From c974a9e5a3c52f1c61501b22a0b0a278250a6bd1 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Mon, 21 Jan 2008 11:44:11 +0100 Subject: [PATCH] CRIS v10: Add synchronous serial port driver for CRIS v10. --- arch/cris/Kconfig | 31 + arch/cris/arch-v10/drivers/Makefile | 1 + arch/cris/arch-v10/drivers/sync_serial.c | 1441 ++++++++++++++++++++++ 3 files changed, 1473 insertions(+) create mode 100644 arch/cris/arch-v10/drivers/sync_serial.c diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 4a27ef374203..e6d440ae5e5b 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -292,6 +292,37 @@ config ETRAX_PCF8563 endchoice +config ETRAX_SYNCHRONOUS_SERIAL + bool "Synchronous serial-port support" + help + Select this to enable the synchronous serial port driver. + +config ETRAX_SYNCHRONOUS_SERIAL_PORT0 + bool "Synchronous serial port 0 enabled" + depends on ETRAX_SYNCHRONOUS_SERIAL + help + Enabled synchronous serial port 0. + +config ETRAX_SYNCHRONOUS_SERIAL0_DMA + bool "Enable DMA on synchronous serial port 0." + depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0 + help + A synchronous serial port can run in manual or DMA mode. + Selecting this option will make it run in DMA mode. + +config ETRAX_SYNCHRONOUS_SERIAL_PORT1 + bool "Synchronous serial port 1 enabled" + depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10) + help + Enabled synchronous serial port 1. + +config ETRAX_SYNCHRONOUS_SERIAL1_DMA + bool "Enable DMA on synchronous serial port 1." + depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1 + help + A synchronous serial port can run in manual or DMA mode. + Selecting this option will make it run in DMA mode. + choice prompt "Network LED behavior" depends on ETRAX_ETHERNET diff --git a/arch/cris/arch-v10/drivers/Makefile b/arch/cris/arch-v10/drivers/Makefile index 074e10ff4156..44bf2e88c26e 100644 --- a/arch/cris/arch-v10/drivers/Makefile +++ b/arch/cris/arch-v10/drivers/Makefile @@ -8,4 +8,5 @@ obj-$(CONFIG_ETRAX_I2C_EEPROM) += eeprom.o obj-$(CONFIG_ETRAX_GPIO) += gpio.o obj-$(CONFIG_ETRAX_DS1302) += ds1302.o obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o +obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c new file mode 100644 index 000000000000..069546e342c5 --- /dev/null +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -0,0 +1,1441 @@ +/* + * Simple synchronous serial port driver for ETRAX 100LX. + * + * Synchronous serial ports are used for continuous streamed data like audio. + * The default setting for this driver is compatible with the STA 013 MP3 + * decoder. The driver can easily be tuned to fit other audio encoder/decoders + * and SPI + * + * Copyright (c) 2001-2008 Axis Communications AB + * + * Author: Mikael Starvik, Johan Adolfsson + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* The receiver is a bit tricky beacuse of the continuous stream of data.*/ +/* */ +/* Three DMA descriptors are linked together. Each DMA descriptor is */ +/* responsible for port->bufchunk of a common buffer. */ +/* */ +/* +---------------------------------------------+ */ +/* | +----------+ +----------+ +----------+ | */ +/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */ +/* +----------+ +----------+ +----------+ */ +/* | | | */ +/* v v v */ +/* +-------------------------------------+ */ +/* | BUFFER | */ +/* +-------------------------------------+ */ +/* |<- data_avail ->| */ +/* readp writep */ +/* */ +/* If the application keeps up the pace readp will be right after writep.*/ +/* If the application can't keep the pace we have to throw away data. */ +/* The idea is that readp should be ready with the data pointed out by */ +/* Descr[i] when the DMA has filled in Descr[i+1]. */ +/* Otherwise we will discard */ +/* the rest of the data pointed out by Descr1 and set readp to the start */ +/* of Descr2 */ + +#define SYNC_SERIAL_MAJOR 125 + +/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */ +/* words can be handled */ +#define IN_BUFFER_SIZE 12288 +#define IN_DESCR_SIZE 256 +#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) +#define OUT_BUFFER_SIZE 4096 + +#define DEFAULT_FRAME_RATE 0 +#define DEFAULT_WORD_RATE 7 + +/* NOTE: Enabling some debug will likely cause overrun or underrun, + * especially if manual mode is use. + */ +#define DEBUG(x) +#define DEBUGREAD(x) +#define DEBUGWRITE(x) +#define DEBUGPOLL(x) +#define DEBUGRXINT(x) +#define DEBUGTXINT(x) + +/* Define some macros to access ETRAX 100 registers */ +#define SETF(var, reg, field, val) \ + do { \ + var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_FIELD_(reg##_, field##_, val); \ + } while (0) + +#define SETS(var, reg, field, val) \ + do { \ + var = (var & ~IO_MASK_(reg##_, field##_)) | \ + IO_STATE_(reg##_, field##_, _##val); \ + } while (0) + +struct sync_port { + /* Etrax registers and bits*/ + const volatile unsigned *const status; + volatile unsigned *const ctrl_data; + volatile unsigned *const output_dma_first; + volatile unsigned char *const output_dma_cmd; + volatile unsigned char *const output_dma_clr_irq; + volatile unsigned *const input_dma_first; + volatile unsigned char *const input_dma_cmd; + volatile unsigned *const input_dma_descr; + /* 8*4 */ + volatile unsigned char *const input_dma_clr_irq; + volatile unsigned *const data_out; + const volatile unsigned *const data_in; + char data_avail_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ + char transmitter_ready_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ + char input_dma_descr_bit; /* In R_IRQ_MASK2_RD */ + + char output_dma_bit; /* In R_IRQ_MASK2_RD */ + /* End of fields initialised in array */ + char started; /* 1 if port has been started */ + char port_nbr; /* Port 0 or 1 */ + char busy; /* 1 if port is busy */ + + char enabled; /* 1 if port is enabled */ + char use_dma; /* 1 if port uses dma */ + char tr_running; + + char init_irqs; + + /* Register shadow */ + unsigned int ctrl_data_shadow; + /* Remaining bytes for current transfer */ + volatile unsigned int out_count; + /* Current position in out_buffer */ + unsigned char *outp; + /* 16*4 */ + /* Next byte to be read by application */ + volatile unsigned char *volatile readp; + /* Next byte to be written by etrax */ + volatile unsigned char *volatile writep; + + unsigned int in_buffer_size; + unsigned int inbufchunk; + struct etrax_dma_descr out_descr __attribute__ ((aligned(32))); + struct etrax_dma_descr in_descr[NUM_IN_DESCR] __attribute__ ((aligned(32))); + unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32))); + unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32))); + unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32))); + struct etrax_dma_descr *next_rx_desc; + struct etrax_dma_descr *prev_rx_desc; + int full; + + wait_queue_head_t out_wait_q; + wait_queue_head_t in_wait_q; +}; + + +static int etrax_sync_serial_init(void); +static void initialize_port(int portnbr); +static inline int sync_data_avail(struct sync_port *port); + +static int sync_serial_open(struct inode *inode, struct file *file); +static int sync_serial_release(struct inode *inode, struct file *file); +static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); + +static int sync_serial_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static ssize_t sync_serial_write(struct file *file, const char *buf, + size_t count, loff_t *ppos); +static ssize_t sync_serial_read(struct file *file, char *buf, + size_t count, loff_t *ppos); + +#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ + defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ + (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ + defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))) +#define SYNC_SER_DMA +#endif + +static void send_word(struct sync_port *port); +static void start_dma(struct sync_port *port, const char *data, int count); +static void start_dma_in(struct sync_port *port); +#ifdef SYNC_SER_DMA +static irqreturn_t tr_interrupt(int irq, void *dev_id); +static irqreturn_t rx_interrupt(int irq, void *dev_id); +#endif +#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ + !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ + (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ + !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))) +#define SYNC_SER_MANUAL +#endif +#ifdef SYNC_SER_MANUAL +static irqreturn_t manual_interrupt(int irq, void *dev_id); +#endif + +/* The ports */ +static struct sync_port ports[] = { + { + .status = R_SYNC_SERIAL1_STATUS, + .ctrl_data = R_SYNC_SERIAL1_CTRL, + .output_dma_first = R_DMA_CH8_FIRST, + .output_dma_cmd = R_DMA_CH8_CMD, + .output_dma_clr_irq = R_DMA_CH8_CLR_INTR, + .input_dma_first = R_DMA_CH9_FIRST, + .input_dma_cmd = R_DMA_CH9_CMD, + .input_dma_descr = R_DMA_CH9_DESCR, + .input_dma_clr_irq = R_DMA_CH9_CLR_INTR, + .data_out = R_SYNC_SERIAL1_TR_DATA, + .data_in = R_SYNC_SERIAL1_REC_DATA, + .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_data), + .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_ready), + .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma9_descr), + .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma8_eop), + .init_irqs = 1, +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) + .use_dma = 1, +#else + .use_dma = 0, +#endif + }, + { + .status = R_SYNC_SERIAL3_STATUS, + .ctrl_data = R_SYNC_SERIAL3_CTRL, + .output_dma_first = R_DMA_CH4_FIRST, + .output_dma_cmd = R_DMA_CH4_CMD, + .output_dma_clr_irq = R_DMA_CH4_CLR_INTR, + .input_dma_first = R_DMA_CH5_FIRST, + .input_dma_cmd = R_DMA_CH5_CMD, + .input_dma_descr = R_DMA_CH5_DESCR, + .input_dma_clr_irq = R_DMA_CH5_CLR_INTR, + .data_out = R_SYNC_SERIAL3_TR_DATA, + .data_in = R_SYNC_SERIAL3_REC_DATA, + .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_data), + .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_ready), + .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma5_descr), + .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma4_eop), + .init_irqs = 1, +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) + .use_dma = 1, +#else + .use_dma = 0, +#endif + } +}; + +/* Register shadows */ +static unsigned sync_serial_prescale_shadow; + +#define NUMBER_OF_PORTS 2 + +static struct file_operations sync_serial_fops = { + .owner = THIS_MODULE, + .write = sync_serial_write, + .read = sync_serial_read, + .poll = sync_serial_poll, + .ioctl = sync_serial_ioctl, + .open = sync_serial_open, + .release = sync_serial_release +}; + +static int __init etrax_sync_serial_init(void) +{ + ports[0].enabled = 0; + ports[1].enabled = 0; + +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + if (cris_request_io_interface(if_sync_serial_1, "sync_ser1")) { + printk(KERN_CRIT "ETRAX100LX sync_serial: " + "Could not allocate IO group for port %d\n", 0); + return -EBUSY; + } +#endif +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + if (cris_request_io_interface(if_sync_serial_3, "sync_ser3")) { +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + cris_free_io_interface(if_sync_serial_1); +#endif + printk(KERN_CRIT "ETRAX100LX sync_serial: " + "Could not allocate IO group for port %d\n", 1); + return -EBUSY; + } +#endif + + if (register_chrdev(SYNC_SERIAL_MAJOR, "sync serial", + &sync_serial_fops) < 0) { +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + cris_free_io_interface(if_sync_serial_3); +#endif +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + cris_free_io_interface(if_sync_serial_1); +#endif + printk("unable to get major for synchronous serial port\n"); + return -EBUSY; + } + + /* Deselect synchronous serial ports while configuring. */ + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); + *R_GEN_CONFIG_II = gen_config_ii_shadow; + + /* Initialize Ports */ +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) + ports[0].enabled = 1; + SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser1, ss1extra); + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) + ports[0].use_dma = 1; +#else + ports[0].use_dma = 0; +#endif + initialize_port(0); +#endif + +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) + ports[1].enabled = 1; + SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser3, ss3extra); + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); +#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) + ports[1].use_dma = 1; +#else + ports[1].use_dma = 0; +#endif + initialize_port(1); +#endif + + *R_PORT_PB_I2C = port_pb_i2c_shadow; /* Use PB4/PB7 */ + + /* Set up timing */ + *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow = ( + IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u1, external) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u3, external) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, prescaler, div4) | + IO_FIELD(R_SYNC_SERIAL_PRESCALE, frame_rate, + DEFAULT_FRAME_RATE) | + IO_FIELD(R_SYNC_SERIAL_PRESCALE, word_rate, DEFAULT_WORD_RATE) | + IO_STATE(R_SYNC_SERIAL_PRESCALE, warp_mode, normal)); + + /* Select synchronous ports */ + *R_GEN_CONFIG_II = gen_config_ii_shadow; + + printk(KERN_INFO "ETRAX 100LX synchronous serial port driver\n"); + return 0; +} + +static void __init initialize_port(int portnbr) +{ + struct sync_port *port = &ports[portnbr]; + + DEBUG(printk(KERN_DEBUG "Init sync serial port %d\n", portnbr)); + + port->started = 0; + port->port_nbr = portnbr; + port->busy = 0; + port->tr_running = 0; + + port->out_count = 0; + port->outp = port->out_buffer; + + port->readp = port->flip; + port->writep = port->flip; + port->in_buffer_size = IN_BUFFER_SIZE; + port->inbufchunk = IN_DESCR_SIZE; + port->next_rx_desc = &port->in_descr[0]; + port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1]; + port->prev_rx_desc->ctrl = d_eol; + + init_waitqueue_head(&port->out_wait_q); + init_waitqueue_head(&port->in_wait_q); + + port->ctrl_data_shadow = + IO_STATE(R_SYNC_SERIAL1_CTRL, tr_baud, c115k2Hz) | + IO_STATE(R_SYNC_SERIAL1_CTRL, mode, master_output) | + IO_STATE(R_SYNC_SERIAL1_CTRL, error, ignore) | + IO_STATE(R_SYNC_SERIAL1_CTRL, rec_enable, disable) | + IO_STATE(R_SYNC_SERIAL1_CTRL, f_synctype, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, f_syncsize, word) | + IO_STATE(R_SYNC_SERIAL1_CTRL, f_sync, on) | + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_mode, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_halt, stopped) | + IO_STATE(R_SYNC_SERIAL1_CTRL, bitorder, msb) | + IO_STATE(R_SYNC_SERIAL1_CTRL, tr_enable, disable) | + IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit) | + IO_STATE(R_SYNC_SERIAL1_CTRL, buf_empty, lmt_8) | + IO_STATE(R_SYNC_SERIAL1_CTRL, buf_full, lmt_8) | + IO_STATE(R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled) | + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_polarity, neg) | + IO_STATE(R_SYNC_SERIAL1_CTRL, frame_polarity, normal)| + IO_STATE(R_SYNC_SERIAL1_CTRL, status_polarity, inverted)| + IO_STATE(R_SYNC_SERIAL1_CTRL, clk_driver, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, frame_driver, normal) | + IO_STATE(R_SYNC_SERIAL1_CTRL, status_driver, normal)| + IO_STATE(R_SYNC_SERIAL1_CTRL, def_out0, high); + + if (port->use_dma) + port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, + dma_enable, on); + else + port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, + dma_enable, off); + + *port->ctrl_data = port->ctrl_data_shadow; +} + +static inline int sync_data_avail(struct sync_port *port) +{ + int avail; + unsigned char *start; + unsigned char *end; + + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- - ----- + * ^rp ^wp ^wp ^rp + */ + if (end >= start) + avail = end - start; + else + avail = port->in_buffer_size - (start - end); + return avail; +} + +static inline int sync_data_avail_to_end(struct sync_port *port) +{ + int avail; + unsigned char *start; + unsigned char *end; + + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- ----- + * ^rp ^wp ^wp ^rp + */ + + if (end >= start) + avail = end - start; + else + avail = port->flip + port->in_buffer_size - start; + return avail; +} + + +static int sync_serial_open(struct inode *inode, struct file *file) +{ + int dev = MINOR(inode->i_rdev); + struct sync_port *port; + int mode; + + DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + /* Allow open this device twice (assuming one reader and one writer) */ + if (port->busy == 2) { + DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); + return -EBUSY; + } + if (port->init_irqs) { + if (port->use_dma) { + if (port == &ports[0]) { +#ifdef SYNC_SER_DMA + if (request_irq(24, tr_interrupt, 0, + "synchronous serial 1 dma tr", + &ports[0])) { + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 IRQ"); + return -EBUSY; + } else if (request_irq(25, rx_interrupt, 0, + "synchronous serial 1 dma rx", + &ports[0])) { + free_irq(24, &port[0]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 IRQ"); + return -EBUSY; + } else if (cris_request_dma(8, + "synchronous serial 1 dma tr", + DMA_VERBOSE_ON_ERROR, + dma_ser1)) { + free_irq(24, &port[0]); + free_irq(25, &port[0]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 " + "TX DMA channel"); + return -EBUSY; + } else if (cris_request_dma(9, + "synchronous serial 1 dma rec", + DMA_VERBOSE_ON_ERROR, + dma_ser1)) { + cris_free_dma(8, NULL); + free_irq(24, &port[0]); + free_irq(25, &port[0]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 1 " + "RX DMA channel"); + return -EBUSY; + } +#endif + RESET_DMA(8); WAIT_DMA(8); + RESET_DMA(9); WAIT_DMA(9); + *R_DMA_CH8_CLR_INTR = + IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, + do); + *R_DMA_CH9_CLR_INTR = + IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH9_CLR_INTR, clr_descr, + do); + *R_IRQ_MASK2_SET = + IO_STATE(R_IRQ_MASK2_SET, dma8_eop, + set) | + IO_STATE(R_IRQ_MASK2_SET, dma9_descr, + set); + } else if (port == &ports[1]) { +#ifdef SYNC_SER_DMA + if (request_irq(20, tr_interrupt, 0, + "synchronous serial 3 dma tr", + &ports[1])) { + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 IRQ"); + return -EBUSY; + } else if (request_irq(21, rx_interrupt, 0, + "synchronous serial 3 dma rx", + &ports[1])) { + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 IRQ"); + return -EBUSY; + } else if (cris_request_dma(4, + "synchronous serial 3 dma tr", + DMA_VERBOSE_ON_ERROR, + dma_ser3)) { + free_irq(21, &ports[1]); + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 " + "TX DMA channel"); + return -EBUSY; + } else if (cris_request_dma(5, + "synchronous serial 3 dma rec", + DMA_VERBOSE_ON_ERROR, + dma_ser3)) { + cris_free_dma(4, NULL); + free_irq(21, &ports[1]); + free_irq(20, &ports[1]); + printk(KERN_CRIT "Can't alloc " + "sync serial port 3 " + "RX DMA channel"); + return -EBUSY; + } +#endif + RESET_DMA(4); WAIT_DMA(4); + RESET_DMA(5); WAIT_DMA(5); + *R_DMA_CH4_CLR_INTR = + IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, + do); + *R_DMA_CH5_CLR_INTR = + IO_STATE(R_DMA_CH5_CLR_INTR, clr_eop, + do) | + IO_STATE(R_DMA_CH5_CLR_INTR, clr_descr, + do); + *R_IRQ_MASK2_SET = + IO_STATE(R_IRQ_MASK2_SET, dma4_eop, + set) | + IO_STATE(R_IRQ_MASK2_SET, dma5_descr, + set); + } + start_dma_in(port); + port->init_irqs = 0; + } else { /* !port->use_dma */ +#ifdef SYNC_SER_MANUAL + if (port == &ports[0]) { + if (request_irq(8, + manual_interrupt, + IRQF_SHARED | IRQF_DISABLED, + "synchronous serial manual irq", + &ports[0])) { + printk(KERN_CRIT "Can't alloc " + "sync serial manual irq"); + return -EBUSY; + } + } else if (port == &ports[1]) { + if (request_irq(8, + manual_interrupt, + IRQF_SHARED | IRQF_DISABLED, + "synchronous serial manual irq", + &ports[1])) { + printk(KERN_CRIT "Can't alloc " + "sync serial manual irq"); + return -EBUSY; + } + } + port->init_irqs = 0; +#else + panic("sync_serial: Manual mode not supported.\n"); +#endif /* SYNC_SER_MANUAL */ + } + } /* port->init_irqs */ + + port->busy++; + /* Start port if we use it as input */ + mode = IO_EXTRACT(R_SYNC_SERIAL1_CTRL, mode, port->ctrl_data_shadow); + if (mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_input) || + mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_input) || + mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_bidir) || + mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_bidir)) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, + running); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, + enable); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, + enable); + port->started = 1; + *port->ctrl_data = port->ctrl_data_shadow; + if (!port->use_dma) + *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; + DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev)); + } + return 0; +} + +static int sync_serial_release(struct inode *inode, struct file *file) +{ + int dev = MINOR(inode->i_rdev); + struct sync_port *port; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + if (port->busy) + port->busy--; + if (!port->busy) + *R_IRQ_MASK1_CLR = ((1 << port->data_avail_bit) | + (1 << port->transmitter_ready_bit)); + + return 0; +} + + + +static unsigned int sync_serial_poll(struct file *file, poll_table *wait) +{ + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + unsigned int mask = 0; + struct sync_port *port; + DEBUGPOLL(static unsigned int prev_mask = 0); + + port = &ports[dev]; + poll_wait(file, &port->out_wait_q, wait); + poll_wait(file, &port->in_wait_q, wait); + /* Some room to write */ + if (port->out_count < OUT_BUFFER_SIZE) + mask |= POLLOUT | POLLWRNORM; + /* At least an inbufchunk of data */ + if (sync_data_avail(port) >= port->inbufchunk) + mask |= POLLIN | POLLRDNORM; + + DEBUGPOLL(if (mask != prev_mask) + printk(KERN_DEBUG "sync_serial_poll: mask 0x%08X %s %s\n", + mask, + mask & POLLOUT ? "POLLOUT" : "", + mask & POLLIN ? "POLLIN" : ""); + prev_mask = mask; + ); + return mask; +} + +static int sync_serial_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int return_val = 0; + unsigned long flags; + + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + struct sync_port *port; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -1; + } + port = &ports[dev]; + + local_irq_save(flags); + /* Disable port while changing config */ + if (dev) { + if (port->use_dma) { + RESET_DMA(4); WAIT_DMA(4); + port->tr_running = 0; + port->out_count = 0; + port->outp = port->out_buffer; + *R_DMA_CH4_CLR_INTR = + IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) | + IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do); + } + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); + } else { + if (port->use_dma) { + RESET_DMA(8); WAIT_DMA(8); + port->tr_running = 0; + port->out_count = 0; + port->outp = port->out_buffer; + *R_DMA_CH8_CLR_INTR = + IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) | + IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do); + } + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); + } + *R_GEN_CONFIG_II = gen_config_ii_shadow; + local_irq_restore(flags); + + switch (cmd) { + case SSP_SPEED: + if (GET_SPEED(arg) == CODEC) { + if (dev) + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u3, + codec); + else + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u1, + codec); + + SETF(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, prescaler, + GET_FREQ(arg)); + SETF(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, frame_rate, + GET_FRAME_RATE(arg)); + SETF(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, word_rate, + GET_WORD_RATE(arg)); + } else { + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + tr_baud, GET_SPEED(arg)); + if (dev) + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u3, + baudrate); + else + SETS(sync_serial_prescale_shadow, + R_SYNC_SERIAL_PRESCALE, clk_sel_u1, + baudrate); + } + break; + case SSP_MODE: + if (arg > 5) + return -EINVAL; + if (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT) + *R_IRQ_MASK1_CLR = 1 << port->data_avail_bit; + else if (!port->use_dma) + *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, arg); + break; + case SSP_FRAME_SYNC: + if (arg & NORMAL_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_synctype, normal); + else if (arg & EARLY_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_synctype, early); + + if (arg & BIT_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_syncsize, bit); + else if (arg & WORD_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_syncsize, word); + else if (arg & EXTENDED_SYNC) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_syncsize, extended); + + if (arg & SYNC_ON) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_sync, on); + else if (arg & SYNC_OFF) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + f_sync, off); + + if (arg & WORD_SIZE_8) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size8bit); + else if (arg & WORD_SIZE_12) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size12bit); + else if (arg & WORD_SIZE_16) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size16bit); + else if (arg & WORD_SIZE_24) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size24bit); + else if (arg & WORD_SIZE_32) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + wordsize, size32bit); + + if (arg & BIT_ORDER_MSB) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + bitorder, msb); + else if (arg & BIT_ORDER_LSB) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + bitorder, lsb); + + if (arg & FLOW_CONTROL_ENABLE) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + flow_ctrl, enabled); + else if (arg & FLOW_CONTROL_DISABLE) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + flow_ctrl, disabled); + + if (arg & CLOCK_NOT_GATED) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_mode, normal); + else if (arg & CLOCK_GATED) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_mode, gated); + + break; + case SSP_IPOLARITY: + /* NOTE!! negedge is considered NORMAL */ + if (arg & CLOCK_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_polarity, neg); + else if (arg & CLOCK_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_polarity, pos); + + if (arg & FRAME_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_polarity, normal); + else if (arg & FRAME_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_polarity, inverted); + + if (arg & STATUS_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_polarity, normal); + else if (arg & STATUS_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_polarity, inverted); + break; + case SSP_OPOLARITY: + if (arg & CLOCK_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_driver, normal); + else if (arg & CLOCK_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_driver, inverted); + + if (arg & FRAME_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_driver, normal); + else if (arg & FRAME_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_driver, inverted); + + if (arg & STATUS_NORMAL) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_driver, normal); + else if (arg & STATUS_INVERT) + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + status_driver, inverted); + break; + case SSP_SPI: + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, + disabled); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, + msb); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, + size8bit); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, + word); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, + normal); + if (arg & SPI_SLAVE) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_polarity, inverted); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_polarity, neg); + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + mode, SLAVE_INPUT); + } else { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + frame_driver, inverted); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + clk_driver, inverted); + SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, + mode, MASTER_OUTPUT); + } + break; + case SSP_INBUFCHUNK: +#if 0 + if (arg > port->in_buffer_size/NUM_IN_DESCR) + return -EINVAL; + port->inbufchunk = arg; + /* Make sure in_buffer_size is a multiple of inbufchunk */ + port->in_buffer_size = + (port->in_buffer_size/port->inbufchunk) * + port->inbufchunk; + DEBUG(printk(KERN_DEBUG "inbufchunk %i in_buffer_size: %i\n", + port->inbufchunk, port->in_buffer_size)); + if (port->use_dma) { + if (port->port_nbr == 0) { + RESET_DMA(9); + WAIT_DMA(9); + } else { + RESET_DMA(5); + WAIT_DMA(5); + } + start_dma_in(port); + } +#endif + break; + default: + return_val = -1; + } + /* Make sure we write the config without interruption */ + local_irq_save(flags); + /* Set config and enable port */ + *port->ctrl_data = port->ctrl_data_shadow; + nop(); nop(); nop(); nop(); + *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow; + nop(); nop(); nop(); nop(); + if (dev) + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); + else + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); + + *R_GEN_CONFIG_II = gen_config_ii_shadow; + /* Reset DMA. At readout from serial port the data could be shifted + * one byte if not resetting DMA. + */ + if (port->use_dma) { + if (port->port_nbr == 0) { + RESET_DMA(9); + WAIT_DMA(9); + } else { + RESET_DMA(5); + WAIT_DMA(5); + } + start_dma_in(port); + } + local_irq_restore(flags); + return return_val; +} + + +static ssize_t sync_serial_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) +{ + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + DECLARE_WAITQUEUE(wait, current); + struct sync_port *port; + unsigned long flags; + unsigned long c, c1; + unsigned long free_outp; + unsigned long outp; + unsigned long out_buffer; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + + DEBUGWRITE(printk(KERN_DEBUG "W d%d c %lu (%d/%d)\n", + port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE)); + /* Space to end of buffer */ + /* + * out_buffer 012345<- c ->OUT_BUFFER_SIZE + * outp^ +out_count + * ^free_outp + * out_buffer 45<- c ->0123OUT_BUFFER_SIZE + * +out_count outp^ + * free_outp + * + */ + + /* Read variables that may be updated by interrupts */ + local_irq_save(flags); + if (count > OUT_BUFFER_SIZE - port->out_count) + count = OUT_BUFFER_SIZE - port->out_count; + + outp = (unsigned long)port->outp; + free_outp = outp + port->out_count; + local_irq_restore(flags); + out_buffer = (unsigned long)port->out_buffer; + + /* Find out where and how much to write */ + if (free_outp >= out_buffer + OUT_BUFFER_SIZE) + free_outp -= OUT_BUFFER_SIZE; + if (free_outp >= outp) + c = out_buffer + OUT_BUFFER_SIZE - free_outp; + else + c = outp - free_outp; + if (c > count) + c = count; + + DEBUGWRITE(printk(KERN_DEBUG "w op %08lX fop %08lX c %lu\n", + outp, free_outp, c)); + if (copy_from_user((void *)free_outp, buf, c)) + return -EFAULT; + + if (c != count) { + buf += c; + c1 = count - c; + DEBUGWRITE(printk(KERN_DEBUG "w2 fi %lu c %lu c1 %lu\n", + free_outp-out_buffer, c, c1)); + if (copy_from_user((void *)out_buffer, buf, c1)) + return -EFAULT; + } + local_irq_save(flags); + port->out_count += count; + local_irq_restore(flags); + + /* Make sure transmitter/receiver is running */ + if (!port->started) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, + running); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, + enable); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, + enable); + port->started = 1; + } + + *port->ctrl_data = port->ctrl_data_shadow; + + if (file->f_flags & O_NONBLOCK) { + local_irq_save(flags); + if (!port->tr_running) { + if (!port->use_dma) { + /* Start sender by writing data */ + send_word(port); + /* and enable transmitter ready IRQ */ + *R_IRQ_MASK1_SET = 1 << + port->transmitter_ready_bit; + } else + start_dma(port, + (unsigned char *volatile)port->outp, c); + } + local_irq_restore(flags); + DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu NB\n", + port->port_nbr, count)); + return count; + } + + /* Sleep until all sent */ + add_wait_queue(&port->out_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + local_irq_save(flags); + if (!port->tr_running) { + if (!port->use_dma) { + /* Start sender by writing data */ + send_word(port); + /* and enable transmitter ready IRQ */ + *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit; + } else + start_dma(port, port->outp, c); + } + local_irq_restore(flags); + schedule(); + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->out_wait_q, &wait); + if (signal_pending(current)) + return -EINTR; + + DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu\n", port->port_nbr, count)); + return count; +} + +static ssize_t sync_serial_read(struct file *file, char *buf, + size_t count, loff_t *ppos) +{ + int dev = MINOR(file->f_dentry->d_inode->i_rdev); + int avail; + struct sync_port *port; + unsigned char *start; + unsigned char *end; + unsigned long flags; + + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { + DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); + return -ENODEV; + } + port = &ports[dev]; + + DEBUGREAD(printk(KERN_DEBUG "R%d c %d ri %lu wi %lu /%lu\n", + dev, count, port->readp - port->flip, + port->writep - port->flip, port->in_buffer_size)); + + if (!port->started) { + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, + running); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, + enable); + SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, + enable); + port->started = 1; + } + *port->ctrl_data = port->ctrl_data_shadow; + + /* Calculate number of available bytes */ + /* Save pointers to avoid that they are modified by interrupt */ + local_irq_save(flags); + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + local_irq_restore(flags); + while (start == end && !port->full) { + /* No data */ + if (file->f_flags & O_NONBLOCK) + return -EAGAIN; + + interruptible_sleep_on(&port->in_wait_q); + if (signal_pending(current)) + return -EINTR; + + local_irq_save(flags); + start = (unsigned char *)port->readp; /* cast away volatile */ + end = (unsigned char *)port->writep; /* cast away volatile */ + local_irq_restore(flags); + } + + /* Lazy read, never return wrapped data. */ + if (port->full) + avail = port->in_buffer_size; + else if (end > start) + avail = end - start; + else + avail = port->flip + port->in_buffer_size - start; + + count = count > avail ? avail : count; + if (copy_to_user(buf, start, count)) + return -EFAULT; + /* Disable interrupts while updating readp */ + local_irq_save(flags); + port->readp += count; + if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ + port->readp = port->flip; + port->full = 0; + local_irq_restore(flags); + DEBUGREAD(printk(KERN_DEBUG "r %d\n", count)); + return count; +} + +static void send_word(struct sync_port *port) +{ + switch (IO_EXTRACT(R_SYNC_SERIAL1_CTRL, wordsize, + port->ctrl_data_shadow)) { + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): + port->out_count--; + *port->data_out = *port->outp++; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): + { + int data = (*port->outp++) << 8; + data |= *port->outp++; + port->out_count -= 2; + *port->data_out = data; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + } + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): + port->out_count -= 2; + *port->data_out = *(unsigned short *)port->outp; + port->outp += 2; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): + port->out_count -= 3; + *port->data_out = *(unsigned int *)port->outp; + port->outp += 3; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): + port->out_count -= 4; + *port->data_out = *(unsigned int *)port->outp; + port->outp += 4; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + break; + } +} + + +static void start_dma(struct sync_port *port, const char *data, int count) +{ + port->tr_running = 1; + port->out_descr.hw_len = 0; + port->out_descr.next = 0; + port->out_descr.ctrl = d_eol | d_eop; /* No d_wait to avoid glitches */ + port->out_descr.sw_len = count; + port->out_descr.buf = virt_to_phys(data); + port->out_descr.status = 0; + + *port->output_dma_first = virt_to_phys(&port->out_descr); + *port->output_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); + DEBUGTXINT(printk(KERN_DEBUG "dma %08lX c %d\n", + (unsigned long)data, count)); +} + +static void start_dma_in(struct sync_port *port) +{ + int i; + unsigned long buf; + port->writep = port->flip; + + if (port->writep > port->flip + port->in_buffer_size) { + panic("Offset too large in sync serial driver\n"); + return; + } + buf = virt_to_phys(port->in_buffer); + for (i = 0; i < NUM_IN_DESCR; i++) { + port->in_descr[i].sw_len = port->inbufchunk; + port->in_descr[i].ctrl = d_int; + port->in_descr[i].next = virt_to_phys(&port->in_descr[i+1]); + port->in_descr[i].buf = buf; + port->in_descr[i].hw_len = 0; + port->in_descr[i].status = 0; + port->in_descr[i].fifo_len = 0; + buf += port->inbufchunk; + prepare_rx_descriptor(&port->in_descr[i]); + } + /* Link the last descriptor to the first */ + port->in_descr[i-1].next = virt_to_phys(&port->in_descr[0]); + port->in_descr[i-1].ctrl |= d_eol; + port->next_rx_desc = &port->in_descr[0]; + port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1]; + *port->input_dma_first = virt_to_phys(port->next_rx_desc); + *port->input_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); +} + +#ifdef SYNC_SER_DMA +static irqreturn_t tr_interrupt(int irq, void *dev_id) +{ + unsigned long ireg = *R_IRQ_MASK2_RD; + struct etrax_dma_descr *descr; + unsigned int sentl; + int handled = 0; + int i; + + for (i = 0; i < NUMBER_OF_PORTS; i++) { + struct sync_port *port = &ports[i]; + if (!port->enabled || !port->use_dma) + continue; + + /* IRQ active for the port? */ + if (!(ireg & (1 << port->output_dma_bit))) + continue; + + handled = 1; + + /* Clear IRQ */ + *port->output_dma_clr_irq = + IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do) | + IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do); + + descr = &port->out_descr; + if (!(descr->status & d_stop)) + sentl = descr->sw_len; + else + /* Otherwise find amount of data sent here */ + sentl = descr->hw_len; + + port->out_count -= sentl; + port->outp += sentl; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + if (port->out_count) { + int c = port->out_buffer + OUT_BUFFER_SIZE - port->outp; + if (c > port->out_count) + c = port->out_count; + DEBUGTXINT(printk(KERN_DEBUG + "tx_int DMAWRITE %i %i\n", sentl, c)); + start_dma(port, port->outp, c); + } else { + DEBUGTXINT(printk(KERN_DEBUG + "tx_int DMA stop %i\n", sentl)); + port->tr_running = 0; + } + /* wake up the waiting process */ + wake_up_interruptible(&port->out_wait_q); + } + return IRQ_RETVAL(handled); +} /* tr_interrupt */ + +static irqreturn_t rx_interrupt(int irq, void *dev_id) +{ + unsigned long ireg = *R_IRQ_MASK2_RD; + int i; + int handled = 0; + + for (i = 0; i < NUMBER_OF_PORTS; i++) { + struct sync_port *port = &ports[i]; + + if (!port->enabled || !port->use_dma) + continue; + + if (!(ireg & (1 << port->input_dma_descr_bit))) + continue; + + /* Descriptor interrupt */ + handled = 1; + while (*port->input_dma_descr != + virt_to_phys(port->next_rx_desc)) { + if (port->writep + port->inbufchunk > port->flip + + port->in_buffer_size) { + int first_size = port->flip + + port->in_buffer_size - port->writep; + memcpy(port->writep, + phys_to_virt(port->next_rx_desc->buf), + first_size); + memcpy(port->flip, + phys_to_virt(port->next_rx_desc->buf + + first_size), + port->inbufchunk - first_size); + port->writep = port->flip + + port->inbufchunk - first_size; + } else { + memcpy(port->writep, + phys_to_virt(port->next_rx_desc->buf), + port->inbufchunk); + port->writep += port->inbufchunk; + if (port->writep >= port->flip + + port->in_buffer_size) + port->writep = port->flip; + } + if (port->writep == port->readp) + port->full = 1; + prepare_rx_descriptor(port->next_rx_desc); + port->next_rx_desc->ctrl |= d_eol; + port->prev_rx_desc->ctrl &= ~d_eol; + port->prev_rx_desc = phys_to_virt((unsigned) + port->next_rx_desc); + port->next_rx_desc = phys_to_virt((unsigned) + port->next_rx_desc->next); + /* Wake up the waiting process */ + wake_up_interruptible(&port->in_wait_q); + *port->input_dma_cmd = IO_STATE(R_DMA_CH1_CMD, + cmd, restart); + /* DMA has reached end of descriptor */ + *port->input_dma_clr_irq = IO_STATE(R_DMA_CH0_CLR_INTR, + clr_descr, do); + } + } + return IRQ_RETVAL(handled); +} /* rx_interrupt */ +#endif /* SYNC_SER_DMA */ + +#ifdef SYNC_SER_MANUAL +static irqreturn_t manual_interrupt(int irq, void *dev_id) +{ + int i; + int handled = 0; + + for (i = 0; i < NUMBER_OF_PORTS; i++) { + struct sync_port *port = &ports[i]; + + if (!port->enabled || port->use_dma) + continue; + + /* Data received? */ + if (*R_IRQ_MASK1_RD & (1 << port->data_avail_bit)) { + handled = 1; + /* Read data */ + switch (port->ctrl_data_shadow & + IO_MASK(R_SYNC_SERIAL1_CTRL, wordsize)) { + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): + *port->writep++ = + *(volatile char *)port->data_in; + break; + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): + { + int data = *(unsigned short *)port->data_in; + *port->writep = (data & 0x0ff0) >> 4; + *(port->writep + 1) = data & 0x0f; + port->writep += 2; + break; + } + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): + *(unsigned short *)port->writep = + *(volatile unsigned short *)port->data_in; + port->writep += 2; + break; + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): + *(unsigned int *)port->writep = *port->data_in; + port->writep += 3; + break; + case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): + *(unsigned int *)port->writep = *port->data_in; + port->writep += 4; + break; + } + + /* Wrap? */ + if (port->writep >= port->flip + port->in_buffer_size) + port->writep = port->flip; + if (port->writep == port->readp) { + /* Receive buffer overrun, discard oldest */ + port->readp++; + /* Wrap? */ + if (port->readp >= port->flip + + port->in_buffer_size) + port->readp = port->flip; + } + if (sync_data_avail(port) >= port->inbufchunk) { + /* Wake up application */ + wake_up_interruptible(&port->in_wait_q); + } + } + + /* Transmitter ready? */ + if (*R_IRQ_MASK1_RD & (1 << port->transmitter_ready_bit)) { + if (port->out_count > 0) { + /* More data to send */ + send_word(port); + } else { + /* Transmission finished */ + /* Turn off IRQ */ + *R_IRQ_MASK1_CLR = 1 << + port->transmitter_ready_bit; + /* Wake up application */ + wake_up_interruptible(&port->out_wait_q); + } + } + } + return IRQ_RETVAL(handled); +} +#endif + +module_init(etrax_sync_serial_init); -- GitLab