20; - scic->user_parameters.sds1.no_outbound_task_timeout = 20; -} - -/** - * scic_controller_get_suggested_start_timeout() - This method returns the - * suggested scic_controller_start() timeout amount. The user is free to - * use any timeout value, but this method provides the suggested minimum - * start timeout value. The returned value is based upon empirical - * information determined as a result of interoperability testing. - * @controller: the handle to the controller object for which to return the - * suggested start timeout. - * - * This method returns the number of milliseconds for the suggested start - * operation timeout. - */ -u32 scic_controller_get_suggested_start_timeout( - struct scic_sds_controller *sc) -{ - /* Validate the user supplied parameters. */ - if (sc == NULL) - return 0; - - /* - * The suggested minimum timeout value for a controller start operation: - * - * Signature FIS Timeout - * + Phy Start Timeout - * + Number of Phy Spin Up Intervals - * --------------------------------- - * Number of milliseconds for the controller start operation. - * - * NOTE: The number of phy spin up intervals will be equivalent - * to the number of phys divided by the number phys allowed - * per interval - 1 (once OEM parameters are supported). - * Currently we assume only 1 phy per interval. */ - - return SCIC_SDS_SIGNATURE_FIS_TIMEOUT - + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT - + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); -} - -/** - * scic_controller_stop() - This method will stop an individual controller - * object.This method will invoke the associated user callback upon - * completion. The completion callback is called when the following - * conditions are met: -# the method return status is SCI_SUCCESS. -# the - * controller has been quiesced. This method will ensure that all IO - * requests are quiesced, phys are stopped, and all additional operation by - * the hardware is halted. - * @controller: the handle to the controller object to stop. - * @timeout: This parameter specifies the number of milliseconds in which the - * stop operation should complete. - * - * The controller must be in the STARTED or STOPPED state. Indicate if the - * controller stop method succeeded or failed in some way. SCI_SUCCESS if the - * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the - * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the - * controller is not either in the STARTED or STOPPED states. - */ -enum sci_status scic_controller_stop( - struct scic_sds_controller *scic, - u32 timeout) -{ - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), - "SCIC Controller stop operation requested in " - "invalid state\n"); - return SCI_FAILURE_INVALID_STATE; - } - - isci_timer_start(scic->timeout_timer, timeout); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STOPPING); - return SCI_SUCCESS; -} - -/** - * scic_controller_reset() - This method will reset the supplied core - * controller regardless of the state of said controller. This operation is - * considered destructive. In other words, all current operations are wiped - * out. No IO completions for outstanding devices occur. Outstanding IO - * requests are not aborted or completed at the actual remote device. - * @controller: the handle to the controller object to reset. - * - * Indicate if the controller reset method succeeded or failed in some way. - * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if - * the controller reset operation is unable to complete. - */ -enum sci_status scic_controller_reset( - struct scic_sds_controller *scic) -{ - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_RESET: - case SCI_BASE_CONTROLLER_STATE_READY: - case SCI_BASE_CONTROLLER_STATE_STOPPED: - case SCI_BASE_CONTROLLER_STATE_FAILED: - /* - * The reset operation is not a graceful cleanup, just - * perform the state transition. - */ - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESETTING); - return SCI_SUCCESS; - default: - dev_warn(scic_to_dev(scic), - "SCIC Controller reset operation requested in " - "invalid state\n"); - return SCI_FAILURE_INVALID_STATE; - } -} - -/** - * scic_controller_start_io() - This method is called by the SCI user to - * send/start an IO request. If the method invocation is successful, then - * the IO request has been queued to the hardware for processing. - * @controller: the handle to the controller object for which to start an IO - * request. - * @remote_device: the handle to the remote device object for which to start an - * IO request. - * @io_request: the handle to the io request object to start. - * @io_tag: This parameter specifies a previously allocated IO tag that the - * user desires to be utilized for this request. This parameter is optional. - * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value - * for this parameter. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a - * result, it is expected the user will have set the NCQ tag field in the host - * to device register FIS prior to calling this method. There is also a - * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking - * the scic_controller_start_io() method. scic_controller_allocate_tag() for - * more information on allocating a tag. Indicate if the controller - * successfully started the IO request. SCI_SUCCESS if the IO request was - * successfully started. Determine the failure situations and return values. - */ -enum sci_status scic_controller_start_io( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, - struct scic_sds_request *req, - u16 io_tag) -{ - enum sci_status status; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), "invalid state to start I/O"); - return SCI_FAILURE_INVALID_STATE; - } - - status = scic_sds_remote_device_start_io(scic, rdev, req); - if (status != SCI_SUCCESS) - return status; - - scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; - scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); - return SCI_SUCCESS; -} - -/** - * scic_controller_terminate_request() - This method is called by the SCI Core - * user to terminate an ongoing (i.e. started) core IO request. This does - * not abort the IO request at the target, but rather removes the IO request - * from the host controller. - * @controller: the handle to the controller object for which to terminate a - * request. - * @remote_device: the handle to the remote device object for which to - * terminate a request. - * @request: the handle to the io or task management request object to - * terminate. - * - * Indicate if the controller successfully began the terminate process for the - * IO request. SCI_SUCCESS if the terminate process was successfully started - * for the request. Determine the failure situations and return values. - */ -enum sci_status scic_controller_terminate_request( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, - struct scic_sds_request *req) -{ - enum sci_status status; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), - "invalid state to terminate request\n"); - return SCI_FAILURE_INVALID_STATE; - } - - status = scic_sds_io_request_terminate(req); - if (status != SCI_SUCCESS) - return status; - - /* - * Utilize the original post context command and or in the POST_TC_ABORT - * request sub-type. - */ - scic_sds_controller_post_request(scic, - scic_sds_request_get_post_context(req) | - SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); - return SCI_SUCCESS; -} - -/** - * scic_controller_complete_io() - This method will perform core specific - * completion operations for an IO request. After this method is invoked, - * the user should consider the IO request as invalid until it is properly - * reused (i.e. re-constructed). - * @controller: The handle to the controller object for which to complete the - * IO request. - * @remote_device: The handle to the remote device object for which to complete - * the IO request. - * @io_request: the handle to the io request object to complete. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI - * Core user, using the scic_controller_allocate_io_tag() method, then it is - * the responsibility of the caller to invoke the scic_controller_free_io_tag() - * method to free the tag (i.e. this method will not free the IO tag). Indicate - * if the controller successfully completed the IO request. SCI_SUCCESS if the - * completion process was successful. - */ -enum sci_status scic_controller_complete_io( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, - struct scic_sds_request *request) -{ - enum sci_status status; - u16 index; - - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_STOPPING: - /* XXX: Implement this function */ - return SCI_FAILURE; - case SCI_BASE_CONTROLLER_STATE_READY: - status = scic_sds_remote_device_complete_io(scic, rdev, request); - if (status != SCI_SUCCESS) - return status; - - index = scic_sds_io_tag_get_index(request->io_tag); - scic->io_request_table[index] = NULL; - return SCI_SUCCESS; - default: - dev_warn(scic_to_dev(scic), "invalid state to complete I/O"); - return SCI_FAILURE_INVALID_STATE; - } - -} - -enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) -{ - struct scic_sds_controller *scic = sci_req->owning_controller; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), "invalid state to continue I/O"); - return SCI_FAILURE_INVALID_STATE; - } - - scic->io_request_table[scic_sds_io_tag_get_index(sci_req->io_tag)] = sci_req; - scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req)); - return SCI_SUCCESS; -} - -/** - * scic_controller_start_task() - This method is called by the SCIC user to - * send/start a framework task management request. - * @controller: the handle to the controller object for which to start the task - * management request. - * @remote_device: the handle to the remote device object for which to start - * the task management request. - * @task_request: the handle to the task request object to start. - * @io_tag: This parameter specifies a previously allocated IO tag that the - * user desires to be utilized for this request. Note this not the io_tag - * of the request being managed. It is to be utilized for the task request - * itself. This parameter is optional. The user is allowed to supply - * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - The user must synchronize this task with completion - * queue processing. If they are not synchronized then it is possible for the - * io requests that are being managed by the task request can complete before - * starting the task request. scic_controller_allocate_tag() for more - * information on allocating a tag. Indicate if the controller successfully - * started the IO request. SCI_TASK_SUCCESS if the task request was - * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is - * returned if there is/are task(s) outstanding that require termination or - * completion before this request can succeed. - */ -enum sci_task_status scic_controller_start_task( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, - struct scic_sds_request *req, - u16 task_tag) -{ - enum sci_status status; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller starting task from invalid " - "state\n", - __func__); - return SCI_TASK_FAILURE_INVALID_STATE; - } - - status = scic_sds_remote_device_start_task(scic, rdev, req); - switch (status) { - case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: - scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; - - /* - * We will let framework know this task request started successfully, - * although core is still woring on starting the request (to post tc when - * RNC is resumed.) - */ - return SCI_SUCCESS; - case SCI_SUCCESS: - scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; - - scic_sds_controller_post_request(scic, - scic_sds_request_get_post_context(req)); - break; - default: - break; - } - - return status; -} - -/** - * scic_controller_allocate_io_tag() - This method will allocate a tag from the - * pool of free IO tags. Direct allocation of IO tags by the SCI Core user - * is optional. The scic_controller_start_io() method will allocate an IO - * tag if this method is not utilized and the tag is not supplied to the IO - * construct routine. Direct allocation of IO tags may provide additional - * performance improvements in environments capable of supporting this usage - * model. Additionally, direct allocation of IO tags also provides - * additional flexibility to the SCI Core user. Specifically, the user may - * retain IO tags across the lives of multiple IO requests. - * @controller: the handle to the controller object for which to allocate the - * tag. - * - * IO tags are a protected resource. It is incumbent upon the SCI Core user to - * ensure that each of the methods that may allocate or free available IO tags - * are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). An unsigned integer representing an available IO tag. - * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no - * currently available tags to be allocated. All return other values indicate a - * legitimate tag. - */ -u16 scic_controller_allocate_io_tag( - struct scic_sds_controller *scic) -{ - u16 task_context; - u16 sequence_count; - - if (!sci_pool_empty(scic->tci_pool)) { - sci_pool_get(scic->tci_pool, task_context); - - sequence_count = scic->io_request_sequence[task_context]; - - return scic_sds_io_tag_construct(sequence_count, task_context); - } - - return SCI_CONTROLLER_INVALID_IO_TAG; -} - -/** - * scic_controller_free_io_tag() - This method will free an IO tag to the pool - * of free IO tags. This method provides the SCI Core user more flexibility - * with regards to IO tags. The user may desire to keep an IO tag after an - * IO request has completed, because they plan on re-using the tag for a - * subsequent IO request. This method is only legal if the tag was - * allocated via scic_controller_allocate_io_tag(). - * @controller: This parameter specifies the handle to the controller object - * for which to free/return the tag. - * @io_tag: This parameter represents the tag to be freed to the pool of - * available tags. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI - * Core user, using the scic_controller_allocate_io_tag() method, then it is - * the responsibility of the caller to invoke this method to free the tag. This - * method returns an indication of whether the tag was successfully put back - * (freed) to the pool of available tags. SCI_SUCCESS This return value - * indicates the tag was successfully placed into the pool of available IO - * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag - * is not a valid IO tag value. - */ -enum sci_status scic_controller_free_io_tag( - struct scic_sds_controller *scic, - u16 io_tag) -{ - u16 sequence; - u16 index; - - BUG_ON(io_tag == SCI_CONTROLLER_INVALID_IO_TAG); - - sequence = scic_sds_io_tag_get_sequence(io_tag); - index = scic_sds_io_tag_get_index(io_tag); - - if (!sci_pool_full(scic->tci_pool)) { - if (sequence == scic->io_request_sequence[index]) { - scic_sds_io_sequence_increment( - scic->io_request_sequence[index]); - - sci_pool_put(scic->tci_pool, index); - - return SCI_SUCCESS; - } - } - - return SCI_FAILURE_INVALID_IO_TAG; -} - -void scic_controller_enable_interrupts( - struct scic_sds_controller *scic) -{ - BUG_ON(scic->smu_registers == NULL); - writel(0, &scic->smu_registers->interrupt_mask); -} - -void scic_controller_disable_interrupts( - struct scic_sds_controller *scic) -{ - BUG_ON(scic->smu_registers == NULL); - writel(0xffffffff, &scic->smu_registers->interrupt_mask); -} - -static enum sci_status scic_controller_set_mode( - struct scic_sds_controller *scic, - enum sci_controller_mode operating_mode) -{ - enum sci_status status = SCI_SUCCESS; - - if ((scic->state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_INITIALIZING) || - (scic->state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_INITIALIZED)) { - switch (operating_mode) { - case SCI_MODE_SPEED: - scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; - scic->task_context_entries = SCU_IO_REQUEST_COUNT; - scic->uf_control.buffers.count = - SCU_UNSOLICITED_FRAME_COUNT; - scic->completion_event_entries = SCU_EVENT_COUNT; - scic->completion_queue_entries = - SCU_COMPLETION_QUEUE_COUNT; - break; - - case SCI_MODE_SIZE: - scic->remote_node_entries = SCI_MIN_REMOTE_DEVICES; - scic->task_context_entries = SCI_MIN_IO_REQUESTS; - scic->uf_control.buffers.count = - SCU_MIN_UNSOLICITED_FRAMES; - scic->completion_event_entries = SCU_MIN_EVENTS; - scic->completion_queue_entries = - SCU_MIN_COMPLETION_QUEUE_ENTRIES; - break; - - default: - status = SCI_FAILURE_INVALID_PARAMETER_VALUE; - break; - } - } else - status = SCI_FAILURE_INVALID_STATE; - - return status; -} - -/** - * scic_sds_controller_reset_hardware() - - * - * This method will reset the controller hardware. - */ -static void scic_sds_controller_reset_hardware( - struct scic_sds_controller *scic) -{ - /* Disable interrupts so we dont take any spurious interrupts */ - scic_controller_disable_interrupts(scic); - - /* Reset the SCU */ - writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control); - - /* Delay for 1ms to before clearing the CQP and UFQPR. */ - udelay(1000); - - /* The write to the CQGR clears the CQP */ - writel(0x00000000, &scic->smu_registers->completion_queue_get); - - /* The write to the UFQGP clears the UFQPR */ - writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer); -} - -enum sci_status scic_user_parameters_set( - struct scic_sds_controller *scic, - union scic_user_parameters *scic_parms) -{ - u32 state = scic->state_machine.current_state_id; - - if (state == SCI_BASE_CONTROLLER_STATE_RESET || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { - u16 index; - - /* - * Validate the user parameters. If they are not legal, then - * return a failure. - */ - for (index = 0; index < SCI_MAX_PHYS; index++) { - struct sci_phy_user_params *user_phy; - - user_phy = &scic_parms->sds1.phys[index]; - - if (!((user_phy->max_speed_generation <= - SCIC_SDS_PARM_MAX_SPEED) && - (user_phy->max_speed_generation > - SCIC_SDS_PARM_NO_SPEED))) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - - if (user_phy->in_connection_align_insertion_frequency < - 3) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - - if ((user_phy->in_connection_align_insertion_frequency < - 3) || - (user_phy->align_insertion_frequency == 0) || - (user_phy-> - notify_enable_spin_up_insertion_frequency == - 0)) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } - - if ((scic_parms->sds1.stp_inactivity_timeout == 0) || - (scic_parms->sds1.ssp_inactivity_timeout == 0) || - (scic_parms->sds1.stp_max_occupancy_timeout == 0) || - (scic_parms->sds1.ssp_max_occupancy_timeout == 0) || - (scic_parms->sds1.no_outbound_task_timeout == 0)) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - - memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms)); - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_STATE; -} - -int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) -{ - int i; - - for (i = 0; i < SCI_MAX_PORTS; i++) - if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) - return -EINVAL; - - for (i = 0; i < SCI_MAX_PHYS; i++) - if (oem->phys[i].sas_address.high == 0 && - oem->phys[i].sas_address.low == 0) - return -EINVAL; - - if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { - for (i = 0; i < SCI_MAX_PHYS; i++) - if (oem->ports[i].phy_mask != 0) - return -EINVAL; - } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - u8 phy_mask = 0; - - for (i = 0; i < SCI_MAX_PHYS; i++) - phy_mask |= oem->ports[i].phy_mask; - - if (phy_mask == 0) - return -EINVAL; - } else - return -EINVAL; - - if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) - return -EINVAL; - - return 0; -} - -enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic, - union scic_oem_parameters *scic_parms) -{ - u32 state = scic->state_machine.current_state_id; - - if (state == SCI_BASE_CONTROLLER_STATE_RESET || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { - - if (scic_oem_parameters_validate(&scic_parms->sds1)) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - scic->oem_parameters.sds1 = scic_parms->sds1; - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_STATE; -} - -void scic_oem_parameters_get( - struct scic_sds_controller *scic, - union scic_oem_parameters *scic_parms) -{ - memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms)); -} - -#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 -#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280 -#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000 -#define INTERRUPT_COALESCE_NUMBER_MAX 256 -#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7 -#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28 - -/** - * scic_controller_set_interrupt_coalescence() - This method allows the user to - * configure the interrupt coalescence. - * @controller: This parameter represents the handle to the controller object - * for which its interrupt coalesce register is overridden. - * @coalesce_number: Used to control the number of entries in the Completion - * Queue before an interrupt is generated. If the number of entries exceed - * this number, an interrupt will be generated. The valid range of the input - * is [0, 256]. A setting of 0 results in coalescing being disabled. - * @coalesce_timeout: Timeout value in microseconds. The valid range of the - * input is [0, 2700000] . A setting of 0 is allowed and results in no - * interrupt coalescing timeout. - * - * Indicate if the user successfully set the interrupt coalesce parameters. - * SCI_SUCCESS The user successfully updated the interrutp coalescence. - * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. - */ -static enum sci_status scic_controller_set_interrupt_coalescence( - struct scic_sds_controller *scic_controller, - u32 coalesce_number, - u32 coalesce_timeout) -{ - u8 timeout_encode = 0; - u32 min = 0; - u32 max = 0; - - /* Check if the input parameters fall in the range. */ - if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - - /* - * Defined encoding for interrupt coalescing timeout: - * Value Min Max Units - * ----- --- --- ----- - * 0 - - Disabled - * 1 13.3 20.0 ns - * 2 26.7 40.0 - * 3 53.3 80.0 - * 4 106.7 160.0 - * 5 213.3 320.0 - * 6 426.7 640.0 - * 7 853.3 1280.0 - * 8 1.7 2.6 us - * 9 3.4 5.1 - * 10 6.8 10.2 - * 11 13.7 20.5 - * 12 27.3 41.0 - * 13 54.6 81.9 - * 14 109.2 163.8 - * 15 218.5 327.7 - * 16 436.9 655.4 - * 17 873.8 1310.7 - * 18 1.7 2.6 ms - * 19 3.5 5.2 - * 20 7.0 10.5 - * 21 14.0 21.0 - * 22 28.0 41.9 - * 23 55.9 83.9 - * 24 111.8 167.8 - * 25 223.7 335.5 - * 26 447.4 671.1 - * 27 894.8 1342.2 - * 28 1.8 2.7 s - * Others Undefined */ - - /* - * Use the table above to decide the encode of interrupt coalescing timeout - * value for register writing. */ - if (coalesce_timeout == 0) - timeout_encode = 0; - else{ - /* make the timeout value in unit of (10 ns). */ - coalesce_timeout = coalesce_timeout * 100; - min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10; - max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10; - - /* get the encode of timeout for register writing. */ - for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN; - timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX; - timeout_encode++) { - if (min <= coalesce_timeout && max > coalesce_timeout) - break; - else if (coalesce_timeout >= max && coalesce_timeout < min * 2 - && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) { - if ((coalesce_timeout - max) < (2 * min - coalesce_timeout)) - break; - else{ - timeout_encode++; - break; - } - } else { - max = max * 2; - min = min * 2; - } - } - - if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1) - /* the value is out of range. */ - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } - - writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | - SMU_ICC_GEN_VAL(TIMER, timeout_encode), - &scic_controller->smu_registers->interrupt_coalesce_control); - - - scic_controller->interrupt_coalesce_number = (u16)coalesce_number; - scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100; - - return SCI_SUCCESS; -} - - - -enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) -{ - struct sci_base_state_machine *sm = &scic->state_machine; - enum sci_status result = SCI_SUCCESS; - struct isci_host *ihost = scic_to_ihost(scic); - u32 index, state; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_RESET) { - dev_warn(scic_to_dev(scic), - "SCIC Controller initialize operation requested " - "in invalid state\n"); - return SCI_FAILURE_INVALID_STATE; - } - - sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); - - scic->timeout_timer = isci_timer_create(ihost, - scic, - scic_sds_controller_timeout_handler); - - scic_sds_controller_initialize_phy_startup(scic); - - scic_sds_controller_initialize_power_control(scic); - - /* - * There is nothing to do here for B0 since we do not have to - * program the AFE registers. - * / @todo The AFE settings are supposed to be correct for the B0 but - * / presently they seem to be wrong. */ - scic_sds_controller_afe_initialization(scic); - - if (result == SCI_SUCCESS) { - u32 status; - u32 terminate_loop; - - /* Take the hardware out of reset */ - writel(0, &scic->smu_registers->soft_reset_control); - - /* - * / @todo Provide meaningfull error code for hardware failure - * result = SCI_FAILURE_CONTROLLER_HARDWARE; */ - result = SCI_FAILURE; - terminate_loop = 100; - - while (terminate_loop-- && (result != SCI_SUCCESS)) { - /* Loop until the hardware reports success */ - udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); - status = readl(&scic->smu_registers->control_status); - - if ((status & SCU_RAM_INIT_COMPLETED) == - SCU_RAM_INIT_COMPLETED) - result = SCI_SUCCESS; - } - } - - if (result == SCI_SUCCESS) { - u32 max_supported_ports; - u32 max_supported_devices; - u32 max_supported_io_requests; - u32 device_context_capacity; - - /* - * Determine what are the actaul device capacities that the - * hardware will support */ - device_context_capacity = - readl(&scic->smu_registers->device_context_capacity); - - - max_supported_ports = smu_dcc_get_max_ports(device_context_capacity); - max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity); - max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity); - - /* - * Make all PEs that are unassigned match up with the - * logical ports - */ - for (index = 0; index < max_supported_ports; index++) { - struct scu_port_task_scheduler_group_registers __iomem - *ptsg = &scic->scu_registers->peg0.ptsg; - - writel(index, &ptsg->protocol_engine[index]); - } - - /* Record the smaller of the two capacity values */ - scic->logical_port_entries = - min(max_supported_ports, scic->logical_port_entries); - - scic->task_context_entries = - min(max_supported_io_requests, - scic->task_context_entries); - - scic->remote_node_entries = - min(max_supported_devices, scic->remote_node_entries); - - /* - * Now that we have the correct hardware reported minimum values - * build the MDL for the controller. Default to a performance - * configuration. - */ - scic_controller_set_mode(scic, SCI_MODE_SPEED); - } - - /* Initialize hardware PCI Relaxed ordering in DMA engines */ - if (result == SCI_SUCCESS) { - u32 dma_configuration; - - /* Configure the payload DMA */ - dma_configuration = - readl(&scic->scu_registers->sdma.pdma_configuration); - dma_configuration |= - SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - writel(dma_configuration, - &scic->scu_registers->sdma.pdma_configuration); - - /* Configure the control DMA */ - dma_configuration = - readl(&scic->scu_registers->sdma.cdma_configuration); - dma_configuration |= - SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - writel(dma_configuration, - &scic->scu_registers->sdma.cdma_configuration); - } - - /* - * Initialize the PHYs before the PORTs because the PHY registers - * are accessed during the port initialization. - */ - if (result == SCI_SUCCESS) { - /* Initialize the phys */ - for (index = 0; - (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS); - index++) { - result = scic_sds_phy_initialize( - &ihost->phys[index].sci, - &scic->scu_registers->peg0.pe[index].tl, - &scic->scu_registers->peg0.pe[index].ll); - } - } - - if (result == SCI_SUCCESS) { - /* Initialize the logical ports */ - for (index = 0; - (index < scic->logical_port_entries) && - (result == SCI_SUCCESS); - index++) { - result = scic_sds_port_initialize( - &ihost->ports[index].sci, - &scic->scu_registers->peg0.ptsg.port[index], - &scic->scu_registers->peg0.ptsg.protocol_engine, - &scic->scu_registers->peg0.viit[index]); - } - } - - if (result == SCI_SUCCESS) - result = scic_sds_port_configuration_agent_initialize( - scic, - &scic->port_agent); - - /* Advance the controller state machine */ - if (result == SCI_SUCCESS) - state = SCI_BASE_CONTROLLER_STATE_INITIALIZED; - else - state = SCI_BASE_CONTROLLER_STATE_FAILED; - sci_base_state_machine_change_state(sm, state); - - return result; -} - -enum sci_status scic_controller_start(struct scic_sds_controller *scic, - u32 timeout) -{ - struct isci_host *ihost = scic_to_ihost(scic); - enum sci_status result; - u16 index; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_INITIALIZED) { - dev_warn(scic_to_dev(scic), - "SCIC Controller start operation requested in " - "invalid state\n"); - return SCI_FAILURE_INVALID_STATE; - } - - /* Build the TCi free pool */ - sci_pool_initialize(scic->tci_pool); - for (index = 0; index < scic->task_context_entries; index++) - sci_pool_put(scic->tci_pool, index); - - /* Build the RNi free pool */ - scic_sds_remote_node_table_initialize( - &scic->available_remote_nodes, - scic->remote_node_entries); - - /* - * Before anything else lets make sure we will not be - * interrupted by the hardware. - */ - scic_controller_disable_interrupts(scic); - - /* Enable the port task scheduler */ - scic_sds_controller_enable_port_task_scheduler(scic); - - /* Assign all the task entries to scic physical function */ - scic_sds_controller_assign_task_entries(scic); - - /* Now initialize the completion queue */ - scic_sds_controller_initialize_completion_queue(scic); - - /* Initialize the unsolicited frame queue for use */ - scic_sds_controller_initialize_unsolicited_frame_queue(scic); - - /* Start all of the ports on this controller */ - for (index = 0; index < scic->logical_port_entries; index++) { - struct scic_sds_port *sci_port = &ihost->ports[index].sci; - - result = sci_port->state_handlers->start_handler(sci_port); - if (result) - return result; - } - - scic_sds_controller_start_next_phy(scic); - - isci_timer_start(scic->timeout_timer, timeout); - - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STARTING); - - return SCI_SUCCESS; -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on entry - * to the SCI_BASE_CONTROLLER_STATE_INITIAL. - Set the state handlers to the - * controllers initial state. none This function should initialize the - * controller object. - */ -static void scic_sds_controller_initial_state_enter(void *object) -{ - struct scic_sds_controller *scic = object; - - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESET); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on exit - * from the SCI_BASE_CONTROLLER_STATE_STARTING. - This function stops the - * controller starting timeout timer. none - */ -static inline void scic_sds_controller_starting_state_exit(void *object) -{ - struct scic_sds_controller *scic = object; - - isci_timer_stop(scic->timeout_timer); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on entry - * to the SCI_BASE_CONTROLLER_STATE_READY. - Set the state handlers to the - * controllers ready state. none - */ -static void scic_sds_controller_ready_state_enter(void *object) -{ - struct scic_sds_controller *scic = object; - - /* set the default interrupt coalescence number and timeout value. */ - scic_controller_set_interrupt_coalescence( - scic, 0x10, 250); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on exit - * from the SCI_BASE_CONTROLLER_STATE_READY. - This function does nothing. none - */ -static void scic_sds_controller_ready_state_exit(void *object) -{ - struct scic_sds_controller *scic = object; - - /* disable interrupt coalescence. */ - scic_controller_set_interrupt_coalescence(scic, 0, 0); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on entry - * to the SCI_BASE_CONTROLLER_STATE_READY. - Set the state handlers to the - * controllers ready state. - Stop the phys on this controller - Stop the ports - * on this controller - Stop all of the remote devices on this controller none - */ -static void scic_sds_controller_stopping_state_enter(void *object) -{ - struct scic_sds_controller *scic = object; - - /* Stop all of the components for this controller */ - scic_sds_controller_stop_phys(scic); - scic_sds_controller_stop_ports(scic); - scic_sds_controller_stop_devices(scic); -} - -/** - * - * @object: This is the object which is cast to a struct - * scic_sds_controller object. - * - * This function implements the actions taken by the struct scic_sds_controller - * on exit from the SCI_BASE_CONTROLLER_STATE_STOPPING. - - * This function stops the controller stopping timeout timer. - */ -static inline void scic_sds_controller_stopping_state_exit(void *object) -{ - struct scic_sds_controller *scic = object; - - isci_timer_stop(scic->timeout_timer); -} - -static void scic_sds_controller_resetting_state_enter(void *object) -{ - struct scic_sds_controller *scic = object; - - scic_sds_controller_reset_hardware(scic); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESET); -} - -static const struct sci_base_state scic_sds_controller_state_table[] = { - [SCI_BASE_CONTROLLER_STATE_INITIAL] = { - .enter_state = scic_sds_controller_initial_state_enter, - }, - [SCI_BASE_CONTROLLER_STATE_RESET] = {}, - [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = {}, - [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = {}, - [SCI_BASE_CONTROLLER_STATE_STARTING] = { - .exit_state = scic_sds_controller_starting_state_exit, - }, - [SCI_BASE_CONTROLLER_STATE_READY] = { - .enter_state = scic_sds_controller_ready_state_enter, - .exit_state = scic_sds_controller_ready_state_exit, - }, - [SCI_BASE_CONTROLLER_STATE_RESETTING] = { - .enter_state = scic_sds_controller_resetting_state_enter, - }, - [SCI_BASE_CONTROLLER_STATE_STOPPING] = { - .enter_state = scic_sds_controller_stopping_state_enter, - .exit_state = scic_sds_controller_stopping_state_exit, - }, - [SCI_BASE_CONTROLLER_STATE_STOPPED] = {}, - [SCI_BASE_CONTROLLER_STATE_FAILED] = {} -}; - -/** - * scic_controller_construct() - This method will attempt to construct a - * controller object utilizing the supplied parameter information. - * @c: This parameter specifies the controller to be constructed. - * @scu_base: mapped base address of the scu registers - * @smu_base: mapped base address of the smu registers - * - * Indicate if the controller was successfully constructed or if it failed in - * some way. SCI_SUCCESS This value is returned if the controller was - * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned - * if the interrupt coalescence timer may cause SAS compliance issues for SMP - * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE - * This value is returned if the controller does not support the supplied type. - * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the - * controller does not support the supplied initialization data version. - */ -enum sci_status scic_controller_construct(struct scic_sds_controller *scic, - void __iomem *scu_base, - void __iomem *smu_base) -{ - struct isci_host *ihost = scic_to_ihost(scic); - u8 i; - - sci_base_state_machine_construct(&scic->state_machine, - scic, scic_sds_controller_state_table, - SCI_BASE_CONTROLLER_STATE_INITIAL); - - sci_base_state_machine_start(&scic->state_machine); - - scic->scu_registers = scu_base; - scic->smu_registers = smu_base; - - scic_sds_port_configuration_agent_construct(&scic->port_agent); - - /* Construct the ports for this controller */ - for (i = 0; i < SCI_MAX_PORTS; i++) - scic_sds_port_construct(&ihost->ports[i].sci, i, scic); - scic_sds_port_construct(&ihost->ports[i].sci, SCIC_SDS_DUMMY_PORT, scic); - - /* Construct the phys for this controller */ - for (i = 0; i < SCI_MAX_PHYS; i++) { - /* Add all the PHYs to the dummy port */ - scic_sds_phy_construct(&ihost->phys[i].sci, - &ihost->ports[SCI_MAX_PORTS].sci, i); - } - - scic->invalid_phy_mask = 0; - - /* Set the default maximum values */ - scic->completion_event_entries = SCU_EVENT_COUNT; - scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; - scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; - scic->logical_port_entries = SCI_MAX_PORTS; - scic->task_context_entries = SCU_IO_REQUEST_COUNT; - scic->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT; - scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT; - - /* Initialize the User and OEM parameters to default values. */ - scic_sds_controller_set_default_config_parameters(scic); - - return scic_controller_reset(scic); -} diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h deleted file mode 100644 index 5c00f9688c1870ccf3af0daf5362b6cee397b4cb..0000000000000000000000000000000000000000 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ /dev/null @@ -1,576 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_CONTROLLER_H_ -#define _SCIC_SDS_CONTROLLER_H_ - -#include -#include - -/** - * This file contains the structures, constants and prototypes used for the - * core controller object. - * - * - */ - -#include "sci_pool.h" -#include "sci_base_state.h" -#include "sci_base_state_machine.h" -#include "scic_config_parameters.h" -#include "scic_sds_port.h" -#include "scic_sds_phy.h" -#include "remote_node_table.h" -#include "remote_device.h" -#include "scu_registers.h" -#include "scu_task_context.h" -#include "scu_unsolicited_frame.h" -#include "scic_sds_unsolicited_frame_control.h" -#include "scic_sds_port_configuration_agent.h" - -struct sci_base_remote_device; -struct scic_sds_remote_device; -struct scic_sds_request; -struct scic_sds_controller; - -/** - * struct scic_power_control - - * - * This structure defines the fields for managing power control for direct - * attached disk devices. - */ -struct scic_power_control { - /** - * This field is set when the power control timer is running and cleared when - * it is not. - */ - bool timer_started; - - /** - * This field is the handle to the driver timer object. This timer is used to - * control when the directed attached disks can consume power. - */ - void *timer; - - /** - * This field is used to keep track of how many phys are put into the - * requesters field. - */ - u8 phys_waiting; - - /** - * This field is used to keep track of how many phys have been granted to consume power - */ - u8 phys_granted_power; - - /** - * This field is an array of phys that we are waiting on. The phys are direct - * mapped into requesters via struct scic_sds_phy.phy_index - */ - struct scic_sds_phy *requesters[SCI_MAX_PHYS]; - -}; - -/** - * struct scic_sds_controller - - * - * This structure represents the SCU controller object. - */ -struct scic_sds_controller { - /** - * This field contains the information for the base controller state - * machine. - */ - struct sci_base_state_machine state_machine; - - /** - * This field is the driver timer object handler used to time the controller - * object start and stop requests. - */ - void *timeout_timer; - - /** - * This field contains the user parameters to be utilized for this - * core controller object. - */ - union scic_user_parameters user_parameters; - - /** - * This field contains the OEM parameters to be utilized for this - * core controller object. - */ - union scic_oem_parameters oem_parameters; - - /** - * This field contains the port configuration agent for this controller. - */ - struct scic_sds_port_configuration_agent port_agent; - - /** - * This field is the array of device objects that are currently constructed - * for this controller object. This table is used as a fast lookup of device - * objects that need to handle device completion notifications from the - * hardware. The table is RNi based. - */ - struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; - - /** - * This field is the array of IO request objects that are currently active for - * this controller object. This table is used as a fast lookup of the io - * request object that need to handle completion queue notifications. The - * table is TCi based. - */ - struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS]; - - /** - * This field is the free RNi data structure - */ - struct scic_remote_node_table available_remote_nodes; - - /** - * This field is the TCi pool used to manage the task context index. - */ - SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS); - - /** - * This filed is the struct scic_power_control data used to controll when direct - * attached devices can consume power. - */ - struct scic_power_control power_control; - - /** - * This field is the array of sequence values for the IO Tag fields. Even - * though only 4 bits of the field is used for the sequence the sequence is 16 - * bits in size so the sequence can be bitwise or'd with the TCi to build the - * IO Tag value. - */ - u16 io_request_sequence[SCI_MAX_IO_REQUESTS]; - - /** - * This field in the array of sequence values for the RNi. These are used - * to control io request build to io request start operations. The sequence - * value is recorded into an io request when it is built and is checked on - * the io request start operation to make sure that there was not a device - * hot plug between the build and start operation. - */ - u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES]; - - /** - * This field is a pointer to the memory allocated by the driver for the task - * context table. This data is shared between the hardware and software. - */ - struct scu_task_context *task_context_table; - - /** - * This field is a pointer to the memory allocated by the driver for the - * remote node context table. This table is shared between the hardware and - * software. - */ - union scu_remote_node_context *remote_node_context_table; - - /** - * This field is a pointer to the completion queue. This memory is - * written to by the hardware and read by the software. - */ - u32 *completion_queue; - - /** - * This field is the software copy of the completion queue get pointer. The - * controller object writes this value to the hardware after processing the - * completion entries. - */ - u32 completion_queue_get; - - /** - * This field is the minimum of the number of hardware supported port entries - * and the software requested port entries. - */ - u32 logical_port_entries; - - /** - * This field is the minimum number of hardware supported completion queue - * entries and the software requested completion queue entries. - */ - u32 completion_queue_entries; - - /** - * This field is the minimum number of hardware supported event entries and - * the software requested event entries. - */ - u32 completion_event_entries; - - /** - * This field is the minimum number of devices supported by the hardware and - * the number of devices requested by the software. - */ - u32 remote_node_entries; - - /** - * This field is the minimum number of IO requests supported by the hardware - * and the number of IO requests requested by the software. - */ - u32 task_context_entries; - - /** - * This object contains all of the unsolicited frame specific - * data utilized by the core controller. - */ - struct scic_sds_unsolicited_frame_control uf_control; - - /* Phy Startup Data */ - /** - * This field is the driver timer handle for controller phy request startup. - * On controller start the controller will start each PHY individually in - * order of phy index. - */ - void *phy_startup_timer; - - /** - * This field is set when the phy_startup_timer is running and is cleared when - * the phy_startup_timer is stopped. - */ - bool phy_startup_timer_pending; - - /** - * This field is the index of the next phy start. It is initialized to 0 and - * increments for each phy index that is started. - */ - u32 next_phy_to_start; - - /** - * This field controlls the invalid link up notifications to the SCI_USER. If - * an invalid_link_up notification is reported a bit for the PHY index is set - * so further notifications are not made. Once the PHY object reports link up - * and is made part of a port then this bit for the PHY index is cleared. - */ - u8 invalid_phy_mask; - - /* - * This field saves the current interrupt coalescing number of the controller. - */ - u16 interrupt_coalesce_number; - - /* - * This field saves the current interrupt coalescing timeout value in microseconds. - */ - u32 interrupt_coalesce_timeout; - - /** - * This field is a pointer to the memory mapped register space for the - * struct smu_registers. - */ - struct smu_registers __iomem *smu_registers; - - /** - * This field is a pointer to the memory mapped register space for the - * struct scu_registers. - */ - struct scu_registers __iomem *scu_registers; - -}; - -/** - * enum scic_sds_controller_states - This enumeration depicts all the states - * for the common controller state machine. - */ -enum scic_sds_controller_states { - /** - * Simply the initial state for the base controller state machine. - */ - SCI_BASE_CONTROLLER_STATE_INITIAL = 0, - - /** - * This state indicates that the controller is reset. The memory for - * the controller is in it's initial state, but the controller requires - * initialization. - * This state is entered from the INITIAL state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_CONTROLLER_STATE_RESET, - - /** - * This state is typically an action state that indicates the controller - * is in the process of initialization. In this state no new IO operations - * are permitted. - * This state is entered from the RESET state. - */ - SCI_BASE_CONTROLLER_STATE_INITIALIZING, - - /** - * This state indicates that the controller has been successfully - * initialized. In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - */ - SCI_BASE_CONTROLLER_STATE_INITIALIZED, - - /** - * This state indicates the the controller is in the process of becoming - * ready (i.e. starting). In this state no new IO operations are permitted. - * This state is entered from the INITIALIZED state. - */ - SCI_BASE_CONTROLLER_STATE_STARTING, - - /** - * This state indicates the controller is now ready. Thus, the user - * is able to perform IO operations on the controller. - * This state is entered from the STARTING state. - */ - SCI_BASE_CONTROLLER_STATE_READY, - - /** - * This state is typically an action state that indicates the controller - * is in the process of resetting. Thus, the user is unable to perform - * IO operations on the controller. A reset is considered destructive in - * most cases. - * This state is entered from the READY state. - * This state is entered from the FAILED state. - * This state is entered from the STOPPED state. - */ - SCI_BASE_CONTROLLER_STATE_RESETTING, - - /** - * This state indicates that the controller is in the process of stopping. - * In this state no new IO operations are permitted, but existing IO - * operations are allowed to complete. - * This state is entered from the READY state. - */ - SCI_BASE_CONTROLLER_STATE_STOPPING, - - /** - * This state indicates that the controller has successfully been stopped. - * In this state no new IO operations are permitted. - * This state is entered from the STOPPING state. - */ - SCI_BASE_CONTROLLER_STATE_STOPPED, - - /** - * This state indicates that the controller could not successfully be - * initialized. In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - * This state is entered from the STARTING state. - * This state is entered from the STOPPING state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_CONTROLLER_STATE_FAILED, - - SCI_BASE_CONTROLLER_MAX_STATES - -}; - -/** - * INCREMENT_QUEUE_GET() - - * - * This macro will increment the specified index to and if the index wraps to 0 - * it will toggel the cycle bit. - */ -#define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \ - { \ - if ((index) + 1 == entry_count) { \ - (index) = 0; \ - (cycle) = (cycle) ^ (bit_toggle); \ - } else { \ - index = index + 1; \ - } \ - } - -/** - * scic_sds_controller_get_port_configuration_agent() - - * - * This is a helper macro to get the port configuration agent from the - * controller object. - */ -#define scic_sds_controller_get_port_configuration_agent(controller) \ - (&(controller)->port_agent) - -/** - * scic_sds_controller_get_protocol_engine_group() - - * - * This macro returns the protocol engine group for this controller object. - * Presently we only support protocol engine group 0 so just return that - */ -#define scic_sds_controller_get_protocol_engine_group(controller) 0 - -/** - * scic_sds_io_tag_construct() - - * - * This macro constructs an IO tag from the sequence and index values. - */ -#define scic_sds_io_tag_construct(sequence, task_index) \ - ((sequence) << 12 | (task_index)) - -/** - * scic_sds_io_tag_get_sequence() - - * - * This macro returns the IO sequence from the IO tag value. - */ -#define scic_sds_io_tag_get_sequence(io_tag) \ - (((io_tag) & 0xF000) >> 12) - -/** - * scic_sds_io_tag_get_index() - - * - * This macro returns the TCi from the io tag value - */ -#define scic_sds_io_tag_get_index(io_tag) \ - ((io_tag) & 0x0FFF) - -/** - * scic_sds_io_sequence_increment() - - * - * This is a helper macro to increment the io sequence count. We may find in - * the future that it will be faster to store the sequence count in such a way - * as we dont perform the shift operation to build io tag values so therefore - * need a way to incrment them correctly - */ -#define scic_sds_io_sequence_increment(value) \ - ((value) = (((value) + 1) & 0x000F)) - -/* expander attached sata devices require 3 rnc slots */ -static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev) -{ - struct domain_device *dev = sci_dev_to_domain(sci_dev); - - if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && - !sci_dev->is_direct_attached) - return SCU_STP_REMOTE_NODE_COUNT; - return SCU_SSP_REMOTE_NODE_COUNT; -} - -/** - * scic_sds_controller_set_invalid_phy() - - * - * This macro will set the bit in the invalid phy mask for this controller - * object. This is used to control messages reported for invalid link up - * notifications. - */ -#define scic_sds_controller_set_invalid_phy(controller, phy) \ - ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index)) - -/** - * scic_sds_controller_clear_invalid_phy() - - * - * This macro will clear the bit in the invalid phy mask for this controller - * object. This is used to control messages reported for invalid link up - * notifications. - */ -#define scic_sds_controller_clear_invalid_phy(controller, phy) \ - ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) - -void scic_sds_controller_post_request( - struct scic_sds_controller *this_controller, - u32 request); - -void scic_sds_controller_release_frame( - struct scic_sds_controller *this_controller, - u32 frame_index); - -void scic_sds_controller_copy_sata_response( - void *response_buffer, - void *frame_header, - void *frame_buffer); - -enum sci_status scic_sds_controller_allocate_remote_node_context( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *sci_dev, - u16 *node_id); - -void scic_sds_controller_free_remote_node_context( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *sci_dev, - u16 node_id); - -union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( - struct scic_sds_controller *this_controller, - u16 node_id); - -struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, - u16 io_tag); - -struct scu_task_context *scic_sds_controller_get_task_context_buffer( - struct scic_sds_controller *this_controller, - u16 io_tag); - -void scic_sds_controller_power_control_queue_insert( - struct scic_sds_controller *this_controller, - struct scic_sds_phy *sci_phy); - -void scic_sds_controller_power_control_queue_remove( - struct scic_sds_controller *this_controller, - struct scic_sds_phy *sci_phy); - -void scic_sds_controller_link_up( - struct scic_sds_controller *this_controller, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -void scic_sds_controller_link_down( - struct scic_sds_controller *this_controller, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -void scic_sds_controller_remote_device_stopped( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *sci_dev); - -void scic_sds_controller_copy_task_context( - struct scic_sds_controller *this_controller, - struct scic_sds_request *this_request); - -void scic_sds_controller_register_setup( - struct scic_sds_controller *this_controller); - -enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req); - -#endif /* _SCIC_SDS_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index c6df0e2c842ea0f36beaed416cf47efae14db735..c82ccb93fd9b713bdbcd41aaac385e7ede84b3a3 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -55,14 +55,13 @@ #include #include "sas.h" +#include "host.h" #include "sci_base_state.h" #include "sci_base_state_machine.h" #include "scic_phy.h" -#include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_node_context.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" #include "timers.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 9302e397e4cad86c77e8e67aacedb7a9bb4c218a..652d823d5fa396bf025b56f52bdcb690fdc8f196 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -53,16 +53,14 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "scic_controller.h" +#include "host.h" #include "scic_phy.h" #include "scic_port.h" -#include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" #include "scic_sds_request.h" -#include "sci_environment.h" #include "scu_registers.h" #include "timers.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 3696debcce1247f4b84f5ccc4ddfd995885aaf01..bd612d576093cb654e1f0e973349fbca007c2bb5 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -57,6 +57,7 @@ #define _SCIC_SDS_PORT_H_ #include +#include "isci.h" #include "sas.h" #include "scu_registers.h" #include "sci_base_state_machine.h" diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index 3fad8c1db6c94827788d37b0d8352d67b173c0c0..a5871fddc09a45e8a4dca6d8a17ccdfad5a728ab 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -53,9 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "sci_environment.h" -#include "scic_controller.h" -#include "scic_sds_controller.h" +#include "host.h" #include "scic_sds_port_configuration_agent.h" #include "timers.h" diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index de35885eb1f97580cf1914f6fed95b47435ca4fc..1405aa703c3a6efadc0b79d7210173ece6911c06 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -54,9 +54,7 @@ */ #include -#include "scic_controller.h" #include "scic_io_request.h" -#include "scic_sds_controller.h" #include "scu_registers.h" #include "scic_sds_port.h" #include "remote_device.h" @@ -64,7 +62,6 @@ #include "scic_sds_smp_request.h" #include "scic_sds_stp_request.h" #include "scic_sds_unsolicited_frame_control.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 2b911206e8d25fa2e27cfed85ad91527b2bc51d8..7f338948ae0d5f74b24ecd774fe5f8ceca95a69d 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -55,15 +55,13 @@ #include #include "sci_base_state_machine.h" -#include "scic_controller.h" -#include "scic_sds_controller.h" #include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_smp_request.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_task_context.h" +#include "host.h" static void scu_smp_request_construct_task_context( struct scic_sds_request *sci_req, diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index 18bf3874d6ac938dc4181a3a904c14696fb19e9d..137f6ddac82c2e7ec64cecb2743640522922780f 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -53,11 +53,9 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "host.h" #include "sci_base_state_machine.h" -#include "scic_controller.h" -#include "scic_sds_controller.h" #include "scic_sds_request.h" -#include "sci_environment.h" #include "scu_completion_codes.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index c1c316cad522402ef70874bae20f40e21c0a4932..2f5095130cad8565efc24df8e3d3cc96744a9d1a 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -58,13 +58,11 @@ #include "sci_base_state.h" #include "sci_base_state_machine.h" #include "scic_io_request.h" -#include "scic_sds_controller.h" #include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_stp_pio_request.h" #include "scic_sds_stp_request.h" #include "scic_sds_unsolicited_frame_control.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c index 9e393e5df8ec33eaa8c62551b4ea502bce37a1d1..d0e03731377efb7674c3b8d73797263f7331d62c 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c @@ -53,19 +53,10 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the implementation of the - * struct scic_sds_unsolicited_frame_control object and it's public, protected, and - * private methods. - * - * - */ - +#include "host.h" #include "scic_sds_unsolicited_frame_control.h" #include "scu_registers.h" -#include "scic_sds_controller.h" #include "sci_util.h" -#include "sci_environment.h" /** * This method will program the unsolicited frames (UFs) into the UF address diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 5847149857a9b2e372095e080631b9956f16649e..43a5d7a8b2919701038518324c92c9490b0d4896 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -52,18 +52,198 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - +#include +#include +#include "host.h" #include "isci.h" -#include "scic_io_request.h" -#include "scic_port.h" #include "port.h" -#include "request.h" #include "host.h" #include "probe_roms.h" -#include "scic_controller.h" -#include "scic_sds_controller.h" +#include "remote_device.h" +#include "request.h" +#include "scic_io_request.h" +#include "scic_sds_port_configuration_agent.h" +#include "sci_util.h" +#include "scu_completion_codes.h" +#include "scu_event_codes.h" +#include "scu_registers.h" +#include "scu_remote_node_context.h" +#include "scu_task_context.h" +#include "scu_unsolicited_frame.h" #include "timers.h" +#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 + +/** + * smu_dcc_get_max_ports() - + * + * This macro returns the maximum number of logical ports supported by the + * hardware. The caller passes in the value read from the device context + * capacity register and this macro will mash and shift the value appropriately. + */ +#define smu_dcc_get_max_ports(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \ + ) + +/** + * smu_dcc_get_max_task_context() - + * + * This macro returns the maximum number of task contexts supported by the + * hardware. The caller passes in the value read from the device context + * capacity register and this macro will mash and shift the value appropriately. + */ +#define smu_dcc_get_max_task_context(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \ + ) + +/** + * smu_dcc_get_max_remote_node_context() - + * + * This macro returns the maximum number of remote node contexts supported by + * the hardware. The caller passes in the value read from the device context + * capacity register and this macro will mash and shift the value appropriately. + */ +#define smu_dcc_get_max_remote_node_context(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \ + ) + + +#define SCIC_SDS_CONTROLLER_MIN_TIMER_COUNT 3 +#define SCIC_SDS_CONTROLLER_MAX_TIMER_COUNT 3 + +/** + * + * + * The number of milliseconds to wait for a phy to start. + */ +#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100 + +/** + * + * + * The number of milliseconds to wait while a given phy is consuming power + * before allowing another set of phys to consume power. Ultimately, this will + * be specified by OEM parameter. + */ +#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500 + +/** + * NORMALIZE_PUT_POINTER() - + * + * This macro will normalize the completion queue put pointer so its value can + * be used as an array inde + */ +#define NORMALIZE_PUT_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK) + + +/** + * NORMALIZE_EVENT_POINTER() - + * + * This macro will normalize the completion queue event entry so its value can + * be used as an index. + */ +#define NORMALIZE_EVENT_POINTER(x) \ + (\ + ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \ + >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \ + ) + +/** + * INCREMENT_COMPLETION_QUEUE_GET() - + * + * This macro will increment the controllers completion queue index value and + * possibly toggle the cycle bit if the completion queue index wraps back to 0. + */ +#define INCREMENT_COMPLETION_QUEUE_GET(controller, index, cycle) \ + INCREMENT_QUEUE_GET(\ + (index), \ + (cycle), \ + (controller)->completion_queue_entries, \ + SMU_CQGR_CYCLE_BIT \ + ) + +/** + * INCREMENT_EVENT_QUEUE_GET() - + * + * This macro will increment the controllers event queue index value and + * possibly toggle the event cycle bit if the event queue index wraps back to 0. + */ +#define INCREMENT_EVENT_QUEUE_GET(controller, index, cycle) \ + INCREMENT_QUEUE_GET(\ + (index), \ + (cycle), \ + (controller)->completion_event_entries, \ + SMU_CQGR_EVENT_CYCLE_BIT \ + ) + + +/** + * NORMALIZE_GET_POINTER() - + * + * This macro will normalize the completion queue get pointer so its value can + * be used as an index into an array + */ +#define NORMALIZE_GET_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK) + +/** + * NORMALIZE_GET_POINTER_CYCLE_BIT() - + * + * This macro will normalize the completion queue cycle pointer so it matches + * the completion queue cycle bit + */ +#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \ + ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT)) + +/** + * COMPLETION_QUEUE_CYCLE_BIT() - + * + * This macro will return the cycle bit of the completion queue entry + */ +#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000) + +static bool scic_sds_controller_completion_queue_has_entries( + struct scic_sds_controller *scic) +{ + u32 get_value = scic->completion_queue_get; + u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; + + if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) == + COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index])) + return true; + + return false; +} + +static bool scic_sds_controller_isr(struct scic_sds_controller *scic) +{ + if (scic_sds_controller_completion_queue_has_entries(scic)) { + return true; + } else { + /* + * we have a spurious interrupt it could be that we have already + * emptied the completion queue from a previous interrupt */ + writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the interrupts so if there is another interrupt pending + * the clearing of the interrupt source we get the next interrupt message. */ + writel(0xFF000000, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); + } + + return false; +} + irqreturn_t isci_msix_isr(int vec, void *data) { struct isci_host *ihost = data; @@ -74,6 +254,411 @@ irqreturn_t isci_msix_isr(int vec, void *data) return IRQ_HANDLED; } +static bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) +{ + u32 interrupt_status; + + interrupt_status = + readl(&scic->smu_registers->interrupt_status); + interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); + + if (interrupt_status != 0) { + /* + * There is an error interrupt pending so let it through and handle + * in the callback */ + return true; + } + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the error interrupts so if there was another interrupt + * pending we will be notified. + * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ + writel(0xff, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); + + return false; +} + +static void scic_sds_controller_task_completion(struct scic_sds_controller *scic, + u32 completion_entry) +{ + u32 index; + struct scic_sds_request *io_request; + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + io_request = scic->io_request_table[index]; + + /* Make sure that we really want to process this IO request */ + if ( + (io_request != NULL) + && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) + && ( + scic_sds_io_tag_get_sequence(io_request->io_tag) + == scic->io_request_sequence[index] + ) + ) { + /* Yep this is a valid io request pass it along to the io request handler */ + scic_sds_io_request_tc_completion(io_request, completion_entry); + } +} + +static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic, + u32 completion_entry) +{ + u32 index; + struct scic_sds_request *io_request; + struct scic_sds_remote_device *device; + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + + switch (scu_get_command_request_type(completion_entry)) { + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: + io_request = scic->io_request_table[index]; + dev_warn(scic_to_dev(scic), + "%s: SCIC SDS Completion type SDMA %x for io request " + "%p\n", + __func__, + completion_entry, + io_request); + /* @todo For a post TC operation we need to fail the IO + * request + */ + break; + + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: + device = scic->device_table[index]; + dev_warn(scic_to_dev(scic), + "%s: SCIC SDS Completion type SDMA %x for remote " + "device %p\n", + __func__, + completion_entry, + device); + /* @todo For a port RNC operation we need to fail the + * device + */ + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: SCIC SDS Completion unknown SDMA completion " + "type %x\n", + __func__, + completion_entry); + break; + + } +} + +static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *scic, + u32 completion_entry) +{ + u32 index; + u32 frame_index; + + struct isci_host *ihost = scic_to_ihost(scic); + struct scu_unsolicited_frame_header *frame_header; + struct scic_sds_phy *phy; + struct scic_sds_remote_device *device; + + enum sci_status result = SCI_FAILURE; + + frame_index = SCU_GET_FRAME_INDEX(completion_entry); + + frame_header = scic->uf_control.buffers.array[frame_index].header; + scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; + + if (SCU_GET_FRAME_ERROR(completion_entry)) { + /* + * / @todo If the IAF frame or SIGNATURE FIS frame has an error will + * / this cause a problem? We expect the phy initialization will + * / fail if there is an error in the frame. */ + scic_sds_controller_release_frame(scic, frame_index); + return; + } + + if (frame_header->is_address_frame) { + index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + phy = &ihost->phys[index].sci; + result = scic_sds_phy_frame_handler(phy, frame_index); + } else { + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + + if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + /* + * This is a signature fis or a frame from a direct attached SATA + * device that has not yet been created. In either case forwared + * the frame to the PE and let it take care of the frame data. */ + index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + phy = &ihost->phys[index].sci; + result = scic_sds_phy_frame_handler(phy, frame_index); + } else { + if (index < scic->remote_node_entries) + device = scic->device_table[index]; + else + device = NULL; + + if (device != NULL) + result = scic_sds_remote_device_frame_handler(device, frame_index); + else + scic_sds_controller_release_frame(scic, frame_index); + } + } + + if (result != SCI_SUCCESS) { + /* + * / @todo Is there any reason to report some additional error message + * / when we get this failure notifiction? */ + } +} + +static void scic_sds_controller_event_completion(struct scic_sds_controller *scic, + u32 completion_entry) +{ + struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_request *io_request; + struct scic_sds_remote_device *device; + struct scic_sds_phy *phy; + u32 index; + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + + switch (scu_get_event_type(completion_entry)) { + case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: + /* / @todo The driver did something wrong and we need to fix the condtion. */ + dev_err(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received SMU command error " + "0x%x\n", + __func__, + scic, + completion_entry); + break; + + case SCU_EVENT_TYPE_SMU_PCQ_ERROR: + case SCU_EVENT_TYPE_SMU_ERROR: + case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR: + /* + * / @todo This is a hardware failure and its likely that we want to + * / reset the controller. */ + dev_err(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received fatal controller " + "event 0x%x\n", + __func__, + scic, + completion_entry); + break; + + case SCU_EVENT_TYPE_TRANSPORT_ERROR: + io_request = scic->io_request_table[index]; + scic_sds_io_request_event_handler(io_request, completion_entry); + break; + + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + switch (scu_get_event_specifier(completion_entry)) { + case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: + case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: + io_request = scic->io_request_table[index]; + if (io_request != NULL) + scic_sds_io_request_event_handler(io_request, completion_entry); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received " + "event 0x%x for io request object " + "that doesnt exist.\n", + __func__, + scic, + completion_entry); + + break; + + case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: + device = scic->device_table[index]; + if (device != NULL) + scic_sds_remote_device_event_handler(device, completion_entry); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received " + "event 0x%x for remote device object " + "that doesnt exist.\n", + __func__, + scic, + completion_entry); + + break; + } + break; + + case SCU_EVENT_TYPE_BROADCAST_CHANGE: + /* + * direct the broadcast change event to the phy first and then let + * the phy redirect the broadcast change to the port object */ + case SCU_EVENT_TYPE_ERR_CNT_EVENT: + /* + * direct error counter event to the phy object since that is where + * we get the event notification. This is a type 4 event. */ + case SCU_EVENT_TYPE_OSSP_EVENT: + index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + phy = &ihost->phys[index].sci; + scic_sds_phy_event_handler(phy, completion_entry); + break; + + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + case SCU_EVENT_TYPE_RNC_OPS_MISC: + if (index < scic->remote_node_entries) { + device = scic->device_table[index]; + + if (device != NULL) + scic_sds_remote_device_event_handler(device, completion_entry); + } else + dev_err(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received event 0x%x " + "for remote device object 0x%0x that doesnt " + "exist.\n", + __func__, + scic, + completion_entry, + index); + + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller received unknown event code %x\n", + __func__, + completion_entry); + break; + } +} + + + +static void scic_sds_controller_process_completions(struct scic_sds_controller *scic) +{ + u32 completion_count = 0; + u32 completion_entry; + u32 get_index; + u32 get_cycle; + u32 event_index; + u32 event_cycle; + + dev_dbg(scic_to_dev(scic), + "%s: completion queue begining get:0x%08x\n", + __func__, + scic->completion_queue_get); + + /* Get the component parts of the completion queue */ + get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get); + get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get; + + event_index = NORMALIZE_EVENT_POINTER(scic->completion_queue_get); + event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get; + + while ( + NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) + == COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index]) + ) { + completion_count++; + + completion_entry = scic->completion_queue[get_index]; + INCREMENT_COMPLETION_QUEUE_GET(scic, get_index, get_cycle); + + dev_dbg(scic_to_dev(scic), + "%s: completion queue entry:0x%08x\n", + __func__, + completion_entry); + + switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { + case SCU_COMPLETION_TYPE_TASK: + scic_sds_controller_task_completion(scic, completion_entry); + break; + + case SCU_COMPLETION_TYPE_SDMA: + scic_sds_controller_sdma_completion(scic, completion_entry); + break; + + case SCU_COMPLETION_TYPE_UFI: + scic_sds_controller_unsolicited_frame(scic, completion_entry); + break; + + case SCU_COMPLETION_TYPE_EVENT: + INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); + scic_sds_controller_event_completion(scic, completion_entry); + break; + + case SCU_COMPLETION_TYPE_NOTIFY: + /* + * Presently we do the same thing with a notify event that we do with the + * other event codes. */ + INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); + scic_sds_controller_event_completion(scic, completion_entry); + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller received unknown " + "completion type %x\n", + __func__, + completion_entry); + break; + } + } + + /* Update the get register if we completed one or more entries */ + if (completion_count > 0) { + scic->completion_queue_get = + SMU_CQGR_GEN_BIT(ENABLE) | + SMU_CQGR_GEN_BIT(EVENT_ENABLE) | + event_cycle | + SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) | + get_cycle | + SMU_CQGR_GEN_VAL(POINTER, get_index); + + writel(scic->completion_queue_get, + &scic->smu_registers->completion_queue_get); + + } + + dev_dbg(scic_to_dev(scic), + "%s: completion queue ending get:0x%08x\n", + __func__, + scic->completion_queue_get); + +} + +static void scic_sds_controller_error_handler(struct scic_sds_controller *scic) +{ + u32 interrupt_status; + + interrupt_status = + readl(&scic->smu_registers->interrupt_status); + + if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && + scic_sds_controller_completion_queue_has_entries(scic)) { + + scic_sds_controller_process_completions(scic); + writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status); + } else { + dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, + interrupt_status); + + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_FAILED); + + return; + } + + /* If we dont process any completions I am not sure that we want to do this. + * We are in the middle of a hardware fault and should probably be reset. + */ + writel(0, &scic->smu_registers->interrupt_mask); +} + irqreturn_t isci_intx_isr(int vec, void *data) { irqreturn_t ret = IRQ_NONE; @@ -112,7 +697,7 @@ irqreturn_t isci_error_isr(int vec, void *data) * core library. * */ -void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status) +static void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status) { if (completion_status != SCI_SUCCESS) dev_info(&ihost->pdev->dev, @@ -142,6 +727,383 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) } +/** + * scic_controller_get_suggested_start_timeout() - This method returns the + * suggested scic_controller_start() timeout amount. The user is free to + * use any timeout value, but this method provides the suggested minimum + * start timeout value. The returned value is based upon empirical + * information determined as a result of interoperability testing. + * @controller: the handle to the controller object for which to return the + * suggested start timeout. + * + * This method returns the number of milliseconds for the suggested start + * operation timeout. + */ +static u32 scic_controller_get_suggested_start_timeout( + struct scic_sds_controller *sc) +{ + /* Validate the user supplied parameters. */ + if (sc == NULL) + return 0; + + /* + * The suggested minimum timeout value for a controller start operation: + * + * Signature FIS Timeout + * + Phy Start Timeout + * + Number of Phy Spin Up Intervals + * --------------------------------- + * Number of milliseconds for the controller start operation. + * + * NOTE: The number of phy spin up intervals will be equivalent + * to the number of phys divided by the number phys allowed + * per interval - 1 (once OEM parameters are supported). + * Currently we assume only 1 phy per interval. */ + + return SCIC_SDS_SIGNATURE_FIS_TIMEOUT + + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT + + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); +} + +static void scic_controller_enable_interrupts( + struct scic_sds_controller *scic) +{ + BUG_ON(scic->smu_registers == NULL); + writel(0, &scic->smu_registers->interrupt_mask); +} + +void scic_controller_disable_interrupts( + struct scic_sds_controller *scic) +{ + BUG_ON(scic->smu_registers == NULL); + writel(0xffffffff, &scic->smu_registers->interrupt_mask); +} + +static void scic_sds_controller_enable_port_task_scheduler( + struct scic_sds_controller *scic) +{ + u32 port_task_scheduler_value; + + port_task_scheduler_value = + readl(&scic->scu_registers->peg0.ptsg.control); + port_task_scheduler_value |= + (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | + SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); + writel(port_task_scheduler_value, + &scic->scu_registers->peg0.ptsg.control); +} + +static void scic_sds_controller_assign_task_entries(struct scic_sds_controller *scic) +{ + u32 task_assignment; + + /* + * Assign all the TCs to function 0 + * TODO: Do we actually need to read this register to write it back? + */ + + task_assignment = + readl(&scic->smu_registers->task_context_assignment[0]); + + task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) | + (SMU_TCA_GEN_VAL(ENDING, scic->task_context_entries - 1)) | + (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)); + + writel(task_assignment, + &scic->smu_registers->task_context_assignment[0]); + +} + +static void scic_sds_controller_initialize_completion_queue(struct scic_sds_controller *scic) +{ + u32 index; + u32 completion_queue_control_value; + u32 completion_queue_get_value; + u32 completion_queue_put_value; + + scic->completion_queue_get = 0; + + completion_queue_control_value = ( + SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1) + | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1) + ); + + writel(completion_queue_control_value, + &scic->smu_registers->completion_queue_control); + + + /* Set the completion queue get pointer and enable the queue */ + completion_queue_get_value = ( + (SMU_CQGR_GEN_VAL(POINTER, 0)) + | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0)) + | (SMU_CQGR_GEN_BIT(ENABLE)) + | (SMU_CQGR_GEN_BIT(EVENT_ENABLE)) + ); + + writel(completion_queue_get_value, + &scic->smu_registers->completion_queue_get); + + /* Set the completion queue put pointer */ + completion_queue_put_value = ( + (SMU_CQPR_GEN_VAL(POINTER, 0)) + | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0)) + ); + + writel(completion_queue_put_value, + &scic->smu_registers->completion_queue_put); + + /* Initialize the cycle bit of the completion queue entries */ + for (index = 0; index < scic->completion_queue_entries; index++) { + /* + * If get.cycle_bit != completion_queue.cycle_bit + * its not a valid completion queue entry + * so at system start all entries are invalid */ + scic->completion_queue[index] = 0x80000000; + } +} + +static void scic_sds_controller_initialize_unsolicited_frame_queue(struct scic_sds_controller *scic) +{ + u32 frame_queue_control_value; + u32 frame_queue_get_value; + u32 frame_queue_put_value; + + /* Write the queue size */ + frame_queue_control_value = + SCU_UFQC_GEN_VAL(QUEUE_SIZE, + scic->uf_control.address_table.count); + + writel(frame_queue_control_value, + &scic->scu_registers->sdma.unsolicited_frame_queue_control); + + /* Setup the get pointer for the unsolicited frame queue */ + frame_queue_get_value = ( + SCU_UFQGP_GEN_VAL(POINTER, 0) + | SCU_UFQGP_GEN_BIT(ENABLE_BIT) + ); + + writel(frame_queue_get_value, + &scic->scu_registers->sdma.unsolicited_frame_get_pointer); + /* Setup the put pointer for the unsolicited frame queue */ + frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); + writel(frame_queue_put_value, + &scic->scu_registers->sdma.unsolicited_frame_put_pointer); +} + +/** + * This method will attempt to transition into the ready state for the + * controller and indicate that the controller start operation has completed + * if all criteria are met. + * @scic: This parameter indicates the controller object for which + * to transition to ready. + * @status: This parameter indicates the status value to be pass into the call + * to scic_cb_controller_start_complete(). + * + * none. + */ +static void scic_sds_controller_transition_to_ready( + struct scic_sds_controller *scic, + enum sci_status status) +{ + struct isci_host *ihost = scic_to_ihost(scic); + + if (scic->state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_STARTING) { + /* + * We move into the ready state, because some of the phys/ports + * may be up and operational. + */ + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_READY); + + isci_host_start_complete(ihost, status); + } +} + +static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic) +{ + isci_timer_stop(scic->phy_startup_timer); + + scic->phy_startup_timer_pending = false; +} + +static void scic_sds_controller_phy_timer_start(struct scic_sds_controller *scic) +{ + isci_timer_start(scic->phy_startup_timer, + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); + + scic->phy_startup_timer_pending = true; +} + +/** + * scic_sds_controller_start_next_phy - start phy + * @scic: controller + * + * If all the phys have been started, then attempt to transition the + * controller to the READY state and inform the user + * (scic_cb_controller_start_complete()). + */ +static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic) +{ + struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; + struct scic_sds_phy *sci_phy; + enum sci_status status; + + status = SCI_SUCCESS; + + if (scic->phy_startup_timer_pending) + return status; + + if (scic->next_phy_to_start >= SCI_MAX_PHYS) { + bool is_controller_start_complete = true; + u32 state; + u8 index; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + sci_phy = &ihost->phys[index].sci; + state = sci_phy->state_machine.current_state_id; + + if (!scic_sds_phy_get_port(sci_phy)) + continue; + + /* The controller start operation is complete iff: + * - all links have been given an opportunity to start + * - have no indication of a connected device + * - have an indication of a connected device and it has + * finished the link training process. + */ + if ((sci_phy->is_in_link_training == false && + state == SCI_BASE_PHY_STATE_INITIAL) || + (sci_phy->is_in_link_training == false && + state == SCI_BASE_PHY_STATE_STOPPED) || + (sci_phy->is_in_link_training == true && + state == SCI_BASE_PHY_STATE_STARTING)) { + is_controller_start_complete = false; + break; + } + } + + /* + * The controller has successfully finished the start process. + * Inform the SCI Core user and transition to the READY state. */ + if (is_controller_start_complete == true) { + scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS); + scic_sds_controller_phy_timer_stop(scic); + } + } else { + sci_phy = &ihost->phys[scic->next_phy_to_start].sci; + + if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + if (scic_sds_phy_get_port(sci_phy) == NULL) { + scic->next_phy_to_start++; + + /* Caution recursion ahead be forwarned + * + * The PHY was never added to a PORT in MPC mode + * so start the next phy in sequence This phy + * will never go link up and will not draw power + * the OEM parameters either configured the phy + * incorrectly for the PORT or it was never + * assigned to a PORT + */ + return scic_sds_controller_start_next_phy(scic); + } + } + + status = scic_sds_phy_start(sci_phy); + + if (status == SCI_SUCCESS) { + scic_sds_controller_phy_timer_start(scic); + } else { + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed " + "to stop phy %d because of status " + "%d.\n", + __func__, + ihost->phys[scic->next_phy_to_start].sci.phy_index, + status); + } + + scic->next_phy_to_start++; + } + + return status; +} + +static void scic_sds_controller_phy_startup_timeout_handler(void *_scic) +{ + struct scic_sds_controller *scic = _scic; + enum sci_status status; + + scic->phy_startup_timer_pending = false; + status = SCI_FAILURE; + while (status != SCI_SUCCESS) + status = scic_sds_controller_start_next_phy(scic); +} + +static enum sci_status scic_controller_start(struct scic_sds_controller *scic, + u32 timeout) +{ + struct isci_host *ihost = scic_to_ihost(scic); + enum sci_status result; + u16 index; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + dev_warn(scic_to_dev(scic), + "SCIC Controller start operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + /* Build the TCi free pool */ + sci_pool_initialize(scic->tci_pool); + for (index = 0; index < scic->task_context_entries; index++) + sci_pool_put(scic->tci_pool, index); + + /* Build the RNi free pool */ + scic_sds_remote_node_table_initialize( + &scic->available_remote_nodes, + scic->remote_node_entries); + + /* + * Before anything else lets make sure we will not be + * interrupted by the hardware. + */ + scic_controller_disable_interrupts(scic); + + /* Enable the port task scheduler */ + scic_sds_controller_enable_port_task_scheduler(scic); + + /* Assign all the task entries to scic physical function */ + scic_sds_controller_assign_task_entries(scic); + + /* Now initialize the completion queue */ + scic_sds_controller_initialize_completion_queue(scic); + + /* Initialize the unsolicited frame queue for use */ + scic_sds_controller_initialize_unsolicited_frame_queue(scic); + + /* Start all of the ports on this controller */ + for (index = 0; index < scic->logical_port_entries; index++) { + struct scic_sds_port *sci_port = &ihost->ports[index].sci; + + result = sci_port->state_handlers->start_handler(sci_port); + if (result) + return result; + } + + scic_sds_controller_start_next_phy(scic); + + isci_timer_start(scic->timeout_timer, timeout); + + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STARTING); + + return SCI_SUCCESS; +} + void isci_host_scan_start(struct Scsi_Host *shost) { struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; @@ -155,7 +1117,7 @@ void isci_host_scan_start(struct Scsi_Host *shost) spin_unlock_irq(&ihost->scic_lock); } -void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) +static void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) { isci_host_change_state(ihost, isci_stopped); scic_controller_disable_interrupts(&ihost->sci); @@ -163,6 +1125,19 @@ void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion wake_up(&ihost->eventq); } +static void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) +{ + /* Empty out the completion queue */ + if (scic_sds_controller_completion_queue_has_entries(scic)) + scic_sds_controller_process_completions(scic); + + /* Clear the interrupt and enable all interrupts again */ + writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); + /* Could we write the value of SMU_ISR_COMPLETION? */ + writel(0xFF000000, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); +} + /** * isci_host_completion_routine() - This function is the delayed service * routine that calls the sci core library's completion handler. It's @@ -273,11 +1248,80 @@ static void isci_host_completion_routine(unsigned long data) } -void isci_host_deinit(struct isci_host *ihost) +/** + * scic_controller_stop() - This method will stop an individual controller + * object.This method will invoke the associated user callback upon + * completion. The completion callback is called when the following + * conditions are met: -# the method return status is SCI_SUCCESS. -# the + * controller has been quiesced. This method will ensure that all IO + * requests are quiesced, phys are stopped, and all additional operation by + * the hardware is halted. + * @controller: the handle to the controller object to stop. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * The controller must be in the STARTED or STOPPED state. Indicate if the + * controller stop method succeeded or failed in some way. SCI_SUCCESS if the + * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the + * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the + * controller is not either in the STARTED or STOPPED states. + */ +static enum sci_status scic_controller_stop(struct scic_sds_controller *scic, + u32 timeout) { - int i; + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), + "SCIC Controller stop operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } - isci_host_change_state(ihost, isci_stopping); + isci_timer_start(scic->timeout_timer, timeout); + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STOPPING); + return SCI_SUCCESS; +} + +/** + * scic_controller_reset() - This method will reset the supplied core + * controller regardless of the state of said controller. This operation is + * considered destructive. In other words, all current operations are wiped + * out. No IO completions for outstanding devices occur. Outstanding IO + * requests are not aborted or completed at the actual remote device. + * @controller: the handle to the controller object to reset. + * + * Indicate if the controller reset method succeeded or failed in some way. + * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if + * the controller reset operation is unable to complete. + */ +static enum sci_status scic_controller_reset(struct scic_sds_controller *scic) +{ + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_RESET: + case SCI_BASE_CONTROLLER_STATE_READY: + case SCI_BASE_CONTROLLER_STATE_STOPPED: + case SCI_BASE_CONTROLLER_STATE_FAILED: + /* + * The reset operation is not a graceful cleanup, just + * perform the state transition. + */ + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_RESETTING); + return SCI_SUCCESS; + default: + dev_warn(scic_to_dev(scic), + "SCIC Controller reset operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } +} + +void isci_host_deinit(struct isci_host *ihost) +{ + int i; + + isci_host_change_state(ihost, isci_stopping); for (i = 0; i < SCI_MAX_PORTS; i++) { struct isci_port *iport = &ihost->ports[i]; struct isci_remote_device *idev, *d; @@ -341,6 +1385,1109 @@ static void isci_user_parameters_get( u->max_number_concurrent_device_spin_up = max_concurr_spinup; } +static void scic_sds_controller_initial_state_enter(void *object) +{ + struct scic_sds_controller *scic = object; + + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_RESET); +} + +static inline void scic_sds_controller_starting_state_exit(void *object) +{ + struct scic_sds_controller *scic = object; + + isci_timer_stop(scic->timeout_timer); +} + +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280 +#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000 +#define INTERRUPT_COALESCE_NUMBER_MAX 256 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28 + +/** + * scic_controller_set_interrupt_coalescence() - This method allows the user to + * configure the interrupt coalescence. + * @controller: This parameter represents the handle to the controller object + * for which its interrupt coalesce register is overridden. + * @coalesce_number: Used to control the number of entries in the Completion + * Queue before an interrupt is generated. If the number of entries exceed + * this number, an interrupt will be generated. The valid range of the input + * is [0, 256]. A setting of 0 results in coalescing being disabled. + * @coalesce_timeout: Timeout value in microseconds. The valid range of the + * input is [0, 2700000] . A setting of 0 is allowed and results in no + * interrupt coalescing timeout. + * + * Indicate if the user successfully set the interrupt coalesce parameters. + * SCI_SUCCESS The user successfully updated the interrutp coalescence. + * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. + */ +static enum sci_status scic_controller_set_interrupt_coalescence( + struct scic_sds_controller *scic_controller, + u32 coalesce_number, + u32 coalesce_timeout) +{ + u8 timeout_encode = 0; + u32 min = 0; + u32 max = 0; + + /* Check if the input parameters fall in the range. */ + if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + /* + * Defined encoding for interrupt coalescing timeout: + * Value Min Max Units + * ----- --- --- ----- + * 0 - - Disabled + * 1 13.3 20.0 ns + * 2 26.7 40.0 + * 3 53.3 80.0 + * 4 106.7 160.0 + * 5 213.3 320.0 + * 6 426.7 640.0 + * 7 853.3 1280.0 + * 8 1.7 2.6 us + * 9 3.4 5.1 + * 10 6.8 10.2 + * 11 13.7 20.5 + * 12 27.3 41.0 + * 13 54.6 81.9 + * 14 109.2 163.8 + * 15 218.5 327.7 + * 16 436.9 655.4 + * 17 873.8 1310.7 + * 18 1.7 2.6 ms + * 19 3.5 5.2 + * 20 7.0 10.5 + * 21 14.0 21.0 + * 22 28.0 41.9 + * 23 55.9 83.9 + * 24 111.8 167.8 + * 25 223.7 335.5 + * 26 447.4 671.1 + * 27 894.8 1342.2 + * 28 1.8 2.7 s + * Others Undefined */ + + /* + * Use the table above to decide the encode of interrupt coalescing timeout + * value for register writing. */ + if (coalesce_timeout == 0) + timeout_encode = 0; + else{ + /* make the timeout value in unit of (10 ns). */ + coalesce_timeout = coalesce_timeout * 100; + min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10; + max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10; + + /* get the encode of timeout for register writing. */ + for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN; + timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX; + timeout_encode++) { + if (min <= coalesce_timeout && max > coalesce_timeout) + break; + else if (coalesce_timeout >= max && coalesce_timeout < min * 2 + && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) { + if ((coalesce_timeout - max) < (2 * min - coalesce_timeout)) + break; + else{ + timeout_encode++; + break; + } + } else { + max = max * 2; + min = min * 2; + } + } + + if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1) + /* the value is out of range. */ + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | + SMU_ICC_GEN_VAL(TIMER, timeout_encode), + &scic_controller->smu_registers->interrupt_coalesce_control); + + + scic_controller->interrupt_coalesce_number = (u16)coalesce_number; + scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100; + + return SCI_SUCCESS; +} + + +static void scic_sds_controller_ready_state_enter(void *object) +{ + struct scic_sds_controller *scic = object; + + /* set the default interrupt coalescence number and timeout value. */ + scic_controller_set_interrupt_coalescence(scic, 0x10, 250); +} + +static void scic_sds_controller_ready_state_exit(void *object) +{ + struct scic_sds_controller *scic = object; + + /* disable interrupt coalescence. */ + scic_controller_set_interrupt_coalescence(scic, 0, 0); +} + +static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller *scic) +{ + u32 index; + enum sci_status status; + enum sci_status phy_status; + struct isci_host *ihost = scic_to_ihost(scic); + + status = SCI_SUCCESS; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + phy_status = scic_sds_phy_stop(&ihost->phys[index].sci); + + if (phy_status != SCI_SUCCESS && + phy_status != SCI_FAILURE_INVALID_STATE) { + status = SCI_FAILURE; + + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed to stop " + "phy %d because of status %d.\n", + __func__, + ihost->phys[index].sci.phy_index, phy_status); + } + } + + return status; +} + +static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) +{ + u32 index; + enum sci_status port_status; + enum sci_status status = SCI_SUCCESS; + struct isci_host *ihost = scic_to_ihost(scic); + + for (index = 0; index < scic->logical_port_entries; index++) { + struct scic_sds_port *sci_port = &ihost->ports[index].sci; + scic_sds_port_handler_t stop; + + stop = sci_port->state_handlers->stop_handler; + port_status = stop(sci_port); + + if ((port_status != SCI_SUCCESS) && + (port_status != SCI_FAILURE_INVALID_STATE)) { + status = SCI_FAILURE; + + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed to " + "stop port %d because of status %d.\n", + __func__, + sci_port->logical_port_index, + port_status); + } + } + + return status; +} + +static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controller *scic) +{ + u32 index; + enum sci_status status; + enum sci_status device_status; + + status = SCI_SUCCESS; + + for (index = 0; index < scic->remote_node_entries; index++) { + if (scic->device_table[index] != NULL) { + /* / @todo What timeout value do we want to provide to this request? */ + device_status = scic_remote_device_stop(scic->device_table[index], 0); + + if ((device_status != SCI_SUCCESS) && + (device_status != SCI_FAILURE_INVALID_STATE)) { + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed " + "to stop device 0x%p because of " + "status %d.\n", + __func__, + scic->device_table[index], device_status); + } + } + } + + return status; +} + +static void scic_sds_controller_stopping_state_enter(void *object) +{ + struct scic_sds_controller *scic = object; + + /* Stop all of the components for this controller */ + scic_sds_controller_stop_phys(scic); + scic_sds_controller_stop_ports(scic); + scic_sds_controller_stop_devices(scic); +} + +static void scic_sds_controller_stopping_state_exit(void *object) +{ + struct scic_sds_controller *scic = object; + + isci_timer_stop(scic->timeout_timer); +} + + +/** + * scic_sds_controller_reset_hardware() - + * + * This method will reset the controller hardware. + */ +static void scic_sds_controller_reset_hardware(struct scic_sds_controller *scic) +{ + /* Disable interrupts so we dont take any spurious interrupts */ + scic_controller_disable_interrupts(scic); + + /* Reset the SCU */ + writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control); + + /* Delay for 1ms to before clearing the CQP and UFQPR. */ + udelay(1000); + + /* The write to the CQGR clears the CQP */ + writel(0x00000000, &scic->smu_registers->completion_queue_get); + + /* The write to the UFQGP clears the UFQPR */ + writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer); +} + +static void scic_sds_controller_resetting_state_enter(void *object) +{ + struct scic_sds_controller *scic = object; + + scic_sds_controller_reset_hardware(scic); + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_RESET); +} + +static const struct sci_base_state scic_sds_controller_state_table[] = { + [SCI_BASE_CONTROLLER_STATE_INITIAL] = { + .enter_state = scic_sds_controller_initial_state_enter, + }, + [SCI_BASE_CONTROLLER_STATE_RESET] = {}, + [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = {}, + [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = {}, + [SCI_BASE_CONTROLLER_STATE_STARTING] = { + .exit_state = scic_sds_controller_starting_state_exit, + }, + [SCI_BASE_CONTROLLER_STATE_READY] = { + .enter_state = scic_sds_controller_ready_state_enter, + .exit_state = scic_sds_controller_ready_state_exit, + }, + [SCI_BASE_CONTROLLER_STATE_RESETTING] = { + .enter_state = scic_sds_controller_resetting_state_enter, + }, + [SCI_BASE_CONTROLLER_STATE_STOPPING] = { + .enter_state = scic_sds_controller_stopping_state_enter, + .exit_state = scic_sds_controller_stopping_state_exit, + }, + [SCI_BASE_CONTROLLER_STATE_STOPPED] = {}, + [SCI_BASE_CONTROLLER_STATE_FAILED] = {} +}; + +static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) +{ + /* these defaults are overridden by the platform / firmware */ + struct isci_host *ihost = scic_to_ihost(scic); + u16 index; + + /* Default to APC mode. */ + scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; + + /* Default to APC mode. */ + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1; + + /* Default to no SSC operation. */ + scic->oem_parameters.sds1.controller.do_enable_ssc = false; + + /* Initialize all of the port parameter information to narrow ports. */ + for (index = 0; index < SCI_MAX_PORTS; index++) { + scic->oem_parameters.sds1.ports[index].phy_mask = 0; + } + + /* Initialize all of the phy parameter information. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* Default to 6G (i.e. Gen 3) for now. */ + scic->user_parameters.sds1.phys[index].max_speed_generation = 3; + + /* the frequencies cannot be 0 */ + scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f; + scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff; + scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; + + /* + * Previous Vitesse based expanders had a arbitration issue that + * is worked around by having the upper 32-bits of SAS address + * with a value greater then the Vitesse company identifier. + * Hence, usage of 0x5FCFFFFF. */ + scic->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id; + scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF; + } + + scic->user_parameters.sds1.stp_inactivity_timeout = 5; + scic->user_parameters.sds1.ssp_inactivity_timeout = 5; + scic->user_parameters.sds1.stp_max_occupancy_timeout = 5; + scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20; + scic->user_parameters.sds1.no_outbound_task_timeout = 20; +} + + + +/** + * scic_controller_construct() - This method will attempt to construct a + * controller object utilizing the supplied parameter information. + * @c: This parameter specifies the controller to be constructed. + * @scu_base: mapped base address of the scu registers + * @smu_base: mapped base address of the smu registers + * + * Indicate if the controller was successfully constructed or if it failed in + * some way. SCI_SUCCESS This value is returned if the controller was + * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned + * if the interrupt coalescence timer may cause SAS compliance issues for SMP + * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE + * This value is returned if the controller does not support the supplied type. + * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the + * controller does not support the supplied initialization data version. + */ +static enum sci_status scic_controller_construct(struct scic_sds_controller *scic, + void __iomem *scu_base, + void __iomem *smu_base) +{ + struct isci_host *ihost = scic_to_ihost(scic); + u8 i; + + sci_base_state_machine_construct(&scic->state_machine, + scic, scic_sds_controller_state_table, + SCI_BASE_CONTROLLER_STATE_INITIAL); + + sci_base_state_machine_start(&scic->state_machine); + + scic->scu_registers = scu_base; + scic->smu_registers = smu_base; + + scic_sds_port_configuration_agent_construct(&scic->port_agent); + + /* Construct the ports for this controller */ + for (i = 0; i < SCI_MAX_PORTS; i++) + scic_sds_port_construct(&ihost->ports[i].sci, i, scic); + scic_sds_port_construct(&ihost->ports[i].sci, SCIC_SDS_DUMMY_PORT, scic); + + /* Construct the phys for this controller */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + /* Add all the PHYs to the dummy port */ + scic_sds_phy_construct(&ihost->phys[i].sci, + &ihost->ports[SCI_MAX_PORTS].sci, i); + } + + scic->invalid_phy_mask = 0; + + /* Set the default maximum values */ + scic->completion_event_entries = SCU_EVENT_COUNT; + scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; + scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; + scic->logical_port_entries = SCI_MAX_PORTS; + scic->task_context_entries = SCU_IO_REQUEST_COUNT; + scic->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT; + scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT; + + /* Initialize the User and OEM parameters to default values. */ + scic_sds_controller_set_default_config_parameters(scic); + + return scic_controller_reset(scic); +} + +int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) +{ + int i; + + for (i = 0; i < SCI_MAX_PORTS; i++) + if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) + return -EINVAL; + + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->phys[i].sas_address.high == 0 && + oem->phys[i].sas_address.low == 0) + return -EINVAL; + + if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->ports[i].phy_mask != 0) + return -EINVAL; + } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + u8 phy_mask = 0; + + for (i = 0; i < SCI_MAX_PHYS; i++) + phy_mask |= oem->ports[i].phy_mask; + + if (phy_mask == 0) + return -EINVAL; + } else + return -EINVAL; + + if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) + return -EINVAL; + + return 0; +} + +static enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic, + union scic_oem_parameters *scic_parms) +{ + u32 state = scic->state_machine.current_state_id; + + if (state == SCI_BASE_CONTROLLER_STATE_RESET || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + + if (scic_oem_parameters_validate(&scic_parms->sds1)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + scic->oem_parameters.sds1 = scic_parms->sds1; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +void scic_oem_parameters_get( + struct scic_sds_controller *scic, + union scic_oem_parameters *scic_parms) +{ + memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms)); +} + +static void scic_sds_controller_timeout_handler(void *_scic) +{ + struct scic_sds_controller *scic = _scic; + struct isci_host *ihost = scic_to_ihost(scic); + struct sci_base_state_machine *sm = &scic->state_machine; + + if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) + scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); + else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) { + sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED); + isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); + } else /* / @todo Now what do we want to do in this case? */ + dev_err(scic_to_dev(scic), + "%s: Controller timer fired when controller was not " + "in a state being timed.\n", + __func__); +} + +static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic) +{ + struct isci_host *ihost = scic_to_ihost(scic); + + scic->phy_startup_timer = isci_timer_create(ihost, + scic, + scic_sds_controller_phy_startup_timeout_handler); + + if (scic->phy_startup_timer == NULL) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + else { + scic->next_phy_to_start = 0; + scic->phy_startup_timer_pending = false; + } + + return SCI_SUCCESS; +} + +static void scic_sds_controller_power_control_timer_start(struct scic_sds_controller *scic) +{ + isci_timer_start(scic->power_control.timer, + SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); + + scic->power_control.timer_started = true; +} + +static void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic) +{ + if (scic->power_control.timer_started) { + isci_timer_stop(scic->power_control.timer); + scic->power_control.timer_started = false; + } +} + +static void scic_sds_controller_power_control_timer_restart(struct scic_sds_controller *scic) +{ + scic_sds_controller_power_control_timer_stop(scic); + scic_sds_controller_power_control_timer_start(scic); +} + +static void scic_sds_controller_power_control_timer_handler( + void *controller) +{ + struct scic_sds_controller *scic; + + scic = (struct scic_sds_controller *)controller; + + scic->power_control.phys_granted_power = 0; + + if (scic->power_control.phys_waiting == 0) { + scic->power_control.timer_started = false; + } else { + struct scic_sds_phy *sci_phy = NULL; + u8 i; + + for (i = 0; + (i < SCI_MAX_PHYS) + && (scic->power_control.phys_waiting != 0); + i++) { + if (scic->power_control.requesters[i] != NULL) { + if (scic->power_control.phys_granted_power < + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + sci_phy = scic->power_control.requesters[i]; + scic->power_control.requesters[i] = NULL; + scic->power_control.phys_waiting--; + scic->power_control.phys_granted_power++; + scic_sds_phy_consume_power_handler(sci_phy); + } else { + break; + } + } + } + + /* + * It doesn't matter if the power list is empty, we need to start the + * timer in case another phy becomes ready. + */ + scic_sds_controller_power_control_timer_start(scic); + } +} + +/** + * This method inserts the phy in the stagger spinup control queue. + * @scic: + * + * + */ +void scic_sds_controller_power_control_queue_insert( + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy) +{ + BUG_ON(sci_phy == NULL); + + if (scic->power_control.phys_granted_power < + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + scic->power_control.phys_granted_power++; + scic_sds_phy_consume_power_handler(sci_phy); + + /* + * stop and start the power_control timer. When the timer fires, the + * no_of_phys_granted_power will be set to 0 + */ + scic_sds_controller_power_control_timer_restart(scic); + } else { + /* Add the phy in the waiting list */ + scic->power_control.requesters[sci_phy->phy_index] = sci_phy; + scic->power_control.phys_waiting++; + } +} + +/** + * This method removes the phy from the stagger spinup control queue. + * @scic: + * + * + */ +void scic_sds_controller_power_control_queue_remove( + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy) +{ + BUG_ON(sci_phy == NULL); + + if (scic->power_control.requesters[sci_phy->phy_index] != NULL) { + scic->power_control.phys_waiting--; + } + + scic->power_control.requesters[sci_phy->phy_index] = NULL; +} + +#define AFE_REGISTER_WRITE_DELAY 10 + +/* Initialize the AFE for this phy index. We need to read the AFE setup from + * the OEM parameters + */ +static void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) +{ + const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; + u32 afe_status; + u32 phy_id; + + /* Clear DFX Status registers */ + writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + if (is_b0()) { + /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement + * Timer, PM Stagger Timer */ + writel(0x0007BFFF, &scic->scu_registers->afe.afe_pmsn_master_control2); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* Configure bias currents to normal */ + if (is_a0()) + writel(0x00005500, &scic->scu_registers->afe.afe_bias_control); + else if (is_a2()) + writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control); + else if (is_b0()) + writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control); + + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Enable PLL */ + if (is_b0()) + writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0); + else + writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0); + + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Wait for the PLL to lock */ + do { + afe_status = readl(&scic->scu_registers->afe.afe_common_block_status); + udelay(AFE_REGISTER_WRITE_DELAY); + } while ((afe_status & 0x00001000) == 0); + + if (is_a0() || is_a2()) { + /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ + writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { + const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; + + if (is_b0()) { + /* Configure transmitter SSC parameters */ + writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + udelay(AFE_REGISTER_WRITE_DELAY); + } else { + /* + * All defaults, except the Receive Word Alignament/Comma Detect + * Enable....(0xe800) */ + writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + if (is_a0()) + writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + else if (is_a2()) + writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + else { + /* Power down TX and RX (PWRDNTX and PWRDNRX) */ + writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + } + udelay(AFE_REGISTER_WRITE_DELAY); + + if (is_a0() || is_a2()) { + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* + * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), + * RDD=0x0(RX Detect Enabled) ....(0xe800) */ + writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Leave DFE/FFE on */ + if (is_a0()) + writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + else if (is_a2()) + writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + else { + writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + } + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control0, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control1, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control2, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control3, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* Transfer control to the PEs */ + writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); +} + +static enum sci_status scic_controller_set_mode(struct scic_sds_controller *scic, + enum sci_controller_mode operating_mode) +{ + enum sci_status status = SCI_SUCCESS; + + if ((scic->state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_INITIALIZING) || + (scic->state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_INITIALIZED)) { + switch (operating_mode) { + case SCI_MODE_SPEED: + scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; + scic->task_context_entries = SCU_IO_REQUEST_COUNT; + scic->uf_control.buffers.count = + SCU_UNSOLICITED_FRAME_COUNT; + scic->completion_event_entries = SCU_EVENT_COUNT; + scic->completion_queue_entries = + SCU_COMPLETION_QUEUE_COUNT; + break; + + case SCI_MODE_SIZE: + scic->remote_node_entries = SCI_MIN_REMOTE_DEVICES; + scic->task_context_entries = SCI_MIN_IO_REQUESTS; + scic->uf_control.buffers.count = + SCU_MIN_UNSOLICITED_FRAMES; + scic->completion_event_entries = SCU_MIN_EVENTS; + scic->completion_queue_entries = + SCU_MIN_COMPLETION_QUEUE_ENTRIES; + break; + + default: + status = SCI_FAILURE_INVALID_PARAMETER_VALUE; + break; + } + } else + status = SCI_FAILURE_INVALID_STATE; + + return status; +} + +static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) +{ + struct isci_host *ihost = scic_to_ihost(scic); + scic->power_control.timer = isci_timer_create(ihost, + scic, + scic_sds_controller_power_control_timer_handler); + + memset(scic->power_control.requesters, 0, + sizeof(scic->power_control.requesters)); + + scic->power_control.phys_waiting = 0; + scic->power_control.phys_granted_power = 0; +} + +static enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) +{ + struct sci_base_state_machine *sm = &scic->state_machine; + enum sci_status result = SCI_SUCCESS; + struct isci_host *ihost = scic_to_ihost(scic); + u32 index, state; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_RESET) { + dev_warn(scic_to_dev(scic), + "SCIC Controller initialize operation requested " + "in invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); + + scic->timeout_timer = isci_timer_create(ihost, scic, + scic_sds_controller_timeout_handler); + + scic_sds_controller_initialize_phy_startup(scic); + + scic_sds_controller_initialize_power_control(scic); + + /* + * There is nothing to do here for B0 since we do not have to + * program the AFE registers. + * / @todo The AFE settings are supposed to be correct for the B0 but + * / presently they seem to be wrong. */ + scic_sds_controller_afe_initialization(scic); + + if (result == SCI_SUCCESS) { + u32 status; + u32 terminate_loop; + + /* Take the hardware out of reset */ + writel(0, &scic->smu_registers->soft_reset_control); + + /* + * / @todo Provide meaningfull error code for hardware failure + * result = SCI_FAILURE_CONTROLLER_HARDWARE; */ + result = SCI_FAILURE; + terminate_loop = 100; + + while (terminate_loop-- && (result != SCI_SUCCESS)) { + /* Loop until the hardware reports success */ + udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); + status = readl(&scic->smu_registers->control_status); + + if ((status & SCU_RAM_INIT_COMPLETED) == + SCU_RAM_INIT_COMPLETED) + result = SCI_SUCCESS; + } + } + + if (result == SCI_SUCCESS) { + u32 max_supported_ports; + u32 max_supported_devices; + u32 max_supported_io_requests; + u32 device_context_capacity; + + /* + * Determine what are the actaul device capacities that the + * hardware will support */ + device_context_capacity = + readl(&scic->smu_registers->device_context_capacity); + + + max_supported_ports = smu_dcc_get_max_ports(device_context_capacity); + max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity); + max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity); + + /* + * Make all PEs that are unassigned match up with the + * logical ports + */ + for (index = 0; index < max_supported_ports; index++) { + struct scu_port_task_scheduler_group_registers __iomem + *ptsg = &scic->scu_registers->peg0.ptsg; + + writel(index, &ptsg->protocol_engine[index]); + } + + /* Record the smaller of the two capacity values */ + scic->logical_port_entries = + min(max_supported_ports, scic->logical_port_entries); + + scic->task_context_entries = + min(max_supported_io_requests, + scic->task_context_entries); + + scic->remote_node_entries = + min(max_supported_devices, scic->remote_node_entries); + + /* + * Now that we have the correct hardware reported minimum values + * build the MDL for the controller. Default to a performance + * configuration. + */ + scic_controller_set_mode(scic, SCI_MODE_SPEED); + } + + /* Initialize hardware PCI Relaxed ordering in DMA engines */ + if (result == SCI_SUCCESS) { + u32 dma_configuration; + + /* Configure the payload DMA */ + dma_configuration = + readl(&scic->scu_registers->sdma.pdma_configuration); + dma_configuration |= + SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(dma_configuration, + &scic->scu_registers->sdma.pdma_configuration); + + /* Configure the control DMA */ + dma_configuration = + readl(&scic->scu_registers->sdma.cdma_configuration); + dma_configuration |= + SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(dma_configuration, + &scic->scu_registers->sdma.cdma_configuration); + } + + /* + * Initialize the PHYs before the PORTs because the PHY registers + * are accessed during the port initialization. + */ + if (result == SCI_SUCCESS) { + /* Initialize the phys */ + for (index = 0; + (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS); + index++) { + result = scic_sds_phy_initialize( + &ihost->phys[index].sci, + &scic->scu_registers->peg0.pe[index].tl, + &scic->scu_registers->peg0.pe[index].ll); + } + } + + if (result == SCI_SUCCESS) { + /* Initialize the logical ports */ + for (index = 0; + (index < scic->logical_port_entries) && + (result == SCI_SUCCESS); + index++) { + result = scic_sds_port_initialize( + &ihost->ports[index].sci, + &scic->scu_registers->peg0.ptsg.port[index], + &scic->scu_registers->peg0.ptsg.protocol_engine, + &scic->scu_registers->peg0.viit[index]); + } + } + + if (result == SCI_SUCCESS) + result = scic_sds_port_configuration_agent_initialize( + scic, + &scic->port_agent); + + /* Advance the controller state machine */ + if (result == SCI_SUCCESS) + state = SCI_BASE_CONTROLLER_STATE_INITIALIZED; + else + state = SCI_BASE_CONTROLLER_STATE_FAILED; + sci_base_state_machine_change_state(sm, state); + + return result; +} + +static enum sci_status scic_user_parameters_set( + struct scic_sds_controller *scic, + union scic_user_parameters *scic_parms) +{ + u32 state = scic->state_machine.current_state_id; + + if (state == SCI_BASE_CONTROLLER_STATE_RESET || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + u16 index; + + /* + * Validate the user parameters. If they are not legal, then + * return a failure. + */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct sci_phy_user_params *user_phy; + + user_phy = &scic_parms->sds1.phys[index]; + + if (!((user_phy->max_speed_generation <= + SCIC_SDS_PARM_MAX_SPEED) && + (user_phy->max_speed_generation > + SCIC_SDS_PARM_NO_SPEED))) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + if (user_phy->in_connection_align_insertion_frequency < + 3) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + if ((user_phy->in_connection_align_insertion_frequency < + 3) || + (user_phy->align_insertion_frequency == 0) || + (user_phy-> + notify_enable_spin_up_insertion_frequency == + 0)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + if ((scic_parms->sds1.stp_inactivity_timeout == 0) || + (scic_parms->sds1.ssp_inactivity_timeout == 0) || + (scic_parms->sds1.stp_max_occupancy_timeout == 0) || + (scic_parms->sds1.ssp_max_occupancy_timeout == 0) || + (scic_parms->sds1.no_outbound_task_timeout == 0)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms)); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +static int scic_controller_mem_init(struct scic_sds_controller *scic) +{ + struct device *dev = scic_to_dev(scic); + dma_addr_t dma_handle; + enum sci_status result; + + scic->completion_queue = dmam_alloc_coherent(dev, + scic->completion_queue_entries * sizeof(u32), + &dma_handle, GFP_KERNEL); + if (!scic->completion_queue) + return -ENOMEM; + + writel(lower_32_bits(dma_handle), + &scic->smu_registers->completion_queue_lower); + writel(upper_32_bits(dma_handle), + &scic->smu_registers->completion_queue_upper); + + scic->remote_node_context_table = dmam_alloc_coherent(dev, + scic->remote_node_entries * + sizeof(union scu_remote_node_context), + &dma_handle, GFP_KERNEL); + if (!scic->remote_node_context_table) + return -ENOMEM; + + writel(lower_32_bits(dma_handle), + &scic->smu_registers->remote_node_context_lower); + writel(upper_32_bits(dma_handle), + &scic->smu_registers->remote_node_context_upper); + + scic->task_context_table = dmam_alloc_coherent(dev, + scic->task_context_entries * + sizeof(struct scu_task_context), + &dma_handle, GFP_KERNEL); + if (!scic->task_context_table) + return -ENOMEM; + + writel(lower_32_bits(dma_handle), + &scic->smu_registers->host_task_table_lower); + writel(upper_32_bits(dma_handle), + &scic->smu_registers->host_task_table_upper); + + result = scic_sds_unsolicited_frame_control_construct(scic); + if (result) + return result; + + /* + * Inform the silicon as to the location of the UF headers and + * address table. + */ + writel(lower_32_bits(scic->uf_control.headers.physical_address), + &scic->scu_registers->sdma.uf_header_base_address_lower); + writel(upper_32_bits(scic->uf_control.headers.physical_address), + &scic->scu_registers->sdma.uf_header_base_address_upper); + + writel(lower_32_bits(scic->uf_control.address_table.physical_address), + &scic->scu_registers->sdma.uf_address_table_lower); + writel(upper_32_bits(scic->uf_control.address_table.physical_address), + &scic->scu_registers->sdma.uf_address_table_upper); + + return 0; +} + int isci_host_init(struct isci_host *isci_host) { int err = 0, i; @@ -453,3 +2600,625 @@ int isci_host_init(struct isci_host *isci_host) return 0; } + +void scic_sds_controller_link_up(struct scic_sds_controller *scic, + struct scic_sds_port *port, struct scic_sds_phy *phy) +{ + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_STARTING: + scic_sds_controller_phy_timer_stop(scic); + scic->port_agent.link_up_handler(scic, &scic->port_agent, + port, phy); + scic_sds_controller_start_next_phy(scic); + break; + case SCI_BASE_CONTROLLER_STATE_READY: + scic->port_agent.link_up_handler(scic, &scic->port_agent, + port, phy); + break; + default: + dev_dbg(scic_to_dev(scic), + "%s: SCIC Controller linkup event from phy %d in " + "unexpected state %d\n", __func__, phy->phy_index, + scic->state_machine.current_state_id); + } +} + +void scic_sds_controller_link_down(struct scic_sds_controller *scic, + struct scic_sds_port *port, struct scic_sds_phy *phy) +{ + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_STARTING: + case SCI_BASE_CONTROLLER_STATE_READY: + scic->port_agent.link_down_handler(scic, &scic->port_agent, + port, phy); + break; + default: + dev_dbg(scic_to_dev(scic), + "%s: SCIC Controller linkdown event from phy %d in " + "unexpected state %d\n", + __func__, + phy->phy_index, + scic->state_machine.current_state_id); + } +} + +/** + * This is a helper method to determine if any remote devices on this + * controller are still in the stopping state. + * + */ +static bool scic_sds_controller_has_remote_devices_stopping( + struct scic_sds_controller *controller) +{ + u32 index; + + for (index = 0; index < controller->remote_node_entries; index++) { + if ((controller->device_table[index] != NULL) && + (controller->device_table[index]->state_machine.current_state_id + == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)) + return true; + } + + return false; +} + +/** + * This method is called by the remote device to inform the controller + * object that the remote device has stopped. + */ +void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev) +{ + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_STOPPING) { + dev_dbg(scic_to_dev(scic), + "SCIC Controller 0x%p remote device stopped event " + "from device 0x%p in unexpected state %d\n", + scic, sci_dev, + scic->state_machine.current_state_id); + return; + } + + if (!scic_sds_controller_has_remote_devices_stopping(scic)) { + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STOPPED); + } +} + +/** + * This method will write to the SCU PCP register the request value. The method + * is used to suspend/resume ports, devices, and phys. + * @scic: + * + * + */ +void scic_sds_controller_post_request( + struct scic_sds_controller *scic, + u32 request) +{ + dev_dbg(scic_to_dev(scic), + "%s: SCIC Controller 0x%p post request 0x%08x\n", + __func__, + scic, + request); + + writel(request, &scic->smu_registers->post_context_port); +} + +/** + * This method will copy the soft copy of the task context into the physical + * memory accessible by the controller. + * @scic: This parameter specifies the controller for which to copy + * the task context. + * @sci_req: This parameter specifies the request for which the task + * context is being copied. + * + * After this call is made the SCIC_SDS_IO_REQUEST object will always point to + * the physical memory version of the task context. Thus, all subsequent + * updates to the task context are performed in the TC table (i.e. DMAable + * memory). none + */ +void scic_sds_controller_copy_task_context( + struct scic_sds_controller *scic, + struct scic_sds_request *sci_req) +{ + struct scu_task_context *task_context_buffer; + + task_context_buffer = scic_sds_controller_get_task_context_buffer( + scic, sci_req->io_tag); + + memcpy(task_context_buffer, + sci_req->task_context_buffer, + offsetof(struct scu_task_context, sgl_snapshot_ac)); + + /* + * Now that the soft copy of the TC has been copied into the TC + * table accessible by the silicon. Thus, any further changes to + * the TC (e.g. TC termination) occur in the appropriate location. */ + sci_req->task_context_buffer = task_context_buffer; +} + +/** + * This method returns the task context buffer for the given io tag. + * @scic: + * @io_tag: + * + * struct scu_task_context* + */ +struct scu_task_context *scic_sds_controller_get_task_context_buffer( + struct scic_sds_controller *scic, + u16 io_tag + ) { + u16 task_index = scic_sds_io_tag_get_index(io_tag); + + if (task_index < scic->task_context_entries) { + return &scic->task_context_table[task_index]; + } + + return NULL; +} + +struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, + u16 io_tag) +{ + u16 task_index; + u16 task_sequence; + + task_index = scic_sds_io_tag_get_index(io_tag); + + if (task_index < scic->task_context_entries) { + if (scic->io_request_table[task_index] != NULL) { + task_sequence = scic_sds_io_tag_get_sequence(io_tag); + + if (task_sequence == scic->io_request_sequence[task_index]) { + return scic->io_request_table[task_index]; + } + } + } + + return NULL; +} + +/** + * This method allocates remote node index and the reserves the remote node + * context space for use. This method can fail if there are no more remote + * node index available. + * @scic: This is the controller object which contains the set of + * free remote node ids + * @sci_dev: This is the device object which is requesting the a remote node + * id + * @node_id: This is the remote node id that is assinged to the device if one + * is available + * + * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote + * node index available. + */ +enum sci_status scic_sds_controller_allocate_remote_node_context( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 *node_id) +{ + u16 node_index; + u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); + + node_index = scic_sds_remote_node_table_allocate_remote_node( + &scic->available_remote_nodes, remote_node_count + ); + + if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + scic->device_table[node_index] = sci_dev; + + *node_id = node_index; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INSUFFICIENT_RESOURCES; +} + +/** + * This method frees the remote node index back to the available pool. Once + * this is done the remote node context buffer is no longer valid and can + * not be used. + * @scic: + * @sci_dev: + * @node_id: + * + */ +void scic_sds_controller_free_remote_node_context( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 node_id) +{ + u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); + + if (scic->device_table[node_id] == sci_dev) { + scic->device_table[node_id] = NULL; + + scic_sds_remote_node_table_release_remote_node_index( + &scic->available_remote_nodes, remote_node_count, node_id + ); + } +} + +/** + * This method returns the union scu_remote_node_context for the specified remote + * node id. + * @scic: + * @node_id: + * + * union scu_remote_node_context* + */ +union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( + struct scic_sds_controller *scic, + u16 node_id + ) { + if ( + (node_id < scic->remote_node_entries) + && (scic->device_table[node_id] != NULL) + ) { + return &scic->remote_node_context_table[node_id]; + } + + return NULL; +} + +/** + * + * @resposne_buffer: This is the buffer into which the D2H register FIS will be + * constructed. + * @frame_header: This is the frame header returned by the hardware. + * @frame_buffer: This is the frame buffer returned by the hardware. + * + * This method will combind the frame header and frame buffer to create a SATA + * D2H register FIS none + */ +void scic_sds_controller_copy_sata_response( + void *response_buffer, + void *frame_header, + void *frame_buffer) +{ + memcpy(response_buffer, frame_header, sizeof(u32)); + + memcpy(response_buffer + sizeof(u32), + frame_buffer, + sizeof(struct dev_to_host_fis) - sizeof(u32)); +} + +/** + * This method releases the frame once this is done the frame is available for + * re-use by the hardware. The data contained in the frame header and frame + * buffer is no longer valid. The UF queue get pointer is only updated if UF + * control indicates this is appropriate. + * @scic: + * @frame_index: + * + */ +void scic_sds_controller_release_frame( + struct scic_sds_controller *scic, + u32 frame_index) +{ + if (scic_sds_unsolicited_frame_control_release_frame( + &scic->uf_control, frame_index) == true) + writel(scic->uf_control.get, + &scic->scu_registers->sdma.unsolicited_frame_get_pointer); +} + +/** + * scic_controller_start_io() - This method is called by the SCI user to + * send/start an IO request. If the method invocation is successful, then + * the IO request has been queued to the hardware for processing. + * @controller: the handle to the controller object for which to start an IO + * request. + * @remote_device: the handle to the remote device object for which to start an + * IO request. + * @io_request: the handle to the io request object to start. + * @io_tag: This parameter specifies a previously allocated IO tag that the + * user desires to be utilized for this request. This parameter is optional. + * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value + * for this parameter. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a + * result, it is expected the user will have set the NCQ tag field in the host + * to device register FIS prior to calling this method. There is also a + * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking + * the scic_controller_start_io() method. scic_controller_allocate_tag() for + * more information on allocating a tag. Indicate if the controller + * successfully started the IO request. SCI_SUCCESS if the IO request was + * successfully started. Determine the failure situations and return values. + */ +enum sci_status scic_controller_start_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req, + u16 io_tag) +{ + enum sci_status status; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), "invalid state to start I/O"); + return SCI_FAILURE_INVALID_STATE; + } + + status = scic_sds_remote_device_start_io(scic, rdev, req); + if (status != SCI_SUCCESS) + return status; + + scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); + return SCI_SUCCESS; +} + +/** + * scic_controller_terminate_request() - This method is called by the SCI Core + * user to terminate an ongoing (i.e. started) core IO request. This does + * not abort the IO request at the target, but rather removes the IO request + * from the host controller. + * @controller: the handle to the controller object for which to terminate a + * request. + * @remote_device: the handle to the remote device object for which to + * terminate a request. + * @request: the handle to the io or task management request object to + * terminate. + * + * Indicate if the controller successfully began the terminate process for the + * IO request. SCI_SUCCESS if the terminate process was successfully started + * for the request. Determine the failure situations and return values. + */ +enum sci_status scic_controller_terminate_request( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req) +{ + enum sci_status status; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), + "invalid state to terminate request\n"); + return SCI_FAILURE_INVALID_STATE; + } + + status = scic_sds_io_request_terminate(req); + if (status != SCI_SUCCESS) + return status; + + /* + * Utilize the original post context command and or in the POST_TC_ABORT + * request sub-type. + */ + scic_sds_controller_post_request(scic, + scic_sds_request_get_post_context(req) | + SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); + return SCI_SUCCESS; +} + +/** + * scic_controller_complete_io() - This method will perform core specific + * completion operations for an IO request. After this method is invoked, + * the user should consider the IO request as invalid until it is properly + * reused (i.e. re-constructed). + * @controller: The handle to the controller object for which to complete the + * IO request. + * @remote_device: The handle to the remote device object for which to complete + * the IO request. + * @io_request: the handle to the io request object to complete. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI + * Core user, using the scic_controller_allocate_io_tag() method, then it is + * the responsibility of the caller to invoke the scic_controller_free_io_tag() + * method to free the tag (i.e. this method will not free the IO tag). Indicate + * if the controller successfully completed the IO request. SCI_SUCCESS if the + * completion process was successful. + */ +enum sci_status scic_controller_complete_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *request) +{ + enum sci_status status; + u16 index; + + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_STOPPING: + /* XXX: Implement this function */ + return SCI_FAILURE; + case SCI_BASE_CONTROLLER_STATE_READY: + status = scic_sds_remote_device_complete_io(scic, rdev, request); + if (status != SCI_SUCCESS) + return status; + + index = scic_sds_io_tag_get_index(request->io_tag); + scic->io_request_table[index] = NULL; + return SCI_SUCCESS; + default: + dev_warn(scic_to_dev(scic), "invalid state to complete I/O"); + return SCI_FAILURE_INVALID_STATE; + } + +} + +enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), "invalid state to continue I/O"); + return SCI_FAILURE_INVALID_STATE; + } + + scic->io_request_table[scic_sds_io_tag_get_index(sci_req->io_tag)] = sci_req; + scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req)); + return SCI_SUCCESS; +} + +/** + * scic_controller_start_task() - This method is called by the SCIC user to + * send/start a framework task management request. + * @controller: the handle to the controller object for which to start the task + * management request. + * @remote_device: the handle to the remote device object for which to start + * the task management request. + * @task_request: the handle to the task request object to start. + * @io_tag: This parameter specifies a previously allocated IO tag that the + * user desires to be utilized for this request. Note this not the io_tag + * of the request being managed. It is to be utilized for the task request + * itself. This parameter is optional. The user is allowed to supply + * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - The user must synchronize this task with completion + * queue processing. If they are not synchronized then it is possible for the + * io requests that are being managed by the task request can complete before + * starting the task request. scic_controller_allocate_tag() for more + * information on allocating a tag. Indicate if the controller successfully + * started the IO request. SCI_TASK_SUCCESS if the task request was + * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is + * returned if there is/are task(s) outstanding that require termination or + * completion before this request can succeed. + */ +enum sci_task_status scic_controller_start_task( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req, + u16 task_tag) +{ + enum sci_status status; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller starting task from invalid " + "state\n", + __func__); + return SCI_TASK_FAILURE_INVALID_STATE; + } + + status = scic_sds_remote_device_start_task(scic, rdev, req); + switch (status) { + case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: + scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + + /* + * We will let framework know this task request started successfully, + * although core is still woring on starting the request (to post tc when + * RNC is resumed.) + */ + return SCI_SUCCESS; + case SCI_SUCCESS: + scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + + scic_sds_controller_post_request(scic, + scic_sds_request_get_post_context(req)); + break; + default: + break; + } + + return status; +} + +/** + * scic_controller_allocate_io_tag() - This method will allocate a tag from the + * pool of free IO tags. Direct allocation of IO tags by the SCI Core user + * is optional. The scic_controller_start_io() method will allocate an IO + * tag if this method is not utilized and the tag is not supplied to the IO + * construct routine. Direct allocation of IO tags may provide additional + * performance improvements in environments capable of supporting this usage + * model. Additionally, direct allocation of IO tags also provides + * additional flexibility to the SCI Core user. Specifically, the user may + * retain IO tags across the lives of multiple IO requests. + * @controller: the handle to the controller object for which to allocate the + * tag. + * + * IO tags are a protected resource. It is incumbent upon the SCI Core user to + * ensure that each of the methods that may allocate or free available IO tags + * are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). An unsigned integer representing an available IO tag. + * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no + * currently available tags to be allocated. All return other values indicate a + * legitimate tag. + */ +u16 scic_controller_allocate_io_tag( + struct scic_sds_controller *scic) +{ + u16 task_context; + u16 sequence_count; + + if (!sci_pool_empty(scic->tci_pool)) { + sci_pool_get(scic->tci_pool, task_context); + + sequence_count = scic->io_request_sequence[task_context]; + + return scic_sds_io_tag_construct(sequence_count, task_context); + } + + return SCI_CONTROLLER_INVALID_IO_TAG; +} + +/** + * scic_controller_free_io_tag() - This method will free an IO tag to the pool + * of free IO tags. This method provides the SCI Core user more flexibility + * with regards to IO tags. The user may desire to keep an IO tag after an + * IO request has completed, because they plan on re-using the tag for a + * subsequent IO request. This method is only legal if the tag was + * allocated via scic_controller_allocate_io_tag(). + * @controller: This parameter specifies the handle to the controller object + * for which to free/return the tag. + * @io_tag: This parameter represents the tag to be freed to the pool of + * available tags. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI + * Core user, using the scic_controller_allocate_io_tag() method, then it is + * the responsibility of the caller to invoke this method to free the tag. This + * method returns an indication of whether the tag was successfully put back + * (freed) to the pool of available tags. SCI_SUCCESS This return value + * indicates the tag was successfully placed into the pool of available IO + * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag + * is not a valid IO tag value. + */ +enum sci_status scic_controller_free_io_tag( + struct scic_sds_controller *scic, + u16 io_tag) +{ + u16 sequence; + u16 index; + + BUG_ON(io_tag == SCI_CONTROLLER_INVALID_IO_TAG); + + sequence = scic_sds_io_tag_get_sequence(io_tag); + index = scic_sds_io_tag_get_index(io_tag); + + if (!sci_pool_full(scic->tci_pool)) { + if (sequence == scic->io_request_sequence[index]) { + scic_sds_io_sequence_increment( + scic->io_request_sequence[index]); + + sci_pool_put(scic->tci_pool, index); + + return SCI_SUCCESS; + } + } + + return SCI_FAILURE_INVALID_IO_TAG; +} + + diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 13c1c99ef294496f1641ae3df41e1549475547f2..1f542c47fb3a026de90a6862bee82501920a39c2 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -52,13 +52,258 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - #ifndef _SCI_HOST_H_ #define _SCI_HOST_H_ -#include "scic_sds_controller.h" +#include "scic_config_parameters.h" #include "remote_device.h" #include "phy.h" +#include "pool.h" +#include "sci_base_state_machine.h" +#include "remote_node_table.h" +#include "scu_registers.h" +#include "scu_unsolicited_frame.h" +#include "scic_sds_unsolicited_frame_control.h" +#include "scic_sds_port_configuration_agent.h" + +struct scic_sds_request; +struct scu_task_context; + +/** + * struct scic_power_control - + * + * This structure defines the fields for managing power control for direct + * attached disk devices. + */ +struct scic_power_control { + /** + * This field is set when the power control timer is running and cleared when + * it is not. + */ + bool timer_started; + + /** + * This field is the handle to the driver timer object. This timer is used to + * control when the directed attached disks can consume power. + */ + void *timer; + + /** + * This field is used to keep track of how many phys are put into the + * requesters field. + */ + u8 phys_waiting; + + /** + * This field is used to keep track of how many phys have been granted to consume power + */ + u8 phys_granted_power; + + /** + * This field is an array of phys that we are waiting on. The phys are direct + * mapped into requesters via struct scic_sds_phy.phy_index + */ + struct scic_sds_phy *requesters[SCI_MAX_PHYS]; + +}; + +/** + * struct scic_sds_controller - + * + * This structure represents the SCU controller object. + */ +struct scic_sds_controller { + /** + * This field contains the information for the base controller state + * machine. + */ + struct sci_base_state_machine state_machine; + + /** + * This field is the driver timer object handler used to time the controller + * object start and stop requests. + */ + void *timeout_timer; + + /** + * This field contains the user parameters to be utilized for this + * core controller object. + */ + union scic_user_parameters user_parameters; + + /** + * This field contains the OEM parameters to be utilized for this + * core controller object. + */ + union scic_oem_parameters oem_parameters; + + /** + * This field contains the port configuration agent for this controller. + */ + struct scic_sds_port_configuration_agent port_agent; + + /** + * This field is the array of device objects that are currently constructed + * for this controller object. This table is used as a fast lookup of device + * objects that need to handle device completion notifications from the + * hardware. The table is RNi based. + */ + struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; + + /** + * This field is the array of IO request objects that are currently active for + * this controller object. This table is used as a fast lookup of the io + * request object that need to handle completion queue notifications. The + * table is TCi based. + */ + struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS]; + + /** + * This field is the free RNi data structure + */ + struct scic_remote_node_table available_remote_nodes; + + /** + * This field is the TCi pool used to manage the task context index. + */ + SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS); + + /** + * This filed is the struct scic_power_control data used to controll when direct + * attached devices can consume power. + */ + struct scic_power_control power_control; + + /** + * This field is the array of sequence values for the IO Tag fields. Even + * though only 4 bits of the field is used for the sequence the sequence is 16 + * bits in size so the sequence can be bitwise or'd with the TCi to build the + * IO Tag value. + */ + u16 io_request_sequence[SCI_MAX_IO_REQUESTS]; + + /** + * This field in the array of sequence values for the RNi. These are used + * to control io request build to io request start operations. The sequence + * value is recorded into an io request when it is built and is checked on + * the io request start operation to make sure that there was not a device + * hot plug between the build and start operation. + */ + u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES]; + + /** + * This field is a pointer to the memory allocated by the driver for the task + * context table. This data is shared between the hardware and software. + */ + struct scu_task_context *task_context_table; + + /** + * This field is a pointer to the memory allocated by the driver for the + * remote node context table. This table is shared between the hardware and + * software. + */ + union scu_remote_node_context *remote_node_context_table; + + /** + * This field is a pointer to the completion queue. This memory is + * written to by the hardware and read by the software. + */ + u32 *completion_queue; + + /** + * This field is the software copy of the completion queue get pointer. The + * controller object writes this value to the hardware after processing the + * completion entries. + */ + u32 completion_queue_get; + + /** + * This field is the minimum of the number of hardware supported port entries + * and the software requested port entries. + */ + u32 logical_port_entries; + + /** + * This field is the minimum number of hardware supported completion queue + * entries and the software requested completion queue entries. + */ + u32 completion_queue_entries; + + /** + * This field is the minimum number of hardware supported event entries and + * the software requested event entries. + */ + u32 completion_event_entries; + + /** + * This field is the minimum number of devices supported by the hardware and + * the number of devices requested by the software. + */ + u32 remote_node_entries; + + /** + * This field is the minimum number of IO requests supported by the hardware + * and the number of IO requests requested by the software. + */ + u32 task_context_entries; + + /** + * This object contains all of the unsolicited frame specific + * data utilized by the core controller. + */ + struct scic_sds_unsolicited_frame_control uf_control; + + /* Phy Startup Data */ + /** + * This field is the driver timer handle for controller phy request startup. + * On controller start the controller will start each PHY individually in + * order of phy index. + */ + void *phy_startup_timer; + + /** + * This field is set when the phy_startup_timer is running and is cleared when + * the phy_startup_timer is stopped. + */ + bool phy_startup_timer_pending; + + /** + * This field is the index of the next phy start. It is initialized to 0 and + * increments for each phy index that is started. + */ + u32 next_phy_to_start; + + /** + * This field controlls the invalid link up notifications to the SCI_USER. If + * an invalid_link_up notification is reported a bit for the PHY index is set + * so further notifications are not made. Once the PHY object reports link up + * and is made part of a port then this bit for the PHY index is cleared. + */ + u8 invalid_phy_mask; + + /* + * This field saves the current interrupt coalescing number of the controller. + */ + u16 interrupt_coalesce_number; + + /* + * This field saves the current interrupt coalescing timeout value in microseconds. + */ + u32 interrupt_coalesce_timeout; + + /** + * This field is a pointer to the memory mapped register space for the + * struct smu_registers. + */ + struct smu_registers __iomem *smu_registers; + + /** + * This field is a pointer to the memory mapped register space for the + * struct scu_registers. + */ + struct scu_registers __iomem *scu_registers; + +}; struct isci_host { struct scic_sds_controller sci; @@ -92,6 +337,96 @@ struct isci_host { struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES]; }; +/** + * enum scic_sds_controller_states - This enumeration depicts all the states + * for the common controller state machine. + */ +enum scic_sds_controller_states { + /** + * Simply the initial state for the base controller state machine. + */ + SCI_BASE_CONTROLLER_STATE_INITIAL = 0, + + /** + * This state indicates that the controller is reset. The memory for + * the controller is in it's initial state, but the controller requires + * initialization. + * This state is entered from the INITIAL state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_CONTROLLER_STATE_RESET, + + /** + * This state is typically an action state that indicates the controller + * is in the process of initialization. In this state no new IO operations + * are permitted. + * This state is entered from the RESET state. + */ + SCI_BASE_CONTROLLER_STATE_INITIALIZING, + + /** + * This state indicates that the controller has been successfully + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + */ + SCI_BASE_CONTROLLER_STATE_INITIALIZED, + + /** + * This state indicates the the controller is in the process of becoming + * ready (i.e. starting). In this state no new IO operations are permitted. + * This state is entered from the INITIALIZED state. + */ + SCI_BASE_CONTROLLER_STATE_STARTING, + + /** + * This state indicates the controller is now ready. Thus, the user + * is able to perform IO operations on the controller. + * This state is entered from the STARTING state. + */ + SCI_BASE_CONTROLLER_STATE_READY, + + /** + * This state is typically an action state that indicates the controller + * is in the process of resetting. Thus, the user is unable to perform + * IO operations on the controller. A reset is considered destructive in + * most cases. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + * This state is entered from the STOPPED state. + */ + SCI_BASE_CONTROLLER_STATE_RESETTING, + + /** + * This state indicates that the controller is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCI_BASE_CONTROLLER_STATE_STOPPING, + + /** + * This state indicates that the controller has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCI_BASE_CONTROLLER_STATE_STOPPED, + + /** + * This state indicates that the controller could not successfully be + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the STARTING state. + * This state is entered from the STOPPING state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_CONTROLLER_STATE_FAILED, + + SCI_BASE_CONTROLLER_MAX_STATES + +}; + + + /** * struct isci_pci_info - This class represents the pci function containing the * controllers. Depending on PCI SKU, there could be up to 2 controllers in @@ -115,17 +450,13 @@ static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \ ihost = to_pci_info(pdev)->hosts[++id]) -static inline -enum isci_status isci_host_get_state( - struct isci_host *isci_host) +static inline enum isci_status isci_host_get_state(struct isci_host *isci_host) { return isci_host->status; } - -static inline void isci_host_change_state( - struct isci_host *isci_host, - enum isci_status status) +static inline void isci_host_change_state(struct isci_host *isci_host, + enum isci_status status) { unsigned long flags; @@ -140,9 +471,7 @@ static inline void isci_host_change_state( } -static inline int isci_host_can_queue( - struct isci_host *isci_host, - int num) +static inline int isci_host_can_queue(struct isci_host *isci_host, int num) { int ret = 0; unsigned long flags; @@ -163,9 +492,7 @@ static inline int isci_host_can_queue( return ret; } -static inline void isci_host_can_dequeue( - struct isci_host *isci_host, - int num) +static inline void isci_host_can_dequeue(struct isci_host *isci_host, int num) { unsigned long flags; @@ -208,39 +535,219 @@ static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic) } /** - * isci_host_scan_finished() - + * INCREMENT_QUEUE_GET() - * - * This function is one of the SCSI Host Template functions. The SCSI midlayer - * calls this function during a target scan, approx. once every 10 millisecs. + * This macro will increment the specified index to and if the index wraps to 0 + * it will toggel the cycle bit. */ -int isci_host_scan_finished( - struct Scsi_Host *, - unsigned long); +#define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \ + { \ + if ((index) + 1 == entry_count) { \ + (index) = 0; \ + (cycle) = (cycle) ^ (bit_toggle); \ + } else { \ + index = index + 1; \ + } \ + } +/** + * scic_sds_controller_get_port_configuration_agent() - + * + * This is a helper macro to get the port configuration agent from the + * controller object. + */ +#define scic_sds_controller_get_port_configuration_agent(controller) \ + (&(controller)->port_agent) /** - * isci_host_scan_start() - + * scic_sds_controller_get_protocol_engine_group() - * - * This function is one of the SCSI Host Template function, called by the SCSI - * mid layer berfore a target scan begins. The core library controller start - * routine is called from here. + * This macro returns the protocol engine group for this controller object. + * Presently we only support protocol engine group 0 so just return that */ -void isci_host_scan_start( - struct Scsi_Host *); +#define scic_sds_controller_get_protocol_engine_group(controller) 0 /** - * isci_host_start_complete() - + * scic_sds_io_tag_construct() - * - * This function is called by the core library, through the ISCI Module, to - * indicate controller start status. + * This macro constructs an IO tag from the sequence and index values. */ -void isci_host_start_complete( - struct isci_host *, - enum sci_status); +#define scic_sds_io_tag_construct(sequence, task_index) \ + ((sequence) << 12 | (task_index)) -void isci_host_stop_complete( - struct isci_host *isci_host, - enum sci_status completion_status); +/** + * scic_sds_io_tag_get_sequence() - + * + * This macro returns the IO sequence from the IO tag value. + */ +#define scic_sds_io_tag_get_sequence(io_tag) \ + (((io_tag) & 0xF000) >> 12) + +/** + * scic_sds_io_tag_get_index() - + * + * This macro returns the TCi from the io tag value + */ +#define scic_sds_io_tag_get_index(io_tag) \ + ((io_tag) & 0x0FFF) + +/** + * scic_sds_io_sequence_increment() - + * + * This is a helper macro to increment the io sequence count. We may find in + * the future that it will be faster to store the sequence count in such a way + * as we dont perform the shift operation to build io tag values so therefore + * need a way to incrment them correctly + */ +#define scic_sds_io_sequence_increment(value) \ + ((value) = (((value) + 1) & 0x000F)) + +/* expander attached sata devices require 3 rnc slots */ +static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev) +{ + struct domain_device *dev = sci_dev_to_domain(sci_dev); + + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + !sci_dev->is_direct_attached) + return SCU_STP_REMOTE_NODE_COUNT; + return SCU_SSP_REMOTE_NODE_COUNT; +} + +/** + * scic_sds_controller_set_invalid_phy() - + * + * This macro will set the bit in the invalid phy mask for this controller + * object. This is used to control messages reported for invalid link up + * notifications. + */ +#define scic_sds_controller_set_invalid_phy(controller, phy) \ + ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index)) + +/** + * scic_sds_controller_clear_invalid_phy() - + * + * This macro will clear the bit in the invalid phy mask for this controller + * object. This is used to control messages reported for invalid link up + * notifications. + */ +#define scic_sds_controller_clear_invalid_phy(controller, phy) \ + ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) + +static inline struct device *scic_to_dev(struct scic_sds_controller *scic) +{ + return &scic_to_ihost(scic)->pdev->dev; +} + +static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) +{ + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) + return NULL; + + return &iphy->isci_port->isci_host->pdev->dev; +} + +static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port) +{ + struct isci_port *iport = sci_port_to_iport(sci_port); + + if (!iport || !iport->isci_host) + return NULL; + + return &iport->isci_host->pdev->dev; +} + +static inline struct device *scirdev_to_dev(struct scic_sds_remote_device *sci_dev) +{ + struct isci_remote_device *idev = + container_of(sci_dev, typeof(*idev), sci); + + if (!idev || !idev->isci_port || !idev->isci_port->isci_host) + return NULL; + + return &idev->isci_port->isci_host->pdev->dev; +} + +enum { + ISCI_SI_REVA0, + ISCI_SI_REVA2, + ISCI_SI_REVB0, +}; + +extern int isci_si_rev; + +static inline bool is_a0(void) +{ + return isci_si_rev == ISCI_SI_REVA0; +} + +static inline bool is_a2(void) +{ + return isci_si_rev == ISCI_SI_REVA2; +} + +static inline bool is_b0(void) +{ + return isci_si_rev > ISCI_SI_REVA2; +} + +void scic_sds_controller_post_request(struct scic_sds_controller *scic, + u32 request); +void scic_sds_controller_release_frame(struct scic_sds_controller *scic, + u32 frame_index); +void scic_sds_controller_copy_sata_response(void *response_buffer, + void *frame_header, + void *frame_buffer); +enum sci_status scic_sds_controller_allocate_remote_node_context(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 *node_id); +void scic_sds_controller_free_remote_node_context( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 node_id); +union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( + struct scic_sds_controller *scic, + u16 node_id); + +struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, + u16 io_tag); + +struct scu_task_context *scic_sds_controller_get_task_context_buffer( + struct scic_sds_controller *scic, + u16 io_tag); + +void scic_sds_controller_power_control_queue_insert( + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy); + +void scic_sds_controller_power_control_queue_remove( + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy); + +void scic_sds_controller_link_up( + struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +void scic_sds_controller_link_down( + struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +void scic_sds_controller_remote_device_stopped( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev); + +void scic_sds_controller_copy_task_context( + struct scic_sds_controller *scic, + struct scic_sds_request *this_request); + +void scic_sds_controller_register_setup(struct scic_sds_controller *scic); + +enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req); +int isci_host_scan_finished(struct Scsi_Host *, unsigned long); +void isci_host_scan_start(struct Scsi_Host *); int isci_host_init(struct isci_host *); @@ -262,4 +769,35 @@ void isci_host_remote_device_start_complete( struct isci_remote_device *, enum sci_status); -#endif /* !defined(_SCI_HOST_H_) */ +void scic_controller_disable_interrupts( + struct scic_sds_controller *scic); + +enum sci_status scic_controller_start_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *io_request, + u16 io_tag); + +enum sci_task_status scic_controller_start_task( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *task_request, + u16 io_tag); + +enum sci_status scic_controller_terminate_request( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *request); + +enum sci_status scic_controller_complete_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *io_request); + +u16 scic_controller_allocate_io_tag( + struct scic_sds_controller *scic); + +enum sci_status scic_controller_free_io_tag( + struct scic_sds_controller *scic, + u16 io_tag); +#endif diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index df132c07badf723df186b38d46b88c07d98a5a3c..bda701655b25d203f3a9ce18f415d2d8b505cf7d 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -61,9 +61,7 @@ #include #include "isci.h" #include "task.h" -#include "sci_environment.h" #include "probe_roms.h" -#include "scic_controller.h" static struct scsi_transport_template *isci_transport_template; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 800f2332ecd0368cfdf12fa053e4884a24ed22dd..d288897b85fb1316a0daa88d285722cec253d265 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -532,10 +532,4 @@ extern unsigned char max_concurr_spinup; irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); irqreturn_t isci_error_isr(int vec, void *data); - -struct scic_sds_controller; -bool scic_sds_controller_isr(struct scic_sds_controller *scic); -void scic_sds_controller_completion_handler(struct scic_sds_controller *scic); -bool scic_sds_controller_error_isr(struct scic_sds_controller *scic); -void scic_sds_controller_error_handler(struct scic_sds_controller *scic); #endif /* __ISCI_H__ */ diff --git a/drivers/scsi/isci/core/sci_pool.h b/drivers/scsi/isci/pool.h similarity index 100% rename from drivers/scsi/isci/core/sci_pool.h rename to drivers/scsi/isci/pool.h diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 35e2e517f67154171a1915a432178fee6c41ea1f..f44fa20cad96e02396bc472e5828d3e4cc148ff8 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -53,13 +53,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the isci port implementation. - * - * - */ - - #include #include "isci.h" #include "scic_io_request.h" @@ -68,7 +61,6 @@ #include "scic_port.h" #include "port.h" #include "request.h" -#include "core/scic_sds_controller.h" static void isci_port_change_state(struct isci_port *iport, enum isci_status status) { diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 70551744044160e239889c8cbdeb857f70d93c7d..9bc173fa49e1d318965eb153103947d0b21a0177 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -32,7 +32,6 @@ #include "isci.h" #include "task.h" -#include "sci_environment.h" #include "probe_roms.h" struct efi_variable { diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 8b1ef19a67326202999c53d2e639c231b2fa773c..00334b9ccd806f9604ffe896c24141ee3a10e72e 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -57,16 +57,13 @@ #include "port.h" #include "remote_device.h" #include "request.h" -#include "scic_controller.h" #include "scic_io_request.h" #include "scic_phy.h" #include "scic_port.h" -#include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_node_context.h" #include "scic_sds_request.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" #include "task.h" diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 5e85a18a06defc25ad6235251beacd3d0ee34f1e..af4759383db4531b32db7cf974a7a2a8d41441bd 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -53,12 +53,11 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "host.h" #include "sci_base_state_machine.h" -#include "scic_sds_controller.h" #include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/remote_node_table.c b/drivers/scsi/isci/remote_node_table.c index 8886146d9db211320e98178b6c0c84cf4bb3ec2c..80f44c25f45f8c73609e524332cdad3b8ed581e9 100644 --- a/drivers/scsi/isci/remote_node_table.c +++ b/drivers/scsi/isci/remote_node_table.c @@ -60,7 +60,6 @@ * */ #include "sci_util.h" -#include "sci_environment.h" #include "remote_node_table.h" #include "remote_node_context.h" diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index a58072807a37a34c97a2f9c7c8cbddb7a5d26337..4961ee34709121fe7c121380c5913dca3e0b4907 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -62,7 +62,6 @@ #include "sata.h" #include "scu_completion_codes.h" #include "scic_sds_request.h" -#include "scic_controller.h" #include "sas.h" static enum sci_status isci_request_ssp_request_construct( diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h deleted file mode 100644 index 30addba4d43afbff6f0c780e391ffc8587cc2c9c..0000000000000000000000000000000000000000 --- a/drivers/scsi/isci/sci_environment.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_ENVIRONMENT_H_ -#define _SCI_ENVIRONMENT_H_ - -#include "host.h" - - -static inline struct device *scic_to_dev(struct scic_sds_controller *scic) -{ - return &scic_to_ihost(scic)->pdev->dev; -} - -static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) -{ - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) - return NULL; - - return &iphy->isci_port->isci_host->pdev->dev; -} - -static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port) -{ - struct isci_port *iport = sci_port_to_iport(sci_port); - - if (!iport || !iport->isci_host) - return NULL; - - return &iport->isci_host->pdev->dev; -} - -static inline struct device *scirdev_to_dev( - struct scic_sds_remote_device *sci_dev) -{ - struct isci_remote_device *idev = - container_of(sci_dev, typeof(*idev), sci); - - if (!idev || !idev->isci_port || !idev->isci_port->isci_host) - return NULL; - - return &idev->isci_port->isci_host->pdev->dev; -} - -enum { - ISCI_SI_REVA0, - ISCI_SI_REVA2, - ISCI_SI_REVB0, -}; - -extern int isci_si_rev; - -static inline bool is_a0(void) -{ - return isci_si_rev == ISCI_SI_REVA0; -} - -static inline bool is_a2(void) -{ - return isci_si_rev == ISCI_SI_REVA2; -} - -static inline bool is_b0(void) -{ - return isci_si_rev > ISCI_SI_REVA2; -} - -#endif diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 597c49020ac8ba1db088880b9d9767e049d51f10..2a86038819299af6d70b14b57ad2b8c0f7d3126b 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -65,7 +65,6 @@ #include "sata.h" #include "task.h" #include "scic_sds_request.h" -#include "scic_controller.h" #include "timers.h" /**