diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index acfb01b8ec829294c38471040f62d02bf158efdf..048295ec370786aae9b04b900402103e29c72df8 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -257,6 +257,15 @@ static int acpi_hibernation_enter(void)
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
 
+static void acpi_hibernation_leave(void)
+{
+	/*
+	 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
+	 * enable it here.
+	 */
+	acpi_enable();
+}
+
 static void acpi_hibernation_finish(void)
 {
 	acpi_leave_sleep_state(ACPI_STATE_S4);
@@ -288,6 +297,7 @@ static struct platform_hibernation_ops acpi_hibernation_ops = {
 	.finish = acpi_hibernation_finish,
 	.prepare = acpi_hibernation_prepare,
 	.enter = acpi_hibernation_enter,
+	.leave = acpi_hibernation_leave,
 	.pre_restore = acpi_hibernation_pre_restore,
 	.restore_cleanup = acpi_hibernation_restore_cleanup,
 };
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 9fd2b9acf7d9322ba95cb39a35d94e433cd3a81c..4360e0816956e536d929d7fffd23fedaab14fd46 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -156,6 +156,12 @@ extern void mark_free_pages(struct zone *zone);
  *	Called after the nonboot CPUs have been disabled and all of the low
  *	level devices have been shut down (runs with IRQs off).
  *
+ * @leave: Perform the first stage of the cleanup after the system sleep state
+ *	indicated by @set_target() has been left.
+ *	Called right after the control has been passed from the boot kernel to
+ *	the image kernel, before the nonboot CPUs are enabled and before devices
+ *	are resumed.  Executed with interrupts disabled.
+ *
  * @pre_restore: Prepare system for the restoration from a hibernation image.
  *	Called right after devices have been frozen and before the nonboot
  *	CPUs are disabled (runs with IRQs on).
@@ -170,6 +176,7 @@ struct platform_hibernation_ops {
 	void (*finish)(void);
 	int (*prepare)(void);
 	int (*enter)(void);
+	void (*leave)(void);
 	int (*pre_restore)(void);
 	void (*restore_cleanup)(void);
 };
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 555c0f0b2f7eaa20110b57064cb5f701b4e764df..e50f4da18fd56ed64f8012039e224784f209a2cf 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -92,6 +92,17 @@ static int platform_pre_snapshot(int platform_mode)
 		hibernation_ops->pre_snapshot() : 0;
 }
 
+/**
+ *	platform_leave - prepare the machine for switching to the normal mode
+ *	of operation using the platform driver (called with interrupts disabled)
+ */
+
+static void platform_leave(int platform_mode)
+{
+	if (platform_mode && hibernation_ops)
+		hibernation_ops->leave();
+}
+
 /**
  *	platform_finish - switch the machine to the normal mode of operation
  *	using the platform driver (must be called after platform_prepare())
@@ -128,6 +139,51 @@ static void platform_restore_cleanup(int platform_mode)
 		hibernation_ops->restore_cleanup();
 }
 
+/**
+ *	create_image - freeze devices that need to be frozen with interrupts
+ *	off, create the hibernation image and thaw those devices.  Control
+ *	reappears in this routine after a restore.
+ */
+
+int create_image(int platform_mode)
+{
+	int error;
+
+	error = arch_prepare_suspend();
+	if (error)
+		return error;
+
+	local_irq_disable();
+	/* At this point, device_suspend() has been called, but *not*
+	 * device_power_down(). We *must* call device_power_down() now.
+	 * Otherwise, drivers for some devices (e.g. interrupt controllers)
+	 * become desynchronized with the actual state of the hardware
+	 * at resume time, and evil weirdness ensues.
+	 */
+	error = device_power_down(PMSG_FREEZE);
+	if (error) {
+		printk(KERN_ERR "Some devices failed to power down, "
+			KERN_ERR "aborting suspend\n");
+		goto Enable_irqs;
+	}
+
+	save_processor_state();
+	error = swsusp_arch_suspend();
+	if (error)
+		printk(KERN_ERR "Error %d while creating the image\n", error);
+	/* Restore control flow magically appears here */
+	restore_processor_state();
+	if (!in_suspend)
+		platform_leave(platform_mode);
+	/* NOTE:  device_power_up() is just a resume() for devices
+	 * that suspended with irqs off ... no overall powerup.
+	 */
+	device_power_up();
+ Enable_irqs:
+	local_irq_enable();
+	return error;
+}
+
 /**
  *	hibernation_snapshot - quiesce devices and create the hibernation
  *	snapshot image.
@@ -163,7 +219,7 @@ int hibernation_snapshot(int platform_mode)
 	if (!error) {
 		if (hibernation_mode != HIBERNATION_TEST) {
 			in_suspend = 1;
-			error = swsusp_suspend();
+			error = create_image(platform_mode);
 			/* Control returns here after successful restore */
 		} else {
 			printk("swsusp debug: Waiting for 5 seconds.\n");
diff --git a/kernel/power/power.h b/kernel/power/power.h
index a0204dfc6c4cf054f4d11074c5266e9ebf35bc31..195dc4611764b08a65780976a6231aaf004889fe 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -183,7 +183,6 @@ extern int swsusp_swap_in_use(void);
 extern int swsusp_check(void);
 extern int swsusp_shrink_memory(void);
 extern void swsusp_free(void);
-extern int swsusp_suspend(void);
 extern int swsusp_resume(void);
 extern int swsusp_read(unsigned int *flags_p);
 extern int swsusp_write(unsigned int flags);
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index 5da304c8f1f66473233d68d713a66e2a17c59d54..e1722d3155f17057284ab6374b3a00b9a31ed1d2 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -270,39 +270,6 @@ int swsusp_shrink_memory(void)
 	return 0;
 }
 
-int swsusp_suspend(void)
-{
-	int error;
-
-	if ((error = arch_prepare_suspend()))
-		return error;
-
-	local_irq_disable();
-	/* At this point, device_suspend() has been called, but *not*
-	 * device_power_down(). We *must* device_power_down() now.
-	 * Otherwise, drivers for some devices (e.g. interrupt controllers)
-	 * become desynchronized with the actual state of the hardware
-	 * at resume time, and evil weirdness ensues.
-	 */
-	if ((error = device_power_down(PMSG_FREEZE))) {
-		printk(KERN_ERR "Some devices failed to power down, aborting suspend\n");
-		goto Enable_irqs;
-	}
-
-	save_processor_state();
-	if ((error = swsusp_arch_suspend()))
-		printk(KERN_ERR "Error %d suspending\n", error);
-	/* Restore control flow magically appears here */
-	restore_processor_state();
-	/* NOTE:  device_power_up() is just a resume() for devices
-	 * that suspended with irqs off ... no overall powerup.
-	 */
-	device_power_up();
- Enable_irqs:
-	local_irq_enable();
-	return error;
-}
-
 int swsusp_resume(void)
 {
 	int error;