From cbde8123f6c18f34781de3a5095fb58e951326f4 Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Fri, 5 Apr 2013 10:34:51 +0000 Subject: [PATCH] mrf24j40: Enable link-layer acknowledgement and retry On the MRF24J40, link-layer acknowledgment request and retry must be turned on explicitly for each packet. Turn this on in the hardware based on the FC_ACK_REQ bit being set in the packet. Also, now that failure to receive an ACK will cause the hardware to report failure of transmission, change the log level for this failure to debug level. Signed-off-by: Alan Ott Signed-off-by: David S. Miller --- drivers/net/ieee802154/mrf24j40.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c index ca0035116a18..3d3c529e76ec 100644 --- a/drivers/net/ieee802154/mrf24j40.c +++ b/drivers/net/ieee802154/mrf24j40.c @@ -25,6 +25,7 @@ #include #include #include +#include /* MRF24J40 Short Address Registers */ #define REG_RXMCR 0x00 /* Receive MAC control */ @@ -349,7 +350,9 @@ static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb) if (ret) goto err; val |= 0x1; - val &= ~0x4; + /* Set TXNACKREQ if the ACK bit is set in the packet. */ + if (skb->data[0] & IEEE802154_FC_ACK_REQ) + val |= 0x4; write_short_reg(devrec, REG_TXNCON, val); INIT_COMPLETION(devrec->tx_complete); @@ -371,7 +374,7 @@ static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb) if (ret) goto err; if (val & 0x1) { - dev_err(printdev(devrec), "Error Sending. Retry count exceeded\n"); + dev_dbg(printdev(devrec), "Error Sending. Retry count exceeded\n"); ret = -ECOMM; /* TODO: Better error code ? */ } else dev_dbg(printdev(devrec), "Packet Sent\n"); -- GitLab