From c70f4abef07a99db6654be4f1190bacd69aa4365 Mon Sep 17 00:00:00 2001 From: Martin Willi Date: Thu, 16 Jul 2015 19:14:06 +0200 Subject: [PATCH] crypto: poly1305 - Add a SSE2 SIMD variant for x86_64 Implements an x86_64 assembler driver for the Poly1305 authenticator. This single block variant holds the 130-bit integer in 5 32-bit words, but uses SSE to do two multiplications/additions in parallel. When calling updates with small blocks, the overhead for kernel_fpu_begin/ kernel_fpu_end() negates the perfmance gain. We therefore use the poly1305-generic fallback for small updates. For large messages, throughput increases by ~5-10% compared to poly1305-generic: testing speed of poly1305 (poly1305-generic) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 4080026 opers/sec, 391682496 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 6221094 opers/sec, 597225024 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9609750 opers/sec, 922536057 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1459379 opers/sec, 420301267 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2115179 opers/sec, 609171609 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3729874 opers/sec, 1074203856 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 593000 opers/sec, 626208000 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1081536 opers/sec, 1142102332 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 302077 opers/sec, 628320576 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 554384 opers/sec, 1153120176 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 278715 opers/sec, 1150536345 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 140202 opers/sec, 1153022070 bytes/sec testing speed of poly1305 (poly1305-simd) test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3790063 opers/sec, 363846076 bytes/sec test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5913378 opers/sec, 567684355 bytes/sec test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9352574 opers/sec, 897847104 bytes/sec test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1362145 opers/sec, 392297990 bytes/sec test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2007075 opers/sec, 578037628 bytes/sec test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3709811 opers/sec, 1068425798 bytes/sec test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 566272 opers/sec, 597984182 bytes/sec test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1111657 opers/sec, 1173910108 bytes/sec test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 288857 opers/sec, 600823808 bytes/sec test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 590746 opers/sec, 1228751888 bytes/sec test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 301825 opers/sec, 1245936902 bytes/sec test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 153075 opers/sec, 1258896201 bytes/sec Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi Signed-off-by: Herbert Xu --- arch/x86/crypto/Makefile | 2 + arch/x86/crypto/poly1305-sse2-x86_64.S | 276 +++++++++++++++++++++++++ arch/x86/crypto/poly1305_glue.c | 123 +++++++++++ crypto/Kconfig | 12 ++ 4 files changed, 413 insertions(+) create mode 100644 arch/x86/crypto/poly1305-sse2-x86_64.S create mode 100644 arch/x86/crypto/poly1305_glue.c diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index ce39b3c872b1..5cf405c1e310 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_CRYPTO_CRC32_PCLMUL) += crc32-pclmul.o obj-$(CONFIG_CRYPTO_SHA256_SSSE3) += sha256-ssse3.o obj-$(CONFIG_CRYPTO_SHA512_SSSE3) += sha512-ssse3.o obj-$(CONFIG_CRYPTO_CRCT10DIF_PCLMUL) += crct10dif-pclmul.o +obj-$(CONFIG_CRYPTO_POLY1305_X86_64) += poly1305-x86_64.o # These modules require assembler to support AVX. ifeq ($(avx_supported),yes) @@ -85,6 +86,7 @@ aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o fpu.o aesni-intel-$(CONFIG_64BIT) += aesni-intel_avx-x86_64.o aes_ctrby8_avx-x86_64.o ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o sha1-ssse3-y := sha1_ssse3_asm.o sha1_ssse3_glue.o +poly1305-x86_64-y := poly1305-sse2-x86_64.o poly1305_glue.o ifeq ($(avx2_supported),yes) sha1-ssse3-y += sha1_avx2_x86_64_asm.o endif diff --git a/arch/x86/crypto/poly1305-sse2-x86_64.S b/arch/x86/crypto/poly1305-sse2-x86_64.S new file mode 100644 index 000000000000..a3d2b5e05f5e --- /dev/null +++ b/arch/x86/crypto/poly1305-sse2-x86_64.S @@ -0,0 +1,276 @@ +/* + * Poly1305 authenticator algorithm, RFC7539, x64 SSE2 functions + * + * Copyright (C) 2015 Martin Willi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include + +.data +.align 16 + +ANMASK: .octa 0x0000000003ffffff0000000003ffffff + +.text + +#define h0 0x00(%rdi) +#define h1 0x04(%rdi) +#define h2 0x08(%rdi) +#define h3 0x0c(%rdi) +#define h4 0x10(%rdi) +#define r0 0x00(%rdx) +#define r1 0x04(%rdx) +#define r2 0x08(%rdx) +#define r3 0x0c(%rdx) +#define r4 0x10(%rdx) +#define s1 0x00(%rsp) +#define s2 0x04(%rsp) +#define s3 0x08(%rsp) +#define s4 0x0c(%rsp) +#define m %rsi +#define h01 %xmm0 +#define h23 %xmm1 +#define h44 %xmm2 +#define t1 %xmm3 +#define t2 %xmm4 +#define t3 %xmm5 +#define t4 %xmm6 +#define mask %xmm7 +#define d0 %r8 +#define d1 %r9 +#define d2 %r10 +#define d3 %r11 +#define d4 %r12 + +ENTRY(poly1305_block_sse2) + # %rdi: Accumulator h[5] + # %rsi: 16 byte input block m + # %rdx: Poly1305 key r[5] + # %rcx: Block count + + # This single block variant tries to improve performance by doing two + # multiplications in parallel using SSE instructions. There is quite + # some quardword packing involved, hence the speedup is marginal. + + push %rbx + push %r12 + sub $0x10,%rsp + + # s1..s4 = r1..r4 * 5 + mov r1,%eax + lea (%eax,%eax,4),%eax + mov %eax,s1 + mov r2,%eax + lea (%eax,%eax,4),%eax + mov %eax,s2 + mov r3,%eax + lea (%eax,%eax,4),%eax + mov %eax,s3 + mov r4,%eax + lea (%eax,%eax,4),%eax + mov %eax,s4 + + movdqa ANMASK(%rip),mask + +.Ldoblock: + # h01 = [0, h1, 0, h0] + # h23 = [0, h3, 0, h2] + # h44 = [0, h4, 0, h4] + movd h0,h01 + movd h1,t1 + movd h2,h23 + movd h3,t2 + movd h4,h44 + punpcklqdq t1,h01 + punpcklqdq t2,h23 + punpcklqdq h44,h44 + + # h01 += [ (m[3-6] >> 2) & 0x3ffffff, m[0-3] & 0x3ffffff ] + movd 0x00(m),t1 + movd 0x03(m),t2 + psrld $2,t2 + punpcklqdq t2,t1 + pand mask,t1 + paddd t1,h01 + # h23 += [ (m[9-12] >> 6) & 0x3ffffff, (m[6-9] >> 4) & 0x3ffffff ] + movd 0x06(m),t1 + movd 0x09(m),t2 + psrld $4,t1 + psrld $6,t2 + punpcklqdq t2,t1 + pand mask,t1 + paddd t1,h23 + # h44 += [ (m[12-15] >> 8) | (1 << 24), (m[12-15] >> 8) | (1 << 24) ] + mov 0x0c(m),%eax + shr $8,%eax + or $0x01000000,%eax + movd %eax,t1 + pshufd $0xc4,t1,t1 + paddd t1,h44 + + # t1[0] = h0 * r0 + h2 * s3 + # t1[1] = h1 * s4 + h3 * s2 + movd r0,t1 + movd s4,t2 + punpcklqdq t2,t1 + pmuludq h01,t1 + movd s3,t2 + movd s2,t3 + punpcklqdq t3,t2 + pmuludq h23,t2 + paddq t2,t1 + # t2[0] = h0 * r1 + h2 * s4 + # t2[1] = h1 * r0 + h3 * s3 + movd r1,t2 + movd r0,t3 + punpcklqdq t3,t2 + pmuludq h01,t2 + movd s4,t3 + movd s3,t4 + punpcklqdq t4,t3 + pmuludq h23,t3 + paddq t3,t2 + # t3[0] = h4 * s1 + # t3[1] = h4 * s2 + movd s1,t3 + movd s2,t4 + punpcklqdq t4,t3 + pmuludq h44,t3 + # d0 = t1[0] + t1[1] + t3[0] + # d1 = t2[0] + t2[1] + t3[1] + movdqa t1,t4 + punpcklqdq t2,t4 + punpckhqdq t2,t1 + paddq t4,t1 + paddq t3,t1 + movq t1,d0 + psrldq $8,t1 + movq t1,d1 + + # t1[0] = h0 * r2 + h2 * r0 + # t1[1] = h1 * r1 + h3 * s4 + movd r2,t1 + movd r1,t2 + punpcklqdq t2,t1 + pmuludq h01,t1 + movd r0,t2 + movd s4,t3 + punpcklqdq t3,t2 + pmuludq h23,t2 + paddq t2,t1 + # t2[0] = h0 * r3 + h2 * r1 + # t2[1] = h1 * r2 + h3 * r0 + movd r3,t2 + movd r2,t3 + punpcklqdq t3,t2 + pmuludq h01,t2 + movd r1,t3 + movd r0,t4 + punpcklqdq t4,t3 + pmuludq h23,t3 + paddq t3,t2 + # t3[0] = h4 * s3 + # t3[1] = h4 * s4 + movd s3,t3 + movd s4,t4 + punpcklqdq t4,t3 + pmuludq h44,t3 + # d2 = t1[0] + t1[1] + t3[0] + # d3 = t2[0] + t2[1] + t3[1] + movdqa t1,t4 + punpcklqdq t2,t4 + punpckhqdq t2,t1 + paddq t4,t1 + paddq t3,t1 + movq t1,d2 + psrldq $8,t1 + movq t1,d3 + + # t1[0] = h0 * r4 + h2 * r2 + # t1[1] = h1 * r3 + h3 * r1 + movd r4,t1 + movd r3,t2 + punpcklqdq t2,t1 + pmuludq h01,t1 + movd r2,t2 + movd r1,t3 + punpcklqdq t3,t2 + pmuludq h23,t2 + paddq t2,t1 + # t3[0] = h4 * r0 + movd r0,t3 + pmuludq h44,t3 + # d4 = t1[0] + t1[1] + t3[0] + movdqa t1,t4 + psrldq $8,t4 + paddq t4,t1 + paddq t3,t1 + movq t1,d4 + + # d1 += d0 >> 26 + mov d0,%rax + shr $26,%rax + add %rax,d1 + # h0 = d0 & 0x3ffffff + mov d0,%rbx + and $0x3ffffff,%ebx + + # d2 += d1 >> 26 + mov d1,%rax + shr $26,%rax + add %rax,d2 + # h1 = d1 & 0x3ffffff + mov d1,%rax + and $0x3ffffff,%eax + mov %eax,h1 + + # d3 += d2 >> 26 + mov d2,%rax + shr $26,%rax + add %rax,d3 + # h2 = d2 & 0x3ffffff + mov d2,%rax + and $0x3ffffff,%eax + mov %eax,h2 + + # d4 += d3 >> 26 + mov d3,%rax + shr $26,%rax + add %rax,d4 + # h3 = d3 & 0x3ffffff + mov d3,%rax + and $0x3ffffff,%eax + mov %eax,h3 + + # h0 += (d4 >> 26) * 5 + mov d4,%rax + shr $26,%rax + lea (%eax,%eax,4),%eax + add %eax,%ebx + # h4 = d4 & 0x3ffffff + mov d4,%rax + and $0x3ffffff,%eax + mov %eax,h4 + + # h1 += h0 >> 26 + mov %ebx,%eax + shr $26,%eax + add %eax,h1 + # h0 = h0 & 0x3ffffff + andl $0x3ffffff,%ebx + mov %ebx,h0 + + add $0x10,m + dec %rcx + jnz .Ldoblock + + add $0x10,%rsp + pop %r12 + pop %rbx + ret +ENDPROC(poly1305_block_sse2) diff --git a/arch/x86/crypto/poly1305_glue.c b/arch/x86/crypto/poly1305_glue.c new file mode 100644 index 000000000000..1e59274a0af3 --- /dev/null +++ b/arch/x86/crypto/poly1305_glue.c @@ -0,0 +1,123 @@ +/* + * Poly1305 authenticator algorithm, RFC7539, SIMD glue code + * + * Copyright (C) 2015 Martin Willi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +asmlinkage void poly1305_block_sse2(u32 *h, const u8 *src, + const u32 *r, unsigned int blocks); + +static unsigned int poly1305_simd_blocks(struct poly1305_desc_ctx *dctx, + const u8 *src, unsigned int srclen) +{ + unsigned int blocks, datalen; + + if (unlikely(!dctx->sset)) { + datalen = crypto_poly1305_setdesckey(dctx, src, srclen); + src += srclen - datalen; + srclen = datalen; + } + + if (srclen >= POLY1305_BLOCK_SIZE) { + blocks = srclen / POLY1305_BLOCK_SIZE; + poly1305_block_sse2(dctx->h, src, dctx->r, blocks); + srclen -= POLY1305_BLOCK_SIZE * blocks; + } + return srclen; +} + +static int poly1305_simd_update(struct shash_desc *desc, + const u8 *src, unsigned int srclen) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + unsigned int bytes; + + /* kernel_fpu_begin/end is costly, use fallback for small updates */ + if (srclen <= 288 || !may_use_simd()) + return crypto_poly1305_update(desc, src, srclen); + + kernel_fpu_begin(); + + if (unlikely(dctx->buflen)) { + bytes = min(srclen, POLY1305_BLOCK_SIZE - dctx->buflen); + memcpy(dctx->buf + dctx->buflen, src, bytes); + src += bytes; + srclen -= bytes; + dctx->buflen += bytes; + + if (dctx->buflen == POLY1305_BLOCK_SIZE) { + poly1305_simd_blocks(dctx, dctx->buf, + POLY1305_BLOCK_SIZE); + dctx->buflen = 0; + } + } + + if (likely(srclen >= POLY1305_BLOCK_SIZE)) { + bytes = poly1305_simd_blocks(dctx, src, srclen); + src += srclen - bytes; + srclen = bytes; + } + + kernel_fpu_end(); + + if (unlikely(srclen)) { + dctx->buflen = srclen; + memcpy(dctx->buf, src, srclen); + } + + return 0; +} + +static struct shash_alg alg = { + .digestsize = POLY1305_DIGEST_SIZE, + .init = crypto_poly1305_init, + .update = poly1305_simd_update, + .final = crypto_poly1305_final, + .setkey = crypto_poly1305_setkey, + .descsize = sizeof(struct poly1305_desc_ctx), + .base = { + .cra_name = "poly1305", + .cra_driver_name = "poly1305-simd", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_alignmask = sizeof(u32) - 1, + .cra_blocksize = POLY1305_BLOCK_SIZE, + .cra_module = THIS_MODULE, + }, +}; + +static int __init poly1305_simd_mod_init(void) +{ + if (!cpu_has_xmm2) + return -ENODEV; + + return crypto_register_shash(&alg); +} + +static void __exit poly1305_simd_mod_exit(void) +{ + crypto_unregister_shash(&alg); +} + +module_init(poly1305_simd_mod_init); +module_exit(poly1305_simd_mod_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Martin Willi "); +MODULE_DESCRIPTION("Poly1305 authenticator"); +MODULE_ALIAS_CRYPTO("poly1305"); +MODULE_ALIAS_CRYPTO("poly1305-simd"); diff --git a/crypto/Kconfig b/crypto/Kconfig index 82caab0e8256..c57478c0be92 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -470,6 +470,18 @@ config CRYPTO_POLY1305 It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use in IETF protocols. This is the portable C implementation of Poly1305. +config CRYPTO_POLY1305_X86_64 + tristate "Poly1305 authenticator algorithm (x86_64/SSE2)" + depends on X86 && 64BIT + select CRYPTO_POLY1305 + help + Poly1305 authenticator algorithm, RFC7539. + + Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein. + It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use + in IETF protocols. This is the x86_64 assembler implementation using SIMD + instructions. + config CRYPTO_MD4 tristate "MD4 digest algorithm" select CRYPTO_HASH -- GitLab