diff --git a/Documentation/devicetree/bindings/video/ssd1307fb.txt b/Documentation/devicetree/bindings/video/ssd1307fb.txt
index 7a125427ff4bf88a8ef406222f6d1ce577d4fd6b..635efa3b2b2739624771b600e1da4c49b4364452 100644
--- a/Documentation/devicetree/bindings/video/ssd1307fb.txt
+++ b/Documentation/devicetree/bindings/video/ssd1307fb.txt
@@ -15,6 +15,16 @@ Required properties:
 
 Optional properties:
   - reset-active-low: Is the reset gpio is active on physical low?
+  - solomon,segment-no-remap: Display needs normal (non-inverted) data column
+                              to segment mapping
+  - solomon,com-seq: Display uses sequential COM pin configuration
+  - solomon,com-lrremap: Display uses left-right COM pin remap
+  - solomon,com-invdir: Display uses inverted COM pin scan direction
+  - solomon,com-offset: Number of the COM pin wired to the first display line
+  - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles.
+  - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles.
+                         This needs to be the higher, the higher the capacitance
+                         of the OLED's pixels is
 
 [0]: Documentation/devicetree/bindings/pwm/pwm.txt
 
@@ -26,3 +36,14 @@ ssd1307: oled@3c {
         reset-gpios = <&gpio2 7>;
         reset-active-low;
 };
+
+ssd1306: oled@3c {
+        compatible = "solomon,ssd1306fb-i2c";
+        reg = <0x3c>;
+        pwms = <&pwm 4 3000>;
+        reset-gpios = <&gpio2 7>;
+        reset-active-low;
+        solomon,com-lrremap;
+        solomon,com-invdir;
+        solomon,com-offset = <32>;
+};
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 8d34c5651187f1ab4e75bdb511dccefd76f6b1d5..8667c7769d8a95b5a2b24d8d165cc32a68c9f252 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -40,20 +40,34 @@
 
 struct ssd1307fb_par;
 
-struct ssd1307fb_ops {
-	int (*init)(struct ssd1307fb_par *);
-	int (*remove)(struct ssd1307fb_par *);
+struct ssd1307fb_deviceinfo {
+	u32 default_vcomh;
+	u32 default_dclk_div;
+	u32 default_dclk_frq;
+	int need_pwm;
+	int need_chargepump;
 };
 
 struct ssd1307fb_par {
+	u32 com_invdir;
+	u32 com_lrremap;
+	u32 com_offset;
+	u32 com_seq;
+	u32 contrast;
+	u32 dclk_div;
+	u32 dclk_frq;
+	struct ssd1307fb_deviceinfo *device_info;
 	struct i2c_client *client;
 	u32 height;
 	struct fb_info *info;
-	struct ssd1307fb_ops *ops;
 	u32 page_offset;
+	u32 prechargep1;
+	u32 prechargep2;
 	struct pwm_device *pwm;
 	u32 pwm_period;
 	int reset;
+	u32 seg_remap;
+	u32 vcomh;
 	u32 width;
 };
 
@@ -254,69 +268,46 @@ static struct fb_deferred_io ssd1307fb_defio = {
 	.deferred_io	= ssd1307fb_deferred_io,
 };
 
-static int ssd1307fb_ssd1307_init(struct ssd1307fb_par *par)
+static int ssd1307fb_init(struct ssd1307fb_par *par)
 {
 	int ret;
+	u32 precharge, dclk, com_invdir, compins;
 
-	par->pwm = pwm_get(&par->client->dev, NULL);
-	if (IS_ERR(par->pwm)) {
-		dev_err(&par->client->dev, "Could not get PWM from device tree!\n");
-		return PTR_ERR(par->pwm);
-	}
-
-	par->pwm_period = pwm_get_period(par->pwm);
-	/* Enable the PWM */
-	pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
-	pwm_enable(par->pwm);
-
-	dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
-		par->pwm->pwm, par->pwm_period);
-
-	/* Map column 127 of the OLED to segment 0 */
-	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
-	if (ret < 0)
-		return ret;
-
-	/* Turn on the display */
-	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
+	if (par->device_info->need_pwm) {
+		par->pwm = pwm_get(&par->client->dev, NULL);
+		if (IS_ERR(par->pwm)) {
+			dev_err(&par->client->dev, "Could not get PWM from device tree!\n");
+			return PTR_ERR(par->pwm);
+		}
 
-static int ssd1307fb_ssd1307_remove(struct ssd1307fb_par *par)
-{
-	pwm_disable(par->pwm);
-	pwm_put(par->pwm);
-	return 0;
-}
+		par->pwm_period = pwm_get_period(par->pwm);
+		/* Enable the PWM */
+		pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
+		pwm_enable(par->pwm);
 
-static struct ssd1307fb_ops ssd1307fb_ssd1307_ops = {
-	.init	= ssd1307fb_ssd1307_init,
-	.remove	= ssd1307fb_ssd1307_remove,
-};
-
-static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
-{
-	int ret;
+		dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
+			par->pwm->pwm, par->pwm_period);
+	};
 
 	/* Set initial contrast */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x7f);
-	if (ret < 0)
-		return ret;
-
-	/* Set COM direction */
-	ret = ssd1307fb_write_cmd(par->client, 0xc8);
+	ret = ssd1307fb_write_cmd(par->client, par->contrast);
 	if (ret < 0)
 		return ret;
 
 	/* Set segment re-map */
-	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
+	if (par->seg_remap) {
+		ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
+		if (ret < 0)
+			return ret;
+	};
+
+	/* Set COM direction */
+	com_invdir = 0xc0 | (par->com_invdir & 0x1) << 3;
+	ret = ssd1307fb_write_cmd(par->client,  com_invdir);
 	if (ret < 0)
 		return ret;
 
@@ -334,7 +325,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x20);
+	ret = ssd1307fb_write_cmd(par->client, par->com_offset);
 	if (ret < 0)
 		return ret;
 
@@ -343,7 +334,8 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0xf0);
+	dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4;
+	ret = ssd1307fb_write_cmd(par->client, dclk);
 	if (ret < 0)
 		return ret;
 
@@ -352,7 +344,8 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x22);
+	precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4;
+	ret = ssd1307fb_write_cmd(par->client, precharge);
 	if (ret < 0)
 		return ret;
 
@@ -361,7 +354,9 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x22);
+	compins = 0x02 | (!par->com_seq & 0x1) << 4
+				   | (par->com_lrremap & 0x1) << 5;
+	ret = ssd1307fb_write_cmd(par->client, compins);
 	if (ret < 0)
 		return ret;
 
@@ -370,7 +365,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x49);
+	ret = ssd1307fb_write_cmd(par->client, par->vcomh);
 	if (ret < 0)
 		return ret;
 
@@ -379,7 +374,8 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x14);
+	ret = ssd1307fb_write_cmd(par->client,
+		(par->device_info->need_chargepump & 0x1 << 2) & 0x14);
 	if (ret < 0)
 		return ret;
 
@@ -393,6 +389,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
+	/* Set column range */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
 	if (ret < 0)
 		return ret;
@@ -405,6 +402,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
+	/* Set page range */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
 	if (ret < 0)
 		return ret;
@@ -426,18 +424,28 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 	return 0;
 }
 
-static struct ssd1307fb_ops ssd1307fb_ssd1306_ops = {
-	.init	= ssd1307fb_ssd1306_init,
+static struct ssd1307fb_deviceinfo ssd1307fb_ssd1306_deviceinfo = {
+	.default_vcomh = 0x20,
+	.default_dclk_div = 1,
+	.default_dclk_frq = 8,
+	.need_chargepump = 1,
+};
+
+static struct ssd1307fb_deviceinfo ssd1307fb_ssd1307_deviceinfo = {
+	.default_vcomh = 0x20,
+	.default_dclk_div = 2,
+	.default_dclk_frq = 12,
+	.need_pwm = 1,
 };
 
 static const struct of_device_id ssd1307fb_of_match[] = {
 	{
 		.compatible = "solomon,ssd1306fb-i2c",
-		.data = (void *)&ssd1307fb_ssd1306_ops,
+		.data = (void *)&ssd1307fb_ssd1306_deviceinfo,
 	},
 	{
 		.compatible = "solomon,ssd1307fb-i2c",
-		.data = (void *)&ssd1307fb_ssd1307_ops,
+		.data = (void *)&ssd1307fb_ssd1307_deviceinfo,
 	},
 	{},
 };
@@ -468,8 +476,8 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	par->info = info;
 	par->client = client;
 
-	par->ops = (struct ssd1307fb_ops *)of_match_device(ssd1307fb_of_match,
-							   &client->dev)->data;
+	par->device_info = (struct ssd1307fb_deviceinfo *)of_match_device(
+			ssd1307fb_of_match, &client->dev)->data;
 
 	par->reset = of_get_named_gpio(client->dev.of_node,
 					 "reset-gpios", 0);
@@ -487,6 +495,27 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset))
 		par->page_offset = 1;
 
+	if (of_property_read_u32(node, "solomon,com-offset", &par->com_offset))
+		par->com_offset = 0;
+
+	if (of_property_read_u32(node, "solomon,prechargep1", &par->prechargep1))
+		par->prechargep1 = 2;
+
+	if (of_property_read_u32(node, "solomon,prechargep2", &par->prechargep2))
+		par->prechargep2 = 2;
+
+	par->seg_remap = !of_property_read_bool(node, "solomon,segment-no-remap");
+	par->com_seq = of_property_read_bool(node, "solomon,com-seq");
+	par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap");
+	par->com_invdir = of_property_read_bool(node, "solomon,com-invdir");
+
+	par->contrast = 127;
+	par->vcomh = par->device_info->default_vcomh;
+
+	/* Setup display timing */
+	par->dclk_div = par->device_info->default_dclk_div;
+	par->dclk_frq = par->device_info->default_dclk_frq;
+
 	vmem_size = par->width * par->height / 8;
 
 	vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
@@ -539,11 +568,9 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	gpio_set_value(par->reset, 1);
 	udelay(4);
 
-	if (par->ops->init) {
-		ret = par->ops->init(par);
-		if (ret)
-			goto reset_oled_error;
-	}
+	ret = ssd1307fb_init(par);
+	if (ret)
+		goto reset_oled_error;
 
 	ret = register_framebuffer(info);
 	if (ret) {
@@ -556,8 +583,10 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	return 0;
 
 panel_init_error:
-	if (par->ops->remove)
-		par->ops->remove(par);
+	if (par->device_info->need_pwm) {
+		pwm_disable(par->pwm);
+		pwm_put(par->pwm);
+	};
 reset_oled_error:
 	fb_deferred_io_cleanup(info);
 fb_alloc_error:
@@ -571,8 +600,10 @@ static int ssd1307fb_remove(struct i2c_client *client)
 	struct ssd1307fb_par *par = info->par;
 
 	unregister_framebuffer(info);
-	if (par->ops->remove)
-		par->ops->remove(par);
+	if (par->device_info->need_pwm) {
+		pwm_disable(par->pwm);
+		pwm_put(par->pwm);
+	};
 	fb_deferred_io_cleanup(info);
 	__free_pages(__va(info->fix.smem_start), get_order(info->fix.smem_len));
 	framebuffer_release(info);