提交 cb84d6e7 编写于 作者: G Greg Ungerer 提交者: Linus Torvalds

fix work queues in FEC driver

Fix the work queue code in the FEC driver.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 f0d3464f
......@@ -190,6 +190,8 @@ struct fec_enet_private {
/* Hardware registers of the FEC device */
volatile fec_t *hwp;
struct net_device *netdev;
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
unsigned char *tx_bounce[TX_RING_SIZE];
struct sk_buff* tx_skbuff[TX_RING_SIZE];
......@@ -1939,9 +1941,10 @@ static void mii_display_status(struct net_device *dev)
printk(".\n");
}
static void mii_display_config(struct net_device *dev)
static void mii_display_config(struct work_struct *work)
{
struct fec_enet_private *fep = netdev_priv(dev);
struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
struct net_device *dev = fep->netdev;
uint status = fep->phy_status;
/*
......@@ -1975,9 +1978,10 @@ static void mii_display_config(struct net_device *dev)
fep->sequence_done = 1;
}
static void mii_relink(struct net_device *dev)
static void mii_relink(struct work_struct *work)
{
struct fec_enet_private *fep = netdev_priv(dev);
struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
struct net_device *dev = fep->netdev;
int duplex;
/*
......@@ -2021,7 +2025,7 @@ static void mii_queue_relink(uint mii_reg, struct net_device *dev)
return;
fep->mii_phy_task_queued = 1;
INIT_WORK(&fep->phy_task, (void*)mii_relink, dev);
INIT_WORK(&fep->phy_task, mii_relink);
schedule_work(&fep->phy_task);
}
......@@ -2034,7 +2038,7 @@ static void mii_queue_config(uint mii_reg, struct net_device *dev)
return;
fep->mii_phy_task_queued = 1;
INIT_WORK(&fep->phy_task, (void*)mii_display_config, dev);
INIT_WORK(&fep->phy_task, mii_display_config);
schedule_work(&fep->phy_task);
}
......@@ -2329,6 +2333,7 @@ int __init fec_enet_init(struct net_device *dev)
fep->index = index;
fep->hwp = fecp;
fep->netdev = dev;
/* Whack a reset. We should wait for this.
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册