From c36167de652f8acdf0b374c78805e662646cd327 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 17 Oct 2008 18:09:15 +0200 Subject: [PATCH] ide: remove dead It has been dead for more than 3 years and needs to be converted to use platform PATA support anyway. Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/arm/mach-sa1100/include/mach/ide.h | 75 ------------------------- 1 file changed, 75 deletions(-) delete mode 100644 arch/arm/mach-sa1100/include/mach/ide.h diff --git a/arch/arm/mach-sa1100/include/mach/ide.h b/arch/arm/mach-sa1100/include/mach/ide.h deleted file mode 100644 index 4c99c8f5e617..000000000000 --- a/arch/arm/mach-sa1100/include/mach/ide.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/ide.h - * - * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre - * - * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * Get rid of the special ide_init_hwif_ports() functions - * and make a generalised function that can be used by all - * architectures. - */ - -#include -#include -#include - -#error "This code is broken and needs update to match with current ide support" - - -/* - * Set up a hw structure for a specified data port, control port and IRQ. - * This should follow whatever the default interface uses. - */ -static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, - unsigned long ctrl_port, int *irq) -{ - unsigned long reg = data_port; - int i; - int regincr = 1; - - /* The Empeg board has the first two address lines unused */ - if (machine_is_empeg()) - regincr = 1 << 2; - - /* The LART doesn't use A0 for IDE */ - if (machine_is_lart()) - regincr = 1 << 1; - - memset(hw, 0, sizeof(*hw)); - - for (i = 0; i <= 7; i++) { - hw->io_ports_array[i] = reg; - reg += regincr; - } - - hw->io_ports.ctl_addr = ctrl_port; - - if (irq) - *irq = 0; -} - -/* - * This registers the standard ports for this architecture with the IDE - * driver. - */ -static __inline__ void -ide_init_default_hwifs(void) -{ - if (machine_is_lart()) { -#ifdef CONFIG_SA1100_LART - hw_regs_t hw; - - /* Enable GPIO as interrupt line */ - GPDR &= ~LART_GPIO_IDE; - set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING); - - /* set PCMCIA interface timing */ - MECR = 0x00060006; - - /* init the interface */ - ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL); - hw.irq = LART_IRQ_IDE; - ide_register_hw(&hw); -#endif - } -} -- GitLab