From c519a5a7dab2d8e9a114f003e2d369bcf8e913f3 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 19 Mar 2010 14:56:27 -0600 Subject: [PATCH] PCI: complain about devices that seem to be broken If we can tell that a device isn't working correctly, we should tell the user to make debugging easier. Otherwise, it can take a lot of work to determine whether the problem is in the driver, PCMCIA, PCI, hardware, etc., as in http://bugzilla.kernel.org/show_bug.cgi?id=12006 Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index c82548afcd5c..882bd8d29fe3 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -174,14 +174,19 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pci_read_config_dword(dev, pos, &sz); pci_write_config_dword(dev, pos, l); + if (!sz) + goto fail; /* BAR not implemented */ + /* * All bits set in sz means the device isn't working properly. - * If the BAR isn't implemented, all bits must be 0. If it's a - * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit - * 1 must be clear. + * If it's a memory BAR or a ROM, bit 0 must be clear; if it's + * an io BAR, bit 1 must be clear. */ - if (!sz || sz == 0xffffffff) + if (sz == 0xffffffff) { + dev_err(&dev->dev, "reg %x: invalid size %#x; broken device?\n", + pos, sz); goto fail; + } /* * I don't know how l can have all bits set. Copied from old code. @@ -244,13 +249,17 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pos, res); } } else { - sz = pci_size(l, sz, mask); + u32 size = pci_size(l, sz, mask); - if (!sz) + if (!size) { + dev_err(&dev->dev, "reg %x: invalid size " + "(l %#x sz %#x mask %#x); broken device?", + pos, l, sz, mask); goto fail; + } res->start = l; - res->end = l + sz; + res->end = l + size; dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } -- GitLab