提交 c791c036 编写于 作者: G Guennadi Liakhovetski 提交者: Simon Horman

ARM: shmobile: kzm9g: SDHI0 and SDHI1 use a 3.3V power supply

kzm9g supplies 3.3V to its SDHI0 and SDHI2 interfaces. Specifying 2.8V
prevents some (e.g. certain SDIO) cards from working. This patch fixes the
voltage and removes redundant OCR masks from platform data.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
上级 48296a13
......@@ -36,11 +36,11 @@
regulator-boot-on;
};
reg_2p8v: regulator@1 {
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "fixed-2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
......@@ -52,7 +52,7 @@
interrupts = <0 83 4
0 84 4
0 85 4>;
vmmc-supply = <&reg_2p8v>;
vmmc-supply = <&reg_3p3v>;
bus-width = <4>;
toshiba,mmc-has-idle-wait;
};
......@@ -63,7 +63,7 @@
interrupt-parent = <&gic>;
interrupts = <0 104 4
0 105 4>;
vmmc-supply = <&reg_2p8v>;
vmmc-supply = <&reg_3p3v>;
bus-width = <4>;
broken-cd;
toshiba,mmc-wrprotect-disable;
......
......@@ -375,8 +375,8 @@ static struct platform_device mmc_device = {
.resource = sh_mmcif_resources,
};
/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */
static struct regulator_consumer_supply fixed2v8_power_consumers[] =
/* Fixed 3.3V regulators to be used by SDHI0 and SDHI2 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
......@@ -390,7 +390,6 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
};
static struct resource sdhi0_resources[] = {
......@@ -434,7 +433,6 @@ static struct sh_mobile_sdhi_info sdhi2_info = {
TMIO_MMC_USE_GPIO_CD |
TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.cd_gpio = 13,
};
......@@ -716,8 +714,8 @@ static void __init kzm_init(void)
{
regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
ARRAY_SIZE(fixed2v8_power_consumers), 2800000);
regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册